source: general/sysutils/sysstat.xml@ cae7a6f

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY sysstat-download-http "http://perso.wanadoo.fr/sebastien.godard/sysstat-&sysstat-version;.tar.xz">
  <!ENTITY sysstat-download-ftp  " ">
  <!ENTITY sysstat-md5sum        "85635dedac6802104a5737195d4effee">
  <!ENTITY sysstat-size          "284 KB">
  <!ENTITY sysstat-buildsize     "6.4 MB">
  <!ENTITY sysstat-time          "0.1 SBU">
]>

<sect1 id="sysstat" xreflabel="Sysstat-&sysstat-version;">
  <?dbhtml filename="sysstat.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>Sysstat-&sysstat-version;</title>

  <indexterm zone="sysstat">
    <primary sortas="a-Sysstat">Sysstat</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to Sysstat</title>

    <para>The <application>Sysstat</application> package contains utilities
    to monitor system performance and usage activity.
    <application>Sysstat</application> contains the <command>sar</command>
    utility, common to many commercial Unixes, and tools you can schedule via
    cron to collect and historize performance and activity data.</para>

    &lfs75_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&sysstat-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&sysstat-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &sysstat-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &sysstat-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &sysstat-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &sysstat-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Sysstat Dependencies</bridgehead>

    <para>There are no build-time requirements for this package; however,
    it is designed to be controlled by a cron daemon such as
    <xref linkend="fcron"/>.</para>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/sysstat"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of Sysstat</title>

    <para>Install <application>Sysstat</application> by running the
    following commands:</para>

<screen><userinput>sa_lib_dir=/usr/lib/sa    \
sa_dir=/var/log/sa        \
conf_dir=/etc/sysconfig   \
./configure --prefix=/usr \
            --disable-man-group &amp;&amp;
make</userinput></screen>

    <para>This package does not come with a test suite.</para>

    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>make install</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para><envar>sa_lib_dir</envar>: This environment variable specifies the
    location of the package-specific library directory.</para>

    <para><envar>sa_dir</envar>: This environment variable specifies the
    location of the directory containing the data files.</para>

    <para><envar>conf_dir</envar>: This environment variable specifies the
    location of the system configuration directory.</para>

    <para><parameter>--disable-man-group</parameter>: This parameter causes
    the installation to ignore the man group variable resulting in the man
    files having
    <systemitem class="username">root</systemitem>:<systemitem class="groupname">root</systemitem>
    ownership.</para>

    <note><para>Run <command>./configure --help</command> to see other influential
    environment variables you can pass to <command>configure</command>. You may
    want to use the <envar>history</envar> and <envar>compressafter</envar>
    variables to customize the amount of data files kept on the system.</para></note>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring Sysstat</title>

    <sect3 id="sysstat-config">
      <title>Config Files</title>

      <para>
        <filename>/etc/sysconfig/sysstat</filename> and
        <filename>/etc/sysconfig/sysstat.ioconf</filename>
      </para>

      <indexterm zone="sysstat sysstat-config">
        <primary sortas="e-etc-sysconfig-sysstat">/etc/sysconfig/sysstat</primary>
      </indexterm>
      <indexterm zone="sysstat sysstat-config">
        <primary sortas="e-etc-sysconfig-sysstat.ioconf">/etc/sysconfig/sysstat.ioconf</primary>
      </indexterm>

    </sect3>

    <sect3>
     <title>Cron Information</title>

      <para>To begin gathering <application>Sysstat</application> history
      information, you must add to, or create a privileged user's crontab. The
      history data location is
      <filename class="directory">/var/log/sa</filename>. The user running
      <application>Sysstat</application> utilities via cron must have write
      access to this location.</para>

      <para>Below is an example of what to install in the crontab. Adjust the
      parameters to suit your needs. Use <command>man sa1</command> and
      <command>man sa2</command> for information about the commands.</para>

<screen><literal># 8am-7pm activity reports every 10 minutes during weekdays
0 8-18 * * 1-5 /usr/lib/sa/sa1 600 6 &amp;

# 7pm-8am activity reports every hour during weekdays
0 19-7 * * 1-5 /usr/lib/sa/sa1 &amp;

# Activity reports every hour on Saturday and Sunday
0 * * * 0,6 /usr/lib/sa/sa1 &amp;

# Daily summary prepared at 19:05
5 19 * * * /usr/lib/sa/sa2 -A &amp;</literal></screen>

    <para>Ensure you submit the revised crontab to the cron daemon.</para>

    </sect3>

    <sect3 id="sysstat-init-systemd">
      <title>Systemd Unit File</title>

      <indexterm zone="sysstat sysstat-init-systemd">
        <primary sortas="f-sysstat">sysstat</primary>
      </indexterm>

      <para>
        This package provides a systemd unit file in the source tarball. 
        To install it, run the following commands as the
        <systemitem class="username">root</systemitem> user:
      </para>

      <para>Install the service</para>
<screen role="root">
<userinput>
install -v -m644 sysstat.service /lib/systemd/system/sysstat.service
</userinput></screen>

      <para>Enable the service</para>
<screen role="root">
<userinput>
systemctl enable sysstat
</userinput></screen>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>cifsiostat, iostat, mpstat, nfsiostat-sysstat, pidstat, sadf,
             and sar</seg>
        <seg>None</seg>
        <seg>/usr/lib/sa, 
             /usr/share/doc/sysstat-&sysstat-version; and,
             /var/log/sa
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="cifsiostat">
        <term><command>cifsiostat</command></term>
        <listitem>
          <para>displays statistics about read and write operations on CIFS
          filesystems.</para>
          <indexterm zone="sysstat cifsiostat">
            <primary sortas="b-cifsiostat">cifsiostat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="iostat">
        <term><command>iostat</command></term>
        <listitem>
          <para>reports CPU statistics and input/output
          statistics for devices and partitions.</para>
          <indexterm zone="sysstat iostat">
            <primary sortas="b-iostat">iostat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="mpstat">
        <term><command>mpstat</command></term>
        <listitem>
          <para>writes activities for each available processor.</para>
          <indexterm zone="sysstat mpstat">
            <primary sortas="b-mpstat">mpstat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="nfsiostat">
        <term><command>nfsiostat-sysstat</command></term>
        <listitem>
          <para>displays statistics about read and write operations on NFS
          filesystems.</para>
          <indexterm zone="sysstat nfsiostat">
            <primary sortas="b-nfsiostat">nfsiostat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="pidstat">
        <term><command>pidstat</command></term>
        <listitem>
          <para>is used for monitoring individual tasks currently being managed
          by the Linux kernel.</para>
          <indexterm zone="sysstat pidstat">
            <primary sortas="b-pidstat">pidstat</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="sadf">
        <term><command>sadf</command></term>
        <listitem>
          <para>is used for displaying the contents of data files created by
          the <command>sar</command> command. But unlike
          <command>sar</command>, <command>sadf</command> can write its data
          in many different formats.</para>
          <indexterm zone="sysstat sadf">
            <primary sortas="b-sadf">sadf</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="sar">
        <term><command>sar</command></term>
        <listitem>
          <para>is used for displaying the contents of elected cumulative activity
          counters in the operating system.</para>
          <indexterm zone="sysstat sar">
            <primary sortas="b-sar">sar</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>