source: BLFS/Makefile@ 3d24e5b

2.4 ablfs-more legacy trunk
Last change on this file since 3d24e5b was 84440e6, checked in by Pierre Labastie <pierre@…>, 8 years ago

Unless explicitely set on the command line, the REV parameter
in BLFS tools make is the same as the preceding used one. Formerly, it
was set to sysv unless defined on the command line

  • Property mode set to 100644
File size: 5.0 KB
RevLine 
[f4ed135]1# From the Build Scripts Written By: Jim Gifford <lfs@jg555.com>
2# Modified By: Joe Ciccone <jciccone@linuxfromscratch.org
3# Additional changes: George Boudreau <georgeb@linuxfromscratch.org>
[e576789]4# Pierre Labastie <pierre.labastie at neuf.fr>
[f4ed135]5
[5795ad7]6# $Id$
[f4ed135]7
[e576789]8ifdef V
9 Q =
10else
11 Q = @
12endif
13
14# Known behavior
[63a051c]15LANG=C
16LC_ALL=C
[e576789]17
[84440e6]18# Makefile should reside in a directory where there are two subdirectories
19# initially:
20TOPDIR = $(shell pwd)
21# the stylesheets
22XSLDIR = $(TOPDIR)/xsl
23# the menu program sources
24MENU = $(TOPDIR)/menu
25
26# Those directories and files will be created and populated by make:
27# directory of the book sources:
28BLFS_XML = $(TOPDIR)/blfs-xml
29# contains the REV used in the preceding call:
30REVFILE = $(TOPDIR)/revision
31# the list of packages:
32PACK_LIST = $(TOPDIR)/packages.xml
33# the generated menu input:
[e576789]34CONFIG_CONFIG_IN = $(TOPDIR)/Config.in
[84440e6]35# menu output:
36CONFIG_OUT = $(TOPDIR)/configuration
37# the linear book:
38BOOK_XML = $(TOPDIR)/book.xml
39
40RENDERTMP = $(BLFS_XML)/tmp
41BLFS_FULL = $(RENDERTMP)/blfs-full.xml
42
43# The right-hand side is updated by jhalfs:
44# Where the tracking file resides:
45TRACKING_DIR = tracking-dir
46
47# Will be created by make, if not existent
48TRACKFILE = $(TRACKING_DIR)/instpkg.xml
[e576789]49
[84440e6]50# Initial content of the tracking file
[e576789]51define INITIAL_TRACK
52<?xml version="1.0" encoding="ISO-8859-1"?>\n\
53\n\
54<!DOCTYPE sublist SYSTEM "$(TOPDIR)/packdesc.dtd">\n\
55<sublist>\n\
56 <name>Installed</name>\n\
57</sublist>
58endef
59
60SVN = svn://svn.linuxfromscratch.org/BLFS/trunk/BOOK
61
62ALLXML := $(filter-out $(RENDERTMP)/%, \
[84440e6]63 $(shell if [ -d $(BLFS_XML) ]; then \
64 find $(BLFS_XML) -name \*.xml; \
65 fi))
[e576789]66ALLXSL := $(filter-out $(RENDERTMP)/%, \
[84440e6]67 $(shell if [ -d $(BLFS_XML) ]; then \
68 find $(BLFS_XML) -name \*.xsl; \
69 fi))
70
71# Try to set the REV variable according to previous runs, except when
72# set on the command line:
73REV1 := $(shell if [ -f $(REVFILE) ] ; then cat $(REVFILE); fi)
74ifneq ($(origin REV),command line)
75 ifdef REV1
76 REV = $(REV1)
77 else
78 REV = not defined
79 endif
80endif
81
82ifneq ($(REV),sysv)
83 ifneq ($(REV),systemd)
84 $(error The REV variable is $(REV), but can only be 'sysv' or 'systemd')
85 endif
86endif
[e576789]87
88$(BOOK_XML): $(CONFIG_OUT)
89 $(Q)$(TOPDIR)/gen_pkg_book.sh $(TOPDIR) $(BLFS_FULL)
[f4ed135]90
[e576789]91$(CONFIG_OUT): $(CONFIG_CONFIG_IN) $(MENU)/mconf
92 $(Q)$(MENU)/mconf $(CONFIG_CONFIG_IN)
[f4ed135]93
[e576789]94$(MENU)/mconf:
95 $(Q)$(MAKE) -C $(MENU) ncurses conf mconf
[f4ed135]96
[e576789]97$(CONFIG_CONFIG_IN): $(PACK_LIST) $(XSLDIR)/gen_config.xsl
98 $(Q)xsltproc --nonet -o $@ $(XSLDIR)/gen_config.xsl $(PACK_LIST)
[f4ed135]99
[e576789]100$(PACK_LIST): $(XSLDIR)/gen_pkg_list.xsl $(XSLDIR)/specialCases.xsl $(TRACKFILE)
101 $(Q)xsltproc --stringparam installed-packages $(TRACKFILE) \
102 -o $@.tmp $(XSLDIR)/gen_pkg_list.xsl $(BLFS_FULL)
103 $(Q)xmllint --postvalid --format -o $@ $@.tmp
104 $(Q)rm $@.tmp
[f4ed135]105
[e576789]106# Beware of the echo '$(INITIAL_TRACK)' command below:
107# if shell is bash or sh linked to bash, needs echo -e
108# if shell is dash or sh linked to dash: echo is enough
109# Don't ask me why
110# So use /bin/echo (needs -e)
111$(TRACKFILE): $(TRACKING_DIR)
112 $(Q)if ! [ -f $@ ]; then \
113 echo Initializing $(TRACKFILE) && \
114 /bin/echo -e '$(INITIAL_TRACK)' > $@ && \
115 $(MAKE) $(PACK_LIST); \
116 fi
117 $(Q)for track in $(TRACKING_DIR)/*-*; do \
118 if [ -f $$track ]; then \
119 pack=$$(echo $$track | sed 's@.*/\(.*\)-[0-9c].*@\1@') && \
120 version=$$(echo $$track | sed 's@.*-\([0-9c].*\)@\1@') && \
121 xsltproc --stringparam packages $(PACK_LIST) \
122 --stringparam package $$pack \
123 --stringparam version $$version \
124 -o track.tmp $(XSLDIR)/bump.xsl $@ && \
125 sed -i 's@PACKDESC@$(TOPDIR)/packdesc.dtd@' track.tmp && \
126 xmllint --format --postvalid track.tmp > $@; \
127 fi; \
128 done; \
129 rm -f track.tmp
130
131$(TRACKING_DIR):
132 @echo Creating $(TRACKING_DIR)
133 $(Q)mkdir -p $@
134
135$(XSLDIR)/specialCases.xsl: $(TOPDIR)/gen-special.sh $(BLFS_FULL)
136 $(Q)$(TOPDIR)/gen-special.sh $(BLFS_FULL) $@
137
[84440e6]138ifneq ($(REV),$(REV1))
139$(BLFS_FULL): FORCE
140endif
[e576789]141$(BLFS_FULL): $(BLFS_XML) $(BLFS_XML)/general.ent $(ALLXML) $(ALLXSL)
142 $(Q)[ -d $(RENDERTMP) ] || mkdir -p $(RENDERTMP)
[4f3c433]143 @echo "Adjusting for revision $(REV)..."
144 $(Q)xsltproc --nonet --xinclude \
145 --stringparam profile.revision $(REV) \
146 --output $(RENDERTMP)/blfs-prof.xml \
147 $(BLFS_XML)/stylesheets/lfs-xsl/profile.xsl \
148 $(BLFS_XML)/index.xml
149 @echo "Validating the book..."
150 $(Q)xmllint --nonet --noent --postvalid \
151 -o $@ $(RENDERTMP)/blfs-prof.xml
[84440e6]152 $(Q)echo $(REV) > $(REVFILE)
[e576789]153
154all: update $(BOOK_XML)
155
156update: $(BLFS_XML)
157 @echo Updating the book sources
158 $(Q)cd $(BLFS_XML) && svn up
159
160$(BLFS_XML):
161 @echo Getting the book sources...
162 $(Q)svn co $(SVN) $@
[f4ed135]163
164# Clean up
165
166clean:
[e576789]167 rm -f $(CONFIG_OUT) $(CONFIG_OUT).old $(TOPDIR)/packages.xml $(XSLDIR)/specialCases.xsl $(CONFIG_CONFIG_IN) book.xml
168 rm -rf $(TOPDIR)/dependencies $(TOPDIR)/book-html $(TOPDIR)/scripts
169 - $(MAKE) -C $(MENU) clean
[f4ed135]170
[84440e6]171FORCE:
172.PHONY: clean all update $(CONFIG_OUT) FORCE
Note: See TracBrowser for help on using the repository browser.