source: BLFS/Makefile@ 67723e1

2.4 ablfs-more legacy trunk
Last change on this file since 67723e1 was 4f3c433, checked in by Pierre Labastie <pierre@…>, 8 years ago

Fix for using the BLFS "double" book. Note that it does not work if one of the
revisions has been rendered, and you want to switch to the other one

  • Property mode set to 100644
File size: 4.1 KB
Line 
1# From the Build Scripts Written By: Jim Gifford <lfs@jg555.com>
2# Modified By: Joe Ciccone <jciccone@linuxfromscratch.org
3# Additional changes: George Boudreau <georgeb@linuxfromscratch.org>
4# Pierre Labastie <pierre.labastie at neuf.fr>
5
6# $Id$
7
8ifeq ($(REV),)
9 REV = sysv
10endif
11
12ifneq ($(REV),sysv)
13 ifneq ($(REV),systemd)
14 $(error The REV variable is $(REV), but can only be 'sysv' or 'systemd')
15 endif
16endif
17
18ifdef V
19 Q =
20else
21 Q = @
22endif
23
24# Known behavior
25LANG=C
26LC_ALL=C
27
28# The right-hand side is updated by jhalfs
29TRACKING_DIR = tracking-dir
30TOPDIR=$(shell pwd)
31BLFS_XML = $(TOPDIR)/blfs-xml
32XSLDIR = $(TOPDIR)/xsl
33
34RENDERTMP = $(BLFS_XML)/tmp
35BLFS_FULL = $(RENDERTMP)/blfs-full.xml
36PACK_LIST = $(TOPDIR)/packages.xml
37MENU = $(TOPDIR)/menu
38CONFIG_CONFIG_IN = $(TOPDIR)/Config.in
39CONFIG_OUT = $(TOPDIR)/configuration
40BOOK_XML = $(TOPDIR)/book.xml
41TRACKFILE = $(TRACKING_DIR)/instpkg.xml
42
43define INITIAL_TRACK
44<?xml version="1.0" encoding="ISO-8859-1"?>\n\
45\n\
46<!DOCTYPE sublist SYSTEM "$(TOPDIR)/packdesc.dtd">\n\
47<sublist>\n\
48 <name>Installed</name>\n\
49</sublist>
50endef
51
52SVN = svn://svn.linuxfromscratch.org/BLFS/trunk/BOOK
53
54ALLXML := $(filter-out $(RENDERTMP)/%, \
55 $(wildcard $(BLFS_XML)/*.xml $(BLFS_XML)/*/*.xml $(BLFS_XML)/*/*/*.xml $(BLFS_XML)/*/*/*/*.xml $(BLFS_XML)/*/*/*/*/*.xml))
56ALLXSL := $(filter-out $(RENDERTMP)/%, \
57 $(wildcard $(BLFS_XML)/*.xsl $(BLFS_XML)/*/*.xsl $(BLFS_XML)/*/*/*.xsl $(BLFS_XML)/*/*/*/*.xsl $(BLFS_XML)/*/*/*/*/*.xsl))
58
59$(BOOK_XML): $(CONFIG_OUT)
60 $(Q)$(TOPDIR)/gen_pkg_book.sh $(TOPDIR) $(BLFS_FULL)
61
62$(CONFIG_OUT): $(CONFIG_CONFIG_IN) $(MENU)/mconf
63 $(Q)$(MENU)/mconf $(CONFIG_CONFIG_IN)
64
65$(MENU)/mconf:
66 $(Q)$(MAKE) -C $(MENU) ncurses conf mconf
67
68$(CONFIG_CONFIG_IN): $(PACK_LIST) $(XSLDIR)/gen_config.xsl
69 $(Q)xsltproc --nonet -o $@ $(XSLDIR)/gen_config.xsl $(PACK_LIST)
70
71$(PACK_LIST): $(XSLDIR)/gen_pkg_list.xsl $(XSLDIR)/specialCases.xsl $(TRACKFILE)
72 $(Q)xsltproc --stringparam installed-packages $(TRACKFILE) \
73 -o $@.tmp $(XSLDIR)/gen_pkg_list.xsl $(BLFS_FULL)
74 $(Q)xmllint --postvalid --format -o $@ $@.tmp
75 $(Q)rm $@.tmp
76
77# Beware of the echo '$(INITIAL_TRACK)' command below:
78# if shell is bash or sh linked to bash, needs echo -e
79# if shell is dash or sh linked to dash: echo is enough
80# Don't ask me why
81# So use /bin/echo (needs -e)
82$(TRACKFILE): $(TRACKING_DIR)
83 $(Q)if ! [ -f $@ ]; then \
84 echo Initializing $(TRACKFILE) && \
85 /bin/echo -e '$(INITIAL_TRACK)' > $@ && \
86 $(MAKE) $(PACK_LIST); \
87 fi
88 $(Q)for track in $(TRACKING_DIR)/*-*; do \
89 if [ -f $$track ]; then \
90 pack=$$(echo $$track | sed 's@.*/\(.*\)-[0-9c].*@\1@') && \
91 version=$$(echo $$track | sed 's@.*-\([0-9c].*\)@\1@') && \
92 xsltproc --stringparam packages $(PACK_LIST) \
93 --stringparam package $$pack \
94 --stringparam version $$version \
95 -o track.tmp $(XSLDIR)/bump.xsl $@ && \
96 sed -i 's@PACKDESC@$(TOPDIR)/packdesc.dtd@' track.tmp && \
97 xmllint --format --postvalid track.tmp > $@; \
98 fi; \
99 done; \
100 rm -f track.tmp
101
102$(TRACKING_DIR):
103 @echo Creating $(TRACKING_DIR)
104 $(Q)mkdir -p $@
105
106$(XSLDIR)/specialCases.xsl: $(TOPDIR)/gen-special.sh $(BLFS_FULL)
107 $(Q)$(TOPDIR)/gen-special.sh $(BLFS_FULL) $@
108
109$(BLFS_FULL): $(BLFS_XML) $(BLFS_XML)/general.ent $(ALLXML) $(ALLXSL)
110 $(Q)[ -d $(RENDERTMP) ] || mkdir -p $(RENDERTMP)
111 @echo "Adjusting for revision $(REV)..."
112 $(Q)xsltproc --nonet --xinclude \
113 --stringparam profile.revision $(REV) \
114 --output $(RENDERTMP)/blfs-prof.xml \
115 $(BLFS_XML)/stylesheets/lfs-xsl/profile.xsl \
116 $(BLFS_XML)/index.xml
117 @echo "Validating the book..."
118 $(Q)xmllint --nonet --noent --postvalid \
119 -o $@ $(RENDERTMP)/blfs-prof.xml
120
121all: update $(BOOK_XML)
122
123update: $(BLFS_XML)
124 @echo Updating the book sources
125 $(Q)cd $(BLFS_XML) && svn up
126
127$(BLFS_XML):
128 @echo Getting the book sources...
129 $(Q)svn co $(SVN) $@
130
131# Clean up
132
133clean:
134 rm -f $(CONFIG_OUT) $(CONFIG_OUT).old $(TOPDIR)/packages.xml $(XSLDIR)/specialCases.xsl $(CONFIG_CONFIG_IN) book.xml
135 rm -rf $(TOPDIR)/dependencies $(TOPDIR)/book-html $(TOPDIR)/scripts
136 - $(MAKE) -C $(MENU) clean
137
138.PHONY: clean all update $(CONFIG_OUT)
Note: See TracBrowser for help on using the repository browser.