source: BLFS/gen-special.sh@ 48700c3

ablfs-more trunk
Last change on this file since 48700c3 was fd4a798, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Remove $Id$ comments, they are useless with git
  • Property mode set to 100755
File size: 10.7 KB
Line 
1#!/bin/bash
2
3#-------------------------------------------------------------------------
4# generates an xsl stylesheet containing a template for special
5# cases in the book:
6# - If the version does not begin with a number, it is impossible to know
7# where the package name ends and where the version begins. We therefore
8# use the ENTITY at the beginning of the validated full-xml.
9# - If a package is part of a group of xorg packages (proto, fonts, etc)
10# there is no easy way to extract it from the xml. We use the ENTITY at
11# the top of each file x7*.xml
12# - Some non-versioned packages are needed as dependencies of others: we
13# attribute version 1.0.0 to them. It is just used to know if the package
14# is installed, by checking inst-version.
15# - If a package is versioned but the version is not mentioned in the book
16# (currently only udev), we retrieve the version by other means
17#-------------------------------------------------------------------------
18# Arguments:
19# $1 contains the name of the validated xml book
20# $2 contains the name of the ouput xsl file
21# $3 contains the name of the book sources directory
22#-------------------------------------------------------------------------
23
24BLFS_XML=$1
25if ! test -f ${BLFS_XML}; then
26 echo File \`${BLFS_XML}\' does not exist
27 exit 1
28fi
29SPECIAL_FILE=$2
30if test -z "${SPECIAL_FILE}"; then SPECIAL_FILE=specialCases.xsl;fi
31BLFS_DIR=$3
32if test -z "${BLFS_DIR}"; then BLFS_DIR=$(cd $(dirname ${BLFS_XML})/.. ; pwd);fi
33
34# Packages whose version does not begin with a number
35EXCEPTIONS=$(grep 'ENTITY.*version[ ]*"[^0-9"&.].*[0-9]' ${BLFS_DIR}/packages.ent |
36 sed 's@^[^"]*"\([^"]*\)".*@\1@')
37
38# Non-versioned packages:
39NV_LIST="postlfs-config-profile postlfs-config-random postlfs-config-vimrc \
40initramfs xorg-env kde-pre-install-config kf5-intro \
41lxqt-pre-install lxqt-post-install ojdk-conf tex-path"
42
43cat >$SPECIAL_FILE << EOF
44<?xml version="1.0" encoding="ISO-8859-1"?>
45
46<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
47 version="1.0">
48
49<xsl:template match='*' mode="special">
50 <xsl:choose>
51<!-- Although versioned, this page is not a package. But
52 the sect2 with id "xorg-env" is referred to at several
53 places in the book. We have added it to the list of non
54 versioned packages. -->
55 <xsl:when test="@id='xorg7'">
56 <xsl:apply-templates select="child::sect2" mode="special"/>
57 </xsl:when>
58EOF
59
60# Non-versionned packages. Add to NV_LIST if you need more.
61for nv_id in $NV_LIST; do
62 cat >>$SPECIAL_FILE << EOF
63 <xsl:when test="@id='$nv_id'">
64 <xsl:text> </xsl:text>
65 <package><xsl:text>&#xA; </xsl:text>
66 <xsl:element name="name">$nv_id</xsl:element>
67 <xsl:text>&#xA; </xsl:text>
68 <xsl:element name="version">1.0.0</xsl:element>
69 <xsl:if
70 test="document(\$installed-packages)//package[name=current()/@id]">
71 <xsl:text>&#xA; </xsl:text>
72 <xsl:element name="inst-version">
73 <xsl:value-of
74 select="document(\$installed-packages
75 )//package[name=current()/@id]/version"/>
76 </xsl:element>
77 </xsl:if>
78<!-- Dependencies -->
79 <xsl:apply-templates select=".//para[@role='required' or
80 @role='recommended' or
81 @role='optional']"
82 mode="dependency"/>
83<!-- End dependencies -->
84 <xsl:text>&#xA; </xsl:text>
85 </package><xsl:text>&#xA;</xsl:text>
86 </xsl:when>
87EOF
88done
89
90# Taking packages inside x7proto etc, as versionned modules.
91# We also write a dependency expansion when a dep is of the form
92# xorg7-something. Since that is another template, we need
93# a temporary file, which we shall concatenate at the end
94cat >tmpfile << EOF
95 <xsl:template name="expand-deps">
96 <xsl:param name="section"/>
97 <xsl:param name="status"/>
98 <xsl:param name="build"/>
99 <xsl:choose>
100EOF
101for file in $(ls ${BLFS_DIR}/x/installing/x7* | grep -v x7driver); do
102 id=$(grep xreflabel $file | sed 's@.*id="\([^"]*\).*@\1@')
103 cat >>$SPECIAL_FILE << EOF
104 <xsl:when test="@id='$id'">
105 <xsl:text> </xsl:text>
106 <package><xsl:text>&#xA; </xsl:text>
107 <xsl:element name="name">$id</xsl:element>
108 <xsl:text>&#xA; </xsl:text>
109EOF
110 cat >> tmpfile << EOF
111 <xsl:when test="\$section='$id'">
112EOF
113# We extract the list of packages for an xorg page from
114# the version part of the .xml file. Seems that
115# the order is not always the same as in the "cat" command.
116# So we have to read that command too, since it may be assumed
117# that the preceding package is a dependency of the following,
118# except the first.
119 list_cat="$(sed -n '/>cat/,/EOF</p' $file | grep -v 'cat\|EOF' |
120 awk '{ print $NF }' | sed 's/-&.*//')"
121
122# Rationale for the sed below: the following for breaks words at spaces (unless
123# we tweak IFS). So replace spaces with commas in lines so that only newlines
124# are separators.
125 for pack in \
126 $(grep 'ENTITY.*version' $file | sed 's/[ ]\+/,/g'); do
127 packname=$(echo $pack | sed s'@.*ENTITY,\(.*\)-version.*@\1@')
128 packversion=$(echo $pack | sed 's@[^"]*"\([^"]*\).*@\1@')
129 precpack=NONE
130 for i in $list_cat; do
131 if [ "$i" = "$packname" ]; then break; fi
132 precpack=$i
133 done
134# It may happen that packname is not in list_cat, because its entity
135# is commented out in the xml, but we do not check that (too complicated).
136# In that case, the whole list is scanned, and $precpack=$i at the end.
137# when packname is found in the list $precpack!=$i.
138 if [ "$precpack" = "$i" ]; then continue; fi
139 cat >>$SPECIAL_FILE << EOF
140 <module><xsl:text>&#xA; </xsl:text>
141 <xsl:element name="name">$packname</xsl:element>
142 <xsl:element name="version">$packversion</xsl:element>
143 <xsl:if test="document(\$installed-packages)//package[name='$packname']">
144 <xsl:element name="inst-version">
145 <xsl:value-of
146 select="document(\$installed-packages
147 )//package[name='$packname']/version"/>
148 </xsl:element>
149 </xsl:if>
150<!-- Dependencies -->
151EOF
152 if test $precpack != NONE; then
153 cat >>$SPECIAL_FILE << EOF
154 <xsl:element name="dependency">
155 <xsl:attribute name="status">required</xsl:attribute>
156 <xsl:attribute name="build">before</xsl:attribute>
157 <xsl:attribute name="name">$precpack</xsl:attribute>
158 <xsl:attribute name="type">ref</xsl:attribute>
159 </xsl:element>
160EOF
161 else
162 cat >>$SPECIAL_FILE << EOF
163 <xsl:apply-templates select=".//para[@role='required' or
164 @role='recommended' or
165 @role='optional']"
166 mode="dependency"/>
167EOF
168 fi
169 cat >>$SPECIAL_FILE << EOF
170<!-- End dependencies -->
171 </module>
172EOF
173 cat >> tmpfile << EOF
174 <xsl:element name="dependency">
175 <xsl:attribute name="status">
176 <xsl:value-of select="\$status"/>
177 </xsl:attribute>
178 <xsl:attribute name="build">
179 <xsl:value-of select="\$build"/>
180 </xsl:attribute>
181 <xsl:attribute name="name">$packname</xsl:attribute>
182 <xsl:attribute name="type">ref</xsl:attribute>
183 </xsl:element>
184EOF
185 done
186 cat >>$SPECIAL_FILE << EOF
187 </package>
188 </xsl:when>
189EOF
190 cat >> tmpfile << EOF
191 </xsl:when>
192EOF
193done
194
195for ver_ent in $EXCEPTIONS; do
196 id=$(grep 'xreflabel=".*'$ver_ent $BLFS_XML | sed 's@.*id="\([^"]*\)".*@\1@')
197 [[ -z $id ]] && continue
198 cat >>$SPECIAL_FILE << EOF
199 <xsl:when test="@id='$id'">
200<!-- if there is a sect1 ancestor, we have a module -->
201 <xsl:choose>
202 <xsl:when test="ancestor::sect1">
203 <xsl:text> </xsl:text>
204 <module><xsl:text>&#xA; </xsl:text>
205 <xsl:element name="name">$id</xsl:element>
206 <xsl:text>&#xA; </xsl:text>
207 <xsl:element name="version">$ver_ent</xsl:element>
208 <xsl:if
209 test="document(\$installed-packages)//package[name=current()/@id]">
210 <xsl:text>&#xA; </xsl:text>
211 <xsl:element name="inst-version">
212 <xsl:value-of
213 select="document(\$installed-packages
214 )//package[name=current()/@id]/version"/>
215 </xsl:element>
216 </xsl:if>
217<!-- Dependencies -->
218 <xsl:apply-templates select=".//para[@role='required' or
219 @role='recommended' or
220 @role='optional']"
221 mode="dependency"/>
222<!-- End dependencies -->
223 <xsl:text>&#xA; </xsl:text>
224 </module><xsl:text>&#xA;</xsl:text>
225 </xsl:when>
226 <xsl:otherwise>
227 <xsl:text> </xsl:text>
228 <package><xsl:text>&#xA; </xsl:text>
229 <xsl:element name="name">$id</xsl:element>
230 <xsl:text>&#xA; </xsl:text>
231 <xsl:element name="version">$ver_ent</xsl:element>
232 <xsl:if
233 test="document(\$installed-packages)//package[name=current()/@id]">
234 <xsl:text>&#xA; </xsl:text>
235 <xsl:element name="inst-version">
236 <xsl:value-of
237 select="document(\$installed-packages
238 )//package[name=current()/@id]/version"/>
239 </xsl:element>
240 </xsl:if>
241<!-- Dependencies -->
242 <xsl:apply-templates select=".//para[@role='required' or
243 @role='recommended' or
244 @role='optional']"
245 mode="dependency"/>
246<!-- End dependencies -->
247 <xsl:text>&#xA; </xsl:text>
248 </package><xsl:text>&#xA;</xsl:text>
249 </xsl:otherwise>
250 </xsl:choose>
251 </xsl:when>
252EOF
253done
254
255cat >>$SPECIAL_FILE << EOF
256 <xsl:otherwise>
257 <xsl:apply-templates
258 select="self::node()[contains(translate(@xreflabel,
259 '123456789',
260 '000000000'),
261 '-0')
262 ]"
263 mode="normal"/>
264 </xsl:otherwise>
265 </xsl:choose>
266</xsl:template>
267EOF
268cat $SPECIAL_FILE tmpfile > tmpfile1
269mv tmpfile1 $SPECIAL_FILE
270rm tmpfile
271cat >> $SPECIAL_FILE << EOF
272 <xsl:otherwise>
273 <xsl:message>
274 <xsl:text>You should not be seeing this</xsl:text>
275 </xsl:message>
276 </xsl:otherwise>
277 </xsl:choose>
278</xsl:template>
279</xsl:stylesheet>
280EOF
Note: See TracBrowser for help on using the repository browser.