Context Navigation

source: CLFS/clfs.xsl@ c8d5f11

ablfs-more legacy trunk

Last change on this file since c8d5f11 was 489bdc2, checked in by Pierre Labastie <pierre@…>, 7 years ago
Always generate test instructions, and comment unwanted ones out. Fixes ticket #1695, also for CLFS...
Property mode set to `100644`
File size: 18.5 KB

Rev	Line
[877cc6a]	1	<?xml version="1.0"?>
	2	<!DOCTYPE xsl:stylesheet [
	3	<!ENTITY % general-entities SYSTEM "FAKEDIR/general.ent">
	4	%general-entities;
	5	]>
	6
	7	<!-- $Id$ -->
	8
[269d81c]	9	<xsl:stylesheet
	10	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
[877cc6a]	11	xmlns:exsl="http://exslt.org/common"
	12	extension-element-prefixes="exsl"
	13	version="1.0">
	14
	15	<!-- XSLT stylesheet to create shell scripts from CLFS books. -->
	16
	17	<!-- Build method used -->
	18	<xsl:param name="method" select="chroot"/>
	19
	20	<!-- Run test suites?
	21	0 = none
	22	1 = only Glibc, GCC and Binutils testsuites
	23	2 = all testsuites
[28f4756]	24	3 = alias to 2
	25	-->
[877cc6a]	26	<xsl:param name="testsuite" select="1"/>
	27
[28f4756]	28	<!-- Bomb on test suites failures?
[401f81e]	29	n = no, I want to build the full system and review the logs
	30	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	31	-->
[401f81e]	32	<xsl:param name="bomb-testsuite" select="n"/>
[28f4756]	33
[269d81c]	34	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
	35	<xsl:param name="vim-lang" select="n"/>
[877cc6a]	36
	37	<!-- Time zone -->
[a229600]	38	<xsl:param name="timezone" select="GMT"/>
[877cc6a]	39
	40	<!-- Page size -->
	41	<xsl:param name="page" select="letter"/>
	42
	43	<!-- Locale settings -->
[a229600]	44	<xsl:param name="lang" select="C"/>
[877cc6a]	45
[650acce]	46	<!-- Sparc64 processor type -->
[c93f2b0]	47	<xsl:param name="sparc" select="none"/>
[650acce]	48
[3f83cb0]	49	<!-- x86 32 bit target triplet -->
	50	<xsl:param name="x86" select="i686-pc-linux-gnu"/>
	51
	52	<!-- mips target triplet -->
	53	<xsl:param name="mips" select="mips-unknown-linux-gnu"/>
	54
[877cc6a]	55	<xsl:template match="/">
	56	<xsl:apply-templates select="//sect1"/>
	57	</xsl:template>
	58
	59	<xsl:template match="sect1">
	60	<xsl:choose>
	61	<xsl:when test="../@id='chapter-partitioning' or
[3f83cb0]	62	../@id='chapter-getting-materials'"/>
[877cc6a]	63	<xsl:when test="../@id='chapter-testsuite-tools' and $testsuite='0'"/>
	64	<xsl:when test="../@id='chapter-boot' and $method='chroot'"/>
	65	<xsl:when test="../@id='chapter-chroot' and $method='boot'"/>
	66	<xsl:otherwise>
	67	<xsl:if test="count(descendant::screen/userinput) > 0 and
	68	count(descendant::screen/userinput) >
	69	count(descendant::screen[@role='nodump'])">
	70	<!-- The dirs names -->
	71	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	72	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	73	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	74	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
	75	<!-- The file names -->
	76	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	77	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	78	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	79	<!-- The build order -->
	80	<xsl:variable name="position" select="position()"/>
	81	<xsl:variable name="order">
	82	<xsl:choose>
	83	<xsl:when test="string-length($position) = 1">
	84	<xsl:text>00</xsl:text>
	85	<xsl:value-of select="$position"/>
	86	</xsl:when>
	87	<xsl:when test="string-length($position) = 2">
	88	<xsl:text>0</xsl:text>
	89	<xsl:value-of select="$position"/>
	90	</xsl:when>
	91	<xsl:otherwise>
	92	<xsl:value-of select="$position"/>
	93	</xsl:otherwise>
	94	</xsl:choose>
	95	</xsl:variable>
	96	<!-- Creating dirs and files -->
	97	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
[1330ebc]	98	<xsl:choose>
	99	<xsl:when test="@id='ch-chroot-changingowner' or
	100	@id='ch-chroot-creatingdirs' or
[7d6fe10]	101	@id='ch-chroot-createfiles' or
	102	@id='ch-system-stripping'">
[1330ebc]	103	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	104	</xsl:when>
	105	<xsl:otherwise>
	106	<xsl:text>#!/bin/bash set +h </xsl:text>
	107	</xsl:otherwise>
	108	</xsl:choose>
[5f4982d]	109	<xsl:if test="not(@id='ch-system-stripping')">
	110	<xsl:text>set -e</xsl:text>
	111	</xsl:if>
	112	<xsl:text> </xsl:text>
[58b186c]	113	<xsl:if test="sect2[@role='installation'] and
	114	not(@id='ch-system-multiarch-wrapper')">
[877cc6a]	115	<xsl:text>cd $PKGDIR </xsl:text>
[401f81e]	116	<xsl:if test="@id='ch-system-vim' and $vim-lang = 'y'">
[877cc6a]	117	<xsl:text>tar -xvf ../vim-&vim-version;-lang.* --strip-components=1 </xsl:text>
	118	</xsl:if>
	119	</xsl:if>
	120	<xsl:apply-templates select=".//para/userinput \| .//screen"/>
[68713c9]	121	<xsl:if test="not(@id='ch-chroot-chroot')">
	122	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
	123	</xsl:if>
[877cc6a]	124	<xsl:text>exit</xsl:text>
	125	</exsl:document>
	126	</xsl:if>
	127	</xsl:otherwise>
	128	</xsl:choose>
	129	</xsl:template>
	130
	131	<xsl:template match="screen">
	132	<xsl:if test="child::* = userinput and not(@role = 'nodump')">
	133	<xsl:apply-templates select="userinput" mode="screen"/>
	134	</xsl:if>
	135	</xsl:template>
	136
	137	<xsl:template match="para/userinput">
	138	<xsl:if test="(contains(string(),'test') or
	139	contains(string(),'check')) and
[489bdc2]	140	not($testsuite = '2' or $testsuite = '3')">
	141	<xsl:text># </xsl:text>
[877cc6a]	142	</xsl:if>
[489bdc2]	143	<xsl:choose>
	144	<xsl:when test="$bomb-testsuite = 'n'">
	145	<xsl:value-of select="substring-before(string(),'make')"/>
	146	<xsl:text>make -k</xsl:text>
	147	<xsl:value-of select="substring-after(string(),'make')"/>
	148	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	149	</xsl:when>
	150	<xsl:otherwise>
	151	<xsl:apply-templates/>
	152	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	153	<xsl:if test="contains(string(),' -k ')">
	154	<xsl:text> \|\| true</xsl:text>
	155	</xsl:if>
	156	<xsl:text> </xsl:text>
	157	</xsl:otherwise>
	158	</xsl:choose>
[877cc6a]	159	</xsl:template>
	160
	161	<xsl:template match="userinput" mode="screen">
	162	<xsl:choose>
	163	<!-- Estandarized package formats -->
	164	<xsl:when test="contains(string(),'tar.gz')">
	165	<xsl:value-of select="substring-before(string(),'tar.gz')"/>
	166	<xsl:text>tar.*</xsl:text>
	167	<xsl:value-of select="substring-after(string(),'tar.gz')"/>
	168	<xsl:text> </xsl:text>
	169	</xsl:when>
	170	<!-- Setting $LANG for /etc/profile -->
	171	<xsl:when test="ancestor::sect1[@id='ch-scripts-profile'] and
	172	contains(string(),'export LANG=')">
	173	<xsl:value-of select="substring-before(string(),'export LANG=')"/>
	174	<xsl:text>export LANG=</xsl:text>
	175	<xsl:value-of select="$lang"/>
	176	<xsl:value-of select="substring-after(string(),'charmap]')"/>
	177	<xsl:text> </xsl:text>
	178	</xsl:when>
[f4caf9c]	179	<!-- Compile the keymap into the kernel has been disabled for 1.0 -->
	180	<xsl:when test="contains(string(),'defkeymap')"/>
[877cc6a]	181	<!-- Copying the kernel config file -->
	182	<xsl:when test="string() = 'make mrproper'">
	183	<xsl:text>make mrproper </xsl:text>
	184	<xsl:if test="ancestor::sect1[@id='ch-boot-kernel']">
	185	<xsl:text>cp -v ../bootkernel-config .config </xsl:text>
	186	</xsl:if>
	187	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
	188	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	189	</xsl:if>
	190	</xsl:when>
	191	<!-- No interactive commands are needed if the .config file is the proper one -->
	192	<xsl:when test="contains(string(),'menuconfig')"/>
[c3b96a9]	193	<!-- test instructions -->
[489bdc2]	194	<xsl:when test="@remap = 'test'">
	195	<xsl:if test="not(ancestor::note[@os='a00'] and $method='chroot')">
	196	<!-- Avoid executing the note before perl tests while in 'chroot' -->
	197	<xsl:if test="
	198	$testsuite = '0' or
	199	$testsuite = '1' and
	200	not(ancestor::sect1[@id='ch-system-gcc']) and
	201	not(ancestor::sect1[contains(@id,'ch-system-eglibc')]) and
	202	not(ancestor::sect1[contains(@id,'ch-system-glibc')]) and
	203	not(ancestor::sect1[contains(@id,'ch-system-gmp')]) and
	204	not(ancestor::sect1[contains(@id,'ch-system-mpfr')]) and
	205	not(ancestor::sect1[contains(@id,'ch-system-mpc')]) and
	206	not(ancestor::sect1[contains(@id,'ch-system-ppl')]) and
	207	not(ancestor::sect1[contains(@id,'ch-system-isl')]) and
	208	not(ancestor::sect1[contains(@id,'ch-system-cloog')]) and
	209	not(ancestor::sect1[contains(@id,'ch-system-cloog-ppl')]) and
	210	not(ancestor::sect1[@id='ch-system-binutils'])">
	211	<xsl:text># </xsl:text>
	212	</xsl:if>
	213	<xsl:choose>
	214	<xsl:when test="$bomb-testsuite = 'n'">
	215	<xsl:choose>
	216	<!-- special case for (e)glibc -->
	217	<xsl:when test="contains(string(), 'glibc-check-log')">
	218	<xsl:value-of
	219	select="substring-before(string(),'2>&1')"/>
	220	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	221	</xsl:when>
	222	<!-- special case for procps-ng -->
	223	<xsl:when test="contains(string(), 'pushd')">
	224	<xsl:text>{ </xsl:text>
	225	<xsl:apply-templates/>
	226	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	227	</xsl:when>
	228	<xsl:when test="contains(string(), 'make -k')">
	229	<xsl:apply-templates/>
	230	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	231	</xsl:when>
	232	<xsl:when test="contains(string(), 'make')">
	233	<xsl:value-of select="substring-before(string(),'make')"/>
	234	<xsl:text>make -k</xsl:text>
	235	<xsl:value-of select="substring-after(string(),'make')"/>
	236	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	237	</xsl:when>
	238	<xsl:otherwise>
	239	<xsl:apply-templates/>
	240	<xsl:if test="not(contains(string(), '>>'))">
	241	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	242	</xsl:if>
	243	<xsl:text> </xsl:text>
	244	</xsl:otherwise>
	245	</xsl:choose>
	246	</xsl:when>
	247	<xsl:otherwise>
	248	<!-- bomb-testsuite != 'n'-->
	249	<xsl:choose>
	250	<!-- special case for (e)glibc -->
	251	<xsl:when test="contains(string(), 'glibc-check-log')">
	252	<xsl:value-of
	253	select="substring-before(string(),'2>&1')"/>
	254	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	255	</xsl:when>
	256	<!-- special case for gmp -->
	257	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	258	<xsl:text>(</xsl:text>
	259	<xsl:apply-templates/>
	260	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	261	</xsl:when>
	262	<!-- special case for procps-ng -->
	263	<xsl:when test="contains(string(), 'pushd')">
	264	<xsl:text>{ </xsl:text>
	265	<xsl:apply-templates/>
	266	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	267	</xsl:when>
	268	<xsl:when test="contains(string(), 'make -k')">
	269	<xsl:apply-templates/>
	270	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	271	</xsl:when>
	272	<xsl:otherwise>
	273	<xsl:apply-templates/>
	274	<xsl:if test="not(contains(string(), '>>'))">
	275	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	276	</xsl:if>
	277	<xsl:text> </xsl:text>
	278	</xsl:otherwise>
	279	</xsl:choose>
	280	</xsl:otherwise>
	281	</xsl:choose>
	282	</xsl:if><!-- avoid executing note before perl tests -->
[a229600]	283	</xsl:when>
[c3b96a9]	284	<!-- End of test instructions -->
	285
[608fbe1]	286	<!-- Fixing toolchain test suites run XXX more to fix -->
[ee2c45c]	287	<xsl:when test="contains(string(),'glibc-check-log')">
[877cc6a]	288	<xsl:choose>
	289	<xsl:when test="$testsuite != '0'">
[269d81c]	290	<xsl:value-of select="substring-before(string(),'2>')"/>
[28f4756]	291	<xsl:choose>
[401f81e]	292	<xsl:when test="$bomb-testsuite = 'n'">
[269d81c]	293	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[28f4756]	294	</xsl:when>
	295	<xsl:otherwise>
[269d81c]	296	<xsl:text>>> $TEST_LOG 2>&1</xsl:text>
[a1f1969]	297	<xsl:if test="contains(string(),' -k ')">
	298	<xsl:text> \|\| true</xsl:text>
	299	</xsl:if>
	300	<xsl:text> </xsl:text>
[28f4756]	301	</xsl:otherwise>
	302	</xsl:choose>
[877cc6a]	303	</xsl:when>
	304	</xsl:choose>
	305	</xsl:when>
[269d81c]	306	<xsl:when test="string() = 'make check' or
	307	contains(string(), 'make -k check')">
[877cc6a]	308	<xsl:choose>
	309	<xsl:when test="$testsuite != '0'">
[28f4756]	310	<xsl:choose>
[401f81e]	311	<xsl:when test="$bomb-testsuite = 'n'">
[269d81c]	312	<xsl:text>make -k check >> $TEST_LOG 2>&1 \|\| true </xsl:text>
[28f4756]	313	</xsl:when>
	314	<xsl:otherwise>
[269d81c]	315	<xsl:apply-templates/>
	316	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
[a1f1969]	317	<xsl:if test="contains(string(),' -k ')">
	318	<xsl:text> \|\| true</xsl:text>
	319	</xsl:if>
	320	<xsl:text> </xsl:text>
[28f4756]	321	</xsl:otherwise>
	322	</xsl:choose>
[877cc6a]	323	</xsl:when>
	324	</xsl:choose>
	325	</xsl:when>
	326	<xsl:when test="contains(string(),'test_summary') or
	327	contains(string(),'expect -c')">
	328	<xsl:choose>
	329	<xsl:when test="$testsuite != '0'">
	330	<xsl:apply-templates/>
[28f4756]	331	<xsl:text> >> $TEST_LOG </xsl:text>
[877cc6a]	332	</xsl:when>
	333	</xsl:choose>
	334	</xsl:when>
	335	<!-- Don't stop on strip run -->
	336	<xsl:when test="contains(string(),'strip ')">
	337	<xsl:apply-templates/>
	338	<xsl:text> \|\| true </xsl:text>
	339	</xsl:when>
[433a5d4]	340	<!-- Add -j1 to make install commands -->
	341	<xsl:when test="contains(string(),'make ') and
	342	contains(string(),'install')">
	343	<xsl:value-of select="substring-before(string(),'make ')"/>
	344	<xsl:text>make -j1 </xsl:text>
	345	<xsl:value-of select="substring-after(string(),'make ')"/>
	346	<xsl:text> </xsl:text>
	347	</xsl:when>
[877cc6a]	348	<!-- The rest of commands -->
	349	<xsl:otherwise>
	350	<xsl:apply-templates/>
	351	<xsl:text> </xsl:text>
	352	</xsl:otherwise>
	353	</xsl:choose>
	354	</xsl:template>
	355
	356	<xsl:template match="replaceable">
	357	<xsl:choose>
	358	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	359	<xsl:value-of select="$timezone"/>
	360	</xsl:when>
[608fbe1]	361	<xsl:when test="ancestor::sect1[@id='ch-system-eglibc']">
	362	<xsl:value-of select="$timezone"/>
	363	</xsl:when>
[877cc6a]	364	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
	365	<xsl:value-of select="$page"/>
	366	</xsl:when>
[650acce]	367	<xsl:when test="ancestor::sect1[@id='ch-cross-tools-flags']">
	368	<xsl:choose>
	369	<xsl:when test="contains(string(),'BUILD32')">
	370	<xsl:choose>
	371	<xsl:when test="$sparc = '1' or $sparc = '2'">
	372	<xsl:text>-m32 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	373	</xsl:when>
	374	<xsl:when test="$sparc = '3'">
	375	<xsl:text>-m32 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	376	</xsl:when>
	377	</xsl:choose>
	378	</xsl:when>
	379	<xsl:when test="contains(string(),'BUILD64')">
	380	<xsl:choose>
	381	<xsl:when test="$sparc = '1' or $sparc = '2'">
[3f83cb0]	382	<xsl:text>-m64 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	383	</xsl:when>
	384	<xsl:when test="$sparc = '3'">
	385	<xsl:text>-m64 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	386	</xsl:when>
	387	</xsl:choose>
	388	</xsl:when>
	389	<xsl:when test="contains(string(),'GCCTARGET')">
	390	<xsl:choose>
	391	<xsl:when test="$sparc = '1' or $sparc = '2'">
	392	<xsl:text>-mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	393	</xsl:when>
	394	<xsl:when test="$sparc = '3'">
	395	<xsl:text>-mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	396	</xsl:when>
	397	</xsl:choose>
	398	</xsl:when>
	399	</xsl:choose>
	400	</xsl:when>
	401	<xsl:when test="ancestor::sect1[@id='ch-final-preps-variables']">
	402	<xsl:choose>
	403	<xsl:when test="contains(string(),'target triplet')">
	404	<xsl:value-of select="$x86"/>
	405	</xsl:when>
	406	<xsl:when test="contains(string(),'mips')">
	407	<xsl:value-of select="$mips"/>
	408	</xsl:when>
	409	<xsl:when test="contains(string(),'BUILD32')">
	410	<xsl:choose>
	411	<xsl:when test="$sparc = '1' or $sparc = '2'">
	412	<xsl:text>-m32 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	413	</xsl:when>
	414	<xsl:when test="$sparc = '3'">
	415	<xsl:text>-m32 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	416	</xsl:when>
	417	</xsl:choose>
	418	</xsl:when>
	419	<xsl:when test="contains(string(),'BUILD64')">
	420	<xsl:choose>
	421	<xsl:when test="$sparc = '1' or $sparc = '2'">
[650acce]	422	<xsl:text>-m64 -mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	423	</xsl:when>
	424	<xsl:when test="$sparc = '3'">
	425	<xsl:text>-m64 -mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	426	</xsl:when>
	427	</xsl:choose>
	428	</xsl:when>
	429	<xsl:when test="contains(string(),'GCCTARGET')">
	430	<xsl:choose>
	431	<xsl:when test="$sparc = '1' or $sparc = '2'">
	432	<xsl:text>-mcpu=ultrasparc -mtune=ultrasparc</xsl:text>
	433	</xsl:when>
	434	<xsl:when test="$sparc = '3'">
	435	<xsl:text>-mcpu=ultrasparc3 -mtune=ultrasparc3</xsl:text>
	436	</xsl:when>
	437	</xsl:choose>
	438	</xsl:when>
	439	</xsl:choose>
	440	</xsl:when>
[877cc6a]	441	<xsl:otherwise>
	442	<xsl:text>**EDITME</xsl:text>
	443	<xsl:apply-templates/>
	444	<xsl:text>EDITME**</xsl:text>
	445	</xsl:otherwise>
	446	</xsl:choose>
	447	</xsl:template>
	448
	449	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: