Context Navigation

source: CLFS/master.sh@ 0e97a6a

experimental

Last change on this file since 0e97a6a was 30737ea8, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Renamed user-{c,h}lfs-exist to luser-exist. Renamed restore-{c,h}lfs-env to restore-luser-env.
Property mode set to `100755`
File size: 41.9 KB

Rev	Line
[0170229]	1	#!/bin/sh
[1ce084e]	2	# $Id$
[0170229]	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9
	10	#----------------------------#
[fcaf131]	11	host_prep_Makefiles() { # Initialization of the system
[0170229]	12	#----------------------------#
[3b63c8c]	13	local CLFS_HOST
[0170229]	14
	15	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files${R_arrow}"
	16
	17	# defined here, only for ease of reading
[3b63c8c]	18	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[0170229]	19	(
	20	cat << EOF
	21	023-creatingtoolsdir:
	22	@\$(call echo_message, Building)
[9199a13]	23	@mkdir \$(MOUNT_PT)/tools && \\
	24	rm -f /tools && \\
	25	ln -s \$(MOUNT_PT)/tools /
[0170229]	26	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	27	mkdir \$(MOUNT_PT)/sources; \\
	28	fi;
	29	@chmod a+wt \$(MOUNT_PT)/sources && \\
[9199a13]	30	touch \$@ && \\
	31	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	32	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	33
	34	024-creatingcrossdir: 023-creatingtoolsdir
	35	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[9199a13]	36	rm -f /cross-tools && \\
	37	ln -s \$(MOUNT_PT)/cross-tools /
	38	@touch \$@ && \\
	39	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	40	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	41
	42	025-addinguser: 024-creatingcrossdir
	43	@\$(call echo_message, Building)
[9485eba]	44	@if [ ! -d /home/\$(LUSER) ]; then \\
	45	groupadd \$(LGROUP); \\
	46	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[0170229]	47	else \\
[30737ea8]	48	touch luser-exist; \\
[0170229]	49	fi;
[9485eba]	50	@chown \$(LUSER) \$(MOUNT_PT) && \\
	51	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
	52	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
	53	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
[9199a13]	54	touch \$@ && \\
	55	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	56	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	57
	58	026-settingenvironment: 025-addinguser
	59	@\$(call echo_message, Building)
[9485eba]	60	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	61	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[0170229]	62	fi;
[9485eba]	63	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	64	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[0170229]	65	fi;
[9485eba]	66	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	67	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	68	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	69	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	70	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	71	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	72	echo "" >> /home/\$(LUSER)/.bashrc && \\
	73	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	74	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	75	echo "" >> /home/\$(LUSER)/.bashrc && \\
	76	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	77	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	78	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	79	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	80	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[0170229]	81	touch envars && \\
[9199a13]	82	touch \$@ && \\
	83	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	84	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	85	EOF
	86	) >> $MKFILE.tmp
	87
	88	}
	89
	90
	91
	92	#-----------------------------#
	93	cross_tools_Makefiles() { #
	94	#-----------------------------#
	95	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools${R_arrow}"
	96
	97	for file in cross-tools/* ; do
	98	# Keep the script file name
	99	this_script=`basename $file`
	100	#
	101	# Skip this script...
	102	case $this_script in
	103	cflags \| variables ) # work done in host_prep_Makefiles
	104	continue; ;;
	105	*) ;;
	106	esac
	107	#
	108	# Set the dependency for the first target.
	109	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	110
	111	# First append each name of the script files to a list (this will become
	112	# the names of the targets in the Makefile
	113	cross_tools="$cross_tools $this_script"
	114
	115	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	116	# and binutils in chapter 5)
	117	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	118	-e 's@-static@@' \
	119	-e 's@-final@@' \
[3b63c8c]	120	-e 's@-64@@' \
[0170229]	121	-e 's@-n32@@'`
[3b63c8c]	122	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	123
	124	#--------------------------------------------------------------------#
	125	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	126	#--------------------------------------------------------------------#
	127	#
	128	# Drop in the name of the target on a new line, and the previous target
	129	# as a dependency. Also call the echo_message function.
[3e1c0e2]	130	wrt_target "${this_script}" "$PREV"
[0170229]	131	#
[3b63c8c]	132	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	133	#
[9485eba]	134	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[0170229]	135	#
[9485eba]	136	wrt_RunAsUser "${this_script}" "${file}"
[0170229]	137	#
[3b63c8c]	138	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	139	#
	140	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	141	wrt_touch
[0170229]	142	#
	143	#--------------------------------------------------------------------#
	144	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	145	#--------------------------------------------------------------------#
	146	#
	147	# Keep the script file name for Makefile dependencies.
	148	PREV=$this_script
	149
	150	done # for file in ....
	151	}
	152
	153
	154	#-----------------------------#
	155	temptools_Makefiles() { #
	156	#-----------------------------#
	157	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system${R_arrow}"
	158
	159	for file in temp-system/* ; do
	160	# Keep the script file name
	161	this_script=`basename $file`
[3b63c8c]	162	#
	163	# Deal with any odd scripts..
	164	case $this_script in
	165	*choose) # The choose script will fail if you cannot enter the new environment
	166	# If the 'boot' build method was chosen don't run the script
	167	[[ $METHOD = "boot" ]] && continue; ;;
	168	*) ;;
	169	esac
	170
[0170229]	171	#
	172	# First append each name of the script files to a list (this will become
	173	# the names of the targets in the Makefile
	174	temptools="$temptools $this_script"
	175
	176	#
	177	# Grab the name of the target, strip id number, XXX-script
	178	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	179	#
[3b63c8c]	180	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	181
	182	#--------------------------------------------------------------------#
	183	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	184	#--------------------------------------------------------------------#
	185	#
	186	# Drop in the name of the target on a new line, and the previous target
	187	# as a dependency. Also call the echo_message function.
[3e1c0e2]	188	wrt_target "${this_script}" "$PREV"
[0170229]	189	#
[3b63c8c]	190	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	191	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	192	#
[9485eba]	193	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[3b63c8c]	194	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	195	#
[9485eba]	196	wrt_RunAsUser "${this_script}" "${file}"
[0170229]	197	#
[3b63c8c]	198	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	199	#
	200	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	201	wrt_touch
[0170229]	202	#
	203	#--------------------------------------------------------------------#
	204	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	205	#--------------------------------------------------------------------#
	206	#
	207	# Keep the script file name for Makefile dependencies.
	208	PREV=$this_script
	209	done # for file in ....
	210	}
	211
	212
	213	#-----------------------------#
	214	boot_Makefiles() { #
	215	#-----------------------------#
	216	echo "${tab_}${GREEN}Processing... ${L_arrow}boot${R_arrow}"
	217
	218	for file in boot/* ; do
	219	# Keep the script file name
	220	this_script=`basename $file`
	221
	222	# A little housekeeping on the scripts
	223	case $this_script in
[6d3564b]	224	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
[0170229]	225	whatnext) continue ;;
[0271c0c]	226	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	227	[[ -z $CONFIG ]] && continue
[0271c0c]	228	# Copy the config file to /sources with a standardized name
[6eef5ef]	229	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
[0170229]	230	;;
	231	esac
	232	#
	233	# First append each name of the script files to a list (this will become
	234	# the names of the targets in the Makefile
	235	boottools="$boottools $this_script"
	236	#
	237	# Grab the name of the target, strip id number and misc words.
	238	case $this_script in
[6d3564b]	239	*kernel) name=linux ;;
[fcaf131]	240	*bootscripts) name="bootscripts-cross-lfs" ;;
[9dc8222]	241	*udev-rules) name="udev-cross-lfs" ;;
[6d3564b]	242	*grub-build) name=grub ;;
	243	*-aboot-build) name=aboot ;;
	244	*yaboot-build) name=yaboot ;;
	245	*colo-build) name=colo ;;
	246	*silo-build) name=silo ;;
	247	*arcload-build) name=arcload ;;
	248	*lilo-build) name=lilo ;;
[0170229]	249	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	250	esac
[3b63c8c]	251	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
	252	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	253
	254	#--------------------------------------------------------------------#
	255	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	256	#--------------------------------------------------------------------#
	257	#
	258	# Drop in the name of the target on a new line, and the previous target
	259	# as a dependency. Also call the echo_message function.
[3e1c0e2]	260	wrt_target "${this_script}" "$PREV"
[0170229]	261	#
[3b63c8c]	262	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	263	# Insert instructions for unpacking the package and changing directories
	264	#
[9485eba]	265	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[3b63c8c]	266	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	267	#
	268	# Select a script execution method
	269	case $this_script in
[9485eba]	270	changingowner) wrt_RunAsRoot "${this_script}" "${file}" ;;
	271	devices) wrt_RunAsRoot "${this_script}" "${file}" ;;
[0170229]	272	fstab) if [[ -n "$FSTAB" ]]; then
	273	wrt_copy_fstab "${this_script}"
	274	else
[9485eba]	275	wrt_RunAsUser "${this_script}" "${file}"
[0170229]	276	fi
	277	;;
[9485eba]	278	*) wrt_RunAsUser "${this_script}" "${file}" ;;
[0170229]	279	esac
	280	#
	281	# Housekeeping...remove any build directory(ies) except if the package build fails.
[3b63c8c]	282	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	283	#
	284	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	285	wrt_touch
[0170229]	286	#
	287	#--------------------------------------------------------------------#
	288	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	289	#--------------------------------------------------------------------#
	290	#
	291	# Keep the script file name for Makefile dependencies.
	292	PREV=$this_script
	293
	294	done
	295	}
	296
	297
	298	#-----------------------------#
	299	chroot_Makefiles() { #
	300	#-----------------------------#
	301	echo "${tab_}${GREEN}Processing... ${L_arrow}chroot${R_arrow}"
	302
	303	for file in chroot/* ; do
	304	# Keep the script file name
	305	this_script=`basename $file`
	306	#
	307	# Skipping scripts is done now and not included in the build tree.
[fd5cb46]	308	case $this_script in
	309	chroot) continue ;;
	310	esac
[0170229]	311
	312	#
	313	# First append each name of the script files to a list (this will become
	314	# the names of the targets in the Makefile
	315	chroottools="$chroottools $this_script"
	316
	317	# Grab the name of the target, strip id number, XXX-script
	318	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
[3b63c8c]	319
	320	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	321
	322	#--------------------------------------------------------------------#
	323	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	324	#--------------------------------------------------------------------#
	325	#
	326	# Drop in the name of the target on a new line, and the previous target
	327	# as a dependency. Also call the echo_message function.
[3e1c0e2]	328	wrt_target "${this_script}" "$PREV"
[0170229]	329	#
[3b63c8c]	330	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	331	# Insert instructions for unpacking the package and changing directories
	332	#
[3b63c8c]	333	if [ "$pkg_tarball" != "" ] ; then
[0170229]	334	case $this_script in
[9485eba]	335	*util-linux) wrt_unpack "$pkg_tarball" ;;
[3b63c8c]	336	*) wrt_unpack2 "$pkg_tarball" ;;
[0170229]	337	esac
[c205656]	338	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	339	fi
	340	#
	341	# Select a script execution method
	342	case $this_script in
[9485eba]	343	*kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;;
	344	*util-linux) wrt_RunAsUser "${this_script}" "${file}" ;;
	345	*) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
[0170229]	346	esac
	347	#
	348	# Housekeeping...remove the build directory(ies), except if the package build fails.
[3b63c8c]	349	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	350	#
	351	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	352	wrt_touch
[0170229]	353	#
	354	#--------------------------------------------------------------------#
	355	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	356	#--------------------------------------------------------------------#
	357	#
	358	# Keep the script file name for Makefile dependencies.
	359	PREV=$this_script
	360
	361	done # for file in...
	362	}
	363
	364
	365	#-----------------------------#
	366	testsuite_tools_Makefiles() { #
	367	#-----------------------------#
[afd0232]	368	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools${R_arrow}"
[0170229]	369
	370	for file in testsuite-tools/* ; do
	371	# Keep the script file name
	372	this_script=`basename $file`
	373
	374	# First append each name of the script files to a list (this will become
	375	# the names of the targets in the Makefile
	376	testsuitetools="$testsuitetools $this_script"
	377
	378	# Grab the name of the target, strip id number, XXX-script
	379	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	380	-e 's@-64bit@@' \
	381	-e 's@-64@@' \
	382	-e 's@64@@' \
	383	-e 's@n32@@'`
	384
[3b63c8c]	385	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	386
	387	#--------------------------------------------------------------------#
	388	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	389	#--------------------------------------------------------------------#
	390	#
	391	# Drop in the name of the target on a new line, and the previous target
	392	# as a dependency. Also call the echo_message function.
[3e1c0e2]	393	wrt_target "${this_script}" "$PREV"
[0170229]	394	#
[3b63c8c]	395	wrt_unpack2 "$pkg_tarball"
[c205656]	396	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	397	#
	398	wrt_run_as_chroot1 "${this_script}" "${file}"
	399	#
	400	wrt_remove_build_dirs "${name}"
	401	#
	402	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	403	wrt_touch
[0170229]	404	#
	405	#--------------------------------------------------------------------#
	406	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	407	#--------------------------------------------------------------------#
	408	#
	409	# Keep the script file name for Makefile dependencies.
	410	PREV=$this_script
	411
	412	done
	413	}
	414
	415
	416	#--------------------------------#
	417	bm_testsuite_tools_Makefiles() { #
	418	#--------------------------------#
[afd0232]	419	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools${R_arrow}"
[0170229]	420
	421	for file in testsuite-tools/* ; do
	422	# Keep the script file name
	423	this_script=`basename $file`
	424
	425	# First append each name of the script files to a list (this will become
	426	# the names of the targets in the Makefile
[39d4d5c]	427	PREV=
[0170229]	428	testsuitetools="$testsuitetools $this_script"
	429
	430	# Grab the name of the target, strip id number, XXX-script
	431	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	432	-e 's@-64bit@@' \
	433	-e 's@-64@@' \
	434	-e 's@64@@' \
	435	-e 's@n32@@'`
	436
[3b63c8c]	437	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	438
	439	#--------------------------------------------------------------------#
	440	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	441	#--------------------------------------------------------------------#
	442	#
	443	# Drop in the name of the target on a new line, and the previous target
	444	# as a dependency. Also call the echo_message function.
[3b63c8c]	445	wrt_target_boot "${this_script}" "$PREV"
[0170229]	446	#
[3b63c8c]	447	wrt_unpack3 "$pkg_tarball"
[c205656]	448	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	449	#
	450	wrt_run_as_root2 "${this_script}" "${file}"
	451	#
	452	wrt_remove_build_dirs2 "${name}"
	453	#
	454	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	455	wrt_touch
[0170229]	456	#
	457	#--------------------------------------------------------------------#
	458	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	459	#--------------------------------------------------------------------#
	460	#
	461	# Keep the script file name for Makefile dependencies.
	462	PREV=$this_script
	463
	464	done
	465	}
	466
	467
	468	#-----------------------------#
	469	final_system_Makefiles() { #
	470	#-----------------------------#
[b12abe1]	471	# Set envars and scripts for iteration targets
	472	LOGS="" # Start with an empty global LOGS envar
	473	if [[ -z "$1" ]] ; then
	474	local N=""
	475	else
	476	local N=-build_$1
	477	local basicsystem=""
	478	mkdir final-system$N
	479	cp final-system/* final-system$N
	480	for script in final-system$N/* ; do
	481	# Overwrite existing symlinks, files, and dirs
	482	sed -e 's/ln -sv/&f/g' \
	483	-e 's/mv -v/&f/g' \
	484	-e 's/mkdir -v/&p/g' -i ${script}
	485	done
	486	# Remove Bzip2 binaries before make install
	487	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	488	# Delete *old Readline libraries just after make install
	489	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	490	fi
	491
	492	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N${R_arrow}"
[0170229]	493
[b12abe1]	494	for file in final-system$N/* ; do
[0170229]	495	# Keep the script file name
	496	this_script=`basename $file`
	497
[b12abe1]	498	# Test if the stripping phase must be skipped.
	499	# Skip alsp temp-perl for iterative runs
[fd5cb46]	500	case $this_script in
[b12abe1]	501	stripping) [[ "$STRIP" = "0" ]] && continue ;;
	502	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	503	esac
[3fcd63e]	504
[0170229]	505	# Grab the name of the target, strip id number, XXX-script
	506	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	507	-e 's@temp-@@' \
	508	-e 's@-64bit@@' \
	509	-e 's@-64@@' \
	510	-e 's@64@@' \
	511	-e 's@n32@@'`
	512
[b12abe1]	513	# Find the version of the command files, if it corresponds with the building of
	514	# a specific package. We need this here to can skip scripts not needed for
	515	# iterations rebuilds
[3b63c8c]	516	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	517
[3b63c8c]	518	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	519	case "${this_script}" in
	520	stripping) ;;
	521	*) continue ;;
	522	esac
	523	fi
	524
	525	# Append each name of the script files to a list (this will become
	526	# the names of the targets in the Makefile
	527	basicsystem="$basicsystem ${this_script}${N}"
	528
	529	# Append each name of the script files to a list (this will become
	530	# the names of the logs to be moved for each iteration)
	531	LOGS="$LOGS ${this_script}"
	532
[0170229]	533	#--------------------------------------------------------------------#
	534	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	535	#--------------------------------------------------------------------#
	536	#
	537	# Drop in the name of the target on a new line, and the previous target
	538	# as a dependency. Also call the echo_message function.
[b12abe1]	539	wrt_target "${this_script}${N}" "$PREV"
[0170229]	540
[3b63c8c]	541	# If $pkg_tarball isn't empty, we've got a package...
	542	if [ "$pkg_tarball" != "" ] ; then
	543	wrt_unpack2 "$pkg_tarball"
[e35e794]	544	# If the testsuites must be run, initialize the log file
	545	case $name in
	546	binutils \| gcc \| glibc )
	547	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
	548	;;
	549	* )
	550	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && wrt_test_log2 "${this_script}"
	551	;;
	552	esac
	553	# If using optimizations, write the instructions
[c205656]	554	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	555	fi
	556	#
	557	wrt_run_as_chroot1 "${this_script}" "${file}"
	558	#
[3b63c8c]	559	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	560	#
	561	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	562	wrt_touch
[0170229]	563	#
	564	#--------------------------------------------------------------------#
	565	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	566	#--------------------------------------------------------------------#
	567	#
	568	# Keep the script file name for Makefile dependencies.
[b12abe1]	569	PREV=${this_script}${N}
	570	# Set system_build envar for iteration targets
	571	system_build=$basicsystem
[0170229]	572	done # for file in final-system/* ...
	573	}
	574
	575
	576	#-----------------------------#
	577	bm_final_system_Makefiles() { #
	578	#-----------------------------#
[b12abe1]	579	# Set envars and scripts for iteration targets
	580	LOGS="" # Start with an empty global LOGS envar
	581	if [[ -z "$1" ]] ; then
	582	local N=""
	583	# The makesys phase was initiated in bm_testsuite_tools_makefile
	584	[[ "$TEST" = 0 ]] && PREV=""
	585	else
	586	local N=-build_$1
	587	local basicsystem=""
	588	mkdir final-system$N
	589	cp final-system/* final-system$N
	590	for script in final-system$N/* ; do
	591	# Overwrite existing symlinks, files, and dirs
	592	sed -e 's/ln -sv/&f/g' \
	593	-e 's/mv -v/&f/g' \
	594	-e 's/mkdir -v/&p/g' -i ${script}
	595	done
	596	# Remove Bzip2 binaries before make install
	597	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	598	# Delete *old Readline libraries just after make install
	599	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	600	fi
[0170229]	601
[b12abe1]	602	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N${R_arrow}"
[39d4d5c]	603
[b12abe1]	604	for file in final-system$N/* ; do
[0170229]	605	# Keep the script file name
	606	this_script=`basename $file`
	607
[3fcd63e]	608	# Test if the stripping phase must be skipped
[b12abe1]	609	# Skip alsp temp-perl for iterative runs
[64cc345]	610	case $this_script in
[b12abe1]	611	stripping) [[ "$STRIP" = "0" ]] && continue ;;
	612	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	613	esac
[0170229]	614
	615	# Grab the name of the target, strip id number, XXX-script
	616	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	617	-e 's@temp-@@' \
	618	-e 's@-64bit@@' \
	619	-e 's@-64@@' \
	620	-e 's@64@@' \
	621	-e 's@n32@@'`
	622
[b12abe1]	623	# Find the version of the command files, if it corresponds with the building of
	624	# a specific package. We need this here to can skip scripts not needed for
	625	# iterations rebuilds
[0170229]	626
[3b63c8c]	627	pkg_tarball=$(get_package_tarball_name $name)
	628
	629	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	630	case "${this_script}" in
	631	stripping) ;;
	632	*) continue ;;
	633	esac
	634	fi
	635
	636	# Append each name of the script files to a list (this will become
	637	# the names of the targets in the Makefile
	638	basicsystem="$basicsystem ${this_script}${N}"
	639
	640	# Append each name of the script files to a list (this will become
	641	# the names of the logs to be moved for each iteration)
	642	LOGS="$LOGS ${this_script}"
	643
[0170229]	644	#--------------------------------------------------------------------#
	645	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	646	#--------------------------------------------------------------------#
	647	#
	648	# Drop in the name of the target on a new line, and the previous target
	649	# as a dependency. Also call the echo_message function.
[3b63c8c]	650	wrt_target_boot "${this_script}${N}" "$PREV"
[0170229]	651
[3b63c8c]	652	# If $pkg_tarball isn't empty, we've got a package...
	653	if [ "$pkg_tarball" != "" ] ; then
	654	FILE="$pkg_tarball"
[b12abe1]	655	wrt_unpack3 "$FILE"
[e35e794]	656	# If the testsuites must be run, initialize the log file
	657	case $name in
	658	binutils \| gcc \| glibc )
	659	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
	660	;;
	661	* )
	662	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && wrt_test_log2 "${this_script}"
	663	;;
	664	esac
	665	# If using optimizations, write the instructions
[c205656]	666	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	667	fi
	668	#
	669	wrt_run_as_root2 "${this_script}" "${file}"
	670	#
[3b63c8c]	671	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[0170229]	672	#
	673	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	674	wrt_touch
[0170229]	675	#
	676	#--------------------------------------------------------------------#
	677	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	678	#--------------------------------------------------------------------#
	679	#
	680	# Keep the script file name for Makefile dependencies.
[b12abe1]	681	PREV=${this_script}${N}
	682	# Set system_build envar for iteration targets
	683	system_build=$basicsystem
[0170229]	684	done # for file in final-system/* ...
	685	}
	686
	687
	688	#-----------------------------#
	689	bootscripts_Makefiles() { #
	690	#-----------------------------#
[afd0232]	691	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts${R_arrow}"
[0170229]	692
	693	for file in bootscripts/* ; do
	694	# Keep the script file name
	695	this_script=`basename $file`
	696
	697	case $this_script in
[eba62c0]	698	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
[0170229]	699	console) continue ;; # Use the files that came with the bootscripts
	700	*) ;;
	701	esac
	702
	703	# First append each name of the script files to a list (this will become
	704	# the names of the targets in the Makefile
	705	bootscripttools="$bootscripttools $this_script"
	706
	707	# Grab the name of the target, strip id number, XXX-script
	708	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	709	-e 's@-64bit@@' \
	710	-e 's@-64@@' \
	711	-e 's@64@@' \
	712	-e 's@n32@@'`
[fd5cb46]	713	case $name in
[eba62c0]	714	bootscripts) name=bootscripts-cross-lfs ;;
	715	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	716	esac
[3b63c8c]	717
	718	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	719
	720	#--------------------------------------------------------------------#
	721	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	722	#--------------------------------------------------------------------#
	723	#
	724	# Drop in the name of the target on a new line, and the previous target
	725	# as a dependency. Also call the echo_message function.
[3e1c0e2]	726	wrt_target "${this_script}" "$PREV"
[0170229]	727	#
[3b63c8c]	728	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	729	#
[3b63c8c]	730	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
[0170229]	731	#
	732	wrt_run_as_chroot1 "${this_script}" "${file}"
	733	#
[3b63c8c]	734	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	735	#
	736	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	737	wrt_touch
[0170229]	738	#
	739	#--------------------------------------------------------------------#
	740	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	741	#--------------------------------------------------------------------#
	742	#
	743	# Keep the script file name for Makefile dependencies.
	744	PREV=$this_script
	745
	746	done # for file in bootscripts/* ...
	747
	748	}
	749
	750	#-----------------------------#
	751	bm_bootscripts_Makefiles() { #
	752	#-----------------------------#
[afd0232]	753	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts${R_arrow}"
[0170229]	754
	755	for file in bootscripts/* ; do
	756	# Keep the script file name
	757	this_script=`basename $file`
	758
	759	case $this_script in
[9485eba]	760	*udev) continue ;; # This is not a script but a commentary
[0170229]	761	console) continue ;; # Use the files that came with the bootscripts
	762	*) ;;
	763	esac
	764
	765	# First append each name of the script files to a list (this will become
	766	# the names of the targets in the Makefile
	767	bootscripttools="$bootscripttools $this_script"
	768
	769	# Grab the name of the target, strip id number, XXX-script
	770	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	771	-e 's@-64bit@@' \
	772	-e 's@-64@@' \
	773	-e 's@64@@' \
	774	-e 's@n32@@'`
[fd5cb46]	775	case $name in
[9485eba]	776	bootscripts) name=bootscripts-cross-lfs ;;
	777	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	778	esac
[3b63c8c]	779
	780	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	781
	782	#--------------------------------------------------------------------#
	783	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	784	#--------------------------------------------------------------------#
	785	#
	786	# Drop in the name of the target on a new line, and the previous target
	787	# as a dependency. Also call the echo_message function.
[3b63c8c]	788	wrt_target_boot "${this_script}" "$PREV"
[0170229]	789	#
[3b63c8c]	790	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	791	#
[3b63c8c]	792	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
[0170229]	793	#
	794	wrt_run_as_root2 "${this_script}" "${file}"
	795	#
[3b63c8c]	796	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[0170229]	797	#
	798	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	799	wrt_touch
[0170229]	800	#
	801	#--------------------------------------------------------------------#
	802	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	803	#--------------------------------------------------------------------#
	804	#
	805	# Keep the script file name for Makefile dependencies.
	806	PREV=$this_script
	807
	808	done # for file in bootscripts/* ...
	809
	810	}
	811
	812
	813
	814	#-----------------------------#
	815	bootable_Makefiles() { #
	816	#-----------------------------#
[afd0232]	817	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable${R_arrow}"
[0170229]	818
[7f38b6d]	819	for file in {bootable,the-end}/* ; do
[0170229]	820	# Keep the script file name
	821	this_script=`basename $file`
	822
	823	# A little housekeeping on the scripts
	824	case $this_script in
[7f38b6d]	825	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[87b93b4]	826	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	827	[[ -z $CONFIG ]] && continue
[0271c0c]	828	# Copy the config file to /sources with a standardized name
[1917cad]	829	cp $CONFIG $BUILDDIR/sources/kernel-config
[87b93b4]	830	;;
[0170229]	831	esac
	832	#
	833	# First append each name of the script files to a list (this will become
	834	# the names of the targets in the Makefile
	835	bootabletools="$bootabletools $this_script"
	836	#
	837	# Grab the name of the target, strip id number and misc words.
	838	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
[fd5cb46]	839	case $this_script in
	840	kernel) name=linux
	841	;;
	842	esac
[3b63c8c]	843
	844	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	845
	846	#--------------------------------------------------------------------#
	847	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	848	#--------------------------------------------------------------------#
	849	#
	850	# Drop in the name of the target on a new line, and the previous target
	851	# as a dependency. Also call the echo_message function.
[3e1c0e2]	852	wrt_target "${this_script}" "$PREV"
[0170229]	853	#
[3b63c8c]	854	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	855	# Insert instructions for unpacking the package and changing directories
	856	#
[3b63c8c]	857	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
[0170229]	858	#
	859	# Select a script execution method
	860	case $this_script in
	861	fstab) if [[ -n "$FSTAB" ]]; then
	862	wrt_copy_fstab "${this_script}"
	863	else
[fcaf131]	864	wrt_run_as_chroot1 "${this_script}" "${file}"
[0170229]	865	fi
	866	;;
[fcaf131]	867	*) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
[0170229]	868	esac
	869	#
	870	# Housekeeping...remove any build directory(ies) except if the package build fails.
[3b63c8c]	871	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[0170229]	872	#
	873	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	874	wrt_touch
[0170229]	875	#
	876	#--------------------------------------------------------------------#
	877	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	878	#--------------------------------------------------------------------#
	879	#
	880	# Keep the script file name for Makefile dependencies.
	881	PREV=$this_script
	882
	883	done
	884
[9e4b9a1]	885	# Add SBU-disk_usage report target if required
	886	if [[ "$REPORT" = "1" ]] ; then wrt_report ; fi
	887
[0170229]	888	}
	889
	890
	891
	892	#-----------------------------#
	893	bm_bootable_Makefiles() { #
	894	#-----------------------------#
[afd0232]	895	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable${R_arrow}"
[0170229]	896
[7f38b6d]	897	for file in {bootable,the-end}/* ; do
[0170229]	898	# Keep the script file name
	899	this_script=`basename $file`
	900
	901	# A little housekeeping on the scripts
	902	case $this_script in
[7f38b6d]	903	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[b83baf6]	904	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	905	[[ -z $CONFIG ]] && continue
[0271c0c]	906	# Copy the named config file to /sources with a standardized name
[62033d2]	907	cp $CONFIG $BUILDDIR/sources/kernel-config
[0170229]	908	;;
	909	esac
	910	#
	911	# First append each name of the script files to a list (this will become
	912	# the names of the targets in the Makefile
	913	bootabletools="$bootabletools $this_script"
	914	#
	915	# Grab the name of the target, strip id number and misc words.
	916	case $this_script in
[3b63c8c]	917	*kernel) name=linux ;;
[0170229]	918	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	919	esac
	920
[3b63c8c]	921	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	922
	923	#--------------------------------------------------------------------#
	924	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	925	#--------------------------------------------------------------------#
	926	#
	927	# Drop in the name of the target on a new line, and the previous target
	928	# as a dependency. Also call the echo_message function.
[3b63c8c]	929	wrt_target_boot "${this_script}" "$PREV"
[0170229]	930	#
[3b63c8c]	931	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	932	# Insert instructions for unpacking the package and changing directories
	933	#
[3b63c8c]	934	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
[0170229]	935	#
	936	# Select a script execution method
	937	case $this_script in
	938	fstab) if [[ -n "$FSTAB" ]]; then
[a9490ab]	939	# Minimal boot mode has no access to original file, store in /sources
	940	cp $FSTAB $BUILDDIR/sources/fstab
[0170229]	941	wrt_copy_fstab2 "${this_script}"
	942	else
	943	wrt_run_as_root2 "${this_script}" "${file}"
	944	fi
	945	;;
	946	*) wrt_run_as_root2 "${this_script}" "${file}" ;;
	947	esac
	948	#
	949	# Housekeeping...remove any build directory(ies) except if the package build fails.
[3b63c8c]	950	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[0170229]	951	#
	952	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	953	wrt_touch
[0170229]	954	#
	955	#--------------------------------------------------------------------#
	956	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	957	#--------------------------------------------------------------------#
	958	#
	959	# Keep the script file name for Makefile dependencies.
	960	PREV=$this_script
	961
	962	done
	963
[9e4b9a1]	964	# Add SBU-disk_usage report target if required
	965	if [[ "$REPORT" = "1" ]] ; then wrt_report ; fi
	966
[0170229]	967	}
	968
	969
	970	#-----------------------------#
	971	build_Makefile() { # Construct a Makefile from the book scripts
	972	#-----------------------------#
	973	echo "Creating Makefile... ${BOLD}START${OFF}"
	974
	975	cd $JHALFSDIR/${PROGNAME}-commands
	976	# Start with a clean Makefile.tmp file
	977	>$MKFILE.tmp
	978
	979	host_prep_Makefiles
[d43a271]	980	cross_tools_Makefiles # $cross_tools
	981	temptools_Makefiles # $temptools
[afd0232]	982	if [[ $METHOD = "chroot" ]]; then
[d43a271]	983	chroot_Makefiles # $chroottools
[fa06e8e]	984	if [[ ! $TEST = "0" ]]; then
[d43a271]	985	testsuite_tools_Makefiles # $testsuitetools
[0170229]	986	fi
[d43a271]	987	final_system_Makefiles # $basicsystem
[b12abe1]	988	# Add the iterations targets, if needed
	989	[[ "$COMPARE" != "0" ]] && wrt_compare_targets
[d43a271]	990	bootscripts_Makefiles # $bootscripttools
	991	bootable_Makefiles # $bootabletools
[0170229]	992	else
[d43a271]	993	boot_Makefiles # $boottools
[fa06e8e]	994	if [[ ! $TEST = "0" ]]; then
[d43a271]	995	bm_testsuite_tools_Makefiles # $testsuitetools
[0170229]	996	fi
[d43a271]	997	bm_final_system_Makefiles # $basicsystem
[b12abe1]	998	# Add the iterations targets, if needed
	999	[[ "$COMPARE" != "0" ]] && wrt_compare_targets
[d43a271]	1000	bm_bootscripts_Makefiles # $bootscipttools
	1001	bm_bootable_Makefiles # $bootabletoosl
[0170229]	1002	fi
[39d4d5c]	1003	# the_end_Makefiles
[0170229]	1004
	1005
	1006	# Add a header, some variables and include the function file
	1007	# to the top of the real Makefile.
	1008	(
	1009	cat << EOF
	1010	$HEADER
	1011
	1012	SRC= /sources
	1013	MOUNT_PT= $BUILDDIR
[460ea63]	1014	PKG_LST= $PKG_LST
[9485eba]	1015	LUSER= $LUSER
	1016	LGROUP= $LGROUP
[0170229]	1017
	1018	include makefile-functions
	1019
	1020	EOF
	1021	) > $MKFILE
	1022
	1023	# Add chroot commands
[e676ffa]	1024	if [ "$METHOD" = "chroot" ] ; then
[8381f6e]	1025	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	1026	chroot=`cat chroot/chroot \| \
	1027	sed -e "s@chroot@$CHROOT_LOC@" \
	1028	-e '/#!\/tools\/bin\/bash/d' \
	1029	-e '/^export/d' \
	1030	-e '/^logout/d' \
	1031	-e 's@ \\\@ @g' \| \
	1032	tr -d '\n' \| \
	1033	sed -e 's/ */ /g' \
	1034	-e 's\|\\$\|&&\|g' \
	1035	-e 's\|exit\|\|g' \
	1036	-e 's\|$\| -c\|' \
	1037	-e 's\|"$$CLFS"\|$(MOUNT_PT)\|'\
	1038	-e 's\|set -e\|\|'`
[e676ffa]	1039	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1040	fi
[0170229]	1041
	1042	# Drop in the main target 'all:' and the chapter targets with each sub-target
	1043	# as a dependency.
[39d4d5c]	1044	if [[ "${METHOD}" = "chroot" ]]; then
[0170229]	1045	(
	1046	cat << EOF
[3a27393]	1047	all: chapter2 chapter3 chapter4 chapter5 chapter6 chapter7 chapter8 do-housekeeping
[0170229]	1048	@\$(call echo_finished,$VERSION)
	1049
	1050	chapter2: 023-creatingtoolsdir 024-creatingcrossdir 025-addinguser 026-settingenvironment
	1051
	1052	chapter3: chapter2 $cross_tools
	1053
	1054	chapter4: chapter3 $temptools
	1055
[30737ea8]	1056	chapter5: chapter4 $chroottools restore-luser-env $testsuitetools
[0170229]	1057
	1058	chapter6: chapter5 $basicsystem
	1059
	1060	chapter7: chapter6 $bootscripttools
	1061
	1062	chapter8: chapter7 $bootabletools
	1063
	1064	clean-all: clean
[db187c74]	1065	rm -rf ./{clfs-commands,logs,Makefile,*.xsl,makefile-functions,packages,patches}
[0170229]	1066
	1067	clean: clean-chapter4 clean-chapter3 clean-chapter2
	1068
[3b63c8c]	1069	restart:
	1070	@echo "This feature does not exist for the CLFS makefile. (yet)"
	1071
[0170229]	1072	clean-chapter2:
[30737ea8]	1073	-if [ ! -f luser-exist ]; then \\
[9485eba]	1074	userdel \$(LUSER); \\
	1075	rm -rf /home/\$(LUSER); \\
[0170229]	1076	fi;
	1077	rm -rf \$(MOUNT_PT)/tools
	1078	rm -f /tools
	1079	rm -rf \$(MOUNT_PT)/cross-tools
	1080	rm -f /cross-tools
[30737ea8]	1081	rm -f envars luser-exist
[0170229]	1082	rm -f 02* logs/02*.log
	1083
	1084	clean-chapter3:
	1085	rm -rf \$(MOUNT_PT)/tools/*
[30737ea8]	1086	rm -f $cross_tools sources-dir
[0170229]	1087	cd logs && rm -f $cross_tools && cd ..
	1088
	1089	clean-chapter4:
	1090	-umount \$(MOUNT_PT)/sys
	1091	-umount \$(MOUNT_PT)/proc
	1092	-umount \$(MOUNT_PT)/dev/shm
	1093	-umount \$(MOUNT_PT)/dev/pts
	1094	-umount \$(MOUNT_PT)/dev
	1095	rm -rf \$(MOUNT_PT)/{bin,boot,dev,etc,home,lib,lib64,media,mnt,opt,proc,root,sbin,srv,sys,tmp,usr,var}
	1096	rm -f $temptools
	1097	cd logs && rm -f $temptools && cd ..
	1098
	1099
[30737ea8]	1100	restore-luser-env:
[0170229]	1101	@\$(call echo_message, Building)
[9485eba]	1102	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1103	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[0170229]	1104	fi;
[9485eba]	1105	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1106	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[0170229]	1107	fi;
[9485eba]	1108	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[9199a13]	1109	touch \$@ && \\
	1110	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1111	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	1112
[3a27393]	1113	do-housekeeping:
[9199a13]	1114	@-umount \$(MOUNT_PT)/dev/pts
	1115	@-umount \$(MOUNT_PT)/dev/shm
	1116	@-umount \$(MOUNT_PT)/dev
	1117	@-umount \$(MOUNT_PT)/sys
	1118	@-umount \$(MOUNT_PT)/proc
[30737ea8]	1119	@-if [ ! -f luser-exist ]; then \\
[9485eba]	1120	userdel \$(LUSER); \\
	1121	rm -rf /home/\$(LUSER); \\
[3a27393]	1122	fi;
	1123
[0170229]	1124	EOF
	1125	) >> $MKFILE
[39d4d5c]	1126	fi
	1127
	1128
	1129	if [[ "${METHOD}" = "boot" ]]; then
	1130	(
	1131	cat << EOF
[64cc345]	1132
[3e1c0e2]	1133	all: makeboot
[39d4d5c]	1134
	1135	makeboot: 023-creatingtoolsdir 024-creatingcrossdir 025-addinguser 026-settingenvironment \
	1136	$cross_tools\
	1137	$temptools \
	1138	$chroottools \
[30737ea8]	1139	$boottools restore-luser-env
[39d4d5c]	1140	@\$(call echo_boot_finished,$VERSION)
	1141
[d43a271]	1142	makesys: $testsuitetools $basicsystem $bootscripttools $bootabletools
[39d4d5c]	1143	@\$(call echo_finished,$VERSION)
	1144
	1145
	1146	clean-all: clean
[db187c74]	1147	rm -rf ./{clfs-commands,logs,Makefile,*.xsl,makefile-functions,packages,patches}
[39d4d5c]	1148
	1149	clean: clean-makesys clean-makeboot clean-jhalfs
	1150
[3b63c8c]	1151	restart:
	1152	@echo "This feature does not exist for the CLFS makefile. (yet)"
	1153
[39d4d5c]	1154	clean-jhalfs:
[30737ea8]	1155	-if [ ! -f luser-exist ]; then \\
[9485eba]	1156	userdel \$(LUSER); \\
	1157	rm -rf /home/\$(LUSER); \\
[39d4d5c]	1158	fi;
	1159	rm -rf \$(MOUNT_PT)/tools
	1160	rm -f /tools
	1161	rm -rf \$(MOUNT_PT)/cross-tools
	1162	rm -f /cross-tools
[30737ea8]	1163	rm -f envars luser-exist
[39d4d5c]	1164	rm -f 02* logs/02*.log
[0170229]	1165
[39d4d5c]	1166	clean-makeboot:
	1167	rm -rf /tools/*
[64cc345]	1168	rm -f $cross_tools && rm -f $temptools && rm -f $chroottools && rm -f $boottools
[30737ea8]	1169	rm -f restore-luser-env sources-dir
[39d4d5c]	1170	cd logs && rm -f $cross_tools && rm -f $temptools && rm -f $chroottools && rm -f $boottools && cd ..
	1171
	1172	clean-makesys:
	1173	-umount \$(MOUNT_PT)/sys
	1174	-umount \$(MOUNT_PT)/proc
	1175	-umount \$(MOUNT_PT)/dev/shm
	1176	-umount \$(MOUNT_PT)/dev/pts
	1177	-umount \$(MOUNT_PT)/dev
	1178	rm -rf \$(MOUNT_PT)/{bin,boot,dev,etc,home,lib,lib64,media,mnt,opt,proc,root,sbin,srv,sys,tmp,usr,var}
	1179	rm -f $basicsystem
	1180	rm -f $bootscripttools
	1181	rm -f $bootabletools
	1182	cd logs && rm -f $basicsystem && rm -f $bootscripttools && rm -f $bootabletools && cd ..
	1183
	1184
[30737ea8]	1185	restore-luser-env:
[39d4d5c]	1186	@\$(call echo_message, Building)
[9485eba]	1187	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1188	mv -fv /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[39d4d5c]	1189	fi;
[9485eba]	1190	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1191	mv -v /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[39d4d5c]	1192	fi;
[9485eba]	1193	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[9199a13]	1194	touch \$@ && \\
	1195	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1196	echo --------------------------------------------------------------------------------\$(WHITE)
[39d4d5c]	1197
[3a27393]	1198
[39d4d5c]	1199	EOF
	1200	) >> $MKFILE
	1201	fi
[0170229]	1202
	1203	# Bring over the items from the Makefile.tmp
	1204	cat $MKFILE.tmp >> $MKFILE
	1205	rm $MKFILE.tmp
	1206	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	1207
	1208	}
	1209

Note: See TracBrowser for help on using the repository browser.

Download in other formats: