Context Navigation

source: CLFS/master.sh@ 0f3b1c3

ablfs-more legacy trunk

Last change on this file since 0f3b1c3 was fd4a798, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago
Remove $Id$ comments, they are useless with git
Property mode set to `100644`
File size: 43.7 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[045b2dc]	2
	3	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	4
	5
	6	#--------------------------------------#
	7	host_prep_Makefiles() { #
	8	#--------------------------------------#
[e2ec07a]	9	local CLFS_HOST
[877cc6a]	10
[045b2dc]	11	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	12
	13	# defined here, only for ease of reading
[ff4d1ab]	14	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	15	(
	16	cat << EOF
	17	023-creatingtoolsdir:
	18	@\$(call echo_message, Building)
[269d81c]	19	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	20	rm -f /tools && \\
[dbcdfd7]	21	ln -s \$(MOUNT_PT)/tools /
	22	@\$(call housekeeping)
[877cc6a]	23
	24	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	25	@\$(call echo_message, Building)
[269d81c]	26	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	27	rm -f /cross-tools && \\
[dbcdfd7]	28	ln -s \$(MOUNT_PT)/cross-tools /
	29	@\$(call housekeeping)
[877cc6a]	30
	31	025-addinguser: 024-creatingcrossdir
	32	@\$(call echo_message, Building)
[962793a]	33	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	34	groupadd \$(LGROUP); \\
	35	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	36	mkdir -pv \$(LUSER_HOME); \\
	37	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	38	else \\
[269d81c]	39	touch luser-exist; \\
	40	fi
	41	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	42	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	43	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	44	chmod a+wt \$(SRCSDIR)
	45	@\$(call housekeeping)
[877cc6a]	46
	47	026-settingenvironment: 025-addinguser
	48	@\$(call echo_message, Building)
[962793a]	49	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	50	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	51	fi
[962793a]	52	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	53	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	54	fi;
[962793a]	55	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	56	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	57	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	58	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
[5f154f1]	64	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
[962793a]	65	echo "" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	66	EOF
	67	) >> $MKFILE.tmp
	68	if ! [ -e final-preps/*variables ]; then
	69	(
	70	cat << EOF
[962793a]	71	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	72	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	73	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	74	EOF
	75	) >> $MKFILE.tmp
	76	fi
	77	(
	78	cat << EOF
[962793a]	79	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	80	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	81	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	82	if [ -d \$(MOUNT_PT)/var ]; then \\
	83	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	84	fi && \\
[877cc6a]	85	touch envars && \\
[e18f80a]	86	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	87	@\$(call housekeeping)
[877cc6a]	88	EOF
	89	) >> $MKFILE.tmp
[045b2dc]	90	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	91
	92	}
	93
[3f83cb0]	94	#--------------------------------------#
	95	final_preps_Makefiles() {
	96	#--------------------------------------#
	97	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
	98	for file in final-preps/* ; do
	99	this_script=`basename $file`
	100	case $this_script in
	101	*variables )
	102	;;
	103	*) continue; ;;
	104	esac
	105	# Set the dependency for the first target.
	106	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	107
	108	# First append each name of the script files to a list (this will become
	109	# the names of the targets in the Makefile
	110	final_preps="$final_preps $this_script"
	111
	112	# No need to grab the package name
	113
	114	LUSER_wrt_target "${this_script}" "$PREV"
	115	LUSER_wrt_RunAsUser "${file}"
	116	wrt_touch
	117	PREV=$this_script
	118	done # for file in ....
	119	}
	120
[045b2dc]	121	#--------------------------------------#
	122	cross_tools_Makefiles() { #
	123	#--------------------------------------#
	124	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	125
	126	for file in cross-tools/* ; do
	127	# Keep the script file name
	128	this_script=`basename $file`
	129	#
	130	# Skip this script...
	131	case $this_script in
	132	cflags \| variables ) # work done in host_prep_Makefiles
	133	continue; ;;
	134	*) ;;
	135	esac
	136	#
	137	# Set the dependency for the first target.
	138	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	139
	140	# First append each name of the script files to a list (this will become
	141	# the names of the targets in the Makefile
	142	cross_tools="$cross_tools $this_script"
	143
	144	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	145	# and binutils in chapter 5)
	146	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	147	-e 's@-static@@' \
	148	-e 's@-final@@' \
[480295c]	149	-e 's@-64@@' \
[82808d1]	150	-e 's@-n32@@' \
	151	-e 's@-pass1@@'`
[a160d86]	152	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	153
	154	#--------------------------------------------------------------------#
	155	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	156	#--------------------------------------------------------------------#
	157	#
	158	# Drop in the name of the target on a new line, and the previous target
	159	# as a dependency. Also call the echo_message function.
[045b2dc]	160	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	161	#
[a160d86]	162	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	163	#
[045b2dc]	164	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	165	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	166	#
[045b2dc]	167	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	168	#
[045b2dc]	169	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	170	#
	171	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	172	wrt_touch
[877cc6a]	173	#
	174	#--------------------------------------------------------------------#
	175	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	176	#--------------------------------------------------------------------#
	177	#
	178	# Keep the script file name for Makefile dependencies.
	179	PREV=$this_script
	180
	181	done # for file in ....
	182	}
	183
[045b2dc]	184	#--------------------------------------#
	185	temptools_Makefiles() { #
	186	#--------------------------------------#
	187	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	188
	189	for file in temp-system/* ; do
	190	# Keep the script file name
	191	this_script=`basename $file`
[6f2cd96]	192	#
	193	# Deal with any odd scripts..
	194	case $this_script in
	195	*choose) # The choose script will fail if you cannot enter the new environment
	196	# If the 'boot' build method was chosen don't run the script
	197	[[ $METHOD = "boot" ]] && continue; ;;
	198	*) ;;
	199	esac
[e2ec07a]	200
[877cc6a]	201	#
	202	# First append each name of the script files to a list (this will become
	203	# the names of the targets in the Makefile
	204	temptools="$temptools $this_script"
	205
	206	#
	207	# Grab the name of the target, strip id number, XXX-script
	208	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	209	#
[a160d86]	210	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	211
	212	#--------------------------------------------------------------------#
	213	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	214	#--------------------------------------------------------------------#
	215	#
	216	# Drop in the name of the target on a new line, and the previous target
	217	# as a dependency. Also call the echo_message function.
[045b2dc]	218	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	219	#
[a160d86]	220	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	221	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	222	#
[045b2dc]	223	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	224	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	225	#
[045b2dc]	226	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	227	#
[045b2dc]	228	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	229	#
	230	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	231	wrt_touch
[877cc6a]	232	#
	233	#--------------------------------------------------------------------#
	234	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	235	#--------------------------------------------------------------------#
	236	#
	237	# Keep the script file name for Makefile dependencies.
	238	PREV=$this_script
	239	done # for file in ....
	240	}
	241
	242
[045b2dc]	243	#--------------------------------------#
	244	chroot_Makefiles() { #
	245	#--------------------------------------#
	246	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	247
[045b2dc]	248	for file in chroot/* ; do
[877cc6a]	249	# Keep the script file name
	250	this_script=`basename $file`
[045b2dc]	251	#
	252	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	253	case $this_script in
[045b2dc]	254	chroot) continue ;;
[877cc6a]	255	esac
[045b2dc]	256
[877cc6a]	257	#
	258	# First append each name of the script files to a list (this will become
	259	# the names of the targets in the Makefile
[045b2dc]	260	case "${this_script}" in
	261	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	262	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	263	esac
[045b2dc]	264
	265	# Grab the name of the target, strip id number, XXX-script
	266	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	267
[a160d86]	268	pkg_tarball=$(get_package_tarball_name $name)
	269
[045b2dc]	270	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	271	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	272	# .. Customized makefile entry
	273	case "${this_script}" in
	274	*util-linux)
	275	LUSER_wrt_target "${this_script}" "$PREV"
	276	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	277	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	278	LUSER_wrt_RunAsUser "${file}"
	279	LUSER_RemoveBuildDirs "${name}"
	280	wrt_touch
[480295c]	281	temptools="$temptools $this_script"
	282	continue ;;
[608fbe1]	283	*util-linux-ng)
	284	LUSER_wrt_target "${this_script}" "$PREV"
	285	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	286	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	287	LUSER_wrt_RunAsUser "${file}"
	288	LUSER_RemoveBuildDirs "${name}"
	289	wrt_touch
	290	temptools="$temptools $this_script"
	291	continue ;;
	292	*util-linux-libs)
	293	LUSER_wrt_target "${this_script}" "$PREV"
	294	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	295	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	296	LUSER_wrt_RunAsUser "${file}"
	297	LUSER_RemoveBuildDirs "${name}"
	298	wrt_touch
	299	temptools="$temptools $this_script"
	300	continue ;;
	301	*e2fsprogs)
	302	LUSER_wrt_target "${this_script}" "$PREV"
	303	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	304	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	305	LUSER_wrt_RunAsUser "${file}"
	306	LUSER_RemoveBuildDirs "${name}"
	307	wrt_touch
	308	temptools="$temptools $this_script"
	309	continue ;;
	310	*e2fsprogs-libs)
	311	LUSER_wrt_target "${this_script}" "$PREV"
	312	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	313	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	314	LUSER_wrt_RunAsUser "${file}"
	315	LUSER_RemoveBuildDirs "${name}"
	316	wrt_touch
	317	temptools="$temptools $this_script"
	318	continue ;;
[045b2dc]	319	esac
	320
	321
[877cc6a]	322	#--------------------------------------------------------------------#
	323	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	324	#--------------------------------------------------------------------#
	325	#
	326	# Drop in the name of the target on a new line, and the previous target
	327	# as a dependency. Also call the echo_message function.
[045b2dc]	328	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	329	#
[a160d86]	330	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	331	# Insert instructions for unpacking the package and changing directories
	332	#
[045b2dc]	333	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	334	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	335	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	336	fi
[877cc6a]	337	#
	338	# Select a script execution method
	339	case $this_script in
[8f2c086]	340	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	341	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	342	esac
	343	#
[045b2dc]	344	# Housekeeping...remove the build directory(ies), except if the package build fails.
	345	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	346	#
	347	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	348	wrt_touch
[877cc6a]	349	#
	350	#--------------------------------------------------------------------#
	351	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	352	#--------------------------------------------------------------------#
	353	#
	354	# Keep the script file name for Makefile dependencies.
	355	PREV=$this_script
	356
[045b2dc]	357	done # for file in...
[877cc6a]	358	}
	359
	360
[045b2dc]	361	#--------------------------------------#
	362	boot_Makefiles() { #
	363	#--------------------------------------#
[877cc6a]	364
[045b2dc]	365	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	366	#
	367	# Create a target bootable partition containing a compile environment. Later
	368	# on we boot into this environment and contine the build.
	369	#
	370	for file in boot/* ; do
[877cc6a]	371	# Keep the script file name
	372	this_script=`basename $file`
[045b2dc]	373
	374	# A little housekeeping on the scripts
[877cc6a]	375	case $this_script in
[f940c29]	376	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	377	how-to-view) continue ;;
[045b2dc]	378	whatnext) continue ;;
[d601cfc]	379	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	380	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	381	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[045b2dc]	382	*kernel) # if there is no kernel config file do not build the kernel
[85506da]	383	[[ -z $BOOT_CONFIG ]] && continue
[045b2dc]	384	# Copy the config file to /sources with a standardized name
[85506da]	385	[[ ${BOOT_CONFIG} == $BUILDDIR/sources/bootkernel-config ]] \|\|
[045b2dc]	386	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	387	;;
[877cc6a]	388	esac
	389	#
	390	# First append each name of the script files to a list (this will become
[179ae85]	391	# the names of the targets in the Makefile). Those names differ depending
	392	# on the version of the book. What makes the difference between those
	393	# versions is the presence of "how-to-view" in the boot chapter.
	394	if [ -f boot/*how-to-view ]; then
	395	case "${this_script}" in
	396	*changingowner)
	397	orphan_scripts="${orphan_scripts} ${this_script}"
	398	;;
	399	*creatingdirs)
	400	orphan_scripts="${orphan_scripts} ${this_script}"
	401	;;
	402	*createfiles)
	403	orphan_scripts="${orphan_scripts} ${this_script}"
	404	;;
	405	*devices)
	406	orphan_scripts="${orphan_scripts} ${this_script}"
	407	;;
	408	*flags)
	409	orphan_scripts="${orphan_scripts} ${this_script}"
	410	;;
	411	*fstab)
	412	orphan_scripts="${orphan_scripts} ${this_script}"
	413	;;
	414	*pwdgroup)
	415	orphan_scripts="${orphan_scripts} ${this_script}"
	416	;;
	417	*settingenvironment)
	418	orphan_scripts="${orphan_scripts} ${this_script}"
	419	;;
	420	*)
	421	boottools="$boottools $this_script"
	422	;;
	423	esac
	424	else
	425	case "${this_script}" in
	426	*changingowner)
	427	orphan_scripts="${orphan_scripts} ${this_script}"
	428	;;
	429	*devices)
	430	orphan_scripts="${orphan_scripts} ${this_script}"
	431	;;
	432	*)
	433	boottools="$boottools $this_script"
	434	;;
	435	esac
	436	fi
[045b2dc]	437	#
	438	# Grab the name of the target, strip id number and misc words.
	439	case $this_script in
[179ae85]	440	*kernel) name=linux ;;
	441	*bootscripts) name="bootscripts-cross-lfs" ;;
	442	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	443	*udev-rules) name="udev-cross-lfs" ;;
	444	*grub-build) name=grub ;;
	445	*-aboot-build) name=aboot ;;
	446	*yaboot-build) name=yaboot ;;
	447	*colo-build) name=colo ;;
	448	*silo-build) name=silo ;;
	449	*arcload-build) name=arcload ;;
	450	*lilo-build) name=lilo ;;
[045b2dc]	451	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	452	esac
	453	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	454	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	455
	456	#--------------------------------------------------------------------#
	457	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	458	#--------------------------------------------------------------------#
	459	#
	460	# Drop in the name of the target on a new line, and the previous target
	461	# as a dependency. Also call the echo_message function.
[045b2dc]	462	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	463	#
[a160d86]	464	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	465	# Insert instructions for unpacking the package and changing directories
	466	#
[045b2dc]	467	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	468	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	469	#
	470	# Select a script execution method
[179ae85]	471	if [ -f boot/*how-to-view ]; then
	472	case $this_script in
	473	# The following 8 scripts are defined in the /boot directory but need
	474	# to be run as a root user. Set them up here but run them in another
	475	# phase
	476	*changingowner) wrt_RunAsRoot "${file}" ;;
	477	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	478	*createfiles) wrt_RunAsRoot "${file}" ;;
	479	*devices) wrt_RunAsRoot "${file}" ;;
	480	*flags) wrt_RunAsRoot "${file}" ;;
	481	*fstab)
	482	if [[ -n "$FSTAB" ]]; then
	483	LUSER_wrt_CopyFstab
	484	else
	485	wrt_RunAsRoot "${file}"
	486	fi
	487	;;
	488	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	489	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	490	*) LUSER_wrt_RunAsUser "${file}" ;;
	491	esac
	492	else
	493	case $this_script in
	494	# The following 2 scripts are defined in the /boot directory but need
	495	# to be run as a root user. Set them up here but run them in another
	496	# phase
	497	*changingowner) wrt_RunAsRoot "${file}" ;;
	498	*devices) wrt_RunAsRoot "${file}" ;;
	499	*fstab)
[d601cfc]	500	if [[ -n "${FSTAB}" ]]; then
[179ae85]	501	LUSER_wrt_CopyFstab
	502	else
	503	LUSER_wrt_RunAsUser "${file}"
	504	fi
	505	;;
	506	*) LUSER_wrt_RunAsUser "${file}" ;;
	507	esac
	508	fi
[877cc6a]	509	#
[045b2dc]	510	# Housekeeping...remove any build directory(ies) except if the package build fails.
	511	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	512	#
	513	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	514	wrt_touch
[877cc6a]	515	#
	516	#--------------------------------------------------------------------#
	517	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	518	#--------------------------------------------------------------------#
	519	#
	520	# Keep the script file name for Makefile dependencies.
	521	PREV=$this_script
	522
[045b2dc]	523	done
[877cc6a]	524	}
	525
	526
[045b2dc]	527	#--------------------------------------#
[d55a1a1]	528	testsuite_tools_Makefiles() { #
[045b2dc]	529	#--------------------------------------#
[877cc6a]	530
[d55a1a1]	531	if [[ "${METHOD}" = "chroot" ]]; then
	532	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	533	else
	534	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	535	PREV=""
[d55a1a1]	536	fi
[877cc6a]	537
	538	for file in testsuite-tools/* ; do
	539	# Keep the script file name
	540	this_script=`basename $file`
	541
	542	# First append each name of the script files to a list (this will become
	543	# the names of the targets in the Makefile
	544	testsuitetools="$testsuitetools $this_script"
	545
	546	# Grab the name of the target, strip id number, XXX-script
	547	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	548	-e 's@-64bit@@' \
	549	-e 's@-64@@' \
	550	-e 's@64@@' \
	551	-e 's@n32@@'`
	552
[a160d86]	553	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	554
	555	#--------------------------------------------------------------------#
	556	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	557	#--------------------------------------------------------------------#
	558	#
	559	# Drop in the name of the target on a new line, and the previous target
	560	# as a dependency. Also call the echo_message function.
[ca6b261]	561	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	562	#
[ca6b261]	563	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	564	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	565	#
[ca6b261]	566	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	567	#
[ca6b261]	568	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	569	#
	570	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	571	wrt_touch
[877cc6a]	572	#
	573	#--------------------------------------------------------------------#
	574	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	575	#--------------------------------------------------------------------#
	576	#
	577	# Keep the script file name for Makefile dependencies.
	578	PREV=$this_script
	579
	580	done
	581	}
	582
	583
[045b2dc]	584	#--------------------------------------#
[d55a1a1]	585	final_system_Makefiles() { #
[045b2dc]	586	#--------------------------------------#
[45f82718]	587	# Set envars and scripts for iteration targets
	588	if [[ -z "$1" ]] ; then
	589	local N=""
[d55a1a1]	590	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	591	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	592	else
	593	local N=-build_$1
	594	local basicsystem=""
	595	mkdir final-system$N
	596	cp final-system/* final-system$N
	597	for script in final-system$N/* ; do
	598	# Overwrite existing symlinks, files, and dirs
	599	sed -e 's/ln -sv/&f/g' \
	600	-e 's/mv -v/&f/g' \
	601	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	602	# Rename the scripts
	603	mv ${script} ${script}$N
[45f82718]	604	done
[a5f52ba]	605	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	606	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	607	# Delete *old Readline libraries just after make install
[10c8b78]	608	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	609	fi
	610
[d55a1a1]	611	if [[ "${METHOD}" = "chroot" ]]; then
	612	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	613	else
	614	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	615	fi
[877cc6a]	616
[45f82718]	617	for file in final-system$N/* ; do
[877cc6a]	618	# Keep the script file name
	619	this_script=`basename $file`
	620
[45f82718]	621	# Test if the stripping phase must be skipped.
[4384929]	622	# Skip also temp-perl for iterative runs
[877cc6a]	623	case $this_script in
[401f81e]	624	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	625	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	626	esac
	627
[4384929]	628	# Grab the name of the target, strip id number, XXX-script.
	629	# name1 is partially stripped and should be used for logging files.
	630	# name is completely stripped and is used for grabbing
	631	# the package name.
	632	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	633	-e 's,'$N',,'`
	634	name=`echo $name1 \| sed -e 's@temp-@@' \
	635	-e 's@-64bit@@' \
	636	-e 's@-64@@' \
	637	-e 's@64@@' \
	638	-e 's@n32@@'`
[877cc6a]	639
[45f82718]	640	# Find the version of the command files, if it corresponds with the building of
	641	# a specific package. We need this here to can skip scripts not needed for
	642	# iterations rebuilds
[a160d86]	643	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	644
[a160d86]	645	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	646	case "${this_script}" in
	647	stripping) ;;
	648	*) continue ;;
	649	esac
	650	fi
	651
	652	# Append each name of the script files to a list (this will become
	653	# the names of the targets in the Makefile
[10c8b78]	654	basicsystem="$basicsystem ${this_script}"
[45f82718]	655
[877cc6a]	656	#--------------------------------------------------------------------#
	657	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	658	#--------------------------------------------------------------------#
	659	#
	660	# Drop in the name of the target on a new line, and the previous target
	661	# as a dependency. Also call the echo_message function.
[10c8b78]	662	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	663
[a160d86]	664	# If $pkg_tarball isn't empty, we've got a package...
	665	if [ "$pkg_tarball" != "" ] ; then
[f546320]	666	# Touch timestamp file if installed files logs will be created.
	667	# But only for the firt build when running iterative builds.
	668	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	669	CHROOT_wrt_TouchTimestamp
	670	fi
[045b2dc]	671	CHROOT_Unpack "$pkg_tarball"
[a229600]	672	# If the testsuites must be run, initialize the log file
	673	case $name in
[269d81c]	674	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	675	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	676	;;
	677	* )
[10c8b78]	678	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	679	;;
	680	esac
	681	# If using optimizations, write the instructions
[1b65a84]	682	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	683	fi
	684	#
[045b2dc]	685	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	686	#
[f546320]	687	# Write installed files log and remove the build directory(ies)
	688	# except if the package build fails.
	689	if [ "$pkg_tarball" != "" ] ; then
	690	CHROOT_wrt_RemoveBuildDirs "$name"
	691	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	692	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	693	fi
	694	fi
[877cc6a]	695	#
[f546320]	696	# Include a touch of the target name so make can check
	697	# if it's already been made.
[93f38e7]	698	wrt_touch
[877cc6a]	699	#
	700	#--------------------------------------------------------------------#
	701	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	702	#--------------------------------------------------------------------#
	703	#
	704	# Keep the script file name for Makefile dependencies.
[10c8b78]	705	PREV=${this_script}
[45f82718]	706	# Set system_build envar for iteration targets
	707	system_build=$basicsystem
[877cc6a]	708	done # for file in final-system/* ...
	709	}
	710
[045b2dc]	711	#--------------------------------------#
[d55a1a1]	712	bootscripts_Makefiles() { #
[045b2dc]	713	#--------------------------------------#
[d55a1a1]	714
[c6ee8ea]	715	# New versions of the book do not have bootscripts anymore
	716	# (use systemd configuration files)
	717	# Define a variable to be used for the right script directory to parse
	718	if [ -d bootscripts ]; then
	719	config="bootscripts"
	720	else
	721	config="system-config"
	722	fi
	723
[d55a1a1]	724	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	725	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	726	else
[c6ee8ea]	727	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	728	fi
[877cc6a]	729
[c6ee8ea]	730	for file in $config/* ; do
[877cc6a]	731	# Keep the script file name
	732	this_script=`basename $file`
	733
	734	case $this_script in
[d601cfc]	735	*udev) continue ;; # This is not a script but a comment, we want udev-rules
[877cc6a]	736	console) continue ;; # Use the files that came with the bootscripts
[f0de954]	737	# fstab is now here (for 3.x.y)
[d601cfc]	738	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	739	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	740	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	741	*) ;;
	742	esac
	743
	744	# First append each name of the script files to a list (this will become
	745	# the names of the targets in the Makefile
	746	bootscripttools="$bootscripttools $this_script"
	747
[4384929]	748	# Grab the name of the target, strip id number, XXX-script.
	749	# name1 is partially stripped and should be used for logging files.
	750	# name is completely stripped and is used for grabbing
	751	# the package name.
	752	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	753	name=`echo $name1 \| sed -e 's@-64bit@@' \
	754	-e 's@-64@@' \
	755	-e 's@64@@' \
	756	-e 's@n32@@'`
[877cc6a]	757	case $name in
[c044e3c]	758	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	759	*udev-rules) name=udev-cross-lfs ;;
	760	esac
[c044e3c]	761
[a160d86]	762	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	763
	764	#--------------------------------------------------------------------#
	765	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	766	#--------------------------------------------------------------------#
	767	#
	768	# Drop in the name of the target on a new line, and the previous target
	769	# as a dependency. Also call the echo_message function.
[045b2dc]	770	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	771	#
[a160d86]	772	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	773	#
[f546320]	774	if [ "$pkg_tarball" != "" ] ; then
	775	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	776	CHROOT_wrt_TouchTimestamp
[f546320]	777	fi
	778	CHROOT_Unpack "$pkg_tarball"
	779	fi
[877cc6a]	780	#
[f0de954]	781	case $this_script in
	782	fstab) if [[ -n "$FSTAB" ]]; then
	783	CHROOT_wrt_CopyFstab
	784	else
	785	CHROOT_wrt_RunAsRoot "${file}"
	786	fi
	787	;;
	788	*) CHROOT_wrt_RunAsRoot "${file}"
	789	;;
	790	esac
[877cc6a]	791	#
[f546320]	792	# Write installed files log and remove the build directory(ies)
	793	# except if the package build fails.
	794	if [ "$pkg_tarball" != "" ] ; then
	795	CHROOT_wrt_RemoveBuildDirs "$name"
	796	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	797	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	798	fi
	799	fi
[877cc6a]	800	#
	801	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	802	wrt_touch
[877cc6a]	803	#
	804	#--------------------------------------------------------------------#
	805	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	806	#--------------------------------------------------------------------#
	807	#
	808	# Keep the script file name for Makefile dependencies.
	809	PREV=$this_script
	810
	811	done # for file in bootscripts/* ...
	812	}
	813
[608fbe1]	814	#--------------------------------------#
	815	network_Makefiles() { #
	816	#--------------------------------------#
	817
	818	if [[ "${METHOD}" = "chroot" ]]; then
	819	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	820	else
	821	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	822	fi
	823
	824	for file in network/* ; do
	825	# Keep the script file name
	826	this_script=`basename $file`
	827
	828	case $this_script in
[2e1c1c3]	829	*choose) continue ;; # This is not a script but a commentary.
[608fbe1]	830	*dhcp) continue ;; # Assume static networking.
	831	*dhcpcd) continue ;; # Assume static networking.
	832	*) ;;
	833	esac
	834
	835	# First append each name of the script files to a list (this will become
	836	# the names of the targets in the Makefile
	837	networktools="$networktools $this_script"
	838
	839	# Grab the name of the target, strip id number, XXX-script
[4384929]	840	# name1 is partially stripped and should be used for logging files.
	841	# name is completely stripped and is used for grabbing
	842	# the package name.
	843	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	844	name=`echo $name1 \| sed -e 's@-64bit@@' \
	845	-e 's@-64@@' \
	846	-e 's@64@@' \
	847	-e 's@n32@@'`
[608fbe1]	848	case $name in
[b4df9e1]	849	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	850	esac
	851
	852	pkg_tarball=$(get_package_tarball_name $name)
	853
	854	#--------------------------------------------------------------------#
	855	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	856	#--------------------------------------------------------------------#
	857	#
	858	# Drop in the name of the target on a new line, and the previous target
	859	# as a dependency. Also call the echo_message function.
	860	CHROOT_wrt_target "${this_script}" "$PREV"
	861	#
	862	# If $pkg_tarball isn't empty, we've got a package...
	863	#
	864	if [ "$pkg_tarball" != "" ] ; then
	865	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	866	CHROOT_wrt_TouchTimestamp
[608fbe1]	867	fi
	868	CHROOT_Unpack "$pkg_tarball"
	869	fi
	870	#
	871	CHROOT_wrt_RunAsRoot "${file}"
	872	#
	873	# Write installed files log and remove the build directory(ies)
	874	# except if the package build fails.
	875	if [ "$pkg_tarball" != "" ] ; then
	876	CHROOT_wrt_RemoveBuildDirs "$name"
	877	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	878	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	879	fi
	880	fi
	881	#
	882	# Include a touch of the target name so make can check if it's already been made.
	883	wrt_touch
	884	#
	885	#--------------------------------------------------------------------#
	886	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	887	#--------------------------------------------------------------------#
	888	#
	889	# Keep the script file name for Makefile dependencies.
	890	PREV=$this_script
	891
	892	done # for file in network/* ...
	893	}
	894
[045b2dc]	895	#--------------------------------------#
[d55a1a1]	896	bootable_Makefiles() { #
[045b2dc]	897	#--------------------------------------#
[877cc6a]	898
[d55a1a1]	899	if [[ "${METHOD}" = "chroot" ]]; then
	900	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	901	else
	902	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	903	fi
[877cc6a]	904
	905
[936efa8]	906	for file in bootable/* ; do
[877cc6a]	907	# Keep the script file name
	908	this_script=`basename $file`
	909
	910	# A little housekeeping on the scripts
	911	case $this_script in
	912	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[d601cfc]	913	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	914	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	915	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	916	*kernel) # if there is no kernel config file do not build the kernel
	917	[[ -z $CONFIG ]] && continue
	918	# Copy the config file to /sources with a standardized name
[85506da]	919	[[ $CONFIG == $BUILDDIR/sources/kernel-config ]] \|\|
[877cc6a]	920	cp $CONFIG $BUILDDIR/sources/kernel-config
	921	;;
	922	esac
	923	#
	924	# First append each name of the script files to a list (this will become
	925	# the names of the targets in the Makefile
	926	bootabletools="$bootabletools $this_script"
	927	#
	928	# Grab the name of the target, strip id number and misc words.
	929	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	930	case $this_script in
	931	kernel) name=linux
	932	;;
	933	esac
[a160d86]	934
	935	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	936
	937	#--------------------------------------------------------------------#
	938	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	939	#--------------------------------------------------------------------#
	940	#
	941	# Drop in the name of the target on a new line, and the previous target
	942	# as a dependency. Also call the echo_message function.
[045b2dc]	943	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	944	#
[a160d86]	945	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	946	# Insert instructions for unpacking the package and changing directories
	947	#
[f546320]	948	if [ "$pkg_tarball" != "" ] ; then
	949	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	950	CHROOT_wrt_TouchTimestamp
[f546320]	951	fi
	952	CHROOT_Unpack "$pkg_tarball"
	953	fi
[877cc6a]	954	#
	955	# Select a script execution method
	956	case $this_script in
[045b2dc]	957	fstab) if [[ -n "$FSTAB" ]]; then
	958	CHROOT_wrt_CopyFstab
	959	else
	960	CHROOT_wrt_RunAsRoot "${file}"
	961	fi
	962	;;
	963	*) CHROOT_wrt_RunAsRoot "${file}"
	964	;;
[877cc6a]	965	esac
	966	#
[f546320]	967	# Write installed files log and remove the build directory(ies)
	968	# except if the package build fails.
	969	if [ "$pkg_tarball" != "" ] ; then
	970	CHROOT_wrt_RemoveBuildDirs "$name"
	971	if [ "${INSTALL_LOG}" = "y" ] ; then
	972	CHROOT_wrt_LogNewFiles "$name"
	973	fi
	974	fi
[877cc6a]	975	#
	976	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	977	wrt_touch
[877cc6a]	978	#
	979	#--------------------------------------------------------------------#
	980	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	981	#--------------------------------------------------------------------#
	982	#
	983	# Keep the script file name for Makefile dependencies.
	984	PREV=$this_script
	985
	986	done
	987
	988	}
	989
	990
[045b2dc]	991	#--------------------------------------#
	992	build_Makefile() { # Construct a Makefile from the book scripts
	993	#--------------------------------------#
	994
	995	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	996
	997	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	998	# Start with clean files
[045b2dc]	999	>$MKFILE
[877cc6a]	1000	>$MKFILE.tmp
	1001
[d55a1a1]	1002	method_cmds=${METHOD}_Makefiles
[045b2dc]	1003
	1004	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
[3f83cb0]	1005	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
[045b2dc]	1006	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1007	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1008	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1009	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	1010	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	1011	fi
[d55a1a1]	1012	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	1013	# Add the iterations targets, if needed
	1014	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	1015	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[2e1c1c3]	1016	if [ -d network ]; then
[608fbe1]	1017	network_Makefiles # If present, process network setup.
	1018	fi
[d55a1a1]	1019	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	1020
[3e7ceed]	1021	# Add the CUSTOM_TOOLS targets, if needed
	1022	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	1023
[877cc6a]	1024	# Add a header, some variables and include the function file
	1025	# to the top of the real Makefile.
[195ed9f]	1026	wrt_Makefile_header
[877cc6a]	1027
	1028	# Add chroot commands
	1029	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1030	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	1031	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	1032	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	1033	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	1034	-e '/^export/d' \
	1035	-e '/^logout/d' \
	1036	-e 's@ \\\@ @g' \| \
	1037	tr -d '\n' \| \
	1038	sed -e 's/ */ /g' \
	1039	-e 's\|\\$\|&&\|g' \
	1040	-e 's\|exit\|\|g' \
	1041	-e 's\|$\| -c\|' \
[f4d9a48]	1042	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	1043	-e 's\|set -e\|\|' \
	1044	-e 's\|set +h\|\|'`
[877cc6a]	1045	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1046	fi
	1047
[045b2dc]	1048	################## CHROOT ####################
	1049
[877cc6a]	1050	if [[ "${METHOD}" = "chroot" ]]; then
	1051	(
[045b2dc]	1052	cat << EOF
[877cc6a]	1053
[3f83cb0]	1054	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	1055	@sudo make do-housekeeping
[936efa8]	1056	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1057	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1058	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1059	@\$(call echo_finished,$VERSION)
[a160d86]	1060
[045b2dc]	1061	ck_UID:
	1062	@if [ \`id -u\` = "0" ]; then \\
	1063	echo "+--------------------------------------------------+"; \\
	1064	echo "\|You cannot run this makefile from the root account\|"; \\
	1065	echo "+--------------------------------------------------+"; \\
	1066	exit 1; \\
	1067	fi
	1068
	1069	#---------------AS ROOT
	1070	mk_SETUP:
	1071	@\$(call echo_SU_request)
[7a43320]	1072	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1073	@touch \$@
	1074
	1075	#---------------AS LUSER
[3f83cb0]	1076	mk_F_PREPS: mk_SETUP
	1077	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
[730436a]	1078	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1079	@sudo make restore-luser-env
	1080	@touch \$@
	1081
[3f83cb0]	1082	mk_SUDO: mk_F_PREPS
[7a43320]	1083	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1084	@touch \$@
	1085
	1086	#---------------CHROOT JAIL
	1087	mk_SYSTOOLS: mk_SUDO
	1088	@\$(call echo_CHROOT_request)
	1089	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1090	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1091	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1092	@touch \$@
[877cc6a]	1093
[269d81c]	1094	mk_BLFS_TOOL: create-sbu_du-report
	1095	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1096	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1097	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1098	fi;
	1099	@touch \$@
	1100
	1101	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1102	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1103	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1104	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1105	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1106	fi;
	1107	@touch \$@
	1108
[6c1b96b]	1109	SETUP: $host_prep
[3f83cb0]	1110	AS_LUSER: $final_preps $cross_tools $temptools
[6c1b96b]	1111	SUDO: $orphan_scripts
	1112	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1113	PREP_CHROOT_JAIL: ${chroottools}
	1114	CHROOT_JAIL: SHELL=/tools/bin/bash
	1115	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1116	CUSTOM_TOOLS: $custom_list
[877cc6a]	1117
[1838bc7]	1118
	1119	create-sbu_du-report: mk_SYSTOOLS
	1120	@\$(call echo_message, Building)
	1121	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
[c57747d]	1122	./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
[1838bc7]	1123	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1124	fi;
	1125	@touch \$@
	1126
[7d9a82d]	1127	do-housekeeping:
[59bb076]	1128	@-umount \$(MOUNT_PT)/sys
	1129	@-umount \$(MOUNT_PT)/proc
	1130	@-if mountpoint -q \$(MOUNT_PT)/run; then \\
	1131	umount \$(MOUNT_PT)/run; \\
	1132	elif [ -h \$(MOUNT_PT)/dev/shm ]; then \\
[269d81c]	1133	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1134	umount \$(MOUNT_PT)/\$\$link; \\
	1135	unset link; \\
	1136	else \\
	1137	umount \$(MOUNT_PT)/dev/shm; \\
	1138	fi
[59bb076]	1139	@-umount \$(MOUNT_PT)/dev/pts
[4524fb2]	1140	@-umount \$(MOUNT_PT)/dev
[045b2dc]	1141	@-rm /tools /cross-tools
[6ad5a2f]	1142	@-if [ ! -f luser-exist ]; then \\
	1143	userdel \$(LUSER); \\
[962793a]	1144	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1145	fi;
[877cc6a]	1146	EOF
	1147	) >> $MKFILE
[045b2dc]	1148
[877cc6a]	1149	fi
	1150
[045b2dc]	1151	################### BOOT #####################
[877cc6a]	1152
	1153	if [[ "${METHOD}" = "boot" ]]; then
	1154	(
[045b2dc]	1155	cat << EOF
[877cc6a]	1156
[3f83cb0]	1157	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
[045b2dc]	1158	@sudo make restore-luser-env
	1159	@sudo make do-housekeeping
[877cc6a]	1160	@\$(call echo_boot_finished,$VERSION)
	1161
[3e7ceed]	1162	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1163	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1164	@\$(call echo_finished,$VERSION)
	1165
	1166
[045b2dc]	1167	ck_UID:
	1168	@if [ \`id -u\` = "0" ]; then \\
	1169	echo "+--------------------------------------------------+"; \\
	1170	echo "\|You cannot run this makefile from the root account\|"; \\
	1171	echo "\|However, if this is the boot environment \|"; \\
	1172	echo "\| the command you are looking for is \|"; \\
	1173	echo "\| make makesys \|"; \\
[730436a]	1174	echo "\| to complete the build \|"; \\
[045b2dc]	1175	echo "+--------------------------------------------------+"; \\
	1176	exit 1; \\
	1177	fi
[877cc6a]	1178
[045b2dc]	1179	#---------------AS ROOT
[877cc6a]	1180
[045b2dc]	1181	mk_SETUP:
	1182	@\$(call echo_SU_request)
[7a43320]	1183	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1184	@touch \$@
	1185
	1186	#---------------AS LUSER
[a160d86]	1187
[3f83cb0]	1188	mk_F_PREPS: mk_SETUP
	1189	@\$(call echo_PHASE,Final Preparations and Cross Tools)
[730436a]	1190	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1191	@touch \$@
	1192
[3f83cb0]	1193	mk_SUDO: mk_F_PREPS
[7a43320]	1194	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1195	@touch \$@
	1196
	1197	#---------------AS ROOT
	1198
	1199	mk_FINAL:
	1200	@\$(call echo_PHASE,Final System)
[7a43320]	1201	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1202	@touch \$@
	1203
[269d81c]	1204	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1205	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1206	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1207	( make -C $BLFS_ROOT/work ); \\
	1208	fi;
	1209	@touch \$@
[269d81c]	1210
	1211	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1212	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1213	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1214	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1215	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1216	fi;
	1217	@touch \$@
	1218
	1219	SETUP: $host_prep
[3f83cb0]	1220	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
[3e7ceed]	1221	SUDO: $orphan_scripts
[aec4483]	1222	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1223	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1224	CUSTOM_TOOLS: $custom_list
[045b2dc]	1225
	1226	do-housekeeping:
	1227	@-rm /tools /cross-tools
	1228	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1229	userdel \$(LUSER); \\
[962793a]	1230	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1231	fi;
	1232
[045b2dc]	1233	EOF
	1234	) >> $MKFILE
	1235	fi
	1236
	1237	(
	1238	cat << EOF
	1239
[6ad5a2f]	1240	restore-luser-env:
[877cc6a]	1241	@\$(call echo_message, Building)
[962793a]	1242	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1243	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1244	fi;
[962793a]	1245	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1246	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1247	fi;
[962793a]	1248	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1249	touch \$@ && \\
	1250	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1251	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1252
[045b2dc]	1253	########################################################
	1254
[7d9a82d]	1255
[877cc6a]	1256	EOF
	1257	) >> $MKFILE
	1258
	1259	# Bring over the items from the Makefile.tmp
	1260	cat $MKFILE.tmp >> $MKFILE
	1261	rm $MKFILE.tmp
	1262
[045b2dc]	1263	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1264	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: