Context Navigation

source: CLFS/master.sh@ 423c229

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 423c229 was 401f81e, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Ported Makefile clean-up and 0/1 to n/y migration code from experimental. There is no obvious bugs, let users to find hidden bugs.
Property mode set to `100755`
File size: 42.5 KB

Rev	Line
[877cc6a]	1	#!/bin/sh
	2	# $Id$
	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9	#----------------------------#
	10	host_prep_Makefiles() { # Initialization of the system
	11	#----------------------------#
[e2ec07a]	12	local CLFS_HOST
[877cc6a]	13
	14	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files${R_arrow}"
	15
	16	# defined here, only for ease of reading
[ff4d1ab]	17	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	18	(
	19	cat << EOF
	20	023-creatingtoolsdir:
	21	@\$(call echo_message, Building)
[e314f7e]	22	@mkdir \$(MOUNT_PT)/tools && \\
	23	rm -f /tools && \\
	24	ln -s \$(MOUNT_PT)/tools /
[877cc6a]	25	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	26	mkdir \$(MOUNT_PT)/sources; \\
	27	fi;
	28	@chmod a+wt \$(MOUNT_PT)/sources && \\
[93f38e7]	29	touch \$@ && \\
	30	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	31	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	32
	33	024-creatingcrossdir: 023-creatingtoolsdir
	34	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	35	rm -f /cross-tools && \\
	36	ln -s \$(MOUNT_PT)/cross-tools /
[93f38e7]	37	@touch \$@ && \\
	38	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	39	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	40
	41	025-addinguser: 024-creatingcrossdir
	42	@\$(call echo_message, Building)
[6ad5a2f]	43	@if [ ! -d /home/\$(LUSER) ]; then \\
	44	groupadd \$(LGROUP); \\
	45	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[877cc6a]	46	else \\
[6ad5a2f]	47	touch luser-exist; \\
[877cc6a]	48	fi;
[6ad5a2f]	49	@chown \$(LUSER) \$(MOUNT_PT) && \\
	50	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
	51	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
	52	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
[93f38e7]	53	touch \$@ && \\
	54	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	55	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	56
	57	026-settingenvironment: 025-addinguser
	58	@\$(call echo_message, Building)
[6ad5a2f]	59	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	60	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[877cc6a]	61	fi;
[6ad5a2f]	62	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	63	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[877cc6a]	64	fi;
[6ad5a2f]	65	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	66	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	67	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	68	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	69	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	70	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	71	echo "" >> /home/\$(LUSER)/.bashrc && \\
	72	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	73	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	74	echo "" >> /home/\$(LUSER)/.bashrc && \\
	75	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	76	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	77	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	78	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	79	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[877cc6a]	80	touch envars && \\
[93f38e7]	81	touch \$@ && \\
	82	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	83	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	84	EOF
	85	) >> $MKFILE.tmp
	86
	87	}
	88
	89
	90
	91	#-----------------------------#
	92	cross_tools_Makefiles() { #
	93	#-----------------------------#
	94	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools${R_arrow}"
	95
	96	for file in cross-tools/* ; do
	97	# Keep the script file name
	98	this_script=`basename $file`
	99	#
	100	# Skip this script...
	101	case $this_script in
	102	cflags \| variables ) # work done in host_prep_Makefiles
	103	continue; ;;
	104	*) ;;
	105	esac
	106	#
	107	# Set the dependency for the first target.
	108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	109
	110	# First append each name of the script files to a list (this will become
	111	# the names of the targets in the Makefile
	112	cross_tools="$cross_tools $this_script"
	113
	114	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	115	# and binutils in chapter 5)
	116	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	117	-e 's@-static@@' \
	118	-e 's@-final@@' \
[a160d86]	119	-e 's@-64@@' \
[877cc6a]	120	-e 's@-n32@@'`
[a160d86]	121	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	122
	123	#--------------------------------------------------------------------#
	124	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	125	#--------------------------------------------------------------------#
	126	#
	127	# Drop in the name of the target on a new line, and the previous target
	128	# as a dependency. Also call the echo_message function.
[041bc01]	129	wrt_target "${this_script}" "$PREV"
[877cc6a]	130	#
[a160d86]	131	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	132	#
[6ad5a2f]	133	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[877cc6a]	134	#
[6ad5a2f]	135	wrt_RunAsUser "${this_script}" "${file}"
[877cc6a]	136	#
[a160d86]	137	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	138	#
	139	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	140	wrt_touch
[877cc6a]	141	#
	142	#--------------------------------------------------------------------#
	143	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	144	#--------------------------------------------------------------------#
	145	#
	146	# Keep the script file name for Makefile dependencies.
	147	PREV=$this_script
	148
	149	done # for file in ....
	150	}
	151
	152
	153	#-----------------------------#
	154	temptools_Makefiles() { #
	155	#-----------------------------#
	156	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system${R_arrow}"
	157
	158	for file in temp-system/* ; do
	159	# Keep the script file name
	160	this_script=`basename $file`
[6f2cd96]	161	#
	162	# Deal with any odd scripts..
	163	case $this_script in
	164	*choose) # The choose script will fail if you cannot enter the new environment
	165	# If the 'boot' build method was chosen don't run the script
	166	[[ $METHOD = "boot" ]] && continue; ;;
	167	*) ;;
	168	esac
[e2ec07a]	169
[877cc6a]	170	#
	171	# First append each name of the script files to a list (this will become
	172	# the names of the targets in the Makefile
	173	temptools="$temptools $this_script"
	174
	175	#
	176	# Grab the name of the target, strip id number, XXX-script
	177	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	178	#
[a160d86]	179	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	180
	181	#--------------------------------------------------------------------#
	182	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	183	#--------------------------------------------------------------------#
	184	#
	185	# Drop in the name of the target on a new line, and the previous target
	186	# as a dependency. Also call the echo_message function.
[041bc01]	187	wrt_target "${this_script}" "$PREV"
[877cc6a]	188	#
[a160d86]	189	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	190	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	191	#
[6ad5a2f]	192	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[a160d86]	193	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	194	#
[6ad5a2f]	195	wrt_RunAsUser "${this_script}" "${file}"
[877cc6a]	196	#
[a160d86]	197	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	198	#
	199	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	200	wrt_touch
[877cc6a]	201	#
	202	#--------------------------------------------------------------------#
	203	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	204	#--------------------------------------------------------------------#
	205	#
	206	# Keep the script file name for Makefile dependencies.
	207	PREV=$this_script
	208	done # for file in ....
	209	}
	210
	211
	212	#-----------------------------#
	213	boot_Makefiles() { #
	214	#-----------------------------#
	215	echo "${tab_}${GREEN}Processing... ${L_arrow}boot${R_arrow}"
	216
	217	for file in boot/* ; do
	218	# Keep the script file name
	219	this_script=`basename $file`
	220
	221	# A little housekeeping on the scripts
	222	case $this_script in
	223	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
	224	whatnext) continue ;;
	225	*kernel) # if there is no kernel config file do not build the kernel
	226	[[ -z $CONFIG ]] && continue
	227	# Copy the config file to /sources with a standardized name
	228	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	229	;;
	230	esac
	231	#
	232	# First append each name of the script files to a list (this will become
	233	# the names of the targets in the Makefile
	234	boottools="$boottools $this_script"
	235	#
	236	# Grab the name of the target, strip id number and misc words.
	237	case $this_script in
	238	*kernel) name=linux ;;
	239	*bootscripts) name="bootscripts-cross-lfs" ;;
	240	*udev-rules) name="udev-cross-lfs" ;;
	241	*grub-build) name=grub ;;
	242	*-aboot-build) name=aboot ;;
	243	*yaboot-build) name=yaboot ;;
	244	*colo-build) name=colo ;;
	245	*silo-build) name=silo ;;
	246	*arcload-build) name=arcload ;;
	247	*lilo-build) name=lilo ;;
	248	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	249	esac
[c044e3c]	250	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	251	pkg_tarball=$(get_package_tarball_name $name)
	252
[877cc6a]	253	#--------------------------------------------------------------------#
	254	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	255	#--------------------------------------------------------------------#
	256	#
	257	# Drop in the name of the target on a new line, and the previous target
	258	# as a dependency. Also call the echo_message function.
[041bc01]	259	wrt_target "${this_script}" "$PREV"
[877cc6a]	260	#
[a160d86]	261	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	262	# Insert instructions for unpacking the package and changing directories
	263	#
[6ad5a2f]	264	[[ "$pkg_tarball" != "" ]] && wrt_unpack "$pkg_tarball"
[a160d86]	265	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	266	#
	267	# Select a script execution method
	268	case $this_script in
[6ad5a2f]	269	changingowner) wrt_RunAsRoot "${this_script}" "${file}" ;;
	270	devices) wrt_RunAsRoot "${this_script}" "${file}" ;;
[877cc6a]	271	fstab) if [[ -n "$FSTAB" ]]; then
	272	wrt_copy_fstab "${this_script}"
	273	else
[6ad5a2f]	274	wrt_RunAsUser "${this_script}" "${file}"
[877cc6a]	275	fi
	276	;;
[6ad5a2f]	277	*) wrt_RunAsUser "${this_script}" "${file}" ;;
[877cc6a]	278	esac
	279	#
	280	# Housekeeping...remove any build directory(ies) except if the package build fails.
[a160d86]	281	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	282	#
	283	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	284	wrt_touch
[877cc6a]	285	#
	286	#--------------------------------------------------------------------#
	287	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	288	#--------------------------------------------------------------------#
	289	#
	290	# Keep the script file name for Makefile dependencies.
	291	PREV=$this_script
	292
	293	done
	294	}
	295
	296
	297	#-----------------------------#
	298	chroot_Makefiles() { #
	299	#-----------------------------#
	300	echo "${tab_}${GREEN}Processing... ${L_arrow}chroot${R_arrow}"
	301
	302	for file in chroot/* ; do
	303	# Keep the script file name
	304	this_script=`basename $file`
	305	#
	306	# Skipping scripts is done now and not included in the build tree.
	307	case $this_script in
	308	chroot) continue ;;
	309	esac
	310
	311	#
	312	# First append each name of the script files to a list (this will become
	313	# the names of the targets in the Makefile
	314	chroottools="$chroottools $this_script"
	315
	316	# Grab the name of the target, strip id number, XXX-script
	317	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
[a160d86]	318
	319	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	320
	321	#--------------------------------------------------------------------#
	322	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	323	#--------------------------------------------------------------------#
	324	#
	325	# Drop in the name of the target on a new line, and the previous target
	326	# as a dependency. Also call the echo_message function.
[041bc01]	327	wrt_target "${this_script}" "$PREV"
[877cc6a]	328	#
[a160d86]	329	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	330	# Insert instructions for unpacking the package and changing directories
	331	#
[a160d86]	332	if [ "$pkg_tarball" != "" ] ; then
[877cc6a]	333	case $this_script in
[6ad5a2f]	334	*util-linux) wrt_unpack "$pkg_tarball" ;;
[a160d86]	335	*) wrt_unpack2 "$pkg_tarball" ;;
[877cc6a]	336	esac
[1b65a84]	337	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	338	fi
	339	#
	340	# Select a script execution method
	341	case $this_script in
[6ad5a2f]	342	*kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;;
	343	*util-linux) wrt_RunAsUser "${this_script}" "${file}" ;;
	344	*) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
[877cc6a]	345	esac
	346	#
	347	# Housekeeping...remove the build directory(ies), except if the package build fails.
[a160d86]	348	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	349	#
	350	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	351	wrt_touch
[877cc6a]	352	#
	353	#--------------------------------------------------------------------#
	354	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	355	#--------------------------------------------------------------------#
	356	#
	357	# Keep the script file name for Makefile dependencies.
	358	PREV=$this_script
	359
	360	done # for file in...
	361	}
	362
	363
	364	#-----------------------------#
	365	testsuite_tools_Makefiles() { #
	366	#-----------------------------#
	367	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools${R_arrow}"
	368
	369	for file in testsuite-tools/* ; do
	370	# Keep the script file name
	371	this_script=`basename $file`
	372
	373	# First append each name of the script files to a list (this will become
	374	# the names of the targets in the Makefile
	375	testsuitetools="$testsuitetools $this_script"
	376
	377	# Grab the name of the target, strip id number, XXX-script
	378	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	379	-e 's@-64bit@@' \
	380	-e 's@-64@@' \
	381	-e 's@64@@' \
	382	-e 's@n32@@'`
	383
[a160d86]	384	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	385
	386	#--------------------------------------------------------------------#
	387	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	388	#--------------------------------------------------------------------#
	389	#
	390	# Drop in the name of the target on a new line, and the previous target
	391	# as a dependency. Also call the echo_message function.
[041bc01]	392	wrt_target "${this_script}" "$PREV"
[877cc6a]	393	#
[06cf3c1]	394	wrt_unpack2 "$pkg_tarball"
[1b65a84]	395	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	396	#
	397	wrt_run_as_chroot1 "${this_script}" "${file}"
	398	#
	399	wrt_remove_build_dirs "${name}"
	400	#
	401	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	402	wrt_touch
[877cc6a]	403	#
	404	#--------------------------------------------------------------------#
	405	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	406	#--------------------------------------------------------------------#
	407	#
	408	# Keep the script file name for Makefile dependencies.
	409	PREV=$this_script
	410
	411	done
	412	}
	413
	414
	415	#--------------------------------#
	416	bm_testsuite_tools_Makefiles() { #
	417	#--------------------------------#
	418	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools${R_arrow}"
	419
	420	for file in testsuite-tools/* ; do
	421	# Keep the script file name
	422	this_script=`basename $file`
	423
	424	# First append each name of the script files to a list (this will become
	425	# the names of the targets in the Makefile
	426	PREV=
	427	testsuitetools="$testsuitetools $this_script"
	428
	429	# Grab the name of the target, strip id number, XXX-script
	430	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	431	-e 's@-64bit@@' \
	432	-e 's@-64@@' \
	433	-e 's@64@@' \
	434	-e 's@n32@@'`
	435
[a160d86]	436	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	437
	438	#--------------------------------------------------------------------#
	439	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	440	#--------------------------------------------------------------------#
	441	#
	442	# Drop in the name of the target on a new line, and the previous target
	443	# as a dependency. Also call the echo_message function.
[7eb9402]	444	wrt_target_boot "${this_script}" "$PREV"
[877cc6a]	445	#
[06cf3c1]	446	wrt_unpack3 "$pkg_tarball"
[1b65a84]	447	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	448	#
	449	wrt_run_as_root2 "${this_script}" "${file}"
	450	#
	451	wrt_remove_build_dirs2 "${name}"
	452	#
	453	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	454	wrt_touch
[877cc6a]	455	#
	456	#--------------------------------------------------------------------#
	457	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	458	#--------------------------------------------------------------------#
	459	#
	460	# Keep the script file name for Makefile dependencies.
	461	PREV=$this_script
	462
	463	done
	464	}
	465
	466
	467	#-----------------------------#
	468	final_system_Makefiles() { #
	469	#-----------------------------#
[45f82718]	470	# Set envars and scripts for iteration targets
	471	LOGS="" # Start with an empty global LOGS envar
	472	if [[ -z "$1" ]] ; then
	473	local N=""
	474	else
	475	local N=-build_$1
	476	local basicsystem=""
	477	mkdir final-system$N
	478	cp final-system/* final-system$N
	479	for script in final-system$N/* ; do
	480	# Overwrite existing symlinks, files, and dirs
	481	sed -e 's/ln -sv/&f/g' \
	482	-e 's/mv -v/&f/g' \
	483	-e 's/mkdir -v/&p/g' -i ${script}
	484	done
	485	# Remove Bzip2 binaries before make install
	486	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	487	# Delete *old Readline libraries just after make install
	488	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	489	fi
	490
	491	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N${R_arrow}"
[877cc6a]	492
[45f82718]	493	for file in final-system$N/* ; do
[877cc6a]	494	# Keep the script file name
	495	this_script=`basename $file`
	496
[45f82718]	497	# Test if the stripping phase must be skipped.
	498	# Skip alsp temp-perl for iterative runs
[877cc6a]	499	case $this_script in
[401f81e]	500	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	501	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	502	esac
	503
	504	# Grab the name of the target, strip id number, XXX-script
	505	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	506	-e 's@temp-@@' \
	507	-e 's@-64bit@@' \
	508	-e 's@-64@@' \
	509	-e 's@64@@' \
	510	-e 's@n32@@'`
	511
[45f82718]	512	# Find the version of the command files, if it corresponds with the building of
	513	# a specific package. We need this here to can skip scripts not needed for
	514	# iterations rebuilds
[a160d86]	515	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	516
[a160d86]	517	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	518	case "${this_script}" in
	519	stripping) ;;
	520	*) continue ;;
	521	esac
	522	fi
	523
	524	# Append each name of the script files to a list (this will become
	525	# the names of the targets in the Makefile
	526	basicsystem="$basicsystem ${this_script}${N}"
	527
	528	# Append each name of the script files to a list (this will become
	529	# the names of the logs to be moved for each iteration)
	530	LOGS="$LOGS ${this_script}"
	531
[877cc6a]	532	#--------------------------------------------------------------------#
	533	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	534	#--------------------------------------------------------------------#
	535	#
	536	# Drop in the name of the target on a new line, and the previous target
	537	# as a dependency. Also call the echo_message function.
[45f82718]	538	wrt_target "${this_script}${N}" "$PREV"
[877cc6a]	539
[a160d86]	540	# If $pkg_tarball isn't empty, we've got a package...
	541	if [ "$pkg_tarball" != "" ] ; then
	542	wrt_unpack2 "$pkg_tarball"
[a229600]	543	# If the testsuites must be run, initialize the log file
	544	case $name in
	545	binutils \| gcc \| glibc )
	546	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
	547	;;
	548	* )
	549	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && wrt_test_log2 "${this_script}"
	550	;;
	551	esac
	552	# If using optimizations, write the instructions
[1b65a84]	553	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	554	fi
	555	#
	556	wrt_run_as_chroot1 "${this_script}" "${file}"
	557	#
[a160d86]	558	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	559	#
	560	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	561	wrt_touch
[877cc6a]	562	#
	563	#--------------------------------------------------------------------#
	564	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	565	#--------------------------------------------------------------------#
	566	#
	567	# Keep the script file name for Makefile dependencies.
[45f82718]	568	PREV=${this_script}${N}
	569	# Set system_build envar for iteration targets
	570	system_build=$basicsystem
[877cc6a]	571	done # for file in final-system/* ...
	572	}
	573
	574
	575	#-----------------------------#
	576	bm_final_system_Makefiles() { #
	577	#-----------------------------#
[45f82718]	578	# Set envars and scripts for iteration targets
	579	LOGS="" # Start with an empty global LOGS envar
	580	if [[ -z "$1" ]] ; then
	581	local N=""
	582	# The makesys phase was initiated in bm_testsuite_tools_makefile
	583	[[ "$TEST" = 0 ]] && PREV=""
	584	else
	585	local N=-build_$1
	586	local basicsystem=""
	587	mkdir final-system$N
	588	cp final-system/* final-system$N
	589	for script in final-system$N/* ; do
	590	# Overwrite existing symlinks, files, and dirs
	591	sed -e 's/ln -sv/&f/g' \
	592	-e 's/mv -v/&f/g' \
	593	-e 's/mkdir -v/&p/g' -i ${script}
	594	done
	595	# Remove Bzip2 binaries before make install
	596	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	597	# Delete *old Readline libraries just after make install
	598	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	599	fi
[877cc6a]	600
[45f82718]	601	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N${R_arrow}"
[877cc6a]	602
[45f82718]	603	for file in final-system$N/* ; do
[877cc6a]	604	# Keep the script file name
	605	this_script=`basename $file`
	606
	607	# Test if the stripping phase must be skipped
[45f82718]	608	# Skip alsp temp-perl for iterative runs
[877cc6a]	609	case $this_script in
[401f81e]	610	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	611	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	612	esac
	613
	614	# Grab the name of the target, strip id number, XXX-script
	615	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	616	-e 's@temp-@@' \
	617	-e 's@-64bit@@' \
	618	-e 's@-64@@' \
	619	-e 's@64@@' \
	620	-e 's@n32@@'`
	621
[45f82718]	622	# Find the version of the command files, if it corresponds with the building of
	623	# a specific package. We need this here to can skip scripts not needed for
	624	# iterations rebuilds
[877cc6a]	625
[a160d86]	626	pkg_tarball=$(get_package_tarball_name $name)
	627
	628	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	629	case "${this_script}" in
	630	stripping) ;;
	631	*) continue ;;
	632	esac
	633	fi
	634
	635	# Append each name of the script files to a list (this will become
	636	# the names of the targets in the Makefile
	637	basicsystem="$basicsystem ${this_script}${N}"
	638
	639	# Append each name of the script files to a list (this will become
	640	# the names of the logs to be moved for each iteration)
	641	LOGS="$LOGS ${this_script}"
	642
[877cc6a]	643	#--------------------------------------------------------------------#
	644	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	645	#--------------------------------------------------------------------#
	646	#
	647	# Drop in the name of the target on a new line, and the previous target
	648	# as a dependency. Also call the echo_message function.
[7eb9402]	649	wrt_target_boot "${this_script}${N}" "$PREV"
[877cc6a]	650
[a160d86]	651	# If $pkg_tarball isn't empty, we've got a package...
	652	if [ "$pkg_tarball" != "" ] ; then
	653	FILE="$pkg_tarball"
[45f82718]	654	wrt_unpack3 "$FILE"
[a229600]	655	# If the testsuites must be run, initialize the log file
	656	case $name in
	657	binutils \| gcc \| glibc )
	658	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
	659	;;
	660	* )
	661	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && wrt_test_log2 "${this_script}"
	662	;;
	663	esac
	664	# If using optimizations, write the instructions
[1b65a84]	665	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	666	fi
	667	#
	668	wrt_run_as_root2 "${this_script}" "${file}"
	669	#
[a160d86]	670	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[877cc6a]	671	#
	672	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	673	wrt_touch
[877cc6a]	674	#
	675	#--------------------------------------------------------------------#
	676	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	677	#--------------------------------------------------------------------#
	678	#
	679	# Keep the script file name for Makefile dependencies.
[45f82718]	680	PREV=${this_script}${N}
	681	# Set system_build envar for iteration targets
	682	system_build=$basicsystem
[877cc6a]	683	done # for file in final-system/* ...
	684	}
	685
	686
	687	#-----------------------------#
	688	bootscripts_Makefiles() { #
	689	#-----------------------------#
	690	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts${R_arrow}"
	691
	692	for file in bootscripts/* ; do
	693	# Keep the script file name
	694	this_script=`basename $file`
	695
	696	case $this_script in
	697	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	698	console) continue ;; # Use the files that came with the bootscripts
	699	*) ;;
	700	esac
	701
	702	# First append each name of the script files to a list (this will become
	703	# the names of the targets in the Makefile
	704	bootscripttools="$bootscripttools $this_script"
	705
	706	# Grab the name of the target, strip id number, XXX-script
	707	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	708	-e 's@-64bit@@' \
	709	-e 's@-64@@' \
	710	-e 's@64@@' \
	711	-e 's@n32@@'`
	712	case $name in
[c044e3c]	713	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	714	*udev-rules) name=udev-cross-lfs ;;
	715	esac
[c044e3c]	716
[a160d86]	717	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	718
	719	#--------------------------------------------------------------------#
	720	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	721	#--------------------------------------------------------------------#
	722	#
	723	# Drop in the name of the target on a new line, and the previous target
	724	# as a dependency. Also call the echo_message function.
[041bc01]	725	wrt_target "${this_script}" "$PREV"
[877cc6a]	726	#
[a160d86]	727	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	728	#
[a160d86]	729	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
[877cc6a]	730	#
	731	wrt_run_as_chroot1 "${this_script}" "${file}"
	732	#
[a160d86]	733	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	734	#
	735	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	736	wrt_touch
[877cc6a]	737	#
	738	#--------------------------------------------------------------------#
	739	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	740	#--------------------------------------------------------------------#
	741	#
	742	# Keep the script file name for Makefile dependencies.
	743	PREV=$this_script
	744
	745	done # for file in bootscripts/* ...
	746
	747	}
	748
	749	#-----------------------------#
	750	bm_bootscripts_Makefiles() { #
	751	#-----------------------------#
	752	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts${R_arrow}"
	753
	754	for file in bootscripts/* ; do
	755	# Keep the script file name
	756	this_script=`basename $file`
	757
	758	case $this_script in
[33c7b13]	759	*udev) continue ;; # This is not a script but a commentary
[877cc6a]	760	console) continue ;; # Use the files that came with the bootscripts
	761	*) ;;
	762	esac
	763
	764	# First append each name of the script files to a list (this will become
	765	# the names of the targets in the Makefile
	766	bootscripttools="$bootscripttools $this_script"
	767
	768	# Grab the name of the target, strip id number, XXX-script
	769	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	770	-e 's@-64bit@@' \
	771	-e 's@-64@@' \
	772	-e 's@64@@' \
	773	-e 's@n32@@'`
	774	case $name in
[33c7b13]	775	bootscripts) name=bootscripts-cross-lfs ;;
	776	*udev-rules) name=udev-cross-lfs ;;
[877cc6a]	777	esac
[a160d86]	778
	779	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	780
	781	#--------------------------------------------------------------------#
	782	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	783	#--------------------------------------------------------------------#
	784	#
	785	# Drop in the name of the target on a new line, and the previous target
	786	# as a dependency. Also call the echo_message function.
[7eb9402]	787	wrt_target_boot "${this_script}" "$PREV"
[877cc6a]	788	#
[a160d86]	789	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	790	#
[a160d86]	791	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
[877cc6a]	792	#
	793	wrt_run_as_root2 "${this_script}" "${file}"
	794	#
[a160d86]	795	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[877cc6a]	796	#
	797	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	798	wrt_touch
[877cc6a]	799	#
	800	#--------------------------------------------------------------------#
	801	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	802	#--------------------------------------------------------------------#
	803	#
	804	# Keep the script file name for Makefile dependencies.
	805	PREV=$this_script
	806
	807	done # for file in bootscripts/* ...
	808
	809	}
	810
	811
	812
	813	#-----------------------------#
	814	bootable_Makefiles() { #
	815	#-----------------------------#
	816	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable${R_arrow}"
	817
	818	for file in {bootable,the-end}/* ; do
	819	# Keep the script file name
	820	this_script=`basename $file`
	821
	822	# A little housekeeping on the scripts
	823	case $this_script in
	824	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
	825	*kernel) # if there is no kernel config file do not build the kernel
	826	[[ -z $CONFIG ]] && continue
	827	# Copy the config file to /sources with a standardized name
	828	cp $CONFIG $BUILDDIR/sources/kernel-config
	829	;;
	830	esac
	831	#
	832	# First append each name of the script files to a list (this will become
	833	# the names of the targets in the Makefile
	834	bootabletools="$bootabletools $this_script"
	835	#
	836	# Grab the name of the target, strip id number and misc words.
	837	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	838	case $this_script in
	839	kernel) name=linux
	840	;;
	841	esac
[a160d86]	842
	843	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	844
	845	#--------------------------------------------------------------------#
	846	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	847	#--------------------------------------------------------------------#
	848	#
	849	# Drop in the name of the target on a new line, and the previous target
	850	# as a dependency. Also call the echo_message function.
[041bc01]	851	wrt_target "${this_script}" "$PREV"
[877cc6a]	852	#
[a160d86]	853	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	854	# Insert instructions for unpacking the package and changing directories
	855	#
[a160d86]	856	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
[877cc6a]	857	#
	858	# Select a script execution method
	859	case $this_script in
	860	fstab) if [[ -n "$FSTAB" ]]; then
	861	wrt_copy_fstab "${this_script}"
	862	else
	863	wrt_run_as_chroot1 "${this_script}" "${file}"
	864	fi
	865	;;
	866	*) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
	867	esac
	868	#
	869	# Housekeeping...remove any build directory(ies) except if the package build fails.
[a160d86]	870	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
[877cc6a]	871	#
	872	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	873	wrt_touch
[877cc6a]	874	#
	875	#--------------------------------------------------------------------#
	876	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	877	#--------------------------------------------------------------------#
	878	#
	879	# Keep the script file name for Makefile dependencies.
	880	PREV=$this_script
	881
	882	done
	883
[453bef0]	884	# Add SBU-disk_usage report target if required
[401f81e]	885	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[453bef0]	886
[877cc6a]	887	}
	888
	889
	890
	891	#-----------------------------#
	892	bm_bootable_Makefiles() { #
	893	#-----------------------------#
	894	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable${R_arrow}"
	895
	896	for file in {bootable,the-end}/* ; do
	897	# Keep the script file name
	898	this_script=`basename $file`
	899
	900	# A little housekeeping on the scripts
	901	case $this_script in
	902	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
	903	*kernel) # if there is no kernel config file do not build the kernel
	904	[[ -z $CONFIG ]] && continue
	905	# Copy the named config file to /sources with a standardized name
	906	cp $CONFIG $BUILDDIR/sources/kernel-config
	907	;;
	908	esac
	909	#
	910	# First append each name of the script files to a list (this will become
	911	# the names of the targets in the Makefile
	912	bootabletools="$bootabletools $this_script"
	913	#
	914	# Grab the name of the target, strip id number and misc words.
	915	case $this_script in
[a160d86]	916	*kernel) name=linux ;;
[877cc6a]	917	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	918	esac
	919
[a160d86]	920	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	921
	922	#--------------------------------------------------------------------#
	923	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	924	#--------------------------------------------------------------------#
	925	#
	926	# Drop in the name of the target on a new line, and the previous target
	927	# as a dependency. Also call the echo_message function.
[7eb9402]	928	wrt_target_boot "${this_script}" "$PREV"
[877cc6a]	929	#
[a160d86]	930	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	931	# Insert instructions for unpacking the package and changing directories
	932	#
[a160d86]	933	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
[877cc6a]	934	#
	935	# Select a script execution method
	936	case $this_script in
	937	fstab) if [[ -n "$FSTAB" ]]; then
	938	# Minimal boot mode has no access to original file, store in /sources
	939	cp $FSTAB $BUILDDIR/sources/fstab
	940	wrt_copy_fstab2 "${this_script}"
	941	else
	942	wrt_run_as_root2 "${this_script}" "${file}"
	943	fi
	944	;;
	945	*) wrt_run_as_root2 "${this_script}" "${file}" ;;
	946	esac
	947	#
	948	# Housekeeping...remove any build directory(ies) except if the package build fails.
[a160d86]	949	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
[877cc6a]	950	#
	951	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	952	wrt_touch
[877cc6a]	953	#
	954	#--------------------------------------------------------------------#
	955	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	956	#--------------------------------------------------------------------#
	957	#
	958	# Keep the script file name for Makefile dependencies.
	959	PREV=$this_script
	960
	961	done
	962
[453bef0]	963	# Add SBU-disk_usage report target if required
[401f81e]	964	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[453bef0]	965
[877cc6a]	966	}
	967
	968
	969	#-----------------------------#
	970	build_Makefile() { # Construct a Makefile from the book scripts
	971	#-----------------------------#
	972	echo "Creating Makefile... ${BOLD}START${OFF}"
	973
	974	cd $JHALFSDIR/${PROGNAME}-commands
	975	# Start with a clean Makefile.tmp file
	976	>$MKFILE.tmp
	977
	978	host_prep_Makefiles
	979	cross_tools_Makefiles # $cross_tools
	980	temptools_Makefiles # $temptools
	981	if [[ $METHOD = "chroot" ]]; then
	982	chroot_Makefiles # $chroottools
	983	if [[ ! $TEST = "0" ]]; then
	984	testsuite_tools_Makefiles # $testsuitetools
	985	fi
	986	final_system_Makefiles # $basicsystem
[45f82718]	987	# Add the iterations targets, if needed
[401f81e]	988	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[877cc6a]	989	bootscripts_Makefiles # $bootscripttools
	990	bootable_Makefiles # $bootabletools
	991	else
	992	boot_Makefiles # $boottools
	993	if [[ ! $TEST = "0" ]]; then
	994	bm_testsuite_tools_Makefiles # $testsuitetools
	995	fi
	996	bm_final_system_Makefiles # $basicsystem
[45f82718]	997	# Add the iterations targets, if needed
[401f81e]	998	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[877cc6a]	999	bm_bootscripts_Makefiles # $bootscipttools
	1000	bm_bootable_Makefiles # $bootabletoosl
	1001	fi
	1002	# the_end_Makefiles
	1003
	1004
	1005	# Add a header, some variables and include the function file
	1006	# to the top of the real Makefile.
	1007	(
	1008	cat << EOF
	1009	$HEADER
	1010
[401f81e]	1011	SRC = /sources
	1012	MOUNT_PT = $BUILDDIR
	1013	PKG_LST = $PKG_LST
	1014	LUSER = $LUSER
	1015	LGROUP = $LGROUP
	1016	SCRIPT_ROOT = $SCRIPT_ROOT
	1017
	1018	BASEDIR = \$(MOUNT_PT)
	1019	SRCSDIR = \$(BASEDIR)/sources
	1020	CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands
	1021	LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs
	1022	TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs
	1023
	1024	crSRCSDIR = /sources
	1025	crCMDSDIR = /\$(SCRIPT_ROOT)/$PROGNAME-commands
	1026	crLOGDIR = /\$(SCRIPT_ROOT)/logs
	1027	crTESTLOGDIR = /\$(SCRIPT_ROOT)/test-logs
	1028
	1029	SU_LUSER = su - \$(LUSER) -c
	1030	LUSER_HOME = /home/\$(LUSER)
	1031	PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n"
	1032	PRT_DU_CR = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) \$(MOUNT_PT)\`\n"
	1033
[877cc6a]	1034
	1035	include makefile-functions
	1036
	1037	EOF
	1038	) > $MKFILE
	1039
	1040	# Add chroot commands
	1041	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1042	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	1043	chroot=`cat chroot/chroot \| \
	1044	sed -e "s@chroot@$CHROOT_LOC@" \
	1045	-e '/#!\/tools\/bin\/bash/d' \
	1046	-e '/^export/d' \
	1047	-e '/^logout/d' \
	1048	-e 's@ \\\@ @g' \| \
	1049	tr -d '\n' \| \
	1050	sed -e 's/ */ /g' \
	1051	-e 's\|\\$\|&&\|g' \
	1052	-e 's\|exit\|\|g' \
	1053	-e 's\|$\| -c\|' \
	1054	-e 's\|"$$CLFS"\|$(MOUNT_PT)\|'\
	1055	-e 's\|set -e\|\|'`
[877cc6a]	1056	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1057	fi
	1058
	1059	# Drop in the main target 'all:' and the chapter targets with each sub-target
	1060	# as a dependency.
	1061	if [[ "${METHOD}" = "chroot" ]]; then
	1062	(
	1063	cat << EOF
[7d9a82d]	1064	all: chapter2 chapter3 chapter4 chapter5 chapter6 chapter7 chapter8 do-housekeeping
[877cc6a]	1065	@\$(call echo_finished,$VERSION)
	1066
	1067	chapter2: 023-creatingtoolsdir 024-creatingcrossdir 025-addinguser 026-settingenvironment
	1068
	1069	chapter3: chapter2 $cross_tools
	1070
	1071	chapter4: chapter3 $temptools
	1072
[6ad5a2f]	1073	chapter5: chapter4 $chroottools restore-luser-env $testsuitetools
[877cc6a]	1074
	1075	chapter6: chapter5 $basicsystem
	1076
	1077	chapter7: chapter6 $bootscripttools
	1078
	1079	chapter8: chapter7 $bootabletools
	1080
	1081	clean-all: clean
	1082	rm -rf ./{clfs-commands,logs,Makefile,*.xsl,makefile-functions,packages,patches}
	1083
	1084	clean: clean-chapter4 clean-chapter3 clean-chapter2
	1085
[a160d86]	1086	restart:
	1087	@echo "This feature does not exist for the CLFS makefile. (yet)"
	1088
[877cc6a]	1089	clean-chapter2:
[6ad5a2f]	1090	-if [ ! -f luser-exist ]; then \\
	1091	userdel \$(LUSER); \\
	1092	rm -rf /home/\$(LUSER); \\
[877cc6a]	1093	fi;
	1094	rm -rf \$(MOUNT_PT)/tools
	1095	rm -f /tools
	1096	rm -rf \$(MOUNT_PT)/cross-tools
	1097	rm -f /cross-tools
[6ad5a2f]	1098	rm -f envars luser-exist
[877cc6a]	1099	rm -f 02* logs/02*.log
	1100
	1101	clean-chapter3:
	1102	rm -rf \$(MOUNT_PT)/tools/*
[6ad5a2f]	1103	rm -f $cross_tools sources-dir
[877cc6a]	1104	cd logs && rm -f $cross_tools && cd ..
	1105
	1106	clean-chapter4:
	1107	-umount \$(MOUNT_PT)/sys
	1108	-umount \$(MOUNT_PT)/proc
	1109	-umount \$(MOUNT_PT)/dev/shm
	1110	-umount \$(MOUNT_PT)/dev/pts
	1111	-umount \$(MOUNT_PT)/dev
	1112	rm -rf \$(MOUNT_PT)/{bin,boot,dev,etc,home,lib,lib64,media,mnt,opt,proc,root,sbin,srv,sys,tmp,usr,var}
	1113	rm -f $temptools
	1114	cd logs && rm -f $temptools && cd ..
	1115
	1116
[6ad5a2f]	1117	restore-luser-env:
[877cc6a]	1118	@\$(call echo_message, Building)
[6ad5a2f]	1119	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1120	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[877cc6a]	1121	fi;
[6ad5a2f]	1122	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1123	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[877cc6a]	1124	fi;
[6ad5a2f]	1125	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[93f38e7]	1126	touch \$@ && \\
	1127	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1128	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1129
[7d9a82d]	1130	do-housekeeping:
[4524fb2]	1131	@-umount \$(MOUNT_PT)/dev/pts
	1132	@-umount \$(MOUNT_PT)/dev/shm
	1133	@-umount \$(MOUNT_PT)/dev
	1134	@-umount \$(MOUNT_PT)/sys
	1135	@-umount \$(MOUNT_PT)/proc
[6ad5a2f]	1136	@-if [ ! -f luser-exist ]; then \\
	1137	userdel \$(LUSER); \\
	1138	rm -rf /home/\$(LUSER); \\
[7d9a82d]	1139	fi;
	1140
[877cc6a]	1141	EOF
	1142	) >> $MKFILE
	1143	fi
	1144
	1145
	1146	if [[ "${METHOD}" = "boot" ]]; then
	1147	(
	1148	cat << EOF
	1149
[041bc01]	1150	all: makeboot
[877cc6a]	1151
	1152	makeboot: 023-creatingtoolsdir 024-creatingcrossdir 025-addinguser 026-settingenvironment \
	1153	$cross_tools\
	1154	$temptools \
	1155	$chroottools \
[6ad5a2f]	1156	$boottools restore-luser-env
[877cc6a]	1157	@\$(call echo_boot_finished,$VERSION)
	1158
	1159	makesys: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1160	@\$(call echo_finished,$VERSION)
	1161
	1162
	1163	clean-all: clean
	1164	rm -rf ./{clfs-commands,logs,Makefile,*.xsl,makefile-functions,packages,patches}
	1165
	1166	clean: clean-makesys clean-makeboot clean-jhalfs
	1167
[a160d86]	1168	restart:
	1169	@echo "This feature does not exist for the CLFS makefile. (yet)"
	1170
[877cc6a]	1171	clean-jhalfs:
[6ad5a2f]	1172	-if [ ! -f luser-exist ]; then \\
	1173	userdel \$(LUSER); \\
	1174	rm -rf /home/\$(LUSER); \\
[877cc6a]	1175	fi;
	1176	rm -rf \$(MOUNT_PT)/tools
	1177	rm -f /tools
	1178	rm -rf \$(MOUNT_PT)/cross-tools
	1179	rm -f /cross-tools
[6ad5a2f]	1180	rm -f envars luser-exist
[877cc6a]	1181	rm -f 02* logs/02*.log
	1182
	1183	clean-makeboot:
	1184	rm -rf /tools/*
	1185	rm -f $cross_tools && rm -f $temptools && rm -f $chroottools && rm -f $boottools
[6ad5a2f]	1186	rm -f restore-luser-env sources-dir
[877cc6a]	1187	cd logs && rm -f $cross_tools && rm -f $temptools && rm -f $chroottools && rm -f $boottools && cd ..
	1188
	1189	clean-makesys:
	1190	-umount \$(MOUNT_PT)/sys
	1191	-umount \$(MOUNT_PT)/proc
	1192	-umount \$(MOUNT_PT)/dev/shm
	1193	-umount \$(MOUNT_PT)/dev/pts
	1194	-umount \$(MOUNT_PT)/dev
	1195	rm -rf \$(MOUNT_PT)/{bin,boot,dev,etc,home,lib,lib64,media,mnt,opt,proc,root,sbin,srv,sys,tmp,usr,var}
	1196	rm -f $basicsystem
	1197	rm -f $bootscripttools
	1198	rm -f $bootabletools
	1199	cd logs && rm -f $basicsystem && rm -f $bootscripttools && rm -f $bootabletools && cd ..
	1200
	1201
[6ad5a2f]	1202	restore-luser-env:
[877cc6a]	1203	@\$(call echo_message, Building)
[6ad5a2f]	1204	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1205	mv -fv /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[877cc6a]	1206	fi;
[6ad5a2f]	1207	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1208	mv -v /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[877cc6a]	1209	fi;
[6ad5a2f]	1210	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[93f38e7]	1211	touch \$@ && \\
	1212	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1213	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1214
[7d9a82d]	1215
[877cc6a]	1216	EOF
	1217	) >> $MKFILE
	1218	fi
	1219
	1220	# Bring over the items from the Makefile.tmp
	1221	cat $MKFILE.tmp >> $MKFILE
	1222	rm $MKFILE.tmp
	1223	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	1224
	1225	}
	1226

Note: See TracBrowser for help on using the repository browser.

Download in other formats: