Context Navigation

source: CLFS/master.sh@ 78d4779

2.4 ablfs-more legacy trunk

Last change on this file since 78d4779 was 5f154f1, checked in by Pierre Labastie <pierre@…>, 9 years ago
Add instructions to unset PKG_CONFIG_PATH in CLFS? masters, because some distros set this variable and it causes some trouble. Thanks to W. Harrington for the patch.
Property mode set to `100644`
File size: 43.2 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[269d81c]	21	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[269d81c]	28	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	38	mkdir -pv \$(LUSER_HOME); \\
	39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	40	else \\
[269d81c]	41	touch luser-exist; \\
	42	fi
	43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	46	chmod a+wt \$(SRCSDIR)
	47	@\$(call housekeeping)
[877cc6a]	48
	49	026-settingenvironment: 025-addinguser
	50	@\$(call echo_message, Building)
[962793a]	51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	53	fi
[962793a]	54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	56	fi;
[962793a]	57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
[5f154f1]	66	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
[962793a]	67	echo "" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	68	EOF
	69	) >> $MKFILE.tmp
	70	if ! [ -e final-preps/*variables ]; then
	71	(
	72	cat << EOF
[962793a]	73	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	74	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	75	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	76	EOF
	77	) >> $MKFILE.tmp
	78	fi
	79	(
	80	cat << EOF
[962793a]	81	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	82	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	83	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	84	if [ -d \$(MOUNT_PT)/var ]; then \\
	85	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	86	fi && \\
[877cc6a]	87	touch envars && \\
[e18f80a]	88	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	89	@\$(call housekeeping)
[877cc6a]	90	EOF
	91	) >> $MKFILE.tmp
[045b2dc]	92	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	93
	94	}
	95
[3f83cb0]	96	#--------------------------------------#
	97	final_preps_Makefiles() {
	98	#--------------------------------------#
	99	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
	100	for file in final-preps/* ; do
	101	this_script=`basename $file`
	102	case $this_script in
	103	*variables )
	104	;;
	105	*) continue; ;;
	106	esac
	107	# Set the dependency for the first target.
	108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	109
	110	# First append each name of the script files to a list (this will become
	111	# the names of the targets in the Makefile
	112	final_preps="$final_preps $this_script"
	113
	114	# No need to grab the package name
	115
	116	LUSER_wrt_target "${this_script}" "$PREV"
	117	LUSER_wrt_RunAsUser "${file}"
	118	wrt_touch
	119	PREV=$this_script
	120	done # for file in ....
	121	}
	122
[045b2dc]	123	#--------------------------------------#
	124	cross_tools_Makefiles() { #
	125	#--------------------------------------#
	126	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	127
	128	for file in cross-tools/* ; do
	129	# Keep the script file name
	130	this_script=`basename $file`
	131	#
	132	# Skip this script...
	133	case $this_script in
	134	cflags \| variables ) # work done in host_prep_Makefiles
	135	continue; ;;
	136	*) ;;
	137	esac
	138	#
	139	# Set the dependency for the first target.
	140	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	141
	142	# First append each name of the script files to a list (this will become
	143	# the names of the targets in the Makefile
	144	cross_tools="$cross_tools $this_script"
	145
	146	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	147	# and binutils in chapter 5)
	148	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	149	-e 's@-static@@' \
	150	-e 's@-final@@' \
[480295c]	151	-e 's@-64@@' \
[82808d1]	152	-e 's@-n32@@' \
	153	-e 's@-pass1@@'`
[a160d86]	154	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	155
	156	#--------------------------------------------------------------------#
	157	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	158	#--------------------------------------------------------------------#
	159	#
	160	# Drop in the name of the target on a new line, and the previous target
	161	# as a dependency. Also call the echo_message function.
[045b2dc]	162	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	163	#
[a160d86]	164	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	165	#
[045b2dc]	166	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	167	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	168	#
[045b2dc]	169	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	170	#
[045b2dc]	171	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	172	#
	173	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	174	wrt_touch
[877cc6a]	175	#
	176	#--------------------------------------------------------------------#
	177	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	178	#--------------------------------------------------------------------#
	179	#
	180	# Keep the script file name for Makefile dependencies.
	181	PREV=$this_script
	182
	183	done # for file in ....
	184	}
	185
[045b2dc]	186	#--------------------------------------#
	187	temptools_Makefiles() { #
	188	#--------------------------------------#
	189	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	190
	191	for file in temp-system/* ; do
	192	# Keep the script file name
	193	this_script=`basename $file`
[6f2cd96]	194	#
	195	# Deal with any odd scripts..
	196	case $this_script in
	197	*choose) # The choose script will fail if you cannot enter the new environment
	198	# If the 'boot' build method was chosen don't run the script
	199	[[ $METHOD = "boot" ]] && continue; ;;
	200	*) ;;
	201	esac
[e2ec07a]	202
[877cc6a]	203	#
	204	# First append each name of the script files to a list (this will become
	205	# the names of the targets in the Makefile
	206	temptools="$temptools $this_script"
	207
	208	#
	209	# Grab the name of the target, strip id number, XXX-script
	210	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	211	#
[a160d86]	212	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	213
	214	#--------------------------------------------------------------------#
	215	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	216	#--------------------------------------------------------------------#
	217	#
	218	# Drop in the name of the target on a new line, and the previous target
	219	# as a dependency. Also call the echo_message function.
[045b2dc]	220	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	221	#
[a160d86]	222	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	223	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	224	#
[045b2dc]	225	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	226	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	227	#
[045b2dc]	228	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	229	#
[045b2dc]	230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	231	#
	232	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	233	wrt_touch
[877cc6a]	234	#
	235	#--------------------------------------------------------------------#
	236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	237	#--------------------------------------------------------------------#
	238	#
	239	# Keep the script file name for Makefile dependencies.
	240	PREV=$this_script
	241	done # for file in ....
	242	}
	243
	244
[045b2dc]	245	#--------------------------------------#
	246	chroot_Makefiles() { #
	247	#--------------------------------------#
	248	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	249
[045b2dc]	250	for file in chroot/* ; do
[877cc6a]	251	# Keep the script file name
	252	this_script=`basename $file`
[045b2dc]	253	#
	254	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	255	case $this_script in
[045b2dc]	256	chroot) continue ;;
[877cc6a]	257	esac
[045b2dc]	258
[877cc6a]	259	#
	260	# First append each name of the script files to a list (this will become
	261	# the names of the targets in the Makefile
[045b2dc]	262	case "${this_script}" in
	263	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	264	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	265	esac
[045b2dc]	266
	267	# Grab the name of the target, strip id number, XXX-script
	268	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	269
[a160d86]	270	pkg_tarball=$(get_package_tarball_name $name)
	271
[045b2dc]	272	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	273	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	274	# .. Customized makefile entry
	275	case "${this_script}" in
	276	*util-linux)
	277	LUSER_wrt_target "${this_script}" "$PREV"
	278	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	279	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	280	LUSER_wrt_RunAsUser "${file}"
	281	LUSER_RemoveBuildDirs "${name}"
	282	wrt_touch
[480295c]	283	temptools="$temptools $this_script"
	284	continue ;;
[608fbe1]	285	*util-linux-ng)
	286	LUSER_wrt_target "${this_script}" "$PREV"
	287	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	288	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	289	LUSER_wrt_RunAsUser "${file}"
	290	LUSER_RemoveBuildDirs "${name}"
	291	wrt_touch
	292	temptools="$temptools $this_script"
	293	continue ;;
	294	*util-linux-libs)
	295	LUSER_wrt_target "${this_script}" "$PREV"
	296	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	297	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	298	LUSER_wrt_RunAsUser "${file}"
	299	LUSER_RemoveBuildDirs "${name}"
	300	wrt_touch
	301	temptools="$temptools $this_script"
	302	continue ;;
	303	*e2fsprogs)
	304	LUSER_wrt_target "${this_script}" "$PREV"
	305	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	306	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	307	LUSER_wrt_RunAsUser "${file}"
	308	LUSER_RemoveBuildDirs "${name}"
	309	wrt_touch
	310	temptools="$temptools $this_script"
	311	continue ;;
	312	*e2fsprogs-libs)
	313	LUSER_wrt_target "${this_script}" "$PREV"
	314	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	315	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	316	LUSER_wrt_RunAsUser "${file}"
	317	LUSER_RemoveBuildDirs "${name}"
	318	wrt_touch
	319	temptools="$temptools $this_script"
	320	continue ;;
[045b2dc]	321	esac
	322
	323
[877cc6a]	324	#--------------------------------------------------------------------#
	325	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	326	#--------------------------------------------------------------------#
	327	#
	328	# Drop in the name of the target on a new line, and the previous target
	329	# as a dependency. Also call the echo_message function.
[045b2dc]	330	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	331	#
[a160d86]	332	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	333	# Insert instructions for unpacking the package and changing directories
	334	#
[045b2dc]	335	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	336	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	337	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	338	fi
[877cc6a]	339	#
	340	# Select a script execution method
	341	case $this_script in
[8f2c086]	342	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	343	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	344	esac
	345	#
[045b2dc]	346	# Housekeeping...remove the build directory(ies), except if the package build fails.
	347	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	348	#
	349	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	350	wrt_touch
[877cc6a]	351	#
	352	#--------------------------------------------------------------------#
	353	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	354	#--------------------------------------------------------------------#
	355	#
	356	# Keep the script file name for Makefile dependencies.
	357	PREV=$this_script
	358
[045b2dc]	359	done # for file in...
[877cc6a]	360	}
	361
	362
[045b2dc]	363	#--------------------------------------#
	364	boot_Makefiles() { #
	365	#--------------------------------------#
[877cc6a]	366
[045b2dc]	367	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	368	#
	369	# Create a target bootable partition containing a compile environment. Later
	370	# on we boot into this environment and contine the build.
	371	#
	372	for file in boot/* ; do
[877cc6a]	373	# Keep the script file name
	374	this_script=`basename $file`
[045b2dc]	375
	376	# A little housekeeping on the scripts
[877cc6a]	377	case $this_script in
[f940c29]	378	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	379	how-to-view) continue ;;
[045b2dc]	380	whatnext) continue ;;
	381	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	382	*kernel) # if there is no kernel config file do not build the kernel
	383	[[ -z $CONFIG ]] && continue
	384	# Copy the config file to /sources with a standardized name
	385	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	386	;;
[877cc6a]	387	esac
	388	#
	389	# First append each name of the script files to a list (this will become
[179ae85]	390	# the names of the targets in the Makefile). Those names differ depending
	391	# on the version of the book. What makes the difference between those
	392	# versions is the presence of "how-to-view" in the boot chapter.
	393	if [ -f boot/*how-to-view ]; then
	394	case "${this_script}" in
	395	*changingowner)
	396	orphan_scripts="${orphan_scripts} ${this_script}"
	397	;;
	398	*creatingdirs)
	399	orphan_scripts="${orphan_scripts} ${this_script}"
	400	;;
	401	*createfiles)
	402	orphan_scripts="${orphan_scripts} ${this_script}"
	403	;;
	404	*devices)
	405	orphan_scripts="${orphan_scripts} ${this_script}"
	406	;;
	407	*flags)
	408	orphan_scripts="${orphan_scripts} ${this_script}"
	409	;;
	410	*fstab)
	411	orphan_scripts="${orphan_scripts} ${this_script}"
	412	;;
	413	*pwdgroup)
	414	orphan_scripts="${orphan_scripts} ${this_script}"
	415	;;
	416	*settingenvironment)
	417	orphan_scripts="${orphan_scripts} ${this_script}"
	418	;;
	419	*)
	420	boottools="$boottools $this_script"
	421	;;
	422	esac
	423	else
	424	case "${this_script}" in
	425	*changingowner)
	426	orphan_scripts="${orphan_scripts} ${this_script}"
	427	;;
	428	*devices)
	429	orphan_scripts="${orphan_scripts} ${this_script}"
	430	;;
	431	*)
	432	boottools="$boottools $this_script"
	433	;;
	434	esac
	435	fi
[045b2dc]	436	#
	437	# Grab the name of the target, strip id number and misc words.
	438	case $this_script in
[179ae85]	439	*kernel) name=linux ;;
	440	*bootscripts) name="bootscripts-cross-lfs" ;;
	441	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	442	*udev-rules) name="udev-cross-lfs" ;;
	443	*grub-build) name=grub ;;
	444	*-aboot-build) name=aboot ;;
	445	*yaboot-build) name=yaboot ;;
	446	*colo-build) name=colo ;;
	447	*silo-build) name=silo ;;
	448	*arcload-build) name=arcload ;;
	449	*lilo-build) name=lilo ;;
[045b2dc]	450	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	451	esac
	452	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	453	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	454
	455	#--------------------------------------------------------------------#
	456	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	457	#--------------------------------------------------------------------#
	458	#
	459	# Drop in the name of the target on a new line, and the previous target
	460	# as a dependency. Also call the echo_message function.
[045b2dc]	461	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	462	#
[a160d86]	463	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	464	# Insert instructions for unpacking the package and changing directories
	465	#
[045b2dc]	466	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	467	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	468	#
	469	# Select a script execution method
[179ae85]	470	if [ -f boot/*how-to-view ]; then
	471	case $this_script in
	472	# The following 8 scripts are defined in the /boot directory but need
	473	# to be run as a root user. Set them up here but run them in another
	474	# phase
	475	*changingowner) wrt_RunAsRoot "${file}" ;;
	476	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	477	*createfiles) wrt_RunAsRoot "${file}" ;;
	478	*devices) wrt_RunAsRoot "${file}" ;;
	479	*flags) wrt_RunAsRoot "${file}" ;;
	480	*fstab)
	481	if [[ -n "$FSTAB" ]]; then
	482	LUSER_wrt_CopyFstab
	483	else
	484	wrt_RunAsRoot "${file}"
	485	fi
	486	;;
	487	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	488	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	489	*) LUSER_wrt_RunAsUser "${file}" ;;
	490	esac
	491	else
	492	case $this_script in
	493	# The following 2 scripts are defined in the /boot directory but need
	494	# to be run as a root user. Set them up here but run them in another
	495	# phase
	496	*changingowner) wrt_RunAsRoot "${file}" ;;
	497	*devices) wrt_RunAsRoot "${file}" ;;
	498	*fstab)
	499	if [[ -n "$FSTAB" ]]; then
	500	LUSER_wrt_CopyFstab
	501	else
	502	LUSER_wrt_RunAsUser "${file}"
	503	fi
	504	;;
	505	*) LUSER_wrt_RunAsUser "${file}" ;;
	506	esac
	507	fi
[877cc6a]	508	#
[045b2dc]	509	# Housekeeping...remove any build directory(ies) except if the package build fails.
	510	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	511	#
	512	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	513	wrt_touch
[877cc6a]	514	#
	515	#--------------------------------------------------------------------#
	516	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	517	#--------------------------------------------------------------------#
	518	#
	519	# Keep the script file name for Makefile dependencies.
	520	PREV=$this_script
	521
[045b2dc]	522	done
[877cc6a]	523	}
	524
	525
[045b2dc]	526	#--------------------------------------#
[d55a1a1]	527	testsuite_tools_Makefiles() { #
[045b2dc]	528	#--------------------------------------#
[877cc6a]	529
[d55a1a1]	530	if [[ "${METHOD}" = "chroot" ]]; then
	531	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	532	else
	533	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	534	PREV=""
[d55a1a1]	535	fi
[877cc6a]	536
	537	for file in testsuite-tools/* ; do
	538	# Keep the script file name
	539	this_script=`basename $file`
	540
	541	# First append each name of the script files to a list (this will become
	542	# the names of the targets in the Makefile
	543	testsuitetools="$testsuitetools $this_script"
	544
	545	# Grab the name of the target, strip id number, XXX-script
	546	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	547	-e 's@-64bit@@' \
	548	-e 's@-64@@' \
	549	-e 's@64@@' \
	550	-e 's@n32@@'`
	551
[a160d86]	552	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	553
	554	#--------------------------------------------------------------------#
	555	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	556	#--------------------------------------------------------------------#
	557	#
	558	# Drop in the name of the target on a new line, and the previous target
	559	# as a dependency. Also call the echo_message function.
[ca6b261]	560	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	561	#
[ca6b261]	562	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	563	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	564	#
[ca6b261]	565	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	566	#
[ca6b261]	567	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	568	#
	569	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	570	wrt_touch
[877cc6a]	571	#
	572	#--------------------------------------------------------------------#
	573	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	574	#--------------------------------------------------------------------#
	575	#
	576	# Keep the script file name for Makefile dependencies.
	577	PREV=$this_script
	578
	579	done
	580	}
	581
	582
[045b2dc]	583	#--------------------------------------#
[d55a1a1]	584	final_system_Makefiles() { #
[045b2dc]	585	#--------------------------------------#
[45f82718]	586	# Set envars and scripts for iteration targets
	587	if [[ -z "$1" ]] ; then
	588	local N=""
[d55a1a1]	589	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	590	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	591	else
	592	local N=-build_$1
	593	local basicsystem=""
	594	mkdir final-system$N
	595	cp final-system/* final-system$N
	596	for script in final-system$N/* ; do
	597	# Overwrite existing symlinks, files, and dirs
	598	sed -e 's/ln -sv/&f/g' \
	599	-e 's/mv -v/&f/g' \
	600	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	601	# Rename the scripts
	602	mv ${script} ${script}$N
[45f82718]	603	done
[a5f52ba]	604	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	605	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	606	# Delete *old Readline libraries just after make install
[10c8b78]	607	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	608	fi
	609
[d55a1a1]	610	if [[ "${METHOD}" = "chroot" ]]; then
	611	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	612	else
	613	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	614	fi
[877cc6a]	615
[45f82718]	616	for file in final-system$N/* ; do
[877cc6a]	617	# Keep the script file name
	618	this_script=`basename $file`
	619
[45f82718]	620	# Test if the stripping phase must be skipped.
[4384929]	621	# Skip also temp-perl for iterative runs
[877cc6a]	622	case $this_script in
[401f81e]	623	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	624	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	625	esac
	626
[4384929]	627	# Grab the name of the target, strip id number, XXX-script.
	628	# name1 is partially stripped and should be used for logging files.
	629	# name is completely stripped and is used for grabbing
	630	# the package name.
	631	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	632	-e 's,'$N',,'`
	633	name=`echo $name1 \| sed -e 's@temp-@@' \
	634	-e 's@-64bit@@' \
	635	-e 's@-64@@' \
	636	-e 's@64@@' \
	637	-e 's@n32@@'`
[877cc6a]	638
[45f82718]	639	# Find the version of the command files, if it corresponds with the building of
	640	# a specific package. We need this here to can skip scripts not needed for
	641	# iterations rebuilds
[a160d86]	642	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	643
[a160d86]	644	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	645	case "${this_script}" in
	646	stripping) ;;
	647	*) continue ;;
	648	esac
	649	fi
	650
	651	# Append each name of the script files to a list (this will become
	652	# the names of the targets in the Makefile
[10c8b78]	653	basicsystem="$basicsystem ${this_script}"
[45f82718]	654
[877cc6a]	655	#--------------------------------------------------------------------#
	656	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	657	#--------------------------------------------------------------------#
	658	#
	659	# Drop in the name of the target on a new line, and the previous target
	660	# as a dependency. Also call the echo_message function.
[10c8b78]	661	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	662
[a160d86]	663	# If $pkg_tarball isn't empty, we've got a package...
	664	if [ "$pkg_tarball" != "" ] ; then
[f546320]	665	# Touch timestamp file if installed files logs will be created.
	666	# But only for the firt build when running iterative builds.
	667	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	668	CHROOT_wrt_TouchTimestamp
	669	fi
[045b2dc]	670	CHROOT_Unpack "$pkg_tarball"
[a229600]	671	# If the testsuites must be run, initialize the log file
	672	case $name in
[269d81c]	673	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	674	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	675	;;
	676	* )
[10c8b78]	677	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	678	;;
	679	esac
	680	# If using optimizations, write the instructions
[1b65a84]	681	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	682	fi
	683	#
[045b2dc]	684	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	685	#
[f546320]	686	# Write installed files log and remove the build directory(ies)
	687	# except if the package build fails.
	688	if [ "$pkg_tarball" != "" ] ; then
	689	CHROOT_wrt_RemoveBuildDirs "$name"
	690	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	691	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	692	fi
	693	fi
[877cc6a]	694	#
[f546320]	695	# Include a touch of the target name so make can check
	696	# if it's already been made.
[93f38e7]	697	wrt_touch
[877cc6a]	698	#
	699	#--------------------------------------------------------------------#
	700	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	701	#--------------------------------------------------------------------#
	702	#
	703	# Keep the script file name for Makefile dependencies.
[10c8b78]	704	PREV=${this_script}
[45f82718]	705	# Set system_build envar for iteration targets
	706	system_build=$basicsystem
[877cc6a]	707	done # for file in final-system/* ...
	708	}
	709
[045b2dc]	710	#--------------------------------------#
[d55a1a1]	711	bootscripts_Makefiles() { #
[045b2dc]	712	#--------------------------------------#
[d55a1a1]	713
[c6ee8ea]	714	# New versions of the book do not have bootscripts anymore
	715	# (use systemd configuration files)
	716	# Define a variable to be used for the right script directory to parse
	717	if [ -d bootscripts ]; then
	718	config="bootscripts"
	719	else
	720	config="system-config"
	721	fi
	722
[d55a1a1]	723	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	724	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	725	else
[c6ee8ea]	726	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	727	fi
[877cc6a]	728
[c6ee8ea]	729	for file in $config/* ; do
[877cc6a]	730	# Keep the script file name
	731	this_script=`basename $file`
	732
	733	case $this_script in
	734	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	735	console) continue ;; # Use the files that came with the bootscripts
[f0de954]	736	# fstab is now here (for 3.x.y)
	737	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	738	*) ;;
	739	esac
	740
	741	# First append each name of the script files to a list (this will become
	742	# the names of the targets in the Makefile
	743	bootscripttools="$bootscripttools $this_script"
	744
[4384929]	745	# Grab the name of the target, strip id number, XXX-script.
	746	# name1 is partially stripped and should be used for logging files.
	747	# name is completely stripped and is used for grabbing
	748	# the package name.
	749	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	750	name=`echo $name1 \| sed -e 's@-64bit@@' \
	751	-e 's@-64@@' \
	752	-e 's@64@@' \
	753	-e 's@n32@@'`
[877cc6a]	754	case $name in
[c044e3c]	755	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	756	*udev-rules) name=udev-cross-lfs ;;
	757	esac
[c044e3c]	758
[a160d86]	759	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	760
	761	#--------------------------------------------------------------------#
	762	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	763	#--------------------------------------------------------------------#
	764	#
	765	# Drop in the name of the target on a new line, and the previous target
	766	# as a dependency. Also call the echo_message function.
[045b2dc]	767	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	768	#
[a160d86]	769	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	770	#
[f546320]	771	if [ "$pkg_tarball" != "" ] ; then
	772	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	773	CHROOT_wrt_TouchTimestamp
[f546320]	774	fi
	775	CHROOT_Unpack "$pkg_tarball"
	776	fi
[877cc6a]	777	#
[f0de954]	778	case $this_script in
	779	fstab) if [[ -n "$FSTAB" ]]; then
	780	CHROOT_wrt_CopyFstab
	781	else
	782	CHROOT_wrt_RunAsRoot "${file}"
	783	fi
	784	;;
	785	*) CHROOT_wrt_RunAsRoot "${file}"
	786	;;
	787	esac
[877cc6a]	788	#
[f546320]	789	# Write installed files log and remove the build directory(ies)
	790	# except if the package build fails.
	791	if [ "$pkg_tarball" != "" ] ; then
	792	CHROOT_wrt_RemoveBuildDirs "$name"
	793	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	794	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	795	fi
	796	fi
[877cc6a]	797	#
	798	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	799	wrt_touch
[877cc6a]	800	#
	801	#--------------------------------------------------------------------#
	802	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	803	#--------------------------------------------------------------------#
	804	#
	805	# Keep the script file name for Makefile dependencies.
	806	PREV=$this_script
	807
	808	done # for file in bootscripts/* ...
	809	}
	810
[608fbe1]	811	#--------------------------------------#
	812	network_Makefiles() { #
	813	#--------------------------------------#
	814
	815	if [[ "${METHOD}" = "chroot" ]]; then
	816	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	817	else
	818	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	819	fi
	820
	821	for file in network/* ; do
	822	# Keep the script file name
	823	this_script=`basename $file`
	824
	825	case $this_script in
	826	*choose) continue ;; # This is not a script but a commentary.
	827	*dhcp) continue ;; # Assume static networking.
	828	*dhcpcd) continue ;; # Assume static networking.
	829	*) ;;
	830	esac
	831
	832	# First append each name of the script files to a list (this will become
	833	# the names of the targets in the Makefile
	834	networktools="$networktools $this_script"
	835
	836	# Grab the name of the target, strip id number, XXX-script
[4384929]	837	# name1 is partially stripped and should be used for logging files.
	838	# name is completely stripped and is used for grabbing
	839	# the package name.
	840	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	841	name=`echo $name1 \| sed -e 's@-64bit@@' \
	842	-e 's@-64@@' \
	843	-e 's@64@@' \
	844	-e 's@n32@@'`
[608fbe1]	845	case $name in
[b4df9e1]	846	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	847	esac
	848
	849	pkg_tarball=$(get_package_tarball_name $name)
	850
	851	#--------------------------------------------------------------------#
	852	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	853	#--------------------------------------------------------------------#
	854	#
	855	# Drop in the name of the target on a new line, and the previous target
	856	# as a dependency. Also call the echo_message function.
	857	CHROOT_wrt_target "${this_script}" "$PREV"
	858	#
	859	# If $pkg_tarball isn't empty, we've got a package...
	860	#
	861	if [ "$pkg_tarball" != "" ] ; then
	862	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	863	CHROOT_wrt_TouchTimestamp
[608fbe1]	864	fi
	865	CHROOT_Unpack "$pkg_tarball"
	866	fi
	867	#
	868	CHROOT_wrt_RunAsRoot "${file}"
	869	#
	870	# Write installed files log and remove the build directory(ies)
	871	# except if the package build fails.
	872	if [ "$pkg_tarball" != "" ] ; then
	873	CHROOT_wrt_RemoveBuildDirs "$name"
	874	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	875	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	876	fi
	877	fi
	878	#
	879	# Include a touch of the target name so make can check if it's already been made.
	880	wrt_touch
	881	#
	882	#--------------------------------------------------------------------#
	883	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	884	#--------------------------------------------------------------------#
	885	#
	886	# Keep the script file name for Makefile dependencies.
	887	PREV=$this_script
	888
	889	done # for file in network/* ...
	890	}
	891
[045b2dc]	892	#--------------------------------------#
[d55a1a1]	893	bootable_Makefiles() { #
[045b2dc]	894	#--------------------------------------#
[877cc6a]	895
[d55a1a1]	896	if [[ "${METHOD}" = "chroot" ]]; then
	897	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	898	else
	899	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	900	fi
[877cc6a]	901
	902
[936efa8]	903	for file in bootable/* ; do
[877cc6a]	904	# Keep the script file name
	905	this_script=`basename $file`
	906
	907	# A little housekeeping on the scripts
	908	case $this_script in
	909	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	910	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	911	*kernel) # if there is no kernel config file do not build the kernel
	912	[[ -z $CONFIG ]] && continue
	913	# Copy the config file to /sources with a standardized name
	914	cp $CONFIG $BUILDDIR/sources/kernel-config
	915	;;
	916	esac
	917	#
	918	# First append each name of the script files to a list (this will become
	919	# the names of the targets in the Makefile
	920	bootabletools="$bootabletools $this_script"
	921	#
	922	# Grab the name of the target, strip id number and misc words.
	923	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	924	case $this_script in
	925	kernel) name=linux
	926	;;
	927	esac
[a160d86]	928
	929	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	930
	931	#--------------------------------------------------------------------#
	932	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	933	#--------------------------------------------------------------------#
	934	#
	935	# Drop in the name of the target on a new line, and the previous target
	936	# as a dependency. Also call the echo_message function.
[045b2dc]	937	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	938	#
[a160d86]	939	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	940	# Insert instructions for unpacking the package and changing directories
	941	#
[f546320]	942	if [ "$pkg_tarball" != "" ] ; then
	943	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	944	CHROOT_wrt_TouchTimestamp
[f546320]	945	fi
	946	CHROOT_Unpack "$pkg_tarball"
	947	fi
[877cc6a]	948	#
	949	# Select a script execution method
	950	case $this_script in
[045b2dc]	951	fstab) if [[ -n "$FSTAB" ]]; then
	952	CHROOT_wrt_CopyFstab
	953	else
	954	CHROOT_wrt_RunAsRoot "${file}"
	955	fi
	956	;;
	957	*) CHROOT_wrt_RunAsRoot "${file}"
	958	;;
[877cc6a]	959	esac
	960	#
[f546320]	961	# Write installed files log and remove the build directory(ies)
	962	# except if the package build fails.
	963	if [ "$pkg_tarball" != "" ] ; then
	964	CHROOT_wrt_RemoveBuildDirs "$name"
	965	if [ "${INSTALL_LOG}" = "y" ] ; then
	966	CHROOT_wrt_LogNewFiles "$name"
	967	fi
	968	fi
[877cc6a]	969	#
	970	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	971	wrt_touch
[877cc6a]	972	#
	973	#--------------------------------------------------------------------#
	974	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	975	#--------------------------------------------------------------------#
	976	#
	977	# Keep the script file name for Makefile dependencies.
	978	PREV=$this_script
	979
	980	done
	981
	982	}
	983
	984
[045b2dc]	985	#--------------------------------------#
	986	build_Makefile() { # Construct a Makefile from the book scripts
	987	#--------------------------------------#
	988
	989	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	990
	991	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	992	# Start with clean files
[045b2dc]	993	>$MKFILE
[877cc6a]	994	>$MKFILE.tmp
	995
[d55a1a1]	996	method_cmds=${METHOD}_Makefiles
[045b2dc]	997
	998	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
[3f83cb0]	999	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
[045b2dc]	1000	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1001	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1002	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1003	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	1004	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	1005	fi
[d55a1a1]	1006	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	1007	# Add the iterations targets, if needed
	1008	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	1009	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[608fbe1]	1010	if [ -d network ]; then
	1011	network_Makefiles # If present, process network setup.
	1012	fi
[d55a1a1]	1013	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	1014
[3e7ceed]	1015	# Add the CUSTOM_TOOLS targets, if needed
	1016	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	1017
[877cc6a]	1018	# Add a header, some variables and include the function file
	1019	# to the top of the real Makefile.
[195ed9f]	1020	wrt_Makefile_header
[877cc6a]	1021
	1022	# Add chroot commands
	1023	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1024	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	1025	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	1026	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	1027	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	1028	-e '/^export/d' \
	1029	-e '/^logout/d' \
	1030	-e 's@ \\\@ @g' \| \
	1031	tr -d '\n' \| \
	1032	sed -e 's/ */ /g' \
	1033	-e 's\|\\$\|&&\|g' \
	1034	-e 's\|exit\|\|g' \
	1035	-e 's\|$\| -c\|' \
[f4d9a48]	1036	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	1037	-e 's\|set -e\|\|' \
	1038	-e 's\|set +h\|\|'`
[877cc6a]	1039	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1040	fi
	1041
[045b2dc]	1042	################## CHROOT ####################
	1043
[877cc6a]	1044	if [[ "${METHOD}" = "chroot" ]]; then
	1045	(
[045b2dc]	1046	cat << EOF
[877cc6a]	1047
[3f83cb0]	1048	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	1049	@sudo make do-housekeeping
[936efa8]	1050	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1051	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1052	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1053	@\$(call echo_finished,$VERSION)
[a160d86]	1054
[045b2dc]	1055	ck_UID:
	1056	@if [ \`id -u\` = "0" ]; then \\
	1057	echo "+--------------------------------------------------+"; \\
	1058	echo "\|You cannot run this makefile from the root account\|"; \\
	1059	echo "+--------------------------------------------------+"; \\
	1060	exit 1; \\
	1061	fi
	1062
	1063	#---------------AS ROOT
	1064	mk_SETUP:
	1065	@\$(call echo_SU_request)
[7a43320]	1066	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1067	@touch \$@
	1068
	1069	#---------------AS LUSER
[3f83cb0]	1070	mk_F_PREPS: mk_SETUP
	1071	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
[730436a]	1072	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1073	@sudo make restore-luser-env
	1074	@touch \$@
	1075
[3f83cb0]	1076	mk_SUDO: mk_F_PREPS
[7a43320]	1077	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1078	@touch \$@
	1079
	1080	#---------------CHROOT JAIL
	1081	mk_SYSTOOLS: mk_SUDO
	1082	@\$(call echo_CHROOT_request)
	1083	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1084	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1085	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1086	@touch \$@
[877cc6a]	1087
[269d81c]	1088	mk_BLFS_TOOL: create-sbu_du-report
	1089	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1090	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1091	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1092	fi;
	1093	@touch \$@
	1094
	1095	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1096	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1097	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1098	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1099	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1100	fi;
	1101	@touch \$@
	1102
[6c1b96b]	1103	SETUP: $host_prep
[3f83cb0]	1104	AS_LUSER: $final_preps $cross_tools $temptools
[6c1b96b]	1105	SUDO: $orphan_scripts
	1106	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1107	PREP_CHROOT_JAIL: ${chroottools}
	1108	CHROOT_JAIL: SHELL=/tools/bin/bash
	1109	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1110	CUSTOM_TOOLS: $custom_list
[877cc6a]	1111
[1838bc7]	1112
	1113	create-sbu_du-report: mk_SYSTOOLS
	1114	@\$(call echo_message, Building)
	1115	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	1116	./create-sbu_du-report.sh logs $VERSION; \\
	1117	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1118	fi;
	1119	@touch \$@
	1120
[7d9a82d]	1121	do-housekeeping:
[4524fb2]	1122	@-umount \$(MOUNT_PT)/dev/pts
[269d81c]	1123	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
	1124	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1125	umount \$(MOUNT_PT)/\$\$link; \\
	1126	unset link; \\
	1127	else \\
	1128	umount \$(MOUNT_PT)/dev/shm; \\
	1129	fi
[4524fb2]	1130	@-umount \$(MOUNT_PT)/dev
	1131	@-umount \$(MOUNT_PT)/sys
	1132	@-umount \$(MOUNT_PT)/proc
[045b2dc]	1133	@-rm /tools /cross-tools
[6ad5a2f]	1134	@-if [ ! -f luser-exist ]; then \\
	1135	userdel \$(LUSER); \\
[962793a]	1136	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1137	fi;
	1138
[877cc6a]	1139	EOF
	1140	) >> $MKFILE
[045b2dc]	1141
[877cc6a]	1142	fi
	1143
[045b2dc]	1144	################### BOOT #####################
[877cc6a]	1145
	1146	if [[ "${METHOD}" = "boot" ]]; then
	1147	(
[045b2dc]	1148	cat << EOF
[877cc6a]	1149
[3f83cb0]	1150	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
[045b2dc]	1151	@sudo make restore-luser-env
	1152	@sudo make do-housekeeping
[877cc6a]	1153	@\$(call echo_boot_finished,$VERSION)
	1154
[3e7ceed]	1155	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1156	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1157	@\$(call echo_finished,$VERSION)
	1158
	1159
[045b2dc]	1160	ck_UID:
	1161	@if [ \`id -u\` = "0" ]; then \\
	1162	echo "+--------------------------------------------------+"; \\
	1163	echo "\|You cannot run this makefile from the root account\|"; \\
	1164	echo "\|However, if this is the boot environment \|"; \\
	1165	echo "\| the command you are looking for is \|"; \\
	1166	echo "\| make makesys \|"; \\
[730436a]	1167	echo "\| to complete the build \|"; \\
[045b2dc]	1168	echo "+--------------------------------------------------+"; \\
	1169	exit 1; \\
	1170	fi
[877cc6a]	1171
[045b2dc]	1172	#---------------AS ROOT
[877cc6a]	1173
[045b2dc]	1174	mk_SETUP:
	1175	@\$(call echo_SU_request)
[7a43320]	1176	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1177	@touch \$@
	1178
	1179	#---------------AS LUSER
[a160d86]	1180
[3f83cb0]	1181	mk_F_PREPS: mk_SETUP
	1182	@\$(call echo_PHASE,Final Preparations and Cross Tools)
[730436a]	1183	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1184	@touch \$@
	1185
[3f83cb0]	1186	mk_SUDO: mk_F_PREPS
[7a43320]	1187	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1188	@touch \$@
	1189
	1190	#---------------AS ROOT
	1191
	1192	mk_FINAL:
	1193	@\$(call echo_PHASE,Final System)
[7a43320]	1194	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1195	@touch \$@
	1196
[269d81c]	1197	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1198	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1199	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1200	( make -C $BLFS_ROOT/work ); \\
	1201	fi;
	1202	@touch \$@
[269d81c]	1203
	1204	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1205	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1206	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1207	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1208	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1209	fi;
	1210	@touch \$@
	1211
	1212	SETUP: $host_prep
[3f83cb0]	1213	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
[3e7ceed]	1214	SUDO: $orphan_scripts
[aec4483]	1215	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1216	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1217	CUSTOM_TOOLS: $custom_list
[045b2dc]	1218
	1219	do-housekeeping:
	1220	@-rm /tools /cross-tools
	1221	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1222	userdel \$(LUSER); \\
[962793a]	1223	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1224	fi;
	1225
[045b2dc]	1226	EOF
	1227	) >> $MKFILE
	1228	fi
	1229
	1230	(
	1231	cat << EOF
	1232
[6ad5a2f]	1233	restore-luser-env:
[877cc6a]	1234	@\$(call echo_message, Building)
[962793a]	1235	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1236	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1237	fi;
[962793a]	1238	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1239	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1240	fi;
[962793a]	1241	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1242	touch \$@ && \\
	1243	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1244	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1245
[045b2dc]	1246	########################################################
	1247
[7d9a82d]	1248
[877cc6a]	1249	EOF
	1250	) >> $MKFILE
	1251
	1252	# Bring over the items from the Makefile.tmp
	1253	cat $MKFILE.tmp >> $MKFILE
	1254	rm $MKFILE.tmp
	1255
[045b2dc]	1256	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1257	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: