Context Navigation

source: CLFS/master.sh@ 80f0ea1

experimental

Last change on this file since 80f0ea1 was 80f0ea1, checked in by George Boudreau <georgeb@…>, 18 years ago
Added PATH variable to generated Makefile. /usr/sbin may not be in builders PATH
Property mode set to `100755`
File size: 46.7 KB

Rev	Line
[0170229]	1	#!/bin/sh
[1ce084e]	2	# $Id$
[0170229]	3
[d14903f]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
[0170229]	7	###################################
	8	### FUNCTIONS ###
	9	###################################
	10
[d14903f]	11	#--------------------------------------#
	12	BOOT_wrt_target() { # "${this_script}" "$PREV"
	13	#--------------------------------------#
	14	local i=$1
	15	local PREV=$2
	16	case $i in
	17	iteration* ) local LOGFILE=$this_script.log ;;
	18	* ) local LOGFILE=$this_script ;;
	19	esac
	20	(
	21	cat << EOF
	22
	23	$i: $PREV
	24	@\$(call echo_message, Building)
	25	@./progress_bar.sh \$@ \$\$PPID &
	26	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude=${SCRIPT_ROOT}\`\n" >logs/$LOGFILE
	27	EOF
	28	) >> $MKFILE.tmp
	29	}
	30
	31	#--------------------------------------#
	32	BOOT_wrt_Unpack() { # "$pkg_tarball"
	33	#--------------------------------------#
	34	local FILE=$1
	35	local optSAVE_PREVIOUS=$2
	36
	37	if [ "${optSAVE_PREVIOUS}" != "1" ]; then
	38	(
	39	cat << EOF
	40	@\$(call remove_existing_dirs2,$FILE)
	41	EOF
	42	) >> $MKFILE.tmp
	43	fi
	44	(
	45	cat << EOF
	46	@\$(call unpack3,$FILE)
	47	@\$(call get_pkg_root2)
	48	EOF
	49	) >> $MKFILE.tmp
	50	}
	51
	52	#----------------------------------#
	53	BOOT_wrt_RunAsRoot() { # "${this_script}" "${file}"
	54	#----------------------------------#
	55	local this_script=$1
	56	local file=$2
	57	(
	58	cat << EOF
	59	@( time { source envars && ${PROGNAME}-commands/`dirname $file`/\$@ >>logs/\$@ 2>&1 ; } ) 2>>logs/\$@ && \\
	60	echo -e "\nKB: \`du -skx --exclude=${SCRIPT_ROOT} \`\n" >>logs/\$@
	61	EOF
	62	) >> $MKFILE.tmp
	63	}
	64
	65	#--------------------------------------#
	66	BOOT_wrt_RemoveBuildDirs() { # "${name}"
	67	#--------------------------------------#
	68	local name=$1
	69	(
	70	cat << EOF
	71	@\$(call remove_build_dirs2,$name)
	72	EOF
	73	) >> $MKFILE.tmp
	74	}
[0170229]	75
[d14903f]	76	#----------------------------------#
	77	BOOT_wrt_test_log() { #
	78	#----------------------------------#
	79	local TESTLOGFILE=$1
	80	(
	81	cat << EOF
	82	@echo "export TEST_LOG=/\$(SCRIPT_ROOT)/test-logs/$TESTLOGFILE" >> envars && \\
	83	echo -e "\n\`date\`\n" >test-logs/$TESTLOGFILE
	84	EOF
	85	) >> $MKFILE.tmp
	86	}
	87
	88	#----------------------------------#
	89	BOOT_wrt_CopyFstab() { #
	90	#----------------------------------#
	91	(
	92	cat << EOF
	93	@( time { cp -v /sources/fstab /etc/fstab >>logs/${this_script} 2>&1 ; } ) 2>>logs/${this_script}
	94	EOF
	95	) >> $MKFILE.tmp
	96	}
	97
	98
	99	########################################
	100
	101
	102	#--------------------------------------#
	103	host_prep_Makefiles() { #
	104	#--------------------------------------#
[3b63c8c]	105	local CLFS_HOST
[0170229]	106
[d14903f]	107	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[0170229]	108
	109	# defined here, only for ease of reading
[3b63c8c]	110	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[0170229]	111	(
	112	cat << EOF
	113	023-creatingtoolsdir:
	114	@\$(call echo_message, Building)
[9199a13]	115	@mkdir \$(MOUNT_PT)/tools && \\
	116	rm -f /tools && \\
	117	ln -s \$(MOUNT_PT)/tools /
[0170229]	118	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	119	mkdir \$(MOUNT_PT)/sources; \\
	120	fi;
	121	@chmod a+wt \$(MOUNT_PT)/sources && \\
[9199a13]	122	touch \$@ && \\
	123	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	124	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	125
	126	024-creatingcrossdir: 023-creatingtoolsdir
	127	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[9199a13]	128	rm -f /cross-tools && \\
	129	ln -s \$(MOUNT_PT)/cross-tools /
	130	@touch \$@ && \\
	131	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	132	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	133
	134	025-addinguser: 024-creatingcrossdir
	135	@\$(call echo_message, Building)
[9485eba]	136	@if [ ! -d /home/\$(LUSER) ]; then \\
	137	groupadd \$(LGROUP); \\
	138	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[0170229]	139	else \\
[30737ea8]	140	touch luser-exist; \\
[0170229]	141	fi;
[9485eba]	142	@chown \$(LUSER) \$(MOUNT_PT) && \\
	143	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
	144	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
	145	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
[9199a13]	146	touch \$@ && \\
	147	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	148	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	149
	150	026-settingenvironment: 025-addinguser
	151	@\$(call echo_message, Building)
[9485eba]	152	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	153	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[0170229]	154	fi;
[9485eba]	155	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	156	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[0170229]	157	fi;
[9485eba]	158	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	159	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	160	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	161	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	162	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	163	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	164	echo "" >> /home/\$(LUSER)/.bashrc && \\
	165	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	166	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	167	echo "" >> /home/\$(LUSER)/.bashrc && \\
	168	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	169	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	170	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	171	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	172	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[0170229]	173	touch envars && \\
[7d4cc81]	174	chmod -R a+wt \$(MOUNT_PT) && \\
[d14903f]	175	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[9199a13]	176	touch \$@ && \\
	177	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	178	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	179	EOF
	180	) >> $MKFILE.tmp
[d14903f]	181	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[0170229]	182
	183	}
	184
[d14903f]	185	#--------------------------------------#
	186	cross_tools_Makefiles() { #
	187	#--------------------------------------#
	188	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[0170229]	189
	190	for file in cross-tools/* ; do
	191	# Keep the script file name
	192	this_script=`basename $file`
	193	#
	194	# Skip this script...
	195	case $this_script in
	196	cflags \| variables ) # work done in host_prep_Makefiles
	197	continue; ;;
	198	*) ;;
	199	esac
	200	#
	201	# Set the dependency for the first target.
	202	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	203
	204	# First append each name of the script files to a list (this will become
	205	# the names of the targets in the Makefile
	206	cross_tools="$cross_tools $this_script"
	207
	208	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	209	# and binutils in chapter 5)
	210	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	211	-e 's@-static@@' \
	212	-e 's@-final@@' \
[3b63c8c]	213	-e 's@-64@@' \
[0170229]	214	-e 's@-n32@@'`
[3b63c8c]	215	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	216
	217	#--------------------------------------------------------------------#
	218	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	219	#--------------------------------------------------------------------#
	220	#
	221	# Drop in the name of the target on a new line, and the previous target
	222	# as a dependency. Also call the echo_message function.
[d14903f]	223	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	224	#
[3b63c8c]	225	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	226	#
[d14903f]	227	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[0170229]	228	#
[d14903f]	229	LUSER_wrt_RunAsUser "${file}"
[0170229]	230	#
[d14903f]	231	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	232	#
	233	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	234	wrt_touch
[0170229]	235	#
	236	#--------------------------------------------------------------------#
	237	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	238	#--------------------------------------------------------------------#
	239	#
	240	# Keep the script file name for Makefile dependencies.
	241	PREV=$this_script
	242
	243	done # for file in ....
	244	}
	245
[d14903f]	246	#--------------------------------------#
	247	temptools_Makefiles() { #
	248	#--------------------------------------#
	249	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[0170229]	250
	251	for file in temp-system/* ; do
	252	# Keep the script file name
	253	this_script=`basename $file`
[3b63c8c]	254	#
	255	# Deal with any odd scripts..
	256	case $this_script in
	257	*choose) # The choose script will fail if you cannot enter the new environment
	258	# If the 'boot' build method was chosen don't run the script
	259	[[ $METHOD = "boot" ]] && continue; ;;
	260	*) ;;
	261	esac
	262
[0170229]	263	#
	264	# First append each name of the script files to a list (this will become
	265	# the names of the targets in the Makefile
	266	temptools="$temptools $this_script"
	267
	268	#
	269	# Grab the name of the target, strip id number, XXX-script
	270	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	271	#
[3b63c8c]	272	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	273
	274	#--------------------------------------------------------------------#
	275	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	276	#--------------------------------------------------------------------#
	277	#
	278	# Drop in the name of the target on a new line, and the previous target
	279	# as a dependency. Also call the echo_message function.
[d14903f]	280	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	281	#
[3b63c8c]	282	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	283	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	284	#
[d14903f]	285	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	286	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	287	#
[d14903f]	288	LUSER_wrt_RunAsUser "${file}"
[0170229]	289	#
[d14903f]	290	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	291	#
	292	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	293	wrt_touch
[0170229]	294	#
	295	#--------------------------------------------------------------------#
	296	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	297	#--------------------------------------------------------------------#
	298	#
	299	# Keep the script file name for Makefile dependencies.
	300	PREV=$this_script
	301	done # for file in ....
	302	}
	303
	304
[d14903f]	305	#--------------------------------------#
	306	chroot_Makefiles() { #
	307	#--------------------------------------#
	308	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[0170229]	309
[d14903f]	310	for file in chroot/* ; do
[0170229]	311	# Keep the script file name
	312	this_script=`basename $file`
[d14903f]	313	#
	314	# Skipping scripts is done now and not included in the build tree.
[0170229]	315	case $this_script in
[d14903f]	316	chroot) continue ;;
[0170229]	317	esac
[d14903f]	318
[0170229]	319	#
	320	# First append each name of the script files to a list (this will become
	321	# the names of the targets in the Makefile
[d14903f]	322	case "${this_script}" in
[7d4cc81]	323	*util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	324	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	325	*) chroottools="$chroottools $this_script" ;;
[0167dd8]	326	esac
[d14903f]	327
	328	# Grab the name of the target, strip id number, XXX-script
	329	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	330
[3b63c8c]	331	pkg_tarball=$(get_package_tarball_name $name)
[0167dd8]	332
[1ba5024]	333	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[0167dd8]	334	# .. Customized makefile entry
[d14903f]	335	case "${this_script}" in
[0167dd8]	336	*util-linux)
[d14903f]	337	LUSER_wrt_target "${this_script}" "$PREV"
[1ba5024]	338	LUSER_wrt_unpack "$pkg_tarball"
	339	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[d14903f]	340	LUSER_wrt_RunAsUser "${file}"
	341	LUSER_RemoveBuildDirs "${name}"
	342	wrt_touch
	343	temptools="$temptools $this_script"
	344	continue ;;
	345	esac
	346
[0170229]	347
	348	#--------------------------------------------------------------------#
	349	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	350	#--------------------------------------------------------------------#
	351	#
	352	# Drop in the name of the target on a new line, and the previous target
	353	# as a dependency. Also call the echo_message function.
[d14903f]	354	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	355	#
[3b63c8c]	356	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	357	# Insert instructions for unpacking the package and changing directories
	358	#
[d14903f]	359	if [ "$pkg_tarball" != "" ] ; then
	360	case $this_script in
	361	*util-linux) ROOT_Unpack "$pkg_tarball" ;;
	362	*) CHROOT_Unpack "$pkg_tarball" ;;
	363	esac
	364	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	365	fi
[0170229]	366	#
	367	# Select a script execution method
	368	case $this_script in
[d14903f]	369	*kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;;
	370	*util-linux) ROOT_RunAsRoot "${file}" ;;
	371	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[0170229]	372	esac
	373	#
[d14903f]	374	# Housekeeping...remove the build directory(ies), except if the package build fails.
	375	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	376	#
	377	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	378	wrt_touch
[0170229]	379	#
	380	#--------------------------------------------------------------------#
	381	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	382	#--------------------------------------------------------------------#
	383	#
	384	# Keep the script file name for Makefile dependencies.
	385	PREV=$this_script
	386
[d14903f]	387	done # for file in...
[0170229]	388	}
	389
	390
[d14903f]	391	#--------------------------------------#
	392	boot_Makefiles() { #
	393	#--------------------------------------#
[0167dd8]	394
[d14903f]	395	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	396	#
	397	# Create a target bootable partition containing a compile environment. Later
	398	# on we boot into this environment and contine the build.
	399	#
	400	for file in boot/* ; do
[0170229]	401	# Keep the script file name
	402	this_script=`basename $file`
[d14903f]	403
	404	# A little housekeeping on the scripts
[fd5cb46]	405	case $this_script in
[d14903f]	406	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
	407	whatnext) continue ;;
	408	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	409	*kernel) # if there is no kernel config file do not build the kernel
	410	[[ -z $CONFIG ]] && continue
	411	# Copy the config file to /sources with a standardized name
	412	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	413	;;
[fd5cb46]	414	esac
[0170229]	415	#
	416	# First append each name of the script files to a list (this will become
	417	# the names of the targets in the Makefile
[d14903f]	418	case "${this_script}" in
	419	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	420	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	421	*) boottools="$boottools $this_script" ;;
	422	esac
	423	#
	424	# Grab the name of the target, strip id number and misc words.
	425	case $this_script in
	426	*kernel) name=linux ;;
	427	*bootscripts) name="bootscripts-cross-lfs" ;;
	428	*udev-rules) name="udev-cross-lfs" ;;
	429	*grub-build) name=grub ;;
	430	*-aboot-build) name=aboot ;;
	431	*yaboot-build) name=yaboot ;;
	432	*colo-build) name=colo ;;
	433	*silo-build) name=silo ;;
	434	*arcload-build) name=arcload ;;
	435	*lilo-build) name=lilo ;;
	436	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	437	esac
	438	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[3b63c8c]	439	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	440
	441	#--------------------------------------------------------------------#
	442	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	443	#--------------------------------------------------------------------#
	444	#
	445	# Drop in the name of the target on a new line, and the previous target
	446	# as a dependency. Also call the echo_message function.
[d14903f]	447	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	448	#
[3b63c8c]	449	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	450	# Insert instructions for unpacking the package and changing directories
	451	#
[d14903f]	452	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
	453	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	454	#
	455	# Select a script execution method
	456	case $this_script in
[d14903f]	457	# The following 2 scripts are defined in the /boot directory but need
	458	# to be run as a root user. Set them up here but run them in another phase
	459	changingowner) wrt_RunAsRoot "${this_script}" "${file}" ;;
	460	devices) wrt_RunAsRoot "${this_script}" "${file}" ;;
	461	fstab) if [[ -n "$FSTAB" ]]; then
	462	LUSER_wrt_CopyFstab
	463	else
	464	LUSER_wrt_RunAsUser "${file}"
	465	fi
	466	;;
	467	*) LUSER_wrt_RunAsUser "${file}" ;;
[0170229]	468	esac
	469	#
[d14903f]	470	# Housekeeping...remove any build directory(ies) except if the package build fails.
	471	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	472	#
	473	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	474	wrt_touch
[0170229]	475	#
	476	#--------------------------------------------------------------------#
	477	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	478	#--------------------------------------------------------------------#
	479	#
	480	# Keep the script file name for Makefile dependencies.
	481	PREV=$this_script
	482
[d14903f]	483	done
[0170229]	484	}
	485
	486
[d14903f]	487	#--------------------------------------#
	488	chroot_testsuite_tools_Makefiles() { #
	489	#--------------------------------------#
	490	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
[0170229]	491
	492	for file in testsuite-tools/* ; do
	493	# Keep the script file name
	494	this_script=`basename $file`
	495
	496	# First append each name of the script files to a list (this will become
	497	# the names of the targets in the Makefile
	498	testsuitetools="$testsuitetools $this_script"
	499
	500	# Grab the name of the target, strip id number, XXX-script
	501	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	502	-e 's@-64bit@@' \
	503	-e 's@-64@@' \
	504	-e 's@64@@' \
	505	-e 's@n32@@'`
	506
[3b63c8c]	507	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	508
	509	#--------------------------------------------------------------------#
	510	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	511	#--------------------------------------------------------------------#
	512	#
	513	# Drop in the name of the target on a new line, and the previous target
	514	# as a dependency. Also call the echo_message function.
[d14903f]	515	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	516	#
[d14903f]	517	CHROOT_Unpack "$pkg_tarball"
[c205656]	518	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	519	#
[d14903f]	520	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	521	#
[d14903f]	522	CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	523	#
	524	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	525	wrt_touch
[0170229]	526	#
	527	#--------------------------------------------------------------------#
	528	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	529	#--------------------------------------------------------------------#
	530	#
	531	# Keep the script file name for Makefile dependencies.
	532	PREV=$this_script
	533
	534	done
	535	}
	536
[d14903f]	537	#--------------------------------------#
	538	boot_testsuite_tools_Makefiles() { #
	539	#--------------------------------------#
	540	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[0170229]	541	for file in testsuite-tools/* ; do
	542	# Keep the script file name
	543	this_script=`basename $file`
	544
	545	# First append each name of the script files to a list (this will become
	546	# the names of the targets in the Makefile
[39d4d5c]	547	PREV=
[0170229]	548	testsuitetools="$testsuitetools $this_script"
	549
	550	# Grab the name of the target, strip id number, XXX-script
	551	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	552	-e 's@-64bit@@' \
	553	-e 's@-64@@' \
	554	-e 's@64@@' \
	555	-e 's@n32@@'`
	556
[3b63c8c]	557	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	558
	559	#--------------------------------------------------------------------#
	560	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	561	#--------------------------------------------------------------------#
	562	#
	563	# Drop in the name of the target on a new line, and the previous target
	564	# as a dependency. Also call the echo_message function.
[d14903f]	565	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	566	#
[d14903f]	567	BOOT_wrt_Unpack "$pkg_tarball"
[c205656]	568	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	569	#
[d14903f]	570	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	571	#
[d14903f]	572	BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	573	#
	574	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	575	wrt_touch
[0170229]	576	#
	577	#--------------------------------------------------------------------#
	578	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	579	#--------------------------------------------------------------------#
	580	#
	581	# Keep the script file name for Makefile dependencies.
	582	PREV=$this_script
	583
	584	done
[d14903f]	585
[0170229]	586	}
	587
	588
[d14903f]	589	#--------------------------------------#
	590	chroot_final_system_Makefiles() { #
	591	#--------------------------------------#
[b12abe1]	592	# Set envars and scripts for iteration targets
	593	LOGS="" # Start with an empty global LOGS envar
	594	if [[ -z "$1" ]] ; then
	595	local N=""
	596	else
	597	local N=-build_$1
	598	local basicsystem=""
	599	mkdir final-system$N
	600	cp final-system/* final-system$N
	601	for script in final-system$N/* ; do
	602	# Overwrite existing symlinks, files, and dirs
	603	sed -e 's/ln -sv/&f/g' \
	604	-e 's/mv -v/&f/g' \
	605	-e 's/mkdir -v/&p/g' -i ${script}
	606	done
	607	# Remove Bzip2 binaries before make install
	608	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	609	# Delete *old Readline libraries just after make install
	610	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	611	fi
	612
[d14903f]	613	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
[0170229]	614
[b12abe1]	615	for file in final-system$N/* ; do
[0170229]	616	# Keep the script file name
	617	this_script=`basename $file`
	618
[b12abe1]	619	# Test if the stripping phase must be skipped.
	620	# Skip alsp temp-perl for iterative runs
[fd5cb46]	621	case $this_script in
[47fddc8]	622	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[b12abe1]	623	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	624	esac
[3fcd63e]	625
[0170229]	626	# Grab the name of the target, strip id number, XXX-script
	627	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	628	-e 's@temp-@@' \
	629	-e 's@-64bit@@' \
	630	-e 's@-64@@' \
	631	-e 's@64@@' \
	632	-e 's@n32@@'`
	633
[b12abe1]	634	# Find the version of the command files, if it corresponds with the building of
	635	# a specific package. We need this here to can skip scripts not needed for
	636	# iterations rebuilds
[3b63c8c]	637	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	638
[3b63c8c]	639	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	640	case "${this_script}" in
	641	stripping) ;;
	642	*) continue ;;
	643	esac
	644	fi
	645
	646	# Append each name of the script files to a list (this will become
	647	# the names of the targets in the Makefile
	648	basicsystem="$basicsystem ${this_script}${N}"
	649
	650	# Append each name of the script files to a list (this will become
	651	# the names of the logs to be moved for each iteration)
	652	LOGS="$LOGS ${this_script}"
	653
[0170229]	654	#--------------------------------------------------------------------#
	655	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	656	#--------------------------------------------------------------------#
	657	#
	658	# Drop in the name of the target on a new line, and the previous target
	659	# as a dependency. Also call the echo_message function.
[d14903f]	660	CHROOT_wrt_target "${this_script}${N}" "$PREV"
[0170229]	661
[3b63c8c]	662	# If $pkg_tarball isn't empty, we've got a package...
	663	if [ "$pkg_tarball" != "" ] ; then
[d14903f]	664	CHROOT_Unpack "$pkg_tarball"
[e35e794]	665	# If the testsuites must be run, initialize the log file
	666	case $name in
	667	binutils \| gcc \| glibc )
[d14903f]	668	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[e35e794]	669	;;
	670	* )
[d14903f]	671	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[e35e794]	672	;;
	673	esac
	674	# If using optimizations, write the instructions
[c205656]	675	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	676	fi
	677	#
[d14903f]	678	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	679	#
[d14903f]	680	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	681	#
	682	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	683	wrt_touch
[0170229]	684	#
	685	#--------------------------------------------------------------------#
	686	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	687	#--------------------------------------------------------------------#
	688	#
	689	# Keep the script file name for Makefile dependencies.
[b12abe1]	690	PREV=${this_script}${N}
	691	# Set system_build envar for iteration targets
	692	system_build=$basicsystem
[0170229]	693	done # for file in final-system/* ...
	694	}
	695
[d14903f]	696	#--------------------------------------#
	697	boot_final_system_Makefiles() { #
	698	#--------------------------------------#
[b12abe1]	699	# Set envars and scripts for iteration targets
	700	LOGS="" # Start with an empty global LOGS envar
	701	if [[ -z "$1" ]] ; then
	702	local N=""
	703	# The makesys phase was initiated in bm_testsuite_tools_makefile
	704	[[ "$TEST" = 0 ]] && PREV=""
	705	else
	706	local N=-build_$1
	707	local basicsystem=""
	708	mkdir final-system$N
	709	cp final-system/* final-system$N
	710	for script in final-system$N/* ; do
	711	# Overwrite existing symlinks, files, and dirs
	712	sed -e 's/ln -sv/&f/g' \
	713	-e 's/mv -v/&f/g' \
	714	-e 's/mkdir -v/&p/g' -i ${script}
	715	done
	716	# Remove Bzip2 binaries before make install
	717	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	718	# Delete *old Readline libraries just after make install
	719	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	720	fi
[0170229]	721
[d14903f]	722	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
[39d4d5c]	723
[b12abe1]	724	for file in final-system$N/* ; do
[0170229]	725	# Keep the script file name
	726	this_script=`basename $file`
	727
[3fcd63e]	728	# Test if the stripping phase must be skipped
[b12abe1]	729	# Skip alsp temp-perl for iterative runs
[64cc345]	730	case $this_script in
[47fddc8]	731	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[b12abe1]	732	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	733	esac
[0170229]	734
	735	# Grab the name of the target, strip id number, XXX-script
	736	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	737	-e 's@temp-@@' \
	738	-e 's@-64bit@@' \
	739	-e 's@-64@@' \
	740	-e 's@64@@' \
	741	-e 's@n32@@'`
	742
[b12abe1]	743	# Find the version of the command files, if it corresponds with the building of
	744	# a specific package. We need this here to can skip scripts not needed for
	745	# iterations rebuilds
[0170229]	746
[3b63c8c]	747	pkg_tarball=$(get_package_tarball_name $name)
	748
	749	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	750	case "${this_script}" in
	751	stripping) ;;
	752	*) continue ;;
	753	esac
	754	fi
	755
	756	# Append each name of the script files to a list (this will become
	757	# the names of the targets in the Makefile
	758	basicsystem="$basicsystem ${this_script}${N}"
	759
	760	# Append each name of the script files to a list (this will become
	761	# the names of the logs to be moved for each iteration)
	762	LOGS="$LOGS ${this_script}"
	763
[0170229]	764	#--------------------------------------------------------------------#
	765	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	766	#--------------------------------------------------------------------#
	767	#
	768	# Drop in the name of the target on a new line, and the previous target
	769	# as a dependency. Also call the echo_message function.
[d14903f]	770	BOOT_wrt_target "${this_script}${N}" "$PREV"
[0170229]	771
[3b63c8c]	772	# If $pkg_tarball isn't empty, we've got a package...
	773	if [ "$pkg_tarball" != "" ] ; then
	774	FILE="$pkg_tarball"
[d14903f]	775	BOOT_wrt_Unpack "$FILE"
[e35e794]	776	# If the testsuites must be run, initialize the log file
	777	case $name in
	778	binutils \| gcc \| glibc )
[d14903f]	779	[[ "$TEST" != "0" ]] && BOOT_wrt_test_log "${this_script}"
[e35e794]	780	;;
	781	* )
[d14903f]	782	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && BOOT_wrt_test_log "${this_script}"
[e35e794]	783	;;
	784	esac
	785	# If using optimizations, write the instructions
[c205656]	786	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	787	fi
	788	#
[d14903f]	789	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	790	#
[d14903f]	791	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	792	#
	793	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	794	wrt_touch
[0170229]	795	#
	796	#--------------------------------------------------------------------#
	797	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	798	#--------------------------------------------------------------------#
	799	#
	800	# Keep the script file name for Makefile dependencies.
[b12abe1]	801	PREV=${this_script}${N}
	802	# Set system_build envar for iteration targets
	803	system_build=$basicsystem
[0170229]	804	done # for file in final-system/* ...
	805
[d14903f]	806	}
[0170229]	807
[d14903f]	808	#--------------------------------------#
	809	chroot_bootscripts_Makefiles() { #
	810	#--------------------------------------#
	811	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
[0170229]	812
	813	for file in bootscripts/* ; do
	814	# Keep the script file name
	815	this_script=`basename $file`
	816
	817	case $this_script in
[eba62c0]	818	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
[0170229]	819	console) continue ;; # Use the files that came with the bootscripts
	820	*) ;;
	821	esac
	822
	823	# First append each name of the script files to a list (this will become
	824	# the names of the targets in the Makefile
	825	bootscripttools="$bootscripttools $this_script"
	826
	827	# Grab the name of the target, strip id number, XXX-script
	828	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	829	-e 's@-64bit@@' \
	830	-e 's@-64@@' \
	831	-e 's@64@@' \
	832	-e 's@n32@@'`
[fd5cb46]	833	case $name in
[eba62c0]	834	bootscripts) name=bootscripts-cross-lfs ;;
	835	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	836	esac
[3b63c8c]	837
	838	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	839
	840	#--------------------------------------------------------------------#
	841	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	842	#--------------------------------------------------------------------#
	843	#
	844	# Drop in the name of the target on a new line, and the previous target
	845	# as a dependency. Also call the echo_message function.
[d14903f]	846	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	847	#
[3b63c8c]	848	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	849	#
[d14903f]	850	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[0170229]	851	#
[d14903f]	852	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	853	#
[d14903f]	854	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	855	#
	856	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	857	wrt_touch
[0170229]	858	#
	859	#--------------------------------------------------------------------#
	860	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	861	#--------------------------------------------------------------------#
	862	#
	863	# Keep the script file name for Makefile dependencies.
	864	PREV=$this_script
	865
	866	done # for file in bootscripts/* ...
	867	}
	868
[d14903f]	869	#--------------------------------------#
	870	boot_bootscripts_Makefiles() { #
	871	#--------------------------------------#
	872	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
[0170229]	873
	874	for file in bootscripts/* ; do
	875	# Keep the script file name
	876	this_script=`basename $file`
	877
	878	case $this_script in
[9485eba]	879	*udev) continue ;; # This is not a script but a commentary
[0170229]	880	console) continue ;; # Use the files that came with the bootscripts
	881	*) ;;
	882	esac
	883
	884	# First append each name of the script files to a list (this will become
	885	# the names of the targets in the Makefile
	886	bootscripttools="$bootscripttools $this_script"
	887
	888	# Grab the name of the target, strip id number, XXX-script
	889	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	890	-e 's@-64bit@@' \
	891	-e 's@-64@@' \
	892	-e 's@64@@' \
	893	-e 's@n32@@'`
[fd5cb46]	894	case $name in
[9485eba]	895	bootscripts) name=bootscripts-cross-lfs ;;
	896	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	897	esac
[3b63c8c]	898
	899	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	900
	901	#--------------------------------------------------------------------#
	902	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	903	#--------------------------------------------------------------------#
	904	#
	905	# Drop in the name of the target on a new line, and the previous target
	906	# as a dependency. Also call the echo_message function.
[d14903f]	907	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	908	#
[3b63c8c]	909	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	910	#
[d14903f]	911	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
[0170229]	912	#
[d14903f]	913	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	914	#
[d14903f]	915	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	916	#
	917	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	918	wrt_touch
[0170229]	919	#
	920	#--------------------------------------------------------------------#
	921	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	922	#--------------------------------------------------------------------#
	923	#
	924	# Keep the script file name for Makefile dependencies.
	925	PREV=$this_script
	926
	927	done # for file in bootscripts/* ...
	928	}
	929
[d14903f]	930	#--------------------------------------#
	931	chroot_bootable_Makefiles() { #
	932	#--------------------------------------#
	933	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
[0170229]	934
[7f38b6d]	935	for file in {bootable,the-end}/* ; do
[0170229]	936	# Keep the script file name
	937	this_script=`basename $file`
	938
	939	# A little housekeeping on the scripts
	940	case $this_script in
[7f38b6d]	941	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[d14903f]	942	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[87b93b4]	943	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	944	[[ -z $CONFIG ]] && continue
[0271c0c]	945	# Copy the config file to /sources with a standardized name
[1917cad]	946	cp $CONFIG $BUILDDIR/sources/kernel-config
[87b93b4]	947	;;
[0170229]	948	esac
	949	#
	950	# First append each name of the script files to a list (this will become
	951	# the names of the targets in the Makefile
	952	bootabletools="$bootabletools $this_script"
	953	#
	954	# Grab the name of the target, strip id number and misc words.
	955	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
[fd5cb46]	956	case $this_script in
	957	kernel) name=linux
	958	;;
	959	esac
[3b63c8c]	960
	961	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	962
	963	#--------------------------------------------------------------------#
	964	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	965	#--------------------------------------------------------------------#
	966	#
	967	# Drop in the name of the target on a new line, and the previous target
	968	# as a dependency. Also call the echo_message function.
[d14903f]	969	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	970	#
[3b63c8c]	971	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	972	# Insert instructions for unpacking the package and changing directories
	973	#
[d14903f]	974	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[0170229]	975	#
	976	# Select a script execution method
	977	case $this_script in
[d14903f]	978	fstab) if [[ -n "$FSTAB" ]]; then
	979	CHROOT_wrt_CopyFstab
	980	else
	981	CHROOT_wrt_RunAsRoot "${file}"
	982	fi
	983	;;
	984	*) CHROOT_wrt_RunAsRoot "${file}"
	985	;;
[0170229]	986	esac
	987	#
	988	# Housekeeping...remove any build directory(ies) except if the package build fails.
[d14903f]	989	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	990	#
	991	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	992	wrt_touch
[0170229]	993	#
	994	#--------------------------------------------------------------------#
	995	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	996	#--------------------------------------------------------------------#
	997	#
	998	# Keep the script file name for Makefile dependencies.
	999	PREV=$this_script
	1000
	1001	done
	1002
[9e4b9a1]	1003	# Add SBU-disk_usage report target if required
[47fddc8]	1004	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[9e4b9a1]	1005
[0170229]	1006	}
	1007
[d14903f]	1008	#--------------------------------------#
	1009	boot_bootable_Makefiles() { #
	1010	#--------------------------------------#
	1011	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
[0170229]	1012
[7f38b6d]	1013	for file in {bootable,the-end}/* ; do
[0170229]	1014	# Keep the script file name
	1015	this_script=`basename $file`
	1016
	1017	# A little housekeeping on the scripts
	1018	case $this_script in
[7f38b6d]	1019	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[b83baf6]	1020	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	1021	[[ -z $CONFIG ]] && continue
[0271c0c]	1022	# Copy the named config file to /sources with a standardized name
[62033d2]	1023	cp $CONFIG $BUILDDIR/sources/kernel-config
[0170229]	1024	;;
	1025	esac
	1026	#
	1027	# First append each name of the script files to a list (this will become
	1028	# the names of the targets in the Makefile
	1029	bootabletools="$bootabletools $this_script"
	1030	#
	1031	# Grab the name of the target, strip id number and misc words.
	1032	case $this_script in
[3b63c8c]	1033	*kernel) name=linux ;;
[0170229]	1034	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	1035	esac
	1036
[3b63c8c]	1037	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	1038
	1039	#--------------------------------------------------------------------#
	1040	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	1041	#--------------------------------------------------------------------#
	1042	#
	1043	# Drop in the name of the target on a new line, and the previous target
	1044	# as a dependency. Also call the echo_message function.
[d14903f]	1045	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	1046	#
[3b63c8c]	1047	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	1048	# Insert instructions for unpacking the package and changing directories
	1049	#
[d14903f]	1050	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
[0170229]	1051	#
	1052	# Select a script execution method
	1053	case $this_script in
	1054	fstab) if [[ -n "$FSTAB" ]]; then
[a9490ab]	1055	# Minimal boot mode has no access to original file, store in /sources
	1056	cp $FSTAB $BUILDDIR/sources/fstab
[d14903f]	1057	BOOT_wrt_CopyFstab "${this_script}"
[0170229]	1058	else
[d14903f]	1059	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	1060	fi
	1061	;;
[d14903f]	1062	*) BOOT_wrt_RunAsRoot "${this_script}" "${file}" ;;
[0170229]	1063	esac
	1064	#
	1065	# Housekeeping...remove any build directory(ies) except if the package build fails.
[d14903f]	1066	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	1067	#
	1068	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	1069	wrt_touch
[0170229]	1070	#
	1071	#--------------------------------------------------------------------#
	1072	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	1073	#--------------------------------------------------------------------#
	1074	#
	1075	# Keep the script file name for Makefile dependencies.
	1076	PREV=$this_script
	1077	done
	1078
[9e4b9a1]	1079	# Add SBU-disk_usage report target if required
[47fddc8]	1080	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[9e4b9a1]	1081
[d14903f]	1082
[0170229]	1083	}
	1084
	1085
[d14903f]	1086	#--------------------------------------#
	1087	build_Makefile() { # Construct a Makefile from the book scripts
	1088	#--------------------------------------#
	1089	#
	1090	# Script crashes if error trapping is on
	1091	#
	1092	set +e
	1093	declare -f method_cmds
	1094	declare -f testsuite_cmds
	1095	declare -f final_sys_cmds
	1096	declare -f bootscripts_cmds
	1097	declare -f bootable_cmds
	1098	set -e
	1099
	1100	echo "...Creating Makefile... ${BOLD}START${OFF}"
[0170229]	1101
	1102	cd $JHALFSDIR/${PROGNAME}-commands
[d14903f]	1103	# Start with a clean files
	1104	>$MKFILE
[0170229]	1105	>$MKFILE.tmp
	1106
[d14903f]	1107	method_cmds=${METHOD}_Makefiles
	1108	testsuite_cmds=${METHOD}_testsuite_tools_Makefiles
	1109	final_sys_cmds=${METHOD}_final_system_Makefiles
	1110	bootscripts_cmds=${METHOD}_bootscripts_Makefiles
	1111	bootable_cmds=${METHOD}_bootable_Makefiles
[0167dd8]	1112
[d14903f]	1113	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
	1114	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1115	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1116	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1117	if [[ ! $TEST = "0" ]]; then
	1118	$testsuite_cmds # mk_SYSTOOLS (CHROOT) $testsuitetools
[0170229]	1119	fi
[d14903f]	1120	$final_sys_cmds # mk_FINAL (CHROOT) $basicsystem
	1121	# Add the iterations targets, if needed
	1122	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
	1123	$bootscripts_cmds # mk_BOOTSCRIPT (CHROOT) $bootscripttools
	1124	$bootable_cmds # mk_BOOTABLE (CHROOT) $bootabletools
[0170229]	1125
	1126	# Add a header, some variables and include the function file
	1127	# to the top of the real Makefile.
	1128	(
	1129	cat << EOF
	1130	$HEADER
	1131
[398a037]	1132	SRC = /sources
	1133	MOUNT_PT = $BUILDDIR
	1134	PKG_LST = $PKG_LST
	1135	LUSER = $LUSER
	1136	LGROUP = $LGROUP
	1137	SCRIPT_ROOT = $SCRIPT_ROOT
	1138
	1139	BASEDIR = \$(MOUNT_PT)
	1140	SRCSDIR = \$(BASEDIR)/sources
	1141	CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands
	1142	LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs
	1143	TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs
	1144
	1145	crSRCSDIR = /sources
	1146	crCMDSDIR = /\$(SCRIPT_ROOT)/$PROGNAME-commands
	1147	crLOGDIR = /\$(SCRIPT_ROOT)/logs
	1148	crTESTLOGDIR = /\$(SCRIPT_ROOT)/test-logs
	1149
	1150	SU_LUSER = su - \$(LUSER) -c
	1151	LUSER_HOME = /home/\$(LUSER)
	1152	PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n"
[d14903f]	1153	PRT_DU_CR = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) / \`\n"
[0170229]	1154
[80f0ea1]	1155	export PATH := \${PATH}:/usr/sbin
	1156
[0170229]	1157	include makefile-functions
	1158
	1159	EOF
	1160	) > $MKFILE
	1161
	1162	# Add chroot commands
[e676ffa]	1163	if [ "$METHOD" = "chroot" ] ; then
[8381f6e]	1164	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	1165	chroot=`cat chroot/chroot \| \
	1166	sed -e "s@chroot@$CHROOT_LOC@" \
	1167	-e '/#!\/tools\/bin\/bash/d' \
	1168	-e '/^export/d' \
	1169	-e '/^logout/d' \
	1170	-e 's@ \\\@ @g' \| \
	1171	tr -d '\n' \| \
	1172	sed -e 's/ */ /g' \
	1173	-e 's\|\\$\|&&\|g' \
	1174	-e 's\|exit\|\|g' \
	1175	-e 's\|$\| -c\|' \
	1176	-e 's\|"$$CLFS"\|$(MOUNT_PT)\|'\
	1177	-e 's\|set -e\|\|'`
[e676ffa]	1178	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1179	fi
[0170229]	1180
[d14903f]	1181	################## CHROOT ####################
	1182
[39d4d5c]	1183	if [[ "${METHOD}" = "chroot" ]]; then
[0170229]	1184	(
[d14903f]	1185	cat << EOF
	1186
[17cde98]	1187	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS
[7d4cc81]	1188	@sudo make do-housekeeping
[0170229]	1189	@\$(call echo_finished,$VERSION)
	1190
[7d4cc81]	1191	ck_UID:
	1192	@if [ \`id -u\` = "0" ]; then \\
[17cde98]	1193	echo "+--------------------------------------------------+"; \\
	1194	echo "\|You cannot run this makefile from the root account\|"; \\
	1195	echo "+--------------------------------------------------+"; \\
[7d4cc81]	1196	exit 1; \\
	1197	fi
	1198
[d14903f]	1199	#---------------AS ROOT
	1200	mk_SETUP:
	1201	@\$(call echo_SU_request)
	1202	@sudo make SETUP
	1203	@touch \$@
[0167dd8]	1204
[d14903f]	1205	#---------------AS LUSER
	1206	mk_CROSS: mk_SETUP
[17cde98]	1207	@\$(call echo_PHASE,Cross and Temporary Tools)
	1208	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make AS_LUSER" )
[d14903f]	1209	@touch \$@
	1210
[17cde98]	1211	mk_SUDO: mk_CROSS
[7d4cc81]	1212	@sudo make SUDO
	1213	@touch \$@
[d14903f]	1214	#
	1215	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
	1216	# chroot environment. (Unless someone knows a different way)
	1217	# Manually create the /bin directory and provide link to the /tools dir.
[0167dd8]	1218	# Also change the original symlink creation to include (f)orce to prevent failure due to
[d14903f]	1219	# pre-existing links.
	1220
	1221	#---------------CHROOT JAIL
[0167dd8]	1222	mk_SYSTOOLS: mk_SUDO
[496f8f3]	1223	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
	1224	mkdir \$(MOUNT_PT)/bin; \\
	1225	cd \$(MOUNT_PT)/bin && \\
	1226	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
	1227	fi;
[9b3d015]	1228	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/082-createfiles
[d14903f]	1229	@\$(call echo_CHROOT_request)
[17cde98]	1230	@\$(call echo_PHASE, CHROOT JAIL )
	1231	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
[d14903f]	1232	@touch \$@
	1233
	1234
	1235
[17cde98]	1236	SETUP: $host_prep
	1237	AS_LUSER: $cross_tools $temptools
	1238	SUDO: $orphan_scripts
	1239	CHROOT_JAIL: ${chroottools}${boottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
[0170229]	1240
[d14903f]	1241	EOF
	1242	) >> $MKFILE
	1243	fi
[0170229]	1244
[d14903f]	1245	################### BOOT #####################
[0170229]	1246
[d14903f]	1247	if [[ "${METHOD}" = "boot" ]]; then
	1248	(
	1249	cat << EOF
[0170229]	1250
[17cde98]	1251	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
[7d4cc81]	1252	@sudo make restore-luser-env
[d14903f]	1253	@\$(call echo_boot_finished,$VERSION)
[0170229]	1254
[17cde98]	1255	makesys: mk_FINAL
[d14903f]	1256	@\$(call echo_finished,$VERSION)
[0170229]	1257
[7d4cc81]	1258
	1259	ck_UID:
	1260	@if [ \`id -u\` = "0" ]; then \\
[17cde98]	1261	echo "+--------------------------------------------------+"; \\
	1262	echo "\|You cannot run this makefile from the root account\|"; \\
	1263	echo "\|However, if this is the boot environment \|"; \\
	1264	echo "\| the command you are looking for is \|"; \\
	1265	echo "\| make makesys \|"; \\
	1266	echo "\| to finish off the build \|"; \\
	1267	echo "+--------------------------------------------------+"; \\
[7d4cc81]	1268	exit 1; \\
	1269	fi
	1270
[d14903f]	1271	#---------------AS ROOT
[0170229]	1272
[d14903f]	1273	mk_SETUP:
	1274	@\$(call echo_SU_request)
	1275	@sudo make SETUP
	1276	@touch \$@
[0170229]	1277
[d14903f]	1278	#---------------AS LUSER
[0167dd8]	1279
[d14903f]	1280	mk_CROSS: mk_SETUP
	1281	@\$(call echo_PHASE,Cross Tool)
[17cde98]	1282	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make AS_LUSER" )
[7d4cc81]	1283	@touch \$@
	1284
	1285	mk_SUDO: mk_SYSTOOLS
	1286	@sudo make SUDO
[d14903f]	1287	@touch \$@
	1288
	1289	#---------------AS ROOT
[0170229]	1290
[d14903f]	1291	mk_FINAL:
	1292	@\$(call echo_PHASE,Final System)
[17cde98]	1293	@( make AS_ROOT )
[d14903f]	1294	@touch \$@
	1295
[17cde98]	1296	SETUP: $host_prep
[0167dd8]	1297	AS_LUSER: $cross_tools $temptools ${chroottools}${boottools}
[17cde98]	1298	SUDO: $orphan_scripts
[0167dd8]	1299	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
[d14903f]	1300
	1301	EOF
	1302	) >> $MKFILE
	1303	fi
	1304
	1305	(
	1306	cat << EOF
	1307
	1308
	1309	restart:
	1310	@echo "This feature does not exist for the CLFS makefile. (yet)"
[0170229]	1311
[30737ea8]	1312	restore-luser-env:
[0170229]	1313	@\$(call echo_message, Building)
[9485eba]	1314	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1315	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[0170229]	1316	fi;
[9485eba]	1317	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1318	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[0170229]	1319	fi;
[9485eba]	1320	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[9199a13]	1321	touch \$@ && \\
	1322	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1323	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	1324
[3a27393]	1325	do-housekeeping:
[9199a13]	1326	@-umount \$(MOUNT_PT)/dev/pts
	1327	@-umount \$(MOUNT_PT)/dev/shm
	1328	@-umount \$(MOUNT_PT)/dev
	1329	@-umount \$(MOUNT_PT)/sys
	1330	@-umount \$(MOUNT_PT)/proc
[0167dd8]	1331	@-rm /tools /cross-tools
[30737ea8]	1332	@-if [ ! -f luser-exist ]; then \\
[9485eba]	1333	userdel \$(LUSER); \\
	1334	rm -rf /home/\$(LUSER); \\
[3a27393]	1335	fi;
	1336
[d14903f]	1337	########################################################
[39d4d5c]	1338
[3a27393]	1339
[39d4d5c]	1340	EOF
	1341	) >> $MKFILE
[0170229]	1342
	1343	# Bring over the items from the Makefile.tmp
	1344	cat $MKFILE.tmp >> $MKFILE
	1345	rm $MKFILE.tmp
	1346
[d14903f]	1347	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[0170229]	1348	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: