Context Navigation

source: CLFS/master.sh@ aac025d

2.3 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since aac025d was f940c29, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago
CLFS: In the boot method skip *introduction run. The $MOUNT_PT write permission issue is already handled in 026-settingenvironment.
Property mode set to `100644`
File size: 34.7 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[e314f7e]	21	@mkdir \$(MOUNT_PT)/tools && \\
	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[877cc6a]	28	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[6ad5a2f]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[877cc6a]	38	else \\
[6ad5a2f]	39	touch luser-exist; \\
[877cc6a]	40	fi;
[9ae0875]	41	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
[6ad5a2f]	42	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	43	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	44	chmod a+wt \$(SRCSDIR)
	45	@\$(call housekeeping)
[877cc6a]	46
	47	026-settingenvironment: 025-addinguser
	48	@\$(call echo_message, Building)
[962793a]	49	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	50	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[877cc6a]	51	fi;
[962793a]	52	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	53	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	54	fi;
[962793a]	55	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	56	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	57	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	58	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	66	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	67	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
	68	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	69	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[877cc6a]	70	touch envars && \\
[045b2dc]	71	chmod -R a+wt \$(MOUNT_PT) && \\
[dbcdfd7]	72	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT)
	73	@\$(call housekeeping)
[877cc6a]	74	EOF
	75	) >> $MKFILE.tmp
[045b2dc]	76	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	77
	78	}
	79
[045b2dc]	80	#--------------------------------------#
	81	cross_tools_Makefiles() { #
	82	#--------------------------------------#
	83	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	84
	85	for file in cross-tools/* ; do
	86	# Keep the script file name
	87	this_script=`basename $file`
	88	#
	89	# Skip this script...
	90	case $this_script in
	91	cflags \| variables ) # work done in host_prep_Makefiles
	92	continue; ;;
	93	*) ;;
	94	esac
	95	#
	96	# Set the dependency for the first target.
	97	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	98
	99	# First append each name of the script files to a list (this will become
	100	# the names of the targets in the Makefile
	101	cross_tools="$cross_tools $this_script"
	102
	103	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	104	# and binutils in chapter 5)
	105	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	106	-e 's@-static@@' \
	107	-e 's@-final@@' \
[480295c]	108	-e 's@-64@@' \
[877cc6a]	109	-e 's@-n32@@'`
[a160d86]	110	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	111
	112	#--------------------------------------------------------------------#
	113	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	114	#--------------------------------------------------------------------#
	115	#
	116	# Drop in the name of the target on a new line, and the previous target
	117	# as a dependency. Also call the echo_message function.
[045b2dc]	118	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	119	#
[a160d86]	120	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	121	#
[045b2dc]	122	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[877cc6a]	123	#
[045b2dc]	124	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	125	#
[045b2dc]	126	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	127	#
	128	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	129	wrt_touch
[877cc6a]	130	#
	131	#--------------------------------------------------------------------#
	132	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	133	#--------------------------------------------------------------------#
	134	#
	135	# Keep the script file name for Makefile dependencies.
	136	PREV=$this_script
	137
	138	done # for file in ....
	139	}
	140
[045b2dc]	141	#--------------------------------------#
	142	temptools_Makefiles() { #
	143	#--------------------------------------#
	144	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	145
	146	for file in temp-system/* ; do
	147	# Keep the script file name
	148	this_script=`basename $file`
[6f2cd96]	149	#
	150	# Deal with any odd scripts..
	151	case $this_script in
	152	*choose) # The choose script will fail if you cannot enter the new environment
	153	# If the 'boot' build method was chosen don't run the script
	154	[[ $METHOD = "boot" ]] && continue; ;;
	155	*) ;;
	156	esac
[e2ec07a]	157
[877cc6a]	158	#
	159	# First append each name of the script files to a list (this will become
	160	# the names of the targets in the Makefile
	161	temptools="$temptools $this_script"
	162
	163	#
	164	# Grab the name of the target, strip id number, XXX-script
	165	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	166	#
[a160d86]	167	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	168
	169	#--------------------------------------------------------------------#
	170	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	171	#--------------------------------------------------------------------#
	172	#
	173	# Drop in the name of the target on a new line, and the previous target
	174	# as a dependency. Also call the echo_message function.
[045b2dc]	175	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	176	#
[a160d86]	177	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	178	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	179	#
[045b2dc]	180	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[a160d86]	181	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	182	#
[045b2dc]	183	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	184	#
[045b2dc]	185	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	186	#
	187	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	188	wrt_touch
[877cc6a]	189	#
	190	#--------------------------------------------------------------------#
	191	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	192	#--------------------------------------------------------------------#
	193	#
	194	# Keep the script file name for Makefile dependencies.
	195	PREV=$this_script
	196	done # for file in ....
	197	}
	198
	199
[045b2dc]	200	#--------------------------------------#
	201	chroot_Makefiles() { #
	202	#--------------------------------------#
	203	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	204
[045b2dc]	205	for file in chroot/* ; do
[877cc6a]	206	# Keep the script file name
	207	this_script=`basename $file`
[045b2dc]	208	#
	209	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	210	case $this_script in
[045b2dc]	211	chroot) continue ;;
[877cc6a]	212	esac
[045b2dc]	213
[877cc6a]	214	#
	215	# First append each name of the script files to a list (this will become
	216	# the names of the targets in the Makefile
[045b2dc]	217	case "${this_script}" in
	218	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	219	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	220	esac
[045b2dc]	221
	222	# Grab the name of the target, strip id number, XXX-script
	223	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	224
[a160d86]	225	pkg_tarball=$(get_package_tarball_name $name)
	226
[045b2dc]	227	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
	228	# .. Customized makefile entry
	229	case "${this_script}" in
	230	*util-linux)
	231	LUSER_wrt_target "${this_script}" "$PREV"
	232	LUSER_wrt_unpack "$pkg_tarball"
	233	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	234	LUSER_wrt_RunAsUser "${file}"
	235	LUSER_RemoveBuildDirs "${name}"
	236	wrt_touch
[480295c]	237	temptools="$temptools $this_script"
	238	continue ;;
[045b2dc]	239	esac
	240
	241
[877cc6a]	242	#--------------------------------------------------------------------#
	243	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	244	#--------------------------------------------------------------------#
	245	#
	246	# Drop in the name of the target on a new line, and the previous target
	247	# as a dependency. Also call the echo_message function.
[045b2dc]	248	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	249	#
[a160d86]	250	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	251	# Insert instructions for unpacking the package and changing directories
	252	#
[045b2dc]	253	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	254	CHROOT_Unpack "$pkg_tarball"
[045b2dc]	255	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	256	fi
[877cc6a]	257	#
	258	# Select a script execution method
	259	case $this_script in
[8f2c086]	260	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	261	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	262	esac
	263	#
[045b2dc]	264	# Housekeeping...remove the build directory(ies), except if the package build fails.
	265	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	266	#
	267	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	268	wrt_touch
[877cc6a]	269	#
	270	#--------------------------------------------------------------------#
	271	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	272	#--------------------------------------------------------------------#
	273	#
	274	# Keep the script file name for Makefile dependencies.
	275	PREV=$this_script
	276
[045b2dc]	277	done # for file in...
[877cc6a]	278	}
	279
	280
[045b2dc]	281	#--------------------------------------#
	282	boot_Makefiles() { #
	283	#--------------------------------------#
[877cc6a]	284
[045b2dc]	285	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	286	#
	287	# Create a target bootable partition containing a compile environment. Later
	288	# on we boot into this environment and contine the build.
	289	#
	290	for file in boot/* ; do
[877cc6a]	291	# Keep the script file name
	292	this_script=`basename $file`
[045b2dc]	293
	294	# A little housekeeping on the scripts
[877cc6a]	295	case $this_script in
[f940c29]	296	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[045b2dc]	297	whatnext) continue ;;
	298	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	299	*kernel) # if there is no kernel config file do not build the kernel
	300	[[ -z $CONFIG ]] && continue
	301	# Copy the config file to /sources with a standardized name
	302	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	303	;;
[877cc6a]	304	esac
	305	#
	306	# First append each name of the script files to a list (this will become
	307	# the names of the targets in the Makefile
[045b2dc]	308	case "${this_script}" in
	309	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	310	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	311	*) boottools="$boottools $this_script" ;;
	312	esac
	313	#
	314	# Grab the name of the target, strip id number and misc words.
	315	case $this_script in
	316	*kernel) name=linux ;;
	317	*bootscripts) name="bootscripts-cross-lfs" ;;
	318	*udev-rules) name="udev-cross-lfs" ;;
	319	*grub-build) name=grub ;;
	320	*-aboot-build) name=aboot ;;
	321	*yaboot-build) name=yaboot ;;
	322	*colo-build) name=colo ;;
	323	*silo-build) name=silo ;;
	324	*arcload-build) name=arcload ;;
	325	*lilo-build) name=lilo ;;
	326	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	327	esac
	328	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	329	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	330
	331	#--------------------------------------------------------------------#
	332	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	333	#--------------------------------------------------------------------#
	334	#
	335	# Drop in the name of the target on a new line, and the previous target
	336	# as a dependency. Also call the echo_message function.
[045b2dc]	337	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	338	#
[a160d86]	339	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	340	# Insert instructions for unpacking the package and changing directories
	341	#
[045b2dc]	342	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
	343	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	344	#
	345	# Select a script execution method
	346	case $this_script in
[045b2dc]	347	# The following 2 scripts are defined in the /boot directory but need
	348	# to be run as a root user. Set them up here but run them in another phase
[8f2c086]	349	changingowner) wrt_RunAsRoot "${file}" ;;
	350	devices) wrt_RunAsRoot "${file}" ;;
[045b2dc]	351	fstab) if [[ -n "$FSTAB" ]]; then
	352	LUSER_wrt_CopyFstab
	353	else
	354	LUSER_wrt_RunAsUser "${file}"
	355	fi
	356	;;
	357	*) LUSER_wrt_RunAsUser "${file}" ;;
[877cc6a]	358	esac
	359	#
[045b2dc]	360	# Housekeeping...remove any build directory(ies) except if the package build fails.
	361	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	362	#
	363	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	364	wrt_touch
[877cc6a]	365	#
	366	#--------------------------------------------------------------------#
	367	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	368	#--------------------------------------------------------------------#
	369	#
	370	# Keep the script file name for Makefile dependencies.
	371	PREV=$this_script
	372
[045b2dc]	373	done
[877cc6a]	374	}
	375
	376
[045b2dc]	377	#--------------------------------------#
[d55a1a1]	378	testsuite_tools_Makefiles() { #
[045b2dc]	379	#--------------------------------------#
[877cc6a]	380
[d55a1a1]	381	if [[ "${METHOD}" = "chroot" ]]; then
	382	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	383	else
	384	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	385	PREV=""
[d55a1a1]	386	fi
[877cc6a]	387
	388	for file in testsuite-tools/* ; do
	389	# Keep the script file name
	390	this_script=`basename $file`
	391
	392	# First append each name of the script files to a list (this will become
	393	# the names of the targets in the Makefile
	394	testsuitetools="$testsuitetools $this_script"
	395
	396	# Grab the name of the target, strip id number, XXX-script
	397	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	398	-e 's@-64bit@@' \
	399	-e 's@-64@@' \
	400	-e 's@64@@' \
	401	-e 's@n32@@'`
	402
[a160d86]	403	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	404
	405	#--------------------------------------------------------------------#
	406	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	407	#--------------------------------------------------------------------#
	408	#
	409	# Drop in the name of the target on a new line, and the previous target
	410	# as a dependency. Also call the echo_message function.
[ca6b261]	411	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	412	#
[ca6b261]	413	CHROOT_Unpack "$pkg_tarball"
[1b65a84]	414	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	415	#
[ca6b261]	416	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	417	#
[ca6b261]	418	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	419	#
	420	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	421	wrt_touch
[877cc6a]	422	#
	423	#--------------------------------------------------------------------#
	424	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	425	#--------------------------------------------------------------------#
	426	#
	427	# Keep the script file name for Makefile dependencies.
	428	PREV=$this_script
	429
	430	done
	431	}
	432
	433
[045b2dc]	434	#--------------------------------------#
[d55a1a1]	435	final_system_Makefiles() { #
[045b2dc]	436	#--------------------------------------#
[45f82718]	437	# Set envars and scripts for iteration targets
	438	if [[ -z "$1" ]] ; then
	439	local N=""
[d55a1a1]	440	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	441	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	442	else
	443	local N=-build_$1
	444	local basicsystem=""
	445	mkdir final-system$N
	446	cp final-system/* final-system$N
	447	for script in final-system$N/* ; do
	448	# Overwrite existing symlinks, files, and dirs
	449	sed -e 's/ln -sv/&f/g' \
	450	-e 's/mv -v/&f/g' \
	451	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	452	# Rename the scripts
	453	mv ${script} ${script}$N
[45f82718]	454	done
[a5f52ba]	455	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	456	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	457	# Delete *old Readline libraries just after make install
[10c8b78]	458	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	459	fi
	460
[d55a1a1]	461	if [[ "${METHOD}" = "chroot" ]]; then
	462	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	463	else
	464	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	465	fi
[877cc6a]	466
[45f82718]	467	for file in final-system$N/* ; do
[877cc6a]	468	# Keep the script file name
	469	this_script=`basename $file`
	470
[45f82718]	471	# Test if the stripping phase must be skipped.
	472	# Skip alsp temp-perl for iterative runs
[877cc6a]	473	case $this_script in
[401f81e]	474	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	475	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	476	esac
	477
	478	# Grab the name of the target, strip id number, XXX-script
	479	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	480	-e 's@temp-@@' \
	481	-e 's@-64bit@@' \
	482	-e 's@-64@@' \
	483	-e 's@64@@' \
[10c8b78]	484	-e 's@n32@@' \
	485	-e 's,'$N',,'`
[877cc6a]	486
[45f82718]	487	# Find the version of the command files, if it corresponds with the building of
	488	# a specific package. We need this here to can skip scripts not needed for
	489	# iterations rebuilds
[a160d86]	490	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	491
[a160d86]	492	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	493	case "${this_script}" in
	494	stripping) ;;
	495	*) continue ;;
	496	esac
	497	fi
	498
	499	# Append each name of the script files to a list (this will become
	500	# the names of the targets in the Makefile
[10c8b78]	501	basicsystem="$basicsystem ${this_script}"
[45f82718]	502
[877cc6a]	503	#--------------------------------------------------------------------#
	504	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	505	#--------------------------------------------------------------------#
	506	#
	507	# Drop in the name of the target on a new line, and the previous target
	508	# as a dependency. Also call the echo_message function.
[10c8b78]	509	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	510
[a160d86]	511	# If $pkg_tarball isn't empty, we've got a package...
	512	if [ "$pkg_tarball" != "" ] ; then
[f546320]	513	# Touch timestamp file if installed files logs will be created.
	514	# But only for the firt build when running iterative builds.
	515	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	516	CHROOT_wrt_TouchTimestamp
	517	fi
[045b2dc]	518	CHROOT_Unpack "$pkg_tarball"
[a229600]	519	# If the testsuites must be run, initialize the log file
	520	case $name in
	521	binutils \| gcc \| glibc )
[10c8b78]	522	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	523	;;
	524	* )
[10c8b78]	525	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	526	;;
	527	esac
	528	# If using optimizations, write the instructions
[1b65a84]	529	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	530	fi
	531	#
[045b2dc]	532	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	533	#
[f546320]	534	# Write installed files log and remove the build directory(ies)
	535	# except if the package build fails.
	536	if [ "$pkg_tarball" != "" ] ; then
	537	CHROOT_wrt_RemoveBuildDirs "$name"
	538	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	539	CHROOT_wrt_LogNewFiles "$name"
	540	fi
	541	fi
[877cc6a]	542	#
[f546320]	543	# Include a touch of the target name so make can check
	544	# if it's already been made.
[93f38e7]	545	wrt_touch
[877cc6a]	546	#
	547	#--------------------------------------------------------------------#
	548	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	549	#--------------------------------------------------------------------#
	550	#
	551	# Keep the script file name for Makefile dependencies.
[10c8b78]	552	PREV=${this_script}
[45f82718]	553	# Set system_build envar for iteration targets
	554	system_build=$basicsystem
[877cc6a]	555	done # for file in final-system/* ...
	556	}
	557
[045b2dc]	558	#--------------------------------------#
[d55a1a1]	559	bootscripts_Makefiles() { #
[045b2dc]	560	#--------------------------------------#
[d55a1a1]	561
	562	if [[ "${METHOD}" = "chroot" ]]; then
	563	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
[45f82718]	564	else
[d55a1a1]	565	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
[45f82718]	566	fi
[877cc6a]	567
	568	for file in bootscripts/* ; do
	569	# Keep the script file name
	570	this_script=`basename $file`
	571
	572	case $this_script in
	573	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	574	console) continue ;; # Use the files that came with the bootscripts
	575	*) ;;
	576	esac
	577
	578	# First append each name of the script files to a list (this will become
	579	# the names of the targets in the Makefile
	580	bootscripttools="$bootscripttools $this_script"
	581
	582	# Grab the name of the target, strip id number, XXX-script
	583	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	584	-e 's@-64bit@@' \
	585	-e 's@-64@@' \
	586	-e 's@64@@' \
	587	-e 's@n32@@'`
	588	case $name in
[c044e3c]	589	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	590	*udev-rules) name=udev-cross-lfs ;;
	591	esac
[c044e3c]	592
[a160d86]	593	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	594
	595	#--------------------------------------------------------------------#
	596	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	597	#--------------------------------------------------------------------#
	598	#
	599	# Drop in the name of the target on a new line, and the previous target
	600	# as a dependency. Also call the echo_message function.
[045b2dc]	601	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	602	#
[a160d86]	603	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	604	#
[f546320]	605	if [ "$pkg_tarball" != "" ] ; then
	606	if [ "${INSTALL_LOG}" = "y" ] ; then
	607	CHROOT_wrt_LogNewFiles "$name"
	608	fi
	609	CHROOT_Unpack "$pkg_tarball"
	610	fi
[877cc6a]	611	#
[045b2dc]	612	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	613	#
[f546320]	614	# Write installed files log and remove the build directory(ies)
	615	# except if the package build fails.
	616	if [ "$pkg_tarball" != "" ] ; then
	617	CHROOT_wrt_RemoveBuildDirs "$name"
	618	if [ "${INSTALL_LOG}" = "y" ] ; then
	619	CHROOT_wrt_LogNewFiles "$name"
	620	fi
	621	fi
[877cc6a]	622	#
	623	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	624	wrt_touch
[877cc6a]	625	#
	626	#--------------------------------------------------------------------#
	627	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	628	#--------------------------------------------------------------------#
	629	#
	630	# Keep the script file name for Makefile dependencies.
	631	PREV=$this_script
	632
	633	done # for file in bootscripts/* ...
	634	}
	635
[045b2dc]	636	#--------------------------------------#
[d55a1a1]	637	bootable_Makefiles() { #
[045b2dc]	638	#--------------------------------------#
[877cc6a]	639
[d55a1a1]	640	if [[ "${METHOD}" = "chroot" ]]; then
	641	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	642	else
	643	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	644	fi
[877cc6a]	645
	646
[936efa8]	647	for file in bootable/* ; do
[877cc6a]	648	# Keep the script file name
	649	this_script=`basename $file`
	650
	651	# A little housekeeping on the scripts
	652	case $this_script in
	653	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	654	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	655	*kernel) # if there is no kernel config file do not build the kernel
	656	[[ -z $CONFIG ]] && continue
	657	# Copy the config file to /sources with a standardized name
	658	cp $CONFIG $BUILDDIR/sources/kernel-config
	659	;;
	660	esac
	661	#
	662	# First append each name of the script files to a list (this will become
	663	# the names of the targets in the Makefile
	664	bootabletools="$bootabletools $this_script"
	665	#
	666	# Grab the name of the target, strip id number and misc words.
	667	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	668	case $this_script in
	669	kernel) name=linux
	670	;;
	671	esac
[a160d86]	672
	673	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	674
	675	#--------------------------------------------------------------------#
	676	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	677	#--------------------------------------------------------------------#
	678	#
	679	# Drop in the name of the target on a new line, and the previous target
	680	# as a dependency. Also call the echo_message function.
[045b2dc]	681	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	682	#
[a160d86]	683	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	684	# Insert instructions for unpacking the package and changing directories
	685	#
[f546320]	686	if [ "$pkg_tarball" != "" ] ; then
	687	if [ "${INSTALL_LOG}" = "y" ] ; then
	688	CHROOT_wrt_LogNewFiles "$name"
	689	fi
	690	CHROOT_Unpack "$pkg_tarball"
	691	fi
[877cc6a]	692	#
	693	# Select a script execution method
	694	case $this_script in
[045b2dc]	695	fstab) if [[ -n "$FSTAB" ]]; then
	696	CHROOT_wrt_CopyFstab
	697	else
	698	CHROOT_wrt_RunAsRoot "${file}"
	699	fi
	700	;;
	701	*) CHROOT_wrt_RunAsRoot "${file}"
	702	;;
[877cc6a]	703	esac
	704	#
[f546320]	705	# Write installed files log and remove the build directory(ies)
	706	# except if the package build fails.
	707	if [ "$pkg_tarball" != "" ] ; then
	708	CHROOT_wrt_RemoveBuildDirs "$name"
	709	if [ "${INSTALL_LOG}" = "y" ] ; then
	710	CHROOT_wrt_LogNewFiles "$name"
	711	fi
	712	fi
[877cc6a]	713	#
	714	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	715	wrt_touch
[877cc6a]	716	#
	717	#--------------------------------------------------------------------#
	718	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	719	#--------------------------------------------------------------------#
	720	#
	721	# Keep the script file name for Makefile dependencies.
	722	PREV=$this_script
	723
	724	done
	725
	726	}
	727
	728
[045b2dc]	729	#--------------------------------------#
	730	build_Makefile() { # Construct a Makefile from the book scripts
	731	#--------------------------------------#
	732	#
	733	# Script crashes if error trapping is on
	734	#
	735	set +e
	736	declare -f method_cmds
	737	set -e
	738
	739	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	740
	741	cd $JHALFSDIR/${PROGNAME}-commands
[045b2dc]	742	# Start with a clean files
	743	>$MKFILE
[877cc6a]	744	>$MKFILE.tmp
	745
[d55a1a1]	746	method_cmds=${METHOD}_Makefiles
[045b2dc]	747
	748	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
	749	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	750	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	751	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	752	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	753	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	754	fi
[d55a1a1]	755	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	756	# Add the iterations targets, if needed
	757	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	758	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
	759	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	760
[3e7ceed]	761	# Add the CUSTOM_TOOLS targets, if needed
	762	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	763	# Add the BLFS_TOOL targets, if needed
	764	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
	765
[877cc6a]	766	# Add a header, some variables and include the function file
	767	# to the top of the real Makefile.
[195ed9f]	768	wrt_Makefile_header
[877cc6a]	769
	770	# Add chroot commands
	771	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	772	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	773	chroot=`cat chroot/chroot \| \
	774	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	775	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	776	-e '/^export/d' \
	777	-e '/^logout/d' \
	778	-e 's@ \\\@ @g' \| \
	779	tr -d '\n' \| \
	780	sed -e 's/ */ /g' \
	781	-e 's\|\\$\|&&\|g' \
	782	-e 's\|exit\|\|g' \
	783	-e 's\|$\| -c\|' \
[f4d9a48]	784	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	785	-e 's\|set -e\|\|' \
	786	-e 's\|set +h\|\|'`
[877cc6a]	787	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	788	fi
	789
[045b2dc]	790	################## CHROOT ####################
	791
[877cc6a]	792	if [[ "${METHOD}" = "chroot" ]]; then
	793	(
[045b2dc]	794	cat << EOF
[877cc6a]	795
[3e7ceed]	796	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	797	@sudo make do-housekeeping
[936efa8]	798	@echo "$VERSION - jhalfs build" > clfs-release && \\
	799	sudo mv clfs-release \$(MOUNT_PT)/etc
[045b2dc]	800	@\$(call echo_finished,$VERSION)
[a160d86]	801
[045b2dc]	802	ck_UID:
	803	@if [ \`id -u\` = "0" ]; then \\
	804	echo "+--------------------------------------------------+"; \\
	805	echo "\|You cannot run this makefile from the root account\|"; \\
	806	echo "+--------------------------------------------------+"; \\
	807	exit 1; \\
	808	fi
	809
	810	#---------------AS ROOT
	811	mk_SETUP:
	812	@\$(call echo_SU_request)
[7a43320]	813	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	814	@touch \$@
	815
	816	#---------------AS LUSER
	817	mk_CROSS: mk_SETUP
	818	@\$(call echo_PHASE,Cross and Temporary Tools)
[7a43320]	819	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	820	@sudo make restore-luser-env
	821	@touch \$@
	822
	823	mk_SUDO: mk_CROSS
[7a43320]	824	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	825	@touch \$@
	826
	827	#---------------CHROOT JAIL
	828	mk_SYSTOOLS: mk_SUDO
	829	@\$(call echo_CHROOT_request)
	830	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	831	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	832	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	833	@touch \$@
[877cc6a]	834
[3e7ceed]	835	mk_CUSTOM_TOOLS: create-sbu_du-report
	836	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	837	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	838	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	839	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	840	fi;
	841	@touch \$@
	842
	843	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
[c10570d]	844	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
[79da297]	845	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
[c10570d]	846	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
[7a43320]	847	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"; \\
[1838bc7]	848	fi;
[c10570d]	849	@touch \$@
[045b2dc]	850
[6c1b96b]	851	SETUP: $host_prep
	852	AS_LUSER: $cross_tools $temptools
	853	SUDO: $orphan_scripts
	854	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	855	PREP_CHROOT_JAIL: ${chroottools}
	856	CHROOT_JAIL: SHELL=/tools/bin/bash
	857	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	858	CUSTOM_TOOLS: $custom_list
	859	BLFS_TOOL: $blfs_tool
[877cc6a]	860
[1838bc7]	861
	862	create-sbu_du-report: mk_SYSTOOLS
	863	@\$(call echo_message, Building)
	864	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	865	./create-sbu_du-report.sh logs $VERSION; \\
	866	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	867	fi;
	868	@touch \$@
	869
[7d9a82d]	870	do-housekeeping:
[4524fb2]	871	@-umount \$(MOUNT_PT)/dev/pts
	872	@-umount \$(MOUNT_PT)/dev/shm
	873	@-umount \$(MOUNT_PT)/dev
	874	@-umount \$(MOUNT_PT)/sys
	875	@-umount \$(MOUNT_PT)/proc
[045b2dc]	876	@-rm /tools /cross-tools
[6ad5a2f]	877	@-if [ ! -f luser-exist ]; then \\
	878	userdel \$(LUSER); \\
[962793a]	879	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	880	fi;
	881
[877cc6a]	882	EOF
	883	) >> $MKFILE
[045b2dc]	884
[877cc6a]	885	fi
	886
[045b2dc]	887	################### BOOT #####################
[877cc6a]	888
	889	if [[ "${METHOD}" = "boot" ]]; then
	890	(
[045b2dc]	891	cat << EOF
[877cc6a]	892
[045b2dc]	893	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
	894	@sudo make restore-luser-env
	895	@sudo make do-housekeeping
[877cc6a]	896	@\$(call echo_boot_finished,$VERSION)
	897
[3e7ceed]	898	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	899	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	900	@\$(call echo_finished,$VERSION)
	901
	902
[045b2dc]	903	ck_UID:
	904	@if [ \`id -u\` = "0" ]; then \\
	905	echo "+--------------------------------------------------+"; \\
	906	echo "\|You cannot run this makefile from the root account\|"; \\
	907	echo "\|However, if this is the boot environment \|"; \\
	908	echo "\| the command you are looking for is \|"; \\
	909	echo "\| make makesys \|"; \\
	910	echo "\| to finish off the build \|"; \\
	911	echo "+--------------------------------------------------+"; \\
	912	exit 1; \\
	913	fi
[877cc6a]	914
[045b2dc]	915	#---------------AS ROOT
[877cc6a]	916
[045b2dc]	917	mk_SETUP:
	918	@\$(call echo_SU_request)
[7a43320]	919	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	920	@touch \$@
	921
	922	#---------------AS LUSER
[a160d86]	923
[045b2dc]	924	mk_CROSS: mk_SETUP
	925	@\$(call echo_PHASE,Cross Tool)
[7a43320]	926	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	927	@touch \$@
	928
[c10570d]	929	mk_SUDO: mk_CROSS
[7a43320]	930	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	931	@touch \$@
	932
	933	#---------------AS ROOT
	934
	935	mk_FINAL:
	936	@\$(call echo_PHASE,Final System)
[7a43320]	937	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	938	@touch \$@
	939
[3e7ceed]	940	mk_CUSTOM_TOOLS: mk_FINAL
	941	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	942	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	943	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	944	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	945	fi;
	946	@touch \$@
	947
	948	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
[c10570d]	949	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
[79da297]	950	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
[3bc6078]	951	mkdir -p $TRACKING_DIR; \\
[7a43320]	952	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL ); \\
[c10570d]	953	fi
	954	@touch \$@
	955
[3e7ceed]	956	SETUP: $host_prep
	957	AS_LUSER: $cross_tools $temptools ${boottools}
	958	SUDO: $orphan_scripts
[aec4483]	959	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	960	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	961	CUSTOM_TOOLS: $custom_list
	962	BLFS_TOOL: $blfs_tool
[045b2dc]	963
	964	do-housekeeping:
	965	@-rm /tools /cross-tools
	966	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	967	userdel \$(LUSER); \\
[962793a]	968	rm -rf \$(LUSER_HOME); \\
[877cc6a]	969	fi;
	970
[045b2dc]	971	EOF
	972	) >> $MKFILE
	973	fi
	974
	975	(
	976	cat << EOF
	977
[6ad5a2f]	978	restore-luser-env:
[877cc6a]	979	@\$(call echo_message, Building)
[962793a]	980	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	981	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	982	fi;
[962793a]	983	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	984	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	985	fi;
[962793a]	986	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	987	touch \$@ && \\
	988	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	989	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	990
[045b2dc]	991	########################################################
	992
[7d9a82d]	993
[877cc6a]	994	EOF
	995	) >> $MKFILE
	996
	997	# Bring over the items from the Makefile.tmp
	998	cat $MKFILE.tmp >> $MKFILE
	999	rm $MKFILE.tmp
	1000
[045b2dc]	1001	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1002	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: