Context Navigation

source: CLFS/master.sh@ abc8b27

2.4 ablfs-more legacy new_features trunk

Last change on this file since abc8b27 was f0de954, checked in by Pierre Labastie <pierre@…>, 10 years ago
CLFS puts fstab in config and not anymore in bootable. Thanks to Chris Staub for the report.
Property mode set to `100644`
File size: 43.1 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[269d81c]	21	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[269d81c]	28	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	38	mkdir -pv \$(LUSER_HOME); \\
	39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	40	else \\
[269d81c]	41	touch luser-exist; \\
	42	fi
	43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	46	chmod a+wt \$(SRCSDIR)
	47	@\$(call housekeeping)
[877cc6a]	48
	49	026-settingenvironment: 025-addinguser
	50	@\$(call echo_message, Building)
[962793a]	51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	53	fi
[962793a]	54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	56	fi;
[962793a]	57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	67	EOF
	68	) >> $MKFILE.tmp
	69	if ! [ -e final-preps/*variables ]; then
	70	(
	71	cat << EOF
[962793a]	72	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	73	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	74	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	75	EOF
	76	) >> $MKFILE.tmp
	77	fi
	78	(
	79	cat << EOF
[962793a]	80	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	81	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	82	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	83	if [ -d \$(MOUNT_PT)/var ]; then \\
	84	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	85	fi && \\
[877cc6a]	86	touch envars && \\
[e18f80a]	87	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	88	@\$(call housekeeping)
[877cc6a]	89	EOF
	90	) >> $MKFILE.tmp
[045b2dc]	91	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	92
	93	}
	94
[3f83cb0]	95	#--------------------------------------#
	96	final_preps_Makefiles() {
	97	#--------------------------------------#
	98	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
	99	for file in final-preps/* ; do
	100	this_script=`basename $file`
	101	case $this_script in
	102	*variables )
	103	;;
	104	*) continue; ;;
	105	esac
	106	# Set the dependency for the first target.
	107	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	108
	109	# First append each name of the script files to a list (this will become
	110	# the names of the targets in the Makefile
	111	final_preps="$final_preps $this_script"
	112
	113	# No need to grab the package name
	114
	115	LUSER_wrt_target "${this_script}" "$PREV"
	116	LUSER_wrt_RunAsUser "${file}"
	117	wrt_touch
	118	PREV=$this_script
	119	done # for file in ....
	120	}
	121
[045b2dc]	122	#--------------------------------------#
	123	cross_tools_Makefiles() { #
	124	#--------------------------------------#
	125	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	126
	127	for file in cross-tools/* ; do
	128	# Keep the script file name
	129	this_script=`basename $file`
	130	#
	131	# Skip this script...
	132	case $this_script in
	133	cflags \| variables ) # work done in host_prep_Makefiles
	134	continue; ;;
	135	*) ;;
	136	esac
	137	#
	138	# Set the dependency for the first target.
	139	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	140
	141	# First append each name of the script files to a list (this will become
	142	# the names of the targets in the Makefile
	143	cross_tools="$cross_tools $this_script"
	144
	145	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	146	# and binutils in chapter 5)
	147	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	148	-e 's@-static@@' \
	149	-e 's@-final@@' \
[480295c]	150	-e 's@-64@@' \
[877cc6a]	151	-e 's@-n32@@'`
[a160d86]	152	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	153
	154	#--------------------------------------------------------------------#
	155	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	156	#--------------------------------------------------------------------#
	157	#
	158	# Drop in the name of the target on a new line, and the previous target
	159	# as a dependency. Also call the echo_message function.
[045b2dc]	160	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	161	#
[a160d86]	162	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	163	#
[045b2dc]	164	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	165	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	166	#
[045b2dc]	167	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	168	#
[045b2dc]	169	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	170	#
	171	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	172	wrt_touch
[877cc6a]	173	#
	174	#--------------------------------------------------------------------#
	175	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	176	#--------------------------------------------------------------------#
	177	#
	178	# Keep the script file name for Makefile dependencies.
	179	PREV=$this_script
	180
	181	done # for file in ....
	182	}
	183
[045b2dc]	184	#--------------------------------------#
	185	temptools_Makefiles() { #
	186	#--------------------------------------#
	187	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	188
	189	for file in temp-system/* ; do
	190	# Keep the script file name
	191	this_script=`basename $file`
[6f2cd96]	192	#
	193	# Deal with any odd scripts..
	194	case $this_script in
	195	*choose) # The choose script will fail if you cannot enter the new environment
	196	# If the 'boot' build method was chosen don't run the script
	197	[[ $METHOD = "boot" ]] && continue; ;;
	198	*) ;;
	199	esac
[e2ec07a]	200
[877cc6a]	201	#
	202	# First append each name of the script files to a list (this will become
	203	# the names of the targets in the Makefile
	204	temptools="$temptools $this_script"
	205
	206	#
	207	# Grab the name of the target, strip id number, XXX-script
	208	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	209	#
[a160d86]	210	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	211
	212	#--------------------------------------------------------------------#
	213	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	214	#--------------------------------------------------------------------#
	215	#
	216	# Drop in the name of the target on a new line, and the previous target
	217	# as a dependency. Also call the echo_message function.
[045b2dc]	218	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	219	#
[a160d86]	220	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	221	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	222	#
[045b2dc]	223	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	224	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	225	#
[045b2dc]	226	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	227	#
[045b2dc]	228	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	229	#
	230	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	231	wrt_touch
[877cc6a]	232	#
	233	#--------------------------------------------------------------------#
	234	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	235	#--------------------------------------------------------------------#
	236	#
	237	# Keep the script file name for Makefile dependencies.
	238	PREV=$this_script
	239	done # for file in ....
	240	}
	241
	242
[045b2dc]	243	#--------------------------------------#
	244	chroot_Makefiles() { #
	245	#--------------------------------------#
	246	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	247
[045b2dc]	248	for file in chroot/* ; do
[877cc6a]	249	# Keep the script file name
	250	this_script=`basename $file`
[045b2dc]	251	#
	252	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	253	case $this_script in
[045b2dc]	254	chroot) continue ;;
[877cc6a]	255	esac
[045b2dc]	256
[877cc6a]	257	#
	258	# First append each name of the script files to a list (this will become
	259	# the names of the targets in the Makefile
[045b2dc]	260	case "${this_script}" in
	261	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	262	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	263	esac
[045b2dc]	264
	265	# Grab the name of the target, strip id number, XXX-script
	266	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	267
[a160d86]	268	pkg_tarball=$(get_package_tarball_name $name)
	269
[045b2dc]	270	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	271	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	272	# .. Customized makefile entry
	273	case "${this_script}" in
	274	*util-linux)
	275	LUSER_wrt_target "${this_script}" "$PREV"
	276	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	277	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	278	LUSER_wrt_RunAsUser "${file}"
	279	LUSER_RemoveBuildDirs "${name}"
	280	wrt_touch
[480295c]	281	temptools="$temptools $this_script"
	282	continue ;;
[608fbe1]	283	*util-linux-ng)
	284	LUSER_wrt_target "${this_script}" "$PREV"
	285	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	286	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	287	LUSER_wrt_RunAsUser "${file}"
	288	LUSER_RemoveBuildDirs "${name}"
	289	wrt_touch
	290	temptools="$temptools $this_script"
	291	continue ;;
	292	*util-linux-libs)
	293	LUSER_wrt_target "${this_script}" "$PREV"
	294	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	295	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	296	LUSER_wrt_RunAsUser "${file}"
	297	LUSER_RemoveBuildDirs "${name}"
	298	wrt_touch
	299	temptools="$temptools $this_script"
	300	continue ;;
	301	*e2fsprogs)
	302	LUSER_wrt_target "${this_script}" "$PREV"
	303	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	304	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	305	LUSER_wrt_RunAsUser "${file}"
	306	LUSER_RemoveBuildDirs "${name}"
	307	wrt_touch
	308	temptools="$temptools $this_script"
	309	continue ;;
	310	*e2fsprogs-libs)
	311	LUSER_wrt_target "${this_script}" "$PREV"
	312	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	313	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	314	LUSER_wrt_RunAsUser "${file}"
	315	LUSER_RemoveBuildDirs "${name}"
	316	wrt_touch
	317	temptools="$temptools $this_script"
	318	continue ;;
[045b2dc]	319	esac
	320
	321
[877cc6a]	322	#--------------------------------------------------------------------#
	323	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	324	#--------------------------------------------------------------------#
	325	#
	326	# Drop in the name of the target on a new line, and the previous target
	327	# as a dependency. Also call the echo_message function.
[045b2dc]	328	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	329	#
[a160d86]	330	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	331	# Insert instructions for unpacking the package and changing directories
	332	#
[045b2dc]	333	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	334	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	335	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	336	fi
[877cc6a]	337	#
	338	# Select a script execution method
	339	case $this_script in
[8f2c086]	340	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	341	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	342	esac
	343	#
[045b2dc]	344	# Housekeeping...remove the build directory(ies), except if the package build fails.
	345	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	346	#
	347	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	348	wrt_touch
[877cc6a]	349	#
	350	#--------------------------------------------------------------------#
	351	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	352	#--------------------------------------------------------------------#
	353	#
	354	# Keep the script file name for Makefile dependencies.
	355	PREV=$this_script
	356
[045b2dc]	357	done # for file in...
[877cc6a]	358	}
	359
	360
[045b2dc]	361	#--------------------------------------#
	362	boot_Makefiles() { #
	363	#--------------------------------------#
[877cc6a]	364
[045b2dc]	365	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	366	#
	367	# Create a target bootable partition containing a compile environment. Later
	368	# on we boot into this environment and contine the build.
	369	#
	370	for file in boot/* ; do
[877cc6a]	371	# Keep the script file name
	372	this_script=`basename $file`
[045b2dc]	373
	374	# A little housekeeping on the scripts
[877cc6a]	375	case $this_script in
[f940c29]	376	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	377	how-to-view) continue ;;
[045b2dc]	378	whatnext) continue ;;
	379	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	380	*kernel) # if there is no kernel config file do not build the kernel
	381	[[ -z $CONFIG ]] && continue
	382	# Copy the config file to /sources with a standardized name
	383	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	384	;;
[877cc6a]	385	esac
	386	#
	387	# First append each name of the script files to a list (this will become
[179ae85]	388	# the names of the targets in the Makefile). Those names differ depending
	389	# on the version of the book. What makes the difference between those
	390	# versions is the presence of "how-to-view" in the boot chapter.
	391	if [ -f boot/*how-to-view ]; then
	392	case "${this_script}" in
	393	*changingowner)
	394	orphan_scripts="${orphan_scripts} ${this_script}"
	395	;;
	396	*creatingdirs)
	397	orphan_scripts="${orphan_scripts} ${this_script}"
	398	;;
	399	*createfiles)
	400	orphan_scripts="${orphan_scripts} ${this_script}"
	401	;;
	402	*devices)
	403	orphan_scripts="${orphan_scripts} ${this_script}"
	404	;;
	405	*flags)
	406	orphan_scripts="${orphan_scripts} ${this_script}"
	407	;;
	408	*fstab)
	409	orphan_scripts="${orphan_scripts} ${this_script}"
	410	;;
	411	*pwdgroup)
	412	orphan_scripts="${orphan_scripts} ${this_script}"
	413	;;
	414	*settingenvironment)
	415	orphan_scripts="${orphan_scripts} ${this_script}"
	416	;;
	417	*)
	418	boottools="$boottools $this_script"
	419	;;
	420	esac
	421	else
	422	case "${this_script}" in
	423	*changingowner)
	424	orphan_scripts="${orphan_scripts} ${this_script}"
	425	;;
	426	*devices)
	427	orphan_scripts="${orphan_scripts} ${this_script}"
	428	;;
	429	*)
	430	boottools="$boottools $this_script"
	431	;;
	432	esac
	433	fi
[045b2dc]	434	#
	435	# Grab the name of the target, strip id number and misc words.
	436	case $this_script in
[179ae85]	437	*kernel) name=linux ;;
	438	*bootscripts) name="bootscripts-cross-lfs" ;;
	439	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	440	*udev-rules) name="udev-cross-lfs" ;;
	441	*grub-build) name=grub ;;
	442	*-aboot-build) name=aboot ;;
	443	*yaboot-build) name=yaboot ;;
	444	*colo-build) name=colo ;;
	445	*silo-build) name=silo ;;
	446	*arcload-build) name=arcload ;;
	447	*lilo-build) name=lilo ;;
[045b2dc]	448	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	449	esac
	450	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	451	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	452
	453	#--------------------------------------------------------------------#
	454	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	455	#--------------------------------------------------------------------#
	456	#
	457	# Drop in the name of the target on a new line, and the previous target
	458	# as a dependency. Also call the echo_message function.
[045b2dc]	459	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	460	#
[a160d86]	461	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	462	# Insert instructions for unpacking the package and changing directories
	463	#
[045b2dc]	464	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	465	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	466	#
	467	# Select a script execution method
[179ae85]	468	if [ -f boot/*how-to-view ]; then
	469	case $this_script in
	470	# The following 8 scripts are defined in the /boot directory but need
	471	# to be run as a root user. Set them up here but run them in another
	472	# phase
	473	*changingowner) wrt_RunAsRoot "${file}" ;;
	474	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	475	*createfiles) wrt_RunAsRoot "${file}" ;;
	476	*devices) wrt_RunAsRoot "${file}" ;;
	477	*flags) wrt_RunAsRoot "${file}" ;;
	478	*fstab)
	479	if [[ -n "$FSTAB" ]]; then
	480	LUSER_wrt_CopyFstab
	481	else
	482	wrt_RunAsRoot "${file}"
	483	fi
	484	;;
	485	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	486	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	487	*) LUSER_wrt_RunAsUser "${file}" ;;
	488	esac
	489	else
	490	case $this_script in
	491	# The following 2 scripts are defined in the /boot directory but need
	492	# to be run as a root user. Set them up here but run them in another
	493	# phase
	494	*changingowner) wrt_RunAsRoot "${file}" ;;
	495	*devices) wrt_RunAsRoot "${file}" ;;
	496	*fstab)
	497	if [[ -n "$FSTAB" ]]; then
	498	LUSER_wrt_CopyFstab
	499	else
	500	LUSER_wrt_RunAsUser "${file}"
	501	fi
	502	;;
	503	*) LUSER_wrt_RunAsUser "${file}" ;;
	504	esac
	505	fi
[877cc6a]	506	#
[045b2dc]	507	# Housekeeping...remove any build directory(ies) except if the package build fails.
	508	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	509	#
	510	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	511	wrt_touch
[877cc6a]	512	#
	513	#--------------------------------------------------------------------#
	514	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	515	#--------------------------------------------------------------------#
	516	#
	517	# Keep the script file name for Makefile dependencies.
	518	PREV=$this_script
	519
[045b2dc]	520	done
[877cc6a]	521	}
	522
	523
[045b2dc]	524	#--------------------------------------#
[d55a1a1]	525	testsuite_tools_Makefiles() { #
[045b2dc]	526	#--------------------------------------#
[877cc6a]	527
[d55a1a1]	528	if [[ "${METHOD}" = "chroot" ]]; then
	529	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	530	else
	531	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	532	PREV=""
[d55a1a1]	533	fi
[877cc6a]	534
	535	for file in testsuite-tools/* ; do
	536	# Keep the script file name
	537	this_script=`basename $file`
	538
	539	# First append each name of the script files to a list (this will become
	540	# the names of the targets in the Makefile
	541	testsuitetools="$testsuitetools $this_script"
	542
	543	# Grab the name of the target, strip id number, XXX-script
	544	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	545	-e 's@-64bit@@' \
	546	-e 's@-64@@' \
	547	-e 's@64@@' \
	548	-e 's@n32@@'`
	549
[a160d86]	550	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	551
	552	#--------------------------------------------------------------------#
	553	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	554	#--------------------------------------------------------------------#
	555	#
	556	# Drop in the name of the target on a new line, and the previous target
	557	# as a dependency. Also call the echo_message function.
[ca6b261]	558	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	559	#
[ca6b261]	560	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	561	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	562	#
[ca6b261]	563	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	564	#
[ca6b261]	565	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	566	#
	567	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	568	wrt_touch
[877cc6a]	569	#
	570	#--------------------------------------------------------------------#
	571	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	572	#--------------------------------------------------------------------#
	573	#
	574	# Keep the script file name for Makefile dependencies.
	575	PREV=$this_script
	576
	577	done
	578	}
	579
	580
[045b2dc]	581	#--------------------------------------#
[d55a1a1]	582	final_system_Makefiles() { #
[045b2dc]	583	#--------------------------------------#
[45f82718]	584	# Set envars and scripts for iteration targets
	585	if [[ -z "$1" ]] ; then
	586	local N=""
[d55a1a1]	587	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	588	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	589	else
	590	local N=-build_$1
	591	local basicsystem=""
	592	mkdir final-system$N
	593	cp final-system/* final-system$N
	594	for script in final-system$N/* ; do
	595	# Overwrite existing symlinks, files, and dirs
	596	sed -e 's/ln -sv/&f/g' \
	597	-e 's/mv -v/&f/g' \
	598	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	599	# Rename the scripts
	600	mv ${script} ${script}$N
[45f82718]	601	done
[a5f52ba]	602	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	603	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	604	# Delete *old Readline libraries just after make install
[10c8b78]	605	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	606	fi
	607
[d55a1a1]	608	if [[ "${METHOD}" = "chroot" ]]; then
	609	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	610	else
	611	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	612	fi
[877cc6a]	613
[45f82718]	614	for file in final-system$N/* ; do
[877cc6a]	615	# Keep the script file name
	616	this_script=`basename $file`
	617
[45f82718]	618	# Test if the stripping phase must be skipped.
[4384929]	619	# Skip also temp-perl for iterative runs
[877cc6a]	620	case $this_script in
[401f81e]	621	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	622	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	623	esac
	624
[4384929]	625	# Grab the name of the target, strip id number, XXX-script.
	626	# name1 is partially stripped and should be used for logging files.
	627	# name is completely stripped and is used for grabbing
	628	# the package name.
	629	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	630	-e 's,'$N',,'`
	631	name=`echo $name1 \| sed -e 's@temp-@@' \
	632	-e 's@-64bit@@' \
	633	-e 's@-64@@' \
	634	-e 's@64@@' \
	635	-e 's@n32@@'`
[877cc6a]	636
[45f82718]	637	# Find the version of the command files, if it corresponds with the building of
	638	# a specific package. We need this here to can skip scripts not needed for
	639	# iterations rebuilds
[a160d86]	640	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	641
[a160d86]	642	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	643	case "${this_script}" in
	644	stripping) ;;
	645	*) continue ;;
	646	esac
	647	fi
	648
	649	# Append each name of the script files to a list (this will become
	650	# the names of the targets in the Makefile
[10c8b78]	651	basicsystem="$basicsystem ${this_script}"
[45f82718]	652
[877cc6a]	653	#--------------------------------------------------------------------#
	654	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	655	#--------------------------------------------------------------------#
	656	#
	657	# Drop in the name of the target on a new line, and the previous target
	658	# as a dependency. Also call the echo_message function.
[10c8b78]	659	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	660
[a160d86]	661	# If $pkg_tarball isn't empty, we've got a package...
	662	if [ "$pkg_tarball" != "" ] ; then
[f546320]	663	# Touch timestamp file if installed files logs will be created.
	664	# But only for the firt build when running iterative builds.
	665	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	666	CHROOT_wrt_TouchTimestamp
	667	fi
[045b2dc]	668	CHROOT_Unpack "$pkg_tarball"
[a229600]	669	# If the testsuites must be run, initialize the log file
	670	case $name in
[269d81c]	671	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	672	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	673	;;
	674	* )
[10c8b78]	675	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	676	;;
	677	esac
	678	# If using optimizations, write the instructions
[1b65a84]	679	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	680	fi
	681	#
[045b2dc]	682	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	683	#
[f546320]	684	# Write installed files log and remove the build directory(ies)
	685	# except if the package build fails.
	686	if [ "$pkg_tarball" != "" ] ; then
	687	CHROOT_wrt_RemoveBuildDirs "$name"
	688	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	689	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	690	fi
	691	fi
[877cc6a]	692	#
[f546320]	693	# Include a touch of the target name so make can check
	694	# if it's already been made.
[93f38e7]	695	wrt_touch
[877cc6a]	696	#
	697	#--------------------------------------------------------------------#
	698	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	699	#--------------------------------------------------------------------#
	700	#
	701	# Keep the script file name for Makefile dependencies.
[10c8b78]	702	PREV=${this_script}
[45f82718]	703	# Set system_build envar for iteration targets
	704	system_build=$basicsystem
[877cc6a]	705	done # for file in final-system/* ...
	706	}
	707
[045b2dc]	708	#--------------------------------------#
[d55a1a1]	709	bootscripts_Makefiles() { #
[045b2dc]	710	#--------------------------------------#
[d55a1a1]	711
[c6ee8ea]	712	# New versions of the book do not have bootscripts anymore
	713	# (use systemd configuration files)
	714	# Define a variable to be used for the right script directory to parse
	715	if [ -d bootscripts ]; then
	716	config="bootscripts"
	717	else
	718	config="system-config"
	719	fi
	720
[d55a1a1]	721	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	722	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	723	else
[c6ee8ea]	724	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	725	fi
[877cc6a]	726
[c6ee8ea]	727	for file in $config/* ; do
[877cc6a]	728	# Keep the script file name
	729	this_script=`basename $file`
	730
	731	case $this_script in
	732	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	733	console) continue ;; # Use the files that came with the bootscripts
[f0de954]	734	# fstab is now here (for 3.x.y)
	735	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	736	*) ;;
	737	esac
	738
	739	# First append each name of the script files to a list (this will become
	740	# the names of the targets in the Makefile
	741	bootscripttools="$bootscripttools $this_script"
	742
[4384929]	743	# Grab the name of the target, strip id number, XXX-script.
	744	# name1 is partially stripped and should be used for logging files.
	745	# name is completely stripped and is used for grabbing
	746	# the package name.
	747	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	748	name=`echo $name1 \| sed -e 's@-64bit@@' \
	749	-e 's@-64@@' \
	750	-e 's@64@@' \
	751	-e 's@n32@@'`
[877cc6a]	752	case $name in
[c044e3c]	753	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	754	*udev-rules) name=udev-cross-lfs ;;
	755	esac
[c044e3c]	756
[a160d86]	757	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	758
	759	#--------------------------------------------------------------------#
	760	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	761	#--------------------------------------------------------------------#
	762	#
	763	# Drop in the name of the target on a new line, and the previous target
	764	# as a dependency. Also call the echo_message function.
[045b2dc]	765	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	766	#
[a160d86]	767	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	768	#
[f546320]	769	if [ "$pkg_tarball" != "" ] ; then
	770	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	771	CHROOT_wrt_TouchTimestamp
[f546320]	772	fi
	773	CHROOT_Unpack "$pkg_tarball"
	774	fi
[877cc6a]	775	#
[f0de954]	776	case $this_script in
	777	fstab) if [[ -n "$FSTAB" ]]; then
	778	CHROOT_wrt_CopyFstab
	779	else
	780	CHROOT_wrt_RunAsRoot "${file}"
	781	fi
	782	;;
	783	*) CHROOT_wrt_RunAsRoot "${file}"
	784	;;
	785	esac
[877cc6a]	786	#
[f546320]	787	# Write installed files log and remove the build directory(ies)
	788	# except if the package build fails.
	789	if [ "$pkg_tarball" != "" ] ; then
	790	CHROOT_wrt_RemoveBuildDirs "$name"
	791	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	792	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	793	fi
	794	fi
[877cc6a]	795	#
	796	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	797	wrt_touch
[877cc6a]	798	#
	799	#--------------------------------------------------------------------#
	800	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	801	#--------------------------------------------------------------------#
	802	#
	803	# Keep the script file name for Makefile dependencies.
	804	PREV=$this_script
	805
	806	done # for file in bootscripts/* ...
	807	}
	808
[608fbe1]	809	#--------------------------------------#
	810	network_Makefiles() { #
	811	#--------------------------------------#
	812
	813	if [[ "${METHOD}" = "chroot" ]]; then
	814	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	815	else
	816	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	817	fi
	818
	819	for file in network/* ; do
	820	# Keep the script file name
	821	this_script=`basename $file`
	822
	823	case $this_script in
	824	*choose) continue ;; # This is not a script but a commentary.
	825	*dhcp) continue ;; # Assume static networking.
	826	*dhcpcd) continue ;; # Assume static networking.
	827	*) ;;
	828	esac
	829
	830	# First append each name of the script files to a list (this will become
	831	# the names of the targets in the Makefile
	832	networktools="$networktools $this_script"
	833
	834	# Grab the name of the target, strip id number, XXX-script
[4384929]	835	# name1 is partially stripped and should be used for logging files.
	836	# name is completely stripped and is used for grabbing
	837	# the package name.
	838	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	839	name=`echo $name1 \| sed -e 's@-64bit@@' \
	840	-e 's@-64@@' \
	841	-e 's@64@@' \
	842	-e 's@n32@@'`
[608fbe1]	843	case $name in
[b4df9e1]	844	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	845	esac
	846
	847	pkg_tarball=$(get_package_tarball_name $name)
	848
	849	#--------------------------------------------------------------------#
	850	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	851	#--------------------------------------------------------------------#
	852	#
	853	# Drop in the name of the target on a new line, and the previous target
	854	# as a dependency. Also call the echo_message function.
	855	CHROOT_wrt_target "${this_script}" "$PREV"
	856	#
	857	# If $pkg_tarball isn't empty, we've got a package...
	858	#
	859	if [ "$pkg_tarball" != "" ] ; then
	860	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	861	CHROOT_wrt_TouchTimestamp
[608fbe1]	862	fi
	863	CHROOT_Unpack "$pkg_tarball"
	864	fi
	865	#
	866	CHROOT_wrt_RunAsRoot "${file}"
	867	#
	868	# Write installed files log and remove the build directory(ies)
	869	# except if the package build fails.
	870	if [ "$pkg_tarball" != "" ] ; then
	871	CHROOT_wrt_RemoveBuildDirs "$name"
	872	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	873	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	874	fi
	875	fi
	876	#
	877	# Include a touch of the target name so make can check if it's already been made.
	878	wrt_touch
	879	#
	880	#--------------------------------------------------------------------#
	881	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	882	#--------------------------------------------------------------------#
	883	#
	884	# Keep the script file name for Makefile dependencies.
	885	PREV=$this_script
	886
	887	done # for file in network/* ...
	888	}
	889
[045b2dc]	890	#--------------------------------------#
[d55a1a1]	891	bootable_Makefiles() { #
[045b2dc]	892	#--------------------------------------#
[877cc6a]	893
[d55a1a1]	894	if [[ "${METHOD}" = "chroot" ]]; then
	895	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	896	else
	897	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	898	fi
[877cc6a]	899
	900
[936efa8]	901	for file in bootable/* ; do
[877cc6a]	902	# Keep the script file name
	903	this_script=`basename $file`
	904
	905	# A little housekeeping on the scripts
	906	case $this_script in
	907	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	908	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	909	*kernel) # if there is no kernel config file do not build the kernel
	910	[[ -z $CONFIG ]] && continue
	911	# Copy the config file to /sources with a standardized name
	912	cp $CONFIG $BUILDDIR/sources/kernel-config
	913	;;
	914	esac
	915	#
	916	# First append each name of the script files to a list (this will become
	917	# the names of the targets in the Makefile
	918	bootabletools="$bootabletools $this_script"
	919	#
	920	# Grab the name of the target, strip id number and misc words.
	921	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	922	case $this_script in
	923	kernel) name=linux
	924	;;
	925	esac
[a160d86]	926
	927	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	928
	929	#--------------------------------------------------------------------#
	930	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	931	#--------------------------------------------------------------------#
	932	#
	933	# Drop in the name of the target on a new line, and the previous target
	934	# as a dependency. Also call the echo_message function.
[045b2dc]	935	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	936	#
[a160d86]	937	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	938	# Insert instructions for unpacking the package and changing directories
	939	#
[f546320]	940	if [ "$pkg_tarball" != "" ] ; then
	941	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	942	CHROOT_wrt_TouchTimestamp
[f546320]	943	fi
	944	CHROOT_Unpack "$pkg_tarball"
	945	fi
[877cc6a]	946	#
	947	# Select a script execution method
	948	case $this_script in
[045b2dc]	949	fstab) if [[ -n "$FSTAB" ]]; then
	950	CHROOT_wrt_CopyFstab
	951	else
	952	CHROOT_wrt_RunAsRoot "${file}"
	953	fi
	954	;;
	955	*) CHROOT_wrt_RunAsRoot "${file}"
	956	;;
[877cc6a]	957	esac
	958	#
[f546320]	959	# Write installed files log and remove the build directory(ies)
	960	# except if the package build fails.
	961	if [ "$pkg_tarball" != "" ] ; then
	962	CHROOT_wrt_RemoveBuildDirs "$name"
	963	if [ "${INSTALL_LOG}" = "y" ] ; then
	964	CHROOT_wrt_LogNewFiles "$name"
	965	fi
	966	fi
[877cc6a]	967	#
	968	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	969	wrt_touch
[877cc6a]	970	#
	971	#--------------------------------------------------------------------#
	972	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	973	#--------------------------------------------------------------------#
	974	#
	975	# Keep the script file name for Makefile dependencies.
	976	PREV=$this_script
	977
	978	done
	979
	980	}
	981
	982
[045b2dc]	983	#--------------------------------------#
	984	build_Makefile() { # Construct a Makefile from the book scripts
	985	#--------------------------------------#
	986
	987	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	988
	989	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	990	# Start with clean files
[045b2dc]	991	>$MKFILE
[877cc6a]	992	>$MKFILE.tmp
	993
[d55a1a1]	994	method_cmds=${METHOD}_Makefiles
[045b2dc]	995
	996	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
[3f83cb0]	997	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
[045b2dc]	998	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	999	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1000	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1001	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	1002	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	1003	fi
[d55a1a1]	1004	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	1005	# Add the iterations targets, if needed
	1006	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	1007	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[608fbe1]	1008	if [ -d network ]; then
	1009	network_Makefiles # If present, process network setup.
	1010	fi
[d55a1a1]	1011	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	1012
[3e7ceed]	1013	# Add the CUSTOM_TOOLS targets, if needed
	1014	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	1015
[877cc6a]	1016	# Add a header, some variables and include the function file
	1017	# to the top of the real Makefile.
[195ed9f]	1018	wrt_Makefile_header
[877cc6a]	1019
	1020	# Add chroot commands
	1021	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1022	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	1023	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	1024	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	1025	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	1026	-e '/^export/d' \
	1027	-e '/^logout/d' \
	1028	-e 's@ \\\@ @g' \| \
	1029	tr -d '\n' \| \
	1030	sed -e 's/ */ /g' \
	1031	-e 's\|\\$\|&&\|g' \
	1032	-e 's\|exit\|\|g' \
	1033	-e 's\|$\| -c\|' \
[f4d9a48]	1034	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	1035	-e 's\|set -e\|\|' \
	1036	-e 's\|set +h\|\|'`
[877cc6a]	1037	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1038	fi
	1039
[045b2dc]	1040	################## CHROOT ####################
	1041
[877cc6a]	1042	if [[ "${METHOD}" = "chroot" ]]; then
	1043	(
[045b2dc]	1044	cat << EOF
[877cc6a]	1045
[3f83cb0]	1046	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	1047	@sudo make do-housekeeping
[936efa8]	1048	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1049	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1050	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1051	@\$(call echo_finished,$VERSION)
[a160d86]	1052
[045b2dc]	1053	ck_UID:
	1054	@if [ \`id -u\` = "0" ]; then \\
	1055	echo "+--------------------------------------------------+"; \\
	1056	echo "\|You cannot run this makefile from the root account\|"; \\
	1057	echo "+--------------------------------------------------+"; \\
	1058	exit 1; \\
	1059	fi
	1060
	1061	#---------------AS ROOT
	1062	mk_SETUP:
	1063	@\$(call echo_SU_request)
[7a43320]	1064	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1065	@touch \$@
	1066
	1067	#---------------AS LUSER
[3f83cb0]	1068	mk_F_PREPS: mk_SETUP
	1069	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
[730436a]	1070	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1071	@sudo make restore-luser-env
	1072	@touch \$@
	1073
[3f83cb0]	1074	mk_SUDO: mk_F_PREPS
[7a43320]	1075	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1076	@touch \$@
	1077
	1078	#---------------CHROOT JAIL
	1079	mk_SYSTOOLS: mk_SUDO
	1080	@\$(call echo_CHROOT_request)
	1081	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1082	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1083	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1084	@touch \$@
[877cc6a]	1085
[269d81c]	1086	mk_BLFS_TOOL: create-sbu_du-report
	1087	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1088	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1089	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1090	fi;
	1091	@touch \$@
	1092
	1093	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1094	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1095	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1096	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1097	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1098	fi;
	1099	@touch \$@
	1100
[6c1b96b]	1101	SETUP: $host_prep
[3f83cb0]	1102	AS_LUSER: $final_preps $cross_tools $temptools
[6c1b96b]	1103	SUDO: $orphan_scripts
	1104	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1105	PREP_CHROOT_JAIL: ${chroottools}
	1106	CHROOT_JAIL: SHELL=/tools/bin/bash
	1107	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1108	CUSTOM_TOOLS: $custom_list
[877cc6a]	1109
[1838bc7]	1110
	1111	create-sbu_du-report: mk_SYSTOOLS
	1112	@\$(call echo_message, Building)
	1113	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	1114	./create-sbu_du-report.sh logs $VERSION; \\
	1115	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1116	fi;
	1117	@touch \$@
	1118
[7d9a82d]	1119	do-housekeeping:
[4524fb2]	1120	@-umount \$(MOUNT_PT)/dev/pts
[269d81c]	1121	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
	1122	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1123	umount \$(MOUNT_PT)/\$\$link; \\
	1124	unset link; \\
	1125	else \\
	1126	umount \$(MOUNT_PT)/dev/shm; \\
	1127	fi
[4524fb2]	1128	@-umount \$(MOUNT_PT)/dev
	1129	@-umount \$(MOUNT_PT)/sys
	1130	@-umount \$(MOUNT_PT)/proc
[045b2dc]	1131	@-rm /tools /cross-tools
[6ad5a2f]	1132	@-if [ ! -f luser-exist ]; then \\
	1133	userdel \$(LUSER); \\
[962793a]	1134	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1135	fi;
	1136
[877cc6a]	1137	EOF
	1138	) >> $MKFILE
[045b2dc]	1139
[877cc6a]	1140	fi
	1141
[045b2dc]	1142	################### BOOT #####################
[877cc6a]	1143
	1144	if [[ "${METHOD}" = "boot" ]]; then
	1145	(
[045b2dc]	1146	cat << EOF
[877cc6a]	1147
[3f83cb0]	1148	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
[045b2dc]	1149	@sudo make restore-luser-env
	1150	@sudo make do-housekeeping
[877cc6a]	1151	@\$(call echo_boot_finished,$VERSION)
	1152
[3e7ceed]	1153	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1154	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1155	@\$(call echo_finished,$VERSION)
	1156
	1157
[045b2dc]	1158	ck_UID:
	1159	@if [ \`id -u\` = "0" ]; then \\
	1160	echo "+--------------------------------------------------+"; \\
	1161	echo "\|You cannot run this makefile from the root account\|"; \\
	1162	echo "\|However, if this is the boot environment \|"; \\
	1163	echo "\| the command you are looking for is \|"; \\
	1164	echo "\| make makesys \|"; \\
[730436a]	1165	echo "\| to complete the build \|"; \\
[045b2dc]	1166	echo "+--------------------------------------------------+"; \\
	1167	exit 1; \\
	1168	fi
[877cc6a]	1169
[045b2dc]	1170	#---------------AS ROOT
[877cc6a]	1171
[045b2dc]	1172	mk_SETUP:
	1173	@\$(call echo_SU_request)
[7a43320]	1174	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1175	@touch \$@
	1176
	1177	#---------------AS LUSER
[a160d86]	1178
[3f83cb0]	1179	mk_F_PREPS: mk_SETUP
	1180	@\$(call echo_PHASE,Final Preparations and Cross Tools)
[730436a]	1181	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1182	@touch \$@
	1183
[3f83cb0]	1184	mk_SUDO: mk_F_PREPS
[7a43320]	1185	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1186	@touch \$@
	1187
	1188	#---------------AS ROOT
	1189
	1190	mk_FINAL:
	1191	@\$(call echo_PHASE,Final System)
[7a43320]	1192	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1193	@touch \$@
	1194
[269d81c]	1195	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1196	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1197	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1198	( make -C $BLFS_ROOT/work ); \\
	1199	fi;
	1200	@touch \$@
[269d81c]	1201
	1202	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1203	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1204	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1205	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1206	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1207	fi;
	1208	@touch \$@
	1209
	1210	SETUP: $host_prep
[3f83cb0]	1211	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
[3e7ceed]	1212	SUDO: $orphan_scripts
[aec4483]	1213	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1214	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1215	CUSTOM_TOOLS: $custom_list
[045b2dc]	1216
	1217	do-housekeeping:
	1218	@-rm /tools /cross-tools
	1219	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1220	userdel \$(LUSER); \\
[962793a]	1221	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1222	fi;
	1223
[045b2dc]	1224	EOF
	1225	) >> $MKFILE
	1226	fi
	1227
	1228	(
	1229	cat << EOF
	1230
[6ad5a2f]	1231	restore-luser-env:
[877cc6a]	1232	@\$(call echo_message, Building)
[962793a]	1233	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1234	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1235	fi;
[962793a]	1236	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1237	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1238	fi;
[962793a]	1239	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1240	touch \$@ && \\
	1241	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1242	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1243
[045b2dc]	1244	########################################################
	1245
[7d9a82d]	1246
[877cc6a]	1247	EOF
	1248	) >> $MKFILE
	1249
	1250	# Bring over the items from the Makefile.tmp
	1251	cat $MKFILE.tmp >> $MKFILE
	1252	rm $MKFILE.tmp
	1253
[045b2dc]	1254	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1255	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: