Context Navigation

source: CLFS/master.sh@ ba57e61

2.4 ablfs-more legacy new_features trunk

Last change on this file since ba57e61 was 179ae85, checked in by Pierre Labastie <pierre@…>, 11 years ago
Adapt instructions to new layout for "boot" method, while keeping compatibility with older layouts. Joint work with W. Harrington
Property mode set to `100644`
File size: 41.7 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[269d81c]	21	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[269d81c]	28	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	38	mkdir -pv \$(LUSER_HOME); \\
	39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	40	else \\
[269d81c]	41	touch luser-exist; \\
	42	fi
	43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	46	chmod a+wt \$(SRCSDIR)
	47	@\$(call housekeeping)
[877cc6a]	48
	49	026-settingenvironment: 025-addinguser
	50	@\$(call echo_message, Building)
[962793a]	51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	53	fi
[962793a]	54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	56	fi;
[962793a]	57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	67	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	68	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	69	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
	70	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	71	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	72	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	73	if [ -d \$(MOUNT_PT)/var ]; then \\
	74	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	75	fi && \\
[877cc6a]	76	touch envars && \\
[e18f80a]	77	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	78	@\$(call housekeeping)
[877cc6a]	79	EOF
	80	) >> $MKFILE.tmp
[045b2dc]	81	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	82
	83	}
	84
[045b2dc]	85	#--------------------------------------#
	86	cross_tools_Makefiles() { #
	87	#--------------------------------------#
	88	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	89
	90	for file in cross-tools/* ; do
	91	# Keep the script file name
	92	this_script=`basename $file`
	93	#
	94	# Skip this script...
	95	case $this_script in
	96	cflags \| variables ) # work done in host_prep_Makefiles
	97	continue; ;;
	98	*) ;;
	99	esac
	100	#
	101	# Set the dependency for the first target.
	102	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	103
	104	# First append each name of the script files to a list (this will become
	105	# the names of the targets in the Makefile
	106	cross_tools="$cross_tools $this_script"
	107
	108	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	109	# and binutils in chapter 5)
	110	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	111	-e 's@-static@@' \
	112	-e 's@-final@@' \
[480295c]	113	-e 's@-64@@' \
[877cc6a]	114	-e 's@-n32@@'`
[a160d86]	115	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	116
	117	#--------------------------------------------------------------------#
	118	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	119	#--------------------------------------------------------------------#
	120	#
	121	# Drop in the name of the target on a new line, and the previous target
	122	# as a dependency. Also call the echo_message function.
[045b2dc]	123	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	124	#
[a160d86]	125	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	126	#
[045b2dc]	127	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	128	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	129	#
[045b2dc]	130	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	131	#
[045b2dc]	132	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	133	#
	134	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	135	wrt_touch
[877cc6a]	136	#
	137	#--------------------------------------------------------------------#
	138	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	139	#--------------------------------------------------------------------#
	140	#
	141	# Keep the script file name for Makefile dependencies.
	142	PREV=$this_script
	143
	144	done # for file in ....
	145	}
	146
[045b2dc]	147	#--------------------------------------#
	148	temptools_Makefiles() { #
	149	#--------------------------------------#
	150	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	151
	152	for file in temp-system/* ; do
	153	# Keep the script file name
	154	this_script=`basename $file`
[6f2cd96]	155	#
	156	# Deal with any odd scripts..
	157	case $this_script in
	158	*choose) # The choose script will fail if you cannot enter the new environment
	159	# If the 'boot' build method was chosen don't run the script
	160	[[ $METHOD = "boot" ]] && continue; ;;
	161	*) ;;
	162	esac
[e2ec07a]	163
[877cc6a]	164	#
	165	# First append each name of the script files to a list (this will become
	166	# the names of the targets in the Makefile
	167	temptools="$temptools $this_script"
	168
	169	#
	170	# Grab the name of the target, strip id number, XXX-script
	171	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	172	#
[a160d86]	173	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	174
	175	#--------------------------------------------------------------------#
	176	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	177	#--------------------------------------------------------------------#
	178	#
	179	# Drop in the name of the target on a new line, and the previous target
	180	# as a dependency. Also call the echo_message function.
[045b2dc]	181	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	182	#
[a160d86]	183	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	184	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	185	#
[045b2dc]	186	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	187	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	188	#
[045b2dc]	189	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	190	#
[045b2dc]	191	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	192	#
	193	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	194	wrt_touch
[877cc6a]	195	#
	196	#--------------------------------------------------------------------#
	197	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	198	#--------------------------------------------------------------------#
	199	#
	200	# Keep the script file name for Makefile dependencies.
	201	PREV=$this_script
	202	done # for file in ....
	203	}
	204
	205
[045b2dc]	206	#--------------------------------------#
	207	chroot_Makefiles() { #
	208	#--------------------------------------#
	209	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	210
[045b2dc]	211	for file in chroot/* ; do
[877cc6a]	212	# Keep the script file name
	213	this_script=`basename $file`
[045b2dc]	214	#
	215	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	216	case $this_script in
[045b2dc]	217	chroot) continue ;;
[877cc6a]	218	esac
[045b2dc]	219
[877cc6a]	220	#
	221	# First append each name of the script files to a list (this will become
	222	# the names of the targets in the Makefile
[045b2dc]	223	case "${this_script}" in
	224	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	225	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	226	esac
[045b2dc]	227
	228	# Grab the name of the target, strip id number, XXX-script
	229	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	230
[a160d86]	231	pkg_tarball=$(get_package_tarball_name $name)
	232
[045b2dc]	233	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	234	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	235	# .. Customized makefile entry
	236	case "${this_script}" in
	237	*util-linux)
	238	LUSER_wrt_target "${this_script}" "$PREV"
	239	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	240	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	241	LUSER_wrt_RunAsUser "${file}"
	242	LUSER_RemoveBuildDirs "${name}"
	243	wrt_touch
[480295c]	244	temptools="$temptools $this_script"
	245	continue ;;
[608fbe1]	246	*util-linux-ng)
	247	LUSER_wrt_target "${this_script}" "$PREV"
	248	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	249	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	250	LUSER_wrt_RunAsUser "${file}"
	251	LUSER_RemoveBuildDirs "${name}"
	252	wrt_touch
	253	temptools="$temptools $this_script"
	254	continue ;;
	255	*util-linux-libs)
	256	LUSER_wrt_target "${this_script}" "$PREV"
	257	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	258	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	259	LUSER_wrt_RunAsUser "${file}"
	260	LUSER_RemoveBuildDirs "${name}"
	261	wrt_touch
	262	temptools="$temptools $this_script"
	263	continue ;;
	264	*e2fsprogs)
	265	LUSER_wrt_target "${this_script}" "$PREV"
	266	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	267	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	268	LUSER_wrt_RunAsUser "${file}"
	269	LUSER_RemoveBuildDirs "${name}"
	270	wrt_touch
	271	temptools="$temptools $this_script"
	272	continue ;;
	273	*e2fsprogs-libs)
	274	LUSER_wrt_target "${this_script}" "$PREV"
	275	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	276	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	277	LUSER_wrt_RunAsUser "${file}"
	278	LUSER_RemoveBuildDirs "${name}"
	279	wrt_touch
	280	temptools="$temptools $this_script"
	281	continue ;;
[045b2dc]	282	esac
	283
	284
[877cc6a]	285	#--------------------------------------------------------------------#
	286	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	287	#--------------------------------------------------------------------#
	288	#
	289	# Drop in the name of the target on a new line, and the previous target
	290	# as a dependency. Also call the echo_message function.
[045b2dc]	291	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	292	#
[a160d86]	293	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	294	# Insert instructions for unpacking the package and changing directories
	295	#
[045b2dc]	296	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	297	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	298	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	299	fi
[877cc6a]	300	#
	301	# Select a script execution method
	302	case $this_script in
[8f2c086]	303	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	304	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	305	esac
	306	#
[045b2dc]	307	# Housekeeping...remove the build directory(ies), except if the package build fails.
	308	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	309	#
	310	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	311	wrt_touch
[877cc6a]	312	#
	313	#--------------------------------------------------------------------#
	314	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	315	#--------------------------------------------------------------------#
	316	#
	317	# Keep the script file name for Makefile dependencies.
	318	PREV=$this_script
	319
[045b2dc]	320	done # for file in...
[877cc6a]	321	}
	322
	323
[045b2dc]	324	#--------------------------------------#
	325	boot_Makefiles() { #
	326	#--------------------------------------#
[877cc6a]	327
[045b2dc]	328	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	329	#
	330	# Create a target bootable partition containing a compile environment. Later
	331	# on we boot into this environment and contine the build.
	332	#
	333	for file in boot/* ; do
[877cc6a]	334	# Keep the script file name
	335	this_script=`basename $file`
[045b2dc]	336
	337	# A little housekeeping on the scripts
[877cc6a]	338	case $this_script in
[f940c29]	339	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	340	how-to-view) continue ;;
[045b2dc]	341	whatnext) continue ;;
	342	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	343	*kernel) # if there is no kernel config file do not build the kernel
	344	[[ -z $CONFIG ]] && continue
	345	# Copy the config file to /sources with a standardized name
	346	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	347	;;
[877cc6a]	348	esac
	349	#
	350	# First append each name of the script files to a list (this will become
[179ae85]	351	# the names of the targets in the Makefile). Those names differ depending
	352	# on the version of the book. What makes the difference between those
	353	# versions is the presence of "how-to-view" in the boot chapter.
	354	if [ -f boot/*how-to-view ]; then
	355	case "${this_script}" in
	356	*changingowner)
	357	orphan_scripts="${orphan_scripts} ${this_script}"
	358	;;
	359	*creatingdirs)
	360	orphan_scripts="${orphan_scripts} ${this_script}"
	361	;;
	362	*createfiles)
	363	orphan_scripts="${orphan_scripts} ${this_script}"
	364	;;
	365	*devices)
	366	orphan_scripts="${orphan_scripts} ${this_script}"
	367	;;
	368	*flags)
	369	orphan_scripts="${orphan_scripts} ${this_script}"
	370	;;
	371	*fstab)
	372	orphan_scripts="${orphan_scripts} ${this_script}"
	373	;;
	374	*pwdgroup)
	375	orphan_scripts="${orphan_scripts} ${this_script}"
	376	;;
	377	*settingenvironment)
	378	orphan_scripts="${orphan_scripts} ${this_script}"
	379	;;
	380	*)
	381	boottools="$boottools $this_script"
	382	;;
	383	esac
	384	else
	385	case "${this_script}" in
	386	*changingowner)
	387	orphan_scripts="${orphan_scripts} ${this_script}"
	388	;;
	389	*devices)
	390	orphan_scripts="${orphan_scripts} ${this_script}"
	391	;;
	392	*)
	393	boottools="$boottools $this_script"
	394	;;
	395	esac
	396	fi
[045b2dc]	397	#
	398	# Grab the name of the target, strip id number and misc words.
	399	case $this_script in
[179ae85]	400	*kernel) name=linux ;;
	401	*bootscripts) name="bootscripts-cross-lfs" ;;
	402	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	403	*udev-rules) name="udev-cross-lfs" ;;
	404	*grub-build) name=grub ;;
	405	*-aboot-build) name=aboot ;;
	406	*yaboot-build) name=yaboot ;;
	407	*colo-build) name=colo ;;
	408	*silo-build) name=silo ;;
	409	*arcload-build) name=arcload ;;
	410	*lilo-build) name=lilo ;;
[045b2dc]	411	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	412	esac
	413	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	414	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	415
	416	#--------------------------------------------------------------------#
	417	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	418	#--------------------------------------------------------------------#
	419	#
	420	# Drop in the name of the target on a new line, and the previous target
	421	# as a dependency. Also call the echo_message function.
[045b2dc]	422	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	423	#
[a160d86]	424	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	425	# Insert instructions for unpacking the package and changing directories
	426	#
[045b2dc]	427	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	428	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	429	#
	430	# Select a script execution method
[179ae85]	431	if [ -f boot/*how-to-view ]; then
	432	case $this_script in
	433	# The following 8 scripts are defined in the /boot directory but need
	434	# to be run as a root user. Set them up here but run them in another
	435	# phase
	436	*changingowner) wrt_RunAsRoot "${file}" ;;
	437	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	438	*createfiles) wrt_RunAsRoot "${file}" ;;
	439	*devices) wrt_RunAsRoot "${file}" ;;
	440	*flags) wrt_RunAsRoot "${file}" ;;
	441	*fstab)
	442	if [[ -n "$FSTAB" ]]; then
	443	LUSER_wrt_CopyFstab
	444	else
	445	wrt_RunAsRoot "${file}"
	446	fi
	447	;;
	448	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	449	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	450	*) LUSER_wrt_RunAsUser "${file}" ;;
	451	esac
	452	else
	453	case $this_script in
	454	# The following 2 scripts are defined in the /boot directory but need
	455	# to be run as a root user. Set them up here but run them in another
	456	# phase
	457	*changingowner) wrt_RunAsRoot "${file}" ;;
	458	*devices) wrt_RunAsRoot "${file}" ;;
	459	*fstab)
	460	if [[ -n "$FSTAB" ]]; then
	461	LUSER_wrt_CopyFstab
	462	else
	463	LUSER_wrt_RunAsUser "${file}"
	464	fi
	465	;;
	466	*) LUSER_wrt_RunAsUser "${file}" ;;
	467	esac
	468	fi
[877cc6a]	469	#
[045b2dc]	470	# Housekeeping...remove any build directory(ies) except if the package build fails.
	471	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	472	#
	473	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	474	wrt_touch
[877cc6a]	475	#
	476	#--------------------------------------------------------------------#
	477	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	478	#--------------------------------------------------------------------#
	479	#
	480	# Keep the script file name for Makefile dependencies.
	481	PREV=$this_script
	482
[045b2dc]	483	done
[877cc6a]	484	}
	485
	486
[045b2dc]	487	#--------------------------------------#
[d55a1a1]	488	testsuite_tools_Makefiles() { #
[045b2dc]	489	#--------------------------------------#
[877cc6a]	490
[d55a1a1]	491	if [[ "${METHOD}" = "chroot" ]]; then
	492	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	493	else
	494	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	495	PREV=""
[d55a1a1]	496	fi
[877cc6a]	497
	498	for file in testsuite-tools/* ; do
	499	# Keep the script file name
	500	this_script=`basename $file`
	501
	502	# First append each name of the script files to a list (this will become
	503	# the names of the targets in the Makefile
	504	testsuitetools="$testsuitetools $this_script"
	505
	506	# Grab the name of the target, strip id number, XXX-script
	507	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	508	-e 's@-64bit@@' \
	509	-e 's@-64@@' \
	510	-e 's@64@@' \
	511	-e 's@n32@@'`
	512
[a160d86]	513	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	514
	515	#--------------------------------------------------------------------#
	516	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	517	#--------------------------------------------------------------------#
	518	#
	519	# Drop in the name of the target on a new line, and the previous target
	520	# as a dependency. Also call the echo_message function.
[ca6b261]	521	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	522	#
[ca6b261]	523	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	524	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	525	#
[ca6b261]	526	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	527	#
[ca6b261]	528	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	529	#
	530	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	531	wrt_touch
[877cc6a]	532	#
	533	#--------------------------------------------------------------------#
	534	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	535	#--------------------------------------------------------------------#
	536	#
	537	# Keep the script file name for Makefile dependencies.
	538	PREV=$this_script
	539
	540	done
	541	}
	542
	543
[045b2dc]	544	#--------------------------------------#
[d55a1a1]	545	final_system_Makefiles() { #
[045b2dc]	546	#--------------------------------------#
[45f82718]	547	# Set envars and scripts for iteration targets
	548	if [[ -z "$1" ]] ; then
	549	local N=""
[d55a1a1]	550	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	551	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	552	else
	553	local N=-build_$1
	554	local basicsystem=""
	555	mkdir final-system$N
	556	cp final-system/* final-system$N
	557	for script in final-system$N/* ; do
	558	# Overwrite existing symlinks, files, and dirs
	559	sed -e 's/ln -sv/&f/g' \
	560	-e 's/mv -v/&f/g' \
	561	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	562	# Rename the scripts
	563	mv ${script} ${script}$N
[45f82718]	564	done
[a5f52ba]	565	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	566	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	567	# Delete *old Readline libraries just after make install
[10c8b78]	568	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	569	fi
	570
[d55a1a1]	571	if [[ "${METHOD}" = "chroot" ]]; then
	572	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	573	else
	574	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	575	fi
[877cc6a]	576
[45f82718]	577	for file in final-system$N/* ; do
[877cc6a]	578	# Keep the script file name
	579	this_script=`basename $file`
	580
[45f82718]	581	# Test if the stripping phase must be skipped.
[4384929]	582	# Skip also temp-perl for iterative runs
[877cc6a]	583	case $this_script in
[401f81e]	584	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	585	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	586	esac
	587
[4384929]	588	# Grab the name of the target, strip id number, XXX-script.
	589	# name1 is partially stripped and should be used for logging files.
	590	# name is completely stripped and is used for grabbing
	591	# the package name.
	592	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	593	-e 's,'$N',,'`
	594	name=`echo $name1 \| sed -e 's@temp-@@' \
	595	-e 's@-64bit@@' \
	596	-e 's@-64@@' \
	597	-e 's@64@@' \
	598	-e 's@n32@@'`
[877cc6a]	599
[45f82718]	600	# Find the version of the command files, if it corresponds with the building of
	601	# a specific package. We need this here to can skip scripts not needed for
	602	# iterations rebuilds
[a160d86]	603	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	604
[a160d86]	605	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	606	case "${this_script}" in
	607	stripping) ;;
	608	*) continue ;;
	609	esac
	610	fi
	611
	612	# Append each name of the script files to a list (this will become
	613	# the names of the targets in the Makefile
[10c8b78]	614	basicsystem="$basicsystem ${this_script}"
[45f82718]	615
[877cc6a]	616	#--------------------------------------------------------------------#
	617	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	618	#--------------------------------------------------------------------#
	619	#
	620	# Drop in the name of the target on a new line, and the previous target
	621	# as a dependency. Also call the echo_message function.
[10c8b78]	622	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	623
[a160d86]	624	# If $pkg_tarball isn't empty, we've got a package...
	625	if [ "$pkg_tarball" != "" ] ; then
[f546320]	626	# Touch timestamp file if installed files logs will be created.
	627	# But only for the firt build when running iterative builds.
	628	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	629	CHROOT_wrt_TouchTimestamp
	630	fi
[045b2dc]	631	CHROOT_Unpack "$pkg_tarball"
[a229600]	632	# If the testsuites must be run, initialize the log file
	633	case $name in
[269d81c]	634	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	635	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	636	;;
	637	* )
[10c8b78]	638	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	639	;;
	640	esac
	641	# If using optimizations, write the instructions
[1b65a84]	642	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	643	fi
	644	#
[045b2dc]	645	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	646	#
[f546320]	647	# Write installed files log and remove the build directory(ies)
	648	# except if the package build fails.
	649	if [ "$pkg_tarball" != "" ] ; then
	650	CHROOT_wrt_RemoveBuildDirs "$name"
	651	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	652	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	653	fi
	654	fi
[877cc6a]	655	#
[f546320]	656	# Include a touch of the target name so make can check
	657	# if it's already been made.
[93f38e7]	658	wrt_touch
[877cc6a]	659	#
	660	#--------------------------------------------------------------------#
	661	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	662	#--------------------------------------------------------------------#
	663	#
	664	# Keep the script file name for Makefile dependencies.
[10c8b78]	665	PREV=${this_script}
[45f82718]	666	# Set system_build envar for iteration targets
	667	system_build=$basicsystem
[877cc6a]	668	done # for file in final-system/* ...
	669	}
	670
[045b2dc]	671	#--------------------------------------#
[d55a1a1]	672	bootscripts_Makefiles() { #
[045b2dc]	673	#--------------------------------------#
[d55a1a1]	674
[c6ee8ea]	675	# New versions of the book do not have bootscripts anymore
	676	# (use systemd configuration files)
	677	# Define a variable to be used for the right script directory to parse
	678	if [ -d bootscripts ]; then
	679	config="bootscripts"
	680	else
	681	config="system-config"
	682	fi
	683
[d55a1a1]	684	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	685	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	686	else
[c6ee8ea]	687	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	688	fi
[877cc6a]	689
[c6ee8ea]	690	for file in $config/* ; do
[877cc6a]	691	# Keep the script file name
	692	this_script=`basename $file`
	693
	694	case $this_script in
	695	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	696	console) continue ;; # Use the files that came with the bootscripts
	697	*) ;;
	698	esac
	699
	700	# First append each name of the script files to a list (this will become
	701	# the names of the targets in the Makefile
	702	bootscripttools="$bootscripttools $this_script"
	703
[4384929]	704	# Grab the name of the target, strip id number, XXX-script.
	705	# name1 is partially stripped and should be used for logging files.
	706	# name is completely stripped and is used for grabbing
	707	# the package name.
	708	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	709	name=`echo $name1 \| sed -e 's@-64bit@@' \
	710	-e 's@-64@@' \
	711	-e 's@64@@' \
	712	-e 's@n32@@'`
[877cc6a]	713	case $name in
[c044e3c]	714	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	715	*udev-rules) name=udev-cross-lfs ;;
	716	esac
[c044e3c]	717
[a160d86]	718	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	719
	720	#--------------------------------------------------------------------#
	721	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	722	#--------------------------------------------------------------------#
	723	#
	724	# Drop in the name of the target on a new line, and the previous target
	725	# as a dependency. Also call the echo_message function.
[045b2dc]	726	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	727	#
[a160d86]	728	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	729	#
[f546320]	730	if [ "$pkg_tarball" != "" ] ; then
	731	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	732	CHROOT_wrt_TouchTimestamp
[f546320]	733	fi
	734	CHROOT_Unpack "$pkg_tarball"
	735	fi
[877cc6a]	736	#
[045b2dc]	737	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	738	#
[f546320]	739	# Write installed files log and remove the build directory(ies)
	740	# except if the package build fails.
	741	if [ "$pkg_tarball" != "" ] ; then
	742	CHROOT_wrt_RemoveBuildDirs "$name"
	743	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	744	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	745	fi
	746	fi
[877cc6a]	747	#
	748	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	749	wrt_touch
[877cc6a]	750	#
	751	#--------------------------------------------------------------------#
	752	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	753	#--------------------------------------------------------------------#
	754	#
	755	# Keep the script file name for Makefile dependencies.
	756	PREV=$this_script
	757
	758	done # for file in bootscripts/* ...
	759	}
	760
[608fbe1]	761	#--------------------------------------#
	762	network_Makefiles() { #
	763	#--------------------------------------#
	764
	765	if [[ "${METHOD}" = "chroot" ]]; then
	766	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	767	else
	768	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	769	fi
	770
	771	for file in network/* ; do
	772	# Keep the script file name
	773	this_script=`basename $file`
	774
	775	case $this_script in
	776	*choose) continue ;; # This is not a script but a commentary.
	777	*dhcp) continue ;; # Assume static networking.
	778	*dhcpcd) continue ;; # Assume static networking.
	779	*) ;;
	780	esac
	781
	782	# First append each name of the script files to a list (this will become
	783	# the names of the targets in the Makefile
	784	networktools="$networktools $this_script"
	785
	786	# Grab the name of the target, strip id number, XXX-script
[4384929]	787	# name1 is partially stripped and should be used for logging files.
	788	# name is completely stripped and is used for grabbing
	789	# the package name.
	790	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	791	name=`echo $name1 \| sed -e 's@-64bit@@' \
	792	-e 's@-64@@' \
	793	-e 's@64@@' \
	794	-e 's@n32@@'`
[608fbe1]	795	case $name in
[b4df9e1]	796	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	797	esac
	798
	799	pkg_tarball=$(get_package_tarball_name $name)
	800
	801	#--------------------------------------------------------------------#
	802	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	803	#--------------------------------------------------------------------#
	804	#
	805	# Drop in the name of the target on a new line, and the previous target
	806	# as a dependency. Also call the echo_message function.
	807	CHROOT_wrt_target "${this_script}" "$PREV"
	808	#
	809	# If $pkg_tarball isn't empty, we've got a package...
	810	#
	811	if [ "$pkg_tarball" != "" ] ; then
	812	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	813	CHROOT_wrt_TouchTimestamp
[608fbe1]	814	fi
	815	CHROOT_Unpack "$pkg_tarball"
	816	fi
	817	#
	818	CHROOT_wrt_RunAsRoot "${file}"
	819	#
	820	# Write installed files log and remove the build directory(ies)
	821	# except if the package build fails.
	822	if [ "$pkg_tarball" != "" ] ; then
	823	CHROOT_wrt_RemoveBuildDirs "$name"
	824	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	825	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	826	fi
	827	fi
	828	#
	829	# Include a touch of the target name so make can check if it's already been made.
	830	wrt_touch
	831	#
	832	#--------------------------------------------------------------------#
	833	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	834	#--------------------------------------------------------------------#
	835	#
	836	# Keep the script file name for Makefile dependencies.
	837	PREV=$this_script
	838
	839	done # for file in network/* ...
	840	}
	841
[045b2dc]	842	#--------------------------------------#
[d55a1a1]	843	bootable_Makefiles() { #
[045b2dc]	844	#--------------------------------------#
[877cc6a]	845
[d55a1a1]	846	if [[ "${METHOD}" = "chroot" ]]; then
	847	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	848	else
	849	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	850	fi
[877cc6a]	851
	852
[936efa8]	853	for file in bootable/* ; do
[877cc6a]	854	# Keep the script file name
	855	this_script=`basename $file`
	856
	857	# A little housekeeping on the scripts
	858	case $this_script in
	859	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	860	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	861	*kernel) # if there is no kernel config file do not build the kernel
	862	[[ -z $CONFIG ]] && continue
	863	# Copy the config file to /sources with a standardized name
	864	cp $CONFIG $BUILDDIR/sources/kernel-config
	865	;;
	866	esac
	867	#
	868	# First append each name of the script files to a list (this will become
	869	# the names of the targets in the Makefile
	870	bootabletools="$bootabletools $this_script"
	871	#
	872	# Grab the name of the target, strip id number and misc words.
	873	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	874	case $this_script in
	875	kernel) name=linux
	876	;;
	877	esac
[a160d86]	878
	879	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	880
	881	#--------------------------------------------------------------------#
	882	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	883	#--------------------------------------------------------------------#
	884	#
	885	# Drop in the name of the target on a new line, and the previous target
	886	# as a dependency. Also call the echo_message function.
[045b2dc]	887	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	888	#
[a160d86]	889	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	890	# Insert instructions for unpacking the package and changing directories
	891	#
[f546320]	892	if [ "$pkg_tarball" != "" ] ; then
	893	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	894	CHROOT_wrt_TouchTimestamp
[f546320]	895	fi
	896	CHROOT_Unpack "$pkg_tarball"
	897	fi
[877cc6a]	898	#
	899	# Select a script execution method
	900	case $this_script in
[045b2dc]	901	fstab) if [[ -n "$FSTAB" ]]; then
	902	CHROOT_wrt_CopyFstab
	903	else
	904	CHROOT_wrt_RunAsRoot "${file}"
	905	fi
	906	;;
	907	*) CHROOT_wrt_RunAsRoot "${file}"
	908	;;
[877cc6a]	909	esac
	910	#
[f546320]	911	# Write installed files log and remove the build directory(ies)
	912	# except if the package build fails.
	913	if [ "$pkg_tarball" != "" ] ; then
	914	CHROOT_wrt_RemoveBuildDirs "$name"
	915	if [ "${INSTALL_LOG}" = "y" ] ; then
	916	CHROOT_wrt_LogNewFiles "$name"
	917	fi
	918	fi
[877cc6a]	919	#
	920	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	921	wrt_touch
[877cc6a]	922	#
	923	#--------------------------------------------------------------------#
	924	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	925	#--------------------------------------------------------------------#
	926	#
	927	# Keep the script file name for Makefile dependencies.
	928	PREV=$this_script
	929
	930	done
	931
	932	}
	933
	934
[045b2dc]	935	#--------------------------------------#
	936	build_Makefile() { # Construct a Makefile from the book scripts
	937	#--------------------------------------#
	938
	939	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	940
	941	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	942	# Start with clean files
[045b2dc]	943	>$MKFILE
[877cc6a]	944	>$MKFILE.tmp
	945
[d55a1a1]	946	method_cmds=${METHOD}_Makefiles
[045b2dc]	947
	948	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
	949	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	950	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	951	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	952	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	953	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	954	fi
[d55a1a1]	955	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	956	# Add the iterations targets, if needed
	957	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	958	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[608fbe1]	959	if [ -d network ]; then
	960	network_Makefiles # If present, process network setup.
	961	fi
[d55a1a1]	962	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	963
[3e7ceed]	964	# Add the CUSTOM_TOOLS targets, if needed
	965	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	966
[877cc6a]	967	# Add a header, some variables and include the function file
	968	# to the top of the real Makefile.
[195ed9f]	969	wrt_Makefile_header
[877cc6a]	970
	971	# Add chroot commands
	972	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	973	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	974	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	975	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	976	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	977	-e '/^export/d' \
	978	-e '/^logout/d' \
	979	-e 's@ \\\@ @g' \| \
	980	tr -d '\n' \| \
	981	sed -e 's/ */ /g' \
	982	-e 's\|\\$\|&&\|g' \
	983	-e 's\|exit\|\|g' \
	984	-e 's\|$\| -c\|' \
[f4d9a48]	985	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	986	-e 's\|set -e\|\|' \
	987	-e 's\|set +h\|\|'`
[877cc6a]	988	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	989	fi
	990
[045b2dc]	991	################## CHROOT ####################
	992
[877cc6a]	993	if [[ "${METHOD}" = "chroot" ]]; then
	994	(
[045b2dc]	995	cat << EOF
[877cc6a]	996
[3e7ceed]	997	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	998	@sudo make do-housekeeping
[936efa8]	999	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1000	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1001	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1002	@\$(call echo_finished,$VERSION)
[a160d86]	1003
[045b2dc]	1004	ck_UID:
	1005	@if [ \`id -u\` = "0" ]; then \\
	1006	echo "+--------------------------------------------------+"; \\
	1007	echo "\|You cannot run this makefile from the root account\|"; \\
	1008	echo "+--------------------------------------------------+"; \\
	1009	exit 1; \\
	1010	fi
	1011
	1012	#---------------AS ROOT
	1013	mk_SETUP:
	1014	@\$(call echo_SU_request)
[7a43320]	1015	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1016	@touch \$@
	1017
	1018	#---------------AS LUSER
	1019	mk_CROSS: mk_SETUP
	1020	@\$(call echo_PHASE,Cross and Temporary Tools)
[730436a]	1021	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1022	@sudo make restore-luser-env
	1023	@touch \$@
	1024
	1025	mk_SUDO: mk_CROSS
[7a43320]	1026	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1027	@touch \$@
	1028
	1029	#---------------CHROOT JAIL
	1030	mk_SYSTOOLS: mk_SUDO
	1031	@\$(call echo_CHROOT_request)
	1032	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1033	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1034	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1035	@touch \$@
[877cc6a]	1036
[269d81c]	1037	mk_BLFS_TOOL: create-sbu_du-report
	1038	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1039	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1040	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1041	fi;
	1042	@touch \$@
	1043
	1044	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1045	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1046	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1047	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1048	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1049	fi;
	1050	@touch \$@
	1051
[6c1b96b]	1052	SETUP: $host_prep
	1053	AS_LUSER: $cross_tools $temptools
	1054	SUDO: $orphan_scripts
	1055	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1056	PREP_CHROOT_JAIL: ${chroottools}
	1057	CHROOT_JAIL: SHELL=/tools/bin/bash
	1058	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1059	CUSTOM_TOOLS: $custom_list
[877cc6a]	1060
[1838bc7]	1061
	1062	create-sbu_du-report: mk_SYSTOOLS
	1063	@\$(call echo_message, Building)
	1064	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	1065	./create-sbu_du-report.sh logs $VERSION; \\
	1066	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1067	fi;
	1068	@touch \$@
	1069
[7d9a82d]	1070	do-housekeeping:
[4524fb2]	1071	@-umount \$(MOUNT_PT)/dev/pts
[269d81c]	1072	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
	1073	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1074	umount \$(MOUNT_PT)/\$\$link; \\
	1075	unset link; \\
	1076	else \\
	1077	umount \$(MOUNT_PT)/dev/shm; \\
	1078	fi
[4524fb2]	1079	@-umount \$(MOUNT_PT)/dev
	1080	@-umount \$(MOUNT_PT)/sys
	1081	@-umount \$(MOUNT_PT)/proc
[045b2dc]	1082	@-rm /tools /cross-tools
[6ad5a2f]	1083	@-if [ ! -f luser-exist ]; then \\
	1084	userdel \$(LUSER); \\
[962793a]	1085	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1086	fi;
	1087
[877cc6a]	1088	EOF
	1089	) >> $MKFILE
[045b2dc]	1090
[877cc6a]	1091	fi
	1092
[045b2dc]	1093	################### BOOT #####################
[877cc6a]	1094
	1095	if [[ "${METHOD}" = "boot" ]]; then
	1096	(
[045b2dc]	1097	cat << EOF
[877cc6a]	1098
[045b2dc]	1099	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
	1100	@sudo make restore-luser-env
	1101	@sudo make do-housekeeping
[877cc6a]	1102	@\$(call echo_boot_finished,$VERSION)
	1103
[3e7ceed]	1104	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1105	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1106	@\$(call echo_finished,$VERSION)
	1107
	1108
[045b2dc]	1109	ck_UID:
	1110	@if [ \`id -u\` = "0" ]; then \\
	1111	echo "+--------------------------------------------------+"; \\
	1112	echo "\|You cannot run this makefile from the root account\|"; \\
	1113	echo "\|However, if this is the boot environment \|"; \\
	1114	echo "\| the command you are looking for is \|"; \\
	1115	echo "\| make makesys \|"; \\
[730436a]	1116	echo "\| to complete the build \|"; \\
[045b2dc]	1117	echo "+--------------------------------------------------+"; \\
	1118	exit 1; \\
	1119	fi
[877cc6a]	1120
[045b2dc]	1121	#---------------AS ROOT
[877cc6a]	1122
[045b2dc]	1123	mk_SETUP:
	1124	@\$(call echo_SU_request)
[7a43320]	1125	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1126	@touch \$@
	1127
	1128	#---------------AS LUSER
[a160d86]	1129
[045b2dc]	1130	mk_CROSS: mk_SETUP
	1131	@\$(call echo_PHASE,Cross Tool)
[730436a]	1132	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1133	@touch \$@
	1134
[c10570d]	1135	mk_SUDO: mk_CROSS
[7a43320]	1136	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1137	@touch \$@
	1138
	1139	#---------------AS ROOT
	1140
	1141	mk_FINAL:
	1142	@\$(call echo_PHASE,Final System)
[7a43320]	1143	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1144	@touch \$@
	1145
[269d81c]	1146	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1147	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1148	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1149	( make -C $BLFS_ROOT/work ); \\
	1150	fi;
	1151	@touch \$@
[269d81c]	1152
	1153	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1154	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1155	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1156	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1157	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1158	fi;
	1159	@touch \$@
	1160
	1161	SETUP: $host_prep
	1162	AS_LUSER: $cross_tools $temptools ${boottools}
	1163	SUDO: $orphan_scripts
[aec4483]	1164	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1165	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1166	CUSTOM_TOOLS: $custom_list
[045b2dc]	1167
	1168	do-housekeeping:
	1169	@-rm /tools /cross-tools
	1170	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1171	userdel \$(LUSER); \\
[962793a]	1172	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1173	fi;
	1174
[045b2dc]	1175	EOF
	1176	) >> $MKFILE
	1177	fi
	1178
	1179	(
	1180	cat << EOF
	1181
[6ad5a2f]	1182	restore-luser-env:
[877cc6a]	1183	@\$(call echo_message, Building)
[962793a]	1184	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1185	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1186	fi;
[962793a]	1187	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1188	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1189	fi;
[962793a]	1190	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1191	touch \$@ && \\
	1192	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1193	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1194
[045b2dc]	1195	########################################################
	1196
[7d9a82d]	1197
[877cc6a]	1198	EOF
	1199	) >> $MKFILE
	1200
	1201	# Bring over the items from the Makefile.tmp
	1202	cat $MKFILE.tmp >> $MKFILE
	1203	rm $MKFILE.tmp
	1204
[045b2dc]	1205	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1206	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: