Context Navigation

source: CLFS/master.sh@ bd07ef5

2.4 ablfs-more legacy new_features trunk

Last change on this file since bd07ef5 was 82808d1, checked in by Pierre Labastie <pierre@…>, 10 years ago
Fixes addition of "pass1" util-linux in new version of CLFS. Thanks to William Harrington for the patch.
Property mode set to `100644`
File size: 43.2 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[269d81c]	21	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[269d81c]	28	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	38	mkdir -pv \$(LUSER_HOME); \\
	39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	40	else \\
[269d81c]	41	touch luser-exist; \\
	42	fi
	43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	46	chmod a+wt \$(SRCSDIR)
	47	@\$(call housekeeping)
[877cc6a]	48
	49	026-settingenvironment: 025-addinguser
	50	@\$(call echo_message, Building)
[962793a]	51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	53	fi
[962793a]	54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	56	fi;
[962793a]	57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	67	EOF
	68	) >> $MKFILE.tmp
	69	if ! [ -e final-preps/*variables ]; then
	70	(
	71	cat << EOF
[962793a]	72	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	73	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	74	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	75	EOF
	76	) >> $MKFILE.tmp
	77	fi
	78	(
	79	cat << EOF
[962793a]	80	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	81	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	82	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	83	if [ -d \$(MOUNT_PT)/var ]; then \\
	84	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	85	fi && \\
[877cc6a]	86	touch envars && \\
[e18f80a]	87	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	88	@\$(call housekeeping)
[877cc6a]	89	EOF
	90	) >> $MKFILE.tmp
[045b2dc]	91	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	92
	93	}
	94
[3f83cb0]	95	#--------------------------------------#
	96	final_preps_Makefiles() {
	97	#--------------------------------------#
	98	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
	99	for file in final-preps/* ; do
	100	this_script=`basename $file`
	101	case $this_script in
	102	*variables )
	103	;;
	104	*) continue; ;;
	105	esac
	106	# Set the dependency for the first target.
	107	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	108
	109	# First append each name of the script files to a list (this will become
	110	# the names of the targets in the Makefile
	111	final_preps="$final_preps $this_script"
	112
	113	# No need to grab the package name
	114
	115	LUSER_wrt_target "${this_script}" "$PREV"
	116	LUSER_wrt_RunAsUser "${file}"
	117	wrt_touch
	118	PREV=$this_script
	119	done # for file in ....
	120	}
	121
[045b2dc]	122	#--------------------------------------#
	123	cross_tools_Makefiles() { #
	124	#--------------------------------------#
	125	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	126
	127	for file in cross-tools/* ; do
	128	# Keep the script file name
	129	this_script=`basename $file`
	130	#
	131	# Skip this script...
	132	case $this_script in
	133	cflags \| variables ) # work done in host_prep_Makefiles
	134	continue; ;;
	135	*) ;;
	136	esac
	137	#
	138	# Set the dependency for the first target.
	139	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	140
	141	# First append each name of the script files to a list (this will become
	142	# the names of the targets in the Makefile
	143	cross_tools="$cross_tools $this_script"
	144
	145	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	146	# and binutils in chapter 5)
	147	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	148	-e 's@-static@@' \
	149	-e 's@-final@@' \
[480295c]	150	-e 's@-64@@' \
[82808d1]	151	-e 's@-n32@@' \
	152	-e 's@-pass1@@'`
[a160d86]	153	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	154
	155	#--------------------------------------------------------------------#
	156	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	157	#--------------------------------------------------------------------#
	158	#
	159	# Drop in the name of the target on a new line, and the previous target
	160	# as a dependency. Also call the echo_message function.
[045b2dc]	161	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	162	#
[a160d86]	163	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	164	#
[045b2dc]	165	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	166	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	167	#
[045b2dc]	168	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	169	#
[045b2dc]	170	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	171	#
	172	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	173	wrt_touch
[877cc6a]	174	#
	175	#--------------------------------------------------------------------#
	176	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	177	#--------------------------------------------------------------------#
	178	#
	179	# Keep the script file name for Makefile dependencies.
	180	PREV=$this_script
	181
	182	done # for file in ....
	183	}
	184
[045b2dc]	185	#--------------------------------------#
	186	temptools_Makefiles() { #
	187	#--------------------------------------#
	188	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	189
	190	for file in temp-system/* ; do
	191	# Keep the script file name
	192	this_script=`basename $file`
[6f2cd96]	193	#
	194	# Deal with any odd scripts..
	195	case $this_script in
	196	*choose) # The choose script will fail if you cannot enter the new environment
	197	# If the 'boot' build method was chosen don't run the script
	198	[[ $METHOD = "boot" ]] && continue; ;;
	199	*) ;;
	200	esac
[e2ec07a]	201
[877cc6a]	202	#
	203	# First append each name of the script files to a list (this will become
	204	# the names of the targets in the Makefile
	205	temptools="$temptools $this_script"
	206
	207	#
	208	# Grab the name of the target, strip id number, XXX-script
	209	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	210	#
[a160d86]	211	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	212
	213	#--------------------------------------------------------------------#
	214	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	215	#--------------------------------------------------------------------#
	216	#
	217	# Drop in the name of the target on a new line, and the previous target
	218	# as a dependency. Also call the echo_message function.
[045b2dc]	219	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	220	#
[a160d86]	221	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	222	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	223	#
[045b2dc]	224	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	225	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	226	#
[045b2dc]	227	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	228	#
[045b2dc]	229	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	230	#
	231	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	232	wrt_touch
[877cc6a]	233	#
	234	#--------------------------------------------------------------------#
	235	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	236	#--------------------------------------------------------------------#
	237	#
	238	# Keep the script file name for Makefile dependencies.
	239	PREV=$this_script
	240	done # for file in ....
	241	}
	242
	243
[045b2dc]	244	#--------------------------------------#
	245	chroot_Makefiles() { #
	246	#--------------------------------------#
	247	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	248
[045b2dc]	249	for file in chroot/* ; do
[877cc6a]	250	# Keep the script file name
	251	this_script=`basename $file`
[045b2dc]	252	#
	253	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	254	case $this_script in
[045b2dc]	255	chroot) continue ;;
[877cc6a]	256	esac
[045b2dc]	257
[877cc6a]	258	#
	259	# First append each name of the script files to a list (this will become
	260	# the names of the targets in the Makefile
[045b2dc]	261	case "${this_script}" in
	262	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	263	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	264	esac
[045b2dc]	265
	266	# Grab the name of the target, strip id number, XXX-script
	267	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	268
[a160d86]	269	pkg_tarball=$(get_package_tarball_name $name)
	270
[045b2dc]	271	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	272	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	273	# .. Customized makefile entry
	274	case "${this_script}" in
	275	*util-linux)
	276	LUSER_wrt_target "${this_script}" "$PREV"
	277	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	278	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	279	LUSER_wrt_RunAsUser "${file}"
	280	LUSER_RemoveBuildDirs "${name}"
	281	wrt_touch
[480295c]	282	temptools="$temptools $this_script"
	283	continue ;;
[608fbe1]	284	*util-linux-ng)
	285	LUSER_wrt_target "${this_script}" "$PREV"
	286	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	287	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	288	LUSER_wrt_RunAsUser "${file}"
	289	LUSER_RemoveBuildDirs "${name}"
	290	wrt_touch
	291	temptools="$temptools $this_script"
	292	continue ;;
	293	*util-linux-libs)
	294	LUSER_wrt_target "${this_script}" "$PREV"
	295	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	296	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	297	LUSER_wrt_RunAsUser "${file}"
	298	LUSER_RemoveBuildDirs "${name}"
	299	wrt_touch
	300	temptools="$temptools $this_script"
	301	continue ;;
	302	*e2fsprogs)
	303	LUSER_wrt_target "${this_script}" "$PREV"
	304	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	305	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	306	LUSER_wrt_RunAsUser "${file}"
	307	LUSER_RemoveBuildDirs "${name}"
	308	wrt_touch
	309	temptools="$temptools $this_script"
	310	continue ;;
	311	*e2fsprogs-libs)
	312	LUSER_wrt_target "${this_script}" "$PREV"
	313	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	314	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	315	LUSER_wrt_RunAsUser "${file}"
	316	LUSER_RemoveBuildDirs "${name}"
	317	wrt_touch
	318	temptools="$temptools $this_script"
	319	continue ;;
[045b2dc]	320	esac
	321
	322
[877cc6a]	323	#--------------------------------------------------------------------#
	324	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	325	#--------------------------------------------------------------------#
	326	#
	327	# Drop in the name of the target on a new line, and the previous target
	328	# as a dependency. Also call the echo_message function.
[045b2dc]	329	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	330	#
[a160d86]	331	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	332	# Insert instructions for unpacking the package and changing directories
	333	#
[045b2dc]	334	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	335	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	336	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	337	fi
[877cc6a]	338	#
	339	# Select a script execution method
	340	case $this_script in
[8f2c086]	341	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	342	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	343	esac
	344	#
[045b2dc]	345	# Housekeeping...remove the build directory(ies), except if the package build fails.
	346	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	347	#
	348	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	349	wrt_touch
[877cc6a]	350	#
	351	#--------------------------------------------------------------------#
	352	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	353	#--------------------------------------------------------------------#
	354	#
	355	# Keep the script file name for Makefile dependencies.
	356	PREV=$this_script
	357
[045b2dc]	358	done # for file in...
[877cc6a]	359	}
	360
	361
[045b2dc]	362	#--------------------------------------#
	363	boot_Makefiles() { #
	364	#--------------------------------------#
[877cc6a]	365
[045b2dc]	366	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	367	#
	368	# Create a target bootable partition containing a compile environment. Later
	369	# on we boot into this environment and contine the build.
	370	#
	371	for file in boot/* ; do
[877cc6a]	372	# Keep the script file name
	373	this_script=`basename $file`
[045b2dc]	374
	375	# A little housekeeping on the scripts
[877cc6a]	376	case $this_script in
[f940c29]	377	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	378	how-to-view) continue ;;
[045b2dc]	379	whatnext) continue ;;
	380	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	381	*kernel) # if there is no kernel config file do not build the kernel
	382	[[ -z $CONFIG ]] && continue
	383	# Copy the config file to /sources with a standardized name
	384	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	385	;;
[877cc6a]	386	esac
	387	#
	388	# First append each name of the script files to a list (this will become
[179ae85]	389	# the names of the targets in the Makefile). Those names differ depending
	390	# on the version of the book. What makes the difference between those
	391	# versions is the presence of "how-to-view" in the boot chapter.
	392	if [ -f boot/*how-to-view ]; then
	393	case "${this_script}" in
	394	*changingowner)
	395	orphan_scripts="${orphan_scripts} ${this_script}"
	396	;;
	397	*creatingdirs)
	398	orphan_scripts="${orphan_scripts} ${this_script}"
	399	;;
	400	*createfiles)
	401	orphan_scripts="${orphan_scripts} ${this_script}"
	402	;;
	403	*devices)
	404	orphan_scripts="${orphan_scripts} ${this_script}"
	405	;;
	406	*flags)
	407	orphan_scripts="${orphan_scripts} ${this_script}"
	408	;;
	409	*fstab)
	410	orphan_scripts="${orphan_scripts} ${this_script}"
	411	;;
	412	*pwdgroup)
	413	orphan_scripts="${orphan_scripts} ${this_script}"
	414	;;
	415	*settingenvironment)
	416	orphan_scripts="${orphan_scripts} ${this_script}"
	417	;;
	418	*)
	419	boottools="$boottools $this_script"
	420	;;
	421	esac
	422	else
	423	case "${this_script}" in
	424	*changingowner)
	425	orphan_scripts="${orphan_scripts} ${this_script}"
	426	;;
	427	*devices)
	428	orphan_scripts="${orphan_scripts} ${this_script}"
	429	;;
	430	*)
	431	boottools="$boottools $this_script"
	432	;;
	433	esac
	434	fi
[045b2dc]	435	#
	436	# Grab the name of the target, strip id number and misc words.
	437	case $this_script in
[179ae85]	438	*kernel) name=linux ;;
	439	*bootscripts) name="bootscripts-cross-lfs" ;;
	440	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	441	*udev-rules) name="udev-cross-lfs" ;;
	442	*grub-build) name=grub ;;
	443	*-aboot-build) name=aboot ;;
	444	*yaboot-build) name=yaboot ;;
	445	*colo-build) name=colo ;;
	446	*silo-build) name=silo ;;
	447	*arcload-build) name=arcload ;;
	448	*lilo-build) name=lilo ;;
[045b2dc]	449	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	450	esac
	451	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	452	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	453
	454	#--------------------------------------------------------------------#
	455	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	456	#--------------------------------------------------------------------#
	457	#
	458	# Drop in the name of the target on a new line, and the previous target
	459	# as a dependency. Also call the echo_message function.
[045b2dc]	460	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	461	#
[a160d86]	462	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	463	# Insert instructions for unpacking the package and changing directories
	464	#
[045b2dc]	465	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	466	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	467	#
	468	# Select a script execution method
[179ae85]	469	if [ -f boot/*how-to-view ]; then
	470	case $this_script in
	471	# The following 8 scripts are defined in the /boot directory but need
	472	# to be run as a root user. Set them up here but run them in another
	473	# phase
	474	*changingowner) wrt_RunAsRoot "${file}" ;;
	475	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	476	*createfiles) wrt_RunAsRoot "${file}" ;;
	477	*devices) wrt_RunAsRoot "${file}" ;;
	478	*flags) wrt_RunAsRoot "${file}" ;;
	479	*fstab)
	480	if [[ -n "$FSTAB" ]]; then
	481	LUSER_wrt_CopyFstab
	482	else
	483	wrt_RunAsRoot "${file}"
	484	fi
	485	;;
	486	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	487	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	488	*) LUSER_wrt_RunAsUser "${file}" ;;
	489	esac
	490	else
	491	case $this_script in
	492	# The following 2 scripts are defined in the /boot directory but need
	493	# to be run as a root user. Set them up here but run them in another
	494	# phase
	495	*changingowner) wrt_RunAsRoot "${file}" ;;
	496	*devices) wrt_RunAsRoot "${file}" ;;
	497	*fstab)
	498	if [[ -n "$FSTAB" ]]; then
	499	LUSER_wrt_CopyFstab
	500	else
	501	LUSER_wrt_RunAsUser "${file}"
	502	fi
	503	;;
	504	*) LUSER_wrt_RunAsUser "${file}" ;;
	505	esac
	506	fi
[877cc6a]	507	#
[045b2dc]	508	# Housekeeping...remove any build directory(ies) except if the package build fails.
	509	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	510	#
	511	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	512	wrt_touch
[877cc6a]	513	#
	514	#--------------------------------------------------------------------#
	515	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	516	#--------------------------------------------------------------------#
	517	#
	518	# Keep the script file name for Makefile dependencies.
	519	PREV=$this_script
	520
[045b2dc]	521	done
[877cc6a]	522	}
	523
	524
[045b2dc]	525	#--------------------------------------#
[d55a1a1]	526	testsuite_tools_Makefiles() { #
[045b2dc]	527	#--------------------------------------#
[877cc6a]	528
[d55a1a1]	529	if [[ "${METHOD}" = "chroot" ]]; then
	530	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	531	else
	532	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	533	PREV=""
[d55a1a1]	534	fi
[877cc6a]	535
	536	for file in testsuite-tools/* ; do
	537	# Keep the script file name
	538	this_script=`basename $file`
	539
	540	# First append each name of the script files to a list (this will become
	541	# the names of the targets in the Makefile
	542	testsuitetools="$testsuitetools $this_script"
	543
	544	# Grab the name of the target, strip id number, XXX-script
	545	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	546	-e 's@-64bit@@' \
	547	-e 's@-64@@' \
	548	-e 's@64@@' \
	549	-e 's@n32@@'`
	550
[a160d86]	551	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	552
	553	#--------------------------------------------------------------------#
	554	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	555	#--------------------------------------------------------------------#
	556	#
	557	# Drop in the name of the target on a new line, and the previous target
	558	# as a dependency. Also call the echo_message function.
[ca6b261]	559	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	560	#
[ca6b261]	561	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	562	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	563	#
[ca6b261]	564	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	565	#
[ca6b261]	566	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	567	#
	568	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	569	wrt_touch
[877cc6a]	570	#
	571	#--------------------------------------------------------------------#
	572	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	573	#--------------------------------------------------------------------#
	574	#
	575	# Keep the script file name for Makefile dependencies.
	576	PREV=$this_script
	577
	578	done
	579	}
	580
	581
[045b2dc]	582	#--------------------------------------#
[d55a1a1]	583	final_system_Makefiles() { #
[045b2dc]	584	#--------------------------------------#
[45f82718]	585	# Set envars and scripts for iteration targets
	586	if [[ -z "$1" ]] ; then
	587	local N=""
[d55a1a1]	588	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	589	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	590	else
	591	local N=-build_$1
	592	local basicsystem=""
	593	mkdir final-system$N
	594	cp final-system/* final-system$N
	595	for script in final-system$N/* ; do
	596	# Overwrite existing symlinks, files, and dirs
	597	sed -e 's/ln -sv/&f/g' \
	598	-e 's/mv -v/&f/g' \
	599	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	600	# Rename the scripts
	601	mv ${script} ${script}$N
[45f82718]	602	done
[a5f52ba]	603	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	604	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	605	# Delete *old Readline libraries just after make install
[10c8b78]	606	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	607	fi
	608
[d55a1a1]	609	if [[ "${METHOD}" = "chroot" ]]; then
	610	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	611	else
	612	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	613	fi
[877cc6a]	614
[45f82718]	615	for file in final-system$N/* ; do
[877cc6a]	616	# Keep the script file name
	617	this_script=`basename $file`
	618
[45f82718]	619	# Test if the stripping phase must be skipped.
[4384929]	620	# Skip also temp-perl for iterative runs
[877cc6a]	621	case $this_script in
[401f81e]	622	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	623	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	624	esac
	625
[4384929]	626	# Grab the name of the target, strip id number, XXX-script.
	627	# name1 is partially stripped and should be used for logging files.
	628	# name is completely stripped and is used for grabbing
	629	# the package name.
	630	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	631	-e 's,'$N',,'`
	632	name=`echo $name1 \| sed -e 's@temp-@@' \
	633	-e 's@-64bit@@' \
	634	-e 's@-64@@' \
	635	-e 's@64@@' \
	636	-e 's@n32@@'`
[877cc6a]	637
[45f82718]	638	# Find the version of the command files, if it corresponds with the building of
	639	# a specific package. We need this here to can skip scripts not needed for
	640	# iterations rebuilds
[a160d86]	641	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	642
[a160d86]	643	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	644	case "${this_script}" in
	645	stripping) ;;
	646	*) continue ;;
	647	esac
	648	fi
	649
	650	# Append each name of the script files to a list (this will become
	651	# the names of the targets in the Makefile
[10c8b78]	652	basicsystem="$basicsystem ${this_script}"
[45f82718]	653
[877cc6a]	654	#--------------------------------------------------------------------#
	655	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	656	#--------------------------------------------------------------------#
	657	#
	658	# Drop in the name of the target on a new line, and the previous target
	659	# as a dependency. Also call the echo_message function.
[10c8b78]	660	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	661
[a160d86]	662	# If $pkg_tarball isn't empty, we've got a package...
	663	if [ "$pkg_tarball" != "" ] ; then
[f546320]	664	# Touch timestamp file if installed files logs will be created.
	665	# But only for the firt build when running iterative builds.
	666	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	667	CHROOT_wrt_TouchTimestamp
	668	fi
[045b2dc]	669	CHROOT_Unpack "$pkg_tarball"
[a229600]	670	# If the testsuites must be run, initialize the log file
	671	case $name in
[269d81c]	672	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	673	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	674	;;
	675	* )
[10c8b78]	676	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	677	;;
	678	esac
	679	# If using optimizations, write the instructions
[1b65a84]	680	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	681	fi
	682	#
[045b2dc]	683	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	684	#
[f546320]	685	# Write installed files log and remove the build directory(ies)
	686	# except if the package build fails.
	687	if [ "$pkg_tarball" != "" ] ; then
	688	CHROOT_wrt_RemoveBuildDirs "$name"
	689	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	690	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	691	fi
	692	fi
[877cc6a]	693	#
[f546320]	694	# Include a touch of the target name so make can check
	695	# if it's already been made.
[93f38e7]	696	wrt_touch
[877cc6a]	697	#
	698	#--------------------------------------------------------------------#
	699	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	700	#--------------------------------------------------------------------#
	701	#
	702	# Keep the script file name for Makefile dependencies.
[10c8b78]	703	PREV=${this_script}
[45f82718]	704	# Set system_build envar for iteration targets
	705	system_build=$basicsystem
[877cc6a]	706	done # for file in final-system/* ...
	707	}
	708
[045b2dc]	709	#--------------------------------------#
[d55a1a1]	710	bootscripts_Makefiles() { #
[045b2dc]	711	#--------------------------------------#
[d55a1a1]	712
[c6ee8ea]	713	# New versions of the book do not have bootscripts anymore
	714	# (use systemd configuration files)
	715	# Define a variable to be used for the right script directory to parse
	716	if [ -d bootscripts ]; then
	717	config="bootscripts"
	718	else
	719	config="system-config"
	720	fi
	721
[d55a1a1]	722	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	723	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	724	else
[c6ee8ea]	725	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	726	fi
[877cc6a]	727
[c6ee8ea]	728	for file in $config/* ; do
[877cc6a]	729	# Keep the script file name
	730	this_script=`basename $file`
	731
	732	case $this_script in
	733	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	734	console) continue ;; # Use the files that came with the bootscripts
[f0de954]	735	# fstab is now here (for 3.x.y)
	736	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	737	*) ;;
	738	esac
	739
	740	# First append each name of the script files to a list (this will become
	741	# the names of the targets in the Makefile
	742	bootscripttools="$bootscripttools $this_script"
	743
[4384929]	744	# Grab the name of the target, strip id number, XXX-script.
	745	# name1 is partially stripped and should be used for logging files.
	746	# name is completely stripped and is used for grabbing
	747	# the package name.
	748	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	749	name=`echo $name1 \| sed -e 's@-64bit@@' \
	750	-e 's@-64@@' \
	751	-e 's@64@@' \
	752	-e 's@n32@@'`
[877cc6a]	753	case $name in
[c044e3c]	754	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	755	*udev-rules) name=udev-cross-lfs ;;
	756	esac
[c044e3c]	757
[a160d86]	758	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	759
	760	#--------------------------------------------------------------------#
	761	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	762	#--------------------------------------------------------------------#
	763	#
	764	# Drop in the name of the target on a new line, and the previous target
	765	# as a dependency. Also call the echo_message function.
[045b2dc]	766	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	767	#
[a160d86]	768	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	769	#
[f546320]	770	if [ "$pkg_tarball" != "" ] ; then
	771	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	772	CHROOT_wrt_TouchTimestamp
[f546320]	773	fi
	774	CHROOT_Unpack "$pkg_tarball"
	775	fi
[877cc6a]	776	#
[f0de954]	777	case $this_script in
	778	fstab) if [[ -n "$FSTAB" ]]; then
	779	CHROOT_wrt_CopyFstab
	780	else
	781	CHROOT_wrt_RunAsRoot "${file}"
	782	fi
	783	;;
	784	*) CHROOT_wrt_RunAsRoot "${file}"
	785	;;
	786	esac
[877cc6a]	787	#
[f546320]	788	# Write installed files log and remove the build directory(ies)
	789	# except if the package build fails.
	790	if [ "$pkg_tarball" != "" ] ; then
	791	CHROOT_wrt_RemoveBuildDirs "$name"
	792	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	793	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	794	fi
	795	fi
[877cc6a]	796	#
	797	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	798	wrt_touch
[877cc6a]	799	#
	800	#--------------------------------------------------------------------#
	801	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	802	#--------------------------------------------------------------------#
	803	#
	804	# Keep the script file name for Makefile dependencies.
	805	PREV=$this_script
	806
	807	done # for file in bootscripts/* ...
	808	}
	809
[608fbe1]	810	#--------------------------------------#
	811	network_Makefiles() { #
	812	#--------------------------------------#
	813
	814	if [[ "${METHOD}" = "chroot" ]]; then
	815	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	816	else
	817	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	818	fi
	819
	820	for file in network/* ; do
	821	# Keep the script file name
	822	this_script=`basename $file`
	823
	824	case $this_script in
	825	*choose) continue ;; # This is not a script but a commentary.
	826	*dhcp) continue ;; # Assume static networking.
	827	*dhcpcd) continue ;; # Assume static networking.
	828	*) ;;
	829	esac
	830
	831	# First append each name of the script files to a list (this will become
	832	# the names of the targets in the Makefile
	833	networktools="$networktools $this_script"
	834
	835	# Grab the name of the target, strip id number, XXX-script
[4384929]	836	# name1 is partially stripped and should be used for logging files.
	837	# name is completely stripped and is used for grabbing
	838	# the package name.
	839	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	840	name=`echo $name1 \| sed -e 's@-64bit@@' \
	841	-e 's@-64@@' \
	842	-e 's@64@@' \
	843	-e 's@n32@@'`
[608fbe1]	844	case $name in
[b4df9e1]	845	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	846	esac
	847
	848	pkg_tarball=$(get_package_tarball_name $name)
	849
	850	#--------------------------------------------------------------------#
	851	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	852	#--------------------------------------------------------------------#
	853	#
	854	# Drop in the name of the target on a new line, and the previous target
	855	# as a dependency. Also call the echo_message function.
	856	CHROOT_wrt_target "${this_script}" "$PREV"
	857	#
	858	# If $pkg_tarball isn't empty, we've got a package...
	859	#
	860	if [ "$pkg_tarball" != "" ] ; then
	861	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	862	CHROOT_wrt_TouchTimestamp
[608fbe1]	863	fi
	864	CHROOT_Unpack "$pkg_tarball"
	865	fi
	866	#
	867	CHROOT_wrt_RunAsRoot "${file}"
	868	#
	869	# Write installed files log and remove the build directory(ies)
	870	# except if the package build fails.
	871	if [ "$pkg_tarball" != "" ] ; then
	872	CHROOT_wrt_RemoveBuildDirs "$name"
	873	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	874	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	875	fi
	876	fi
	877	#
	878	# Include a touch of the target name so make can check if it's already been made.
	879	wrt_touch
	880	#
	881	#--------------------------------------------------------------------#
	882	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	883	#--------------------------------------------------------------------#
	884	#
	885	# Keep the script file name for Makefile dependencies.
	886	PREV=$this_script
	887
	888	done # for file in network/* ...
	889	}
	890
[045b2dc]	891	#--------------------------------------#
[d55a1a1]	892	bootable_Makefiles() { #
[045b2dc]	893	#--------------------------------------#
[877cc6a]	894
[d55a1a1]	895	if [[ "${METHOD}" = "chroot" ]]; then
	896	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	897	else
	898	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	899	fi
[877cc6a]	900
	901
[936efa8]	902	for file in bootable/* ; do
[877cc6a]	903	# Keep the script file name
	904	this_script=`basename $file`
	905
	906	# A little housekeeping on the scripts
	907	case $this_script in
	908	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	909	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	910	*kernel) # if there is no kernel config file do not build the kernel
	911	[[ -z $CONFIG ]] && continue
	912	# Copy the config file to /sources with a standardized name
	913	cp $CONFIG $BUILDDIR/sources/kernel-config
	914	;;
	915	esac
	916	#
	917	# First append each name of the script files to a list (this will become
	918	# the names of the targets in the Makefile
	919	bootabletools="$bootabletools $this_script"
	920	#
	921	# Grab the name of the target, strip id number and misc words.
	922	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	923	case $this_script in
	924	kernel) name=linux
	925	;;
	926	esac
[a160d86]	927
	928	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	929
	930	#--------------------------------------------------------------------#
	931	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	932	#--------------------------------------------------------------------#
	933	#
	934	# Drop in the name of the target on a new line, and the previous target
	935	# as a dependency. Also call the echo_message function.
[045b2dc]	936	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	937	#
[a160d86]	938	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	939	# Insert instructions for unpacking the package and changing directories
	940	#
[f546320]	941	if [ "$pkg_tarball" != "" ] ; then
	942	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	943	CHROOT_wrt_TouchTimestamp
[f546320]	944	fi
	945	CHROOT_Unpack "$pkg_tarball"
	946	fi
[877cc6a]	947	#
	948	# Select a script execution method
	949	case $this_script in
[045b2dc]	950	fstab) if [[ -n "$FSTAB" ]]; then
	951	CHROOT_wrt_CopyFstab
	952	else
	953	CHROOT_wrt_RunAsRoot "${file}"
	954	fi
	955	;;
	956	*) CHROOT_wrt_RunAsRoot "${file}"
	957	;;
[877cc6a]	958	esac
	959	#
[f546320]	960	# Write installed files log and remove the build directory(ies)
	961	# except if the package build fails.
	962	if [ "$pkg_tarball" != "" ] ; then
	963	CHROOT_wrt_RemoveBuildDirs "$name"
	964	if [ "${INSTALL_LOG}" = "y" ] ; then
	965	CHROOT_wrt_LogNewFiles "$name"
	966	fi
	967	fi
[877cc6a]	968	#
	969	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	970	wrt_touch
[877cc6a]	971	#
	972	#--------------------------------------------------------------------#
	973	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	974	#--------------------------------------------------------------------#
	975	#
	976	# Keep the script file name for Makefile dependencies.
	977	PREV=$this_script
	978
	979	done
	980
	981	}
	982
	983
[045b2dc]	984	#--------------------------------------#
	985	build_Makefile() { # Construct a Makefile from the book scripts
	986	#--------------------------------------#
	987
	988	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	989
	990	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	991	# Start with clean files
[045b2dc]	992	>$MKFILE
[877cc6a]	993	>$MKFILE.tmp
	994
[d55a1a1]	995	method_cmds=${METHOD}_Makefiles
[045b2dc]	996
	997	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
[3f83cb0]	998	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
[045b2dc]	999	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1000	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1001	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1002	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	1003	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	1004	fi
[d55a1a1]	1005	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	1006	# Add the iterations targets, if needed
	1007	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	1008	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[608fbe1]	1009	if [ -d network ]; then
	1010	network_Makefiles # If present, process network setup.
	1011	fi
[d55a1a1]	1012	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	1013
[3e7ceed]	1014	# Add the CUSTOM_TOOLS targets, if needed
	1015	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	1016
[877cc6a]	1017	# Add a header, some variables and include the function file
	1018	# to the top of the real Makefile.
[195ed9f]	1019	wrt_Makefile_header
[877cc6a]	1020
	1021	# Add chroot commands
	1022	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1023	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	1024	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	1025	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	1026	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	1027	-e '/^export/d' \
	1028	-e '/^logout/d' \
	1029	-e 's@ \\\@ @g' \| \
	1030	tr -d '\n' \| \
	1031	sed -e 's/ */ /g' \
	1032	-e 's\|\\$\|&&\|g' \
	1033	-e 's\|exit\|\|g' \
	1034	-e 's\|$\| -c\|' \
[f4d9a48]	1035	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	1036	-e 's\|set -e\|\|' \
	1037	-e 's\|set +h\|\|'`
[877cc6a]	1038	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1039	fi
	1040
[045b2dc]	1041	################## CHROOT ####################
	1042
[877cc6a]	1043	if [[ "${METHOD}" = "chroot" ]]; then
	1044	(
[045b2dc]	1045	cat << EOF
[877cc6a]	1046
[3f83cb0]	1047	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	1048	@sudo make do-housekeeping
[936efa8]	1049	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1050	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1051	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1052	@\$(call echo_finished,$VERSION)
[a160d86]	1053
[045b2dc]	1054	ck_UID:
	1055	@if [ \`id -u\` = "0" ]; then \\
	1056	echo "+--------------------------------------------------+"; \\
	1057	echo "\|You cannot run this makefile from the root account\|"; \\
	1058	echo "+--------------------------------------------------+"; \\
	1059	exit 1; \\
	1060	fi
	1061
	1062	#---------------AS ROOT
	1063	mk_SETUP:
	1064	@\$(call echo_SU_request)
[7a43320]	1065	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1066	@touch \$@
	1067
	1068	#---------------AS LUSER
[3f83cb0]	1069	mk_F_PREPS: mk_SETUP
	1070	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
[730436a]	1071	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1072	@sudo make restore-luser-env
	1073	@touch \$@
	1074
[3f83cb0]	1075	mk_SUDO: mk_F_PREPS
[7a43320]	1076	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1077	@touch \$@
	1078
	1079	#---------------CHROOT JAIL
	1080	mk_SYSTOOLS: mk_SUDO
	1081	@\$(call echo_CHROOT_request)
	1082	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1083	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1084	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1085	@touch \$@
[877cc6a]	1086
[269d81c]	1087	mk_BLFS_TOOL: create-sbu_du-report
	1088	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1089	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1090	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1091	fi;
	1092	@touch \$@
	1093
	1094	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1095	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1096	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1097	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1098	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1099	fi;
	1100	@touch \$@
	1101
[6c1b96b]	1102	SETUP: $host_prep
[3f83cb0]	1103	AS_LUSER: $final_preps $cross_tools $temptools
[6c1b96b]	1104	SUDO: $orphan_scripts
	1105	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1106	PREP_CHROOT_JAIL: ${chroottools}
	1107	CHROOT_JAIL: SHELL=/tools/bin/bash
	1108	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1109	CUSTOM_TOOLS: $custom_list
[877cc6a]	1110
[1838bc7]	1111
	1112	create-sbu_du-report: mk_SYSTOOLS
	1113	@\$(call echo_message, Building)
	1114	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	1115	./create-sbu_du-report.sh logs $VERSION; \\
	1116	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1117	fi;
	1118	@touch \$@
	1119
[7d9a82d]	1120	do-housekeeping:
[4524fb2]	1121	@-umount \$(MOUNT_PT)/dev/pts
[269d81c]	1122	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
	1123	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1124	umount \$(MOUNT_PT)/\$\$link; \\
	1125	unset link; \\
	1126	else \\
	1127	umount \$(MOUNT_PT)/dev/shm; \\
	1128	fi
[4524fb2]	1129	@-umount \$(MOUNT_PT)/dev
	1130	@-umount \$(MOUNT_PT)/sys
	1131	@-umount \$(MOUNT_PT)/proc
[045b2dc]	1132	@-rm /tools /cross-tools
[6ad5a2f]	1133	@-if [ ! -f luser-exist ]; then \\
	1134	userdel \$(LUSER); \\
[962793a]	1135	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1136	fi;
	1137
[877cc6a]	1138	EOF
	1139	) >> $MKFILE
[045b2dc]	1140
[877cc6a]	1141	fi
	1142
[045b2dc]	1143	################### BOOT #####################
[877cc6a]	1144
	1145	if [[ "${METHOD}" = "boot" ]]; then
	1146	(
[045b2dc]	1147	cat << EOF
[877cc6a]	1148
[3f83cb0]	1149	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
[045b2dc]	1150	@sudo make restore-luser-env
	1151	@sudo make do-housekeeping
[877cc6a]	1152	@\$(call echo_boot_finished,$VERSION)
	1153
[3e7ceed]	1154	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1155	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1156	@\$(call echo_finished,$VERSION)
	1157
	1158
[045b2dc]	1159	ck_UID:
	1160	@if [ \`id -u\` = "0" ]; then \\
	1161	echo "+--------------------------------------------------+"; \\
	1162	echo "\|You cannot run this makefile from the root account\|"; \\
	1163	echo "\|However, if this is the boot environment \|"; \\
	1164	echo "\| the command you are looking for is \|"; \\
	1165	echo "\| make makesys \|"; \\
[730436a]	1166	echo "\| to complete the build \|"; \\
[045b2dc]	1167	echo "+--------------------------------------------------+"; \\
	1168	exit 1; \\
	1169	fi
[877cc6a]	1170
[045b2dc]	1171	#---------------AS ROOT
[877cc6a]	1172
[045b2dc]	1173	mk_SETUP:
	1174	@\$(call echo_SU_request)
[7a43320]	1175	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1176	@touch \$@
	1177
	1178	#---------------AS LUSER
[a160d86]	1179
[3f83cb0]	1180	mk_F_PREPS: mk_SETUP
	1181	@\$(call echo_PHASE,Final Preparations and Cross Tools)
[730436a]	1182	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1183	@touch \$@
	1184
[3f83cb0]	1185	mk_SUDO: mk_F_PREPS
[7a43320]	1186	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1187	@touch \$@
	1188
	1189	#---------------AS ROOT
	1190
	1191	mk_FINAL:
	1192	@\$(call echo_PHASE,Final System)
[7a43320]	1193	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1194	@touch \$@
	1195
[269d81c]	1196	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1197	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1198	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1199	( make -C $BLFS_ROOT/work ); \\
	1200	fi;
	1201	@touch \$@
[269d81c]	1202
	1203	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1204	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1205	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1206	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1207	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1208	fi;
	1209	@touch \$@
	1210
	1211	SETUP: $host_prep
[3f83cb0]	1212	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
[3e7ceed]	1213	SUDO: $orphan_scripts
[aec4483]	1214	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1215	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1216	CUSTOM_TOOLS: $custom_list
[045b2dc]	1217
	1218	do-housekeeping:
	1219	@-rm /tools /cross-tools
	1220	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1221	userdel \$(LUSER); \\
[962793a]	1222	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1223	fi;
	1224
[045b2dc]	1225	EOF
	1226	) >> $MKFILE
	1227	fi
	1228
	1229	(
	1230	cat << EOF
	1231
[6ad5a2f]	1232	restore-luser-env:
[877cc6a]	1233	@\$(call echo_message, Building)
[962793a]	1234	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1235	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1236	fi;
[962793a]	1237	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1238	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1239	fi;
[962793a]	1240	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1241	touch \$@ && \\
	1242	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1243	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1244
[045b2dc]	1245	########################################################
	1246
[7d9a82d]	1247
[877cc6a]	1248	EOF
	1249	) >> $MKFILE
	1250
	1251	# Bring over the items from the Makefile.tmp
	1252	cat $MKFILE.tmp >> $MKFILE
	1253	rm $MKFILE.tmp
	1254
[045b2dc]	1255	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1256	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: