Context Navigation

source: CLFS/master.sh@ c88d594

experimental

Last change on this file since c88d594 was 1ba5024, checked in by George Boudreau <georgeb@…>, 18 years ago
Remove unnecessary flow tests. Added missing function, wrt_report. Added restore-luser-env to chroot build
Property mode set to `100755`
File size: 46.6 KB

Rev	Line
[0170229]	1	#!/bin/sh
[1ce084e]	2	# $Id$
[0170229]	3
[d14903f]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
[0170229]	7	###################################
	8	### FUNCTIONS ###
	9	###################################
	10
[d14903f]	11	#--------------------------------------#
	12	BOOT_wrt_target() { # "${this_script}" "$PREV"
	13	#--------------------------------------#
	14	local i=$1
	15	local PREV=$2
	16	case $i in
	17	iteration* ) local LOGFILE=$this_script.log ;;
	18	* ) local LOGFILE=$this_script ;;
	19	esac
	20	(
	21	cat << EOF
	22
	23	$i: $PREV
	24	@\$(call echo_message, Building)
	25	@./progress_bar.sh \$@ \$\$PPID &
	26	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude=${SCRIPT_ROOT}\`\n" >logs/$LOGFILE
	27	EOF
	28	) >> $MKFILE.tmp
	29	}
	30
	31	#--------------------------------------#
	32	BOOT_wrt_Unpack() { # "$pkg_tarball"
	33	#--------------------------------------#
	34	local FILE=$1
	35	local optSAVE_PREVIOUS=$2
	36
	37	if [ "${optSAVE_PREVIOUS}" != "1" ]; then
	38	(
	39	cat << EOF
	40	@\$(call remove_existing_dirs2,$FILE)
	41	EOF
	42	) >> $MKFILE.tmp
	43	fi
	44	(
	45	cat << EOF
	46	@\$(call unpack3,$FILE)
	47	@\$(call get_pkg_root2)
	48	EOF
	49	) >> $MKFILE.tmp
	50	}
	51
	52	#----------------------------------#
	53	BOOT_wrt_RunAsRoot() { # "${this_script}" "${file}"
	54	#----------------------------------#
	55	local this_script=$1
	56	local file=$2
	57	(
	58	cat << EOF
	59	@( time { source envars && ${PROGNAME}-commands/`dirname $file`/\$@ >>logs/\$@ 2>&1 ; } ) 2>>logs/\$@ && \\
	60	echo -e "\nKB: \`du -skx --exclude=${SCRIPT_ROOT} \`\n" >>logs/\$@
	61	EOF
	62	) >> $MKFILE.tmp
	63	}
	64
	65	#--------------------------------------#
	66	BOOT_wrt_RemoveBuildDirs() { # "${name}"
	67	#--------------------------------------#
	68	local name=$1
	69	(
	70	cat << EOF
	71	@\$(call remove_build_dirs2,$name)
	72	EOF
	73	) >> $MKFILE.tmp
	74	}
[0170229]	75
[d14903f]	76	#----------------------------------#
	77	BOOT_wrt_test_log() { #
	78	#----------------------------------#
	79	local TESTLOGFILE=$1
	80	(
	81	cat << EOF
	82	@echo "export TEST_LOG=/\$(SCRIPT_ROOT)/test-logs/$TESTLOGFILE" >> envars && \\
	83	echo -e "\n\`date\`\n" >test-logs/$TESTLOGFILE
	84	EOF
	85	) >> $MKFILE.tmp
	86	}
	87
	88	#----------------------------------#
	89	BOOT_wrt_CopyFstab() { #
	90	#----------------------------------#
	91	(
	92	cat << EOF
	93	@( time { cp -v /sources/fstab /etc/fstab >>logs/${this_script} 2>&1 ; } ) 2>>logs/${this_script}
	94	EOF
	95	) >> $MKFILE.tmp
	96	}
	97
	98
	99	########################################
	100
	101
	102	#--------------------------------------#
	103	host_prep_Makefiles() { #
	104	#--------------------------------------#
[3b63c8c]	105	local CLFS_HOST
[0170229]	106
[d14903f]	107	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[0170229]	108
	109	# defined here, only for ease of reading
[3b63c8c]	110	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[0170229]	111	(
	112	cat << EOF
	113	023-creatingtoolsdir:
	114	@\$(call echo_message, Building)
[9199a13]	115	@mkdir \$(MOUNT_PT)/tools && \\
	116	rm -f /tools && \\
	117	ln -s \$(MOUNT_PT)/tools /
[0170229]	118	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	119	mkdir \$(MOUNT_PT)/sources; \\
	120	fi;
	121	@chmod a+wt \$(MOUNT_PT)/sources && \\
[9199a13]	122	touch \$@ && \\
	123	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	124	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	125
	126	024-creatingcrossdir: 023-creatingtoolsdir
	127	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[9199a13]	128	rm -f /cross-tools && \\
	129	ln -s \$(MOUNT_PT)/cross-tools /
	130	@touch \$@ && \\
	131	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	132	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	133
	134	025-addinguser: 024-creatingcrossdir
	135	@\$(call echo_message, Building)
[9485eba]	136	@if [ ! -d /home/\$(LUSER) ]; then \\
	137	groupadd \$(LGROUP); \\
	138	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[0170229]	139	else \\
[30737ea8]	140	touch luser-exist; \\
[0170229]	141	fi;
[9485eba]	142	@chown \$(LUSER) \$(MOUNT_PT) && \\
	143	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
	144	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
	145	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
[9199a13]	146	touch \$@ && \\
	147	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	148	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	149
	150	026-settingenvironment: 025-addinguser
	151	@\$(call echo_message, Building)
[9485eba]	152	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	153	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[0170229]	154	fi;
[9485eba]	155	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	156	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[0170229]	157	fi;
[9485eba]	158	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	159	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	160	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	161	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	162	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	163	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	164	echo "" >> /home/\$(LUSER)/.bashrc && \\
	165	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	166	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	167	echo "" >> /home/\$(LUSER)/.bashrc && \\
	168	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	169	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	170	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	171	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	172	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[0170229]	173	touch envars && \\
[d14903f]	174	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[9199a13]	175	touch \$@ && \\
	176	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	177	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	178	EOF
	179	) >> $MKFILE.tmp
[d14903f]	180	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[0170229]	181
	182	}
	183
[d14903f]	184	#--------------------------------------#
	185	cross_tools_Makefiles() { #
	186	#--------------------------------------#
	187	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[0170229]	188
	189	for file in cross-tools/* ; do
	190	# Keep the script file name
	191	this_script=`basename $file`
	192	#
	193	# Skip this script...
	194	case $this_script in
	195	cflags \| variables ) # work done in host_prep_Makefiles
	196	continue; ;;
	197	*) ;;
	198	esac
	199	#
	200	# Set the dependency for the first target.
	201	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	202
	203	# First append each name of the script files to a list (this will become
	204	# the names of the targets in the Makefile
	205	cross_tools="$cross_tools $this_script"
	206
	207	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	208	# and binutils in chapter 5)
	209	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	210	-e 's@-static@@' \
	211	-e 's@-final@@' \
[3b63c8c]	212	-e 's@-64@@' \
[0170229]	213	-e 's@-n32@@'`
[3b63c8c]	214	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	215
	216	#--------------------------------------------------------------------#
	217	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	218	#--------------------------------------------------------------------#
	219	#
	220	# Drop in the name of the target on a new line, and the previous target
	221	# as a dependency. Also call the echo_message function.
[d14903f]	222	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	223	#
[3b63c8c]	224	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	225	#
[d14903f]	226	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[0170229]	227	#
[d14903f]	228	LUSER_wrt_RunAsUser "${file}"
[0170229]	229	#
[d14903f]	230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	231	#
	232	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	233	wrt_touch
[0170229]	234	#
	235	#--------------------------------------------------------------------#
	236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	237	#--------------------------------------------------------------------#
	238	#
	239	# Keep the script file name for Makefile dependencies.
	240	PREV=$this_script
	241
	242	done # for file in ....
	243	}
	244
[d14903f]	245	#--------------------------------------#
	246	temptools_Makefiles() { #
	247	#--------------------------------------#
	248	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[0170229]	249
	250	for file in temp-system/* ; do
	251	# Keep the script file name
	252	this_script=`basename $file`
[3b63c8c]	253	#
	254	# Deal with any odd scripts..
	255	case $this_script in
	256	*choose) # The choose script will fail if you cannot enter the new environment
	257	# If the 'boot' build method was chosen don't run the script
	258	[[ $METHOD = "boot" ]] && continue; ;;
	259	*) ;;
	260	esac
	261
[0170229]	262	#
	263	# First append each name of the script files to a list (this will become
	264	# the names of the targets in the Makefile
	265	temptools="$temptools $this_script"
	266
	267	#
	268	# Grab the name of the target, strip id number, XXX-script
	269	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	270	#
[3b63c8c]	271	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	272
	273	#--------------------------------------------------------------------#
	274	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	275	#--------------------------------------------------------------------#
	276	#
	277	# Drop in the name of the target on a new line, and the previous target
	278	# as a dependency. Also call the echo_message function.
[d14903f]	279	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	280	#
[3b63c8c]	281	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	282	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	283	#
[d14903f]	284	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	285	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	286	#
[d14903f]	287	LUSER_wrt_RunAsUser "${file}"
[0170229]	288	#
[d14903f]	289	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	290	#
	291	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	292	wrt_touch
[0170229]	293	#
	294	#--------------------------------------------------------------------#
	295	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	296	#--------------------------------------------------------------------#
	297	#
	298	# Keep the script file name for Makefile dependencies.
	299	PREV=$this_script
	300	done # for file in ....
	301	}
	302
	303
[d14903f]	304	#--------------------------------------#
	305	chroot_Makefiles() { #
	306	#--------------------------------------#
	307	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[0170229]	308
[d14903f]	309	for file in chroot/* ; do
[0170229]	310	# Keep the script file name
	311	this_script=`basename $file`
[d14903f]	312	#
	313	# Skipping scripts is done now and not included in the build tree.
[0170229]	314	case $this_script in
[d14903f]	315	chroot) continue ;;
[0170229]	316	esac
[d14903f]	317
[0170229]	318	#
	319	# First append each name of the script files to a list (this will become
	320	# the names of the targets in the Makefile
[d14903f]	321	case "${this_script}" in
	322	*util-linux) : ;;
	323	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	324	*) chroottools="$chroottools $this_script" ;;
	325	esac
	326
	327	# Grab the name of the target, strip id number, XXX-script
	328	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	329
[3b63c8c]	330	pkg_tarball=$(get_package_tarball_name $name)
[d14903f]	331
[1ba5024]	332	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
	333	# .. Customized makefile entry
[d14903f]	334	case "${this_script}" in
	335	*util-linux)
	336	LUSER_wrt_target "${this_script}" "$PREV"
[1ba5024]	337	LUSER_wrt_unpack "$pkg_tarball"
	338	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[d14903f]	339	LUSER_wrt_RunAsUser "${file}"
	340	LUSER_RemoveBuildDirs "${name}"
	341	wrt_touch
	342	temptools="$temptools $this_script"
	343	continue ;;
	344	esac
	345
[0170229]	346
	347	#--------------------------------------------------------------------#
	348	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	349	#--------------------------------------------------------------------#
	350	#
	351	# Drop in the name of the target on a new line, and the previous target
	352	# as a dependency. Also call the echo_message function.
[d14903f]	353	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	354	#
[3b63c8c]	355	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	356	# Insert instructions for unpacking the package and changing directories
	357	#
[d14903f]	358	if [ "$pkg_tarball" != "" ] ; then
	359	case $this_script in
	360	*util-linux) ROOT_Unpack "$pkg_tarball" ;;
	361	*) CHROOT_Unpack "$pkg_tarball" ;;
	362	esac
	363	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	364	fi
[0170229]	365	#
	366	# Select a script execution method
	367	case $this_script in
[d14903f]	368	*kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;;
	369	*util-linux) ROOT_RunAsRoot "${file}" ;;
	370	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[0170229]	371	esac
	372	#
[d14903f]	373	# Housekeeping...remove the build directory(ies), except if the package build fails.
	374	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	375	#
	376	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	377	wrt_touch
[0170229]	378	#
	379	#--------------------------------------------------------------------#
	380	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	381	#--------------------------------------------------------------------#
	382	#
	383	# Keep the script file name for Makefile dependencies.
	384	PREV=$this_script
	385
[d14903f]	386	done # for file in...
[0170229]	387	}
	388
	389
[d14903f]	390	#--------------------------------------#
	391	boot_Makefiles() { #
	392	#--------------------------------------#
	393
	394	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	395	#
	396	# Create a target bootable partition containing a compile environment. Later
	397	# on we boot into this environment and contine the build.
	398	#
	399	for file in boot/* ; do
[0170229]	400	# Keep the script file name
	401	this_script=`basename $file`
[d14903f]	402
	403	# A little housekeeping on the scripts
[fd5cb46]	404	case $this_script in
[d14903f]	405	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
	406	whatnext) continue ;;
	407	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	408	*kernel) # if there is no kernel config file do not build the kernel
	409	[[ -z $CONFIG ]] && continue
	410	# Copy the config file to /sources with a standardized name
	411	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	412	;;
[fd5cb46]	413	esac
[0170229]	414	#
	415	# First append each name of the script files to a list (this will become
	416	# the names of the targets in the Makefile
[d14903f]	417	case "${this_script}" in
	418	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	419	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	420	*) boottools="$boottools $this_script" ;;
	421	esac
	422	#
	423	# Grab the name of the target, strip id number and misc words.
	424	case $this_script in
	425	*kernel) name=linux ;;
	426	*bootscripts) name="bootscripts-cross-lfs" ;;
	427	*udev-rules) name="udev-cross-lfs" ;;
	428	*grub-build) name=grub ;;
	429	*-aboot-build) name=aboot ;;
	430	*yaboot-build) name=yaboot ;;
	431	*colo-build) name=colo ;;
	432	*silo-build) name=silo ;;
	433	*arcload-build) name=arcload ;;
	434	*lilo-build) name=lilo ;;
	435	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	436	esac
	437	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[3b63c8c]	438	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	439
	440	#--------------------------------------------------------------------#
	441	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	442	#--------------------------------------------------------------------#
	443	#
	444	# Drop in the name of the target on a new line, and the previous target
	445	# as a dependency. Also call the echo_message function.
[d14903f]	446	LUSER_wrt_target "${this_script}" "$PREV"
[0170229]	447	#
[3b63c8c]	448	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	449	# Insert instructions for unpacking the package and changing directories
	450	#
[d14903f]	451	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
	452	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	453	#
	454	# Select a script execution method
	455	case $this_script in
[d14903f]	456	# The following 2 scripts are defined in the /boot directory but need
	457	# to be run as a root user. Set them up here but run them in another phase
	458	changingowner) wrt_RunAsRoot "${this_script}" "${file}" ;;
	459	devices) wrt_RunAsRoot "${this_script}" "${file}" ;;
	460	fstab) if [[ -n "$FSTAB" ]]; then
	461	LUSER_wrt_CopyFstab
	462	else
	463	LUSER_wrt_RunAsUser "${file}"
	464	fi
	465	;;
	466	*) LUSER_wrt_RunAsUser "${file}" ;;
[0170229]	467	esac
	468	#
[d14903f]	469	# Housekeeping...remove any build directory(ies) except if the package build fails.
	470	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[0170229]	471	#
	472	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	473	wrt_touch
[0170229]	474	#
	475	#--------------------------------------------------------------------#
	476	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	477	#--------------------------------------------------------------------#
	478	#
	479	# Keep the script file name for Makefile dependencies.
	480	PREV=$this_script
	481
[d14903f]	482	done
[0170229]	483	}
	484
	485
[d14903f]	486	#--------------------------------------#
	487	chroot_testsuite_tools_Makefiles() { #
	488	#--------------------------------------#
	489	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
[0170229]	490
	491	for file in testsuite-tools/* ; do
	492	# Keep the script file name
	493	this_script=`basename $file`
	494
	495	# First append each name of the script files to a list (this will become
	496	# the names of the targets in the Makefile
	497	testsuitetools="$testsuitetools $this_script"
	498
	499	# Grab the name of the target, strip id number, XXX-script
	500	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	501	-e 's@-64bit@@' \
	502	-e 's@-64@@' \
	503	-e 's@64@@' \
	504	-e 's@n32@@'`
	505
[3b63c8c]	506	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	507
	508	#--------------------------------------------------------------------#
	509	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	510	#--------------------------------------------------------------------#
	511	#
	512	# Drop in the name of the target on a new line, and the previous target
	513	# as a dependency. Also call the echo_message function.
[d14903f]	514	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	515	#
[d14903f]	516	CHROOT_Unpack "$pkg_tarball"
[c205656]	517	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	518	#
[d14903f]	519	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	520	#
[d14903f]	521	CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	522	#
	523	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	524	wrt_touch
[0170229]	525	#
	526	#--------------------------------------------------------------------#
	527	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	528	#--------------------------------------------------------------------#
	529	#
	530	# Keep the script file name for Makefile dependencies.
	531	PREV=$this_script
	532
	533	done
	534	}
	535
[d14903f]	536	#--------------------------------------#
	537	boot_testsuite_tools_Makefiles() { #
	538	#--------------------------------------#
	539	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[0170229]	540	for file in testsuite-tools/* ; do
	541	# Keep the script file name
	542	this_script=`basename $file`
	543
	544	# First append each name of the script files to a list (this will become
	545	# the names of the targets in the Makefile
[39d4d5c]	546	PREV=
[0170229]	547	testsuitetools="$testsuitetools $this_script"
	548
	549	# Grab the name of the target, strip id number, XXX-script
	550	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	551	-e 's@-64bit@@' \
	552	-e 's@-64@@' \
	553	-e 's@64@@' \
	554	-e 's@n32@@'`
	555
[3b63c8c]	556	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	557
	558	#--------------------------------------------------------------------#
	559	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	560	#--------------------------------------------------------------------#
	561	#
	562	# Drop in the name of the target on a new line, and the previous target
	563	# as a dependency. Also call the echo_message function.
[d14903f]	564	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	565	#
[d14903f]	566	BOOT_wrt_Unpack "$pkg_tarball"
[c205656]	567	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	568	#
[d14903f]	569	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	570	#
[d14903f]	571	BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	572	#
	573	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	574	wrt_touch
[0170229]	575	#
	576	#--------------------------------------------------------------------#
	577	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	578	#--------------------------------------------------------------------#
	579	#
	580	# Keep the script file name for Makefile dependencies.
	581	PREV=$this_script
	582
	583	done
[d14903f]	584
[0170229]	585	}
	586
	587
[d14903f]	588	#--------------------------------------#
	589	chroot_final_system_Makefiles() { #
	590	#--------------------------------------#
[b12abe1]	591	# Set envars and scripts for iteration targets
	592	LOGS="" # Start with an empty global LOGS envar
	593	if [[ -z "$1" ]] ; then
	594	local N=""
	595	else
	596	local N=-build_$1
	597	local basicsystem=""
	598	mkdir final-system$N
	599	cp final-system/* final-system$N
	600	for script in final-system$N/* ; do
	601	# Overwrite existing symlinks, files, and dirs
	602	sed -e 's/ln -sv/&f/g' \
	603	-e 's/mv -v/&f/g' \
	604	-e 's/mkdir -v/&p/g' -i ${script}
	605	done
	606	# Remove Bzip2 binaries before make install
	607	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	608	# Delete *old Readline libraries just after make install
	609	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	610	fi
	611
[d14903f]	612	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
[0170229]	613
[b12abe1]	614	for file in final-system$N/* ; do
[0170229]	615	# Keep the script file name
	616	this_script=`basename $file`
	617
[b12abe1]	618	# Test if the stripping phase must be skipped.
	619	# Skip alsp temp-perl for iterative runs
[fd5cb46]	620	case $this_script in
[47fddc8]	621	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[b12abe1]	622	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	623	esac
[3fcd63e]	624
[0170229]	625	# Grab the name of the target, strip id number, XXX-script
	626	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	627	-e 's@temp-@@' \
	628	-e 's@-64bit@@' \
	629	-e 's@-64@@' \
	630	-e 's@64@@' \
	631	-e 's@n32@@'`
	632
[b12abe1]	633	# Find the version of the command files, if it corresponds with the building of
	634	# a specific package. We need this here to can skip scripts not needed for
	635	# iterations rebuilds
[3b63c8c]	636	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	637
[3b63c8c]	638	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	639	case "${this_script}" in
	640	stripping) ;;
	641	*) continue ;;
	642	esac
	643	fi
	644
	645	# Append each name of the script files to a list (this will become
	646	# the names of the targets in the Makefile
	647	basicsystem="$basicsystem ${this_script}${N}"
	648
	649	# Append each name of the script files to a list (this will become
	650	# the names of the logs to be moved for each iteration)
	651	LOGS="$LOGS ${this_script}"
	652
[0170229]	653	#--------------------------------------------------------------------#
	654	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	655	#--------------------------------------------------------------------#
	656	#
	657	# Drop in the name of the target on a new line, and the previous target
	658	# as a dependency. Also call the echo_message function.
[d14903f]	659	CHROOT_wrt_target "${this_script}${N}" "$PREV"
[0170229]	660
[3b63c8c]	661	# If $pkg_tarball isn't empty, we've got a package...
	662	if [ "$pkg_tarball" != "" ] ; then
[d14903f]	663	CHROOT_Unpack "$pkg_tarball"
[e35e794]	664	# If the testsuites must be run, initialize the log file
	665	case $name in
	666	binutils \| gcc \| glibc )
[d14903f]	667	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[e35e794]	668	;;
	669	* )
[d14903f]	670	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[e35e794]	671	;;
	672	esac
	673	# If using optimizations, write the instructions
[c205656]	674	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	675	fi
	676	#
[d14903f]	677	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	678	#
[d14903f]	679	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	680	#
	681	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	682	wrt_touch
[0170229]	683	#
	684	#--------------------------------------------------------------------#
	685	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	686	#--------------------------------------------------------------------#
	687	#
	688	# Keep the script file name for Makefile dependencies.
[b12abe1]	689	PREV=${this_script}${N}
	690	# Set system_build envar for iteration targets
	691	system_build=$basicsystem
[0170229]	692	done # for file in final-system/* ...
	693	}
	694
[d14903f]	695	#--------------------------------------#
	696	boot_final_system_Makefiles() { #
	697	#--------------------------------------#
[b12abe1]	698	# Set envars and scripts for iteration targets
	699	LOGS="" # Start with an empty global LOGS envar
	700	if [[ -z "$1" ]] ; then
	701	local N=""
	702	# The makesys phase was initiated in bm_testsuite_tools_makefile
	703	[[ "$TEST" = 0 ]] && PREV=""
	704	else
	705	local N=-build_$1
	706	local basicsystem=""
	707	mkdir final-system$N
	708	cp final-system/* final-system$N
	709	for script in final-system$N/* ; do
	710	# Overwrite existing symlinks, files, and dirs
	711	sed -e 's/ln -sv/&f/g' \
	712	-e 's/mv -v/&f/g' \
	713	-e 's/mkdir -v/&p/g' -i ${script}
	714	done
	715	# Remove Bzip2 binaries before make install
	716	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	717	# Delete *old Readline libraries just after make install
	718	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	719	fi
[0170229]	720
[d14903f]	721	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
[39d4d5c]	722
[b12abe1]	723	for file in final-system$N/* ; do
[0170229]	724	# Keep the script file name
	725	this_script=`basename $file`
	726
[3fcd63e]	727	# Test if the stripping phase must be skipped
[b12abe1]	728	# Skip alsp temp-perl for iterative runs
[64cc345]	729	case $this_script in
[47fddc8]	730	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[b12abe1]	731	temp-perl) [[ -n "$N" ]] && continue ;;
[fd5cb46]	732	esac
[0170229]	733
	734	# Grab the name of the target, strip id number, XXX-script
	735	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	736	-e 's@temp-@@' \
	737	-e 's@-64bit@@' \
	738	-e 's@-64@@' \
	739	-e 's@64@@' \
	740	-e 's@n32@@'`
	741
[b12abe1]	742	# Find the version of the command files, if it corresponds with the building of
	743	# a specific package. We need this here to can skip scripts not needed for
	744	# iterations rebuilds
[0170229]	745
[3b63c8c]	746	pkg_tarball=$(get_package_tarball_name $name)
	747
	748	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[b12abe1]	749	case "${this_script}" in
	750	stripping) ;;
	751	*) continue ;;
	752	esac
	753	fi
	754
	755	# Append each name of the script files to a list (this will become
	756	# the names of the targets in the Makefile
	757	basicsystem="$basicsystem ${this_script}${N}"
	758
	759	# Append each name of the script files to a list (this will become
	760	# the names of the logs to be moved for each iteration)
	761	LOGS="$LOGS ${this_script}"
	762
[0170229]	763	#--------------------------------------------------------------------#
	764	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	765	#--------------------------------------------------------------------#
	766	#
	767	# Drop in the name of the target on a new line, and the previous target
	768	# as a dependency. Also call the echo_message function.
[d14903f]	769	BOOT_wrt_target "${this_script}${N}" "$PREV"
[0170229]	770
[3b63c8c]	771	# If $pkg_tarball isn't empty, we've got a package...
	772	if [ "$pkg_tarball" != "" ] ; then
	773	FILE="$pkg_tarball"
[d14903f]	774	BOOT_wrt_Unpack "$FILE"
[e35e794]	775	# If the testsuites must be run, initialize the log file
	776	case $name in
	777	binutils \| gcc \| glibc )
[d14903f]	778	[[ "$TEST" != "0" ]] && BOOT_wrt_test_log "${this_script}"
[e35e794]	779	;;
	780	* )
[d14903f]	781	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && BOOT_wrt_test_log "${this_script}"
[e35e794]	782	;;
	783	esac
	784	# If using optimizations, write the instructions
[c205656]	785	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[0170229]	786	fi
	787	#
[d14903f]	788	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	789	#
[d14903f]	790	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	791	#
	792	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	793	wrt_touch
[0170229]	794	#
	795	#--------------------------------------------------------------------#
	796	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	797	#--------------------------------------------------------------------#
	798	#
	799	# Keep the script file name for Makefile dependencies.
[b12abe1]	800	PREV=${this_script}${N}
	801	# Set system_build envar for iteration targets
	802	system_build=$basicsystem
[0170229]	803	done # for file in final-system/* ...
	804
[d14903f]	805	}
[0170229]	806
[d14903f]	807	#--------------------------------------#
	808	chroot_bootscripts_Makefiles() { #
	809	#--------------------------------------#
	810	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
[0170229]	811
	812	for file in bootscripts/* ; do
	813	# Keep the script file name
	814	this_script=`basename $file`
	815
	816	case $this_script in
[eba62c0]	817	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
[0170229]	818	console) continue ;; # Use the files that came with the bootscripts
	819	*) ;;
	820	esac
	821
	822	# First append each name of the script files to a list (this will become
	823	# the names of the targets in the Makefile
	824	bootscripttools="$bootscripttools $this_script"
	825
	826	# Grab the name of the target, strip id number, XXX-script
	827	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	828	-e 's@-64bit@@' \
	829	-e 's@-64@@' \
	830	-e 's@64@@' \
	831	-e 's@n32@@'`
[fd5cb46]	832	case $name in
[eba62c0]	833	bootscripts) name=bootscripts-cross-lfs ;;
	834	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	835	esac
[3b63c8c]	836
	837	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	838
	839	#--------------------------------------------------------------------#
	840	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	841	#--------------------------------------------------------------------#
	842	#
	843	# Drop in the name of the target on a new line, and the previous target
	844	# as a dependency. Also call the echo_message function.
[d14903f]	845	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	846	#
[3b63c8c]	847	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	848	#
[d14903f]	849	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[0170229]	850	#
[d14903f]	851	CHROOT_wrt_RunAsRoot "${file}"
[0170229]	852	#
[d14903f]	853	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	854	#
	855	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	856	wrt_touch
[0170229]	857	#
	858	#--------------------------------------------------------------------#
	859	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	860	#--------------------------------------------------------------------#
	861	#
	862	# Keep the script file name for Makefile dependencies.
	863	PREV=$this_script
	864
	865	done # for file in bootscripts/* ...
	866	}
	867
[d14903f]	868	#--------------------------------------#
	869	boot_bootscripts_Makefiles() { #
	870	#--------------------------------------#
	871	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
[0170229]	872
	873	for file in bootscripts/* ; do
	874	# Keep the script file name
	875	this_script=`basename $file`
	876
	877	case $this_script in
[9485eba]	878	*udev) continue ;; # This is not a script but a commentary
[0170229]	879	console) continue ;; # Use the files that came with the bootscripts
	880	*) ;;
	881	esac
	882
	883	# First append each name of the script files to a list (this will become
	884	# the names of the targets in the Makefile
	885	bootscripttools="$bootscripttools $this_script"
	886
	887	# Grab the name of the target, strip id number, XXX-script
	888	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	889	-e 's@-64bit@@' \
	890	-e 's@-64@@' \
	891	-e 's@64@@' \
	892	-e 's@n32@@'`
[fd5cb46]	893	case $name in
[9485eba]	894	bootscripts) name=bootscripts-cross-lfs ;;
	895	*udev-rules) name=udev-cross-lfs ;;
[fd5cb46]	896	esac
[3b63c8c]	897
	898	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	899
	900	#--------------------------------------------------------------------#
	901	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	902	#--------------------------------------------------------------------#
	903	#
	904	# Drop in the name of the target on a new line, and the previous target
	905	# as a dependency. Also call the echo_message function.
[d14903f]	906	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	907	#
[3b63c8c]	908	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	909	#
[d14903f]	910	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
[0170229]	911	#
[d14903f]	912	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	913	#
[d14903f]	914	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	915	#
	916	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	917	wrt_touch
[0170229]	918	#
	919	#--------------------------------------------------------------------#
	920	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	921	#--------------------------------------------------------------------#
	922	#
	923	# Keep the script file name for Makefile dependencies.
	924	PREV=$this_script
	925
	926	done # for file in bootscripts/* ...
	927	}
	928
[d14903f]	929	#--------------------------------------#
	930	chroot_bootable_Makefiles() { #
	931	#--------------------------------------#
	932	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
[0170229]	933
[7f38b6d]	934	for file in {bootable,the-end}/* ; do
[0170229]	935	# Keep the script file name
	936	this_script=`basename $file`
	937
	938	# A little housekeeping on the scripts
	939	case $this_script in
[7f38b6d]	940	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[d14903f]	941	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[87b93b4]	942	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	943	[[ -z $CONFIG ]] && continue
[0271c0c]	944	# Copy the config file to /sources with a standardized name
[1917cad]	945	cp $CONFIG $BUILDDIR/sources/kernel-config
[87b93b4]	946	;;
[0170229]	947	esac
	948	#
	949	# First append each name of the script files to a list (this will become
	950	# the names of the targets in the Makefile
	951	bootabletools="$bootabletools $this_script"
	952	#
	953	# Grab the name of the target, strip id number and misc words.
	954	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
[fd5cb46]	955	case $this_script in
	956	kernel) name=linux
	957	;;
	958	esac
[3b63c8c]	959
	960	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	961
	962	#--------------------------------------------------------------------#
	963	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	964	#--------------------------------------------------------------------#
	965	#
	966	# Drop in the name of the target on a new line, and the previous target
	967	# as a dependency. Also call the echo_message function.
[d14903f]	968	CHROOT_wrt_target "${this_script}" "$PREV"
[0170229]	969	#
[3b63c8c]	970	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	971	# Insert instructions for unpacking the package and changing directories
	972	#
[d14903f]	973	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[0170229]	974	#
	975	# Select a script execution method
	976	case $this_script in
[d14903f]	977	fstab) if [[ -n "$FSTAB" ]]; then
	978	CHROOT_wrt_CopyFstab
	979	else
	980	CHROOT_wrt_RunAsRoot "${file}"
	981	fi
	982	;;
	983	*) CHROOT_wrt_RunAsRoot "${file}"
	984	;;
[0170229]	985	esac
	986	#
	987	# Housekeeping...remove any build directory(ies) except if the package build fails.
[d14903f]	988	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[0170229]	989	#
	990	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	991	wrt_touch
[0170229]	992	#
	993	#--------------------------------------------------------------------#
	994	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	995	#--------------------------------------------------------------------#
	996	#
	997	# Keep the script file name for Makefile dependencies.
	998	PREV=$this_script
	999
	1000	done
	1001
[9e4b9a1]	1002	# Add SBU-disk_usage report target if required
[47fddc8]	1003	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[9e4b9a1]	1004
[0170229]	1005	}
	1006
[d14903f]	1007	#--------------------------------------#
	1008	boot_bootable_Makefiles() { #
	1009	#--------------------------------------#
	1010	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
[0170229]	1011
[7f38b6d]	1012	for file in {bootable,the-end}/* ; do
[0170229]	1013	# Keep the script file name
	1014	this_script=`basename $file`
	1015
	1016	# A little housekeeping on the scripts
	1017	case $this_script in
[7f38b6d]	1018	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[b83baf6]	1019	*kernel) # if there is no kernel config file do not build the kernel
[4845f38]	1020	[[ -z $CONFIG ]] && continue
[0271c0c]	1021	# Copy the named config file to /sources with a standardized name
[62033d2]	1022	cp $CONFIG $BUILDDIR/sources/kernel-config
[0170229]	1023	;;
	1024	esac
	1025	#
	1026	# First append each name of the script files to a list (this will become
	1027	# the names of the targets in the Makefile
	1028	bootabletools="$bootabletools $this_script"
	1029	#
	1030	# Grab the name of the target, strip id number and misc words.
	1031	case $this_script in
[3b63c8c]	1032	*kernel) name=linux ;;
[0170229]	1033	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	1034	esac
	1035
[3b63c8c]	1036	pkg_tarball=$(get_package_tarball_name $name)
[0170229]	1037
	1038	#--------------------------------------------------------------------#
	1039	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	1040	#--------------------------------------------------------------------#
	1041	#
	1042	# Drop in the name of the target on a new line, and the previous target
	1043	# as a dependency. Also call the echo_message function.
[d14903f]	1044	BOOT_wrt_target "${this_script}" "$PREV"
[0170229]	1045	#
[3b63c8c]	1046	# If $pkg_tarball isn't empty, we've got a package...
[0170229]	1047	# Insert instructions for unpacking the package and changing directories
	1048	#
[d14903f]	1049	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
[0170229]	1050	#
	1051	# Select a script execution method
	1052	case $this_script in
	1053	fstab) if [[ -n "$FSTAB" ]]; then
[a9490ab]	1054	# Minimal boot mode has no access to original file, store in /sources
	1055	cp $FSTAB $BUILDDIR/sources/fstab
[d14903f]	1056	BOOT_wrt_CopyFstab "${this_script}"
[0170229]	1057	else
[d14903f]	1058	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
[0170229]	1059	fi
	1060	;;
[d14903f]	1061	*) BOOT_wrt_RunAsRoot "${this_script}" "${file}" ;;
[0170229]	1062	esac
	1063	#
	1064	# Housekeeping...remove any build directory(ies) except if the package build fails.
[d14903f]	1065	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
[0170229]	1066	#
	1067	# Include a touch of the target name so make can check if it's already been made.
[9199a13]	1068	wrt_touch
[0170229]	1069	#
	1070	#--------------------------------------------------------------------#
	1071	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	1072	#--------------------------------------------------------------------#
	1073	#
	1074	# Keep the script file name for Makefile dependencies.
	1075	PREV=$this_script
	1076	done
	1077
[9e4b9a1]	1078	# Add SBU-disk_usage report target if required
[47fddc8]	1079	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
[9e4b9a1]	1080
[d14903f]	1081
[0170229]	1082	}
	1083
	1084
[d14903f]	1085	#--------------------------------------#
	1086	build_Makefile() { # Construct a Makefile from the book scripts
	1087	#--------------------------------------#
	1088	#
	1089	# Script crashes if error trapping is on
	1090	#
	1091	set +e
	1092	declare -f method_cmds
	1093	declare -f testsuite_cmds
	1094	declare -f final_sys_cmds
	1095	declare -f bootscripts_cmds
	1096	declare -f bootable_cmds
	1097	set -e
	1098
	1099	echo "...Creating Makefile... ${BOLD}START${OFF}"
[0170229]	1100
	1101	cd $JHALFSDIR/${PROGNAME}-commands
[d14903f]	1102	# Start with a clean files
	1103	>$MKFILE
[0170229]	1104	>$MKFILE.tmp
	1105
[d14903f]	1106	method_cmds=${METHOD}_Makefiles
	1107	testsuite_cmds=${METHOD}_testsuite_tools_Makefiles
	1108	final_sys_cmds=${METHOD}_final_system_Makefiles
	1109	bootscripts_cmds=${METHOD}_bootscripts_Makefiles
	1110	bootable_cmds=${METHOD}_bootable_Makefiles
	1111
	1112	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
	1113	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1114	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1115	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1116	if [[ ! $TEST = "0" ]]; then
	1117	$testsuite_cmds # mk_SYSTOOLS (CHROOT) $testsuitetools
[0170229]	1118	fi
[d14903f]	1119	$final_sys_cmds # mk_FINAL (CHROOT) $basicsystem
	1120	# Add the iterations targets, if needed
	1121	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
	1122	$bootscripts_cmds # mk_BOOTSCRIPT (CHROOT) $bootscripttools
	1123	$bootable_cmds # mk_BOOTABLE (CHROOT) $bootabletools
[0170229]	1124
	1125	# Add a header, some variables and include the function file
	1126	# to the top of the real Makefile.
	1127	(
	1128	cat << EOF
	1129	$HEADER
	1130
[398a037]	1131	SRC = /sources
	1132	MOUNT_PT = $BUILDDIR
	1133	PKG_LST = $PKG_LST
	1134	LUSER = $LUSER
	1135	LGROUP = $LGROUP
	1136	SCRIPT_ROOT = $SCRIPT_ROOT
	1137
	1138	BASEDIR = \$(MOUNT_PT)
	1139	SRCSDIR = \$(BASEDIR)/sources
	1140	CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands
	1141	LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs
	1142	TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs
	1143
	1144	crSRCSDIR = /sources
	1145	crCMDSDIR = /\$(SCRIPT_ROOT)/$PROGNAME-commands
	1146	crLOGDIR = /\$(SCRIPT_ROOT)/logs
	1147	crTESTLOGDIR = /\$(SCRIPT_ROOT)/test-logs
	1148
	1149	SU_LUSER = su - \$(LUSER) -c
	1150	LUSER_HOME = /home/\$(LUSER)
	1151	PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n"
[d14903f]	1152	PRT_DU_CR = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) / \`\n"
[0170229]	1153
	1154	include makefile-functions
	1155
	1156	EOF
	1157	) > $MKFILE
	1158
	1159	# Add chroot commands
[e676ffa]	1160	if [ "$METHOD" = "chroot" ] ; then
[8381f6e]	1161	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	1162	chroot=`cat chroot/chroot \| \
	1163	sed -e "s@chroot@$CHROOT_LOC@" \
	1164	-e '/#!\/tools\/bin\/bash/d' \
	1165	-e '/^export/d' \
	1166	-e '/^logout/d' \
	1167	-e 's@ \\\@ @g' \| \
	1168	tr -d '\n' \| \
	1169	sed -e 's/ */ /g' \
	1170	-e 's\|\\$\|&&\|g' \
	1171	-e 's\|exit\|\|g' \
	1172	-e 's\|$\| -c\|' \
	1173	-e 's\|"$$CLFS"\|$(MOUNT_PT)\|'\
	1174	-e 's\|set -e\|\|'`
[e676ffa]	1175	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1176	fi
[0170229]	1177
[d14903f]	1178	################## CHROOT ####################
	1179
[39d4d5c]	1180	if [[ "${METHOD}" = "chroot" ]]; then
[0170229]	1181	(
[d14903f]	1182	cat << EOF
	1183
[1ba5024]	1184	all: mk_SETUP mk_CROSS mk_TEMP restore_luser_env mk_SYSTOOLS mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE do-housekeeping
[0170229]	1185	@\$(call echo_finished,$VERSION)
	1186
[d14903f]	1187	#---------------AS ROOT
	1188	mk_SETUP:
	1189	@\$(call echo_SU_request)
	1190	@sudo make SETUP
	1191	@touch \$@
	1192
	1193	#---------------AS LUSER
	1194	mk_CROSS: mk_SETUP
	1195	@\$(call echo_PHASE,Cross Tool)
	1196	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" )
	1197	@touch \$@
	1198
	1199	mk_TEMP: mk_CROSS
	1200	@\$(call echo_PHASE,Temporary Tools)
	1201	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" )
	1202	@touch \$@
	1203
	1204	#
	1205	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
	1206	# chroot environment. (Unless someone knows a different way)
	1207	# Manually create the /bin directory and provide link to the /tools dir.
	1208	# Also change the original symlink creation to include (f)orce to prevent failure due to
	1209	# pre-existing links.
	1210
	1211	#---------------CHROOT JAIL
	1212	mk_SYSTOOLS: mk_TEMP $orphan_scripts
	1213	@mkdir \$(MOUNT_PT)/bin && \\
	1214	cd \$(MOUNT_PT)/bin && \\
	1215	ln -sf /tools/bin/bash bash; ln -sf bash sh
	1216	@sed -e 's\|^ln -sv\|ln -svf\|' -i \$(CMDSDIR)/chroot/082-createfiles
	1217	@\$(call echo_CHROOT_request)
	1218	@\$(call echo_PHASE, Chroot systools)
	1219	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make SYSTOOLS")
	1220	@touch \$@
	1221
	1222	mk_FINAL: mk_SYSTOOLS
	1223	@\$(call echo_PHASE,Final System)
	1224	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make FINAL")
	1225	@touch \$@
	1226
	1227	mk_BOOTSCRIPT: mk_FINAL
	1228	@\$(call echo_PHASE,Bootscript)
	1229	@\$(call echo_CHROOT_request)
	1230	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTSCRIPT")
	1231	@touch \$@
	1232
	1233	mk_BOOTABLE: mk_BOOTSCRIPT
	1234	@\$(call echo_PHASE, Make bootable )
	1235	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTABLE")
	1236	@touch \$@
[0170229]	1237
[d14903f]	1238	EOF
	1239	) >> $MKFILE
	1240	fi
[0170229]	1241
[d14903f]	1242	################### BOOT #####################
[0170229]	1243
[d14903f]	1244	if [[ "${METHOD}" = "boot" ]]; then
	1245	(
	1246	cat << EOF
[0170229]	1247
[d14903f]	1248	all: mk_SETUP mk_CROSS mk_TEMP mk_SYSTOOLS $orphan_scripts restore-luser-env
	1249	@\$(call echo_boot_finished,$VERSION)
[0170229]	1250
[d14903f]	1251	makesys: mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE
	1252	@\$(call echo_finished,$VERSION)
[0170229]	1253
[d14903f]	1254	#---------------AS ROOT
[0170229]	1255
[d14903f]	1256	mk_SETUP:
	1257	@\$(call echo_SU_request)
	1258	@sudo make SETUP
	1259	@touch \$@
[0170229]	1260
[d14903f]	1261	#---------------AS LUSER
	1262
	1263	mk_CROSS: mk_SETUP
	1264	@\$(call echo_PHASE,Cross Tool)
	1265	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" )
	1266	@touch \$@
[0170229]	1267
[d14903f]	1268	mk_TEMP: mk_CROSS
	1269	@\$(call echo_PHASE,Temporary Tools)
	1270	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" )
	1271	@touch \$@
[3b63c8c]	1272
[d14903f]	1273	mk_SYSTOOLS: mk_TEMP
	1274	@\$(call echo_PHASE,Minimal Boot system)
	1275	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SYSTOOLS" )
	1276	@touch \$@
	1277
	1278	#---------------AS ROOT
[0170229]	1279
[d14903f]	1280	mk_FINAL:
	1281	@\$(call echo_PHASE,Final System)
	1282	@( make FINAL )
	1283	@touch \$@
	1284
	1285	mk_BOOTSCRIPT: mk_FINAL
	1286	@\$(call echo_PHASE,Bootscript)
	1287	@( make BOOTSCRIPT )
	1288	@touch \$@
	1289
	1290	mk_BOOTABLE: mk_BOOTSCRIPT
	1291	@\$(call echo_PHASE,Making Bootable)
	1292	@( make BOOTABLE )
	1293	@touch \$@
	1294
	1295	EOF
	1296	) >> $MKFILE
	1297	fi
	1298
	1299	(
	1300	cat << EOF
	1301
	1302	SETUP: $host_prep
	1303	CROSS: $cross_tools
	1304	TEMP: $temptools
	1305	SYSTOOLS: ${chroottools}${boottools}
	1306	FINAL: $testsuitetools $basicsystem
	1307	BOOTSCRIPT: $bootscripttools
	1308	BOOTABLE: $bootabletools
	1309
	1310	restart:
	1311	@echo "This feature does not exist for the CLFS makefile. (yet)"
[0170229]	1312
[30737ea8]	1313	restore-luser-env:
[0170229]	1314	@\$(call echo_message, Building)
[9485eba]	1315	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	1316	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[0170229]	1317	fi;
[9485eba]	1318	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	1319	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[0170229]	1320	fi;
[9485eba]	1321	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[9199a13]	1322	touch \$@ && \\
	1323	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1324	echo --------------------------------------------------------------------------------\$(WHITE)
[0170229]	1325
[3a27393]	1326	do-housekeeping:
[9199a13]	1327	@-umount \$(MOUNT_PT)/dev/pts
	1328	@-umount \$(MOUNT_PT)/dev/shm
	1329	@-umount \$(MOUNT_PT)/dev
	1330	@-umount \$(MOUNT_PT)/sys
	1331	@-umount \$(MOUNT_PT)/proc
[30737ea8]	1332	@-if [ ! -f luser-exist ]; then \\
[9485eba]	1333	userdel \$(LUSER); \\
	1334	rm -rf /home/\$(LUSER); \\
[3a27393]	1335	fi;
	1336
[d14903f]	1337	########################################################
[39d4d5c]	1338
[3a27393]	1339
[39d4d5c]	1340	EOF
	1341	) >> $MKFILE
[0170229]	1342
	1343	# Bring over the items from the Makefile.tmp
	1344	cat $MKFILE.tmp >> $MKFILE
	1345	rm $MKFILE.tmp
	1346
[d14903f]	1347	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[0170229]	1348	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: