Context Navigation

source: CLFS/master.sh@ e218205

2.4

Last change on this file since e218205 was b37d5e3, checked in by Pierre Labastie <pierre@…>, 7 years ago
Merge trunk-r3965
Property mode set to `100644`
File size: 43.7 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[269d81c]	21	@install -dv \$(MOUNT_PT)/tools && \\
[e314f7e]	22	rm -f /tools && \\
[dbcdfd7]	23	ln -s \$(MOUNT_PT)/tools /
	24	@\$(call housekeeping)
[877cc6a]	25
	26	024-creatingcrossdir: 023-creatingtoolsdir
[9ae0875]	27	@\$(call echo_message, Building)
[269d81c]	28	@install -dv \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	29	rm -f /cross-tools && \\
[dbcdfd7]	30	ln -s \$(MOUNT_PT)/cross-tools /
	31	@\$(call housekeeping)
[877cc6a]	32
	33	025-addinguser: 024-creatingcrossdir
	34	@\$(call echo_message, Building)
[962793a]	35	@if [ ! -d \$(LUSER_HOME) ]; then \\
[269d81c]	36	groupadd \$(LGROUP); \\
	37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
	38	mkdir -pv \$(LUSER_HOME); \\
	39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
[877cc6a]	40	else \\
[269d81c]	41	touch luser-exist; \\
	42	fi
	43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
	44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
[9ae0875]	45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[dbcdfd7]	46	chmod a+wt \$(SRCSDIR)
	47	@\$(call housekeeping)
[877cc6a]	48
	49	026-settingenvironment: 025-addinguser
	50	@\$(call echo_message, Building)
[962793a]	51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[269d81c]	53	fi
[962793a]	54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[877cc6a]	56	fi;
[962793a]	57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
[5f154f1]	66	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
[962793a]	67	echo "" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	68	EOF
	69	) >> $MKFILE.tmp
	70	if ! [ -e final-preps/*variables ]; then
	71	(
	72	cat << EOF
[962793a]	73	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	74	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	75	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
[3f83cb0]	76	EOF
	77	) >> $MKFILE.tmp
	78	fi
	79	(
	80	cat << EOF
[962793a]	81	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	82	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[e18f80a]	83	chmod a+wt \$(MOUNT_PT) && \\
[b2c7742]	84	if [ -d \$(MOUNT_PT)/var ]; then \\
	85	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
	86	fi && \\
[877cc6a]	87	touch envars && \\
[e18f80a]	88	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	89	@\$(call housekeeping)
[877cc6a]	90	EOF
	91	) >> $MKFILE.tmp
[045b2dc]	92	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	93
	94	}
	95
[3f83cb0]	96	#--------------------------------------#
	97	final_preps_Makefiles() {
	98	#--------------------------------------#
	99	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
	100	for file in final-preps/* ; do
	101	this_script=`basename $file`
	102	case $this_script in
	103	*variables )
	104	;;
	105	*) continue; ;;
	106	esac
	107	# Set the dependency for the first target.
	108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	109
	110	# First append each name of the script files to a list (this will become
	111	# the names of the targets in the Makefile
	112	final_preps="$final_preps $this_script"
	113
	114	# No need to grab the package name
	115
	116	LUSER_wrt_target "${this_script}" "$PREV"
	117	LUSER_wrt_RunAsUser "${file}"
	118	wrt_touch
	119	PREV=$this_script
	120	done # for file in ....
	121	}
	122
[045b2dc]	123	#--------------------------------------#
	124	cross_tools_Makefiles() { #
	125	#--------------------------------------#
	126	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	127
	128	for file in cross-tools/* ; do
	129	# Keep the script file name
	130	this_script=`basename $file`
	131	#
	132	# Skip this script...
	133	case $this_script in
	134	cflags \| variables ) # work done in host_prep_Makefiles
	135	continue; ;;
	136	*) ;;
	137	esac
	138	#
	139	# Set the dependency for the first target.
	140	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	141
	142	# First append each name of the script files to a list (this will become
	143	# the names of the targets in the Makefile
	144	cross_tools="$cross_tools $this_script"
	145
	146	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	147	# and binutils in chapter 5)
	148	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	149	-e 's@-static@@' \
	150	-e 's@-final@@' \
[480295c]	151	-e 's@-64@@' \
[82808d1]	152	-e 's@-n32@@' \
	153	-e 's@-pass1@@'`
[a160d86]	154	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	155
	156	#--------------------------------------------------------------------#
	157	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	158	#--------------------------------------------------------------------#
	159	#
	160	# Drop in the name of the target on a new line, and the previous target
	161	# as a dependency. Also call the echo_message function.
[045b2dc]	162	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	163	#
[a160d86]	164	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	165	#
[045b2dc]	166	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	167	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
[877cc6a]	168	#
[045b2dc]	169	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	170	#
[045b2dc]	171	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	172	#
	173	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	174	wrt_touch
[877cc6a]	175	#
	176	#--------------------------------------------------------------------#
	177	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	178	#--------------------------------------------------------------------#
	179	#
	180	# Keep the script file name for Makefile dependencies.
	181	PREV=$this_script
	182
	183	done # for file in ....
	184	}
	185
[045b2dc]	186	#--------------------------------------#
	187	temptools_Makefiles() { #
	188	#--------------------------------------#
	189	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	190
	191	for file in temp-system/* ; do
	192	# Keep the script file name
	193	this_script=`basename $file`
[6f2cd96]	194	#
	195	# Deal with any odd scripts..
	196	case $this_script in
	197	*choose) # The choose script will fail if you cannot enter the new environment
	198	# If the 'boot' build method was chosen don't run the script
	199	[[ $METHOD = "boot" ]] && continue; ;;
	200	*) ;;
	201	esac
[e2ec07a]	202
[877cc6a]	203	#
	204	# First append each name of the script files to a list (this will become
	205	# the names of the targets in the Makefile
	206	temptools="$temptools $this_script"
	207
	208	#
	209	# Grab the name of the target, strip id number, XXX-script
	210	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	211	#
[a160d86]	212	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	213
	214	#--------------------------------------------------------------------#
	215	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	216	#--------------------------------------------------------------------#
	217	#
	218	# Drop in the name of the target on a new line, and the previous target
	219	# as a dependency. Also call the echo_message function.
[045b2dc]	220	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	221	#
[a160d86]	222	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	223	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	224	#
[045b2dc]	225	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	226	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	227	#
[045b2dc]	228	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	229	#
[045b2dc]	230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	231	#
	232	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	233	wrt_touch
[877cc6a]	234	#
	235	#--------------------------------------------------------------------#
	236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	237	#--------------------------------------------------------------------#
	238	#
	239	# Keep the script file name for Makefile dependencies.
	240	PREV=$this_script
	241	done # for file in ....
	242	}
	243
	244
[045b2dc]	245	#--------------------------------------#
	246	chroot_Makefiles() { #
	247	#--------------------------------------#
	248	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	249
[045b2dc]	250	for file in chroot/* ; do
[877cc6a]	251	# Keep the script file name
	252	this_script=`basename $file`
[045b2dc]	253	#
	254	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	255	case $this_script in
[045b2dc]	256	chroot) continue ;;
[877cc6a]	257	esac
[045b2dc]	258
[877cc6a]	259	#
	260	# First append each name of the script files to a list (this will become
	261	# the names of the targets in the Makefile
[045b2dc]	262	case "${this_script}" in
	263	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	264	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	265	esac
[045b2dc]	266
	267	# Grab the name of the target, strip id number, XXX-script
	268	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	269
[a160d86]	270	pkg_tarball=$(get_package_tarball_name $name)
	271
[045b2dc]	272	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
[608fbe1]	273	# Same for e2fsprogs (in CLFS 1.1.0)
[045b2dc]	274	# .. Customized makefile entry
	275	case "${this_script}" in
	276	*util-linux)
	277	LUSER_wrt_target "${this_script}" "$PREV"
	278	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	279	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	280	LUSER_wrt_RunAsUser "${file}"
	281	LUSER_RemoveBuildDirs "${name}"
	282	wrt_touch
[480295c]	283	temptools="$temptools $this_script"
	284	continue ;;
[608fbe1]	285	*util-linux-ng)
	286	LUSER_wrt_target "${this_script}" "$PREV"
	287	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	288	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	289	LUSER_wrt_RunAsUser "${file}"
	290	LUSER_RemoveBuildDirs "${name}"
	291	wrt_touch
	292	temptools="$temptools $this_script"
	293	continue ;;
	294	*util-linux-libs)
	295	LUSER_wrt_target "${this_script}" "$PREV"
	296	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	297	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	298	LUSER_wrt_RunAsUser "${file}"
	299	LUSER_RemoveBuildDirs "${name}"
	300	wrt_touch
	301	temptools="$temptools $this_script"
	302	continue ;;
	303	*e2fsprogs)
	304	LUSER_wrt_target "${this_script}" "$PREV"
	305	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	306	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	307	LUSER_wrt_RunAsUser "${file}"
	308	LUSER_RemoveBuildDirs "${name}"
	309	wrt_touch
	310	temptools="$temptools $this_script"
	311	continue ;;
	312	*e2fsprogs-libs)
	313	LUSER_wrt_target "${this_script}" "$PREV"
	314	LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	315	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[608fbe1]	316	LUSER_wrt_RunAsUser "${file}"
	317	LUSER_RemoveBuildDirs "${name}"
	318	wrt_touch
	319	temptools="$temptools $this_script"
	320	continue ;;
[045b2dc]	321	esac
	322
	323
[877cc6a]	324	#--------------------------------------------------------------------#
	325	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	326	#--------------------------------------------------------------------#
	327	#
	328	# Drop in the name of the target on a new line, and the previous target
	329	# as a dependency. Also call the echo_message function.
[045b2dc]	330	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	331	#
[a160d86]	332	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	333	# Insert instructions for unpacking the package and changing directories
	334	#
[045b2dc]	335	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	336	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	337	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[045b2dc]	338	fi
[877cc6a]	339	#
	340	# Select a script execution method
	341	case $this_script in
[8f2c086]	342	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	343	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	344	esac
	345	#
[045b2dc]	346	# Housekeeping...remove the build directory(ies), except if the package build fails.
	347	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	348	#
	349	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	350	wrt_touch
[877cc6a]	351	#
	352	#--------------------------------------------------------------------#
	353	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	354	#--------------------------------------------------------------------#
	355	#
	356	# Keep the script file name for Makefile dependencies.
	357	PREV=$this_script
	358
[045b2dc]	359	done # for file in...
[877cc6a]	360	}
	361
	362
[045b2dc]	363	#--------------------------------------#
	364	boot_Makefiles() { #
	365	#--------------------------------------#
[877cc6a]	366
[045b2dc]	367	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	368	#
	369	# Create a target bootable partition containing a compile environment. Later
	370	# on we boot into this environment and contine the build.
	371	#
	372	for file in boot/* ; do
[877cc6a]	373	# Keep the script file name
	374	this_script=`basename $file`
[045b2dc]	375
	376	# A little housekeeping on the scripts
[877cc6a]	377	case $this_script in
[f940c29]	378	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
[179ae85]	379	how-to-view) continue ;;
[045b2dc]	380	whatnext) continue ;;
[d601cfc]	381	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	382	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	383	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[045b2dc]	384	*kernel) # if there is no kernel config file do not build the kernel
[85506da]	385	[[ -z $BOOT_CONFIG ]] && continue
[045b2dc]	386	# Copy the config file to /sources with a standardized name
[85506da]	387	[[ ${BOOT_CONFIG} == $BUILDDIR/sources/bootkernel-config ]] \|\|
[045b2dc]	388	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	389	;;
[877cc6a]	390	esac
	391	#
	392	# First append each name of the script files to a list (this will become
[179ae85]	393	# the names of the targets in the Makefile). Those names differ depending
	394	# on the version of the book. What makes the difference between those
	395	# versions is the presence of "how-to-view" in the boot chapter.
	396	if [ -f boot/*how-to-view ]; then
	397	case "${this_script}" in
	398	*changingowner)
	399	orphan_scripts="${orphan_scripts} ${this_script}"
	400	;;
	401	*creatingdirs)
	402	orphan_scripts="${orphan_scripts} ${this_script}"
	403	;;
	404	*createfiles)
	405	orphan_scripts="${orphan_scripts} ${this_script}"
	406	;;
	407	*devices)
	408	orphan_scripts="${orphan_scripts} ${this_script}"
	409	;;
	410	*flags)
	411	orphan_scripts="${orphan_scripts} ${this_script}"
	412	;;
	413	*fstab)
	414	orphan_scripts="${orphan_scripts} ${this_script}"
	415	;;
	416	*pwdgroup)
	417	orphan_scripts="${orphan_scripts} ${this_script}"
	418	;;
	419	*settingenvironment)
	420	orphan_scripts="${orphan_scripts} ${this_script}"
	421	;;
	422	*)
	423	boottools="$boottools $this_script"
	424	;;
	425	esac
	426	else
	427	case "${this_script}" in
	428	*changingowner)
	429	orphan_scripts="${orphan_scripts} ${this_script}"
	430	;;
	431	*devices)
	432	orphan_scripts="${orphan_scripts} ${this_script}"
	433	;;
	434	*)
	435	boottools="$boottools $this_script"
	436	;;
	437	esac
	438	fi
[045b2dc]	439	#
	440	# Grab the name of the target, strip id number and misc words.
	441	case $this_script in
[179ae85]	442	*kernel) name=linux ;;
	443	*bootscripts) name="bootscripts-cross-lfs" ;;
	444	*boot-scripts) name="boot-scripts-cross-lfs" ;;
	445	*udev-rules) name="udev-cross-lfs" ;;
	446	*grub-build) name=grub ;;
	447	*-aboot-build) name=aboot ;;
	448	*yaboot-build) name=yaboot ;;
	449	*colo-build) name=colo ;;
	450	*silo-build) name=silo ;;
	451	*arcload-build) name=arcload ;;
	452	*lilo-build) name=lilo ;;
[045b2dc]	453	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	454	esac
	455	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	456	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	457
	458	#--------------------------------------------------------------------#
	459	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	460	#--------------------------------------------------------------------#
	461	#
	462	# Drop in the name of the target on a new line, and the previous target
	463	# as a dependency. Also call the echo_message function.
[045b2dc]	464	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	465	#
[a160d86]	466	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	467	# Insert instructions for unpacking the package and changing directories
	468	#
[045b2dc]	469	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[ce262a7]	470	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	471	#
	472	# Select a script execution method
[179ae85]	473	if [ -f boot/*how-to-view ]; then
	474	case $this_script in
	475	# The following 8 scripts are defined in the /boot directory but need
	476	# to be run as a root user. Set them up here but run them in another
	477	# phase
	478	*changingowner) wrt_RunAsRoot "${file}" ;;
	479	*creatingdirs) wrt_RunAsRoot "${file}" ;;
	480	*createfiles) wrt_RunAsRoot "${file}" ;;
	481	*devices) wrt_RunAsRoot "${file}" ;;
	482	*flags) wrt_RunAsRoot "${file}" ;;
	483	*fstab)
	484	if [[ -n "$FSTAB" ]]; then
	485	LUSER_wrt_CopyFstab
	486	else
	487	wrt_RunAsRoot "${file}"
	488	fi
	489	;;
	490	*pwdgroup) wrt_RunAsRoot "${file}" ;;
	491	*settingenvironment) wrt_RunAsRoot "${file}" ;;
	492	*) LUSER_wrt_RunAsUser "${file}" ;;
	493	esac
	494	else
	495	case $this_script in
	496	# The following 2 scripts are defined in the /boot directory but need
	497	# to be run as a root user. Set them up here but run them in another
	498	# phase
	499	*changingowner) wrt_RunAsRoot "${file}" ;;
	500	*devices) wrt_RunAsRoot "${file}" ;;
	501	*fstab)
[d601cfc]	502	if [[ -n "${FSTAB}" ]]; then
[179ae85]	503	LUSER_wrt_CopyFstab
	504	else
	505	LUSER_wrt_RunAsUser "${file}"
	506	fi
	507	;;
	508	*) LUSER_wrt_RunAsUser "${file}" ;;
	509	esac
	510	fi
[877cc6a]	511	#
[045b2dc]	512	# Housekeeping...remove any build directory(ies) except if the package build fails.
	513	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	514	#
	515	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	516	wrt_touch
[877cc6a]	517	#
	518	#--------------------------------------------------------------------#
	519	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	520	#--------------------------------------------------------------------#
	521	#
	522	# Keep the script file name for Makefile dependencies.
	523	PREV=$this_script
	524
[045b2dc]	525	done
[877cc6a]	526	}
	527
	528
[045b2dc]	529	#--------------------------------------#
[d55a1a1]	530	testsuite_tools_Makefiles() { #
[045b2dc]	531	#--------------------------------------#
[877cc6a]	532
[d55a1a1]	533	if [[ "${METHOD}" = "chroot" ]]; then
	534	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	535	else
	536	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
[010627d]	537	PREV=""
[d55a1a1]	538	fi
[877cc6a]	539
	540	for file in testsuite-tools/* ; do
	541	# Keep the script file name
	542	this_script=`basename $file`
	543
	544	# First append each name of the script files to a list (this will become
	545	# the names of the targets in the Makefile
	546	testsuitetools="$testsuitetools $this_script"
	547
	548	# Grab the name of the target, strip id number, XXX-script
	549	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	550	-e 's@-64bit@@' \
	551	-e 's@-64@@' \
	552	-e 's@64@@' \
	553	-e 's@n32@@'`
	554
[a160d86]	555	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	556
	557	#--------------------------------------------------------------------#
	558	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	559	#--------------------------------------------------------------------#
	560	#
	561	# Drop in the name of the target on a new line, and the previous target
	562	# as a dependency. Also call the echo_message function.
[ca6b261]	563	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	564	#
[ca6b261]	565	CHROOT_Unpack "$pkg_tarball"
[ce262a7]	566	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	567	#
[ca6b261]	568	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	569	#
[ca6b261]	570	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	571	#
	572	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	573	wrt_touch
[877cc6a]	574	#
	575	#--------------------------------------------------------------------#
	576	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	577	#--------------------------------------------------------------------#
	578	#
	579	# Keep the script file name for Makefile dependencies.
	580	PREV=$this_script
	581
	582	done
	583	}
	584
	585
[045b2dc]	586	#--------------------------------------#
[d55a1a1]	587	final_system_Makefiles() { #
[045b2dc]	588	#--------------------------------------#
[45f82718]	589	# Set envars and scripts for iteration targets
	590	if [[ -z "$1" ]] ; then
	591	local N=""
[d55a1a1]	592	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	593	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	594	else
	595	local N=-build_$1
	596	local basicsystem=""
	597	mkdir final-system$N
	598	cp final-system/* final-system$N
	599	for script in final-system$N/* ; do
	600	# Overwrite existing symlinks, files, and dirs
	601	sed -e 's/ln -sv/&f/g' \
	602	-e 's/mv -v/&f/g' \
	603	-e 's/mkdir -v/&p/g' -i ${script}
[10c8b78]	604	# Rename the scripts
	605	mv ${script} ${script}$N
[45f82718]	606	done
[a5f52ba]	607	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
[10c8b78]	608	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
[45f82718]	609	# Delete *old Readline libraries just after make install
[10c8b78]	610	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
[45f82718]	611	fi
	612
[d55a1a1]	613	if [[ "${METHOD}" = "chroot" ]]; then
	614	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	615	else
	616	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	617	fi
[877cc6a]	618
[45f82718]	619	for file in final-system$N/* ; do
[877cc6a]	620	# Keep the script file name
	621	this_script=`basename $file`
	622
[45f82718]	623	# Test if the stripping phase must be skipped.
[4384929]	624	# Skip also temp-perl for iterative runs
[877cc6a]	625	case $this_script in
[401f81e]	626	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	627	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	628	esac
	629
[4384929]	630	# Grab the name of the target, strip id number, XXX-script.
	631	# name1 is partially stripped and should be used for logging files.
	632	# name is completely stripped and is used for grabbing
	633	# the package name.
	634	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	635	-e 's,'$N',,'`
	636	name=`echo $name1 \| sed -e 's@temp-@@' \
	637	-e 's@-64bit@@' \
	638	-e 's@-64@@' \
	639	-e 's@64@@' \
	640	-e 's@n32@@'`
[877cc6a]	641
[45f82718]	642	# Find the version of the command files, if it corresponds with the building of
	643	# a specific package. We need this here to can skip scripts not needed for
	644	# iterations rebuilds
[a160d86]	645	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	646
[a160d86]	647	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	648	case "${this_script}" in
	649	stripping) ;;
	650	*) continue ;;
	651	esac
	652	fi
	653
	654	# Append each name of the script files to a list (this will become
	655	# the names of the targets in the Makefile
[10c8b78]	656	basicsystem="$basicsystem ${this_script}"
[45f82718]	657
[877cc6a]	658	#--------------------------------------------------------------------#
	659	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	660	#--------------------------------------------------------------------#
	661	#
	662	# Drop in the name of the target on a new line, and the previous target
	663	# as a dependency. Also call the echo_message function.
[10c8b78]	664	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	665
[a160d86]	666	# If $pkg_tarball isn't empty, we've got a package...
	667	if [ "$pkg_tarball" != "" ] ; then
[f546320]	668	# Touch timestamp file if installed files logs will be created.
	669	# But only for the firt build when running iterative builds.
	670	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
	671	CHROOT_wrt_TouchTimestamp
	672	fi
[045b2dc]	673	CHROOT_Unpack "$pkg_tarball"
[a229600]	674	# If the testsuites must be run, initialize the log file
	675	case $name in
[269d81c]	676	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
[10c8b78]	677	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	678	;;
	679	* )
[10c8b78]	680	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	681	;;
	682	esac
	683	# If using optimizations, write the instructions
[1b65a84]	684	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	685	fi
	686	#
[045b2dc]	687	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	688	#
[f546320]	689	# Write installed files log and remove the build directory(ies)
	690	# except if the package build fails.
	691	if [ "$pkg_tarball" != "" ] ; then
	692	CHROOT_wrt_RemoveBuildDirs "$name"
	693	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
[4384929]	694	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	695	fi
	696	fi
[877cc6a]	697	#
[f546320]	698	# Include a touch of the target name so make can check
	699	# if it's already been made.
[93f38e7]	700	wrt_touch
[877cc6a]	701	#
	702	#--------------------------------------------------------------------#
	703	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	704	#--------------------------------------------------------------------#
	705	#
	706	# Keep the script file name for Makefile dependencies.
[10c8b78]	707	PREV=${this_script}
[45f82718]	708	# Set system_build envar for iteration targets
	709	system_build=$basicsystem
[877cc6a]	710	done # for file in final-system/* ...
	711	}
	712
[045b2dc]	713	#--------------------------------------#
[d55a1a1]	714	bootscripts_Makefiles() { #
[045b2dc]	715	#--------------------------------------#
[d55a1a1]	716
[c6ee8ea]	717	# New versions of the book do not have bootscripts anymore
	718	# (use systemd configuration files)
	719	# Define a variable to be used for the right script directory to parse
	720	if [ -d bootscripts ]; then
	721	config="bootscripts"
	722	else
	723	config="system-config"
	724	fi
	725
[d55a1a1]	726	if [[ "${METHOD}" = "chroot" ]]; then
[c6ee8ea]	727	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
[45f82718]	728	else
[c6ee8ea]	729	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
[45f82718]	730	fi
[877cc6a]	731
[c6ee8ea]	732	for file in $config/* ; do
[877cc6a]	733	# Keep the script file name
	734	this_script=`basename $file`
	735
	736	case $this_script in
[d601cfc]	737	*udev) continue ;; # This is not a script but a comment, we want udev-rules
[877cc6a]	738	console) continue ;; # Use the files that came with the bootscripts
[f0de954]	739	# fstab is now here (for 3.x.y)
[d601cfc]	740	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	741	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	742	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	743	*) ;;
	744	esac
	745
	746	# First append each name of the script files to a list (this will become
	747	# the names of the targets in the Makefile
	748	bootscripttools="$bootscripttools $this_script"
	749
[4384929]	750	# Grab the name of the target, strip id number, XXX-script.
	751	# name1 is partially stripped and should be used for logging files.
	752	# name is completely stripped and is used for grabbing
	753	# the package name.
	754	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	755	name=`echo $name1 \| sed -e 's@-64bit@@' \
	756	-e 's@-64@@' \
	757	-e 's@64@@' \
	758	-e 's@n32@@'`
[877cc6a]	759	case $name in
[c044e3c]	760	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	761	*udev-rules) name=udev-cross-lfs ;;
	762	esac
[c044e3c]	763
[a160d86]	764	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	765
	766	#--------------------------------------------------------------------#
	767	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	768	#--------------------------------------------------------------------#
	769	#
	770	# Drop in the name of the target on a new line, and the previous target
	771	# as a dependency. Also call the echo_message function.
[045b2dc]	772	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	773	#
[a160d86]	774	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	775	#
[f546320]	776	if [ "$pkg_tarball" != "" ] ; then
	777	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	778	CHROOT_wrt_TouchTimestamp
[f546320]	779	fi
	780	CHROOT_Unpack "$pkg_tarball"
	781	fi
[877cc6a]	782	#
[f0de954]	783	case $this_script in
	784	fstab) if [[ -n "$FSTAB" ]]; then
	785	CHROOT_wrt_CopyFstab
	786	else
	787	CHROOT_wrt_RunAsRoot "${file}"
	788	fi
	789	;;
	790	*) CHROOT_wrt_RunAsRoot "${file}"
	791	;;
	792	esac
[877cc6a]	793	#
[f546320]	794	# Write installed files log and remove the build directory(ies)
	795	# except if the package build fails.
	796	if [ "$pkg_tarball" != "" ] ; then
	797	CHROOT_wrt_RemoveBuildDirs "$name"
	798	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	799	CHROOT_wrt_LogNewFiles "$name1"
[f546320]	800	fi
	801	fi
[877cc6a]	802	#
	803	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	804	wrt_touch
[877cc6a]	805	#
	806	#--------------------------------------------------------------------#
	807	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	808	#--------------------------------------------------------------------#
	809	#
	810	# Keep the script file name for Makefile dependencies.
	811	PREV=$this_script
	812
	813	done # for file in bootscripts/* ...
	814	}
	815
[608fbe1]	816	#--------------------------------------#
	817	network_Makefiles() { #
	818	#--------------------------------------#
	819
	820	if [[ "${METHOD}" = "chroot" ]]; then
	821	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
	822	else
	823	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
	824	fi
	825
	826	for file in network/* ; do
	827	# Keep the script file name
	828	this_script=`basename $file`
	829
	830	case $this_script in
	831	*choose) continue ;; # This is not a script but a commentary.
	832	*dhcp) continue ;; # Assume static networking.
	833	*dhcpcd) continue ;; # Assume static networking.
	834	*) ;;
	835	esac
	836
	837	# First append each name of the script files to a list (this will become
	838	# the names of the targets in the Makefile
	839	networktools="$networktools $this_script"
	840
	841	# Grab the name of the target, strip id number, XXX-script
[4384929]	842	# name1 is partially stripped and should be used for logging files.
	843	# name is completely stripped and is used for grabbing
	844	# the package name.
	845	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	846	name=`echo $name1 \| sed -e 's@-64bit@@' \
	847	-e 's@-64@@' \
	848	-e 's@64@@' \
	849	-e 's@n32@@'`
[608fbe1]	850	case $name in
[b4df9e1]	851	network-scripts) name=clfs-network-scripts ;;
[608fbe1]	852	esac
	853
	854	pkg_tarball=$(get_package_tarball_name $name)
	855
	856	#--------------------------------------------------------------------#
	857	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	858	#--------------------------------------------------------------------#
	859	#
	860	# Drop in the name of the target on a new line, and the previous target
	861	# as a dependency. Also call the echo_message function.
	862	CHROOT_wrt_target "${this_script}" "$PREV"
	863	#
	864	# If $pkg_tarball isn't empty, we've got a package...
	865	#
	866	if [ "$pkg_tarball" != "" ] ; then
	867	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	868	CHROOT_wrt_TouchTimestamp
[608fbe1]	869	fi
	870	CHROOT_Unpack "$pkg_tarball"
	871	fi
	872	#
	873	CHROOT_wrt_RunAsRoot "${file}"
	874	#
	875	# Write installed files log and remove the build directory(ies)
	876	# except if the package build fails.
	877	if [ "$pkg_tarball" != "" ] ; then
	878	CHROOT_wrt_RemoveBuildDirs "$name"
	879	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	880	CHROOT_wrt_LogNewFiles "$name1"
[608fbe1]	881	fi
	882	fi
	883	#
	884	# Include a touch of the target name so make can check if it's already been made.
	885	wrt_touch
	886	#
	887	#--------------------------------------------------------------------#
	888	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	889	#--------------------------------------------------------------------#
	890	#
	891	# Keep the script file name for Makefile dependencies.
	892	PREV=$this_script
	893
	894	done # for file in network/* ...
	895	}
	896
[045b2dc]	897	#--------------------------------------#
[d55a1a1]	898	bootable_Makefiles() { #
[045b2dc]	899	#--------------------------------------#
[877cc6a]	900
[d55a1a1]	901	if [[ "${METHOD}" = "chroot" ]]; then
	902	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	903	else
	904	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	905	fi
[877cc6a]	906
	907
[936efa8]	908	for file in bootable/* ; do
[877cc6a]	909	# Keep the script file name
	910	this_script=`basename $file`
	911
	912	# A little housekeeping on the scripts
	913	case $this_script in
	914	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[d601cfc]	915	*fstab) [[ -z "${FSTAB}" ]] \|\|
[85506da]	916	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
	917	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	918	*kernel) # if there is no kernel config file do not build the kernel
	919	[[ -z $CONFIG ]] && continue
	920	# Copy the config file to /sources with a standardized name
[85506da]	921	[[ $CONFIG == $BUILDDIR/sources/kernel-config ]] \|\|
[877cc6a]	922	cp $CONFIG $BUILDDIR/sources/kernel-config
	923	;;
	924	esac
	925	#
	926	# First append each name of the script files to a list (this will become
	927	# the names of the targets in the Makefile
	928	bootabletools="$bootabletools $this_script"
	929	#
	930	# Grab the name of the target, strip id number and misc words.
	931	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	932	case $this_script in
	933	kernel) name=linux
	934	;;
	935	esac
[a160d86]	936
	937	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	938
	939	#--------------------------------------------------------------------#
	940	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	941	#--------------------------------------------------------------------#
	942	#
	943	# Drop in the name of the target on a new line, and the previous target
	944	# as a dependency. Also call the echo_message function.
[045b2dc]	945	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	946	#
[a160d86]	947	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	948	# Insert instructions for unpacking the package and changing directories
	949	#
[f546320]	950	if [ "$pkg_tarball" != "" ] ; then
	951	if [ "${INSTALL_LOG}" = "y" ] ; then
[4384929]	952	CHROOT_wrt_TouchTimestamp
[f546320]	953	fi
	954	CHROOT_Unpack "$pkg_tarball"
	955	fi
[877cc6a]	956	#
	957	# Select a script execution method
	958	case $this_script in
[045b2dc]	959	fstab) if [[ -n "$FSTAB" ]]; then
	960	CHROOT_wrt_CopyFstab
	961	else
	962	CHROOT_wrt_RunAsRoot "${file}"
	963	fi
	964	;;
	965	*) CHROOT_wrt_RunAsRoot "${file}"
	966	;;
[877cc6a]	967	esac
	968	#
[f546320]	969	# Write installed files log and remove the build directory(ies)
	970	# except if the package build fails.
	971	if [ "$pkg_tarball" != "" ] ; then
	972	CHROOT_wrt_RemoveBuildDirs "$name"
	973	if [ "${INSTALL_LOG}" = "y" ] ; then
	974	CHROOT_wrt_LogNewFiles "$name"
	975	fi
	976	fi
[877cc6a]	977	#
	978	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	979	wrt_touch
[877cc6a]	980	#
	981	#--------------------------------------------------------------------#
	982	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	983	#--------------------------------------------------------------------#
	984	#
	985	# Keep the script file name for Makefile dependencies.
	986	PREV=$this_script
	987
	988	done
	989
	990	}
	991
	992
[045b2dc]	993	#--------------------------------------#
	994	build_Makefile() { # Construct a Makefile from the book scripts
	995	#--------------------------------------#
	996
	997	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	998
	999	cd $JHALFSDIR/${PROGNAME}-commands
[730436a]	1000	# Start with clean files
[045b2dc]	1001	>$MKFILE
[877cc6a]	1002	>$MKFILE.tmp
	1003
[d55a1a1]	1004	method_cmds=${METHOD}_Makefiles
[045b2dc]	1005
	1006	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
[3f83cb0]	1007	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
[045b2dc]	1008	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	1009	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	1010	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	1011	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	1012	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	1013	fi
[d55a1a1]	1014	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	1015	# Add the iterations targets, if needed
	1016	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	1017	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
[608fbe1]	1018	if [ -d network ]; then
	1019	network_Makefiles # If present, process network setup.
	1020	fi
[d55a1a1]	1021	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	1022
[3e7ceed]	1023	# Add the CUSTOM_TOOLS targets, if needed
	1024	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[c10570d]	1025
[877cc6a]	1026	# Add a header, some variables and include the function file
	1027	# to the top of the real Makefile.
[195ed9f]	1028	wrt_Makefile_header
[877cc6a]	1029
	1030	# Add chroot commands
	1031	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	1032	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
[15c9e72]	1033	chroot=`cat chroot/???-chroot \| \
[6ad5a2f]	1034	sed -e "s@chroot@$CHROOT_LOC@" \
[830f28d]	1035	-e '/#!\/bin\/bash/d' \
[6ad5a2f]	1036	-e '/^export/d' \
	1037	-e '/^logout/d' \
	1038	-e 's@ \\\@ @g' \| \
	1039	tr -d '\n' \| \
	1040	sed -e 's/ */ /g' \
	1041	-e 's\|\\$\|&&\|g' \
	1042	-e 's\|exit\|\|g' \
	1043	-e 's\|$\| -c\|' \
[f4d9a48]	1044	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[f3a7f3b]	1045	-e 's\|set -e\|\|' \
	1046	-e 's\|set +h\|\|'`
[877cc6a]	1047	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	1048	fi
	1049
[045b2dc]	1050	################## CHROOT ####################
	1051
[877cc6a]	1052	if [[ "${METHOD}" = "chroot" ]]; then
	1053	(
[045b2dc]	1054	cat << EOF
[877cc6a]	1055
[3f83cb0]	1056	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
[045b2dc]	1057	@sudo make do-housekeeping
[936efa8]	1058	@echo "$VERSION - jhalfs build" > clfs-release && \\
[269d81c]	1059	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
	1060	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
[045b2dc]	1061	@\$(call echo_finished,$VERSION)
[a160d86]	1062
[045b2dc]	1063	ck_UID:
	1064	@if [ \`id -u\` = "0" ]; then \\
	1065	echo "+--------------------------------------------------+"; \\
	1066	echo "\|You cannot run this makefile from the root account\|"; \\
	1067	echo "+--------------------------------------------------+"; \\
	1068	exit 1; \\
	1069	fi
	1070
	1071	#---------------AS ROOT
	1072	mk_SETUP:
	1073	@\$(call echo_SU_request)
[7a43320]	1074	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1075	@touch \$@
	1076
	1077	#---------------AS LUSER
[3f83cb0]	1078	mk_F_PREPS: mk_SETUP
	1079	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
[730436a]	1080	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1081	@sudo make restore-luser-env
	1082	@touch \$@
	1083
[3f83cb0]	1084	mk_SUDO: mk_F_PREPS
[7a43320]	1085	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1086	@touch \$@
	1087
	1088	#---------------CHROOT JAIL
	1089	mk_SYSTOOLS: mk_SUDO
	1090	@\$(call echo_CHROOT_request)
	1091	@\$(call echo_PHASE, CHROOT JAIL )
[6c1b96b]	1092	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
[7a43320]	1093	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
[045b2dc]	1094	@touch \$@
[877cc6a]	1095
[269d81c]	1096	mk_BLFS_TOOL: create-sbu_du-report
	1097	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1098	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1099	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
	1100	fi;
	1101	@touch \$@
	1102
	1103	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1104	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1105	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	1106	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
[7a43320]	1107	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	1108	fi;
	1109	@touch \$@
	1110
[6c1b96b]	1111	SETUP: $host_prep
[3f83cb0]	1112	AS_LUSER: $final_preps $cross_tools $temptools
[6c1b96b]	1113	SUDO: $orphan_scripts
	1114	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
	1115	PREP_CHROOT_JAIL: ${chroottools}
	1116	CHROOT_JAIL: SHELL=/tools/bin/bash
	1117	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1118	CUSTOM_TOOLS: $custom_list
[877cc6a]	1119
[1838bc7]	1120
	1121	create-sbu_du-report: mk_SYSTOOLS
	1122	@\$(call echo_message, Building)
	1123	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	1124	./create-sbu_du-report.sh logs $VERSION; \\
	1125	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	1126	fi;
	1127	@touch \$@
	1128
[7d9a82d]	1129	do-housekeeping:
[b37d5e3]	1130	@-umount \$(MOUNT_PT)/sys
	1131	@-umount \$(MOUNT_PT)/proc
	1132	@-if mountpoint -q \$(MOUNT_PT)/run; then \\
	1133	umount \$(MOUNT_PT)/run; \\
	1134	elif [ -h \$(MOUNT_PT)/dev/shm ]; then \\
[269d81c]	1135	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
	1136	umount \$(MOUNT_PT)/\$\$link; \\
	1137	unset link; \\
	1138	else \\
	1139	umount \$(MOUNT_PT)/dev/shm; \\
	1140	fi
[b37d5e3]	1141	@-umount \$(MOUNT_PT)/dev/pts
[4524fb2]	1142	@-umount \$(MOUNT_PT)/dev
[045b2dc]	1143	@-rm /tools /cross-tools
[6ad5a2f]	1144	@-if [ ! -f luser-exist ]; then \\
	1145	userdel \$(LUSER); \\
[962793a]	1146	rm -rf \$(LUSER_HOME); \\
[7d9a82d]	1147	fi;
[877cc6a]	1148	EOF
	1149	) >> $MKFILE
[045b2dc]	1150
[877cc6a]	1151	fi
	1152
[045b2dc]	1153	################### BOOT #####################
[877cc6a]	1154
	1155	if [[ "${METHOD}" = "boot" ]]; then
	1156	(
[045b2dc]	1157	cat << EOF
[877cc6a]	1158
[3f83cb0]	1159	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
[045b2dc]	1160	@sudo make restore-luser-env
	1161	@sudo make do-housekeeping
[877cc6a]	1162	@\$(call echo_boot_finished,$VERSION)
	1163
[3e7ceed]	1164	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
[936efa8]	1165	@echo "$VERSION - jhalfs build" > /etc/clfs-release
[877cc6a]	1166	@\$(call echo_finished,$VERSION)
	1167
	1168
[045b2dc]	1169	ck_UID:
	1170	@if [ \`id -u\` = "0" ]; then \\
	1171	echo "+--------------------------------------------------+"; \\
	1172	echo "\|You cannot run this makefile from the root account\|"; \\
	1173	echo "\|However, if this is the boot environment \|"; \\
	1174	echo "\| the command you are looking for is \|"; \\
	1175	echo "\| make makesys \|"; \\
[730436a]	1176	echo "\| to complete the build \|"; \\
[045b2dc]	1177	echo "+--------------------------------------------------+"; \\
	1178	exit 1; \\
	1179	fi
[877cc6a]	1180
[045b2dc]	1181	#---------------AS ROOT
[877cc6a]	1182
[045b2dc]	1183	mk_SETUP:
	1184	@\$(call echo_SU_request)
[7a43320]	1185	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	1186	@touch \$@
	1187
	1188	#---------------AS LUSER
[a160d86]	1189
[3f83cb0]	1190	mk_F_PREPS: mk_SETUP
	1191	@\$(call echo_PHASE,Final Preparations and Cross Tools)
[730436a]	1192	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
[045b2dc]	1193	@touch \$@
	1194
[3f83cb0]	1195	mk_SUDO: mk_F_PREPS
[7a43320]	1196	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
[045b2dc]	1197	@touch \$@
	1198
	1199	#---------------AS ROOT
	1200
	1201	mk_FINAL:
	1202	@\$(call echo_PHASE,Final System)
[7a43320]	1203	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
[045b2dc]	1204	@touch \$@
	1205
[269d81c]	1206	mk_BLFS_TOOL: mk_FINAL
[e18f80a]	1207	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	1208	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
	1209	( make -C $BLFS_ROOT/work ); \\
	1210	fi;
	1211	@touch \$@
[269d81c]	1212
	1213	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
[3e7ceed]	1214	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[79da297]	1215	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3bc6078]	1216	mkdir -p ${TRACKING_DIR}; \\
[7a43320]	1217	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
[3e7ceed]	1218	fi;
	1219	@touch \$@
	1220
	1221	SETUP: $host_prep
[3f83cb0]	1222	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
[3e7ceed]	1223	SUDO: $orphan_scripts
[aec4483]	1224	AS_ROOT: SHELL=/tools/bin/bash
[3e7ceed]	1225	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
	1226	CUSTOM_TOOLS: $custom_list
[045b2dc]	1227
	1228	do-housekeeping:
	1229	@-rm /tools /cross-tools
	1230	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	1231	userdel \$(LUSER); \\
[962793a]	1232	rm -rf \$(LUSER_HOME); \\
[877cc6a]	1233	fi;
	1234
[045b2dc]	1235	EOF
	1236	) >> $MKFILE
	1237	fi
	1238
	1239	(
	1240	cat << EOF
	1241
[6ad5a2f]	1242	restore-luser-env:
[877cc6a]	1243	@\$(call echo_message, Building)
[962793a]	1244	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	1245	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[877cc6a]	1246	fi;
[962793a]	1247	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	1248	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[877cc6a]	1249	fi;
[962793a]	1250	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[93f38e7]	1251	touch \$@ && \\
	1252	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	1253	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	1254
[045b2dc]	1255	########################################################
	1256
[7d9a82d]	1257
[877cc6a]	1258	EOF
	1259	) >> $MKFILE
	1260
	1261	# Bring over the items from the Makefile.tmp
	1262	cat $MKFILE.tmp >> $MKFILE
	1263	rm $MKFILE.tmp
	1264
[045b2dc]	1265	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	1266	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: