Context Navigation

source: CLFS/master.sh@ 6bb080e

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 6bb080e was 6bb080e, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Revised compare code. Test build in progres.
Property mode set to `100644`
File size: 33.5 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@mkdir \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
25	mkdir \$(MOUNT_PT)/sources; \\
26	fi;
27	@chmod a+wt \$(MOUNT_PT)/sources && \\
28	touch \$@ && \\
29	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
30	echo --------------------------------------------------------------------------------\$(WHITE)
31
32	024-creatingcrossdir: 023-creatingtoolsdir
33	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
34	rm -f /cross-tools && \\
35	ln -s \$(MOUNT_PT)/cross-tools /
36	@touch \$@ && \\
37	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
38	echo --------------------------------------------------------------------------------\$(WHITE)
39
40	025-addinguser: 024-creatingcrossdir
41	@\$(call echo_message, Building)
42	@if [ ! -d /home/\$(LUSER) ]; then \\
43	groupadd \$(LGROUP); \\
44	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
45	else \\
46	touch luser-exist; \\
47	fi;
48	@chown \$(LUSER) \$(MOUNT_PT) && \\
49	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
50	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
51	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
52	touch \$@ && \\
53	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
54	echo --------------------------------------------------------------------------------\$(WHITE)
55
56	026-settingenvironment: 025-addinguser
57	@\$(call echo_message, Building)
58	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
59	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
60	fi;
61	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
62	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
63	fi;
64	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
65	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
66	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
67	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
68	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
69	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
70	echo "" >> /home/\$(LUSER)/.bashrc && \\
71	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
72	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
73	echo "" >> /home/\$(LUSER)/.bashrc && \\
74	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
75	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
76	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
77	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
78	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
79	touch envars && \\
80	chmod -R a+wt \$(MOUNT_PT) && \\
81	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
82	touch \$@ && \\
83	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
84	echo --------------------------------------------------------------------------------\$(WHITE)
85	EOF
86	) >> $MKFILE.tmp
87	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
88
89	}
90
91	#--------------------------------------#
92	cross_tools_Makefiles() { #
93	#--------------------------------------#
94	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
95
96	for file in cross-tools/* ; do
97	# Keep the script file name
98	this_script=`basename $file`
99	#
100	# Skip this script...
101	case $this_script in
102	cflags \| variables ) # work done in host_prep_Makefiles
103	continue; ;;
104	*) ;;
105	esac
106	#
107	# Set the dependency for the first target.
108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
109
110	# First append each name of the script files to a list (this will become
111	# the names of the targets in the Makefile
112	cross_tools="$cross_tools $this_script"
113
114	# Grab the name of the target (minus the -headers or -cross in the case of gcc
115	# and binutils in chapter 5)
116	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
117	-e 's@-static@@' \
118	-e 's@-final@@' \
119	-e 's@-64@@' \
120	-e 's@-n32@@'`
121	pkg_tarball=$(get_package_tarball_name $name)
122
123	#--------------------------------------------------------------------#
124	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
125	#--------------------------------------------------------------------#
126	#
127	# Drop in the name of the target on a new line, and the previous target
128	# as a dependency. Also call the echo_message function.
129	LUSER_wrt_target "${this_script}" "$PREV"
130	#
131	# If $pkg_tarball isn't empty, we've got a package...
132	#
133	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
134	#
135	LUSER_wrt_RunAsUser "${file}"
136	#
137	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
138	#
139	# Include a touch of the target name so make can check if it's already been made.
140	wrt_touch
141	#
142	#--------------------------------------------------------------------#
143	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
144	#--------------------------------------------------------------------#
145	#
146	# Keep the script file name for Makefile dependencies.
147	PREV=$this_script
148
149	done # for file in ....
150	}
151
152	#--------------------------------------#
153	temptools_Makefiles() { #
154	#--------------------------------------#
155	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
156
157	for file in temp-system/* ; do
158	# Keep the script file name
159	this_script=`basename $file`
160	#
161	# Deal with any odd scripts..
162	case $this_script in
163	*choose) # The choose script will fail if you cannot enter the new environment
164	# If the 'boot' build method was chosen don't run the script
165	[[ $METHOD = "boot" ]] && continue; ;;
166	*) ;;
167	esac
168
169	#
170	# First append each name of the script files to a list (this will become
171	# the names of the targets in the Makefile
172	temptools="$temptools $this_script"
173
174	#
175	# Grab the name of the target, strip id number, XXX-script
176	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
177	#
178	pkg_tarball=$(get_package_tarball_name $name)
179
180	#--------------------------------------------------------------------#
181	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
182	#--------------------------------------------------------------------#
183	#
184	# Drop in the name of the target on a new line, and the previous target
185	# as a dependency. Also call the echo_message function.
186	LUSER_wrt_target "${this_script}" "$PREV"
187	#
188	# If $pkg_tarball isn't empty, we've got a package...
189	# Insert instructions for unpacking the package and to set the PKGDIR variable.
190	#
191	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
192	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
193	#
194	LUSER_wrt_RunAsUser "${file}"
195	#
196	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
197	#
198	# Include a touch of the target name so make can check if it's already been made.
199	wrt_touch
200	#
201	#--------------------------------------------------------------------#
202	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
203	#--------------------------------------------------------------------#
204	#
205	# Keep the script file name for Makefile dependencies.
206	PREV=$this_script
207	done # for file in ....
208	}
209
210
211	#--------------------------------------#
212	chroot_Makefiles() { #
213	#--------------------------------------#
214	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
215
216	for file in chroot/* ; do
217	# Keep the script file name
218	this_script=`basename $file`
219	#
220	# Skipping scripts is done now and not included in the build tree.
221	case $this_script in
222	chroot) continue ;;
223	esac
224
225	#
226	# First append each name of the script files to a list (this will become
227	# the names of the targets in the Makefile
228	case "${this_script}" in
229	*util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
230	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
231	*) chroottools="$chroottools $this_script" ;;
232	esac
233
234	# Grab the name of the target, strip id number, XXX-script
235	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
236
237	pkg_tarball=$(get_package_tarball_name $name)
238
239	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
240	# .. Customized makefile entry
241	case "${this_script}" in
242	*util-linux)
243	LUSER_wrt_target "${this_script}" "$PREV"
244	LUSER_wrt_unpack "$pkg_tarball"
245	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
246	LUSER_wrt_RunAsUser "${file}"
247	LUSER_RemoveBuildDirs "${name}"
248	wrt_touch
249	temptools="$temptools $this_script"
250	continue ;;
251	esac
252
253
254	#--------------------------------------------------------------------#
255	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
256	#--------------------------------------------------------------------#
257	#
258	# Drop in the name of the target on a new line, and the previous target
259	# as a dependency. Also call the echo_message function.
260	CHROOT_wrt_target "${this_script}" "$PREV"
261	#
262	# If $pkg_tarball isn't empty, we've got a package...
263	# Insert instructions for unpacking the package and changing directories
264	#
265	if [ "$pkg_tarball" != "" ] ; then
266	CHROOT_Unpack "$pkg_tarball"
267	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
268	fi
269	#
270	# Select a script execution method
271	case $this_script in
272	*kernfs) wrt_RunAsRoot "${file}" ;;
273	*) CHROOT_wrt_RunAsRoot "${file}" ;;
274	esac
275	#
276	# Housekeeping...remove the build directory(ies), except if the package build fails.
277	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
278	#
279	# Include a touch of the target name so make can check if it's already been made.
280	wrt_touch
281	#
282	#--------------------------------------------------------------------#
283	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
284	#--------------------------------------------------------------------#
285	#
286	# Keep the script file name for Makefile dependencies.
287	PREV=$this_script
288
289	done # for file in...
290	}
291
292
293	#--------------------------------------#
294	boot_Makefiles() { #
295	#--------------------------------------#
296
297	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
298	#
299	# Create a target bootable partition containing a compile environment. Later
300	# on we boot into this environment and contine the build.
301	#
302	for file in boot/* ; do
303	# Keep the script file name
304	this_script=`basename $file`
305
306	# A little housekeeping on the scripts
307	case $this_script in
308	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
309	whatnext) continue ;;
310	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
311	*kernel) # if there is no kernel config file do not build the kernel
312	[[ -z $CONFIG ]] && continue
313	# Copy the config file to /sources with a standardized name
314	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
315	;;
316	esac
317	#
318	# First append each name of the script files to a list (this will become
319	# the names of the targets in the Makefile
320	case "${this_script}" in
321	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
322	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
323	*) boottools="$boottools $this_script" ;;
324	esac
325	#
326	# Grab the name of the target, strip id number and misc words.
327	case $this_script in
328	*kernel) name=linux ;;
329	*bootscripts) name="bootscripts-cross-lfs" ;;
330	*udev-rules) name="udev-cross-lfs" ;;
331	*grub-build) name=grub ;;
332	*-aboot-build) name=aboot ;;
333	*yaboot-build) name=yaboot ;;
334	*colo-build) name=colo ;;
335	*silo-build) name=silo ;;
336	*arcload-build) name=arcload ;;
337	*lilo-build) name=lilo ;;
338	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
339	esac
340	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
341	pkg_tarball=$(get_package_tarball_name $name)
342
343	#--------------------------------------------------------------------#
344	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
345	#--------------------------------------------------------------------#
346	#
347	# Drop in the name of the target on a new line, and the previous target
348	# as a dependency. Also call the echo_message function.
349	LUSER_wrt_target "${this_script}" "$PREV"
350	#
351	# If $pkg_tarball isn't empty, we've got a package...
352	# Insert instructions for unpacking the package and changing directories
353	#
354	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
355	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
356	#
357	# Select a script execution method
358	case $this_script in
359	# The following 2 scripts are defined in the /boot directory but need
360	# to be run as a root user. Set them up here but run them in another phase
361	changingowner) wrt_RunAsRoot "${file}" ;;
362	devices) wrt_RunAsRoot "${file}" ;;
363	fstab) if [[ -n "$FSTAB" ]]; then
364	LUSER_wrt_CopyFstab
365	else
366	LUSER_wrt_RunAsUser "${file}"
367	fi
368	;;
369	*) LUSER_wrt_RunAsUser "${file}" ;;
370	esac
371	#
372	# Housekeeping...remove any build directory(ies) except if the package build fails.
373	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
374	#
375	# Include a touch of the target name so make can check if it's already been made.
376	wrt_touch
377	#
378	#--------------------------------------------------------------------#
379	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
380	#--------------------------------------------------------------------#
381	#
382	# Keep the script file name for Makefile dependencies.
383	PREV=$this_script
384
385	done
386	}
387
388
389	#--------------------------------------#
390	testsuite_tools_Makefiles() { #
391	#--------------------------------------#
392
393	if [[ "${METHOD}" = "chroot" ]]; then
394	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
395	else
396	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
397	PREV=""
398	fi
399
400	for file in testsuite-tools/* ; do
401	# Keep the script file name
402	this_script=`basename $file`
403
404	# First append each name of the script files to a list (this will become
405	# the names of the targets in the Makefile
406	testsuitetools="$testsuitetools $this_script"
407
408	# Grab the name of the target, strip id number, XXX-script
409	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
410	-e 's@-64bit@@' \
411	-e 's@-64@@' \
412	-e 's@64@@' \
413	-e 's@n32@@'`
414
415	pkg_tarball=$(get_package_tarball_name $name)
416
417	#--------------------------------------------------------------------#
418	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
419	#--------------------------------------------------------------------#
420	#
421	# Drop in the name of the target on a new line, and the previous target
422	# as a dependency. Also call the echo_message function.
423	CHROOT_wrt_target "${this_script}" "$PREV"
424	#
425	CHROOT_Unpack "$pkg_tarball"
426	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
427	#
428	CHROOT_wrt_RunAsRoot "${file}"
429	#
430	CHROOT_wrt_RemoveBuildDirs "${name}"
431	#
432	# Include a touch of the target name so make can check if it's already been made.
433	wrt_touch
434	#
435	#--------------------------------------------------------------------#
436	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
437	#--------------------------------------------------------------------#
438	#
439	# Keep the script file name for Makefile dependencies.
440	PREV=$this_script
441
442	done
443	}
444
445
446	#--------------------------------------#
447	final_system_Makefiles() { #
448	#--------------------------------------#
449	# Set envars and scripts for iteration targets
450	if [[ -z "$1" ]] ; then
451	local N=""
452	# In boot method the makesys phase was initiated in testsuite_tools_makefile
453	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
454	else
455	local N=-build_$1
456	local basicsystem=""
457	mkdir final-system$N
458	cp final-system/* final-system$N
459	for script in final-system$N/* ; do
460	# Overwrite existing symlinks, files, and dirs
461	sed -e 's/ln -sv/&f/g' \
462	-e 's/mv -v/&f/g' \
463	-e 's/mkdir -v/&p/g' -i ${script}
464	done
465	# Remove Bzip2 binaries before make install
466	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
467	# Delete *old Readline libraries just after make install
468	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
469	fi
470
471	if [[ "${METHOD}" = "chroot" ]]; then
472	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
473	else
474	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
475	fi
476
477	for file in final-system$N/* ; do
478	# Keep the script file name
479	this_script=`basename $file`
480
481	# Test if the stripping phase must be skipped.
482	# Skip alsp temp-perl for iterative runs
483	case $this_script in
484	stripping) [[ "$STRIP" = "n" ]] && continue ;;
485	temp-perl) [[ -n "$N" ]] && continue ;;
486	esac
487
488	# Grab the name of the target, strip id number, XXX-script
489	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
490	-e 's@temp-@@' \
491	-e 's@-64bit@@' \
492	-e 's@-64@@' \
493	-e 's@64@@' \
494	-e 's@n32@@'`
495
496	# Find the version of the command files, if it corresponds with the building of
497	# a specific package. We need this here to can skip scripts not needed for
498	# iterations rebuilds
499	pkg_tarball=$(get_package_tarball_name $name)
500
501	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
502	case "${this_script}" in
503	stripping) ;;
504	*) continue ;;
505	esac
506	fi
507
508	# Append each name of the script files to a list (this will become
509	# the names of the targets in the Makefile
510	basicsystem="$basicsystem ${this_script}${N}"
511
512	#--------------------------------------------------------------------#
513	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
514	#--------------------------------------------------------------------#
515	#
516	# Drop in the name of the target on a new line, and the previous target
517	# as a dependency. Also call the echo_message function.
518	CHROOT_wrt_target "${this_script}${N}" "$PREV"
519
520	# If $pkg_tarball isn't empty, we've got a package...
521	if [ "$pkg_tarball" != "" ] ; then
522	CHROOT_Unpack "$pkg_tarball"
523	# If the testsuites must be run, initialize the log file
524	case $name in
525	binutils \| gcc \| glibc )
526	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}${N}"
527	;;
528	* )
529	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}${N}"
530	;;
531	esac
532	# If using optimizations, write the instructions
533	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
534	fi
535	#
536	CHROOT_wrt_RunAsRoot "${file}"
537	#
538	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
539	#
540	# Include a touch of the target name so make can check if it's already been made.
541	wrt_touch
542	#
543	#--------------------------------------------------------------------#
544	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
545	#--------------------------------------------------------------------#
546	#
547	# Keep the script file name for Makefile dependencies.
548	PREV=${this_script}${N}
549	# Set system_build envar for iteration targets
550	system_build=$basicsystem
551	done # for file in final-system/* ...
552	}
553
554	#--------------------------------------#
555	bootscripts_Makefiles() { #
556	#--------------------------------------#
557
558	if [[ "${METHOD}" = "chroot" ]]; then
559	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
560	else
561	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
562	fi
563
564	for file in bootscripts/* ; do
565	# Keep the script file name
566	this_script=`basename $file`
567
568	case $this_script in
569	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
570	console) continue ;; # Use the files that came with the bootscripts
571	*) ;;
572	esac
573
574	# First append each name of the script files to a list (this will become
575	# the names of the targets in the Makefile
576	bootscripttools="$bootscripttools $this_script"
577
578	# Grab the name of the target, strip id number, XXX-script
579	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
580	-e 's@-64bit@@' \
581	-e 's@-64@@' \
582	-e 's@64@@' \
583	-e 's@n32@@'`
584	case $name in
585	bootscripts) name=bootscripts-cross-lfs ;;
586	*udev-rules) name=udev-cross-lfs ;;
587	esac
588
589	pkg_tarball=$(get_package_tarball_name $name)
590
591	#--------------------------------------------------------------------#
592	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
593	#--------------------------------------------------------------------#
594	#
595	# Drop in the name of the target on a new line, and the previous target
596	# as a dependency. Also call the echo_message function.
597	CHROOT_wrt_target "${this_script}" "$PREV"
598	#
599	# If $pkg_tarball isn't empty, we've got a package...
600	#
601	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
602	#
603	CHROOT_wrt_RunAsRoot "${file}"
604	#
605	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
606	#
607	# Include a touch of the target name so make can check if it's already been made.
608	wrt_touch
609	#
610	#--------------------------------------------------------------------#
611	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
612	#--------------------------------------------------------------------#
613	#
614	# Keep the script file name for Makefile dependencies.
615	PREV=$this_script
616
617	done # for file in bootscripts/* ...
618	}
619
620	#--------------------------------------#
621	bootable_Makefiles() { #
622	#--------------------------------------#
623
624	if [[ "${METHOD}" = "chroot" ]]; then
625	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
626	else
627	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
628	fi
629
630
631	for file in {bootable,the-end}/* ; do
632	# Keep the script file name
633	this_script=`basename $file`
634
635	# A little housekeeping on the scripts
636	case $this_script in
637	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
638	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
639	*kernel) # if there is no kernel config file do not build the kernel
640	[[ -z $CONFIG ]] && continue
641	# Copy the config file to /sources with a standardized name
642	cp $CONFIG $BUILDDIR/sources/kernel-config
643	;;
644	esac
645	#
646	# First append each name of the script files to a list (this will become
647	# the names of the targets in the Makefile
648	bootabletools="$bootabletools $this_script"
649	#
650	# Grab the name of the target, strip id number and misc words.
651	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
652	case $this_script in
653	kernel) name=linux
654	;;
655	esac
656
657	pkg_tarball=$(get_package_tarball_name $name)
658
659	#--------------------------------------------------------------------#
660	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
661	#--------------------------------------------------------------------#
662	#
663	# Drop in the name of the target on a new line, and the previous target
664	# as a dependency. Also call the echo_message function.
665	CHROOT_wrt_target "${this_script}" "$PREV"
666	#
667	# If $pkg_tarball isn't empty, we've got a package...
668	# Insert instructions for unpacking the package and changing directories
669	#
670	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
671	#
672	# Select a script execution method
673	case $this_script in
674	fstab) if [[ -n "$FSTAB" ]]; then
675	CHROOT_wrt_CopyFstab
676	else
677	CHROOT_wrt_RunAsRoot "${file}"
678	fi
679	;;
680	*) CHROOT_wrt_RunAsRoot "${file}"
681	;;
682	esac
683	#
684	# Housekeeping...remove any build directory(ies) except if the package build fails.
685	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
686	#
687	# Include a touch of the target name so make can check if it's already been made.
688	wrt_touch
689	#
690	#--------------------------------------------------------------------#
691	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
692	#--------------------------------------------------------------------#
693	#
694	# Keep the script file name for Makefile dependencies.
695	PREV=$this_script
696
697	done
698
699	}
700
701
702	#--------------------------------------#
703	build_Makefile() { # Construct a Makefile from the book scripts
704	#--------------------------------------#
705	#
706	# Script crashes if error trapping is on
707	#
708	set +e
709	declare -f method_cmds
710	set -e
711
712	echo "...Creating Makefile... ${BOLD}START${OFF}"
713
714	cd $JHALFSDIR/${PROGNAME}-commands
715	# Start with a clean files
716	>$MKFILE
717	>$MKFILE.tmp
718
719	method_cmds=${METHOD}_Makefiles
720
721	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
722	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
723	temptools_Makefiles # mk_TEMP (LUSER) $temptools
724	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
725	if [[ ! $TEST = "0" ]]; then
726	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
727	fi
728	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
729	# Add the iterations targets, if needed
730	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
731	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
732	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
733
734	# Add the BLFS_TOOL targets, if needed
735	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
736
737	# Add a header, some variables and include the function file
738	# to the top of the real Makefile.
739	wrt_Makefile_header
740
741	# Add chroot commands
742	if [ "$METHOD" = "chroot" ] ; then
743	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
744	chroot=`cat chroot/chroot \| \
745	sed -e "s@chroot@$CHROOT_LOC@" \
746	-e '/#!\/tools\/bin\/bash/d' \
747	-e '/^export/d' \
748	-e '/^logout/d' \
749	-e 's@ \\\@ @g' \| \
750	tr -d '\n' \| \
751	sed -e 's/ */ /g' \
752	-e 's\|\\$\|&&\|g' \
753	-e 's\|exit\|\|g' \
754	-e 's\|$\| -c\|' \
755	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
756	-e 's\|set -e\|\|' \
757	-e 's\|set +h\|\|'`
758	echo -e "CHROOT1= $chroot\n" >> $MKFILE
759	fi
760
761	################## CHROOT ####################
762
763	if [[ "${METHOD}" = "chroot" ]]; then
764	(
765	cat << EOF
766
767	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_BLFS_TOOL
768	@sudo make do-housekeeping
769	@\$(call echo_finished,$VERSION)
770
771	ck_UID:
772	@if [ \`id -u\` = "0" ]; then \\
773	echo "+--------------------------------------------------+"; \\
774	echo "\|You cannot run this makefile from the root account\|"; \\
775	echo "+--------------------------------------------------+"; \\
776	exit 1; \\
777	fi
778
779	#---------------AS ROOT
780	mk_SETUP:
781	@\$(call echo_SU_request)
782	@sudo make SHELL=/bin/bash SETUP
783	@touch \$@
784
785	#---------------AS LUSER
786	mk_CROSS: mk_SETUP
787	@\$(call echo_PHASE,Cross and Temporary Tools)
788	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
789	@sudo make restore-luser-env
790	@touch \$@
791
792	mk_SUDO: mk_CROSS
793	@sudo make SHELL=/bin/bash SUDO
794	@touch \$@
795	#
796	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
797	# chroot environment. (Unless someone knows a different way)
798	# Manually create the /bin directory and provide link to the /tools dir.
799	# Also change the original symlink creation to include (f)orce to prevent failure due to
800	# pre-existing links.
801
802	#---------------CHROOT JAIL
803	mk_SYSTOOLS: mk_SUDO
804	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
805	mkdir \$(MOUNT_PT)/bin; \\
806	cd \$(MOUNT_PT)/bin && \\
807	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
808	sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
809	fi;
810	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/*-createfiles
811	@\$(call echo_CHROOT_request)
812	@\$(call echo_PHASE, CHROOT JAIL )
813	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
814	@touch \$@
815
816	mk_BLFS_TOOL: create-sbu_du-report
817	@\$(call echo_PHASE,Building BLFS-TOOLS)
818	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
819	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
820	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
821	fi;
822	@touch \$@
823
824	SETUP: $host_prep
825	AS_LUSER: $cross_tools $temptools
826	SUDO: $orphan_scripts
827	CHROOT_JAIL: ${chroottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
828	BLFS_TOOL: $blfs_tool
829
830
831	create-sbu_du-report: mk_SYSTOOLS
832	@\$(call echo_message, Building)
833	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
834	./create-sbu_du-report.sh logs $VERSION; \\
835	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
836	fi;
837	@touch \$@
838
839	do-housekeeping:
840	@-umount \$(MOUNT_PT)/dev/pts
841	@-umount \$(MOUNT_PT)/dev/shm
842	@-umount \$(MOUNT_PT)/dev
843	@-umount \$(MOUNT_PT)/sys
844	@-umount \$(MOUNT_PT)/proc
845	@-rm /tools /cross-tools
846	@-if [ ! -f luser-exist ]; then \\
847	userdel \$(LUSER); \\
848	rm -rf /home/\$(LUSER); \\
849	fi;
850
851	EOF
852	) >> $MKFILE
853
854	fi
855
856	################### BOOT #####################
857
858	if [[ "${METHOD}" = "boot" ]]; then
859	(
860	cat << EOF
861
862	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
863	@sudo make restore-luser-env
864	@sudo make do-housekeeping
865	@\$(call echo_boot_finished,$VERSION)
866
867	makesys: mk_FINAL mk_BLFS_TOOL
868	@\$(call echo_finished,$VERSION)
869
870
871	ck_UID:
872	@if [ \`id -u\` = "0" ]; then \\
873	echo "+--------------------------------------------------+"; \\
874	echo "\|You cannot run this makefile from the root account\|"; \\
875	echo "\|However, if this is the boot environment \|"; \\
876	echo "\| the command you are looking for is \|"; \\
877	echo "\| make makesys \|"; \\
878	echo "\| to finish off the build \|"; \\
879	echo "+--------------------------------------------------+"; \\
880	exit 1; \\
881	fi
882
883	#---------------AS ROOT
884
885	mk_SETUP:
886	@\$(call echo_SU_request)
887	@sudo make SHELL=/bin/bash SETUP
888	@touch \$@
889
890	#---------------AS LUSER
891
892	mk_CROSS: mk_SETUP
893	@\$(call echo_PHASE,Cross Tool)
894	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
895	@touch \$@
896
897	mk_SUDO: mk_CROSS
898	@sudo make SHELL=/bin/bash SUDO
899	@touch \$@
900
901	#---------------AS ROOT
902
903	mk_FINAL:
904	@\$(call echo_PHASE,Final System)
905	@( source /root/.bash_profile && make AS_ROOT )
906	@touch \$@
907
908	mk_BLFS_TOOL: mk_FINAL
909	@\$(call echo_PHASE,Building BLFS-TOOLS)
910	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
911	mkdir -p $TRACKING_DIR; \\
912	( make BLFS_TOOL ); \\
913	fi
914	@touch \$@
915
916	SETUP: $host_prep
917	AS_LUSER: $cross_tools $temptools ${boottools}
918	SUDO: $orphan_scripts
919	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
920	BLFS_TOOL: $blfs_tool
921
922	do-housekeeping:
923	@-rm /tools /cross-tools
924	@-if [ ! -f luser-exist ]; then \\
925	userdel \$(LUSER); \\
926	rm -rf /home/\$(LUSER); \\
927	fi;
928
929	EOF
930	) >> $MKFILE
931	fi
932
933	(
934	cat << EOF
935
936	restore-luser-env:
937	@\$(call echo_message, Building)
938	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
939	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
940	fi;
941	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
942	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
943	fi;
944	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
945	touch \$@ && \\
946	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
947	echo --------------------------------------------------------------------------------\$(WHITE)
948
949	########################################################
950
951
952	EOF
953	) >> $MKFILE
954
955	# Bring over the items from the Makefile.tmp
956	cat $MKFILE.tmp >> $MKFILE
957	rm $MKFILE.tmp
958
959	echo "Creating Makefile... ${BOLD}DONE${OFF}"
960	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: