Context Navigation

source: CLFS/master.sh@ c93f2b0

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since c93f2b0 was f546320, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago
Ported INSTALL_LOG support to all books.
Property mode set to `100644`
File size: 34.6 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@mkdir \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
38	else \\
39	touch luser-exist; \\
40	fi;
41	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
42	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
43	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
44	chmod a+wt \$(SRCSDIR)
45	@\$(call housekeeping)
46
47	026-settingenvironment: 025-addinguser
48	@\$(call echo_message, Building)
49	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
50	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
51	fi;
52	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
53	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
54	fi;
55	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
56	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
57	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
58	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
67	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
68	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
69	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
70	touch envars && \\
71	chmod -R a+wt \$(MOUNT_PT) && \\
72	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT)
73	@\$(call housekeeping)
74	EOF
75	) >> $MKFILE.tmp
76	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
77
78	}
79
80	#--------------------------------------#
81	cross_tools_Makefiles() { #
82	#--------------------------------------#
83	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
84
85	for file in cross-tools/* ; do
86	# Keep the script file name
87	this_script=`basename $file`
88	#
89	# Skip this script...
90	case $this_script in
91	cflags \| variables ) # work done in host_prep_Makefiles
92	continue; ;;
93	*) ;;
94	esac
95	#
96	# Set the dependency for the first target.
97	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
98
99	# First append each name of the script files to a list (this will become
100	# the names of the targets in the Makefile
101	cross_tools="$cross_tools $this_script"
102
103	# Grab the name of the target (minus the -headers or -cross in the case of gcc
104	# and binutils in chapter 5)
105	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
106	-e 's@-static@@' \
107	-e 's@-final@@' \
108	-e 's@-64@@' \
109	-e 's@-n32@@'`
110	pkg_tarball=$(get_package_tarball_name $name)
111
112	#--------------------------------------------------------------------#
113	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
114	#--------------------------------------------------------------------#
115	#
116	# Drop in the name of the target on a new line, and the previous target
117	# as a dependency. Also call the echo_message function.
118	LUSER_wrt_target "${this_script}" "$PREV"
119	#
120	# If $pkg_tarball isn't empty, we've got a package...
121	#
122	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
123	#
124	LUSER_wrt_RunAsUser "${file}"
125	#
126	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
127	#
128	# Include a touch of the target name so make can check if it's already been made.
129	wrt_touch
130	#
131	#--------------------------------------------------------------------#
132	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
133	#--------------------------------------------------------------------#
134	#
135	# Keep the script file name for Makefile dependencies.
136	PREV=$this_script
137
138	done # for file in ....
139	}
140
141	#--------------------------------------#
142	temptools_Makefiles() { #
143	#--------------------------------------#
144	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
145
146	for file in temp-system/* ; do
147	# Keep the script file name
148	this_script=`basename $file`
149	#
150	# Deal with any odd scripts..
151	case $this_script in
152	*choose) # The choose script will fail if you cannot enter the new environment
153	# If the 'boot' build method was chosen don't run the script
154	[[ $METHOD = "boot" ]] && continue; ;;
155	*) ;;
156	esac
157
158	#
159	# First append each name of the script files to a list (this will become
160	# the names of the targets in the Makefile
161	temptools="$temptools $this_script"
162
163	#
164	# Grab the name of the target, strip id number, XXX-script
165	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
166	#
167	pkg_tarball=$(get_package_tarball_name $name)
168
169	#--------------------------------------------------------------------#
170	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
171	#--------------------------------------------------------------------#
172	#
173	# Drop in the name of the target on a new line, and the previous target
174	# as a dependency. Also call the echo_message function.
175	LUSER_wrt_target "${this_script}" "$PREV"
176	#
177	# If $pkg_tarball isn't empty, we've got a package...
178	# Insert instructions for unpacking the package and to set the PKGDIR variable.
179	#
180	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
181	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
182	#
183	LUSER_wrt_RunAsUser "${file}"
184	#
185	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
186	#
187	# Include a touch of the target name so make can check if it's already been made.
188	wrt_touch
189	#
190	#--------------------------------------------------------------------#
191	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
192	#--------------------------------------------------------------------#
193	#
194	# Keep the script file name for Makefile dependencies.
195	PREV=$this_script
196	done # for file in ....
197	}
198
199
200	#--------------------------------------#
201	chroot_Makefiles() { #
202	#--------------------------------------#
203	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
204
205	for file in chroot/* ; do
206	# Keep the script file name
207	this_script=`basename $file`
208	#
209	# Skipping scripts is done now and not included in the build tree.
210	case $this_script in
211	chroot) continue ;;
212	esac
213
214	#
215	# First append each name of the script files to a list (this will become
216	# the names of the targets in the Makefile
217	case "${this_script}" in
218	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
219	*) chroottools="$chroottools $this_script" ;;
220	esac
221
222	# Grab the name of the target, strip id number, XXX-script
223	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
224
225	pkg_tarball=$(get_package_tarball_name $name)
226
227	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
228	# .. Customized makefile entry
229	case "${this_script}" in
230	*util-linux)
231	LUSER_wrt_target "${this_script}" "$PREV"
232	LUSER_wrt_unpack "$pkg_tarball"
233	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
234	LUSER_wrt_RunAsUser "${file}"
235	LUSER_RemoveBuildDirs "${name}"
236	wrt_touch
237	temptools="$temptools $this_script"
238	continue ;;
239	esac
240
241
242	#--------------------------------------------------------------------#
243	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
244	#--------------------------------------------------------------------#
245	#
246	# Drop in the name of the target on a new line, and the previous target
247	# as a dependency. Also call the echo_message function.
248	CHROOT_wrt_target "${this_script}" "$PREV"
249	#
250	# If $pkg_tarball isn't empty, we've got a package...
251	# Insert instructions for unpacking the package and changing directories
252	#
253	if [ "$pkg_tarball" != "" ] ; then
254	CHROOT_Unpack "$pkg_tarball"
255	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
256	fi
257	#
258	# Select a script execution method
259	case $this_script in
260	*kernfs) wrt_RunAsRoot "${file}" ;;
261	*) CHROOT_wrt_RunAsRoot "${file}" ;;
262	esac
263	#
264	# Housekeeping...remove the build directory(ies), except if the package build fails.
265	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
266	#
267	# Include a touch of the target name so make can check if it's already been made.
268	wrt_touch
269	#
270	#--------------------------------------------------------------------#
271	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
272	#--------------------------------------------------------------------#
273	#
274	# Keep the script file name for Makefile dependencies.
275	PREV=$this_script
276
277	done # for file in...
278	}
279
280
281	#--------------------------------------#
282	boot_Makefiles() { #
283	#--------------------------------------#
284
285	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
286	#
287	# Create a target bootable partition containing a compile environment. Later
288	# on we boot into this environment and contine the build.
289	#
290	for file in boot/* ; do
291	# Keep the script file name
292	this_script=`basename $file`
293
294	# A little housekeeping on the scripts
295	case $this_script in
296	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
297	whatnext) continue ;;
298	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
299	*kernel) # if there is no kernel config file do not build the kernel
300	[[ -z $CONFIG ]] && continue
301	# Copy the config file to /sources with a standardized name
302	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
303	;;
304	esac
305	#
306	# First append each name of the script files to a list (this will become
307	# the names of the targets in the Makefile
308	case "${this_script}" in
309	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
310	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
311	*) boottools="$boottools $this_script" ;;
312	esac
313	#
314	# Grab the name of the target, strip id number and misc words.
315	case $this_script in
316	*kernel) name=linux ;;
317	*bootscripts) name="bootscripts-cross-lfs" ;;
318	*udev-rules) name="udev-cross-lfs" ;;
319	*grub-build) name=grub ;;
320	*-aboot-build) name=aboot ;;
321	*yaboot-build) name=yaboot ;;
322	*colo-build) name=colo ;;
323	*silo-build) name=silo ;;
324	*arcload-build) name=arcload ;;
325	*lilo-build) name=lilo ;;
326	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
327	esac
328	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
329	pkg_tarball=$(get_package_tarball_name $name)
330
331	#--------------------------------------------------------------------#
332	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
333	#--------------------------------------------------------------------#
334	#
335	# Drop in the name of the target on a new line, and the previous target
336	# as a dependency. Also call the echo_message function.
337	LUSER_wrt_target "${this_script}" "$PREV"
338	#
339	# If $pkg_tarball isn't empty, we've got a package...
340	# Insert instructions for unpacking the package and changing directories
341	#
342	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
343	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
344	#
345	# Select a script execution method
346	case $this_script in
347	# The following 2 scripts are defined in the /boot directory but need
348	# to be run as a root user. Set them up here but run them in another phase
349	changingowner) wrt_RunAsRoot "${file}" ;;
350	devices) wrt_RunAsRoot "${file}" ;;
351	fstab) if [[ -n "$FSTAB" ]]; then
352	LUSER_wrt_CopyFstab
353	else
354	LUSER_wrt_RunAsUser "${file}"
355	fi
356	;;
357	*) LUSER_wrt_RunAsUser "${file}" ;;
358	esac
359	#
360	# Housekeeping...remove any build directory(ies) except if the package build fails.
361	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
362	#
363	# Include a touch of the target name so make can check if it's already been made.
364	wrt_touch
365	#
366	#--------------------------------------------------------------------#
367	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
368	#--------------------------------------------------------------------#
369	#
370	# Keep the script file name for Makefile dependencies.
371	PREV=$this_script
372
373	done
374	}
375
376
377	#--------------------------------------#
378	testsuite_tools_Makefiles() { #
379	#--------------------------------------#
380
381	if [[ "${METHOD}" = "chroot" ]]; then
382	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
383	else
384	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
385	PREV=""
386	fi
387
388	for file in testsuite-tools/* ; do
389	# Keep the script file name
390	this_script=`basename $file`
391
392	# First append each name of the script files to a list (this will become
393	# the names of the targets in the Makefile
394	testsuitetools="$testsuitetools $this_script"
395
396	# Grab the name of the target, strip id number, XXX-script
397	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
398	-e 's@-64bit@@' \
399	-e 's@-64@@' \
400	-e 's@64@@' \
401	-e 's@n32@@'`
402
403	pkg_tarball=$(get_package_tarball_name $name)
404
405	#--------------------------------------------------------------------#
406	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
407	#--------------------------------------------------------------------#
408	#
409	# Drop in the name of the target on a new line, and the previous target
410	# as a dependency. Also call the echo_message function.
411	CHROOT_wrt_target "${this_script}" "$PREV"
412	#
413	CHROOT_Unpack "$pkg_tarball"
414	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
415	#
416	CHROOT_wrt_RunAsRoot "${file}"
417	#
418	CHROOT_wrt_RemoveBuildDirs "${name}"
419	#
420	# Include a touch of the target name so make can check if it's already been made.
421	wrt_touch
422	#
423	#--------------------------------------------------------------------#
424	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
425	#--------------------------------------------------------------------#
426	#
427	# Keep the script file name for Makefile dependencies.
428	PREV=$this_script
429
430	done
431	}
432
433
434	#--------------------------------------#
435	final_system_Makefiles() { #
436	#--------------------------------------#
437	# Set envars and scripts for iteration targets
438	if [[ -z "$1" ]] ; then
439	local N=""
440	# In boot method the makesys phase was initiated in testsuite_tools_makefile
441	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
442	else
443	local N=-build_$1
444	local basicsystem=""
445	mkdir final-system$N
446	cp final-system/* final-system$N
447	for script in final-system$N/* ; do
448	# Overwrite existing symlinks, files, and dirs
449	sed -e 's/ln -sv/&f/g' \
450	-e 's/mv -v/&f/g' \
451	-e 's/mkdir -v/&p/g' -i ${script}
452	# Rename the scripts
453	mv ${script} ${script}$N
454	done
455	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
456	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
457	# Delete *old Readline libraries just after make install
458	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
459	fi
460
461	if [[ "${METHOD}" = "chroot" ]]; then
462	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
463	else
464	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
465	fi
466
467	for file in final-system$N/* ; do
468	# Keep the script file name
469	this_script=`basename $file`
470
471	# Test if the stripping phase must be skipped.
472	# Skip alsp temp-perl for iterative runs
473	case $this_script in
474	stripping) [[ "$STRIP" = "n" ]] && continue ;;
475	temp-perl) [[ -n "$N" ]] && continue ;;
476	esac
477
478	# Grab the name of the target, strip id number, XXX-script
479	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
480	-e 's@temp-@@' \
481	-e 's@-64bit@@' \
482	-e 's@-64@@' \
483	-e 's@64@@' \
484	-e 's@n32@@' \
485	-e 's,'$N',,'`
486
487	# Find the version of the command files, if it corresponds with the building of
488	# a specific package. We need this here to can skip scripts not needed for
489	# iterations rebuilds
490	pkg_tarball=$(get_package_tarball_name $name)
491
492	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
493	case "${this_script}" in
494	stripping) ;;
495	*) continue ;;
496	esac
497	fi
498
499	# Append each name of the script files to a list (this will become
500	# the names of the targets in the Makefile
501	basicsystem="$basicsystem ${this_script}"
502
503	#--------------------------------------------------------------------#
504	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
505	#--------------------------------------------------------------------#
506	#
507	# Drop in the name of the target on a new line, and the previous target
508	# as a dependency. Also call the echo_message function.
509	CHROOT_wrt_target "${this_script}" "$PREV"
510
511	# If $pkg_tarball isn't empty, we've got a package...
512	if [ "$pkg_tarball" != "" ] ; then
513	# Touch timestamp file if installed files logs will be created.
514	# But only for the firt build when running iterative builds.
515	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
516	CHROOT_wrt_TouchTimestamp
517	fi
518	CHROOT_Unpack "$pkg_tarball"
519	# If the testsuites must be run, initialize the log file
520	case $name in
521	binutils \| gcc \| glibc )
522	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
523	;;
524	* )
525	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
526	;;
527	esac
528	# If using optimizations, write the instructions
529	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
530	fi
531	#
532	CHROOT_wrt_RunAsRoot "${file}"
533	#
534	# Write installed files log and remove the build directory(ies)
535	# except if the package build fails.
536	if [ "$pkg_tarball" != "" ] ; then
537	CHROOT_wrt_RemoveBuildDirs "$name"
538	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
539	CHROOT_wrt_LogNewFiles "$name"
540	fi
541	fi
542	#
543	# Include a touch of the target name so make can check
544	# if it's already been made.
545	wrt_touch
546	#
547	#--------------------------------------------------------------------#
548	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
549	#--------------------------------------------------------------------#
550	#
551	# Keep the script file name for Makefile dependencies.
552	PREV=${this_script}
553	# Set system_build envar for iteration targets
554	system_build=$basicsystem
555	done # for file in final-system/* ...
556	}
557
558	#--------------------------------------#
559	bootscripts_Makefiles() { #
560	#--------------------------------------#
561
562	if [[ "${METHOD}" = "chroot" ]]; then
563	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
564	else
565	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
566	fi
567
568	for file in bootscripts/* ; do
569	# Keep the script file name
570	this_script=`basename $file`
571
572	case $this_script in
573	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
574	console) continue ;; # Use the files that came with the bootscripts
575	*) ;;
576	esac
577
578	# First append each name of the script files to a list (this will become
579	# the names of the targets in the Makefile
580	bootscripttools="$bootscripttools $this_script"
581
582	# Grab the name of the target, strip id number, XXX-script
583	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
584	-e 's@-64bit@@' \
585	-e 's@-64@@' \
586	-e 's@64@@' \
587	-e 's@n32@@'`
588	case $name in
589	bootscripts) name=bootscripts-cross-lfs ;;
590	*udev-rules) name=udev-cross-lfs ;;
591	esac
592
593	pkg_tarball=$(get_package_tarball_name $name)
594
595	#--------------------------------------------------------------------#
596	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
597	#--------------------------------------------------------------------#
598	#
599	# Drop in the name of the target on a new line, and the previous target
600	# as a dependency. Also call the echo_message function.
601	CHROOT_wrt_target "${this_script}" "$PREV"
602	#
603	# If $pkg_tarball isn't empty, we've got a package...
604	#
605	if [ "$pkg_tarball" != "" ] ; then
606	if [ "${INSTALL_LOG}" = "y" ] ; then
607	CHROOT_wrt_LogNewFiles "$name"
608	fi
609	CHROOT_Unpack "$pkg_tarball"
610	fi
611	#
612	CHROOT_wrt_RunAsRoot "${file}"
613	#
614	# Write installed files log and remove the build directory(ies)
615	# except if the package build fails.
616	if [ "$pkg_tarball" != "" ] ; then
617	CHROOT_wrt_RemoveBuildDirs "$name"
618	if [ "${INSTALL_LOG}" = "y" ] ; then
619	CHROOT_wrt_LogNewFiles "$name"
620	fi
621	fi
622	#
623	# Include a touch of the target name so make can check if it's already been made.
624	wrt_touch
625	#
626	#--------------------------------------------------------------------#
627	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
628	#--------------------------------------------------------------------#
629	#
630	# Keep the script file name for Makefile dependencies.
631	PREV=$this_script
632
633	done # for file in bootscripts/* ...
634	}
635
636	#--------------------------------------#
637	bootable_Makefiles() { #
638	#--------------------------------------#
639
640	if [[ "${METHOD}" = "chroot" ]]; then
641	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
642	else
643	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
644	fi
645
646
647	for file in bootable/* ; do
648	# Keep the script file name
649	this_script=`basename $file`
650
651	# A little housekeeping on the scripts
652	case $this_script in
653	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
654	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
655	*kernel) # if there is no kernel config file do not build the kernel
656	[[ -z $CONFIG ]] && continue
657	# Copy the config file to /sources with a standardized name
658	cp $CONFIG $BUILDDIR/sources/kernel-config
659	;;
660	esac
661	#
662	# First append each name of the script files to a list (this will become
663	# the names of the targets in the Makefile
664	bootabletools="$bootabletools $this_script"
665	#
666	# Grab the name of the target, strip id number and misc words.
667	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
668	case $this_script in
669	kernel) name=linux
670	;;
671	esac
672
673	pkg_tarball=$(get_package_tarball_name $name)
674
675	#--------------------------------------------------------------------#
676	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
677	#--------------------------------------------------------------------#
678	#
679	# Drop in the name of the target on a new line, and the previous target
680	# as a dependency. Also call the echo_message function.
681	CHROOT_wrt_target "${this_script}" "$PREV"
682	#
683	# If $pkg_tarball isn't empty, we've got a package...
684	# Insert instructions for unpacking the package and changing directories
685	#
686	if [ "$pkg_tarball" != "" ] ; then
687	if [ "${INSTALL_LOG}" = "y" ] ; then
688	CHROOT_wrt_LogNewFiles "$name"
689	fi
690	CHROOT_Unpack "$pkg_tarball"
691	fi
692	#
693	# Select a script execution method
694	case $this_script in
695	fstab) if [[ -n "$FSTAB" ]]; then
696	CHROOT_wrt_CopyFstab
697	else
698	CHROOT_wrt_RunAsRoot "${file}"
699	fi
700	;;
701	*) CHROOT_wrt_RunAsRoot "${file}"
702	;;
703	esac
704	#
705	# Write installed files log and remove the build directory(ies)
706	# except if the package build fails.
707	if [ "$pkg_tarball" != "" ] ; then
708	CHROOT_wrt_RemoveBuildDirs "$name"
709	if [ "${INSTALL_LOG}" = "y" ] ; then
710	CHROOT_wrt_LogNewFiles "$name"
711	fi
712	fi
713	#
714	# Include a touch of the target name so make can check if it's already been made.
715	wrt_touch
716	#
717	#--------------------------------------------------------------------#
718	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
719	#--------------------------------------------------------------------#
720	#
721	# Keep the script file name for Makefile dependencies.
722	PREV=$this_script
723
724	done
725
726	}
727
728
729	#--------------------------------------#
730	build_Makefile() { # Construct a Makefile from the book scripts
731	#--------------------------------------#
732	#
733	# Script crashes if error trapping is on
734	#
735	set +e
736	declare -f method_cmds
737	set -e
738
739	echo "...Creating Makefile... ${BOLD}START${OFF}"
740
741	cd $JHALFSDIR/${PROGNAME}-commands
742	# Start with a clean files
743	>$MKFILE
744	>$MKFILE.tmp
745
746	method_cmds=${METHOD}_Makefiles
747
748	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
749	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
750	temptools_Makefiles # mk_TEMP (LUSER) $temptools
751	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
752	if [[ ! $TEST = "0" ]]; then
753	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
754	fi
755	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
756	# Add the iterations targets, if needed
757	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
758	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
759	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
760
761	# Add the CUSTOM_TOOLS targets, if needed
762	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
763	# Add the BLFS_TOOL targets, if needed
764	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
765
766	# Add a header, some variables and include the function file
767	# to the top of the real Makefile.
768	wrt_Makefile_header
769
770	# Add chroot commands
771	if [ "$METHOD" = "chroot" ] ; then
772	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
773	chroot=`cat chroot/chroot \| \
774	sed -e "s@chroot@$CHROOT_LOC@" \
775	-e '/#!\/bin\/bash/d' \
776	-e '/^export/d' \
777	-e '/^logout/d' \
778	-e 's@ \\\@ @g' \| \
779	tr -d '\n' \| \
780	sed -e 's/ */ /g' \
781	-e 's\|\\$\|&&\|g' \
782	-e 's\|exit\|\|g' \
783	-e 's\|$\| -c\|' \
784	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
785	-e 's\|set -e\|\|' \
786	-e 's\|set +h\|\|'`
787	echo -e "CHROOT1= $chroot\n" >> $MKFILE
788	fi
789
790	################## CHROOT ####################
791
792	if [[ "${METHOD}" = "chroot" ]]; then
793	(
794	cat << EOF
795
796	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
797	@sudo make do-housekeeping
798	@echo "$VERSION - jhalfs build" > clfs-release && \\
799	sudo mv clfs-release \$(MOUNT_PT)/etc
800	@\$(call echo_finished,$VERSION)
801
802	ck_UID:
803	@if [ \`id -u\` = "0" ]; then \\
804	echo "+--------------------------------------------------+"; \\
805	echo "\|You cannot run this makefile from the root account\|"; \\
806	echo "+--------------------------------------------------+"; \\
807	exit 1; \\
808	fi
809
810	#---------------AS ROOT
811	mk_SETUP:
812	@\$(call echo_SU_request)
813	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
814	@touch \$@
815
816	#---------------AS LUSER
817	mk_CROSS: mk_SETUP
818	@\$(call echo_PHASE,Cross and Temporary Tools)
819	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
820	@sudo make restore-luser-env
821	@touch \$@
822
823	mk_SUDO: mk_CROSS
824	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
825	@touch \$@
826
827	#---------------CHROOT JAIL
828	mk_SYSTOOLS: mk_SUDO
829	@\$(call echo_CHROOT_request)
830	@\$(call echo_PHASE, CHROOT JAIL )
831	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
832	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
833	@touch \$@
834
835	mk_CUSTOM_TOOLS: create-sbu_du-report
836	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
837	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
838	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
839	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
840	fi;
841	@touch \$@
842
843	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
844	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
845	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
846	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
847	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"; \\
848	fi;
849	@touch \$@
850
851	SETUP: $host_prep
852	AS_LUSER: $cross_tools $temptools
853	SUDO: $orphan_scripts
854	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
855	PREP_CHROOT_JAIL: ${chroottools}
856	CHROOT_JAIL: SHELL=/tools/bin/bash
857	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
858	CUSTOM_TOOLS: $custom_list
859	BLFS_TOOL: $blfs_tool
860
861
862	create-sbu_du-report: mk_SYSTOOLS
863	@\$(call echo_message, Building)
864	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
865	./create-sbu_du-report.sh logs $VERSION; \\
866	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
867	fi;
868	@touch \$@
869
870	do-housekeeping:
871	@-umount \$(MOUNT_PT)/dev/pts
872	@-umount \$(MOUNT_PT)/dev/shm
873	@-umount \$(MOUNT_PT)/dev
874	@-umount \$(MOUNT_PT)/sys
875	@-umount \$(MOUNT_PT)/proc
876	@-rm /tools /cross-tools
877	@-if [ ! -f luser-exist ]; then \\
878	userdel \$(LUSER); \\
879	rm -rf \$(LUSER_HOME); \\
880	fi;
881
882	EOF
883	) >> $MKFILE
884
885	fi
886
887	################### BOOT #####################
888
889	if [[ "${METHOD}" = "boot" ]]; then
890	(
891	cat << EOF
892
893	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
894	@sudo make restore-luser-env
895	@sudo make do-housekeeping
896	@\$(call echo_boot_finished,$VERSION)
897
898	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
899	@echo "$VERSION - jhalfs build" > /etc/clfs-release
900	@\$(call echo_finished,$VERSION)
901
902
903	ck_UID:
904	@if [ \`id -u\` = "0" ]; then \\
905	echo "+--------------------------------------------------+"; \\
906	echo "\|You cannot run this makefile from the root account\|"; \\
907	echo "\|However, if this is the boot environment \|"; \\
908	echo "\| the command you are looking for is \|"; \\
909	echo "\| make makesys \|"; \\
910	echo "\| to finish off the build \|"; \\
911	echo "+--------------------------------------------------+"; \\
912	exit 1; \\
913	fi
914
915	#---------------AS ROOT
916
917	mk_SETUP:
918	@\$(call echo_SU_request)
919	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
920	@touch \$@
921
922	#---------------AS LUSER
923
924	mk_CROSS: mk_SETUP
925	@\$(call echo_PHASE,Cross Tool)
926	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
927	@touch \$@
928
929	mk_SUDO: mk_CROSS
930	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
931	@touch \$@
932
933	#---------------AS ROOT
934
935	mk_FINAL:
936	@\$(call echo_PHASE,Final System)
937	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
938	@touch \$@
939
940	mk_CUSTOM_TOOLS: mk_FINAL
941	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
942	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
943	mkdir -p ${TRACKING_DIR}; \\
944	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
945	fi;
946	@touch \$@
947
948	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
949	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
950	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
951	mkdir -p $TRACKING_DIR; \\
952	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL ); \\
953	fi
954	@touch \$@
955
956	SETUP: $host_prep
957	AS_LUSER: $cross_tools $temptools ${boottools}
958	SUDO: $orphan_scripts
959	AS_ROOT: SHELL=/tools/bin/bash
960	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
961	CUSTOM_TOOLS: $custom_list
962	BLFS_TOOL: $blfs_tool
963
964	do-housekeeping:
965	@-rm /tools /cross-tools
966	@-if [ ! -f luser-exist ]; then \\
967	userdel \$(LUSER); \\
968	rm -rf \$(LUSER_HOME); \\
969	fi;
970
971	EOF
972	) >> $MKFILE
973	fi
974
975	(
976	cat << EOF
977
978	restore-luser-env:
979	@\$(call echo_message, Building)
980	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
981	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
982	fi;
983	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
984	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
985	fi;
986	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
987	touch \$@ && \\
988	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
989	echo --------------------------------------------------------------------------------\$(WHITE)
990
991	########################################################
992
993
994	EOF
995	) >> $MKFILE
996
997	# Bring over the items from the Makefile.tmp
998	cat $MKFILE.tmp >> $MKFILE
999	rm $MKFILE.tmp
1000
1001	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1002	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: