Context Navigation

source: CLFS/master.sh@ 1ba5024

experimental

Last change on this file since 1ba5024 was 1ba5024, checked in by George Boudreau <georgeb@…>, 18 years ago
Remove unnecessary flow tests. Added missing function, wrt_report. Added restore-luser-env to chroot build
Property mode set to `100755`
File size: 46.6 KB

Line
1	#!/bin/sh
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7	###################################
8	### FUNCTIONS ###
9	###################################
10
11	#--------------------------------------#
12	BOOT_wrt_target() { # "${this_script}" "$PREV"
13	#--------------------------------------#
14	local i=$1
15	local PREV=$2
16	case $i in
17	iteration* ) local LOGFILE=$this_script.log ;;
18	* ) local LOGFILE=$this_script ;;
19	esac
20	(
21	cat << EOF
22
23	$i: $PREV
24	@\$(call echo_message, Building)
25	@./progress_bar.sh \$@ \$\$PPID &
26	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude=${SCRIPT_ROOT}\`\n" >logs/$LOGFILE
27	EOF
28	) >> $MKFILE.tmp
29	}
30
31	#--------------------------------------#
32	BOOT_wrt_Unpack() { # "$pkg_tarball"
33	#--------------------------------------#
34	local FILE=$1
35	local optSAVE_PREVIOUS=$2
36
37	if [ "${optSAVE_PREVIOUS}" != "1" ]; then
38	(
39	cat << EOF
40	@\$(call remove_existing_dirs2,$FILE)
41	EOF
42	) >> $MKFILE.tmp
43	fi
44	(
45	cat << EOF
46	@\$(call unpack3,$FILE)
47	@\$(call get_pkg_root2)
48	EOF
49	) >> $MKFILE.tmp
50	}
51
52	#----------------------------------#
53	BOOT_wrt_RunAsRoot() { # "${this_script}" "${file}"
54	#----------------------------------#
55	local this_script=$1
56	local file=$2
57	(
58	cat << EOF
59	@( time { source envars && ${PROGNAME}-commands/`dirname $file`/\$@ >>logs/\$@ 2>&1 ; } ) 2>>logs/\$@ && \\
60	echo -e "\nKB: \`du -skx --exclude=${SCRIPT_ROOT} \`\n" >>logs/\$@
61	EOF
62	) >> $MKFILE.tmp
63	}
64
65	#--------------------------------------#
66	BOOT_wrt_RemoveBuildDirs() { # "${name}"
67	#--------------------------------------#
68	local name=$1
69	(
70	cat << EOF
71	@\$(call remove_build_dirs2,$name)
72	EOF
73	) >> $MKFILE.tmp
74	}
75
76	#----------------------------------#
77	BOOT_wrt_test_log() { #
78	#----------------------------------#
79	local TESTLOGFILE=$1
80	(
81	cat << EOF
82	@echo "export TEST_LOG=/\$(SCRIPT_ROOT)/test-logs/$TESTLOGFILE" >> envars && \\
83	echo -e "\n\`date\`\n" >test-logs/$TESTLOGFILE
84	EOF
85	) >> $MKFILE.tmp
86	}
87
88	#----------------------------------#
89	BOOT_wrt_CopyFstab() { #
90	#----------------------------------#
91	(
92	cat << EOF
93	@( time { cp -v /sources/fstab /etc/fstab >>logs/${this_script} 2>&1 ; } ) 2>>logs/${this_script}
94	EOF
95	) >> $MKFILE.tmp
96	}
97
98
99	########################################
100
101
102	#--------------------------------------#
103	host_prep_Makefiles() { #
104	#--------------------------------------#
105	local CLFS_HOST
106
107	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
108
109	# defined here, only for ease of reading
110	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
111	(
112	cat << EOF
113	023-creatingtoolsdir:
114	@\$(call echo_message, Building)
115	@mkdir \$(MOUNT_PT)/tools && \\
116	rm -f /tools && \\
117	ln -s \$(MOUNT_PT)/tools /
118	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
119	mkdir \$(MOUNT_PT)/sources; \\
120	fi;
121	@chmod a+wt \$(MOUNT_PT)/sources && \\
122	touch \$@ && \\
123	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
124	echo --------------------------------------------------------------------------------\$(WHITE)
125
126	024-creatingcrossdir: 023-creatingtoolsdir
127	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
128	rm -f /cross-tools && \\
129	ln -s \$(MOUNT_PT)/cross-tools /
130	@touch \$@ && \\
131	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
132	echo --------------------------------------------------------------------------------\$(WHITE)
133
134	025-addinguser: 024-creatingcrossdir
135	@\$(call echo_message, Building)
136	@if [ ! -d /home/\$(LUSER) ]; then \\
137	groupadd \$(LGROUP); \\
138	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
139	else \\
140	touch luser-exist; \\
141	fi;
142	@chown \$(LUSER) \$(MOUNT_PT) && \\
143	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
144	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
145	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
146	touch \$@ && \\
147	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
148	echo --------------------------------------------------------------------------------\$(WHITE)
149
150	026-settingenvironment: 025-addinguser
151	@\$(call echo_message, Building)
152	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
153	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
154	fi;
155	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
156	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
157	fi;
158	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
159	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
160	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
161	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
162	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
163	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
164	echo "" >> /home/\$(LUSER)/.bashrc && \\
165	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
166	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
167	echo "" >> /home/\$(LUSER)/.bashrc && \\
168	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
169	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
170	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
171	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
172	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
173	touch envars && \\
174	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
175	touch \$@ && \\
176	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
177	echo --------------------------------------------------------------------------------\$(WHITE)
178	EOF
179	) >> $MKFILE.tmp
180	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
181
182	}
183
184	#--------------------------------------#
185	cross_tools_Makefiles() { #
186	#--------------------------------------#
187	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
188
189	for file in cross-tools/* ; do
190	# Keep the script file name
191	this_script=`basename $file`
192	#
193	# Skip this script...
194	case $this_script in
195	cflags \| variables ) # work done in host_prep_Makefiles
196	continue; ;;
197	*) ;;
198	esac
199	#
200	# Set the dependency for the first target.
201	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
202
203	# First append each name of the script files to a list (this will become
204	# the names of the targets in the Makefile
205	cross_tools="$cross_tools $this_script"
206
207	# Grab the name of the target (minus the -headers or -cross in the case of gcc
208	# and binutils in chapter 5)
209	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
210	-e 's@-static@@' \
211	-e 's@-final@@' \
212	-e 's@-64@@' \
213	-e 's@-n32@@'`
214	pkg_tarball=$(get_package_tarball_name $name)
215
216	#--------------------------------------------------------------------#
217	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
218	#--------------------------------------------------------------------#
219	#
220	# Drop in the name of the target on a new line, and the previous target
221	# as a dependency. Also call the echo_message function.
222	LUSER_wrt_target "${this_script}" "$PREV"
223	#
224	# If $pkg_tarball isn't empty, we've got a package...
225	#
226	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
227	#
228	LUSER_wrt_RunAsUser "${file}"
229	#
230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
231	#
232	# Include a touch of the target name so make can check if it's already been made.
233	wrt_touch
234	#
235	#--------------------------------------------------------------------#
236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
237	#--------------------------------------------------------------------#
238	#
239	# Keep the script file name for Makefile dependencies.
240	PREV=$this_script
241
242	done # for file in ....
243	}
244
245	#--------------------------------------#
246	temptools_Makefiles() { #
247	#--------------------------------------#
248	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
249
250	for file in temp-system/* ; do
251	# Keep the script file name
252	this_script=`basename $file`
253	#
254	# Deal with any odd scripts..
255	case $this_script in
256	*choose) # The choose script will fail if you cannot enter the new environment
257	# If the 'boot' build method was chosen don't run the script
258	[[ $METHOD = "boot" ]] && continue; ;;
259	*) ;;
260	esac
261
262	#
263	# First append each name of the script files to a list (this will become
264	# the names of the targets in the Makefile
265	temptools="$temptools $this_script"
266
267	#
268	# Grab the name of the target, strip id number, XXX-script
269	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
270	#
271	pkg_tarball=$(get_package_tarball_name $name)
272
273	#--------------------------------------------------------------------#
274	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
275	#--------------------------------------------------------------------#
276	#
277	# Drop in the name of the target on a new line, and the previous target
278	# as a dependency. Also call the echo_message function.
279	LUSER_wrt_target "${this_script}" "$PREV"
280	#
281	# If $pkg_tarball isn't empty, we've got a package...
282	# Insert instructions for unpacking the package and to set the PKGDIR variable.
283	#
284	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
285	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
286	#
287	LUSER_wrt_RunAsUser "${file}"
288	#
289	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
290	#
291	# Include a touch of the target name so make can check if it's already been made.
292	wrt_touch
293	#
294	#--------------------------------------------------------------------#
295	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
296	#--------------------------------------------------------------------#
297	#
298	# Keep the script file name for Makefile dependencies.
299	PREV=$this_script
300	done # for file in ....
301	}
302
303
304	#--------------------------------------#
305	chroot_Makefiles() { #
306	#--------------------------------------#
307	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
308
309	for file in chroot/* ; do
310	# Keep the script file name
311	this_script=`basename $file`
312	#
313	# Skipping scripts is done now and not included in the build tree.
314	case $this_script in
315	chroot) continue ;;
316	esac
317
318	#
319	# First append each name of the script files to a list (this will become
320	# the names of the targets in the Makefile
321	case "${this_script}" in
322	*util-linux) : ;;
323	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
324	*) chroottools="$chroottools $this_script" ;;
325	esac
326
327	# Grab the name of the target, strip id number, XXX-script
328	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
329
330	pkg_tarball=$(get_package_tarball_name $name)
331
332	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
333	# .. Customized makefile entry
334	case "${this_script}" in
335	*util-linux)
336	LUSER_wrt_target "${this_script}" "$PREV"
337	LUSER_wrt_unpack "$pkg_tarball"
338	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
339	LUSER_wrt_RunAsUser "${file}"
340	LUSER_RemoveBuildDirs "${name}"
341	wrt_touch
342	temptools="$temptools $this_script"
343	continue ;;
344	esac
345
346
347	#--------------------------------------------------------------------#
348	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
349	#--------------------------------------------------------------------#
350	#
351	# Drop in the name of the target on a new line, and the previous target
352	# as a dependency. Also call the echo_message function.
353	CHROOT_wrt_target "${this_script}" "$PREV"
354	#
355	# If $pkg_tarball isn't empty, we've got a package...
356	# Insert instructions for unpacking the package and changing directories
357	#
358	if [ "$pkg_tarball" != "" ] ; then
359	case $this_script in
360	*util-linux) ROOT_Unpack "$pkg_tarball" ;;
361	*) CHROOT_Unpack "$pkg_tarball" ;;
362	esac
363	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
364	fi
365	#
366	# Select a script execution method
367	case $this_script in
368	*kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;;
369	*util-linux) ROOT_RunAsRoot "${file}" ;;
370	*) CHROOT_wrt_RunAsRoot "${file}" ;;
371	esac
372	#
373	# Housekeeping...remove the build directory(ies), except if the package build fails.
374	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
375	#
376	# Include a touch of the target name so make can check if it's already been made.
377	wrt_touch
378	#
379	#--------------------------------------------------------------------#
380	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
381	#--------------------------------------------------------------------#
382	#
383	# Keep the script file name for Makefile dependencies.
384	PREV=$this_script
385
386	done # for file in...
387	}
388
389
390	#--------------------------------------#
391	boot_Makefiles() { #
392	#--------------------------------------#
393
394	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
395	#
396	# Create a target bootable partition containing a compile environment. Later
397	# on we boot into this environment and contine the build.
398	#
399	for file in boot/* ; do
400	# Keep the script file name
401	this_script=`basename $file`
402
403	# A little housekeeping on the scripts
404	case $this_script in
405	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
406	whatnext) continue ;;
407	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
408	*kernel) # if there is no kernel config file do not build the kernel
409	[[ -z $CONFIG ]] && continue
410	# Copy the config file to /sources with a standardized name
411	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
412	;;
413	esac
414	#
415	# First append each name of the script files to a list (this will become
416	# the names of the targets in the Makefile
417	case "${this_script}" in
418	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
419	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
420	*) boottools="$boottools $this_script" ;;
421	esac
422	#
423	# Grab the name of the target, strip id number and misc words.
424	case $this_script in
425	*kernel) name=linux ;;
426	*bootscripts) name="bootscripts-cross-lfs" ;;
427	*udev-rules) name="udev-cross-lfs" ;;
428	*grub-build) name=grub ;;
429	*-aboot-build) name=aboot ;;
430	*yaboot-build) name=yaboot ;;
431	*colo-build) name=colo ;;
432	*silo-build) name=silo ;;
433	*arcload-build) name=arcload ;;
434	*lilo-build) name=lilo ;;
435	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
436	esac
437	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
438	pkg_tarball=$(get_package_tarball_name $name)
439
440	#--------------------------------------------------------------------#
441	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
442	#--------------------------------------------------------------------#
443	#
444	# Drop in the name of the target on a new line, and the previous target
445	# as a dependency. Also call the echo_message function.
446	LUSER_wrt_target "${this_script}" "$PREV"
447	#
448	# If $pkg_tarball isn't empty, we've got a package...
449	# Insert instructions for unpacking the package and changing directories
450	#
451	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
452	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
453	#
454	# Select a script execution method
455	case $this_script in
456	# The following 2 scripts are defined in the /boot directory but need
457	# to be run as a root user. Set them up here but run them in another phase
458	changingowner) wrt_RunAsRoot "${this_script}" "${file}" ;;
459	devices) wrt_RunAsRoot "${this_script}" "${file}" ;;
460	fstab) if [[ -n "$FSTAB" ]]; then
461	LUSER_wrt_CopyFstab
462	else
463	LUSER_wrt_RunAsUser "${file}"
464	fi
465	;;
466	*) LUSER_wrt_RunAsUser "${file}" ;;
467	esac
468	#
469	# Housekeeping...remove any build directory(ies) except if the package build fails.
470	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
471	#
472	# Include a touch of the target name so make can check if it's already been made.
473	wrt_touch
474	#
475	#--------------------------------------------------------------------#
476	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
477	#--------------------------------------------------------------------#
478	#
479	# Keep the script file name for Makefile dependencies.
480	PREV=$this_script
481
482	done
483	}
484
485
486	#--------------------------------------#
487	chroot_testsuite_tools_Makefiles() { #
488	#--------------------------------------#
489	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
490
491	for file in testsuite-tools/* ; do
492	# Keep the script file name
493	this_script=`basename $file`
494
495	# First append each name of the script files to a list (this will become
496	# the names of the targets in the Makefile
497	testsuitetools="$testsuitetools $this_script"
498
499	# Grab the name of the target, strip id number, XXX-script
500	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
501	-e 's@-64bit@@' \
502	-e 's@-64@@' \
503	-e 's@64@@' \
504	-e 's@n32@@'`
505
506	pkg_tarball=$(get_package_tarball_name $name)
507
508	#--------------------------------------------------------------------#
509	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
510	#--------------------------------------------------------------------#
511	#
512	# Drop in the name of the target on a new line, and the previous target
513	# as a dependency. Also call the echo_message function.
514	CHROOT_wrt_target "${this_script}" "$PREV"
515	#
516	CHROOT_Unpack "$pkg_tarball"
517	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
518	#
519	CHROOT_wrt_RunAsRoot "${file}"
520	#
521	CHROOT_wrt_RemoveBuildDirs "${name}"
522	#
523	# Include a touch of the target name so make can check if it's already been made.
524	wrt_touch
525	#
526	#--------------------------------------------------------------------#
527	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
528	#--------------------------------------------------------------------#
529	#
530	# Keep the script file name for Makefile dependencies.
531	PREV=$this_script
532
533	done
534	}
535
536	#--------------------------------------#
537	boot_testsuite_tools_Makefiles() { #
538	#--------------------------------------#
539	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
540	for file in testsuite-tools/* ; do
541	# Keep the script file name
542	this_script=`basename $file`
543
544	# First append each name of the script files to a list (this will become
545	# the names of the targets in the Makefile
546	PREV=
547	testsuitetools="$testsuitetools $this_script"
548
549	# Grab the name of the target, strip id number, XXX-script
550	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
551	-e 's@-64bit@@' \
552	-e 's@-64@@' \
553	-e 's@64@@' \
554	-e 's@n32@@'`
555
556	pkg_tarball=$(get_package_tarball_name $name)
557
558	#--------------------------------------------------------------------#
559	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
560	#--------------------------------------------------------------------#
561	#
562	# Drop in the name of the target on a new line, and the previous target
563	# as a dependency. Also call the echo_message function.
564	BOOT_wrt_target "${this_script}" "$PREV"
565	#
566	BOOT_wrt_Unpack "$pkg_tarball"
567	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
568	#
569	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
570	#
571	BOOT_wrt_RemoveBuildDirs "${name}"
572	#
573	# Include a touch of the target name so make can check if it's already been made.
574	wrt_touch
575	#
576	#--------------------------------------------------------------------#
577	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
578	#--------------------------------------------------------------------#
579	#
580	# Keep the script file name for Makefile dependencies.
581	PREV=$this_script
582
583	done
584
585	}
586
587
588	#--------------------------------------#
589	chroot_final_system_Makefiles() { #
590	#--------------------------------------#
591	# Set envars and scripts for iteration targets
592	LOGS="" # Start with an empty global LOGS envar
593	if [[ -z "$1" ]] ; then
594	local N=""
595	else
596	local N=-build_$1
597	local basicsystem=""
598	mkdir final-system$N
599	cp final-system/* final-system$N
600	for script in final-system$N/* ; do
601	# Overwrite existing symlinks, files, and dirs
602	sed -e 's/ln -sv/&f/g' \
603	-e 's/mv -v/&f/g' \
604	-e 's/mkdir -v/&p/g' -i ${script}
605	done
606	# Remove Bzip2 binaries before make install
607	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
608	# Delete *old Readline libraries just after make install
609	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
610	fi
611
612	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
613
614	for file in final-system$N/* ; do
615	# Keep the script file name
616	this_script=`basename $file`
617
618	# Test if the stripping phase must be skipped.
619	# Skip alsp temp-perl for iterative runs
620	case $this_script in
621	stripping) [[ "$STRIP" = "n" ]] && continue ;;
622	temp-perl) [[ -n "$N" ]] && continue ;;
623	esac
624
625	# Grab the name of the target, strip id number, XXX-script
626	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
627	-e 's@temp-@@' \
628	-e 's@-64bit@@' \
629	-e 's@-64@@' \
630	-e 's@64@@' \
631	-e 's@n32@@'`
632
633	# Find the version of the command files, if it corresponds with the building of
634	# a specific package. We need this here to can skip scripts not needed for
635	# iterations rebuilds
636	pkg_tarball=$(get_package_tarball_name $name)
637
638	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
639	case "${this_script}" in
640	stripping) ;;
641	*) continue ;;
642	esac
643	fi
644
645	# Append each name of the script files to a list (this will become
646	# the names of the targets in the Makefile
647	basicsystem="$basicsystem ${this_script}${N}"
648
649	# Append each name of the script files to a list (this will become
650	# the names of the logs to be moved for each iteration)
651	LOGS="$LOGS ${this_script}"
652
653	#--------------------------------------------------------------------#
654	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
655	#--------------------------------------------------------------------#
656	#
657	# Drop in the name of the target on a new line, and the previous target
658	# as a dependency. Also call the echo_message function.
659	CHROOT_wrt_target "${this_script}${N}" "$PREV"
660
661	# If $pkg_tarball isn't empty, we've got a package...
662	if [ "$pkg_tarball" != "" ] ; then
663	CHROOT_Unpack "$pkg_tarball"
664	# If the testsuites must be run, initialize the log file
665	case $name in
666	binutils \| gcc \| glibc )
667	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
668	;;
669	* )
670	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
671	;;
672	esac
673	# If using optimizations, write the instructions
674	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
675	fi
676	#
677	CHROOT_wrt_RunAsRoot "${file}"
678	#
679	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
680	#
681	# Include a touch of the target name so make can check if it's already been made.
682	wrt_touch
683	#
684	#--------------------------------------------------------------------#
685	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
686	#--------------------------------------------------------------------#
687	#
688	# Keep the script file name for Makefile dependencies.
689	PREV=${this_script}${N}
690	# Set system_build envar for iteration targets
691	system_build=$basicsystem
692	done # for file in final-system/* ...
693	}
694
695	#--------------------------------------#
696	boot_final_system_Makefiles() { #
697	#--------------------------------------#
698	# Set envars and scripts for iteration targets
699	LOGS="" # Start with an empty global LOGS envar
700	if [[ -z "$1" ]] ; then
701	local N=""
702	# The makesys phase was initiated in bm_testsuite_tools_makefile
703	[[ "$TEST" = 0 ]] && PREV=""
704	else
705	local N=-build_$1
706	local basicsystem=""
707	mkdir final-system$N
708	cp final-system/* final-system$N
709	for script in final-system$N/* ; do
710	# Overwrite existing symlinks, files, and dirs
711	sed -e 's/ln -sv/&f/g' \
712	-e 's/mv -v/&f/g' \
713	-e 's/mkdir -v/&p/g' -i ${script}
714	done
715	# Remove Bzip2 binaries before make install
716	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
717	# Delete *old Readline libraries just after make install
718	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
719	fi
720
721	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
722
723	for file in final-system$N/* ; do
724	# Keep the script file name
725	this_script=`basename $file`
726
727	# Test if the stripping phase must be skipped
728	# Skip alsp temp-perl for iterative runs
729	case $this_script in
730	stripping) [[ "$STRIP" = "n" ]] && continue ;;
731	temp-perl) [[ -n "$N" ]] && continue ;;
732	esac
733
734	# Grab the name of the target, strip id number, XXX-script
735	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
736	-e 's@temp-@@' \
737	-e 's@-64bit@@' \
738	-e 's@-64@@' \
739	-e 's@64@@' \
740	-e 's@n32@@'`
741
742	# Find the version of the command files, if it corresponds with the building of
743	# a specific package. We need this here to can skip scripts not needed for
744	# iterations rebuilds
745
746	pkg_tarball=$(get_package_tarball_name $name)
747
748	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
749	case "${this_script}" in
750	stripping) ;;
751	*) continue ;;
752	esac
753	fi
754
755	# Append each name of the script files to a list (this will become
756	# the names of the targets in the Makefile
757	basicsystem="$basicsystem ${this_script}${N}"
758
759	# Append each name of the script files to a list (this will become
760	# the names of the logs to be moved for each iteration)
761	LOGS="$LOGS ${this_script}"
762
763	#--------------------------------------------------------------------#
764	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
765	#--------------------------------------------------------------------#
766	#
767	# Drop in the name of the target on a new line, and the previous target
768	# as a dependency. Also call the echo_message function.
769	BOOT_wrt_target "${this_script}${N}" "$PREV"
770
771	# If $pkg_tarball isn't empty, we've got a package...
772	if [ "$pkg_tarball" != "" ] ; then
773	FILE="$pkg_tarball"
774	BOOT_wrt_Unpack "$FILE"
775	# If the testsuites must be run, initialize the log file
776	case $name in
777	binutils \| gcc \| glibc )
778	[[ "$TEST" != "0" ]] && BOOT_wrt_test_log "${this_script}"
779	;;
780	* )
781	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && BOOT_wrt_test_log "${this_script}"
782	;;
783	esac
784	# If using optimizations, write the instructions
785	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
786	fi
787	#
788	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
789	#
790	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
791	#
792	# Include a touch of the target name so make can check if it's already been made.
793	wrt_touch
794	#
795	#--------------------------------------------------------------------#
796	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
797	#--------------------------------------------------------------------#
798	#
799	# Keep the script file name for Makefile dependencies.
800	PREV=${this_script}${N}
801	# Set system_build envar for iteration targets
802	system_build=$basicsystem
803	done # for file in final-system/* ...
804
805	}
806
807	#--------------------------------------#
808	chroot_bootscripts_Makefiles() { #
809	#--------------------------------------#
810	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
811
812	for file in bootscripts/* ; do
813	# Keep the script file name
814	this_script=`basename $file`
815
816	case $this_script in
817	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
818	console) continue ;; # Use the files that came with the bootscripts
819	*) ;;
820	esac
821
822	# First append each name of the script files to a list (this will become
823	# the names of the targets in the Makefile
824	bootscripttools="$bootscripttools $this_script"
825
826	# Grab the name of the target, strip id number, XXX-script
827	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
828	-e 's@-64bit@@' \
829	-e 's@-64@@' \
830	-e 's@64@@' \
831	-e 's@n32@@'`
832	case $name in
833	bootscripts) name=bootscripts-cross-lfs ;;
834	*udev-rules) name=udev-cross-lfs ;;
835	esac
836
837	pkg_tarball=$(get_package_tarball_name $name)
838
839	#--------------------------------------------------------------------#
840	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
841	#--------------------------------------------------------------------#
842	#
843	# Drop in the name of the target on a new line, and the previous target
844	# as a dependency. Also call the echo_message function.
845	CHROOT_wrt_target "${this_script}" "$PREV"
846	#
847	# If $pkg_tarball isn't empty, we've got a package...
848	#
849	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
850	#
851	CHROOT_wrt_RunAsRoot "${file}"
852	#
853	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
854	#
855	# Include a touch of the target name so make can check if it's already been made.
856	wrt_touch
857	#
858	#--------------------------------------------------------------------#
859	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
860	#--------------------------------------------------------------------#
861	#
862	# Keep the script file name for Makefile dependencies.
863	PREV=$this_script
864
865	done # for file in bootscripts/* ...
866	}
867
868	#--------------------------------------#
869	boot_bootscripts_Makefiles() { #
870	#--------------------------------------#
871	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
872
873	for file in bootscripts/* ; do
874	# Keep the script file name
875	this_script=`basename $file`
876
877	case $this_script in
878	*udev) continue ;; # This is not a script but a commentary
879	console) continue ;; # Use the files that came with the bootscripts
880	*) ;;
881	esac
882
883	# First append each name of the script files to a list (this will become
884	# the names of the targets in the Makefile
885	bootscripttools="$bootscripttools $this_script"
886
887	# Grab the name of the target, strip id number, XXX-script
888	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
889	-e 's@-64bit@@' \
890	-e 's@-64@@' \
891	-e 's@64@@' \
892	-e 's@n32@@'`
893	case $name in
894	bootscripts) name=bootscripts-cross-lfs ;;
895	*udev-rules) name=udev-cross-lfs ;;
896	esac
897
898	pkg_tarball=$(get_package_tarball_name $name)
899
900	#--------------------------------------------------------------------#
901	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
902	#--------------------------------------------------------------------#
903	#
904	# Drop in the name of the target on a new line, and the previous target
905	# as a dependency. Also call the echo_message function.
906	BOOT_wrt_target "${this_script}" "$PREV"
907	#
908	# If $pkg_tarball isn't empty, we've got a package...
909	#
910	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
911	#
912	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
913	#
914	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
915	#
916	# Include a touch of the target name so make can check if it's already been made.
917	wrt_touch
918	#
919	#--------------------------------------------------------------------#
920	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
921	#--------------------------------------------------------------------#
922	#
923	# Keep the script file name for Makefile dependencies.
924	PREV=$this_script
925
926	done # for file in bootscripts/* ...
927	}
928
929	#--------------------------------------#
930	chroot_bootable_Makefiles() { #
931	#--------------------------------------#
932	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
933
934	for file in {bootable,the-end}/* ; do
935	# Keep the script file name
936	this_script=`basename $file`
937
938	# A little housekeeping on the scripts
939	case $this_script in
940	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
941	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
942	*kernel) # if there is no kernel config file do not build the kernel
943	[[ -z $CONFIG ]] && continue
944	# Copy the config file to /sources with a standardized name
945	cp $CONFIG $BUILDDIR/sources/kernel-config
946	;;
947	esac
948	#
949	# First append each name of the script files to a list (this will become
950	# the names of the targets in the Makefile
951	bootabletools="$bootabletools $this_script"
952	#
953	# Grab the name of the target, strip id number and misc words.
954	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
955	case $this_script in
956	kernel) name=linux
957	;;
958	esac
959
960	pkg_tarball=$(get_package_tarball_name $name)
961
962	#--------------------------------------------------------------------#
963	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
964	#--------------------------------------------------------------------#
965	#
966	# Drop in the name of the target on a new line, and the previous target
967	# as a dependency. Also call the echo_message function.
968	CHROOT_wrt_target "${this_script}" "$PREV"
969	#
970	# If $pkg_tarball isn't empty, we've got a package...
971	# Insert instructions for unpacking the package and changing directories
972	#
973	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
974	#
975	# Select a script execution method
976	case $this_script in
977	fstab) if [[ -n "$FSTAB" ]]; then
978	CHROOT_wrt_CopyFstab
979	else
980	CHROOT_wrt_RunAsRoot "${file}"
981	fi
982	;;
983	*) CHROOT_wrt_RunAsRoot "${file}"
984	;;
985	esac
986	#
987	# Housekeeping...remove any build directory(ies) except if the package build fails.
988	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
989	#
990	# Include a touch of the target name so make can check if it's already been made.
991	wrt_touch
992	#
993	#--------------------------------------------------------------------#
994	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
995	#--------------------------------------------------------------------#
996	#
997	# Keep the script file name for Makefile dependencies.
998	PREV=$this_script
999
1000	done
1001
1002	# Add SBU-disk_usage report target if required
1003	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
1004
1005	}
1006
1007	#--------------------------------------#
1008	boot_bootable_Makefiles() { #
1009	#--------------------------------------#
1010	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
1011
1012	for file in {bootable,the-end}/* ; do
1013	# Keep the script file name
1014	this_script=`basename $file`
1015
1016	# A little housekeeping on the scripts
1017	case $this_script in
1018	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
1019	*kernel) # if there is no kernel config file do not build the kernel
1020	[[ -z $CONFIG ]] && continue
1021	# Copy the named config file to /sources with a standardized name
1022	cp $CONFIG $BUILDDIR/sources/kernel-config
1023	;;
1024	esac
1025	#
1026	# First append each name of the script files to a list (this will become
1027	# the names of the targets in the Makefile
1028	bootabletools="$bootabletools $this_script"
1029	#
1030	# Grab the name of the target, strip id number and misc words.
1031	case $this_script in
1032	*kernel) name=linux ;;
1033	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
1034	esac
1035
1036	pkg_tarball=$(get_package_tarball_name $name)
1037
1038	#--------------------------------------------------------------------#
1039	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
1040	#--------------------------------------------------------------------#
1041	#
1042	# Drop in the name of the target on a new line, and the previous target
1043	# as a dependency. Also call the echo_message function.
1044	BOOT_wrt_target "${this_script}" "$PREV"
1045	#
1046	# If $pkg_tarball isn't empty, we've got a package...
1047	# Insert instructions for unpacking the package and changing directories
1048	#
1049	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball"
1050	#
1051	# Select a script execution method
1052	case $this_script in
1053	fstab) if [[ -n "$FSTAB" ]]; then
1054	# Minimal boot mode has no access to original file, store in /sources
1055	cp $FSTAB $BUILDDIR/sources/fstab
1056	BOOT_wrt_CopyFstab "${this_script}"
1057	else
1058	BOOT_wrt_RunAsRoot "${this_script}" "${file}"
1059	fi
1060	;;
1061	*) BOOT_wrt_RunAsRoot "${this_script}" "${file}" ;;
1062	esac
1063	#
1064	# Housekeeping...remove any build directory(ies) except if the package build fails.
1065	[[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}"
1066	#
1067	# Include a touch of the target name so make can check if it's already been made.
1068	wrt_touch
1069	#
1070	#--------------------------------------------------------------------#
1071	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
1072	#--------------------------------------------------------------------#
1073	#
1074	# Keep the script file name for Makefile dependencies.
1075	PREV=$this_script
1076	done
1077
1078	# Add SBU-disk_usage report target if required
1079	if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi
1080
1081
1082	}
1083
1084
1085	#--------------------------------------#
1086	build_Makefile() { # Construct a Makefile from the book scripts
1087	#--------------------------------------#
1088	#
1089	# Script crashes if error trapping is on
1090	#
1091	set +e
1092	declare -f method_cmds
1093	declare -f testsuite_cmds
1094	declare -f final_sys_cmds
1095	declare -f bootscripts_cmds
1096	declare -f bootable_cmds
1097	set -e
1098
1099	echo "...Creating Makefile... ${BOLD}START${OFF}"
1100
1101	cd $JHALFSDIR/${PROGNAME}-commands
1102	# Start with a clean files
1103	>$MKFILE
1104	>$MKFILE.tmp
1105
1106	method_cmds=${METHOD}_Makefiles
1107	testsuite_cmds=${METHOD}_testsuite_tools_Makefiles
1108	final_sys_cmds=${METHOD}_final_system_Makefiles
1109	bootscripts_cmds=${METHOD}_bootscripts_Makefiles
1110	bootable_cmds=${METHOD}_bootable_Makefiles
1111
1112	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
1113	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
1114	temptools_Makefiles # mk_TEMP (LUSER) $temptools
1115	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1116	if [[ ! $TEST = "0" ]]; then
1117	$testsuite_cmds # mk_SYSTOOLS (CHROOT) $testsuitetools
1118	fi
1119	$final_sys_cmds # mk_FINAL (CHROOT) $basicsystem
1120	# Add the iterations targets, if needed
1121	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
1122	$bootscripts_cmds # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1123	$bootable_cmds # mk_BOOTABLE (CHROOT) $bootabletools
1124
1125	# Add a header, some variables and include the function file
1126	# to the top of the real Makefile.
1127	(
1128	cat << EOF
1129	$HEADER
1130
1131	SRC = /sources
1132	MOUNT_PT = $BUILDDIR
1133	PKG_LST = $PKG_LST
1134	LUSER = $LUSER
1135	LGROUP = $LGROUP
1136	SCRIPT_ROOT = $SCRIPT_ROOT
1137
1138	BASEDIR = \$(MOUNT_PT)
1139	SRCSDIR = \$(BASEDIR)/sources
1140	CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands
1141	LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs
1142	TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs
1143
1144	crSRCSDIR = /sources
1145	crCMDSDIR = /\$(SCRIPT_ROOT)/$PROGNAME-commands
1146	crLOGDIR = /\$(SCRIPT_ROOT)/logs
1147	crTESTLOGDIR = /\$(SCRIPT_ROOT)/test-logs
1148
1149	SU_LUSER = su - \$(LUSER) -c
1150	LUSER_HOME = /home/\$(LUSER)
1151	PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n"
1152	PRT_DU_CR = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) / \`\n"
1153
1154	include makefile-functions
1155
1156	EOF
1157	) > $MKFILE
1158
1159	# Add chroot commands
1160	if [ "$METHOD" = "chroot" ] ; then
1161	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
1162	chroot=`cat chroot/chroot \| \
1163	sed -e "s@chroot@$CHROOT_LOC@" \
1164	-e '/#!\/tools\/bin\/bash/d' \
1165	-e '/^export/d' \
1166	-e '/^logout/d' \
1167	-e 's@ \\\@ @g' \| \
1168	tr -d '\n' \| \
1169	sed -e 's/ */ /g' \
1170	-e 's\|\\$\|&&\|g' \
1171	-e 's\|exit\|\|g' \
1172	-e 's\|$\| -c\|' \
1173	-e 's\|"$$CLFS"\|$(MOUNT_PT)\|'\
1174	-e 's\|set -e\|\|'`
1175	echo -e "CHROOT1= $chroot\n" >> $MKFILE
1176	fi
1177
1178	################## CHROOT ####################
1179
1180	if [[ "${METHOD}" = "chroot" ]]; then
1181	(
1182	cat << EOF
1183
1184	all: mk_SETUP mk_CROSS mk_TEMP restore_luser_env mk_SYSTOOLS mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE do-housekeeping
1185	@\$(call echo_finished,$VERSION)
1186
1187	#---------------AS ROOT
1188	mk_SETUP:
1189	@\$(call echo_SU_request)
1190	@sudo make SETUP
1191	@touch \$@
1192
1193	#---------------AS LUSER
1194	mk_CROSS: mk_SETUP
1195	@\$(call echo_PHASE,Cross Tool)
1196	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" )
1197	@touch \$@
1198
1199	mk_TEMP: mk_CROSS
1200	@\$(call echo_PHASE,Temporary Tools)
1201	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" )
1202	@touch \$@
1203
1204	#
1205	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
1206	# chroot environment. (Unless someone knows a different way)
1207	# Manually create the /bin directory and provide link to the /tools dir.
1208	# Also change the original symlink creation to include (f)orce to prevent failure due to
1209	# pre-existing links.
1210
1211	#---------------CHROOT JAIL
1212	mk_SYSTOOLS: mk_TEMP $orphan_scripts
1213	@mkdir \$(MOUNT_PT)/bin && \\
1214	cd \$(MOUNT_PT)/bin && \\
1215	ln -sf /tools/bin/bash bash; ln -sf bash sh
1216	@sed -e 's\|^ln -sv\|ln -svf\|' -i \$(CMDSDIR)/chroot/082-createfiles
1217	@\$(call echo_CHROOT_request)
1218	@\$(call echo_PHASE, Chroot systools)
1219	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make SYSTOOLS")
1220	@touch \$@
1221
1222	mk_FINAL: mk_SYSTOOLS
1223	@\$(call echo_PHASE,Final System)
1224	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make FINAL")
1225	@touch \$@
1226
1227	mk_BOOTSCRIPT: mk_FINAL
1228	@\$(call echo_PHASE,Bootscript)
1229	@\$(call echo_CHROOT_request)
1230	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTSCRIPT")
1231	@touch \$@
1232
1233	mk_BOOTABLE: mk_BOOTSCRIPT
1234	@\$(call echo_PHASE, Make bootable )
1235	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTABLE")
1236	@touch \$@
1237
1238	EOF
1239	) >> $MKFILE
1240	fi
1241
1242	################### BOOT #####################
1243
1244	if [[ "${METHOD}" = "boot" ]]; then
1245	(
1246	cat << EOF
1247
1248	all: mk_SETUP mk_CROSS mk_TEMP mk_SYSTOOLS $orphan_scripts restore-luser-env
1249	@\$(call echo_boot_finished,$VERSION)
1250
1251	makesys: mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE
1252	@\$(call echo_finished,$VERSION)
1253
1254	#---------------AS ROOT
1255
1256	mk_SETUP:
1257	@\$(call echo_SU_request)
1258	@sudo make SETUP
1259	@touch \$@
1260
1261	#---------------AS LUSER
1262
1263	mk_CROSS: mk_SETUP
1264	@\$(call echo_PHASE,Cross Tool)
1265	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" )
1266	@touch \$@
1267
1268	mk_TEMP: mk_CROSS
1269	@\$(call echo_PHASE,Temporary Tools)
1270	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" )
1271	@touch \$@
1272
1273	mk_SYSTOOLS: mk_TEMP
1274	@\$(call echo_PHASE,Minimal Boot system)
1275	@( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SYSTOOLS" )
1276	@touch \$@
1277
1278	#---------------AS ROOT
1279
1280	mk_FINAL:
1281	@\$(call echo_PHASE,Final System)
1282	@( make FINAL )
1283	@touch \$@
1284
1285	mk_BOOTSCRIPT: mk_FINAL
1286	@\$(call echo_PHASE,Bootscript)
1287	@( make BOOTSCRIPT )
1288	@touch \$@
1289
1290	mk_BOOTABLE: mk_BOOTSCRIPT
1291	@\$(call echo_PHASE,Making Bootable)
1292	@( make BOOTABLE )
1293	@touch \$@
1294
1295	EOF
1296	) >> $MKFILE
1297	fi
1298
1299	(
1300	cat << EOF
1301
1302	SETUP: $host_prep
1303	CROSS: $cross_tools
1304	TEMP: $temptools
1305	SYSTOOLS: ${chroottools}${boottools}
1306	FINAL: $testsuitetools $basicsystem
1307	BOOTSCRIPT: $bootscripttools
1308	BOOTABLE: $bootabletools
1309
1310	restart:
1311	@echo "This feature does not exist for the CLFS makefile. (yet)"
1312
1313	restore-luser-env:
1314	@\$(call echo_message, Building)
1315	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
1316	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
1317	fi;
1318	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
1319	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
1320	fi;
1321	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
1322	touch \$@ && \\
1323	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1324	echo --------------------------------------------------------------------------------\$(WHITE)
1325
1326	do-housekeeping:
1327	@-umount \$(MOUNT_PT)/dev/pts
1328	@-umount \$(MOUNT_PT)/dev/shm
1329	@-umount \$(MOUNT_PT)/dev
1330	@-umount \$(MOUNT_PT)/sys
1331	@-umount \$(MOUNT_PT)/proc
1332	@-if [ ! -f luser-exist ]; then \\
1333	userdel \$(LUSER); \\
1334	rm -rf /home/\$(LUSER); \\
1335	fi;
1336
1337	########################################################
1338
1339
1340	EOF
1341	) >> $MKFILE
1342
1343	# Bring over the items from the Makefile.tmp
1344	cat $MKFILE.tmp >> $MKFILE
1345	rm $MKFILE.tmp
1346
1347	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1348	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: