Context Navigation

source: CLFS/master.sh@ 4ed4a32

ablfs-more legacy trunk

Last change on this file since 4ed4a32 was 2e1c1c3, checked in by Pierre Labastie <pierre@…>, 7 years ago
Remove spaces at the end of lines
Property mode set to `100644`
File size: 43.7 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@install -dv \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@install -dv \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
38	mkdir -pv \$(LUSER_HOME); \\
39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
40	else \\
41	touch luser-exist; \\
42	fi
43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
46	chmod a+wt \$(SRCSDIR)
47	@\$(call housekeeping)
48
49	026-settingenvironment: 025-addinguser
50	@\$(call echo_message, Building)
51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
53	fi
54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
56	fi;
57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
67	echo "" >> \$(LUSER_HOME)/.bashrc && \\
68	EOF
69	) >> $MKFILE.tmp
70	if ! [ -e final-preps/*variables ]; then
71	(
72	cat << EOF
73	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
74	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
75	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
76	EOF
77	) >> $MKFILE.tmp
78	fi
79	(
80	cat << EOF
81	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
82	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
83	chmod a+wt \$(MOUNT_PT) && \\
84	if [ -d \$(MOUNT_PT)/var ]; then \\
85	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
86	fi && \\
87	touch envars && \\
88	chown \$(LUSER):\$(LGROUP) envars
89	@\$(call housekeeping)
90	EOF
91	) >> $MKFILE.tmp
92	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
93
94	}
95
96	#--------------------------------------#
97	final_preps_Makefiles() {
98	#--------------------------------------#
99	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
100	for file in final-preps/* ; do
101	this_script=`basename $file`
102	case $this_script in
103	*variables )
104	;;
105	*) continue; ;;
106	esac
107	# Set the dependency for the first target.
108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
109
110	# First append each name of the script files to a list (this will become
111	# the names of the targets in the Makefile
112	final_preps="$final_preps $this_script"
113
114	# No need to grab the package name
115
116	LUSER_wrt_target "${this_script}" "$PREV"
117	LUSER_wrt_RunAsUser "${file}"
118	wrt_touch
119	PREV=$this_script
120	done # for file in ....
121	}
122
123	#--------------------------------------#
124	cross_tools_Makefiles() { #
125	#--------------------------------------#
126	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
127
128	for file in cross-tools/* ; do
129	# Keep the script file name
130	this_script=`basename $file`
131	#
132	# Skip this script...
133	case $this_script in
134	cflags \| variables ) # work done in host_prep_Makefiles
135	continue; ;;
136	*) ;;
137	esac
138	#
139	# Set the dependency for the first target.
140	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
141
142	# First append each name of the script files to a list (this will become
143	# the names of the targets in the Makefile
144	cross_tools="$cross_tools $this_script"
145
146	# Grab the name of the target (minus the -headers or -cross in the case of gcc
147	# and binutils in chapter 5)
148	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
149	-e 's@-static@@' \
150	-e 's@-final@@' \
151	-e 's@-64@@' \
152	-e 's@-n32@@' \
153	-e 's@-pass1@@'`
154	pkg_tarball=$(get_package_tarball_name $name)
155
156	#--------------------------------------------------------------------#
157	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
158	#--------------------------------------------------------------------#
159	#
160	# Drop in the name of the target on a new line, and the previous target
161	# as a dependency. Also call the echo_message function.
162	LUSER_wrt_target "${this_script}" "$PREV"
163	#
164	# If $pkg_tarball isn't empty, we've got a package...
165	#
166	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
167	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
168	#
169	LUSER_wrt_RunAsUser "${file}"
170	#
171	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
172	#
173	# Include a touch of the target name so make can check if it's already been made.
174	wrt_touch
175	#
176	#--------------------------------------------------------------------#
177	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
178	#--------------------------------------------------------------------#
179	#
180	# Keep the script file name for Makefile dependencies.
181	PREV=$this_script
182
183	done # for file in ....
184	}
185
186	#--------------------------------------#
187	temptools_Makefiles() { #
188	#--------------------------------------#
189	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
190
191	for file in temp-system/* ; do
192	# Keep the script file name
193	this_script=`basename $file`
194	#
195	# Deal with any odd scripts..
196	case $this_script in
197	*choose) # The choose script will fail if you cannot enter the new environment
198	# If the 'boot' build method was chosen don't run the script
199	[[ $METHOD = "boot" ]] && continue; ;;
200	*) ;;
201	esac
202
203	#
204	# First append each name of the script files to a list (this will become
205	# the names of the targets in the Makefile
206	temptools="$temptools $this_script"
207
208	#
209	# Grab the name of the target, strip id number, XXX-script
210	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
211	#
212	pkg_tarball=$(get_package_tarball_name $name)
213
214	#--------------------------------------------------------------------#
215	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
216	#--------------------------------------------------------------------#
217	#
218	# Drop in the name of the target on a new line, and the previous target
219	# as a dependency. Also call the echo_message function.
220	LUSER_wrt_target "${this_script}" "$PREV"
221	#
222	# If $pkg_tarball isn't empty, we've got a package...
223	# Insert instructions for unpacking the package and to set the PKGDIR variable.
224	#
225	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
226	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
227	#
228	LUSER_wrt_RunAsUser "${file}"
229	#
230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
231	#
232	# Include a touch of the target name so make can check if it's already been made.
233	wrt_touch
234	#
235	#--------------------------------------------------------------------#
236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
237	#--------------------------------------------------------------------#
238	#
239	# Keep the script file name for Makefile dependencies.
240	PREV=$this_script
241	done # for file in ....
242	}
243
244
245	#--------------------------------------#
246	chroot_Makefiles() { #
247	#--------------------------------------#
248	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
249
250	for file in chroot/* ; do
251	# Keep the script file name
252	this_script=`basename $file`
253	#
254	# Skipping scripts is done now and not included in the build tree.
255	case $this_script in
256	chroot) continue ;;
257	esac
258
259	#
260	# First append each name of the script files to a list (this will become
261	# the names of the targets in the Makefile
262	case "${this_script}" in
263	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
264	*) chroottools="$chroottools $this_script" ;;
265	esac
266
267	# Grab the name of the target, strip id number, XXX-script
268	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
269
270	pkg_tarball=$(get_package_tarball_name $name)
271
272	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
273	# Same for e2fsprogs (in CLFS 1.1.0)
274	# .. Customized makefile entry
275	case "${this_script}" in
276	*util-linux)
277	LUSER_wrt_target "${this_script}" "$PREV"
278	LUSER_wrt_unpack "$pkg_tarball"
279	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
280	LUSER_wrt_RunAsUser "${file}"
281	LUSER_RemoveBuildDirs "${name}"
282	wrt_touch
283	temptools="$temptools $this_script"
284	continue ;;
285	*util-linux-ng)
286	LUSER_wrt_target "${this_script}" "$PREV"
287	LUSER_wrt_unpack "$pkg_tarball"
288	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
289	LUSER_wrt_RunAsUser "${file}"
290	LUSER_RemoveBuildDirs "${name}"
291	wrt_touch
292	temptools="$temptools $this_script"
293	continue ;;
294	*util-linux-libs)
295	LUSER_wrt_target "${this_script}" "$PREV"
296	LUSER_wrt_unpack "$pkg_tarball"
297	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
298	LUSER_wrt_RunAsUser "${file}"
299	LUSER_RemoveBuildDirs "${name}"
300	wrt_touch
301	temptools="$temptools $this_script"
302	continue ;;
303	*e2fsprogs)
304	LUSER_wrt_target "${this_script}" "$PREV"
305	LUSER_wrt_unpack "$pkg_tarball"
306	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
307	LUSER_wrt_RunAsUser "${file}"
308	LUSER_RemoveBuildDirs "${name}"
309	wrt_touch
310	temptools="$temptools $this_script"
311	continue ;;
312	*e2fsprogs-libs)
313	LUSER_wrt_target "${this_script}" "$PREV"
314	LUSER_wrt_unpack "$pkg_tarball"
315	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
316	LUSER_wrt_RunAsUser "${file}"
317	LUSER_RemoveBuildDirs "${name}"
318	wrt_touch
319	temptools="$temptools $this_script"
320	continue ;;
321	esac
322
323
324	#--------------------------------------------------------------------#
325	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
326	#--------------------------------------------------------------------#
327	#
328	# Drop in the name of the target on a new line, and the previous target
329	# as a dependency. Also call the echo_message function.
330	CHROOT_wrt_target "${this_script}" "$PREV"
331	#
332	# If $pkg_tarball isn't empty, we've got a package...
333	# Insert instructions for unpacking the package and changing directories
334	#
335	if [ "$pkg_tarball" != "" ] ; then
336	CHROOT_Unpack "$pkg_tarball"
337	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
338	fi
339	#
340	# Select a script execution method
341	case $this_script in
342	*kernfs) wrt_RunAsRoot "${file}" ;;
343	*) CHROOT_wrt_RunAsRoot "${file}" ;;
344	esac
345	#
346	# Housekeeping...remove the build directory(ies), except if the package build fails.
347	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
348	#
349	# Include a touch of the target name so make can check if it's already been made.
350	wrt_touch
351	#
352	#--------------------------------------------------------------------#
353	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
354	#--------------------------------------------------------------------#
355	#
356	# Keep the script file name for Makefile dependencies.
357	PREV=$this_script
358
359	done # for file in...
360	}
361
362
363	#--------------------------------------#
364	boot_Makefiles() { #
365	#--------------------------------------#
366
367	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
368	#
369	# Create a target bootable partition containing a compile environment. Later
370	# on we boot into this environment and contine the build.
371	#
372	for file in boot/* ; do
373	# Keep the script file name
374	this_script=`basename $file`
375
376	# A little housekeeping on the scripts
377	case $this_script in
378	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
379	how-to-view) continue ;;
380	whatnext) continue ;;
381	*fstab) [[ -z "${FSTAB}" ]] \|\|
382	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
383	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
384	*kernel) # if there is no kernel config file do not build the kernel
385	[[ -z $BOOT_CONFIG ]] && continue
386	# Copy the config file to /sources with a standardized name
387	[[ ${BOOT_CONFIG} == $BUILDDIR/sources/bootkernel-config ]] \|\|
388	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
389	;;
390	esac
391	#
392	# First append each name of the script files to a list (this will become
393	# the names of the targets in the Makefile). Those names differ depending
394	# on the version of the book. What makes the difference between those
395	# versions is the presence of "how-to-view" in the boot chapter.
396	if [ -f boot/*how-to-view ]; then
397	case "${this_script}" in
398	*changingowner)
399	orphan_scripts="${orphan_scripts} ${this_script}"
400	;;
401	*creatingdirs)
402	orphan_scripts="${orphan_scripts} ${this_script}"
403	;;
404	*createfiles)
405	orphan_scripts="${orphan_scripts} ${this_script}"
406	;;
407	*devices)
408	orphan_scripts="${orphan_scripts} ${this_script}"
409	;;
410	*flags)
411	orphan_scripts="${orphan_scripts} ${this_script}"
412	;;
413	*fstab)
414	orphan_scripts="${orphan_scripts} ${this_script}"
415	;;
416	*pwdgroup)
417	orphan_scripts="${orphan_scripts} ${this_script}"
418	;;
419	*settingenvironment)
420	orphan_scripts="${orphan_scripts} ${this_script}"
421	;;
422	*)
423	boottools="$boottools $this_script"
424	;;
425	esac
426	else
427	case "${this_script}" in
428	*changingowner)
429	orphan_scripts="${orphan_scripts} ${this_script}"
430	;;
431	*devices)
432	orphan_scripts="${orphan_scripts} ${this_script}"
433	;;
434	*)
435	boottools="$boottools $this_script"
436	;;
437	esac
438	fi
439	#
440	# Grab the name of the target, strip id number and misc words.
441	case $this_script in
442	*kernel) name=linux ;;
443	*bootscripts) name="bootscripts-cross-lfs" ;;
444	*boot-scripts) name="boot-scripts-cross-lfs" ;;
445	*udev-rules) name="udev-cross-lfs" ;;
446	*grub-build) name=grub ;;
447	*-aboot-build) name=aboot ;;
448	*yaboot-build) name=yaboot ;;
449	*colo-build) name=colo ;;
450	*silo-build) name=silo ;;
451	*arcload-build) name=arcload ;;
452	*lilo-build) name=lilo ;;
453	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
454	esac
455	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
456	pkg_tarball=$(get_package_tarball_name $name)
457
458	#--------------------------------------------------------------------#
459	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
460	#--------------------------------------------------------------------#
461	#
462	# Drop in the name of the target on a new line, and the previous target
463	# as a dependency. Also call the echo_message function.
464	LUSER_wrt_target "${this_script}" "$PREV"
465	#
466	# If $pkg_tarball isn't empty, we've got a package...
467	# Insert instructions for unpacking the package and changing directories
468	#
469	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
470	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
471	#
472	# Select a script execution method
473	if [ -f boot/*how-to-view ]; then
474	case $this_script in
475	# The following 8 scripts are defined in the /boot directory but need
476	# to be run as a root user. Set them up here but run them in another
477	# phase
478	*changingowner) wrt_RunAsRoot "${file}" ;;
479	*creatingdirs) wrt_RunAsRoot "${file}" ;;
480	*createfiles) wrt_RunAsRoot "${file}" ;;
481	*devices) wrt_RunAsRoot "${file}" ;;
482	*flags) wrt_RunAsRoot "${file}" ;;
483	*fstab)
484	if [[ -n "$FSTAB" ]]; then
485	LUSER_wrt_CopyFstab
486	else
487	wrt_RunAsRoot "${file}"
488	fi
489	;;
490	*pwdgroup) wrt_RunAsRoot "${file}" ;;
491	*settingenvironment) wrt_RunAsRoot "${file}" ;;
492	*) LUSER_wrt_RunAsUser "${file}" ;;
493	esac
494	else
495	case $this_script in
496	# The following 2 scripts are defined in the /boot directory but need
497	# to be run as a root user. Set them up here but run them in another
498	# phase
499	*changingowner) wrt_RunAsRoot "${file}" ;;
500	*devices) wrt_RunAsRoot "${file}" ;;
501	*fstab)
502	if [[ -n "${FSTAB}" ]]; then
503	LUSER_wrt_CopyFstab
504	else
505	LUSER_wrt_RunAsUser "${file}"
506	fi
507	;;
508	*) LUSER_wrt_RunAsUser "${file}" ;;
509	esac
510	fi
511	#
512	# Housekeeping...remove any build directory(ies) except if the package build fails.
513	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
514	#
515	# Include a touch of the target name so make can check if it's already been made.
516	wrt_touch
517	#
518	#--------------------------------------------------------------------#
519	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
520	#--------------------------------------------------------------------#
521	#
522	# Keep the script file name for Makefile dependencies.
523	PREV=$this_script
524
525	done
526	}
527
528
529	#--------------------------------------#
530	testsuite_tools_Makefiles() { #
531	#--------------------------------------#
532
533	if [[ "${METHOD}" = "chroot" ]]; then
534	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
535	else
536	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
537	PREV=""
538	fi
539
540	for file in testsuite-tools/* ; do
541	# Keep the script file name
542	this_script=`basename $file`
543
544	# First append each name of the script files to a list (this will become
545	# the names of the targets in the Makefile
546	testsuitetools="$testsuitetools $this_script"
547
548	# Grab the name of the target, strip id number, XXX-script
549	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
550	-e 's@-64bit@@' \
551	-e 's@-64@@' \
552	-e 's@64@@' \
553	-e 's@n32@@'`
554
555	pkg_tarball=$(get_package_tarball_name $name)
556
557	#--------------------------------------------------------------------#
558	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
559	#--------------------------------------------------------------------#
560	#
561	# Drop in the name of the target on a new line, and the previous target
562	# as a dependency. Also call the echo_message function.
563	CHROOT_wrt_target "${this_script}" "$PREV"
564	#
565	CHROOT_Unpack "$pkg_tarball"
566	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
567	#
568	CHROOT_wrt_RunAsRoot "${file}"
569	#
570	CHROOT_wrt_RemoveBuildDirs "${name}"
571	#
572	# Include a touch of the target name so make can check if it's already been made.
573	wrt_touch
574	#
575	#--------------------------------------------------------------------#
576	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
577	#--------------------------------------------------------------------#
578	#
579	# Keep the script file name for Makefile dependencies.
580	PREV=$this_script
581
582	done
583	}
584
585
586	#--------------------------------------#
587	final_system_Makefiles() { #
588	#--------------------------------------#
589	# Set envars and scripts for iteration targets
590	if [[ -z "$1" ]] ; then
591	local N=""
592	# In boot method the makesys phase was initiated in testsuite_tools_makefile
593	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
594	else
595	local N=-build_$1
596	local basicsystem=""
597	mkdir final-system$N
598	cp final-system/* final-system$N
599	for script in final-system$N/* ; do
600	# Overwrite existing symlinks, files, and dirs
601	sed -e 's/ln -sv/&f/g' \
602	-e 's/mv -v/&f/g' \
603	-e 's/mkdir -v/&p/g' -i ${script}
604	# Rename the scripts
605	mv ${script} ${script}$N
606	done
607	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
608	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
609	# Delete *old Readline libraries just after make install
610	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
611	fi
612
613	if [[ "${METHOD}" = "chroot" ]]; then
614	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
615	else
616	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
617	fi
618
619	for file in final-system$N/* ; do
620	# Keep the script file name
621	this_script=`basename $file`
622
623	# Test if the stripping phase must be skipped.
624	# Skip also temp-perl for iterative runs
625	case $this_script in
626	stripping) [[ "$STRIP" = "n" ]] && continue ;;
627	temp-perl) [[ -n "$N" ]] && continue ;;
628	esac
629
630	# Grab the name of the target, strip id number, XXX-script.
631	# name1 is partially stripped and should be used for logging files.
632	# name is completely stripped and is used for grabbing
633	# the package name.
634	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
635	-e 's,'$N',,'`
636	name=`echo $name1 \| sed -e 's@temp-@@' \
637	-e 's@-64bit@@' \
638	-e 's@-64@@' \
639	-e 's@64@@' \
640	-e 's@n32@@'`
641
642	# Find the version of the command files, if it corresponds with the building of
643	# a specific package. We need this here to can skip scripts not needed for
644	# iterations rebuilds
645	pkg_tarball=$(get_package_tarball_name $name)
646
647	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
648	case "${this_script}" in
649	stripping) ;;
650	*) continue ;;
651	esac
652	fi
653
654	# Append each name of the script files to a list (this will become
655	# the names of the targets in the Makefile
656	basicsystem="$basicsystem ${this_script}"
657
658	#--------------------------------------------------------------------#
659	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
660	#--------------------------------------------------------------------#
661	#
662	# Drop in the name of the target on a new line, and the previous target
663	# as a dependency. Also call the echo_message function.
664	CHROOT_wrt_target "${this_script}" "$PREV"
665
666	# If $pkg_tarball isn't empty, we've got a package...
667	if [ "$pkg_tarball" != "" ] ; then
668	# Touch timestamp file if installed files logs will be created.
669	# But only for the firt build when running iterative builds.
670	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
671	CHROOT_wrt_TouchTimestamp
672	fi
673	CHROOT_Unpack "$pkg_tarball"
674	# If the testsuites must be run, initialize the log file
675	case $name in
676	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
677	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
678	;;
679	* )
680	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
681	;;
682	esac
683	# If using optimizations, write the instructions
684	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
685	fi
686	#
687	CHROOT_wrt_RunAsRoot "${file}"
688	#
689	# Write installed files log and remove the build directory(ies)
690	# except if the package build fails.
691	if [ "$pkg_tarball" != "" ] ; then
692	CHROOT_wrt_RemoveBuildDirs "$name"
693	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
694	CHROOT_wrt_LogNewFiles "$name1"
695	fi
696	fi
697	#
698	# Include a touch of the target name so make can check
699	# if it's already been made.
700	wrt_touch
701	#
702	#--------------------------------------------------------------------#
703	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
704	#--------------------------------------------------------------------#
705	#
706	# Keep the script file name for Makefile dependencies.
707	PREV=${this_script}
708	# Set system_build envar for iteration targets
709	system_build=$basicsystem
710	done # for file in final-system/* ...
711	}
712
713	#--------------------------------------#
714	bootscripts_Makefiles() { #
715	#--------------------------------------#
716
717	# New versions of the book do not have bootscripts anymore
718	# (use systemd configuration files)
719	# Define a variable to be used for the right script directory to parse
720	if [ -d bootscripts ]; then
721	config="bootscripts"
722	else
723	config="system-config"
724	fi
725
726	if [[ "${METHOD}" = "chroot" ]]; then
727	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
728	else
729	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
730	fi
731
732	for file in $config/* ; do
733	# Keep the script file name
734	this_script=`basename $file`
735
736	case $this_script in
737	*udev) continue ;; # This is not a script but a comment, we want udev-rules
738	console) continue ;; # Use the files that came with the bootscripts
739	# fstab is now here (for 3.x.y)
740	*fstab) [[ -z "${FSTAB}" ]] \|\|
741	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
742	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
743	*) ;;
744	esac
745
746	# First append each name of the script files to a list (this will become
747	# the names of the targets in the Makefile
748	bootscripttools="$bootscripttools $this_script"
749
750	# Grab the name of the target, strip id number, XXX-script.
751	# name1 is partially stripped and should be used for logging files.
752	# name is completely stripped and is used for grabbing
753	# the package name.
754	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
755	name=`echo $name1 \| sed -e 's@-64bit@@' \
756	-e 's@-64@@' \
757	-e 's@64@@' \
758	-e 's@n32@@'`
759	case $name in
760	bootscripts) name=bootscripts-cross-lfs ;;
761	*udev-rules) name=udev-cross-lfs ;;
762	esac
763
764	pkg_tarball=$(get_package_tarball_name $name)
765
766	#--------------------------------------------------------------------#
767	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
768	#--------------------------------------------------------------------#
769	#
770	# Drop in the name of the target on a new line, and the previous target
771	# as a dependency. Also call the echo_message function.
772	CHROOT_wrt_target "${this_script}" "$PREV"
773	#
774	# If $pkg_tarball isn't empty, we've got a package...
775	#
776	if [ "$pkg_tarball" != "" ] ; then
777	if [ "${INSTALL_LOG}" = "y" ] ; then
778	CHROOT_wrt_TouchTimestamp
779	fi
780	CHROOT_Unpack "$pkg_tarball"
781	fi
782	#
783	case $this_script in
784	fstab) if [[ -n "$FSTAB" ]]; then
785	CHROOT_wrt_CopyFstab
786	else
787	CHROOT_wrt_RunAsRoot "${file}"
788	fi
789	;;
790	*) CHROOT_wrt_RunAsRoot "${file}"
791	;;
792	esac
793	#
794	# Write installed files log and remove the build directory(ies)
795	# except if the package build fails.
796	if [ "$pkg_tarball" != "" ] ; then
797	CHROOT_wrt_RemoveBuildDirs "$name"
798	if [ "${INSTALL_LOG}" = "y" ] ; then
799	CHROOT_wrt_LogNewFiles "$name1"
800	fi
801	fi
802	#
803	# Include a touch of the target name so make can check if it's already been made.
804	wrt_touch
805	#
806	#--------------------------------------------------------------------#
807	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
808	#--------------------------------------------------------------------#
809	#
810	# Keep the script file name for Makefile dependencies.
811	PREV=$this_script
812
813	done # for file in bootscripts/* ...
814	}
815
816	#--------------------------------------#
817	network_Makefiles() { #
818	#--------------------------------------#
819
820	if [[ "${METHOD}" = "chroot" ]]; then
821	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
822	else
823	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
824	fi
825
826	for file in network/* ; do
827	# Keep the script file name
828	this_script=`basename $file`
829
830	case $this_script in
831	*choose) continue ;; # This is not a script but a commentary.
832	*dhcp) continue ;; # Assume static networking.
833	*dhcpcd) continue ;; # Assume static networking.
834	*) ;;
835	esac
836
837	# First append each name of the script files to a list (this will become
838	# the names of the targets in the Makefile
839	networktools="$networktools $this_script"
840
841	# Grab the name of the target, strip id number, XXX-script
842	# name1 is partially stripped and should be used for logging files.
843	# name is completely stripped and is used for grabbing
844	# the package name.
845	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
846	name=`echo $name1 \| sed -e 's@-64bit@@' \
847	-e 's@-64@@' \
848	-e 's@64@@' \
849	-e 's@n32@@'`
850	case $name in
851	network-scripts) name=clfs-network-scripts ;;
852	esac
853
854	pkg_tarball=$(get_package_tarball_name $name)
855
856	#--------------------------------------------------------------------#
857	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
858	#--------------------------------------------------------------------#
859	#
860	# Drop in the name of the target on a new line, and the previous target
861	# as a dependency. Also call the echo_message function.
862	CHROOT_wrt_target "${this_script}" "$PREV"
863	#
864	# If $pkg_tarball isn't empty, we've got a package...
865	#
866	if [ "$pkg_tarball" != "" ] ; then
867	if [ "${INSTALL_LOG}" = "y" ] ; then
868	CHROOT_wrt_TouchTimestamp
869	fi
870	CHROOT_Unpack "$pkg_tarball"
871	fi
872	#
873	CHROOT_wrt_RunAsRoot "${file}"
874	#
875	# Write installed files log and remove the build directory(ies)
876	# except if the package build fails.
877	if [ "$pkg_tarball" != "" ] ; then
878	CHROOT_wrt_RemoveBuildDirs "$name"
879	if [ "${INSTALL_LOG}" = "y" ] ; then
880	CHROOT_wrt_LogNewFiles "$name1"
881	fi
882	fi
883	#
884	# Include a touch of the target name so make can check if it's already been made.
885	wrt_touch
886	#
887	#--------------------------------------------------------------------#
888	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
889	#--------------------------------------------------------------------#
890	#
891	# Keep the script file name for Makefile dependencies.
892	PREV=$this_script
893
894	done # for file in network/* ...
895	}
896
897	#--------------------------------------#
898	bootable_Makefiles() { #
899	#--------------------------------------#
900
901	if [[ "${METHOD}" = "chroot" ]]; then
902	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
903	else
904	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
905	fi
906
907
908	for file in bootable/* ; do
909	# Keep the script file name
910	this_script=`basename $file`
911
912	# A little housekeeping on the scripts
913	case $this_script in
914	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
915	*fstab) [[ -z "${FSTAB}" ]] \|\|
916	[[ ${FSTAB} == $BUILDDIR/sources/fstab ]] \|\|
917	cp ${FSTAB} $BUILDDIR/sources/fstab ;;
918	*kernel) # if there is no kernel config file do not build the kernel
919	[[ -z $CONFIG ]] && continue
920	# Copy the config file to /sources with a standardized name
921	[[ $CONFIG == $BUILDDIR/sources/kernel-config ]] \|\|
922	cp $CONFIG $BUILDDIR/sources/kernel-config
923	;;
924	esac
925	#
926	# First append each name of the script files to a list (this will become
927	# the names of the targets in the Makefile
928	bootabletools="$bootabletools $this_script"
929	#
930	# Grab the name of the target, strip id number and misc words.
931	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
932	case $this_script in
933	kernel) name=linux
934	;;
935	esac
936
937	pkg_tarball=$(get_package_tarball_name $name)
938
939	#--------------------------------------------------------------------#
940	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
941	#--------------------------------------------------------------------#
942	#
943	# Drop in the name of the target on a new line, and the previous target
944	# as a dependency. Also call the echo_message function.
945	CHROOT_wrt_target "${this_script}" "$PREV"
946	#
947	# If $pkg_tarball isn't empty, we've got a package...
948	# Insert instructions for unpacking the package and changing directories
949	#
950	if [ "$pkg_tarball" != "" ] ; then
951	if [ "${INSTALL_LOG}" = "y" ] ; then
952	CHROOT_wrt_TouchTimestamp
953	fi
954	CHROOT_Unpack "$pkg_tarball"
955	fi
956	#
957	# Select a script execution method
958	case $this_script in
959	fstab) if [[ -n "$FSTAB" ]]; then
960	CHROOT_wrt_CopyFstab
961	else
962	CHROOT_wrt_RunAsRoot "${file}"
963	fi
964	;;
965	*) CHROOT_wrt_RunAsRoot "${file}"
966	;;
967	esac
968	#
969	# Write installed files log and remove the build directory(ies)
970	# except if the package build fails.
971	if [ "$pkg_tarball" != "" ] ; then
972	CHROOT_wrt_RemoveBuildDirs "$name"
973	if [ "${INSTALL_LOG}" = "y" ] ; then
974	CHROOT_wrt_LogNewFiles "$name"
975	fi
976	fi
977	#
978	# Include a touch of the target name so make can check if it's already been made.
979	wrt_touch
980	#
981	#--------------------------------------------------------------------#
982	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
983	#--------------------------------------------------------------------#
984	#
985	# Keep the script file name for Makefile dependencies.
986	PREV=$this_script
987
988	done
989
990	}
991
992
993	#--------------------------------------#
994	build_Makefile() { # Construct a Makefile from the book scripts
995	#--------------------------------------#
996
997	echo "...Creating Makefile... ${BOLD}START${OFF}"
998
999	cd $JHALFSDIR/${PROGNAME}-commands
1000	# Start with clean files
1001	>$MKFILE
1002	>$MKFILE.tmp
1003
1004	method_cmds=${METHOD}_Makefiles
1005
1006	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
1007	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
1008	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
1009	temptools_Makefiles # mk_TEMP (LUSER) $temptools
1010	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1011	if [[ ! $TEST = "0" ]]; then
1012	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
1013	fi
1014	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
1015	# Add the iterations targets, if needed
1016	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
1017	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1018	if [ -d network ]; then
1019	network_Makefiles # If present, process network setup.
1020	fi
1021	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
1022
1023	# Add the CUSTOM_TOOLS targets, if needed
1024	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
1025
1026	# Add a header, some variables and include the function file
1027	# to the top of the real Makefile.
1028	wrt_Makefile_header
1029
1030	# Add chroot commands
1031	if [ "$METHOD" = "chroot" ] ; then
1032	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
1033	chroot=`cat chroot/???-chroot \| \
1034	sed -e "s@chroot@$CHROOT_LOC@" \
1035	-e '/#!\/bin\/bash/d' \
1036	-e '/^export/d' \
1037	-e '/^logout/d' \
1038	-e 's@ \\\@ @g' \| \
1039	tr -d '\n' \| \
1040	sed -e 's/ */ /g' \
1041	-e 's\|\\$\|&&\|g' \
1042	-e 's\|exit\|\|g' \
1043	-e 's\|$\| -c\|' \
1044	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
1045	-e 's\|set -e\|\|' \
1046	-e 's\|set +h\|\|'`
1047	echo -e "CHROOT1= $chroot\n" >> $MKFILE
1048	fi
1049
1050	################## CHROOT ####################
1051
1052	if [[ "${METHOD}" = "chroot" ]]; then
1053	(
1054	cat << EOF
1055
1056	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
1057	@sudo make do-housekeeping
1058	@echo "$VERSION - jhalfs build" > clfs-release && \\
1059	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
1060	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
1061	@\$(call echo_finished,$VERSION)
1062
1063	ck_UID:
1064	@if [ \`id -u\` = "0" ]; then \\
1065	echo "+--------------------------------------------------+"; \\
1066	echo "\|You cannot run this makefile from the root account\|"; \\
1067	echo "+--------------------------------------------------+"; \\
1068	exit 1; \\
1069	fi
1070
1071	#---------------AS ROOT
1072	mk_SETUP:
1073	@\$(call echo_SU_request)
1074	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1075	@touch \$@
1076
1077	#---------------AS LUSER
1078	mk_F_PREPS: mk_SETUP
1079	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
1080	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1081	@sudo make restore-luser-env
1082	@touch \$@
1083
1084	mk_SUDO: mk_F_PREPS
1085	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1086	@touch \$@
1087
1088	#---------------CHROOT JAIL
1089	mk_SYSTOOLS: mk_SUDO
1090	@\$(call echo_CHROOT_request)
1091	@\$(call echo_PHASE, CHROOT JAIL )
1092	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
1093	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
1094	@touch \$@
1095
1096	mk_BLFS_TOOL: create-sbu_du-report
1097	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1098	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1099	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
1100	fi;
1101	@touch \$@
1102
1103	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1104	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1105	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1106	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
1107	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
1108	fi;
1109	@touch \$@
1110
1111	SETUP: $host_prep
1112	AS_LUSER: $final_preps $cross_tools $temptools
1113	SUDO: $orphan_scripts
1114	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
1115	PREP_CHROOT_JAIL: ${chroottools}
1116	CHROOT_JAIL: SHELL=/tools/bin/bash
1117	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
1118	CUSTOM_TOOLS: $custom_list
1119
1120
1121	create-sbu_du-report: mk_SYSTOOLS
1122	@\$(call echo_message, Building)
1123	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
1124	./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
1125	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1126	fi;
1127	@touch \$@
1128
1129	do-housekeeping:
1130	@-umount \$(MOUNT_PT)/sys
1131	@-umount \$(MOUNT_PT)/proc
1132	@-if mountpoint -q \$(MOUNT_PT)/run; then \\
1133	umount \$(MOUNT_PT)/run; \\
1134	elif [ -h \$(MOUNT_PT)/dev/shm ]; then \\
1135	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
1136	umount \$(MOUNT_PT)/\$\$link; \\
1137	unset link; \\
1138	else \\
1139	umount \$(MOUNT_PT)/dev/shm; \\
1140	fi
1141	@-umount \$(MOUNT_PT)/dev/pts
1142	@-umount \$(MOUNT_PT)/dev
1143	@-rm /tools /cross-tools
1144	@-if [ ! -f luser-exist ]; then \\
1145	userdel \$(LUSER); \\
1146	rm -rf \$(LUSER_HOME); \\
1147	fi;
1148	EOF
1149	) >> $MKFILE
1150
1151	fi
1152
1153	################### BOOT #####################
1154
1155	if [[ "${METHOD}" = "boot" ]]; then
1156	(
1157	cat << EOF
1158
1159	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
1160	@sudo make restore-luser-env
1161	@sudo make do-housekeeping
1162	@\$(call echo_boot_finished,$VERSION)
1163
1164	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
1165	@echo "$VERSION - jhalfs build" > /etc/clfs-release
1166	@\$(call echo_finished,$VERSION)
1167
1168
1169	ck_UID:
1170	@if [ \`id -u\` = "0" ]; then \\
1171	echo "+--------------------------------------------------+"; \\
1172	echo "\|You cannot run this makefile from the root account\|"; \\
1173	echo "\|However, if this is the boot environment \|"; \\
1174	echo "\| the command you are looking for is \|"; \\
1175	echo "\| make makesys \|"; \\
1176	echo "\| to complete the build \|"; \\
1177	echo "+--------------------------------------------------+"; \\
1178	exit 1; \\
1179	fi
1180
1181	#---------------AS ROOT
1182
1183	mk_SETUP:
1184	@\$(call echo_SU_request)
1185	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1186	@touch \$@
1187
1188	#---------------AS LUSER
1189
1190	mk_F_PREPS: mk_SETUP
1191	@\$(call echo_PHASE,Final Preparations and Cross Tools)
1192	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1193	@touch \$@
1194
1195	mk_SUDO: mk_F_PREPS
1196	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1197	@touch \$@
1198
1199	#---------------AS ROOT
1200
1201	mk_FINAL:
1202	@\$(call echo_PHASE,Final System)
1203	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
1204	@touch \$@
1205
1206	mk_BLFS_TOOL: mk_FINAL
1207	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1208	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1209	( make -C $BLFS_ROOT/work ); \\
1210	fi;
1211	@touch \$@
1212
1213	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1214	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1215	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1216	mkdir -p ${TRACKING_DIR}; \\
1217	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
1218	fi;
1219	@touch \$@
1220
1221	SETUP: $host_prep
1222	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
1223	SUDO: $orphan_scripts
1224	AS_ROOT: SHELL=/tools/bin/bash
1225	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1226	CUSTOM_TOOLS: $custom_list
1227
1228	do-housekeeping:
1229	@-rm /tools /cross-tools
1230	@-if [ ! -f luser-exist ]; then \\
1231	userdel \$(LUSER); \\
1232	rm -rf \$(LUSER_HOME); \\
1233	fi;
1234
1235	EOF
1236	) >> $MKFILE
1237	fi
1238
1239	(
1240	cat << EOF
1241
1242	restore-luser-env:
1243	@\$(call echo_message, Building)
1244	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
1245	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
1246	fi;
1247	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
1248	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
1249	fi;
1250	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
1251	touch \$@ && \\
1252	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1253	echo --------------------------------------------------------------------------------\$(WHITE)
1254
1255	########################################################
1256
1257
1258	EOF
1259	) >> $MKFILE
1260
1261	# Bring over the items from the Makefile.tmp
1262	cat $MKFILE.tmp >> $MKFILE
1263	rm $MKFILE.tmp
1264
1265	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1266	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: