Context Navigation

source: CLFS/master.sh@ 9ae0875

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 9ae0875 was 9ae0875, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
CLFSx: Revised host_prep_Makefile targets.
Property mode set to `100644`
File size: 33.5 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@mkdir \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools / && \\
24	touch \$@ && \\
25	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
26	echo --------------------------------------------------------------------------------\$(WHITE)
27
28	024-creatingcrossdir: 023-creatingtoolsdir
29	@\$(call echo_message, Building)
30	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
31	rm -f /cross-tools && \\
32	ln -s \$(MOUNT_PT)/cross-tools / && \\
33	touch \$@ && \\
34	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
35	echo --------------------------------------------------------------------------------\$(WHITE)
36
37	025-addinguser: 024-creatingcrossdir
38	@\$(call echo_message, Building)
39	@if [ ! -d /home/\$(LUSER) ]; then \\
40	groupadd \$(LGROUP); \\
41	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
42	else \\
43	touch luser-exist; \\
44	fi;
45	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
46	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
47	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
48	chmod a+wt \$(SRCSDIR) && \\
49	touch \$@ && \\
50	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
51	echo --------------------------------------------------------------------------------\$(WHITE)
52
53	026-settingenvironment: 025-addinguser
54	@\$(call echo_message, Building)
55	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
56	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
57	fi;
58	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
59	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
60	fi;
61	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
62	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
63	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
64	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
65	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
66	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
67	echo "" >> /home/\$(LUSER)/.bashrc && \\
68	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
69	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
70	echo "" >> /home/\$(LUSER)/.bashrc && \\
71	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
72	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
73	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
74	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
75	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
76	touch envars && \\
77	chmod -R a+wt \$(MOUNT_PT) && \\
78	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
79	touch \$@ && \\
80	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
81	echo --------------------------------------------------------------------------------\$(WHITE)
82	EOF
83	) >> $MKFILE.tmp
84	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
85
86	}
87
88	#--------------------------------------#
89	cross_tools_Makefiles() { #
90	#--------------------------------------#
91	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
92
93	for file in cross-tools/* ; do
94	# Keep the script file name
95	this_script=`basename $file`
96	#
97	# Skip this script...
98	case $this_script in
99	cflags \| variables ) # work done in host_prep_Makefiles
100	continue; ;;
101	*) ;;
102	esac
103	#
104	# Set the dependency for the first target.
105	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
106
107	# First append each name of the script files to a list (this will become
108	# the names of the targets in the Makefile
109	cross_tools="$cross_tools $this_script"
110
111	# Grab the name of the target (minus the -headers or -cross in the case of gcc
112	# and binutils in chapter 5)
113	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
114	-e 's@-static@@' \
115	-e 's@-final@@' \
116	-e 's@-64@@' \
117	-e 's@-n32@@'`
118	pkg_tarball=$(get_package_tarball_name $name)
119
120	#--------------------------------------------------------------------#
121	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
122	#--------------------------------------------------------------------#
123	#
124	# Drop in the name of the target on a new line, and the previous target
125	# as a dependency. Also call the echo_message function.
126	LUSER_wrt_target "${this_script}" "$PREV"
127	#
128	# If $pkg_tarball isn't empty, we've got a package...
129	#
130	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
131	#
132	LUSER_wrt_RunAsUser "${file}"
133	#
134	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
135	#
136	# Include a touch of the target name so make can check if it's already been made.
137	wrt_touch
138	#
139	#--------------------------------------------------------------------#
140	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
141	#--------------------------------------------------------------------#
142	#
143	# Keep the script file name for Makefile dependencies.
144	PREV=$this_script
145
146	done # for file in ....
147	}
148
149	#--------------------------------------#
150	temptools_Makefiles() { #
151	#--------------------------------------#
152	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
153
154	for file in temp-system/* ; do
155	# Keep the script file name
156	this_script=`basename $file`
157	#
158	# Deal with any odd scripts..
159	case $this_script in
160	*choose) # The choose script will fail if you cannot enter the new environment
161	# If the 'boot' build method was chosen don't run the script
162	[[ $METHOD = "boot" ]] && continue; ;;
163	*) ;;
164	esac
165
166	#
167	# First append each name of the script files to a list (this will become
168	# the names of the targets in the Makefile
169	temptools="$temptools $this_script"
170
171	#
172	# Grab the name of the target, strip id number, XXX-script
173	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
174	#
175	pkg_tarball=$(get_package_tarball_name $name)
176
177	#--------------------------------------------------------------------#
178	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
179	#--------------------------------------------------------------------#
180	#
181	# Drop in the name of the target on a new line, and the previous target
182	# as a dependency. Also call the echo_message function.
183	LUSER_wrt_target "${this_script}" "$PREV"
184	#
185	# If $pkg_tarball isn't empty, we've got a package...
186	# Insert instructions for unpacking the package and to set the PKGDIR variable.
187	#
188	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
189	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
190	#
191	LUSER_wrt_RunAsUser "${file}"
192	#
193	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
194	#
195	# Include a touch of the target name so make can check if it's already been made.
196	wrt_touch
197	#
198	#--------------------------------------------------------------------#
199	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
200	#--------------------------------------------------------------------#
201	#
202	# Keep the script file name for Makefile dependencies.
203	PREV=$this_script
204	done # for file in ....
205	}
206
207
208	#--------------------------------------#
209	chroot_Makefiles() { #
210	#--------------------------------------#
211	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
212
213	for file in chroot/* ; do
214	# Keep the script file name
215	this_script=`basename $file`
216	#
217	# Skipping scripts is done now and not included in the build tree.
218	case $this_script in
219	chroot) continue ;;
220	esac
221
222	#
223	# First append each name of the script files to a list (this will become
224	# the names of the targets in the Makefile
225	case "${this_script}" in
226	*util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
227	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
228	*) chroottools="$chroottools $this_script" ;;
229	esac
230
231	# Grab the name of the target, strip id number, XXX-script
232	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
233
234	pkg_tarball=$(get_package_tarball_name $name)
235
236	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
237	# .. Customized makefile entry
238	case "${this_script}" in
239	*util-linux)
240	LUSER_wrt_target "${this_script}" "$PREV"
241	LUSER_wrt_unpack "$pkg_tarball"
242	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
243	LUSER_wrt_RunAsUser "${file}"
244	LUSER_RemoveBuildDirs "${name}"
245	wrt_touch
246	temptools="$temptools $this_script"
247	continue ;;
248	esac
249
250
251	#--------------------------------------------------------------------#
252	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
253	#--------------------------------------------------------------------#
254	#
255	# Drop in the name of the target on a new line, and the previous target
256	# as a dependency. Also call the echo_message function.
257	CHROOT_wrt_target "${this_script}" "$PREV"
258	#
259	# If $pkg_tarball isn't empty, we've got a package...
260	# Insert instructions for unpacking the package and changing directories
261	#
262	if [ "$pkg_tarball" != "" ] ; then
263	CHROOT_Unpack "$pkg_tarball"
264	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
265	fi
266	#
267	# Select a script execution method
268	case $this_script in
269	*kernfs) wrt_RunAsRoot "${file}" ;;
270	*) CHROOT_wrt_RunAsRoot "${file}" ;;
271	esac
272	#
273	# Housekeeping...remove the build directory(ies), except if the package build fails.
274	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
275	#
276	# Include a touch of the target name so make can check if it's already been made.
277	wrt_touch
278	#
279	#--------------------------------------------------------------------#
280	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
281	#--------------------------------------------------------------------#
282	#
283	# Keep the script file name for Makefile dependencies.
284	PREV=$this_script
285
286	done # for file in...
287	}
288
289
290	#--------------------------------------#
291	boot_Makefiles() { #
292	#--------------------------------------#
293
294	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
295	#
296	# Create a target bootable partition containing a compile environment. Later
297	# on we boot into this environment and contine the build.
298	#
299	for file in boot/* ; do
300	# Keep the script file name
301	this_script=`basename $file`
302
303	# A little housekeeping on the scripts
304	case $this_script in
305	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
306	whatnext) continue ;;
307	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
308	*kernel) # if there is no kernel config file do not build the kernel
309	[[ -z $CONFIG ]] && continue
310	# Copy the config file to /sources with a standardized name
311	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
312	;;
313	esac
314	#
315	# First append each name of the script files to a list (this will become
316	# the names of the targets in the Makefile
317	case "${this_script}" in
318	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
319	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
320	*) boottools="$boottools $this_script" ;;
321	esac
322	#
323	# Grab the name of the target, strip id number and misc words.
324	case $this_script in
325	*kernel) name=linux ;;
326	*bootscripts) name="bootscripts-cross-lfs" ;;
327	*udev-rules) name="udev-cross-lfs" ;;
328	*grub-build) name=grub ;;
329	*-aboot-build) name=aboot ;;
330	*yaboot-build) name=yaboot ;;
331	*colo-build) name=colo ;;
332	*silo-build) name=silo ;;
333	*arcload-build) name=arcload ;;
334	*lilo-build) name=lilo ;;
335	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
336	esac
337	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
338	pkg_tarball=$(get_package_tarball_name $name)
339
340	#--------------------------------------------------------------------#
341	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
342	#--------------------------------------------------------------------#
343	#
344	# Drop in the name of the target on a new line, and the previous target
345	# as a dependency. Also call the echo_message function.
346	LUSER_wrt_target "${this_script}" "$PREV"
347	#
348	# If $pkg_tarball isn't empty, we've got a package...
349	# Insert instructions for unpacking the package and changing directories
350	#
351	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
352	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
353	#
354	# Select a script execution method
355	case $this_script in
356	# The following 2 scripts are defined in the /boot directory but need
357	# to be run as a root user. Set them up here but run them in another phase
358	changingowner) wrt_RunAsRoot "${file}" ;;
359	devices) wrt_RunAsRoot "${file}" ;;
360	fstab) if [[ -n "$FSTAB" ]]; then
361	LUSER_wrt_CopyFstab
362	else
363	LUSER_wrt_RunAsUser "${file}"
364	fi
365	;;
366	*) LUSER_wrt_RunAsUser "${file}" ;;
367	esac
368	#
369	# Housekeeping...remove any build directory(ies) except if the package build fails.
370	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
371	#
372	# Include a touch of the target name so make can check if it's already been made.
373	wrt_touch
374	#
375	#--------------------------------------------------------------------#
376	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
377	#--------------------------------------------------------------------#
378	#
379	# Keep the script file name for Makefile dependencies.
380	PREV=$this_script
381
382	done
383	}
384
385
386	#--------------------------------------#
387	testsuite_tools_Makefiles() { #
388	#--------------------------------------#
389
390	if [[ "${METHOD}" = "chroot" ]]; then
391	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
392	else
393	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
394	PREV=""
395	fi
396
397	for file in testsuite-tools/* ; do
398	# Keep the script file name
399	this_script=`basename $file`
400
401	# First append each name of the script files to a list (this will become
402	# the names of the targets in the Makefile
403	testsuitetools="$testsuitetools $this_script"
404
405	# Grab the name of the target, strip id number, XXX-script
406	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
407	-e 's@-64bit@@' \
408	-e 's@-64@@' \
409	-e 's@64@@' \
410	-e 's@n32@@'`
411
412	pkg_tarball=$(get_package_tarball_name $name)
413
414	#--------------------------------------------------------------------#
415	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
416	#--------------------------------------------------------------------#
417	#
418	# Drop in the name of the target on a new line, and the previous target
419	# as a dependency. Also call the echo_message function.
420	CHROOT_wrt_target "${this_script}" "$PREV"
421	#
422	CHROOT_Unpack "$pkg_tarball"
423	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
424	#
425	CHROOT_wrt_RunAsRoot "${file}"
426	#
427	CHROOT_wrt_RemoveBuildDirs "${name}"
428	#
429	# Include a touch of the target name so make can check if it's already been made.
430	wrt_touch
431	#
432	#--------------------------------------------------------------------#
433	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
434	#--------------------------------------------------------------------#
435	#
436	# Keep the script file name for Makefile dependencies.
437	PREV=$this_script
438
439	done
440	}
441
442
443	#--------------------------------------#
444	final_system_Makefiles() { #
445	#--------------------------------------#
446	# Set envars and scripts for iteration targets
447	if [[ -z "$1" ]] ; then
448	local N=""
449	# In boot method the makesys phase was initiated in testsuite_tools_makefile
450	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
451	else
452	local N=-build_$1
453	local basicsystem=""
454	mkdir final-system$N
455	cp final-system/* final-system$N
456	for script in final-system$N/* ; do
457	# Overwrite existing symlinks, files, and dirs
458	sed -e 's/ln -sv/&f/g' \
459	-e 's/mv -v/&f/g' \
460	-e 's/mkdir -v/&p/g' -i ${script}
461	# Rename the scripts
462	mv ${script} ${script}$N
463	done
464	# Remove Bzip2 binaries before make install
465	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
466	# Delete *old Readline libraries just after make install
467	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
468	fi
469
470	if [[ "${METHOD}" = "chroot" ]]; then
471	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
472	else
473	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
474	fi
475
476	for file in final-system$N/* ; do
477	# Keep the script file name
478	this_script=`basename $file`
479
480	# Test if the stripping phase must be skipped.
481	# Skip alsp temp-perl for iterative runs
482	case $this_script in
483	stripping) [[ "$STRIP" = "n" ]] && continue ;;
484	temp-perl) [[ -n "$N" ]] && continue ;;
485	esac
486
487	# Grab the name of the target, strip id number, XXX-script
488	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
489	-e 's@temp-@@' \
490	-e 's@-64bit@@' \
491	-e 's@-64@@' \
492	-e 's@64@@' \
493	-e 's@n32@@' \
494	-e 's,'$N',,'`
495
496	# Find the version of the command files, if it corresponds with the building of
497	# a specific package. We need this here to can skip scripts not needed for
498	# iterations rebuilds
499	pkg_tarball=$(get_package_tarball_name $name)
500
501	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
502	case "${this_script}" in
503	stripping) ;;
504	*) continue ;;
505	esac
506	fi
507
508	# Append each name of the script files to a list (this will become
509	# the names of the targets in the Makefile
510	basicsystem="$basicsystem ${this_script}"
511
512	#--------------------------------------------------------------------#
513	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
514	#--------------------------------------------------------------------#
515	#
516	# Drop in the name of the target on a new line, and the previous target
517	# as a dependency. Also call the echo_message function.
518	CHROOT_wrt_target "${this_script}" "$PREV"
519
520	# If $pkg_tarball isn't empty, we've got a package...
521	if [ "$pkg_tarball" != "" ] ; then
522	CHROOT_Unpack "$pkg_tarball"
523	# If the testsuites must be run, initialize the log file
524	case $name in
525	binutils \| gcc \| glibc )
526	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
527	;;
528	* )
529	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
530	;;
531	esac
532	# If using optimizations, write the instructions
533	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
534	fi
535	#
536	CHROOT_wrt_RunAsRoot "${file}"
537	#
538	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
539	#
540	# Include a touch of the target name so make can check if it's already been made.
541	wrt_touch
542	#
543	#--------------------------------------------------------------------#
544	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
545	#--------------------------------------------------------------------#
546	#
547	# Keep the script file name for Makefile dependencies.
548	PREV=${this_script}
549	# Set system_build envar for iteration targets
550	system_build=$basicsystem
551	done # for file in final-system/* ...
552	}
553
554	#--------------------------------------#
555	bootscripts_Makefiles() { #
556	#--------------------------------------#
557
558	if [[ "${METHOD}" = "chroot" ]]; then
559	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
560	else
561	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
562	fi
563
564	for file in bootscripts/* ; do
565	# Keep the script file name
566	this_script=`basename $file`
567
568	case $this_script in
569	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
570	console) continue ;; # Use the files that came with the bootscripts
571	*) ;;
572	esac
573
574	# First append each name of the script files to a list (this will become
575	# the names of the targets in the Makefile
576	bootscripttools="$bootscripttools $this_script"
577
578	# Grab the name of the target, strip id number, XXX-script
579	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
580	-e 's@-64bit@@' \
581	-e 's@-64@@' \
582	-e 's@64@@' \
583	-e 's@n32@@'`
584	case $name in
585	bootscripts) name=bootscripts-cross-lfs ;;
586	*udev-rules) name=udev-cross-lfs ;;
587	esac
588
589	pkg_tarball=$(get_package_tarball_name $name)
590
591	#--------------------------------------------------------------------#
592	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
593	#--------------------------------------------------------------------#
594	#
595	# Drop in the name of the target on a new line, and the previous target
596	# as a dependency. Also call the echo_message function.
597	CHROOT_wrt_target "${this_script}" "$PREV"
598	#
599	# If $pkg_tarball isn't empty, we've got a package...
600	#
601	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
602	#
603	CHROOT_wrt_RunAsRoot "${file}"
604	#
605	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
606	#
607	# Include a touch of the target name so make can check if it's already been made.
608	wrt_touch
609	#
610	#--------------------------------------------------------------------#
611	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
612	#--------------------------------------------------------------------#
613	#
614	# Keep the script file name for Makefile dependencies.
615	PREV=$this_script
616
617	done # for file in bootscripts/* ...
618	}
619
620	#--------------------------------------#
621	bootable_Makefiles() { #
622	#--------------------------------------#
623
624	if [[ "${METHOD}" = "chroot" ]]; then
625	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
626	else
627	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
628	fi
629
630
631	for file in {bootable,the-end}/* ; do
632	# Keep the script file name
633	this_script=`basename $file`
634
635	# A little housekeeping on the scripts
636	case $this_script in
637	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
638	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
639	*kernel) # if there is no kernel config file do not build the kernel
640	[[ -z $CONFIG ]] && continue
641	# Copy the config file to /sources with a standardized name
642	cp $CONFIG $BUILDDIR/sources/kernel-config
643	;;
644	esac
645	#
646	# First append each name of the script files to a list (this will become
647	# the names of the targets in the Makefile
648	bootabletools="$bootabletools $this_script"
649	#
650	# Grab the name of the target, strip id number and misc words.
651	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
652	case $this_script in
653	kernel) name=linux
654	;;
655	esac
656
657	pkg_tarball=$(get_package_tarball_name $name)
658
659	#--------------------------------------------------------------------#
660	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
661	#--------------------------------------------------------------------#
662	#
663	# Drop in the name of the target on a new line, and the previous target
664	# as a dependency. Also call the echo_message function.
665	CHROOT_wrt_target "${this_script}" "$PREV"
666	#
667	# If $pkg_tarball isn't empty, we've got a package...
668	# Insert instructions for unpacking the package and changing directories
669	#
670	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
671	#
672	# Select a script execution method
673	case $this_script in
674	fstab) if [[ -n "$FSTAB" ]]; then
675	CHROOT_wrt_CopyFstab
676	else
677	CHROOT_wrt_RunAsRoot "${file}"
678	fi
679	;;
680	*) CHROOT_wrt_RunAsRoot "${file}"
681	;;
682	esac
683	#
684	# Housekeeping...remove any build directory(ies) except if the package build fails.
685	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
686	#
687	# Include a touch of the target name so make can check if it's already been made.
688	wrt_touch
689	#
690	#--------------------------------------------------------------------#
691	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
692	#--------------------------------------------------------------------#
693	#
694	# Keep the script file name for Makefile dependencies.
695	PREV=$this_script
696
697	done
698
699	}
700
701
702	#--------------------------------------#
703	build_Makefile() { # Construct a Makefile from the book scripts
704	#--------------------------------------#
705	#
706	# Script crashes if error trapping is on
707	#
708	set +e
709	declare -f method_cmds
710	set -e
711
712	echo "...Creating Makefile... ${BOLD}START${OFF}"
713
714	cd $JHALFSDIR/${PROGNAME}-commands
715	# Start with a clean files
716	>$MKFILE
717	>$MKFILE.tmp
718
719	method_cmds=${METHOD}_Makefiles
720
721	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
722	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
723	temptools_Makefiles # mk_TEMP (LUSER) $temptools
724	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
725	if [[ ! $TEST = "0" ]]; then
726	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
727	fi
728	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
729	# Add the iterations targets, if needed
730	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
731	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
732	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
733
734	# Add the BLFS_TOOL targets, if needed
735	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
736
737	# Add a header, some variables and include the function file
738	# to the top of the real Makefile.
739	wrt_Makefile_header
740
741	# Add chroot commands
742	if [ "$METHOD" = "chroot" ] ; then
743	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
744	chroot=`cat chroot/chroot \| \
745	sed -e "s@chroot@$CHROOT_LOC@" \
746	-e '/#!\/tools\/bin\/bash/d' \
747	-e '/^export/d' \
748	-e '/^logout/d' \
749	-e 's@ \\\@ @g' \| \
750	tr -d '\n' \| \
751	sed -e 's/ */ /g' \
752	-e 's\|\\$\|&&\|g' \
753	-e 's\|exit\|\|g' \
754	-e 's\|$\| -c\|' \
755	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
756	-e 's\|set -e\|\|' \
757	-e 's\|set +h\|\|'`
758	echo -e "CHROOT1= $chroot\n" >> $MKFILE
759	fi
760
761	################## CHROOT ####################
762
763	if [[ "${METHOD}" = "chroot" ]]; then
764	(
765	cat << EOF
766
767	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_BLFS_TOOL
768	@sudo make do-housekeeping
769	@\$(call echo_finished,$VERSION)
770
771	ck_UID:
772	@if [ \`id -u\` = "0" ]; then \\
773	echo "+--------------------------------------------------+"; \\
774	echo "\|You cannot run this makefile from the root account\|"; \\
775	echo "+--------------------------------------------------+"; \\
776	exit 1; \\
777	fi
778
779	#---------------AS ROOT
780	mk_SETUP:
781	@\$(call echo_SU_request)
782	@sudo make SHELL=/bin/bash SETUP
783	@touch \$@
784
785	#---------------AS LUSER
786	mk_CROSS: mk_SETUP
787	@\$(call echo_PHASE,Cross and Temporary Tools)
788	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
789	@sudo make restore-luser-env
790	@touch \$@
791
792	mk_SUDO: mk_CROSS
793	@sudo make SHELL=/bin/bash SUDO
794	@touch \$@
795	#
796	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
797	# chroot environment. (Unless someone knows a different way)
798	# Manually create the /bin directory and provide link to the /tools dir.
799	# Also change the original symlink creation to include (f)orce to prevent failure due to
800	# pre-existing links.
801
802	#---------------CHROOT JAIL
803	mk_SYSTOOLS: mk_SUDO
804	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
805	mkdir \$(MOUNT_PT)/bin; \\
806	cd \$(MOUNT_PT)/bin && \\
807	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
808	sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
809	fi;
810	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/*-createfiles
811	@\$(call echo_CHROOT_request)
812	@\$(call echo_PHASE, CHROOT JAIL )
813	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
814	@touch \$@
815
816	mk_BLFS_TOOL: create-sbu_du-report
817	@\$(call echo_PHASE,Building BLFS-TOOLS)
818	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
819	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
820	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
821	fi;
822	@touch \$@
823
824	SETUP: $host_prep
825	AS_LUSER: $cross_tools $temptools
826	SUDO: $orphan_scripts
827	CHROOT_JAIL: ${chroottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
828	BLFS_TOOL: $blfs_tool
829
830
831	create-sbu_du-report: mk_SYSTOOLS
832	@\$(call echo_message, Building)
833	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
834	./create-sbu_du-report.sh logs $VERSION; \\
835	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
836	fi;
837	@touch \$@
838
839	do-housekeeping:
840	@-umount \$(MOUNT_PT)/dev/pts
841	@-umount \$(MOUNT_PT)/dev/shm
842	@-umount \$(MOUNT_PT)/dev
843	@-umount \$(MOUNT_PT)/sys
844	@-umount \$(MOUNT_PT)/proc
845	@-rm /tools /cross-tools
846	@-if [ ! -f luser-exist ]; then \\
847	userdel \$(LUSER); \\
848	rm -rf /home/\$(LUSER); \\
849	fi;
850
851	EOF
852	) >> $MKFILE
853
854	fi
855
856	################### BOOT #####################
857
858	if [[ "${METHOD}" = "boot" ]]; then
859	(
860	cat << EOF
861
862	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
863	@sudo make restore-luser-env
864	@sudo make do-housekeeping
865	@\$(call echo_boot_finished,$VERSION)
866
867	makesys: mk_FINAL mk_BLFS_TOOL
868	@\$(call echo_finished,$VERSION)
869
870
871	ck_UID:
872	@if [ \`id -u\` = "0" ]; then \\
873	echo "+--------------------------------------------------+"; \\
874	echo "\|You cannot run this makefile from the root account\|"; \\
875	echo "\|However, if this is the boot environment \|"; \\
876	echo "\| the command you are looking for is \|"; \\
877	echo "\| make makesys \|"; \\
878	echo "\| to finish off the build \|"; \\
879	echo "+--------------------------------------------------+"; \\
880	exit 1; \\
881	fi
882
883	#---------------AS ROOT
884
885	mk_SETUP:
886	@\$(call echo_SU_request)
887	@sudo make SHELL=/bin/bash SETUP
888	@touch \$@
889
890	#---------------AS LUSER
891
892	mk_CROSS: mk_SETUP
893	@\$(call echo_PHASE,Cross Tool)
894	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
895	@touch \$@
896
897	mk_SUDO: mk_CROSS
898	@sudo make SHELL=/bin/bash SUDO
899	@touch \$@
900
901	#---------------AS ROOT
902
903	mk_FINAL:
904	@\$(call echo_PHASE,Final System)
905	@( source /root/.bash_profile && make AS_ROOT )
906	@touch \$@
907
908	mk_BLFS_TOOL: mk_FINAL
909	@\$(call echo_PHASE,Building BLFS-TOOLS)
910	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
911	mkdir -p $TRACKING_DIR; \\
912	( make BLFS_TOOL ); \\
913	fi
914	@touch \$@
915
916	SETUP: $host_prep
917	AS_LUSER: $cross_tools $temptools ${boottools}
918	SUDO: $orphan_scripts
919	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
920	BLFS_TOOL: $blfs_tool
921
922	do-housekeeping:
923	@-rm /tools /cross-tools
924	@-if [ ! -f luser-exist ]; then \\
925	userdel \$(LUSER); \\
926	rm -rf /home/\$(LUSER); \\
927	fi;
928
929	EOF
930	) >> $MKFILE
931	fi
932
933	(
934	cat << EOF
935
936	restore-luser-env:
937	@\$(call echo_message, Building)
938	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
939	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
940	fi;
941	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
942	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
943	fi;
944	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
945	touch \$@ && \\
946	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
947	echo --------------------------------------------------------------------------------\$(WHITE)
948
949	########################################################
950
951
952	EOF
953	) >> $MKFILE
954
955	# Bring over the items from the Makefile.tmp
956	cat $MKFILE.tmp >> $MKFILE
957	rm $MKFILE.tmp
958
959	echo "Creating Makefile... ${BOLD}DONE${OFF}"
960	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: