Context Navigation

source: CLFS/master.sh@ ba57e61

2.4 ablfs-more legacy new_features trunk

Last change on this file since ba57e61 was 179ae85, checked in by Pierre Labastie <pierre@…>, 11 years ago
Adapt instructions to new layout for "boot" method, while keeping compatibility with older layouts. Joint work with W. Harrington
Property mode set to `100644`
File size: 41.7 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@install -dv \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@install -dv \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
38	mkdir -pv \$(LUSER_HOME); \\
39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
40	else \\
41	touch luser-exist; \\
42	fi
43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
46	chmod a+wt \$(SRCSDIR)
47	@\$(call housekeeping)
48
49	026-settingenvironment: 025-addinguser
50	@\$(call echo_message, Building)
51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
53	fi
54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
56	fi;
57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
67	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
68	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
69	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
70	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
71	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
72	chmod a+wt \$(MOUNT_PT) && \\
73	if [ -d \$(MOUNT_PT)/var ]; then \\
74	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
75	fi && \\
76	touch envars && \\
77	chown \$(LUSER):\$(LGROUP) envars
78	@\$(call housekeeping)
79	EOF
80	) >> $MKFILE.tmp
81	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
82
83	}
84
85	#--------------------------------------#
86	cross_tools_Makefiles() { #
87	#--------------------------------------#
88	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
89
90	for file in cross-tools/* ; do
91	# Keep the script file name
92	this_script=`basename $file`
93	#
94	# Skip this script...
95	case $this_script in
96	cflags \| variables ) # work done in host_prep_Makefiles
97	continue; ;;
98	*) ;;
99	esac
100	#
101	# Set the dependency for the first target.
102	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
103
104	# First append each name of the script files to a list (this will become
105	# the names of the targets in the Makefile
106	cross_tools="$cross_tools $this_script"
107
108	# Grab the name of the target (minus the -headers or -cross in the case of gcc
109	# and binutils in chapter 5)
110	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
111	-e 's@-static@@' \
112	-e 's@-final@@' \
113	-e 's@-64@@' \
114	-e 's@-n32@@'`
115	pkg_tarball=$(get_package_tarball_name $name)
116
117	#--------------------------------------------------------------------#
118	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
119	#--------------------------------------------------------------------#
120	#
121	# Drop in the name of the target on a new line, and the previous target
122	# as a dependency. Also call the echo_message function.
123	LUSER_wrt_target "${this_script}" "$PREV"
124	#
125	# If $pkg_tarball isn't empty, we've got a package...
126	#
127	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
128	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
129	#
130	LUSER_wrt_RunAsUser "${file}"
131	#
132	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
133	#
134	# Include a touch of the target name so make can check if it's already been made.
135	wrt_touch
136	#
137	#--------------------------------------------------------------------#
138	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
139	#--------------------------------------------------------------------#
140	#
141	# Keep the script file name for Makefile dependencies.
142	PREV=$this_script
143
144	done # for file in ....
145	}
146
147	#--------------------------------------#
148	temptools_Makefiles() { #
149	#--------------------------------------#
150	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
151
152	for file in temp-system/* ; do
153	# Keep the script file name
154	this_script=`basename $file`
155	#
156	# Deal with any odd scripts..
157	case $this_script in
158	*choose) # The choose script will fail if you cannot enter the new environment
159	# If the 'boot' build method was chosen don't run the script
160	[[ $METHOD = "boot" ]] && continue; ;;
161	*) ;;
162	esac
163
164	#
165	# First append each name of the script files to a list (this will become
166	# the names of the targets in the Makefile
167	temptools="$temptools $this_script"
168
169	#
170	# Grab the name of the target, strip id number, XXX-script
171	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
172	#
173	pkg_tarball=$(get_package_tarball_name $name)
174
175	#--------------------------------------------------------------------#
176	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
177	#--------------------------------------------------------------------#
178	#
179	# Drop in the name of the target on a new line, and the previous target
180	# as a dependency. Also call the echo_message function.
181	LUSER_wrt_target "${this_script}" "$PREV"
182	#
183	# If $pkg_tarball isn't empty, we've got a package...
184	# Insert instructions for unpacking the package and to set the PKGDIR variable.
185	#
186	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
187	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
188	#
189	LUSER_wrt_RunAsUser "${file}"
190	#
191	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
192	#
193	# Include a touch of the target name so make can check if it's already been made.
194	wrt_touch
195	#
196	#--------------------------------------------------------------------#
197	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
198	#--------------------------------------------------------------------#
199	#
200	# Keep the script file name for Makefile dependencies.
201	PREV=$this_script
202	done # for file in ....
203	}
204
205
206	#--------------------------------------#
207	chroot_Makefiles() { #
208	#--------------------------------------#
209	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
210
211	for file in chroot/* ; do
212	# Keep the script file name
213	this_script=`basename $file`
214	#
215	# Skipping scripts is done now and not included in the build tree.
216	case $this_script in
217	chroot) continue ;;
218	esac
219
220	#
221	# First append each name of the script files to a list (this will become
222	# the names of the targets in the Makefile
223	case "${this_script}" in
224	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
225	*) chroottools="$chroottools $this_script" ;;
226	esac
227
228	# Grab the name of the target, strip id number, XXX-script
229	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
230
231	pkg_tarball=$(get_package_tarball_name $name)
232
233	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
234	# Same for e2fsprogs (in CLFS 1.1.0)
235	# .. Customized makefile entry
236	case "${this_script}" in
237	*util-linux)
238	LUSER_wrt_target "${this_script}" "$PREV"
239	LUSER_wrt_unpack "$pkg_tarball"
240	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
241	LUSER_wrt_RunAsUser "${file}"
242	LUSER_RemoveBuildDirs "${name}"
243	wrt_touch
244	temptools="$temptools $this_script"
245	continue ;;
246	*util-linux-ng)
247	LUSER_wrt_target "${this_script}" "$PREV"
248	LUSER_wrt_unpack "$pkg_tarball"
249	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
250	LUSER_wrt_RunAsUser "${file}"
251	LUSER_RemoveBuildDirs "${name}"
252	wrt_touch
253	temptools="$temptools $this_script"
254	continue ;;
255	*util-linux-libs)
256	LUSER_wrt_target "${this_script}" "$PREV"
257	LUSER_wrt_unpack "$pkg_tarball"
258	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
259	LUSER_wrt_RunAsUser "${file}"
260	LUSER_RemoveBuildDirs "${name}"
261	wrt_touch
262	temptools="$temptools $this_script"
263	continue ;;
264	*e2fsprogs)
265	LUSER_wrt_target "${this_script}" "$PREV"
266	LUSER_wrt_unpack "$pkg_tarball"
267	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
268	LUSER_wrt_RunAsUser "${file}"
269	LUSER_RemoveBuildDirs "${name}"
270	wrt_touch
271	temptools="$temptools $this_script"
272	continue ;;
273	*e2fsprogs-libs)
274	LUSER_wrt_target "${this_script}" "$PREV"
275	LUSER_wrt_unpack "$pkg_tarball"
276	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
277	LUSER_wrt_RunAsUser "${file}"
278	LUSER_RemoveBuildDirs "${name}"
279	wrt_touch
280	temptools="$temptools $this_script"
281	continue ;;
282	esac
283
284
285	#--------------------------------------------------------------------#
286	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
287	#--------------------------------------------------------------------#
288	#
289	# Drop in the name of the target on a new line, and the previous target
290	# as a dependency. Also call the echo_message function.
291	CHROOT_wrt_target "${this_script}" "$PREV"
292	#
293	# If $pkg_tarball isn't empty, we've got a package...
294	# Insert instructions for unpacking the package and changing directories
295	#
296	if [ "$pkg_tarball" != "" ] ; then
297	CHROOT_Unpack "$pkg_tarball"
298	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
299	fi
300	#
301	# Select a script execution method
302	case $this_script in
303	*kernfs) wrt_RunAsRoot "${file}" ;;
304	*) CHROOT_wrt_RunAsRoot "${file}" ;;
305	esac
306	#
307	# Housekeeping...remove the build directory(ies), except if the package build fails.
308	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
309	#
310	# Include a touch of the target name so make can check if it's already been made.
311	wrt_touch
312	#
313	#--------------------------------------------------------------------#
314	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
315	#--------------------------------------------------------------------#
316	#
317	# Keep the script file name for Makefile dependencies.
318	PREV=$this_script
319
320	done # for file in...
321	}
322
323
324	#--------------------------------------#
325	boot_Makefiles() { #
326	#--------------------------------------#
327
328	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
329	#
330	# Create a target bootable partition containing a compile environment. Later
331	# on we boot into this environment and contine the build.
332	#
333	for file in boot/* ; do
334	# Keep the script file name
335	this_script=`basename $file`
336
337	# A little housekeeping on the scripts
338	case $this_script in
339	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
340	how-to-view) continue ;;
341	whatnext) continue ;;
342	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
343	*kernel) # if there is no kernel config file do not build the kernel
344	[[ -z $CONFIG ]] && continue
345	# Copy the config file to /sources with a standardized name
346	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
347	;;
348	esac
349	#
350	# First append each name of the script files to a list (this will become
351	# the names of the targets in the Makefile). Those names differ depending
352	# on the version of the book. What makes the difference between those
353	# versions is the presence of "how-to-view" in the boot chapter.
354	if [ -f boot/*how-to-view ]; then
355	case "${this_script}" in
356	*changingowner)
357	orphan_scripts="${orphan_scripts} ${this_script}"
358	;;
359	*creatingdirs)
360	orphan_scripts="${orphan_scripts} ${this_script}"
361	;;
362	*createfiles)
363	orphan_scripts="${orphan_scripts} ${this_script}"
364	;;
365	*devices)
366	orphan_scripts="${orphan_scripts} ${this_script}"
367	;;
368	*flags)
369	orphan_scripts="${orphan_scripts} ${this_script}"
370	;;
371	*fstab)
372	orphan_scripts="${orphan_scripts} ${this_script}"
373	;;
374	*pwdgroup)
375	orphan_scripts="${orphan_scripts} ${this_script}"
376	;;
377	*settingenvironment)
378	orphan_scripts="${orphan_scripts} ${this_script}"
379	;;
380	*)
381	boottools="$boottools $this_script"
382	;;
383	esac
384	else
385	case "${this_script}" in
386	*changingowner)
387	orphan_scripts="${orphan_scripts} ${this_script}"
388	;;
389	*devices)
390	orphan_scripts="${orphan_scripts} ${this_script}"
391	;;
392	*)
393	boottools="$boottools $this_script"
394	;;
395	esac
396	fi
397	#
398	# Grab the name of the target, strip id number and misc words.
399	case $this_script in
400	*kernel) name=linux ;;
401	*bootscripts) name="bootscripts-cross-lfs" ;;
402	*boot-scripts) name="boot-scripts-cross-lfs" ;;
403	*udev-rules) name="udev-cross-lfs" ;;
404	*grub-build) name=grub ;;
405	*-aboot-build) name=aboot ;;
406	*yaboot-build) name=yaboot ;;
407	*colo-build) name=colo ;;
408	*silo-build) name=silo ;;
409	*arcload-build) name=arcload ;;
410	*lilo-build) name=lilo ;;
411	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
412	esac
413	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
414	pkg_tarball=$(get_package_tarball_name $name)
415
416	#--------------------------------------------------------------------#
417	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
418	#--------------------------------------------------------------------#
419	#
420	# Drop in the name of the target on a new line, and the previous target
421	# as a dependency. Also call the echo_message function.
422	LUSER_wrt_target "${this_script}" "$PREV"
423	#
424	# If $pkg_tarball isn't empty, we've got a package...
425	# Insert instructions for unpacking the package and changing directories
426	#
427	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
428	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
429	#
430	# Select a script execution method
431	if [ -f boot/*how-to-view ]; then
432	case $this_script in
433	# The following 8 scripts are defined in the /boot directory but need
434	# to be run as a root user. Set them up here but run them in another
435	# phase
436	*changingowner) wrt_RunAsRoot "${file}" ;;
437	*creatingdirs) wrt_RunAsRoot "${file}" ;;
438	*createfiles) wrt_RunAsRoot "${file}" ;;
439	*devices) wrt_RunAsRoot "${file}" ;;
440	*flags) wrt_RunAsRoot "${file}" ;;
441	*fstab)
442	if [[ -n "$FSTAB" ]]; then
443	LUSER_wrt_CopyFstab
444	else
445	wrt_RunAsRoot "${file}"
446	fi
447	;;
448	*pwdgroup) wrt_RunAsRoot "${file}" ;;
449	*settingenvironment) wrt_RunAsRoot "${file}" ;;
450	*) LUSER_wrt_RunAsUser "${file}" ;;
451	esac
452	else
453	case $this_script in
454	# The following 2 scripts are defined in the /boot directory but need
455	# to be run as a root user. Set them up here but run them in another
456	# phase
457	*changingowner) wrt_RunAsRoot "${file}" ;;
458	*devices) wrt_RunAsRoot "${file}" ;;
459	*fstab)
460	if [[ -n "$FSTAB" ]]; then
461	LUSER_wrt_CopyFstab
462	else
463	LUSER_wrt_RunAsUser "${file}"
464	fi
465	;;
466	*) LUSER_wrt_RunAsUser "${file}" ;;
467	esac
468	fi
469	#
470	# Housekeeping...remove any build directory(ies) except if the package build fails.
471	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
472	#
473	# Include a touch of the target name so make can check if it's already been made.
474	wrt_touch
475	#
476	#--------------------------------------------------------------------#
477	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
478	#--------------------------------------------------------------------#
479	#
480	# Keep the script file name for Makefile dependencies.
481	PREV=$this_script
482
483	done
484	}
485
486
487	#--------------------------------------#
488	testsuite_tools_Makefiles() { #
489	#--------------------------------------#
490
491	if [[ "${METHOD}" = "chroot" ]]; then
492	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
493	else
494	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
495	PREV=""
496	fi
497
498	for file in testsuite-tools/* ; do
499	# Keep the script file name
500	this_script=`basename $file`
501
502	# First append each name of the script files to a list (this will become
503	# the names of the targets in the Makefile
504	testsuitetools="$testsuitetools $this_script"
505
506	# Grab the name of the target, strip id number, XXX-script
507	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
508	-e 's@-64bit@@' \
509	-e 's@-64@@' \
510	-e 's@64@@' \
511	-e 's@n32@@'`
512
513	pkg_tarball=$(get_package_tarball_name $name)
514
515	#--------------------------------------------------------------------#
516	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
517	#--------------------------------------------------------------------#
518	#
519	# Drop in the name of the target on a new line, and the previous target
520	# as a dependency. Also call the echo_message function.
521	CHROOT_wrt_target "${this_script}" "$PREV"
522	#
523	CHROOT_Unpack "$pkg_tarball"
524	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
525	#
526	CHROOT_wrt_RunAsRoot "${file}"
527	#
528	CHROOT_wrt_RemoveBuildDirs "${name}"
529	#
530	# Include a touch of the target name so make can check if it's already been made.
531	wrt_touch
532	#
533	#--------------------------------------------------------------------#
534	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
535	#--------------------------------------------------------------------#
536	#
537	# Keep the script file name for Makefile dependencies.
538	PREV=$this_script
539
540	done
541	}
542
543
544	#--------------------------------------#
545	final_system_Makefiles() { #
546	#--------------------------------------#
547	# Set envars and scripts for iteration targets
548	if [[ -z "$1" ]] ; then
549	local N=""
550	# In boot method the makesys phase was initiated in testsuite_tools_makefile
551	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
552	else
553	local N=-build_$1
554	local basicsystem=""
555	mkdir final-system$N
556	cp final-system/* final-system$N
557	for script in final-system$N/* ; do
558	# Overwrite existing symlinks, files, and dirs
559	sed -e 's/ln -sv/&f/g' \
560	-e 's/mv -v/&f/g' \
561	-e 's/mkdir -v/&p/g' -i ${script}
562	# Rename the scripts
563	mv ${script} ${script}$N
564	done
565	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
566	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
567	# Delete *old Readline libraries just after make install
568	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
569	fi
570
571	if [[ "${METHOD}" = "chroot" ]]; then
572	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
573	else
574	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
575	fi
576
577	for file in final-system$N/* ; do
578	# Keep the script file name
579	this_script=`basename $file`
580
581	# Test if the stripping phase must be skipped.
582	# Skip also temp-perl for iterative runs
583	case $this_script in
584	stripping) [[ "$STRIP" = "n" ]] && continue ;;
585	temp-perl) [[ -n "$N" ]] && continue ;;
586	esac
587
588	# Grab the name of the target, strip id number, XXX-script.
589	# name1 is partially stripped and should be used for logging files.
590	# name is completely stripped and is used for grabbing
591	# the package name.
592	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
593	-e 's,'$N',,'`
594	name=`echo $name1 \| sed -e 's@temp-@@' \
595	-e 's@-64bit@@' \
596	-e 's@-64@@' \
597	-e 's@64@@' \
598	-e 's@n32@@'`
599
600	# Find the version of the command files, if it corresponds with the building of
601	# a specific package. We need this here to can skip scripts not needed for
602	# iterations rebuilds
603	pkg_tarball=$(get_package_tarball_name $name)
604
605	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
606	case "${this_script}" in
607	stripping) ;;
608	*) continue ;;
609	esac
610	fi
611
612	# Append each name of the script files to a list (this will become
613	# the names of the targets in the Makefile
614	basicsystem="$basicsystem ${this_script}"
615
616	#--------------------------------------------------------------------#
617	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
618	#--------------------------------------------------------------------#
619	#
620	# Drop in the name of the target on a new line, and the previous target
621	# as a dependency. Also call the echo_message function.
622	CHROOT_wrt_target "${this_script}" "$PREV"
623
624	# If $pkg_tarball isn't empty, we've got a package...
625	if [ "$pkg_tarball" != "" ] ; then
626	# Touch timestamp file if installed files logs will be created.
627	# But only for the firt build when running iterative builds.
628	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
629	CHROOT_wrt_TouchTimestamp
630	fi
631	CHROOT_Unpack "$pkg_tarball"
632	# If the testsuites must be run, initialize the log file
633	case $name in
634	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
635	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
636	;;
637	* )
638	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
639	;;
640	esac
641	# If using optimizations, write the instructions
642	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
643	fi
644	#
645	CHROOT_wrt_RunAsRoot "${file}"
646	#
647	# Write installed files log and remove the build directory(ies)
648	# except if the package build fails.
649	if [ "$pkg_tarball" != "" ] ; then
650	CHROOT_wrt_RemoveBuildDirs "$name"
651	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
652	CHROOT_wrt_LogNewFiles "$name1"
653	fi
654	fi
655	#
656	# Include a touch of the target name so make can check
657	# if it's already been made.
658	wrt_touch
659	#
660	#--------------------------------------------------------------------#
661	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
662	#--------------------------------------------------------------------#
663	#
664	# Keep the script file name for Makefile dependencies.
665	PREV=${this_script}
666	# Set system_build envar for iteration targets
667	system_build=$basicsystem
668	done # for file in final-system/* ...
669	}
670
671	#--------------------------------------#
672	bootscripts_Makefiles() { #
673	#--------------------------------------#
674
675	# New versions of the book do not have bootscripts anymore
676	# (use systemd configuration files)
677	# Define a variable to be used for the right script directory to parse
678	if [ -d bootscripts ]; then
679	config="bootscripts"
680	else
681	config="system-config"
682	fi
683
684	if [[ "${METHOD}" = "chroot" ]]; then
685	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
686	else
687	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
688	fi
689
690	for file in $config/* ; do
691	# Keep the script file name
692	this_script=`basename $file`
693
694	case $this_script in
695	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
696	console) continue ;; # Use the files that came with the bootscripts
697	*) ;;
698	esac
699
700	# First append each name of the script files to a list (this will become
701	# the names of the targets in the Makefile
702	bootscripttools="$bootscripttools $this_script"
703
704	# Grab the name of the target, strip id number, XXX-script.
705	# name1 is partially stripped and should be used for logging files.
706	# name is completely stripped and is used for grabbing
707	# the package name.
708	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
709	name=`echo $name1 \| sed -e 's@-64bit@@' \
710	-e 's@-64@@' \
711	-e 's@64@@' \
712	-e 's@n32@@'`
713	case $name in
714	bootscripts) name=bootscripts-cross-lfs ;;
715	*udev-rules) name=udev-cross-lfs ;;
716	esac
717
718	pkg_tarball=$(get_package_tarball_name $name)
719
720	#--------------------------------------------------------------------#
721	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
722	#--------------------------------------------------------------------#
723	#
724	# Drop in the name of the target on a new line, and the previous target
725	# as a dependency. Also call the echo_message function.
726	CHROOT_wrt_target "${this_script}" "$PREV"
727	#
728	# If $pkg_tarball isn't empty, we've got a package...
729	#
730	if [ "$pkg_tarball" != "" ] ; then
731	if [ "${INSTALL_LOG}" = "y" ] ; then
732	CHROOT_wrt_TouchTimestamp
733	fi
734	CHROOT_Unpack "$pkg_tarball"
735	fi
736	#
737	CHROOT_wrt_RunAsRoot "${file}"
738	#
739	# Write installed files log and remove the build directory(ies)
740	# except if the package build fails.
741	if [ "$pkg_tarball" != "" ] ; then
742	CHROOT_wrt_RemoveBuildDirs "$name"
743	if [ "${INSTALL_LOG}" = "y" ] ; then
744	CHROOT_wrt_LogNewFiles "$name1"
745	fi
746	fi
747	#
748	# Include a touch of the target name so make can check if it's already been made.
749	wrt_touch
750	#
751	#--------------------------------------------------------------------#
752	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
753	#--------------------------------------------------------------------#
754	#
755	# Keep the script file name for Makefile dependencies.
756	PREV=$this_script
757
758	done # for file in bootscripts/* ...
759	}
760
761	#--------------------------------------#
762	network_Makefiles() { #
763	#--------------------------------------#
764
765	if [[ "${METHOD}" = "chroot" ]]; then
766	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
767	else
768	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
769	fi
770
771	for file in network/* ; do
772	# Keep the script file name
773	this_script=`basename $file`
774
775	case $this_script in
776	*choose) continue ;; # This is not a script but a commentary.
777	*dhcp) continue ;; # Assume static networking.
778	*dhcpcd) continue ;; # Assume static networking.
779	*) ;;
780	esac
781
782	# First append each name of the script files to a list (this will become
783	# the names of the targets in the Makefile
784	networktools="$networktools $this_script"
785
786	# Grab the name of the target, strip id number, XXX-script
787	# name1 is partially stripped and should be used for logging files.
788	# name is completely stripped and is used for grabbing
789	# the package name.
790	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
791	name=`echo $name1 \| sed -e 's@-64bit@@' \
792	-e 's@-64@@' \
793	-e 's@64@@' \
794	-e 's@n32@@'`
795	case $name in
796	network-scripts) name=clfs-network-scripts ;;
797	esac
798
799	pkg_tarball=$(get_package_tarball_name $name)
800
801	#--------------------------------------------------------------------#
802	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
803	#--------------------------------------------------------------------#
804	#
805	# Drop in the name of the target on a new line, and the previous target
806	# as a dependency. Also call the echo_message function.
807	CHROOT_wrt_target "${this_script}" "$PREV"
808	#
809	# If $pkg_tarball isn't empty, we've got a package...
810	#
811	if [ "$pkg_tarball" != "" ] ; then
812	if [ "${INSTALL_LOG}" = "y" ] ; then
813	CHROOT_wrt_TouchTimestamp
814	fi
815	CHROOT_Unpack "$pkg_tarball"
816	fi
817	#
818	CHROOT_wrt_RunAsRoot "${file}"
819	#
820	# Write installed files log and remove the build directory(ies)
821	# except if the package build fails.
822	if [ "$pkg_tarball" != "" ] ; then
823	CHROOT_wrt_RemoveBuildDirs "$name"
824	if [ "${INSTALL_LOG}" = "y" ] ; then
825	CHROOT_wrt_LogNewFiles "$name1"
826	fi
827	fi
828	#
829	# Include a touch of the target name so make can check if it's already been made.
830	wrt_touch
831	#
832	#--------------------------------------------------------------------#
833	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
834	#--------------------------------------------------------------------#
835	#
836	# Keep the script file name for Makefile dependencies.
837	PREV=$this_script
838
839	done # for file in network/* ...
840	}
841
842	#--------------------------------------#
843	bootable_Makefiles() { #
844	#--------------------------------------#
845
846	if [[ "${METHOD}" = "chroot" ]]; then
847	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
848	else
849	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
850	fi
851
852
853	for file in bootable/* ; do
854	# Keep the script file name
855	this_script=`basename $file`
856
857	# A little housekeeping on the scripts
858	case $this_script in
859	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
860	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
861	*kernel) # if there is no kernel config file do not build the kernel
862	[[ -z $CONFIG ]] && continue
863	# Copy the config file to /sources with a standardized name
864	cp $CONFIG $BUILDDIR/sources/kernel-config
865	;;
866	esac
867	#
868	# First append each name of the script files to a list (this will become
869	# the names of the targets in the Makefile
870	bootabletools="$bootabletools $this_script"
871	#
872	# Grab the name of the target, strip id number and misc words.
873	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
874	case $this_script in
875	kernel) name=linux
876	;;
877	esac
878
879	pkg_tarball=$(get_package_tarball_name $name)
880
881	#--------------------------------------------------------------------#
882	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
883	#--------------------------------------------------------------------#
884	#
885	# Drop in the name of the target on a new line, and the previous target
886	# as a dependency. Also call the echo_message function.
887	CHROOT_wrt_target "${this_script}" "$PREV"
888	#
889	# If $pkg_tarball isn't empty, we've got a package...
890	# Insert instructions for unpacking the package and changing directories
891	#
892	if [ "$pkg_tarball" != "" ] ; then
893	if [ "${INSTALL_LOG}" = "y" ] ; then
894	CHROOT_wrt_TouchTimestamp
895	fi
896	CHROOT_Unpack "$pkg_tarball"
897	fi
898	#
899	# Select a script execution method
900	case $this_script in
901	fstab) if [[ -n "$FSTAB" ]]; then
902	CHROOT_wrt_CopyFstab
903	else
904	CHROOT_wrt_RunAsRoot "${file}"
905	fi
906	;;
907	*) CHROOT_wrt_RunAsRoot "${file}"
908	;;
909	esac
910	#
911	# Write installed files log and remove the build directory(ies)
912	# except if the package build fails.
913	if [ "$pkg_tarball" != "" ] ; then
914	CHROOT_wrt_RemoveBuildDirs "$name"
915	if [ "${INSTALL_LOG}" = "y" ] ; then
916	CHROOT_wrt_LogNewFiles "$name"
917	fi
918	fi
919	#
920	# Include a touch of the target name so make can check if it's already been made.
921	wrt_touch
922	#
923	#--------------------------------------------------------------------#
924	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
925	#--------------------------------------------------------------------#
926	#
927	# Keep the script file name for Makefile dependencies.
928	PREV=$this_script
929
930	done
931
932	}
933
934
935	#--------------------------------------#
936	build_Makefile() { # Construct a Makefile from the book scripts
937	#--------------------------------------#
938
939	echo "...Creating Makefile... ${BOLD}START${OFF}"
940
941	cd $JHALFSDIR/${PROGNAME}-commands
942	# Start with clean files
943	>$MKFILE
944	>$MKFILE.tmp
945
946	method_cmds=${METHOD}_Makefiles
947
948	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
949	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
950	temptools_Makefiles # mk_TEMP (LUSER) $temptools
951	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
952	if [[ ! $TEST = "0" ]]; then
953	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
954	fi
955	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
956	# Add the iterations targets, if needed
957	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
958	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
959	if [ -d network ]; then
960	network_Makefiles # If present, process network setup.
961	fi
962	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
963
964	# Add the CUSTOM_TOOLS targets, if needed
965	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
966
967	# Add a header, some variables and include the function file
968	# to the top of the real Makefile.
969	wrt_Makefile_header
970
971	# Add chroot commands
972	if [ "$METHOD" = "chroot" ] ; then
973	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
974	chroot=`cat chroot/???-chroot \| \
975	sed -e "s@chroot@$CHROOT_LOC@" \
976	-e '/#!\/bin\/bash/d' \
977	-e '/^export/d' \
978	-e '/^logout/d' \
979	-e 's@ \\\@ @g' \| \
980	tr -d '\n' \| \
981	sed -e 's/ */ /g' \
982	-e 's\|\\$\|&&\|g' \
983	-e 's\|exit\|\|g' \
984	-e 's\|$\| -c\|' \
985	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
986	-e 's\|set -e\|\|' \
987	-e 's\|set +h\|\|'`
988	echo -e "CHROOT1= $chroot\n" >> $MKFILE
989	fi
990
991	################## CHROOT ####################
992
993	if [[ "${METHOD}" = "chroot" ]]; then
994	(
995	cat << EOF
996
997	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
998	@sudo make do-housekeeping
999	@echo "$VERSION - jhalfs build" > clfs-release && \\
1000	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
1001	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
1002	@\$(call echo_finished,$VERSION)
1003
1004	ck_UID:
1005	@if [ \`id -u\` = "0" ]; then \\
1006	echo "+--------------------------------------------------+"; \\
1007	echo "\|You cannot run this makefile from the root account\|"; \\
1008	echo "+--------------------------------------------------+"; \\
1009	exit 1; \\
1010	fi
1011
1012	#---------------AS ROOT
1013	mk_SETUP:
1014	@\$(call echo_SU_request)
1015	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1016	@touch \$@
1017
1018	#---------------AS LUSER
1019	mk_CROSS: mk_SETUP
1020	@\$(call echo_PHASE,Cross and Temporary Tools)
1021	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1022	@sudo make restore-luser-env
1023	@touch \$@
1024
1025	mk_SUDO: mk_CROSS
1026	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1027	@touch \$@
1028
1029	#---------------CHROOT JAIL
1030	mk_SYSTOOLS: mk_SUDO
1031	@\$(call echo_CHROOT_request)
1032	@\$(call echo_PHASE, CHROOT JAIL )
1033	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
1034	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
1035	@touch \$@
1036
1037	mk_BLFS_TOOL: create-sbu_du-report
1038	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1039	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1040	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
1041	fi;
1042	@touch \$@
1043
1044	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1045	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1046	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1047	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
1048	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
1049	fi;
1050	@touch \$@
1051
1052	SETUP: $host_prep
1053	AS_LUSER: $cross_tools $temptools
1054	SUDO: $orphan_scripts
1055	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
1056	PREP_CHROOT_JAIL: ${chroottools}
1057	CHROOT_JAIL: SHELL=/tools/bin/bash
1058	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
1059	CUSTOM_TOOLS: $custom_list
1060
1061
1062	create-sbu_du-report: mk_SYSTOOLS
1063	@\$(call echo_message, Building)
1064	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
1065	./create-sbu_du-report.sh logs $VERSION; \\
1066	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1067	fi;
1068	@touch \$@
1069
1070	do-housekeeping:
1071	@-umount \$(MOUNT_PT)/dev/pts
1072	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
1073	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
1074	umount \$(MOUNT_PT)/\$\$link; \\
1075	unset link; \\
1076	else \\
1077	umount \$(MOUNT_PT)/dev/shm; \\
1078	fi
1079	@-umount \$(MOUNT_PT)/dev
1080	@-umount \$(MOUNT_PT)/sys
1081	@-umount \$(MOUNT_PT)/proc
1082	@-rm /tools /cross-tools
1083	@-if [ ! -f luser-exist ]; then \\
1084	userdel \$(LUSER); \\
1085	rm -rf \$(LUSER_HOME); \\
1086	fi;
1087
1088	EOF
1089	) >> $MKFILE
1090
1091	fi
1092
1093	################### BOOT #####################
1094
1095	if [[ "${METHOD}" = "boot" ]]; then
1096	(
1097	cat << EOF
1098
1099	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
1100	@sudo make restore-luser-env
1101	@sudo make do-housekeeping
1102	@\$(call echo_boot_finished,$VERSION)
1103
1104	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
1105	@echo "$VERSION - jhalfs build" > /etc/clfs-release
1106	@\$(call echo_finished,$VERSION)
1107
1108
1109	ck_UID:
1110	@if [ \`id -u\` = "0" ]; then \\
1111	echo "+--------------------------------------------------+"; \\
1112	echo "\|You cannot run this makefile from the root account\|"; \\
1113	echo "\|However, if this is the boot environment \|"; \\
1114	echo "\| the command you are looking for is \|"; \\
1115	echo "\| make makesys \|"; \\
1116	echo "\| to complete the build \|"; \\
1117	echo "+--------------------------------------------------+"; \\
1118	exit 1; \\
1119	fi
1120
1121	#---------------AS ROOT
1122
1123	mk_SETUP:
1124	@\$(call echo_SU_request)
1125	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1126	@touch \$@
1127
1128	#---------------AS LUSER
1129
1130	mk_CROSS: mk_SETUP
1131	@\$(call echo_PHASE,Cross Tool)
1132	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1133	@touch \$@
1134
1135	mk_SUDO: mk_CROSS
1136	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1137	@touch \$@
1138
1139	#---------------AS ROOT
1140
1141	mk_FINAL:
1142	@\$(call echo_PHASE,Final System)
1143	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
1144	@touch \$@
1145
1146	mk_BLFS_TOOL: mk_FINAL
1147	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1148	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1149	( make -C $BLFS_ROOT/work ); \\
1150	fi;
1151	@touch \$@
1152
1153	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1154	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1155	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1156	mkdir -p ${TRACKING_DIR}; \\
1157	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
1158	fi;
1159	@touch \$@
1160
1161	SETUP: $host_prep
1162	AS_LUSER: $cross_tools $temptools ${boottools}
1163	SUDO: $orphan_scripts
1164	AS_ROOT: SHELL=/tools/bin/bash
1165	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1166	CUSTOM_TOOLS: $custom_list
1167
1168	do-housekeeping:
1169	@-rm /tools /cross-tools
1170	@-if [ ! -f luser-exist ]; then \\
1171	userdel \$(LUSER); \\
1172	rm -rf \$(LUSER_HOME); \\
1173	fi;
1174
1175	EOF
1176	) >> $MKFILE
1177	fi
1178
1179	(
1180	cat << EOF
1181
1182	restore-luser-env:
1183	@\$(call echo_message, Building)
1184	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
1185	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
1186	fi;
1187	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
1188	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
1189	fi;
1190	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
1191	touch \$@ && \\
1192	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1193	echo --------------------------------------------------------------------------------\$(WHITE)
1194
1195	########################################################
1196
1197
1198	EOF
1199	) >> $MKFILE
1200
1201	# Bring over the items from the Makefile.tmp
1202	cat $MKFILE.tmp >> $MKFILE
1203	rm $MKFILE.tmp
1204
1205	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1206	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: