#!/bin/bash # $Id$ orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment #--------------------------------------# host_prep_Makefiles() { # #--------------------------------------# local CLFS_HOST echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}" # defined here, only for ease of reading CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")" ( cat << EOF 023-creatingtoolsdir: @\$(call echo_message, Building) @install -dv \$(MOUNT_PT)/tools && \\ rm -f /tools && \\ ln -s \$(MOUNT_PT)/tools / @\$(call housekeeping) 024-creatingcrossdir: 023-creatingtoolsdir @\$(call echo_message, Building) @install -dv \$(MOUNT_PT)/cross-tools && \\ rm -f /cross-tools && \\ ln -s \$(MOUNT_PT)/cross-tools / @\$(call housekeeping) 025-addinguser: 024-creatingcrossdir @\$(call echo_message, Building) @if [ ! -d \$(LUSER_HOME) ]; then \\ groupadd \$(LGROUP); \\ useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\ mkdir -pv \$(LUSER_HOME); \\ chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\ else \\ touch luser-exist; \\ fi @chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\ chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\ chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\ chmod a+wt \$(SRCSDIR) @\$(call housekeeping) 026-settingenvironment: 025-addinguser @\$(call echo_message, Building) @if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\ mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\ fi @if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\ mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\ fi; @echo "set +h" > \$(LUSER_HOME)/.bashrc && \\ echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\ echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\ echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\ echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\ echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\ echo "" >> \$(LUSER_HOME)/.bashrc && \\ echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\ echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\ echo "" >> \$(LUSER_HOME)/.bashrc && \\ echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\ echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\ echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\ echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc @chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\ chmod a+wt \$(MOUNT_PT) && \\ if [ -d \$(MOUNT_PT)/var ]; then \\ chown -R \$(LUSER) \$(MOUNT_PT)/var; \\ fi && \\ touch envars && \\ chown \$(LUSER):\$(LGROUP) envars @\$(call housekeeping) EOF ) >> $MKFILE.tmp host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment" } #--------------------------------------# cross_tools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}" for file in cross-tools/* ; do # Keep the script file name this_script=`basename $file` # # Skip this script... case $this_script in *cflags* | *variables* ) # work done in host_prep_Makefiles continue; ;; *) ;; esac # # Set the dependency for the first target. if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi # First append each name of the script files to a list (this will become # the names of the targets in the Makefile cross_tools="$cross_tools $this_script" # Grab the name of the target (minus the -headers or -cross in the case of gcc # and binutils in chapter 5) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@-static@@' \ -e 's@-final@@' \ -e 's@-64@@' \ -e 's@-n32@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}" # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #--------------------------------------# temptools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}" for file in temp-system/* ; do # Keep the script file name this_script=`basename $file` # # Deal with any odd scripts.. case $this_script in *choose) # The choose script will fail if you cannot enter the new environment # If the 'boot' build method was chosen don't run the script [[ $METHOD = "boot" ]] && continue; ;; *) ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile temptools="$temptools $this_script" # # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` # pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and to set the PKGDIR variable. # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #--------------------------------------# chroot_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}" for file in chroot/* ; do # Keep the script file name this_script=`basename $file` # # Skipping scripts is done now and not included in the build tree. case $this_script in *chroot*) continue ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile case "${this_script}" in *kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;; *) chroottools="$chroottools $this_script" ;; esac # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` pkg_tarball=$(get_package_tarball_name $name) # This is very ugly:: util-linux is in /chroot but must be run under LUSER # Same for e2fsprogs (in CLFS 1.1.0) # .. Customized makefile entry case "${this_script}" in *util-linux) LUSER_wrt_target "${this_script}" "$PREV" LUSER_wrt_unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; *util-linux-ng) LUSER_wrt_target "${this_script}" "$PREV" LUSER_wrt_unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; *util-linux-libs) LUSER_wrt_target "${this_script}" "$PREV" LUSER_wrt_unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; *e2fsprogs) LUSER_wrt_target "${this_script}" "$PREV" LUSER_wrt_unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; *e2fsprogs-libs) LUSER_wrt_target "${this_script}" "$PREV" LUSER_wrt_unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; esac #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # if [ "$pkg_tarball" != "" ] ; then CHROOT_Unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # # Select a script execution method case $this_script in *kernfs) wrt_RunAsRoot "${file}" ;; *) CHROOT_wrt_RunAsRoot "${file}" ;; esac # # Housekeeping...remove the build directory(ies), except if the package build fails. [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in... } #--------------------------------------# boot_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}" # # Create a target bootable partition containing a compile environment. Later # on we boot into this environment and contine the build. # for file in boot/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo | *introduction ) continue ;; *whatnext*) continue ;; *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the config file to /sources with a standardized name cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile case "${this_script}" in *changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;; *devices) orphan_scripts="${orphan_scripts} ${this_script}" ;; *) boottools="$boottools $this_script" ;; esac # # Grab the name of the target, strip id number and misc words. case $this_script in *kernel) name=linux ;; *bootscripts) name="bootscripts-cross-lfs" ;; *udev-rules) name="udev-cross-lfs" ;; *grub-build) name=grub ;; *-aboot-build) name=aboot ;; *yaboot-build) name=yaboot ;; *colo-build) name=colo ;; *silo-build) name=silo ;; *arcload-build) name=arcload ;; *lilo-build) name=lilo ;; *) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;; esac # Identify the unique version naming scheme for the clfs bootscripts..(bad boys) pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # # Select a script execution method case $this_script in # The following 2 scripts are defined in the /boot directory but need # to be run as a root user. Set them up here but run them in another phase *changingowner*) wrt_RunAsRoot "${file}" ;; *devices*) wrt_RunAsRoot "${file}" ;; *fstab*) if [[ -n "$FSTAB" ]]; then LUSER_wrt_CopyFstab else LUSER_wrt_RunAsUser "${file}" fi ;; *) LUSER_wrt_RunAsUser "${file}" ;; esac # # Housekeeping...remove any build directory(ies) except if the package build fails. [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# testsuite_tools_Makefiles() { # #--------------------------------------# if [[ "${METHOD}" = "chroot" ]]; then echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}" else echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}" PREV="" fi for file in testsuite-tools/* ; do # Keep the script file name this_script=`basename $file` # First append each name of the script files to a list (this will become # the names of the targets in the Makefile testsuitetools="$testsuitetools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # CHROOT_Unpack "$pkg_tarball" [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # CHROOT_wrt_RunAsRoot "${file}" # CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# final_system_Makefiles() { # #--------------------------------------# # Set envars and scripts for iteration targets if [[ -z "$1" ]] ; then local N="" # In boot method the makesys phase was initiated in testsuite_tools_makefile [[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV="" else local N=-build_$1 local basicsystem="" mkdir final-system$N cp final-system/* final-system$N for script in final-system$N/* ; do # Overwrite existing symlinks, files, and dirs sed -e 's/ln -sv/&f/g' \ -e 's/mv -v/&f/g' \ -e 's/mkdir -v/&p/g' -i ${script} # Rename the scripts mv ${script} ${script}$N done # Remove Bzip2 binaries before make install (CLFS-1.0 compatibility) sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2$N # Delete *old Readline libraries just after make install sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline$N fi if [[ "${METHOD}" = "chroot" ]]; then echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}" else echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}" fi for file in final-system$N/* ; do # Keep the script file name this_script=`basename $file` # Test if the stripping phase must be skipped. # Skip also temp-perl for iterative runs case $this_script in *stripping*) [[ "$STRIP" = "n" ]] && continue ;; *temp-perl*) [[ -n "$N" ]] && continue ;; esac # Grab the name of the target, strip id number, XXX-script. # name1 is partially stripped and should be used for logging files. # name is completely stripped and is used for grabbing # the package name. name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's,'$N',,'` name=`echo $name1 | sed -e 's@temp-@@' \ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` # Find the version of the command files, if it corresponds with the building of # a specific package. We need this here to can skip scripts not needed for # iterations rebuilds pkg_tarball=$(get_package_tarball_name $name) if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then case "${this_script}" in *stripping*) ;; *) continue ;; esac fi # Append each name of the script files to a list (this will become # the names of the targets in the Makefile basicsystem="$basicsystem ${this_script}" #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then # Touch timestamp file if installed files logs will be created. # But only for the firt build when running iterative builds. if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then CHROOT_wrt_TouchTimestamp fi CHROOT_Unpack "$pkg_tarball" # If the testsuites must be run, initialize the log file case $name in binutils | gcc | glibc | eglibc | gmp | mpfr | mpc | isl | cloog ) [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}" ;; * ) [[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}" ;; esac # If using optimizations, write the instructions [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # CHROOT_wrt_RunAsRoot "${file}" # # Write installed files log and remove the build directory(ies) # except if the package build fails. if [ "$pkg_tarball" != "" ] ; then CHROOT_wrt_RemoveBuildDirs "$name" if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then CHROOT_wrt_LogNewFiles "$name1" fi fi # # Include a touch of the target name so make can check # if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=${this_script} # Set system_build envar for iteration targets system_build=$basicsystem done # for file in final-system/* ... } #--------------------------------------# bootscripts_Makefiles() { # #--------------------------------------# if [[ "${METHOD}" = "chroot" ]]; then echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}" else echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}" fi for file in bootscripts/* ; do # Keep the script file name this_script=`basename $file` case $this_script in *udev) continue ;; # This is not a script but a commentary, we want udev-rules *console*) continue ;; # Use the files that came with the bootscripts *) ;; esac # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootscripttools="$bootscripttools $this_script" # Grab the name of the target, strip id number, XXX-script. # name1 is partially stripped and should be used for logging files. # name is completely stripped and is used for grabbing # the package name. name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` name=`echo $name1 | sed -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` case $name in *bootscripts*) name=bootscripts-cross-lfs ;; *udev-rules) name=udev-cross-lfs ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # if [ "$pkg_tarball" != "" ] ; then if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_TouchTimestamp fi CHROOT_Unpack "$pkg_tarball" fi # CHROOT_wrt_RunAsRoot "${file}" # # Write installed files log and remove the build directory(ies) # except if the package build fails. if [ "$pkg_tarball" != "" ] ; then CHROOT_wrt_RemoveBuildDirs "$name" if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_LogNewFiles "$name1" fi fi # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in bootscripts/* ... } #--------------------------------------# network_Makefiles() { # #--------------------------------------# if [[ "${METHOD}" = "chroot" ]]; then echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}" else echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}" fi for file in network/* ; do # Keep the script file name this_script=`basename $file` case $this_script in *choose) continue ;; # This is not a script but a commentary. *dhcp) continue ;; # Assume static networking. *dhcpcd) continue ;; # Assume static networking. *) ;; esac # First append each name of the script files to a list (this will become # the names of the targets in the Makefile networktools="$networktools $this_script" # Grab the name of the target, strip id number, XXX-script # name1 is partially stripped and should be used for logging files. # name is completely stripped and is used for grabbing # the package name. name1=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` name=`echo $name1 | sed -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` case $name in network-scripts) name=clfs-network-scripts ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # if [ "$pkg_tarball" != "" ] ; then if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_TouchTimestamp fi CHROOT_Unpack "$pkg_tarball" fi # CHROOT_wrt_RunAsRoot "${file}" # # Write installed files log and remove the build directory(ies) # except if the package build fails. if [ "$pkg_tarball" != "" ] ; then CHROOT_wrt_RemoveBuildDirs "$name" if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_LogNewFiles "$name1" fi fi # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in network/* ... } #--------------------------------------# bootable_Makefiles() { # #--------------------------------------# if [[ "${METHOD}" = "chroot" ]]; then echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}" else echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}" fi for file in bootable/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;; *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the config file to /sources with a standardized name cp $CONFIG $BUILDDIR/sources/kernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootabletools="$bootabletools $this_script" # # Grab the name of the target, strip id number and misc words. name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` case $this_script in *kernel*) name=linux ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # if [ "$pkg_tarball" != "" ] ; then if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_TouchTimestamp fi CHROOT_Unpack "$pkg_tarball" fi # # Select a script execution method case $this_script in *fstab*) if [[ -n "$FSTAB" ]]; then CHROOT_wrt_CopyFstab else CHROOT_wrt_RunAsRoot "${file}" fi ;; *) CHROOT_wrt_RunAsRoot "${file}" ;; esac # # Write installed files log and remove the build directory(ies) # except if the package build fails. if [ "$pkg_tarball" != "" ] ; then CHROOT_wrt_RemoveBuildDirs "$name" if [ "${INSTALL_LOG}" = "y" ] ; then CHROOT_wrt_LogNewFiles "$name" fi fi # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# build_Makefile() { # Construct a Makefile from the book scripts #--------------------------------------# echo "...Creating Makefile... ${BOLD}START${OFF}" cd $JHALFSDIR/${PROGNAME}-commands # Start with clean files >$MKFILE >$MKFILE.tmp method_cmds=${METHOD}_Makefiles host_prep_Makefiles # mk_SETUP (SETUP) $host_prep cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools temptools_Makefiles # mk_TEMP (LUSER) $temptools $method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools if [[ ! $TEST = "0" ]]; then testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools fi final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem # Add the iterations targets, if needed [[ "$COMPARE" = "y" ]] && wrt_compare_targets bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools if [ -d network ]; then network_Makefiles # If present, process network setup. fi bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools # Add the CUSTOM_TOOLS targets, if needed [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target # Add a header, some variables and include the function file # to the top of the real Makefile. wrt_Makefile_header # Add chroot commands if [ "$METHOD" = "chroot" ] ; then CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`" chroot=`cat chroot/???-chroot | \ sed -e "s@chroot@$CHROOT_LOC@" \ -e '/#!\/bin\/bash/d' \ -e '/^export/d' \ -e '/^logout/d' \ -e 's@ \\\@ @g' | \ tr -d '\n' | \ sed -e 's/ */ /g' \ -e 's|\\$|&&|g' \ -e 's|exit||g' \ -e 's|$| -c|' \ -e 's|"$${CLFS}"|$(MOUNT_PT)|'\ -e 's|set -e||' \ -e 's|set +h||'` echo -e "CHROOT1= $chroot\n" >> $MKFILE fi ################## CHROOT #################### if [[ "${METHOD}" = "chroot" ]]; then ( cat << EOF all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL @sudo make do-housekeeping @echo "$VERSION - jhalfs build" > clfs-release && \\ sudo mv clfs-release \$(MOUNT_PT)/etc && \\ sudo chown root:root \$(MOUNT_PT)/etc/clfs-release @\$(call echo_finished,$VERSION) ck_UID: @if [ \`id -u\` = "0" ]; then \\ echo "+--------------------------------------------------+"; \\ echo "|You cannot run this makefile from the root account|"; \\ echo "+--------------------------------------------------+"; \\ exit 1; \\ fi #---------------AS ROOT mk_SETUP: @\$(call echo_SU_request) @sudo make BREAKPOINT=\$(BREAKPOINT) SETUP @touch \$@ #---------------AS LUSER mk_CROSS: mk_SETUP @\$(call echo_PHASE,Cross and Temporary Tools) @( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" ) @sudo make restore-luser-env @touch \$@ mk_SUDO: mk_CROSS @sudo make BREAKPOINT=\$(BREAKPOINT) SUDO @touch \$@ #---------------CHROOT JAIL mk_SYSTOOLS: mk_SUDO @\$(call echo_CHROOT_request) @\$(call echo_PHASE, CHROOT JAIL ) @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL") @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL") @touch \$@ mk_BLFS_TOOL: create-sbu_du-report @if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\ \$(call sh_echo_PHASE,Building BLFS_TOOL); \\ (sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\ fi; @touch \$@ mk_CUSTOM_TOOLS: mk_BLFS_TOOL @if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\ \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\ sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\ (sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\ fi; @touch \$@ SETUP: $host_prep AS_LUSER: $cross_tools $temptools SUDO: $orphan_scripts PREP_CHROOT_JAIL: SHELL=/tools/bin/bash PREP_CHROOT_JAIL: ${chroottools} CHROOT_JAIL: SHELL=/tools/bin/bash CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools CUSTOM_TOOLS: $custom_list create-sbu_du-report: mk_SYSTOOLS @\$(call echo_message, Building) @if [ "\$(ADD_REPORT)" = "y" ]; then \\ ./create-sbu_du-report.sh logs $VERSION; \\ \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\ fi; @touch \$@ do-housekeeping: @-umount \$(MOUNT_PT)/dev/pts @-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\ link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\ umount \$(MOUNT_PT)/\$\$link; \\ unset link; \\ else \\ umount \$(MOUNT_PT)/dev/shm; \\ fi @-umount \$(MOUNT_PT)/dev @-umount \$(MOUNT_PT)/sys @-umount \$(MOUNT_PT)/proc @-rm /tools /cross-tools @-if [ ! -f luser-exist ]; then \\ userdel \$(LUSER); \\ rm -rf \$(LUSER_HOME); \\ fi; EOF ) >> $MKFILE fi ################### BOOT ##################### if [[ "${METHOD}" = "boot" ]]; then ( cat << EOF all: ck_UID mk_SETUP mk_CROSS mk_SUDO @sudo make restore-luser-env @sudo make do-housekeeping @\$(call echo_boot_finished,$VERSION) makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL @echo "$VERSION - jhalfs build" > /etc/clfs-release @\$(call echo_finished,$VERSION) ck_UID: @if [ \`id -u\` = "0" ]; then \\ echo "+--------------------------------------------------+"; \\ echo "|You cannot run this makefile from the root account|"; \\ echo "|However, if this is the boot environment |"; \\ echo "| the command you are looking for is |"; \\ echo "| make makesys |"; \\ echo "| to complete the build |"; \\ echo "+--------------------------------------------------+"; \\ exit 1; \\ fi #---------------AS ROOT mk_SETUP: @\$(call echo_SU_request) @sudo make BREAKPOINT=\$(BREAKPOINT) SETUP @touch \$@ #---------------AS LUSER mk_CROSS: mk_SETUP @\$(call echo_PHASE,Cross Tool) @( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" ) @touch \$@ mk_SUDO: mk_CROSS @sudo make BREAKPOINT=\$(BREAKPOINT) SUDO @touch \$@ #---------------AS ROOT mk_FINAL: @\$(call echo_PHASE,Final System) @( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT ) @touch \$@ mk_BLFS_TOOL: mk_FINAL @if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\ \$(call sh_echo_PHASE,Building BLFS_TOOL); \\ ( make -C $BLFS_ROOT/work ); \\ fi; @touch \$@ mk_CUSTOM_TOOLS: mk_BLFS_TOOL @if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\ \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\ mkdir -p ${TRACKING_DIR}; \\ ( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\ fi; @touch \$@ SETUP: $host_prep AS_LUSER: $cross_tools $temptools ${boottools} SUDO: $orphan_scripts AS_ROOT: SHELL=/tools/bin/bash AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools CUSTOM_TOOLS: $custom_list do-housekeeping: @-rm /tools /cross-tools @-if [ ! -f luser-exist ]; then \\ userdel \$(LUSER); \\ rm -rf \$(LUSER_HOME); \\ fi; EOF ) >> $MKFILE fi ( cat << EOF restore-luser-env: @\$(call echo_message, Building) @if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\ mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\ fi; @if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\ mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\ fi; @chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) ######################################################## EOF ) >> $MKFILE # Bring over the items from the Makefile.tmp cat $MKFILE.tmp >> $MKFILE rm $MKFILE.tmp echo "Creating Makefile... ${BOLD}DONE${OFF}" }