#!/bin/sh # $Id$ orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment ################################### ### FUNCTIONS ### ################################### #--------------------------------------# BOOT_wrt_target() { # "${this_script}" "$PREV" #--------------------------------------# local i=$1 local PREV=$2 case $i in iteration* ) local LOGFILE=$this_script.log ;; * ) local LOGFILE=$this_script ;; esac ( cat << EOF $i: $PREV @\$(call echo_message, Building) @./progress_bar.sh \$@ \$\$PPID & @echo -e "\n\`date\`\n\nKB: \`du -skx --exclude=${SCRIPT_ROOT}\`\n" >logs/$LOGFILE EOF ) >> $MKFILE.tmp } #--------------------------------------# BOOT_wrt_Unpack() { # "$pkg_tarball" #--------------------------------------# local FILE=$1 local optSAVE_PREVIOUS=$2 if [ "${optSAVE_PREVIOUS}" != "1" ]; then ( cat << EOF @\$(call remove_existing_dirs2,$FILE) EOF ) >> $MKFILE.tmp fi ( cat << EOF @\$(call unpack3,$FILE) @\$(call get_pkg_root2) EOF ) >> $MKFILE.tmp } #----------------------------------# BOOT_wrt_RunAsRoot() { # "${this_script}" "${file}" #----------------------------------# local this_script=$1 local file=$2 ( cat << EOF @( time { source envars && ${PROGNAME}-commands/`dirname $file`/\$@ >>logs/\$@ 2>&1 ; } ) 2>>logs/\$@ && \\ echo -e "\nKB: \`du -skx --exclude=${SCRIPT_ROOT} \`\n" >>logs/\$@ EOF ) >> $MKFILE.tmp } #--------------------------------------# BOOT_wrt_RemoveBuildDirs() { # "${name}" #--------------------------------------# local name=$1 ( cat << EOF @\$(call remove_build_dirs2,$name) EOF ) >> $MKFILE.tmp } #----------------------------------# BOOT_wrt_test_log() { # #----------------------------------# local TESTLOGFILE=$1 ( cat << EOF @echo "export TEST_LOG=/\$(SCRIPT_ROOT)/test-logs/$TESTLOGFILE" >> envars && \\ echo -e "\n\`date\`\n" >test-logs/$TESTLOGFILE EOF ) >> $MKFILE.tmp } #----------------------------------# BOOT_wrt_CopyFstab() { # #----------------------------------# ( cat << EOF @( time { cp -v /sources/fstab /etc/fstab >>logs/${this_script} 2>&1 ; } ) 2>>logs/${this_script} EOF ) >> $MKFILE.tmp } ######################################## #--------------------------------------# host_prep_Makefiles() { # #--------------------------------------# local CLFS_HOST echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}" # defined here, only for ease of reading CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")" ( cat << EOF 023-creatingtoolsdir: @\$(call echo_message, Building) @mkdir \$(MOUNT_PT)/tools && \\ rm -f /tools && \\ ln -s \$(MOUNT_PT)/tools / @if [ ! -d \$(MOUNT_PT)/sources ]; then \\ mkdir \$(MOUNT_PT)/sources; \\ fi; @chmod a+wt \$(MOUNT_PT)/sources && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 024-creatingcrossdir: 023-creatingtoolsdir @mkdir -v \$(MOUNT_PT)/cross-tools && \\ rm -f /cross-tools && \\ ln -s \$(MOUNT_PT)/cross-tools / @touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 025-addinguser: 024-creatingcrossdir @\$(call echo_message, Building) @if [ ! -d /home/\$(LUSER) ]; then \\ groupadd \$(LGROUP); \\ useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\ else \\ touch luser-exist; \\ fi; @chown \$(LUSER) \$(MOUNT_PT) && \\ chown \$(LUSER) \$(MOUNT_PT)/tools && \\ chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\ chown \$(LUSER) \$(MOUNT_PT)/sources && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 026-settingenvironment: 025-addinguser @\$(call echo_message, Building) @if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\ mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\ fi; @if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\ mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\ fi; @echo "set +h" > /home/\$(LUSER)/.bashrc && \\ echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\ echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\ echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\ echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\ echo "" >> /home/\$(LUSER)/.bashrc && \\ echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\ echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\ echo "" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\ touch envars && \\ chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) EOF ) >> $MKFILE.tmp host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment" } #--------------------------------------# cross_tools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}" for file in cross-tools/* ; do # Keep the script file name this_script=`basename $file` # # Skip this script... case $this_script in *cflags* | *variables* ) # work done in host_prep_Makefiles continue; ;; *) ;; esac # # Set the dependency for the first target. if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi # First append each name of the script files to a list (this will become # the names of the targets in the Makefile cross_tools="$cross_tools $this_script" # Grab the name of the target (minus the -headers or -cross in the case of gcc # and binutils in chapter 5) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@-static@@' \ -e 's@-final@@' \ -e 's@-64@@' \ -e 's@-n32@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #--------------------------------------# temptools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}" for file in temp-system/* ; do # Keep the script file name this_script=`basename $file` # # Deal with any odd scripts.. case $this_script in *choose) # The choose script will fail if you cannot enter the new environment # If the 'boot' build method was chosen don't run the script [[ $METHOD = "boot" ]] && continue; ;; *) ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile temptools="$temptools $this_script" # # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` # pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and to set the PKGDIR variable. # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #--------------------------------------# chroot_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}" for file in chroot/* ; do # Keep the script file name this_script=`basename $file` # # Skipping scripts is done now and not included in the build tree. case $this_script in *chroot*) continue ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile case "${this_script}" in *util-linux) : ;; *kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;; *) chroottools="$chroottools $this_script" ;; esac # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` pkg_tarball=$(get_package_tarball_name $name) # This is very ugly:: util-linux is in /chroot but should be run under LUSER # A custom collection of routines. case "${this_script}" in *util-linux) LUSER_wrt_target "${this_script}" "$PREV" [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" LUSER_wrt_RunAsUser "${file}" LUSER_RemoveBuildDirs "${name}" wrt_touch temptools="$temptools $this_script" continue ;; esac #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # if [ "$pkg_tarball" != "" ] ; then case $this_script in *util-linux) ROOT_Unpack "$pkg_tarball" ;; *) CHROOT_Unpack "$pkg_tarball" ;; esac [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # # Select a script execution method case $this_script in *kernfs) wrt_RunAsRoot "${this_script}" "${file}" ;; *util-linux) ROOT_RunAsRoot "${file}" ;; *) CHROOT_wrt_RunAsRoot "${file}" ;; esac # # Housekeeping...remove the build directory(ies), except if the package build fails. [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in... } #--------------------------------------# boot_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}" # # Create a target bootable partition containing a compile environment. Later # on we boot into this environment and contine the build. # for file in boot/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo ) continue ;; *whatnext*) continue ;; *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the config file to /sources with a standardized name cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile case "${this_script}" in *changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;; *devices) orphan_scripts="${orphan_scripts} ${this_script}" ;; *) boottools="$boottools $this_script" ;; esac # # Grab the name of the target, strip id number and misc words. case $this_script in *kernel) name=linux ;; *bootscripts) name="bootscripts-cross-lfs" ;; *udev-rules) name="udev-cross-lfs" ;; *grub-build) name=grub ;; *-aboot-build) name=aboot ;; *yaboot-build) name=yaboot ;; *colo-build) name=colo ;; *silo-build) name=silo ;; *arcload-build) name=arcload ;; *lilo-build) name=lilo ;; *) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;; esac # Identify the unique version naming scheme for the clfs bootscripts..(bad boys) pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # # Select a script execution method case $this_script in # The following 2 scripts are defined in the /boot directory but need # to be run as a root user. Set them up here but run them in another phase *changingowner*) wrt_RunAsRoot "${this_script}" "${file}" ;; *devices*) wrt_RunAsRoot "${this_script}" "${file}" ;; *fstab*) if [[ -n "$FSTAB" ]]; then LUSER_wrt_CopyFstab else LUSER_wrt_RunAsUser "${file}" fi ;; *) LUSER_wrt_RunAsUser "${file}" ;; esac # # Housekeeping...remove any build directory(ies) except if the package build fails. [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# chroot_testsuite_tools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}" for file in testsuite-tools/* ; do # Keep the script file name this_script=`basename $file` # First append each name of the script files to a list (this will become # the names of the targets in the Makefile testsuitetools="$testsuitetools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # CHROOT_Unpack "$pkg_tarball" [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # CHROOT_wrt_RunAsRoot "${file}" # CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# boot_testsuite_tools_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}" for file in testsuite-tools/* ; do # Keep the script file name this_script=`basename $file` # First append each name of the script files to a list (this will become # the names of the targets in the Makefile PREV= testsuitetools="$testsuitetools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. BOOT_wrt_target "${this_script}" "$PREV" # BOOT_wrt_Unpack "$pkg_tarball" [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name" # BOOT_wrt_RunAsRoot "${this_script}" "${file}" # BOOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #--------------------------------------# chroot_final_system_Makefiles() { # #--------------------------------------# # Set envars and scripts for iteration targets LOGS="" # Start with an empty global LOGS envar if [[ -z "$1" ]] ; then local N="" else local N=-build_$1 local basicsystem="" mkdir final-system$N cp final-system/* final-system$N for script in final-system$N/* ; do # Overwrite existing symlinks, files, and dirs sed -e 's/ln -sv/&f/g' \ -e 's/mv -v/&f/g' \ -e 's/mkdir -v/&p/g' -i ${script} done # Remove Bzip2 binaries before make install sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2 # Delete *old Readline libraries just after make install sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline fi echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}" for file in final-system$N/* ; do # Keep the script file name this_script=`basename $file` # Test if the stripping phase must be skipped. # Skip alsp temp-perl for iterative runs case $this_script in *stripping*) [[ "$STRIP" = "n" ]] && continue ;; *temp-perl*) [[ -n "$N" ]] && continue ;; esac # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@temp-@@' \ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` # Find the version of the command files, if it corresponds with the building of # a specific package. We need this here to can skip scripts not needed for # iterations rebuilds pkg_tarball=$(get_package_tarball_name $name) if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then case "${this_script}" in *stripping*) ;; *) continue ;; esac fi # Append each name of the script files to a list (this will become # the names of the targets in the Makefile basicsystem="$basicsystem ${this_script}${N}" # Append each name of the script files to a list (this will become # the names of the logs to be moved for each iteration) LOGS="$LOGS ${this_script}" #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}${N}" "$PREV" # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then CHROOT_Unpack "$pkg_tarball" # If the testsuites must be run, initialize the log file case $name in binutils | gcc | glibc ) [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}" ;; * ) [[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}" ;; esac # If using optimizations, write the instructions [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # CHROOT_wrt_RunAsRoot "${file}" # [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$basicsystem done # for file in final-system/* ... } #--------------------------------------# boot_final_system_Makefiles() { # #--------------------------------------# # Set envars and scripts for iteration targets LOGS="" # Start with an empty global LOGS envar if [[ -z "$1" ]] ; then local N="" # The makesys phase was initiated in bm_testsuite_tools_makefile [[ "$TEST" = 0 ]] && PREV="" else local N=-build_$1 local basicsystem="" mkdir final-system$N cp final-system/* final-system$N for script in final-system$N/* ; do # Overwrite existing symlinks, files, and dirs sed -e 's/ln -sv/&f/g' \ -e 's/mv -v/&f/g' \ -e 's/mkdir -v/&p/g' -i ${script} done # Remove Bzip2 binaries before make install sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2 # Delete *old Readline libraries just after make install sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline fi echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}" for file in final-system$N/* ; do # Keep the script file name this_script=`basename $file` # Test if the stripping phase must be skipped # Skip alsp temp-perl for iterative runs case $this_script in *stripping*) [[ "$STRIP" = "n" ]] && continue ;; *temp-perl*) [[ -n "$N" ]] && continue ;; esac # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@temp-@@' \ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` # Find the version of the command files, if it corresponds with the building of # a specific package. We need this here to can skip scripts not needed for # iterations rebuilds pkg_tarball=$(get_package_tarball_name $name) if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then case "${this_script}" in *stripping*) ;; *) continue ;; esac fi # Append each name of the script files to a list (this will become # the names of the targets in the Makefile basicsystem="$basicsystem ${this_script}${N}" # Append each name of the script files to a list (this will become # the names of the logs to be moved for each iteration) LOGS="$LOGS ${this_script}" #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. BOOT_wrt_target "${this_script}${N}" "$PREV" # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then FILE="$pkg_tarball" BOOT_wrt_Unpack "$FILE" # If the testsuites must be run, initialize the log file case $name in binutils | gcc | glibc ) [[ "$TEST" != "0" ]] && BOOT_wrt_test_log "${this_script}" ;; * ) [[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && BOOT_wrt_test_log "${this_script}" ;; esac # If using optimizations, write the instructions [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # BOOT_wrt_RunAsRoot "${this_script}" "${file}" # [[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$basicsystem done # for file in final-system/* ... } #--------------------------------------# chroot_bootscripts_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}" for file in bootscripts/* ; do # Keep the script file name this_script=`basename $file` case $this_script in *udev) continue ;; # This is not a script but a commentary, we want udev-rules *console*) continue ;; # Use the files that came with the bootscripts *) ;; esac # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootscripttools="$bootscripttools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` case $name in *bootscripts*) name=bootscripts-cross-lfs ;; *udev-rules) name=udev-cross-lfs ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball" # CHROOT_wrt_RunAsRoot "${file}" # [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in bootscripts/* ... } #--------------------------------------# boot_bootscripts_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}" for file in bootscripts/* ; do # Keep the script file name this_script=`basename $file` case $this_script in *udev) continue ;; # This is not a script but a commentary *console*) continue ;; # Use the files that came with the bootscripts *) ;; esac # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootscripttools="$bootscripttools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` case $name in *bootscripts*) name=bootscripts-cross-lfs ;; *udev-rules) name=udev-cross-lfs ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. BOOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # [[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball" # BOOT_wrt_RunAsRoot "${this_script}" "${file}" # [[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in bootscripts/* ... } #--------------------------------------# chroot_bootable_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}" for file in {bootable,the-end}/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;; *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the config file to /sources with a standardized name cp $CONFIG $BUILDDIR/sources/kernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootabletools="$bootabletools $this_script" # # Grab the name of the target, strip id number and misc words. name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` case $this_script in *kernel*) name=linux ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. CHROOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball" # # Select a script execution method case $this_script in *fstab*) if [[ -n "$FSTAB" ]]; then CHROOT_wrt_CopyFstab else CHROOT_wrt_RunAsRoot "${file}" fi ;; *) CHROOT_wrt_RunAsRoot "${file}" ;; esac # # Housekeeping...remove any build directory(ies) except if the package build fails. [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # Add SBU-disk_usage report target if required if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi } #--------------------------------------# boot_bootable_Makefiles() { # #--------------------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}" for file in {bootable,the-end}/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the named config file to /sources with a standardized name cp $CONFIG $BUILDDIR/sources/kernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootabletools="$bootabletools $this_script" # # Grab the name of the target, strip id number and misc words. case $this_script in *kernel) name=linux ;; *) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. BOOT_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... # Insert instructions for unpacking the package and changing directories # [[ "$pkg_tarball" != "" ]] && BOOT_wrt_Unpack "$pkg_tarball" # # Select a script execution method case $this_script in *fstab*) if [[ -n "$FSTAB" ]]; then # Minimal boot mode has no access to original file, store in /sources cp $FSTAB $BUILDDIR/sources/fstab BOOT_wrt_CopyFstab "${this_script}" else BOOT_wrt_RunAsRoot "${this_script}" "${file}" fi ;; *) BOOT_wrt_RunAsRoot "${this_script}" "${file}" ;; esac # # Housekeeping...remove any build directory(ies) except if the package build fails. [[ "$pkg_tarball" != "" ]] && BOOT_wrt_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # Add SBU-disk_usage report target if required if [[ "$REPORT" = "y" ]] ; then wrt_report ; fi } #--------------------------------------# build_Makefile() { # Construct a Makefile from the book scripts #--------------------------------------# # # Script crashes if error trapping is on # set +e declare -f method_cmds declare -f testsuite_cmds declare -f final_sys_cmds declare -f bootscripts_cmds declare -f bootable_cmds set -e echo "...Creating Makefile... ${BOLD}START${OFF}" cd $JHALFSDIR/${PROGNAME}-commands # Start with a clean files >$MKFILE >$MKFILE.tmp method_cmds=${METHOD}_Makefiles testsuite_cmds=${METHOD}_testsuite_tools_Makefiles final_sys_cmds=${METHOD}_final_system_Makefiles bootscripts_cmds=${METHOD}_bootscripts_Makefiles bootable_cmds=${METHOD}_bootable_Makefiles host_prep_Makefiles # mk_SETUP (SETUP) $host_prep cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools temptools_Makefiles # mk_TEMP (LUSER) $temptools $method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools if [[ ! $TEST = "0" ]]; then $testsuite_cmds # mk_SYSTOOLS (CHROOT) $testsuitetools fi $final_sys_cmds # mk_FINAL (CHROOT) $basicsystem # Add the iterations targets, if needed [[ "$COMPARE" = "y" ]] && wrt_compare_targets $bootscripts_cmds # mk_BOOTSCRIPT (CHROOT) $bootscripttools $bootable_cmds # mk_BOOTABLE (CHROOT) $bootabletools # Add a header, some variables and include the function file # to the top of the real Makefile. ( cat << EOF $HEADER SRC = /sources MOUNT_PT = $BUILDDIR PKG_LST = $PKG_LST LUSER = $LUSER LGROUP = $LGROUP SCRIPT_ROOT = $SCRIPT_ROOT BASEDIR = \$(MOUNT_PT) SRCSDIR = \$(BASEDIR)/sources CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs crSRCSDIR = /sources crCMDSDIR = /\$(SCRIPT_ROOT)/$PROGNAME-commands crLOGDIR = /\$(SCRIPT_ROOT)/logs crTESTLOGDIR = /\$(SCRIPT_ROOT)/test-logs SU_LUSER = su - \$(LUSER) -c LUSER_HOME = /home/\$(LUSER) PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n" PRT_DU_CR = echo -e "\nKB: \`du -skx --exclude=\$(SCRIPT_ROOT) / \`\n" include makefile-functions EOF ) > $MKFILE # Add chroot commands if [ "$METHOD" = "chroot" ] ; then CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`" chroot=`cat chroot/*chroot* | \ sed -e "s@chroot@$CHROOT_LOC@" \ -e '/#!\/tools\/bin\/bash/d' \ -e '/^export/d' \ -e '/^logout/d' \ -e 's@ \\\@ @g' | \ tr -d '\n' | \ sed -e 's/ */ /g' \ -e 's|\\$|&&|g' \ -e 's|exit||g' \ -e 's|$| -c|' \ -e 's|"$$CLFS"|$(MOUNT_PT)|'\ -e 's|set -e||'` echo -e "CHROOT1= $chroot\n" >> $MKFILE fi ################## CHROOT #################### if [[ "${METHOD}" = "chroot" ]]; then ( cat << EOF all: mk_SETUP mk_CROSS mk_TEMP mk_SYSTOOLS mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE do-housekeeping @\$(call echo_finished,$VERSION) #---------------AS ROOT mk_SETUP: @\$(call echo_SU_request) @sudo make SETUP @touch \$@ #---------------AS LUSER mk_CROSS: mk_SETUP @\$(call echo_PHASE,Cross Tool) @( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" ) @touch \$@ mk_TEMP: mk_CROSS @\$(call echo_PHASE,Temporary Tools) @( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" ) @touch \$@ # # The convoluted piece of code below is necessary to provide 'make' with a valid shell in the # chroot environment. (Unless someone knows a different way) # Manually create the /bin directory and provide link to the /tools dir. # Also change the original symlink creation to include (f)orce to prevent failure due to # pre-existing links. #---------------CHROOT JAIL mk_SYSTOOLS: mk_TEMP $orphan_scripts @mkdir \$(MOUNT_PT)/bin && \\ cd \$(MOUNT_PT)/bin && \\ ln -sf /tools/bin/bash bash; ln -sf bash sh @sed -e 's|^ln -sv|ln -svf|' -i \$(CMDSDIR)/chroot/082-createfiles @\$(call echo_CHROOT_request) @\$(call echo_PHASE, Chroot systools) @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make SYSTOOLS") @touch \$@ mk_FINAL: mk_SYSTOOLS @\$(call echo_PHASE,Final System) @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make FINAL") @touch \$@ mk_BOOTSCRIPT: mk_FINAL @\$(call echo_PHASE,Bootscript) @\$(call echo_CHROOT_request) @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTSCRIPT") @touch \$@ mk_BOOTABLE: mk_BOOTSCRIPT @\$(call echo_PHASE, Make bootable ) @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BOOTABLE") @touch \$@ EOF ) >> $MKFILE fi ################### BOOT ##################### if [[ "${METHOD}" = "boot" ]]; then ( cat << EOF all: mk_SETUP mk_CROSS mk_TEMP mk_SYSTOOLS $orphan_scripts restore-luser-env @\$(call echo_boot_finished,$VERSION) makesys: mk_FINAL mk_BOOTSCRIPT mk_BOOTABLE @\$(call echo_finished,$VERSION) #---------------AS ROOT mk_SETUP: @\$(call echo_SU_request) @sudo make SETUP @touch \$@ #---------------AS LUSER mk_CROSS: mk_SETUP @\$(call echo_PHASE,Cross Tool) @( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CROSS" ) @touch \$@ mk_TEMP: mk_CROSS @\$(call echo_PHASE,Temporary Tools) @( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make TEMP" ) @touch \$@ mk_SYSTOOLS: mk_TEMP @\$(call echo_PHASE,Minimal Boot system) @( \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SYSTOOLS" ) @touch \$@ #---------------AS ROOT mk_FINAL: @\$(call echo_PHASE,Final System) @( make FINAL ) @touch \$@ mk_BOOTSCRIPT: mk_FINAL @\$(call echo_PHASE,Bootscript) @( make BOOTSCRIPT ) @touch \$@ mk_BOOTABLE: mk_BOOTSCRIPT @\$(call echo_PHASE,Making Bootable) @( make BOOTABLE ) @touch \$@ EOF ) >> $MKFILE fi ( cat << EOF SETUP: $host_prep CROSS: $cross_tools TEMP: $temptools SYSTOOLS: ${chroottools}${boottools} FINAL: $testsuitetools $basicsystem BOOTSCRIPT: $bootscripttools BOOTABLE: $bootabletools restart: @echo "This feature does not exist for the CLFS makefile. (yet)" restore-luser-env: @\$(call echo_message, Building) @if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\ mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\ fi; @if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\ mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\ fi; @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) do-housekeeping: @-umount \$(MOUNT_PT)/dev/pts @-umount \$(MOUNT_PT)/dev/shm @-umount \$(MOUNT_PT)/dev @-umount \$(MOUNT_PT)/sys @-umount \$(MOUNT_PT)/proc @-if [ ! -f luser-exist ]; then \\ userdel \$(LUSER); \\ rm -rf /home/\$(LUSER); \\ fi; ######################################################## EOF ) >> $MKFILE # Bring over the items from the Makefile.tmp cat $MKFILE.tmp >> $MKFILE rm $MKFILE.tmp echo "Creating Makefile... ${BOLD}DONE${OFF}" }