source: CLFS/master.sh@ 1838bc7

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk
Last change on this file since 1838bc7 was 1838bc7, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago

Changed how create-sbu_du-report target is created.
Added blfs-tool support to HLFS.

  • Property mode set to 100644
File size: 44.3 KB
Line 
1#!/bin/bash
2# $Id$
3
4
5orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8#--------------------------------------#
9host_prep_Makefiles() { #
10#--------------------------------------#
11 local CLFS_HOST
12
13 echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15 # defined here, only for ease of reading
16 CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
17(
18cat << EOF
19023-creatingtoolsdir:
20 @\$(call echo_message, Building)
21 @mkdir \$(MOUNT_PT)/tools && \\
22 rm -f /tools && \\
23 ln -s \$(MOUNT_PT)/tools /
24 @if [ ! -d \$(MOUNT_PT)/sources ]; then \\
25 mkdir \$(MOUNT_PT)/sources; \\
26 fi;
27 @chmod a+wt \$(MOUNT_PT)/sources && \\
28 touch \$@ && \\
29 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
30 echo --------------------------------------------------------------------------------\$(WHITE)
31
32024-creatingcrossdir: 023-creatingtoolsdir
33 @mkdir -v \$(MOUNT_PT)/cross-tools && \\
34 rm -f /cross-tools && \\
35 ln -s \$(MOUNT_PT)/cross-tools /
36 @touch \$@ && \\
37 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
38 echo --------------------------------------------------------------------------------\$(WHITE)
39
40025-addinguser: 024-creatingcrossdir
41 @\$(call echo_message, Building)
42 @if [ ! -d /home/\$(LUSER) ]; then \\
43 groupadd \$(LGROUP); \\
44 useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
45 else \\
46 touch luser-exist; \\
47 fi;
48 @chown \$(LUSER) \$(MOUNT_PT) && \\
49 chown \$(LUSER) \$(MOUNT_PT)/tools && \\
50 chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
51 chown \$(LUSER) \$(MOUNT_PT)/sources && \\
52 touch \$@ && \\
53 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
54 echo --------------------------------------------------------------------------------\$(WHITE)
55
56026-settingenvironment: 025-addinguser
57 @\$(call echo_message, Building)
58 @if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
59 mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
60 fi;
61 @if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
62 mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
63 fi;
64 @echo "set +h" > /home/\$(LUSER)/.bashrc && \\
65 echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
66 echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
67 echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
68 echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
69 echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
70 echo "" >> /home/\$(LUSER)/.bashrc && \\
71 echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
72 echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
73 echo "" >> /home/\$(LUSER)/.bashrc && \\
74 echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
75 echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
76 echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
77 echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
78 @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
79 touch envars && \\
80 chmod -R a+wt \$(MOUNT_PT) && \\
81 chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
82 touch \$@ && \\
83 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
84 echo --------------------------------------------------------------------------------\$(WHITE)
85EOF
86) >> $MKFILE.tmp
87 host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
88
89}
90
91#--------------------------------------#
92cross_tools_Makefiles() { #
93#--------------------------------------#
94 echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
95
96 for file in cross-tools/* ; do
97 # Keep the script file name
98 this_script=`basename $file`
99 #
100 # Skip this script...
101 case $this_script in
102 *cflags* | *variables* ) # work done in host_prep_Makefiles
103 continue; ;;
104 *) ;;
105 esac
106 #
107 # Set the dependency for the first target.
108 if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
109
110 # First append each name of the script files to a list (this will become
111 # the names of the targets in the Makefile
112 cross_tools="$cross_tools $this_script"
113
114 # Grab the name of the target (minus the -headers or -cross in the case of gcc
115 # and binutils in chapter 5)
116 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
117 -e 's@-static@@' \
118 -e 's@-final@@' \
119 -e 's@-64@@' \
120 -e 's@-n32@@'`
121 pkg_tarball=$(get_package_tarball_name $name)
122
123 #--------------------------------------------------------------------#
124 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
125 #--------------------------------------------------------------------#
126 #
127 # Drop in the name of the target on a new line, and the previous target
128 # as a dependency. Also call the echo_message function.
129 LUSER_wrt_target "${this_script}" "$PREV"
130 #
131 # If $pkg_tarball isn't empty, we've got a package...
132 #
133 [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
134 #
135 LUSER_wrt_RunAsUser "${file}"
136 #
137 [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
138 #
139 # Include a touch of the target name so make can check if it's already been made.
140 wrt_touch
141 #
142 #--------------------------------------------------------------------#
143 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
144 #--------------------------------------------------------------------#
145 #
146 # Keep the script file name for Makefile dependencies.
147 PREV=$this_script
148
149 done # for file in ....
150}
151
152#--------------------------------------#
153temptools_Makefiles() { #
154#--------------------------------------#
155 echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
156
157 for file in temp-system/* ; do
158 # Keep the script file name
159 this_script=`basename $file`
160 #
161 # Deal with any odd scripts..
162 case $this_script in
163 *choose) # The choose script will fail if you cannot enter the new environment
164 # If the 'boot' build method was chosen don't run the script
165 [[ $METHOD = "boot" ]] && continue; ;;
166 *) ;;
167 esac
168
169 #
170 # First append each name of the script files to a list (this will become
171 # the names of the targets in the Makefile
172 temptools="$temptools $this_script"
173
174 #
175 # Grab the name of the target, strip id number, XXX-script
176 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
177 #
178 pkg_tarball=$(get_package_tarball_name $name)
179
180 #--------------------------------------------------------------------#
181 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
182 #--------------------------------------------------------------------#
183 #
184 # Drop in the name of the target on a new line, and the previous target
185 # as a dependency. Also call the echo_message function.
186 LUSER_wrt_target "${this_script}" "$PREV"
187 #
188 # If $pkg_tarball isn't empty, we've got a package...
189 # Insert instructions for unpacking the package and to set the PKGDIR variable.
190 #
191 [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
192 [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
193 #
194 LUSER_wrt_RunAsUser "${file}"
195 #
196 [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
197 #
198 # Include a touch of the target name so make can check if it's already been made.
199 wrt_touch
200 #
201 #--------------------------------------------------------------------#
202 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
203 #--------------------------------------------------------------------#
204 #
205 # Keep the script file name for Makefile dependencies.
206 PREV=$this_script
207 done # for file in ....
208}
209
210
211#--------------------------------------#
212chroot_Makefiles() { #
213#--------------------------------------#
214 echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
215
216 for file in chroot/* ; do
217 # Keep the script file name
218 this_script=`basename $file`
219 #
220 # Skipping scripts is done now and not included in the build tree.
221 case $this_script in
222 *chroot*) continue ;;
223 esac
224
225 #
226 # First append each name of the script files to a list (this will become
227 # the names of the targets in the Makefile
228 case "${this_script}" in
229 *util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
230 *kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
231 *) chroottools="$chroottools $this_script" ;;
232 esac
233
234 # Grab the name of the target, strip id number, XXX-script
235 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
236
237 pkg_tarball=$(get_package_tarball_name $name)
238
239 # This is very ugly:: util-linux is in /chroot but must be run under LUSER
240 # .. Customized makefile entry
241 case "${this_script}" in
242 *util-linux)
243 LUSER_wrt_target "${this_script}" "$PREV"
244 LUSER_wrt_unpack "$pkg_tarball"
245 [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
246 LUSER_wrt_RunAsUser "${file}"
247 LUSER_RemoveBuildDirs "${name}"
248 wrt_touch
249 temptools="$temptools $this_script"
250 continue ;;
251 esac
252
253
254 #--------------------------------------------------------------------#
255 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
256 #--------------------------------------------------------------------#
257 #
258 # Drop in the name of the target on a new line, and the previous target
259 # as a dependency. Also call the echo_message function.
260 CHROOT_wrt_target "${this_script}" "$PREV"
261 #
262 # If $pkg_tarball isn't empty, we've got a package...
263 # Insert instructions for unpacking the package and changing directories
264 #
265 if [ "$pkg_tarball" != "" ] ; then
266 CHROOT_Unpack "$pkg_tarball"
267 [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
268 fi
269 #
270 # Select a script execution method
271 case $this_script in
272 *kernfs) wrt_RunAsRoot "${file}" ;;
273 *) CHROOT_wrt_RunAsRoot "${file}" ;;
274 esac
275 #
276 # Housekeeping...remove the build directory(ies), except if the package build fails.
277 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
278 #
279 # Include a touch of the target name so make can check if it's already been made.
280 wrt_touch
281 #
282 #--------------------------------------------------------------------#
283 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
284 #--------------------------------------------------------------------#
285 #
286 # Keep the script file name for Makefile dependencies.
287 PREV=$this_script
288
289 done # for file in...
290}
291
292
293#--------------------------------------#
294boot_Makefiles() { #
295#--------------------------------------#
296
297 echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
298 #
299 # Create a target bootable partition containing a compile environment. Later
300 # on we boot into this environment and contine the build.
301 #
302 for file in boot/* ; do
303 # Keep the script file name
304 this_script=`basename $file`
305
306 # A little housekeeping on the scripts
307 case $this_script in
308 *grub | *aboot | *colo | *silo | *arcload | *lilo ) continue ;;
309 *whatnext*) continue ;;
310 *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
311 *kernel) # if there is no kernel config file do not build the kernel
312 [[ -z $CONFIG ]] && continue
313 # Copy the config file to /sources with a standardized name
314 cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
315 ;;
316 esac
317 #
318 # First append each name of the script files to a list (this will become
319 # the names of the targets in the Makefile
320 case "${this_script}" in
321 *changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
322 *devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
323 *) boottools="$boottools $this_script" ;;
324 esac
325 #
326 # Grab the name of the target, strip id number and misc words.
327 case $this_script in
328 *kernel) name=linux ;;
329 *bootscripts) name="bootscripts-cross-lfs" ;;
330 *udev-rules) name="udev-cross-lfs" ;;
331 *grub-build) name=grub ;;
332 *-aboot-build) name=aboot ;;
333 *yaboot-build) name=yaboot ;;
334 *colo-build) name=colo ;;
335 *silo-build) name=silo ;;
336 *arcload-build) name=arcload ;;
337 *lilo-build) name=lilo ;;
338 *) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
339 esac
340 # Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
341 pkg_tarball=$(get_package_tarball_name $name)
342
343 #--------------------------------------------------------------------#
344 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
345 #--------------------------------------------------------------------#
346 #
347 # Drop in the name of the target on a new line, and the previous target
348 # as a dependency. Also call the echo_message function.
349 LUSER_wrt_target "${this_script}" "$PREV"
350 #
351 # If $pkg_tarball isn't empty, we've got a package...
352 # Insert instructions for unpacking the package and changing directories
353 #
354 [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
355 [[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
356 #
357 # Select a script execution method
358 case $this_script in
359 # The following 2 scripts are defined in the /boot directory but need
360 # to be run as a root user. Set them up here but run them in another phase
361 *changingowner*) wrt_RunAsRoot "${file}" ;;
362 *devices*) wrt_RunAsRoot "${file}" ;;
363 *fstab*) if [[ -n "$FSTAB" ]]; then
364 LUSER_wrt_CopyFstab
365 else
366 LUSER_wrt_RunAsUser "${file}"
367 fi
368 ;;
369 *) LUSER_wrt_RunAsUser "${file}" ;;
370 esac
371 #
372 # Housekeeping...remove any build directory(ies) except if the package build fails.
373 [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
374 #
375 # Include a touch of the target name so make can check if it's already been made.
376 wrt_touch
377 #
378 #--------------------------------------------------------------------#
379 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
380 #--------------------------------------------------------------------#
381 #
382 # Keep the script file name for Makefile dependencies.
383 PREV=$this_script
384
385 done
386}
387
388
389#--------------------------------------#
390chroot_testsuite_tools_Makefiles() { #
391#--------------------------------------#
392 echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
393
394 for file in testsuite-tools/* ; do
395 # Keep the script file name
396 this_script=`basename $file`
397
398 # First append each name of the script files to a list (this will become
399 # the names of the targets in the Makefile
400 testsuitetools="$testsuitetools $this_script"
401
402 # Grab the name of the target, strip id number, XXX-script
403 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
404 -e 's@-64bit@@' \
405 -e 's@-64@@' \
406 -e 's@64@@' \
407 -e 's@n32@@'`
408
409 pkg_tarball=$(get_package_tarball_name $name)
410
411 #--------------------------------------------------------------------#
412 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
413 #--------------------------------------------------------------------#
414 #
415 # Drop in the name of the target on a new line, and the previous target
416 # as a dependency. Also call the echo_message function.
417 CHROOT_wrt_target "${this_script}" "$PREV"
418 #
419 CHROOT_Unpack "$pkg_tarball"
420 [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
421 #
422 CHROOT_wrt_RunAsRoot "${file}"
423 #
424 CHROOT_wrt_RemoveBuildDirs "${name}"
425 #
426 # Include a touch of the target name so make can check if it's already been made.
427 wrt_touch
428 #
429 #--------------------------------------------------------------------#
430 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
431 #--------------------------------------------------------------------#
432 #
433 # Keep the script file name for Makefile dependencies.
434 PREV=$this_script
435
436 done
437}
438
439#--------------------------------------#
440boot_testsuite_tools_Makefiles() { #
441#--------------------------------------#
442 echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
443 for file in testsuite-tools/* ; do
444 # Keep the script file name
445 this_script=`basename $file`
446
447 # First append each name of the script files to a list (this will become
448 # the names of the targets in the Makefile
449 PREV=
450 testsuitetools="$testsuitetools $this_script"
451
452 # Grab the name of the target, strip id number, XXX-script
453 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
454 -e 's@-64bit@@' \
455 -e 's@-64@@' \
456 -e 's@64@@' \
457 -e 's@n32@@'`
458
459 pkg_tarball=$(get_package_tarball_name $name)
460
461 #--------------------------------------------------------------------#
462 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
463 #--------------------------------------------------------------------#
464 #
465 # Drop in the name of the target on a new line, and the previous target
466 # as a dependency. Also call the echo_message function.
467 CHROOT_wrt_target "${this_script}" "$PREV"
468 #
469 CHROOT_Unpack "$pkg_tarball"
470 [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
471 #
472 CHROOT_wrt_RunAsRoot "${file}"
473 #
474 CHROOT_wrt_RemoveBuildDirs "${name}"
475 #
476 # Include a touch of the target name so make can check if it's already been made.
477 wrt_touch
478 #
479 #--------------------------------------------------------------------#
480 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
481 #--------------------------------------------------------------------#
482 #
483 # Keep the script file name for Makefile dependencies.
484 PREV=$this_script
485
486 done
487
488}
489
490
491#--------------------------------------#
492chroot_final_system_Makefiles() { #
493#--------------------------------------#
494 # Set envars and scripts for iteration targets
495 LOGS="" # Start with an empty global LOGS envar
496 if [[ -z "$1" ]] ; then
497 local N=""
498 else
499 local N=-build_$1
500 local basicsystem=""
501 mkdir final-system$N
502 cp final-system/* final-system$N
503 for script in final-system$N/* ; do
504 # Overwrite existing symlinks, files, and dirs
505 sed -e 's/ln -sv/&f/g' \
506 -e 's/mv -v/&f/g' \
507 -e 's/mkdir -v/&p/g' -i ${script}
508 done
509 # Remove Bzip2 binaries before make install
510 sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2
511 # Delete *old Readline libraries just after make install
512 sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline
513 fi
514
515 echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
516
517 for file in final-system$N/* ; do
518 # Keep the script file name
519 this_script=`basename $file`
520
521 # Test if the stripping phase must be skipped.
522 # Skip alsp temp-perl for iterative runs
523 case $this_script in
524 *stripping*) [[ "$STRIP" = "n" ]] && continue ;;
525 *temp-perl*) [[ -n "$N" ]] && continue ;;
526 esac
527
528 # Grab the name of the target, strip id number, XXX-script
529 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
530 -e 's@temp-@@' \
531 -e 's@-64bit@@' \
532 -e 's@-64@@' \
533 -e 's@64@@' \
534 -e 's@n32@@'`
535
536 # Find the version of the command files, if it corresponds with the building of
537 # a specific package. We need this here to can skip scripts not needed for
538 # iterations rebuilds
539 pkg_tarball=$(get_package_tarball_name $name)
540
541 if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
542 case "${this_script}" in
543 *stripping*) ;;
544 *) continue ;;
545 esac
546 fi
547
548 # Append each name of the script files to a list (this will become
549 # the names of the targets in the Makefile
550 basicsystem="$basicsystem ${this_script}${N}"
551
552 # Append each name of the script files to a list (this will become
553 # the names of the logs to be moved for each iteration)
554 LOGS="$LOGS ${this_script}"
555
556 #--------------------------------------------------------------------#
557 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
558 #--------------------------------------------------------------------#
559 #
560 # Drop in the name of the target on a new line, and the previous target
561 # as a dependency. Also call the echo_message function.
562 CHROOT_wrt_target "${this_script}${N}" "$PREV"
563
564 # If $pkg_tarball isn't empty, we've got a package...
565 if [ "$pkg_tarball" != "" ] ; then
566 CHROOT_Unpack "$pkg_tarball"
567 # If the testsuites must be run, initialize the log file
568 case $name in
569 binutils | gcc | glibc )
570 [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
571 ;;
572 * )
573 [[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
574 ;;
575 esac
576 # If using optimizations, write the instructions
577 [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
578 fi
579 #
580 CHROOT_wrt_RunAsRoot "${file}"
581 #
582 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
583 #
584 # Include a touch of the target name so make can check if it's already been made.
585 wrt_touch
586 #
587 #--------------------------------------------------------------------#
588 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
589 #--------------------------------------------------------------------#
590 #
591 # Keep the script file name for Makefile dependencies.
592 PREV=${this_script}${N}
593 # Set system_build envar for iteration targets
594 system_build=$basicsystem
595 done # for file in final-system/* ...
596}
597
598#--------------------------------------#
599boot_final_system_Makefiles() { #
600#--------------------------------------#
601 # Set envars and scripts for iteration targets
602 LOGS="" # Start with an empty global LOGS envar
603 if [[ -z "$1" ]] ; then
604 local N=""
605 # The makesys phase was initiated in bm_testsuite_tools_makefile
606 [[ "$TEST" = 0 ]] && PREV=""
607 else
608 local N=-build_$1
609 local basicsystem=""
610 mkdir final-system$N
611 cp final-system/* final-system$N
612 for script in final-system$N/* ; do
613 # Overwrite existing symlinks, files, and dirs
614 sed -e 's/ln -sv/&f/g' \
615 -e 's/mv -v/&f/g' \
616 -e 's/mkdir -v/&p/g' -i ${script}
617 done
618 # Remove Bzip2 binaries before make install
619 sed -e 's@make install@rm -vf /usr/bin/bz*\n&@' -i final-system$N/*-bzip2
620 # Delete *old Readline libraries just after make install
621 sed -e 's@make install@&\nrm -v /lib/lib{history,readline}*old@' -i final-system$N/*-readline
622 fi
623
624 echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
625
626 for file in final-system$N/* ; do
627 # Keep the script file name
628 this_script=`basename $file`
629
630 # Test if the stripping phase must be skipped
631 # Skip alsp temp-perl for iterative runs
632 case $this_script in
633 *stripping*) [[ "$STRIP" = "n" ]] && continue ;;
634 *temp-perl*) [[ -n "$N" ]] && continue ;;
635 esac
636
637 # Grab the name of the target, strip id number, XXX-script
638 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
639 -e 's@temp-@@' \
640 -e 's@-64bit@@' \
641 -e 's@-64@@' \
642 -e 's@64@@' \
643 -e 's@n32@@'`
644
645 # Find the version of the command files, if it corresponds with the building of
646 # a specific package. We need this here to can skip scripts not needed for
647 # iterations rebuilds
648
649 pkg_tarball=$(get_package_tarball_name $name)
650
651 if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
652 case "${this_script}" in
653 *stripping*) ;;
654 *) continue ;;
655 esac
656 fi
657
658 # Append each name of the script files to a list (this will become
659 # the names of the targets in the Makefile
660 basicsystem="$basicsystem ${this_script}${N}"
661
662 # Append each name of the script files to a list (this will become
663 # the names of the logs to be moved for each iteration)
664 LOGS="$LOGS ${this_script}"
665
666 #--------------------------------------------------------------------#
667 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
668 #--------------------------------------------------------------------#
669 #
670 # Drop in the name of the target on a new line, and the previous target
671 # as a dependency. Also call the echo_message function.
672 CHROOT_wrt_target "${this_script}${N}" "$PREV"
673
674 # If $pkg_tarball isn't empty, we've got a package...
675 if [ "$pkg_tarball" != "" ] ; then
676 FILE="$pkg_tarball"
677 CHROOT_Unpack "$FILE"
678 # If the testsuites must be run, initialize the log file
679 case $name in
680 binutils | gcc | glibc )
681 [[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
682 ;;
683 * )
684 [[ "$TEST" = "2" ]] || [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
685 ;;
686 esac
687 # If using optimizations, write the instructions
688 [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
689 fi
690 #
691 CHROOT_wrt_RunAsRoot "${file}"
692 #
693 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
694 #
695 # Include a touch of the target name so make can check if it's already been made.
696 wrt_touch
697 #
698 #--------------------------------------------------------------------#
699 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
700 #--------------------------------------------------------------------#
701 #
702 # Keep the script file name for Makefile dependencies.
703 PREV=${this_script}${N}
704 # Set system_build envar for iteration targets
705 system_build=$basicsystem
706 done # for file in final-system/* ...
707
708}
709
710#--------------------------------------#
711chroot_bootscripts_Makefiles() { #
712#--------------------------------------#
713 echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
714
715 for file in bootscripts/* ; do
716 # Keep the script file name
717 this_script=`basename $file`
718
719 case $this_script in
720 *udev) continue ;; # This is not a script but a commentary, we want udev-rules
721 *console*) continue ;; # Use the files that came with the bootscripts
722 *) ;;
723 esac
724
725 # First append each name of the script files to a list (this will become
726 # the names of the targets in the Makefile
727 bootscripttools="$bootscripttools $this_script"
728
729 # Grab the name of the target, strip id number, XXX-script
730 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
731 -e 's@-64bit@@' \
732 -e 's@-64@@' \
733 -e 's@64@@' \
734 -e 's@n32@@'`
735 case $name in
736 *bootscripts*) name=bootscripts-cross-lfs ;;
737 *udev-rules) name=udev-cross-lfs ;;
738 esac
739
740 pkg_tarball=$(get_package_tarball_name $name)
741
742 #--------------------------------------------------------------------#
743 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
744 #--------------------------------------------------------------------#
745 #
746 # Drop in the name of the target on a new line, and the previous target
747 # as a dependency. Also call the echo_message function.
748 CHROOT_wrt_target "${this_script}" "$PREV"
749 #
750 # If $pkg_tarball isn't empty, we've got a package...
751 #
752 [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
753 #
754 CHROOT_wrt_RunAsRoot "${file}"
755 #
756 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
757 #
758 # Include a touch of the target name so make can check if it's already been made.
759 wrt_touch
760 #
761 #--------------------------------------------------------------------#
762 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
763 #--------------------------------------------------------------------#
764 #
765 # Keep the script file name for Makefile dependencies.
766 PREV=$this_script
767
768 done # for file in bootscripts/* ...
769}
770
771#--------------------------------------#
772boot_bootscripts_Makefiles() { #
773#--------------------------------------#
774 echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
775
776 for file in bootscripts/* ; do
777 # Keep the script file name
778 this_script=`basename $file`
779
780 case $this_script in
781 *udev) continue ;; # This is not a script but a commentary
782 *console*) continue ;; # Use the files that came with the bootscripts
783 *) ;;
784 esac
785
786 # First append each name of the script files to a list (this will become
787 # the names of the targets in the Makefile
788 bootscripttools="$bootscripttools $this_script"
789
790 # Grab the name of the target, strip id number, XXX-script
791 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
792 -e 's@-64bit@@' \
793 -e 's@-64@@' \
794 -e 's@64@@' \
795 -e 's@n32@@'`
796 case $name in
797 *bootscripts*) name=bootscripts-cross-lfs ;;
798 *udev-rules) name=udev-cross-lfs ;;
799 esac
800
801 pkg_tarball=$(get_package_tarball_name $name)
802
803 #--------------------------------------------------------------------#
804 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
805 #--------------------------------------------------------------------#
806 #
807 # Drop in the name of the target on a new line, and the previous target
808 # as a dependency. Also call the echo_message function.
809 CHROOT_wrt_target "${this_script}" "$PREV"
810 #
811 # If $pkg_tarball isn't empty, we've got a package...
812 #
813 [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
814 #
815 CHROOT_wrt_RunAsRoot "${file}"
816 #
817 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
818 #
819 # Include a touch of the target name so make can check if it's already been made.
820 wrt_touch
821 #
822 #--------------------------------------------------------------------#
823 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
824 #--------------------------------------------------------------------#
825 #
826 # Keep the script file name for Makefile dependencies.
827 PREV=$this_script
828
829 done # for file in bootscripts/* ...
830}
831
832#--------------------------------------#
833chroot_bootable_Makefiles() { #
834#--------------------------------------#
835 echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
836
837 for file in {bootable,the-end}/* ; do
838 # Keep the script file name
839 this_script=`basename $file`
840
841 # A little housekeeping on the scripts
842 case $this_script in
843 *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;;
844 *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
845 *kernel) # if there is no kernel config file do not build the kernel
846 [[ -z $CONFIG ]] && continue
847 # Copy the config file to /sources with a standardized name
848 cp $CONFIG $BUILDDIR/sources/kernel-config
849 ;;
850 esac
851 #
852 # First append each name of the script files to a list (this will become
853 # the names of the targets in the Makefile
854 bootabletools="$bootabletools $this_script"
855 #
856 # Grab the name of the target, strip id number and misc words.
857 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
858 case $this_script in
859 *kernel*) name=linux
860 ;;
861 esac
862
863 pkg_tarball=$(get_package_tarball_name $name)
864
865 #--------------------------------------------------------------------#
866 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
867 #--------------------------------------------------------------------#
868 #
869 # Drop in the name of the target on a new line, and the previous target
870 # as a dependency. Also call the echo_message function.
871 CHROOT_wrt_target "${this_script}" "$PREV"
872 #
873 # If $pkg_tarball isn't empty, we've got a package...
874 # Insert instructions for unpacking the package and changing directories
875 #
876 [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
877 #
878 # Select a script execution method
879 case $this_script in
880 *fstab*) if [[ -n "$FSTAB" ]]; then
881 CHROOT_wrt_CopyFstab
882 else
883 CHROOT_wrt_RunAsRoot "${file}"
884 fi
885 ;;
886 *) CHROOT_wrt_RunAsRoot "${file}"
887 ;;
888 esac
889 #
890 # Housekeeping...remove any build directory(ies) except if the package build fails.
891 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
892 #
893 # Include a touch of the target name so make can check if it's already been made.
894 wrt_touch
895 #
896 #--------------------------------------------------------------------#
897 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
898 #--------------------------------------------------------------------#
899 #
900 # Keep the script file name for Makefile dependencies.
901 PREV=$this_script
902
903 done
904
905}
906
907#--------------------------------------#
908boot_bootable_Makefiles() { #
909#--------------------------------------#
910 echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
911
912 for file in {bootable,the-end}/* ; do
913 # Keep the script file name
914 this_script=`basename $file`
915
916 # A little housekeeping on the scripts
917 case $this_script in
918 *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;;
919 *kernel) # if there is no kernel config file do not build the kernel
920 [[ -z $CONFIG ]] && continue
921 # Copy the named config file to /sources with a standardized name
922 cp $CONFIG $BUILDDIR/sources/kernel-config
923 ;;
924 esac
925 #
926 # First append each name of the script files to a list (this will become
927 # the names of the targets in the Makefile
928 bootabletools="$bootabletools $this_script"
929 #
930 # Grab the name of the target, strip id number and misc words.
931 case $this_script in
932 *kernel) name=linux ;;
933 *) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
934 esac
935
936 pkg_tarball=$(get_package_tarball_name $name)
937
938 #--------------------------------------------------------------------#
939 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
940 #--------------------------------------------------------------------#
941 #
942 # Drop in the name of the target on a new line, and the previous target
943 # as a dependency. Also call the echo_message function.
944 CHROOT_wrt_target "${this_script}" "$PREV"
945 #
946 # If $pkg_tarball isn't empty, we've got a package...
947 # Insert instructions for unpacking the package and changing directories
948 #
949 [[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
950 #
951 # Select a script execution method
952 case $this_script in
953 *fstab*) if [[ -n "$FSTAB" ]]; then
954 # Minimal boot mode has no access to original file, store in /sources
955 cp $FSTAB $BUILDDIR/sources/fstab
956 CHROOT_wrt_CopyFstab
957 else
958 CHROOT_wrt_RunAsRoot "${file}"
959 fi
960 ;;
961 *) CHROOT_wrt_RunAsRoot "${file}" ;;
962 esac
963 #
964 # Housekeeping...remove any build directory(ies) except if the package build fails.
965 [[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
966 #
967 # Include a touch of the target name so make can check if it's already been made.
968 wrt_touch
969 #
970 #--------------------------------------------------------------------#
971 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
972 #--------------------------------------------------------------------#
973 #
974 # Keep the script file name for Makefile dependencies.
975 PREV=$this_script
976 done
977
978}
979
980
981#--------------------------------------#
982build_Makefile() { # Construct a Makefile from the book scripts
983#--------------------------------------#
984 #
985 # Script crashes if error trapping is on
986 #
987set +e
988 declare -f method_cmds
989 declare -f testsuite_cmds
990 declare -f final_sys_cmds
991 declare -f bootscripts_cmds
992 declare -f bootable_cmds
993set -e
994
995 echo "...Creating Makefile... ${BOLD}START${OFF}"
996
997 cd $JHALFSDIR/${PROGNAME}-commands
998 # Start with a clean files
999 >$MKFILE
1000 >$MKFILE.tmp
1001
1002 method_cmds=${METHOD}_Makefiles
1003 testsuite_cmds=${METHOD}_testsuite_tools_Makefiles
1004 final_sys_cmds=${METHOD}_final_system_Makefiles
1005 bootscripts_cmds=${METHOD}_bootscripts_Makefiles
1006 bootable_cmds=${METHOD}_bootable_Makefiles
1007
1008 host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
1009 cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
1010 temptools_Makefiles # mk_TEMP (LUSER) $temptools
1011 $method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1012 if [[ ! $TEST = "0" ]]; then
1013 $testsuite_cmds # mk_SYSTOOLS (CHROOT) $testsuitetools
1014 fi
1015 $final_sys_cmds # mk_FINAL (CHROOT) $basicsystem
1016 # Add the iterations targets, if needed
1017 [[ "$COMPARE" = "y" ]] && wrt_compare_targets
1018 $bootscripts_cmds # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1019 $bootable_cmds # mk_BOOTABLE (CHROOT) $bootabletools
1020
1021 # Add the BLFS_TOOL targets, if needed
1022 [[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
1023
1024 # Add a header, some variables and include the function file
1025 # to the top of the real Makefile.
1026 wrt_Makefile_header
1027
1028 # Add chroot commands
1029 if [ "$METHOD" = "chroot" ] ; then
1030 CHROOT_LOC="`whereis -b chroot | cut -d " " -f2`"
1031 chroot=`cat chroot/*chroot* | \
1032 sed -e "s@chroot@$CHROOT_LOC@" \
1033 -e '/#!\/tools\/bin\/bash/d' \
1034 -e '/^export/d' \
1035 -e '/^logout/d' \
1036 -e 's@ \\\@ @g' | \
1037 tr -d '\n' | \
1038 sed -e 's/ */ /g' \
1039 -e 's|\\$|&&|g' \
1040 -e 's|exit||g' \
1041 -e 's|$| -c|' \
1042 -e 's|"$${CLFS}"|$(MOUNT_PT)|'\
1043 -e 's|set -e||'`
1044 echo -e "CHROOT1= $chroot\n" >> $MKFILE
1045 fi
1046
1047################## CHROOT ####################
1048
1049if [[ "${METHOD}" = "chroot" ]]; then
1050(
1051cat << EOF
1052
1053all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_BLFS_TOOL
1054 @sudo make do-housekeeping
1055 @\$(call echo_finished,$VERSION)
1056
1057ck_UID:
1058 @if [ \`id -u\` = "0" ]; then \\
1059 echo "+--------------------------------------------------+"; \\
1060 echo "|You cannot run this makefile from the root account|"; \\
1061 echo "+--------------------------------------------------+"; \\
1062 exit 1; \\
1063 fi
1064
1065#---------------AS ROOT
1066mk_SETUP:
1067 @\$(call echo_SU_request)
1068 @sudo make SHELL=/bin/bash SETUP
1069 @touch \$@
1070
1071#---------------AS LUSER
1072mk_CROSS: mk_SETUP
1073 @\$(call echo_PHASE,Cross and Temporary Tools)
1074 @(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
1075 @sudo make restore-luser-env
1076 @touch \$@
1077
1078mk_SUDO: mk_CROSS
1079 @sudo make SHELL=/bin/bash SUDO
1080 @touch \$@
1081#
1082# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
1083# chroot environment. (Unless someone knows a different way)
1084# Manually create the /bin directory and provide link to the /tools dir.
1085# Also change the original symlink creation to include (f)orce to prevent failure due to
1086# pre-existing links.
1087
1088#---------------CHROOT JAIL
1089mk_SYSTOOLS: mk_SUDO
1090 @if [ ! -e \$(MOUNT_PT)/bin ]; then \\
1091 mkdir \$(MOUNT_PT)/bin; \\
1092 cd \$(MOUNT_PT)/bin && \\
1093 ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
1094 sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
1095 fi;
1096 @sudo sed -e 's|^ln -sv |ln -svf |' -i \$(CMDSDIR)/chroot/*-createfiles
1097 @\$(call echo_CHROOT_request)
1098 @\$(call echo_PHASE, CHROOT JAIL )
1099 @( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
1100 @touch \$@
1101
1102mk_BLFS_TOOL: create-sbu_du-report
1103 @\$(call echo_PHASE,Building BLFS-TOOLS)
1104 @if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1105 sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
1106 sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
1107 fi;
1108 @touch \$@
1109
1110SETUP: $host_prep
1111AS_LUSER: $cross_tools $temptools
1112SUDO: $orphan_scripts
1113CHROOT_JAIL: ${chroottools}${boottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
1114BLFS_TOOL: $blfs_tool
1115
1116
1117create-sbu_du-report: mk_SYSTOOLS
1118 @\$(call echo_message, Building)
1119 @if [ "\$(ADD_REPORT)" = "y" ]; then \\
1120 ./create-sbu_du-report.sh logs $VERSION; \\
1121 \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1122 fi;
1123 @touch \$@
1124
1125do-housekeeping:
1126 @-umount \$(MOUNT_PT)/dev/pts
1127 @-umount \$(MOUNT_PT)/dev/shm
1128 @-umount \$(MOUNT_PT)/dev
1129 @-umount \$(MOUNT_PT)/sys
1130 @-umount \$(MOUNT_PT)/proc
1131 @-rm /tools /cross-tools
1132 @-if [ ! -f luser-exist ]; then \\
1133 userdel \$(LUSER); \\
1134 rm -rf /home/\$(LUSER); \\
1135 fi;
1136
1137EOF
1138) >> $MKFILE
1139
1140fi
1141
1142################### BOOT #####################
1143
1144if [[ "${METHOD}" = "boot" ]]; then
1145(
1146cat << EOF
1147
1148all: ck_UID mk_SETUP mk_CROSS mk_SUDO
1149 @sudo make restore-luser-env
1150 @sudo make do-housekeeping
1151 @\$(call echo_boot_finished,$VERSION)
1152
1153makesys: mk_FINAL mk_BLFS_TOOL
1154 @\$(call echo_finished,$VERSION)
1155
1156
1157ck_UID:
1158 @if [ \`id -u\` = "0" ]; then \\
1159 echo "+--------------------------------------------------+"; \\
1160 echo "|You cannot run this makefile from the root account|"; \\
1161 echo "|However, if this is the boot environment |"; \\
1162 echo "| the command you are looking for is |"; \\
1163 echo "| make makesys |"; \\
1164 echo "| to finish off the build |"; \\
1165 echo "+--------------------------------------------------+"; \\
1166 exit 1; \\
1167 fi
1168
1169#---------------AS ROOT
1170
1171mk_SETUP:
1172 @\$(call echo_SU_request)
1173 @sudo make SETUP
1174 @touch \$@
1175
1176#---------------AS LUSER
1177
1178mk_CROSS: mk_SETUP
1179 @\$(call echo_PHASE,Cross Tool)
1180 @(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
1181 @touch \$@
1182
1183mk_SUDO: mk_CROSS
1184 @sudo make SHELL=/bin/bash SUDO
1185 @touch \$@
1186
1187#---------------AS ROOT
1188
1189mk_FINAL:
1190 @\$(call echo_PHASE,Final System)
1191 @( make AS_ROOT )
1192 @touch \$@
1193
1194mk_BLFS_TOOL: mk_FINAL
1195 @\$(call echo_PHASE,Building BLFS-TOOLS)
1196 @if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1197 mkdir -p $TRACKING_DIR; \\
1198 make BLFS_TOOL; \\
1199 fi
1200 @touch \$@
1201
1202SETUP: $host_prep
1203AS_LUSER: $cross_tools $temptools ${chroottools}${boottools}
1204SUDO: $orphan_scripts
1205AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1206BLFS_TOOL: $blfs_tool
1207
1208do-housekeeping:
1209 @-rm /tools /cross-tools
1210 @-if [ ! -f luser-exist ]; then \\
1211 userdel \$(LUSER); \\
1212 rm -rf /home/\$(LUSER); \\
1213 fi;
1214
1215EOF
1216) >> $MKFILE
1217fi
1218
1219(
1220 cat << EOF
1221
1222restore-luser-env:
1223 @\$(call echo_message, Building)
1224 @if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
1225 mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
1226 fi;
1227 @if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
1228 mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
1229 fi;
1230 @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
1231 touch \$@ && \\
1232 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1233 echo --------------------------------------------------------------------------------\$(WHITE)
1234
1235########################################################
1236
1237
1238EOF
1239) >> $MKFILE
1240
1241 # Bring over the items from the Makefile.tmp
1242 cat $MKFILE.tmp >> $MKFILE
1243 rm $MKFILE.tmp
1244
1245 echo "Creating Makefile... ${BOLD}DONE${OFF}"
1246}
Note: See TracBrowser for help on using the repository browser.