Context Navigation

source: CLFS/master.sh@ 2af991d

2.4 ablfs-more legacy new_features trunk

Last change on this file since 2af991d was f0de954, checked in by Pierre Labastie <pierre@…>, 10 years ago
CLFS puts fstab in config and not anymore in bootable. Thanks to Chris Staub for the report.
Property mode set to `100644`
File size: 43.1 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@install -dv \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@install -dv \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
38	mkdir -pv \$(LUSER_HOME); \\
39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
40	else \\
41	touch luser-exist; \\
42	fi
43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
46	chmod a+wt \$(SRCSDIR)
47	@\$(call housekeeping)
48
49	026-settingenvironment: 025-addinguser
50	@\$(call echo_message, Building)
51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
53	fi
54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
56	fi;
57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
67	EOF
68	) >> $MKFILE.tmp
69	if ! [ -e final-preps/*variables ]; then
70	(
71	cat << EOF
72	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
73	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
74	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
75	EOF
76	) >> $MKFILE.tmp
77	fi
78	(
79	cat << EOF
80	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
81	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
82	chmod a+wt \$(MOUNT_PT) && \\
83	if [ -d \$(MOUNT_PT)/var ]; then \\
84	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
85	fi && \\
86	touch envars && \\
87	chown \$(LUSER):\$(LGROUP) envars
88	@\$(call housekeeping)
89	EOF
90	) >> $MKFILE.tmp
91	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
92
93	}
94
95	#--------------------------------------#
96	final_preps_Makefiles() {
97	#--------------------------------------#
98	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
99	for file in final-preps/* ; do
100	this_script=`basename $file`
101	case $this_script in
102	*variables )
103	;;
104	*) continue; ;;
105	esac
106	# Set the dependency for the first target.
107	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
108
109	# First append each name of the script files to a list (this will become
110	# the names of the targets in the Makefile
111	final_preps="$final_preps $this_script"
112
113	# No need to grab the package name
114
115	LUSER_wrt_target "${this_script}" "$PREV"
116	LUSER_wrt_RunAsUser "${file}"
117	wrt_touch
118	PREV=$this_script
119	done # for file in ....
120	}
121
122	#--------------------------------------#
123	cross_tools_Makefiles() { #
124	#--------------------------------------#
125	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
126
127	for file in cross-tools/* ; do
128	# Keep the script file name
129	this_script=`basename $file`
130	#
131	# Skip this script...
132	case $this_script in
133	cflags \| variables ) # work done in host_prep_Makefiles
134	continue; ;;
135	*) ;;
136	esac
137	#
138	# Set the dependency for the first target.
139	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
140
141	# First append each name of the script files to a list (this will become
142	# the names of the targets in the Makefile
143	cross_tools="$cross_tools $this_script"
144
145	# Grab the name of the target (minus the -headers or -cross in the case of gcc
146	# and binutils in chapter 5)
147	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
148	-e 's@-static@@' \
149	-e 's@-final@@' \
150	-e 's@-64@@' \
151	-e 's@-n32@@'`
152	pkg_tarball=$(get_package_tarball_name $name)
153
154	#--------------------------------------------------------------------#
155	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
156	#--------------------------------------------------------------------#
157	#
158	# Drop in the name of the target on a new line, and the previous target
159	# as a dependency. Also call the echo_message function.
160	LUSER_wrt_target "${this_script}" "$PREV"
161	#
162	# If $pkg_tarball isn't empty, we've got a package...
163	#
164	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
165	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
166	#
167	LUSER_wrt_RunAsUser "${file}"
168	#
169	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
170	#
171	# Include a touch of the target name so make can check if it's already been made.
172	wrt_touch
173	#
174	#--------------------------------------------------------------------#
175	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
176	#--------------------------------------------------------------------#
177	#
178	# Keep the script file name for Makefile dependencies.
179	PREV=$this_script
180
181	done # for file in ....
182	}
183
184	#--------------------------------------#
185	temptools_Makefiles() { #
186	#--------------------------------------#
187	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
188
189	for file in temp-system/* ; do
190	# Keep the script file name
191	this_script=`basename $file`
192	#
193	# Deal with any odd scripts..
194	case $this_script in
195	*choose) # The choose script will fail if you cannot enter the new environment
196	# If the 'boot' build method was chosen don't run the script
197	[[ $METHOD = "boot" ]] && continue; ;;
198	*) ;;
199	esac
200
201	#
202	# First append each name of the script files to a list (this will become
203	# the names of the targets in the Makefile
204	temptools="$temptools $this_script"
205
206	#
207	# Grab the name of the target, strip id number, XXX-script
208	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
209	#
210	pkg_tarball=$(get_package_tarball_name $name)
211
212	#--------------------------------------------------------------------#
213	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
214	#--------------------------------------------------------------------#
215	#
216	# Drop in the name of the target on a new line, and the previous target
217	# as a dependency. Also call the echo_message function.
218	LUSER_wrt_target "${this_script}" "$PREV"
219	#
220	# If $pkg_tarball isn't empty, we've got a package...
221	# Insert instructions for unpacking the package and to set the PKGDIR variable.
222	#
223	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
224	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
225	#
226	LUSER_wrt_RunAsUser "${file}"
227	#
228	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
229	#
230	# Include a touch of the target name so make can check if it's already been made.
231	wrt_touch
232	#
233	#--------------------------------------------------------------------#
234	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
235	#--------------------------------------------------------------------#
236	#
237	# Keep the script file name for Makefile dependencies.
238	PREV=$this_script
239	done # for file in ....
240	}
241
242
243	#--------------------------------------#
244	chroot_Makefiles() { #
245	#--------------------------------------#
246	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
247
248	for file in chroot/* ; do
249	# Keep the script file name
250	this_script=`basename $file`
251	#
252	# Skipping scripts is done now and not included in the build tree.
253	case $this_script in
254	chroot) continue ;;
255	esac
256
257	#
258	# First append each name of the script files to a list (this will become
259	# the names of the targets in the Makefile
260	case "${this_script}" in
261	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
262	*) chroottools="$chroottools $this_script" ;;
263	esac
264
265	# Grab the name of the target, strip id number, XXX-script
266	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
267
268	pkg_tarball=$(get_package_tarball_name $name)
269
270	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
271	# Same for e2fsprogs (in CLFS 1.1.0)
272	# .. Customized makefile entry
273	case "${this_script}" in
274	*util-linux)
275	LUSER_wrt_target "${this_script}" "$PREV"
276	LUSER_wrt_unpack "$pkg_tarball"
277	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
278	LUSER_wrt_RunAsUser "${file}"
279	LUSER_RemoveBuildDirs "${name}"
280	wrt_touch
281	temptools="$temptools $this_script"
282	continue ;;
283	*util-linux-ng)
284	LUSER_wrt_target "${this_script}" "$PREV"
285	LUSER_wrt_unpack "$pkg_tarball"
286	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
287	LUSER_wrt_RunAsUser "${file}"
288	LUSER_RemoveBuildDirs "${name}"
289	wrt_touch
290	temptools="$temptools $this_script"
291	continue ;;
292	*util-linux-libs)
293	LUSER_wrt_target "${this_script}" "$PREV"
294	LUSER_wrt_unpack "$pkg_tarball"
295	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
296	LUSER_wrt_RunAsUser "${file}"
297	LUSER_RemoveBuildDirs "${name}"
298	wrt_touch
299	temptools="$temptools $this_script"
300	continue ;;
301	*e2fsprogs)
302	LUSER_wrt_target "${this_script}" "$PREV"
303	LUSER_wrt_unpack "$pkg_tarball"
304	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
305	LUSER_wrt_RunAsUser "${file}"
306	LUSER_RemoveBuildDirs "${name}"
307	wrt_touch
308	temptools="$temptools $this_script"
309	continue ;;
310	*e2fsprogs-libs)
311	LUSER_wrt_target "${this_script}" "$PREV"
312	LUSER_wrt_unpack "$pkg_tarball"
313	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
314	LUSER_wrt_RunAsUser "${file}"
315	LUSER_RemoveBuildDirs "${name}"
316	wrt_touch
317	temptools="$temptools $this_script"
318	continue ;;
319	esac
320
321
322	#--------------------------------------------------------------------#
323	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
324	#--------------------------------------------------------------------#
325	#
326	# Drop in the name of the target on a new line, and the previous target
327	# as a dependency. Also call the echo_message function.
328	CHROOT_wrt_target "${this_script}" "$PREV"
329	#
330	# If $pkg_tarball isn't empty, we've got a package...
331	# Insert instructions for unpacking the package and changing directories
332	#
333	if [ "$pkg_tarball" != "" ] ; then
334	CHROOT_Unpack "$pkg_tarball"
335	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
336	fi
337	#
338	# Select a script execution method
339	case $this_script in
340	*kernfs) wrt_RunAsRoot "${file}" ;;
341	*) CHROOT_wrt_RunAsRoot "${file}" ;;
342	esac
343	#
344	# Housekeeping...remove the build directory(ies), except if the package build fails.
345	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
346	#
347	# Include a touch of the target name so make can check if it's already been made.
348	wrt_touch
349	#
350	#--------------------------------------------------------------------#
351	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
352	#--------------------------------------------------------------------#
353	#
354	# Keep the script file name for Makefile dependencies.
355	PREV=$this_script
356
357	done # for file in...
358	}
359
360
361	#--------------------------------------#
362	boot_Makefiles() { #
363	#--------------------------------------#
364
365	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
366	#
367	# Create a target bootable partition containing a compile environment. Later
368	# on we boot into this environment and contine the build.
369	#
370	for file in boot/* ; do
371	# Keep the script file name
372	this_script=`basename $file`
373
374	# A little housekeeping on the scripts
375	case $this_script in
376	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
377	how-to-view) continue ;;
378	whatnext) continue ;;
379	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
380	*kernel) # if there is no kernel config file do not build the kernel
381	[[ -z $CONFIG ]] && continue
382	# Copy the config file to /sources with a standardized name
383	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
384	;;
385	esac
386	#
387	# First append each name of the script files to a list (this will become
388	# the names of the targets in the Makefile). Those names differ depending
389	# on the version of the book. What makes the difference between those
390	# versions is the presence of "how-to-view" in the boot chapter.
391	if [ -f boot/*how-to-view ]; then
392	case "${this_script}" in
393	*changingowner)
394	orphan_scripts="${orphan_scripts} ${this_script}"
395	;;
396	*creatingdirs)
397	orphan_scripts="${orphan_scripts} ${this_script}"
398	;;
399	*createfiles)
400	orphan_scripts="${orphan_scripts} ${this_script}"
401	;;
402	*devices)
403	orphan_scripts="${orphan_scripts} ${this_script}"
404	;;
405	*flags)
406	orphan_scripts="${orphan_scripts} ${this_script}"
407	;;
408	*fstab)
409	orphan_scripts="${orphan_scripts} ${this_script}"
410	;;
411	*pwdgroup)
412	orphan_scripts="${orphan_scripts} ${this_script}"
413	;;
414	*settingenvironment)
415	orphan_scripts="${orphan_scripts} ${this_script}"
416	;;
417	*)
418	boottools="$boottools $this_script"
419	;;
420	esac
421	else
422	case "${this_script}" in
423	*changingowner)
424	orphan_scripts="${orphan_scripts} ${this_script}"
425	;;
426	*devices)
427	orphan_scripts="${orphan_scripts} ${this_script}"
428	;;
429	*)
430	boottools="$boottools $this_script"
431	;;
432	esac
433	fi
434	#
435	# Grab the name of the target, strip id number and misc words.
436	case $this_script in
437	*kernel) name=linux ;;
438	*bootscripts) name="bootscripts-cross-lfs" ;;
439	*boot-scripts) name="boot-scripts-cross-lfs" ;;
440	*udev-rules) name="udev-cross-lfs" ;;
441	*grub-build) name=grub ;;
442	*-aboot-build) name=aboot ;;
443	*yaboot-build) name=yaboot ;;
444	*colo-build) name=colo ;;
445	*silo-build) name=silo ;;
446	*arcload-build) name=arcload ;;
447	*lilo-build) name=lilo ;;
448	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
449	esac
450	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
451	pkg_tarball=$(get_package_tarball_name $name)
452
453	#--------------------------------------------------------------------#
454	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
455	#--------------------------------------------------------------------#
456	#
457	# Drop in the name of the target on a new line, and the previous target
458	# as a dependency. Also call the echo_message function.
459	LUSER_wrt_target "${this_script}" "$PREV"
460	#
461	# If $pkg_tarball isn't empty, we've got a package...
462	# Insert instructions for unpacking the package and changing directories
463	#
464	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
465	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
466	#
467	# Select a script execution method
468	if [ -f boot/*how-to-view ]; then
469	case $this_script in
470	# The following 8 scripts are defined in the /boot directory but need
471	# to be run as a root user. Set them up here but run them in another
472	# phase
473	*changingowner) wrt_RunAsRoot "${file}" ;;
474	*creatingdirs) wrt_RunAsRoot "${file}" ;;
475	*createfiles) wrt_RunAsRoot "${file}" ;;
476	*devices) wrt_RunAsRoot "${file}" ;;
477	*flags) wrt_RunAsRoot "${file}" ;;
478	*fstab)
479	if [[ -n "$FSTAB" ]]; then
480	LUSER_wrt_CopyFstab
481	else
482	wrt_RunAsRoot "${file}"
483	fi
484	;;
485	*pwdgroup) wrt_RunAsRoot "${file}" ;;
486	*settingenvironment) wrt_RunAsRoot "${file}" ;;
487	*) LUSER_wrt_RunAsUser "${file}" ;;
488	esac
489	else
490	case $this_script in
491	# The following 2 scripts are defined in the /boot directory but need
492	# to be run as a root user. Set them up here but run them in another
493	# phase
494	*changingowner) wrt_RunAsRoot "${file}" ;;
495	*devices) wrt_RunAsRoot "${file}" ;;
496	*fstab)
497	if [[ -n "$FSTAB" ]]; then
498	LUSER_wrt_CopyFstab
499	else
500	LUSER_wrt_RunAsUser "${file}"
501	fi
502	;;
503	*) LUSER_wrt_RunAsUser "${file}" ;;
504	esac
505	fi
506	#
507	# Housekeeping...remove any build directory(ies) except if the package build fails.
508	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
509	#
510	# Include a touch of the target name so make can check if it's already been made.
511	wrt_touch
512	#
513	#--------------------------------------------------------------------#
514	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
515	#--------------------------------------------------------------------#
516	#
517	# Keep the script file name for Makefile dependencies.
518	PREV=$this_script
519
520	done
521	}
522
523
524	#--------------------------------------#
525	testsuite_tools_Makefiles() { #
526	#--------------------------------------#
527
528	if [[ "${METHOD}" = "chroot" ]]; then
529	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
530	else
531	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
532	PREV=""
533	fi
534
535	for file in testsuite-tools/* ; do
536	# Keep the script file name
537	this_script=`basename $file`
538
539	# First append each name of the script files to a list (this will become
540	# the names of the targets in the Makefile
541	testsuitetools="$testsuitetools $this_script"
542
543	# Grab the name of the target, strip id number, XXX-script
544	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
545	-e 's@-64bit@@' \
546	-e 's@-64@@' \
547	-e 's@64@@' \
548	-e 's@n32@@'`
549
550	pkg_tarball=$(get_package_tarball_name $name)
551
552	#--------------------------------------------------------------------#
553	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
554	#--------------------------------------------------------------------#
555	#
556	# Drop in the name of the target on a new line, and the previous target
557	# as a dependency. Also call the echo_message function.
558	CHROOT_wrt_target "${this_script}" "$PREV"
559	#
560	CHROOT_Unpack "$pkg_tarball"
561	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
562	#
563	CHROOT_wrt_RunAsRoot "${file}"
564	#
565	CHROOT_wrt_RemoveBuildDirs "${name}"
566	#
567	# Include a touch of the target name so make can check if it's already been made.
568	wrt_touch
569	#
570	#--------------------------------------------------------------------#
571	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
572	#--------------------------------------------------------------------#
573	#
574	# Keep the script file name for Makefile dependencies.
575	PREV=$this_script
576
577	done
578	}
579
580
581	#--------------------------------------#
582	final_system_Makefiles() { #
583	#--------------------------------------#
584	# Set envars and scripts for iteration targets
585	if [[ -z "$1" ]] ; then
586	local N=""
587	# In boot method the makesys phase was initiated in testsuite_tools_makefile
588	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
589	else
590	local N=-build_$1
591	local basicsystem=""
592	mkdir final-system$N
593	cp final-system/* final-system$N
594	for script in final-system$N/* ; do
595	# Overwrite existing symlinks, files, and dirs
596	sed -e 's/ln -sv/&f/g' \
597	-e 's/mv -v/&f/g' \
598	-e 's/mkdir -v/&p/g' -i ${script}
599	# Rename the scripts
600	mv ${script} ${script}$N
601	done
602	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
603	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
604	# Delete *old Readline libraries just after make install
605	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
606	fi
607
608	if [[ "${METHOD}" = "chroot" ]]; then
609	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
610	else
611	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
612	fi
613
614	for file in final-system$N/* ; do
615	# Keep the script file name
616	this_script=`basename $file`
617
618	# Test if the stripping phase must be skipped.
619	# Skip also temp-perl for iterative runs
620	case $this_script in
621	stripping) [[ "$STRIP" = "n" ]] && continue ;;
622	temp-perl) [[ -n "$N" ]] && continue ;;
623	esac
624
625	# Grab the name of the target, strip id number, XXX-script.
626	# name1 is partially stripped and should be used for logging files.
627	# name is completely stripped and is used for grabbing
628	# the package name.
629	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
630	-e 's,'$N',,'`
631	name=`echo $name1 \| sed -e 's@temp-@@' \
632	-e 's@-64bit@@' \
633	-e 's@-64@@' \
634	-e 's@64@@' \
635	-e 's@n32@@'`
636
637	# Find the version of the command files, if it corresponds with the building of
638	# a specific package. We need this here to can skip scripts not needed for
639	# iterations rebuilds
640	pkg_tarball=$(get_package_tarball_name $name)
641
642	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
643	case "${this_script}" in
644	stripping) ;;
645	*) continue ;;
646	esac
647	fi
648
649	# Append each name of the script files to a list (this will become
650	# the names of the targets in the Makefile
651	basicsystem="$basicsystem ${this_script}"
652
653	#--------------------------------------------------------------------#
654	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
655	#--------------------------------------------------------------------#
656	#
657	# Drop in the name of the target on a new line, and the previous target
658	# as a dependency. Also call the echo_message function.
659	CHROOT_wrt_target "${this_script}" "$PREV"
660
661	# If $pkg_tarball isn't empty, we've got a package...
662	if [ "$pkg_tarball" != "" ] ; then
663	# Touch timestamp file if installed files logs will be created.
664	# But only for the firt build when running iterative builds.
665	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
666	CHROOT_wrt_TouchTimestamp
667	fi
668	CHROOT_Unpack "$pkg_tarball"
669	# If the testsuites must be run, initialize the log file
670	case $name in
671	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
672	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
673	;;
674	* )
675	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
676	;;
677	esac
678	# If using optimizations, write the instructions
679	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
680	fi
681	#
682	CHROOT_wrt_RunAsRoot "${file}"
683	#
684	# Write installed files log and remove the build directory(ies)
685	# except if the package build fails.
686	if [ "$pkg_tarball" != "" ] ; then
687	CHROOT_wrt_RemoveBuildDirs "$name"
688	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
689	CHROOT_wrt_LogNewFiles "$name1"
690	fi
691	fi
692	#
693	# Include a touch of the target name so make can check
694	# if it's already been made.
695	wrt_touch
696	#
697	#--------------------------------------------------------------------#
698	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
699	#--------------------------------------------------------------------#
700	#
701	# Keep the script file name for Makefile dependencies.
702	PREV=${this_script}
703	# Set system_build envar for iteration targets
704	system_build=$basicsystem
705	done # for file in final-system/* ...
706	}
707
708	#--------------------------------------#
709	bootscripts_Makefiles() { #
710	#--------------------------------------#
711
712	# New versions of the book do not have bootscripts anymore
713	# (use systemd configuration files)
714	# Define a variable to be used for the right script directory to parse
715	if [ -d bootscripts ]; then
716	config="bootscripts"
717	else
718	config="system-config"
719	fi
720
721	if [[ "${METHOD}" = "chroot" ]]; then
722	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
723	else
724	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
725	fi
726
727	for file in $config/* ; do
728	# Keep the script file name
729	this_script=`basename $file`
730
731	case $this_script in
732	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
733	console) continue ;; # Use the files that came with the bootscripts
734	# fstab is now here (for 3.x.y)
735	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
736	*) ;;
737	esac
738
739	# First append each name of the script files to a list (this will become
740	# the names of the targets in the Makefile
741	bootscripttools="$bootscripttools $this_script"
742
743	# Grab the name of the target, strip id number, XXX-script.
744	# name1 is partially stripped and should be used for logging files.
745	# name is completely stripped and is used for grabbing
746	# the package name.
747	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
748	name=`echo $name1 \| sed -e 's@-64bit@@' \
749	-e 's@-64@@' \
750	-e 's@64@@' \
751	-e 's@n32@@'`
752	case $name in
753	bootscripts) name=bootscripts-cross-lfs ;;
754	*udev-rules) name=udev-cross-lfs ;;
755	esac
756
757	pkg_tarball=$(get_package_tarball_name $name)
758
759	#--------------------------------------------------------------------#
760	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
761	#--------------------------------------------------------------------#
762	#
763	# Drop in the name of the target on a new line, and the previous target
764	# as a dependency. Also call the echo_message function.
765	CHROOT_wrt_target "${this_script}" "$PREV"
766	#
767	# If $pkg_tarball isn't empty, we've got a package...
768	#
769	if [ "$pkg_tarball" != "" ] ; then
770	if [ "${INSTALL_LOG}" = "y" ] ; then
771	CHROOT_wrt_TouchTimestamp
772	fi
773	CHROOT_Unpack "$pkg_tarball"
774	fi
775	#
776	case $this_script in
777	fstab) if [[ -n "$FSTAB" ]]; then
778	CHROOT_wrt_CopyFstab
779	else
780	CHROOT_wrt_RunAsRoot "${file}"
781	fi
782	;;
783	*) CHROOT_wrt_RunAsRoot "${file}"
784	;;
785	esac
786	#
787	# Write installed files log and remove the build directory(ies)
788	# except if the package build fails.
789	if [ "$pkg_tarball" != "" ] ; then
790	CHROOT_wrt_RemoveBuildDirs "$name"
791	if [ "${INSTALL_LOG}" = "y" ] ; then
792	CHROOT_wrt_LogNewFiles "$name1"
793	fi
794	fi
795	#
796	# Include a touch of the target name so make can check if it's already been made.
797	wrt_touch
798	#
799	#--------------------------------------------------------------------#
800	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
801	#--------------------------------------------------------------------#
802	#
803	# Keep the script file name for Makefile dependencies.
804	PREV=$this_script
805
806	done # for file in bootscripts/* ...
807	}
808
809	#--------------------------------------#
810	network_Makefiles() { #
811	#--------------------------------------#
812
813	if [[ "${METHOD}" = "chroot" ]]; then
814	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
815	else
816	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
817	fi
818
819	for file in network/* ; do
820	# Keep the script file name
821	this_script=`basename $file`
822
823	case $this_script in
824	*choose) continue ;; # This is not a script but a commentary.
825	*dhcp) continue ;; # Assume static networking.
826	*dhcpcd) continue ;; # Assume static networking.
827	*) ;;
828	esac
829
830	# First append each name of the script files to a list (this will become
831	# the names of the targets in the Makefile
832	networktools="$networktools $this_script"
833
834	# Grab the name of the target, strip id number, XXX-script
835	# name1 is partially stripped and should be used for logging files.
836	# name is completely stripped and is used for grabbing
837	# the package name.
838	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
839	name=`echo $name1 \| sed -e 's@-64bit@@' \
840	-e 's@-64@@' \
841	-e 's@64@@' \
842	-e 's@n32@@'`
843	case $name in
844	network-scripts) name=clfs-network-scripts ;;
845	esac
846
847	pkg_tarball=$(get_package_tarball_name $name)
848
849	#--------------------------------------------------------------------#
850	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
851	#--------------------------------------------------------------------#
852	#
853	# Drop in the name of the target on a new line, and the previous target
854	# as a dependency. Also call the echo_message function.
855	CHROOT_wrt_target "${this_script}" "$PREV"
856	#
857	# If $pkg_tarball isn't empty, we've got a package...
858	#
859	if [ "$pkg_tarball" != "" ] ; then
860	if [ "${INSTALL_LOG}" = "y" ] ; then
861	CHROOT_wrt_TouchTimestamp
862	fi
863	CHROOT_Unpack "$pkg_tarball"
864	fi
865	#
866	CHROOT_wrt_RunAsRoot "${file}"
867	#
868	# Write installed files log and remove the build directory(ies)
869	# except if the package build fails.
870	if [ "$pkg_tarball" != "" ] ; then
871	CHROOT_wrt_RemoveBuildDirs "$name"
872	if [ "${INSTALL_LOG}" = "y" ] ; then
873	CHROOT_wrt_LogNewFiles "$name1"
874	fi
875	fi
876	#
877	# Include a touch of the target name so make can check if it's already been made.
878	wrt_touch
879	#
880	#--------------------------------------------------------------------#
881	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
882	#--------------------------------------------------------------------#
883	#
884	# Keep the script file name for Makefile dependencies.
885	PREV=$this_script
886
887	done # for file in network/* ...
888	}
889
890	#--------------------------------------#
891	bootable_Makefiles() { #
892	#--------------------------------------#
893
894	if [[ "${METHOD}" = "chroot" ]]; then
895	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
896	else
897	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
898	fi
899
900
901	for file in bootable/* ; do
902	# Keep the script file name
903	this_script=`basename $file`
904
905	# A little housekeeping on the scripts
906	case $this_script in
907	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
908	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
909	*kernel) # if there is no kernel config file do not build the kernel
910	[[ -z $CONFIG ]] && continue
911	# Copy the config file to /sources with a standardized name
912	cp $CONFIG $BUILDDIR/sources/kernel-config
913	;;
914	esac
915	#
916	# First append each name of the script files to a list (this will become
917	# the names of the targets in the Makefile
918	bootabletools="$bootabletools $this_script"
919	#
920	# Grab the name of the target, strip id number and misc words.
921	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
922	case $this_script in
923	kernel) name=linux
924	;;
925	esac
926
927	pkg_tarball=$(get_package_tarball_name $name)
928
929	#--------------------------------------------------------------------#
930	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
931	#--------------------------------------------------------------------#
932	#
933	# Drop in the name of the target on a new line, and the previous target
934	# as a dependency. Also call the echo_message function.
935	CHROOT_wrt_target "${this_script}" "$PREV"
936	#
937	# If $pkg_tarball isn't empty, we've got a package...
938	# Insert instructions for unpacking the package and changing directories
939	#
940	if [ "$pkg_tarball" != "" ] ; then
941	if [ "${INSTALL_LOG}" = "y" ] ; then
942	CHROOT_wrt_TouchTimestamp
943	fi
944	CHROOT_Unpack "$pkg_tarball"
945	fi
946	#
947	# Select a script execution method
948	case $this_script in
949	fstab) if [[ -n "$FSTAB" ]]; then
950	CHROOT_wrt_CopyFstab
951	else
952	CHROOT_wrt_RunAsRoot "${file}"
953	fi
954	;;
955	*) CHROOT_wrt_RunAsRoot "${file}"
956	;;
957	esac
958	#
959	# Write installed files log and remove the build directory(ies)
960	# except if the package build fails.
961	if [ "$pkg_tarball" != "" ] ; then
962	CHROOT_wrt_RemoveBuildDirs "$name"
963	if [ "${INSTALL_LOG}" = "y" ] ; then
964	CHROOT_wrt_LogNewFiles "$name"
965	fi
966	fi
967	#
968	# Include a touch of the target name so make can check if it's already been made.
969	wrt_touch
970	#
971	#--------------------------------------------------------------------#
972	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
973	#--------------------------------------------------------------------#
974	#
975	# Keep the script file name for Makefile dependencies.
976	PREV=$this_script
977
978	done
979
980	}
981
982
983	#--------------------------------------#
984	build_Makefile() { # Construct a Makefile from the book scripts
985	#--------------------------------------#
986
987	echo "...Creating Makefile... ${BOLD}START${OFF}"
988
989	cd $JHALFSDIR/${PROGNAME}-commands
990	# Start with clean files
991	>$MKFILE
992	>$MKFILE.tmp
993
994	method_cmds=${METHOD}_Makefiles
995
996	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
997	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
998	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
999	temptools_Makefiles # mk_TEMP (LUSER) $temptools
1000	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1001	if [[ ! $TEST = "0" ]]; then
1002	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
1003	fi
1004	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
1005	# Add the iterations targets, if needed
1006	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
1007	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1008	if [ -d network ]; then
1009	network_Makefiles # If present, process network setup.
1010	fi
1011	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
1012
1013	# Add the CUSTOM_TOOLS targets, if needed
1014	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
1015
1016	# Add a header, some variables and include the function file
1017	# to the top of the real Makefile.
1018	wrt_Makefile_header
1019
1020	# Add chroot commands
1021	if [ "$METHOD" = "chroot" ] ; then
1022	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
1023	chroot=`cat chroot/???-chroot \| \
1024	sed -e "s@chroot@$CHROOT_LOC@" \
1025	-e '/#!\/bin\/bash/d' \
1026	-e '/^export/d' \
1027	-e '/^logout/d' \
1028	-e 's@ \\\@ @g' \| \
1029	tr -d '\n' \| \
1030	sed -e 's/ */ /g' \
1031	-e 's\|\\$\|&&\|g' \
1032	-e 's\|exit\|\|g' \
1033	-e 's\|$\| -c\|' \
1034	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
1035	-e 's\|set -e\|\|' \
1036	-e 's\|set +h\|\|'`
1037	echo -e "CHROOT1= $chroot\n" >> $MKFILE
1038	fi
1039
1040	################## CHROOT ####################
1041
1042	if [[ "${METHOD}" = "chroot" ]]; then
1043	(
1044	cat << EOF
1045
1046	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
1047	@sudo make do-housekeeping
1048	@echo "$VERSION - jhalfs build" > clfs-release && \\
1049	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
1050	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
1051	@\$(call echo_finished,$VERSION)
1052
1053	ck_UID:
1054	@if [ \`id -u\` = "0" ]; then \\
1055	echo "+--------------------------------------------------+"; \\
1056	echo "\|You cannot run this makefile from the root account\|"; \\
1057	echo "+--------------------------------------------------+"; \\
1058	exit 1; \\
1059	fi
1060
1061	#---------------AS ROOT
1062	mk_SETUP:
1063	@\$(call echo_SU_request)
1064	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1065	@touch \$@
1066
1067	#---------------AS LUSER
1068	mk_F_PREPS: mk_SETUP
1069	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
1070	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1071	@sudo make restore-luser-env
1072	@touch \$@
1073
1074	mk_SUDO: mk_F_PREPS
1075	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1076	@touch \$@
1077
1078	#---------------CHROOT JAIL
1079	mk_SYSTOOLS: mk_SUDO
1080	@\$(call echo_CHROOT_request)
1081	@\$(call echo_PHASE, CHROOT JAIL )
1082	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
1083	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
1084	@touch \$@
1085
1086	mk_BLFS_TOOL: create-sbu_du-report
1087	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1088	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1089	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
1090	fi;
1091	@touch \$@
1092
1093	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1094	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1095	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1096	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
1097	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
1098	fi;
1099	@touch \$@
1100
1101	SETUP: $host_prep
1102	AS_LUSER: $final_preps $cross_tools $temptools
1103	SUDO: $orphan_scripts
1104	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
1105	PREP_CHROOT_JAIL: ${chroottools}
1106	CHROOT_JAIL: SHELL=/tools/bin/bash
1107	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
1108	CUSTOM_TOOLS: $custom_list
1109
1110
1111	create-sbu_du-report: mk_SYSTOOLS
1112	@\$(call echo_message, Building)
1113	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
1114	./create-sbu_du-report.sh logs $VERSION; \\
1115	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1116	fi;
1117	@touch \$@
1118
1119	do-housekeeping:
1120	@-umount \$(MOUNT_PT)/dev/pts
1121	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
1122	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
1123	umount \$(MOUNT_PT)/\$\$link; \\
1124	unset link; \\
1125	else \\
1126	umount \$(MOUNT_PT)/dev/shm; \\
1127	fi
1128	@-umount \$(MOUNT_PT)/dev
1129	@-umount \$(MOUNT_PT)/sys
1130	@-umount \$(MOUNT_PT)/proc
1131	@-rm /tools /cross-tools
1132	@-if [ ! -f luser-exist ]; then \\
1133	userdel \$(LUSER); \\
1134	rm -rf \$(LUSER_HOME); \\
1135	fi;
1136
1137	EOF
1138	) >> $MKFILE
1139
1140	fi
1141
1142	################### BOOT #####################
1143
1144	if [[ "${METHOD}" = "boot" ]]; then
1145	(
1146	cat << EOF
1147
1148	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
1149	@sudo make restore-luser-env
1150	@sudo make do-housekeeping
1151	@\$(call echo_boot_finished,$VERSION)
1152
1153	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
1154	@echo "$VERSION - jhalfs build" > /etc/clfs-release
1155	@\$(call echo_finished,$VERSION)
1156
1157
1158	ck_UID:
1159	@if [ \`id -u\` = "0" ]; then \\
1160	echo "+--------------------------------------------------+"; \\
1161	echo "\|You cannot run this makefile from the root account\|"; \\
1162	echo "\|However, if this is the boot environment \|"; \\
1163	echo "\| the command you are looking for is \|"; \\
1164	echo "\| make makesys \|"; \\
1165	echo "\| to complete the build \|"; \\
1166	echo "+--------------------------------------------------+"; \\
1167	exit 1; \\
1168	fi
1169
1170	#---------------AS ROOT
1171
1172	mk_SETUP:
1173	@\$(call echo_SU_request)
1174	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1175	@touch \$@
1176
1177	#---------------AS LUSER
1178
1179	mk_F_PREPS: mk_SETUP
1180	@\$(call echo_PHASE,Final Preparations and Cross Tools)
1181	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1182	@touch \$@
1183
1184	mk_SUDO: mk_F_PREPS
1185	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1186	@touch \$@
1187
1188	#---------------AS ROOT
1189
1190	mk_FINAL:
1191	@\$(call echo_PHASE,Final System)
1192	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
1193	@touch \$@
1194
1195	mk_BLFS_TOOL: mk_FINAL
1196	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1197	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1198	( make -C $BLFS_ROOT/work ); \\
1199	fi;
1200	@touch \$@
1201
1202	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1203	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1204	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1205	mkdir -p ${TRACKING_DIR}; \\
1206	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
1207	fi;
1208	@touch \$@
1209
1210	SETUP: $host_prep
1211	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
1212	SUDO: $orphan_scripts
1213	AS_ROOT: SHELL=/tools/bin/bash
1214	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1215	CUSTOM_TOOLS: $custom_list
1216
1217	do-housekeeping:
1218	@-rm /tools /cross-tools
1219	@-if [ ! -f luser-exist ]; then \\
1220	userdel \$(LUSER); \\
1221	rm -rf \$(LUSER_HOME); \\
1222	fi;
1223
1224	EOF
1225	) >> $MKFILE
1226	fi
1227
1228	(
1229	cat << EOF
1230
1231	restore-luser-env:
1232	@\$(call echo_message, Building)
1233	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
1234	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
1235	fi;
1236	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
1237	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
1238	fi;
1239	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
1240	touch \$@ && \\
1241	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1242	echo --------------------------------------------------------------------------------\$(WHITE)
1243
1244	########################################################
1245
1246
1247	EOF
1248	) >> $MKFILE
1249
1250	# Bring over the items from the Makefile.tmp
1251	cat $MKFILE.tmp >> $MKFILE
1252	rm $MKFILE.tmp
1253
1254	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1255	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: