Context Navigation

source: CLFS/master.sh@ 4fef116

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 4fef116 was 81f7dc1, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Make SHELL=/bin/bash a Makefile variable instead using it inside the sub-make invocations to avoid be propagated to make processes started by the actual build scripts.
Property mode set to `100644`
File size: 34.3 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@mkdir \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools / && \\
24	touch \$@ && \\
25	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
26	echo --------------------------------------------------------------------------------\$(WHITE)
27
28	024-creatingcrossdir: 023-creatingtoolsdir
29	@\$(call echo_message, Building)
30	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
31	rm -f /cross-tools && \\
32	ln -s \$(MOUNT_PT)/cross-tools / && \\
33	touch \$@ && \\
34	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
35	echo --------------------------------------------------------------------------------\$(WHITE)
36
37	025-addinguser: 024-creatingcrossdir
38	@\$(call echo_message, Building)
39	@if [ ! -d /home/\$(LUSER) ]; then \\
40	groupadd \$(LGROUP); \\
41	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
42	else \\
43	touch luser-exist; \\
44	fi;
45	@chown \$(LUSER) \$(MOUNT_PT)/tools && \\
46	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
47	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
48	chmod a+wt \$(SRCSDIR) && \\
49	touch \$@ && \\
50	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
51	echo --------------------------------------------------------------------------------\$(WHITE)
52
53	026-settingenvironment: 025-addinguser
54	@\$(call echo_message, Building)
55	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
56	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
57	fi;
58	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
59	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
60	fi;
61	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
62	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
63	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
64	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
65	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
66	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
67	echo "" >> /home/\$(LUSER)/.bashrc && \\
68	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
69	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
70	echo "" >> /home/\$(LUSER)/.bashrc && \\
71	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
72	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
73	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
74	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
75	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
76	touch envars && \\
77	chmod -R a+wt \$(MOUNT_PT) && \\
78	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
79	touch \$@ && \\
80	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
81	echo --------------------------------------------------------------------------------\$(WHITE)
82	EOF
83	) >> $MKFILE.tmp
84	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
85
86	}
87
88	#--------------------------------------#
89	cross_tools_Makefiles() { #
90	#--------------------------------------#
91	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
92
93	for file in cross-tools/* ; do
94	# Keep the script file name
95	this_script=`basename $file`
96	#
97	# Skip this script...
98	case $this_script in
99	cflags \| variables ) # work done in host_prep_Makefiles
100	continue; ;;
101	*) ;;
102	esac
103	#
104	# Set the dependency for the first target.
105	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
106
107	# First append each name of the script files to a list (this will become
108	# the names of the targets in the Makefile
109	cross_tools="$cross_tools $this_script"
110
111	# Grab the name of the target (minus the -headers or -cross in the case of gcc
112	# and binutils in chapter 5)
113	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
114	-e 's@-static@@' \
115	-e 's@-final@@' \
116	-e 's@-64@@' \
117	-e 's@-n32@@'`
118	pkg_tarball=$(get_package_tarball_name $name)
119
120	#--------------------------------------------------------------------#
121	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
122	#--------------------------------------------------------------------#
123	#
124	# Drop in the name of the target on a new line, and the previous target
125	# as a dependency. Also call the echo_message function.
126	LUSER_wrt_target "${this_script}" "$PREV"
127	#
128	# If $pkg_tarball isn't empty, we've got a package...
129	#
130	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
131	#
132	LUSER_wrt_RunAsUser "${file}"
133	#
134	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
135	#
136	# Include a touch of the target name so make can check if it's already been made.
137	wrt_touch
138	#
139	#--------------------------------------------------------------------#
140	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
141	#--------------------------------------------------------------------#
142	#
143	# Keep the script file name for Makefile dependencies.
144	PREV=$this_script
145
146	done # for file in ....
147	}
148
149	#--------------------------------------#
150	temptools_Makefiles() { #
151	#--------------------------------------#
152	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
153
154	for file in temp-system/* ; do
155	# Keep the script file name
156	this_script=`basename $file`
157	#
158	# Deal with any odd scripts..
159	case $this_script in
160	*choose) # The choose script will fail if you cannot enter the new environment
161	# If the 'boot' build method was chosen don't run the script
162	[[ $METHOD = "boot" ]] && continue; ;;
163	*) ;;
164	esac
165
166	#
167	# First append each name of the script files to a list (this will become
168	# the names of the targets in the Makefile
169	temptools="$temptools $this_script"
170
171	#
172	# Grab the name of the target, strip id number, XXX-script
173	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
174	#
175	pkg_tarball=$(get_package_tarball_name $name)
176
177	#--------------------------------------------------------------------#
178	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
179	#--------------------------------------------------------------------#
180	#
181	# Drop in the name of the target on a new line, and the previous target
182	# as a dependency. Also call the echo_message function.
183	LUSER_wrt_target "${this_script}" "$PREV"
184	#
185	# If $pkg_tarball isn't empty, we've got a package...
186	# Insert instructions for unpacking the package and to set the PKGDIR variable.
187	#
188	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
189	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
190	#
191	LUSER_wrt_RunAsUser "${file}"
192	#
193	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
194	#
195	# Include a touch of the target name so make can check if it's already been made.
196	wrt_touch
197	#
198	#--------------------------------------------------------------------#
199	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
200	#--------------------------------------------------------------------#
201	#
202	# Keep the script file name for Makefile dependencies.
203	PREV=$this_script
204	done # for file in ....
205	}
206
207
208	#--------------------------------------#
209	chroot_Makefiles() { #
210	#--------------------------------------#
211	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
212
213	for file in chroot/* ; do
214	# Keep the script file name
215	this_script=`basename $file`
216	#
217	# Skipping scripts is done now and not included in the build tree.
218	case $this_script in
219	chroot) continue ;;
220	esac
221
222	#
223	# First append each name of the script files to a list (this will become
224	# the names of the targets in the Makefile
225	case "${this_script}" in
226	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
227	*) chroottools="$chroottools $this_script" ;;
228	esac
229
230	# Grab the name of the target, strip id number, XXX-script
231	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
232
233	pkg_tarball=$(get_package_tarball_name $name)
234
235	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
236	# .. Customized makefile entry
237	case "${this_script}" in
238	*util-linux)
239	LUSER_wrt_target "${this_script}" "$PREV"
240	LUSER_wrt_unpack "$pkg_tarball"
241	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
242	LUSER_wrt_RunAsUser "${file}"
243	LUSER_RemoveBuildDirs "${name}"
244	wrt_touch
245	temptools="$temptools $this_script"
246	continue ;;
247	esac
248
249
250	#--------------------------------------------------------------------#
251	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
252	#--------------------------------------------------------------------#
253	#
254	# Drop in the name of the target on a new line, and the previous target
255	# as a dependency. Also call the echo_message function.
256	CHROOT_wrt_target "${this_script}" "$PREV"
257	#
258	# If $pkg_tarball isn't empty, we've got a package...
259	# Insert instructions for unpacking the package and changing directories
260	#
261	if [ "$pkg_tarball" != "" ] ; then
262	CHROOT_Unpack "$pkg_tarball"
263	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
264	fi
265	#
266	# Select a script execution method
267	case $this_script in
268	*kernfs) wrt_RunAsRoot "${file}" ;;
269	*) CHROOT_wrt_RunAsRoot "${file}" ;;
270	esac
271	#
272	# Housekeeping...remove the build directory(ies), except if the package build fails.
273	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
274	#
275	# Include a touch of the target name so make can check if it's already been made.
276	wrt_touch
277	#
278	#--------------------------------------------------------------------#
279	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
280	#--------------------------------------------------------------------#
281	#
282	# Keep the script file name for Makefile dependencies.
283	PREV=$this_script
284
285	done # for file in...
286	}
287
288
289	#--------------------------------------#
290	boot_Makefiles() { #
291	#--------------------------------------#
292
293	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
294	#
295	# Create a target bootable partition containing a compile environment. Later
296	# on we boot into this environment and contine the build.
297	#
298	for file in boot/* ; do
299	# Keep the script file name
300	this_script=`basename $file`
301
302	# A little housekeeping on the scripts
303	case $this_script in
304	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
305	whatnext) continue ;;
306	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
307	*kernel) # if there is no kernel config file do not build the kernel
308	[[ -z $CONFIG ]] && continue
309	# Copy the config file to /sources with a standardized name
310	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
311	;;
312	esac
313	#
314	# First append each name of the script files to a list (this will become
315	# the names of the targets in the Makefile
316	case "${this_script}" in
317	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
318	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
319	*) boottools="$boottools $this_script" ;;
320	esac
321	#
322	# Grab the name of the target, strip id number and misc words.
323	case $this_script in
324	*kernel) name=linux ;;
325	*bootscripts) name="bootscripts-cross-lfs" ;;
326	*udev-rules) name="udev-cross-lfs" ;;
327	*grub-build) name=grub ;;
328	*-aboot-build) name=aboot ;;
329	*yaboot-build) name=yaboot ;;
330	*colo-build) name=colo ;;
331	*silo-build) name=silo ;;
332	*arcload-build) name=arcload ;;
333	*lilo-build) name=lilo ;;
334	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
335	esac
336	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
337	pkg_tarball=$(get_package_tarball_name $name)
338
339	#--------------------------------------------------------------------#
340	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
341	#--------------------------------------------------------------------#
342	#
343	# Drop in the name of the target on a new line, and the previous target
344	# as a dependency. Also call the echo_message function.
345	LUSER_wrt_target "${this_script}" "$PREV"
346	#
347	# If $pkg_tarball isn't empty, we've got a package...
348	# Insert instructions for unpacking the package and changing directories
349	#
350	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
351	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
352	#
353	# Select a script execution method
354	case $this_script in
355	# The following 2 scripts are defined in the /boot directory but need
356	# to be run as a root user. Set them up here but run them in another phase
357	changingowner) wrt_RunAsRoot "${file}" ;;
358	devices) wrt_RunAsRoot "${file}" ;;
359	fstab) if [[ -n "$FSTAB" ]]; then
360	LUSER_wrt_CopyFstab
361	else
362	LUSER_wrt_RunAsUser "${file}"
363	fi
364	;;
365	*) LUSER_wrt_RunAsUser "${file}" ;;
366	esac
367	#
368	# Housekeeping...remove any build directory(ies) except if the package build fails.
369	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
370	#
371	# Include a touch of the target name so make can check if it's already been made.
372	wrt_touch
373	#
374	#--------------------------------------------------------------------#
375	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
376	#--------------------------------------------------------------------#
377	#
378	# Keep the script file name for Makefile dependencies.
379	PREV=$this_script
380
381	done
382	}
383
384
385	#--------------------------------------#
386	testsuite_tools_Makefiles() { #
387	#--------------------------------------#
388
389	if [[ "${METHOD}" = "chroot" ]]; then
390	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
391	else
392	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
393	PREV=""
394	fi
395
396	for file in testsuite-tools/* ; do
397	# Keep the script file name
398	this_script=`basename $file`
399
400	# First append each name of the script files to a list (this will become
401	# the names of the targets in the Makefile
402	testsuitetools="$testsuitetools $this_script"
403
404	# Grab the name of the target, strip id number, XXX-script
405	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
406	-e 's@-64bit@@' \
407	-e 's@-64@@' \
408	-e 's@64@@' \
409	-e 's@n32@@'`
410
411	pkg_tarball=$(get_package_tarball_name $name)
412
413	#--------------------------------------------------------------------#
414	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
415	#--------------------------------------------------------------------#
416	#
417	# Drop in the name of the target on a new line, and the previous target
418	# as a dependency. Also call the echo_message function.
419	CHROOT_wrt_target "${this_script}" "$PREV"
420	#
421	CHROOT_Unpack "$pkg_tarball"
422	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
423	#
424	CHROOT_wrt_RunAsRoot "${file}"
425	#
426	CHROOT_wrt_RemoveBuildDirs "${name}"
427	#
428	# Include a touch of the target name so make can check if it's already been made.
429	wrt_touch
430	#
431	#--------------------------------------------------------------------#
432	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
433	#--------------------------------------------------------------------#
434	#
435	# Keep the script file name for Makefile dependencies.
436	PREV=$this_script
437
438	done
439	}
440
441
442	#--------------------------------------#
443	final_system_Makefiles() { #
444	#--------------------------------------#
445	# Set envars and scripts for iteration targets
446	if [[ -z "$1" ]] ; then
447	local N=""
448	# In boot method the makesys phase was initiated in testsuite_tools_makefile
449	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
450	else
451	local N=-build_$1
452	local basicsystem=""
453	mkdir final-system$N
454	cp final-system/* final-system$N
455	for script in final-system$N/* ; do
456	# Overwrite existing symlinks, files, and dirs
457	sed -e 's/ln -sv/&f/g' \
458	-e 's/mv -v/&f/g' \
459	-e 's/mkdir -v/&p/g' -i ${script}
460	# Rename the scripts
461	mv ${script} ${script}$N
462	done
463	# Remove Bzip2 binaries before make install
464	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
465	# Delete *old Readline libraries just after make install
466	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
467	fi
468
469	if [[ "${METHOD}" = "chroot" ]]; then
470	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
471	else
472	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
473	fi
474
475	for file in final-system$N/* ; do
476	# Keep the script file name
477	this_script=`basename $file`
478
479	# Test if the stripping phase must be skipped.
480	# Skip alsp temp-perl for iterative runs
481	case $this_script in
482	stripping) [[ "$STRIP" = "n" ]] && continue ;;
483	temp-perl) [[ -n "$N" ]] && continue ;;
484	esac
485
486	# Grab the name of the target, strip id number, XXX-script
487	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
488	-e 's@temp-@@' \
489	-e 's@-64bit@@' \
490	-e 's@-64@@' \
491	-e 's@64@@' \
492	-e 's@n32@@' \
493	-e 's,'$N',,'`
494
495	# Find the version of the command files, if it corresponds with the building of
496	# a specific package. We need this here to can skip scripts not needed for
497	# iterations rebuilds
498	pkg_tarball=$(get_package_tarball_name $name)
499
500	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
501	case "${this_script}" in
502	stripping) ;;
503	*) continue ;;
504	esac
505	fi
506
507	# Append each name of the script files to a list (this will become
508	# the names of the targets in the Makefile
509	basicsystem="$basicsystem ${this_script}"
510
511	#--------------------------------------------------------------------#
512	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
513	#--------------------------------------------------------------------#
514	#
515	# Drop in the name of the target on a new line, and the previous target
516	# as a dependency. Also call the echo_message function.
517	CHROOT_wrt_target "${this_script}" "$PREV"
518
519	# If $pkg_tarball isn't empty, we've got a package...
520	if [ "$pkg_tarball" != "" ] ; then
521	CHROOT_Unpack "$pkg_tarball"
522	# If the testsuites must be run, initialize the log file
523	case $name in
524	binutils \| gcc \| glibc )
525	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
526	;;
527	* )
528	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
529	;;
530	esac
531	# If using optimizations, write the instructions
532	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
533	fi
534	#
535	CHROOT_wrt_RunAsRoot "${file}"
536	#
537	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
538	#
539	# Include a touch of the target name so make can check if it's already been made.
540	wrt_touch
541	#
542	#--------------------------------------------------------------------#
543	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
544	#--------------------------------------------------------------------#
545	#
546	# Keep the script file name for Makefile dependencies.
547	PREV=${this_script}
548	# Set system_build envar for iteration targets
549	system_build=$basicsystem
550	done # for file in final-system/* ...
551	}
552
553	#--------------------------------------#
554	bootscripts_Makefiles() { #
555	#--------------------------------------#
556
557	if [[ "${METHOD}" = "chroot" ]]; then
558	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
559	else
560	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
561	fi
562
563	for file in bootscripts/* ; do
564	# Keep the script file name
565	this_script=`basename $file`
566
567	case $this_script in
568	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
569	console) continue ;; # Use the files that came with the bootscripts
570	*) ;;
571	esac
572
573	# First append each name of the script files to a list (this will become
574	# the names of the targets in the Makefile
575	bootscripttools="$bootscripttools $this_script"
576
577	# Grab the name of the target, strip id number, XXX-script
578	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
579	-e 's@-64bit@@' \
580	-e 's@-64@@' \
581	-e 's@64@@' \
582	-e 's@n32@@'`
583	case $name in
584	bootscripts) name=bootscripts-cross-lfs ;;
585	*udev-rules) name=udev-cross-lfs ;;
586	esac
587
588	pkg_tarball=$(get_package_tarball_name $name)
589
590	#--------------------------------------------------------------------#
591	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
592	#--------------------------------------------------------------------#
593	#
594	# Drop in the name of the target on a new line, and the previous target
595	# as a dependency. Also call the echo_message function.
596	CHROOT_wrt_target "${this_script}" "$PREV"
597	#
598	# If $pkg_tarball isn't empty, we've got a package...
599	#
600	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
601	#
602	CHROOT_wrt_RunAsRoot "${file}"
603	#
604	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
605	#
606	# Include a touch of the target name so make can check if it's already been made.
607	wrt_touch
608	#
609	#--------------------------------------------------------------------#
610	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
611	#--------------------------------------------------------------------#
612	#
613	# Keep the script file name for Makefile dependencies.
614	PREV=$this_script
615
616	done # for file in bootscripts/* ...
617	}
618
619	#--------------------------------------#
620	bootable_Makefiles() { #
621	#--------------------------------------#
622
623	if [[ "${METHOD}" = "chroot" ]]; then
624	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
625	else
626	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
627	fi
628
629
630	for file in bootable/* ; do
631	# Keep the script file name
632	this_script=`basename $file`
633
634	# A little housekeeping on the scripts
635	case $this_script in
636	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
637	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
638	*kernel) # if there is no kernel config file do not build the kernel
639	[[ -z $CONFIG ]] && continue
640	# Copy the config file to /sources with a standardized name
641	cp $CONFIG $BUILDDIR/sources/kernel-config
642	;;
643	esac
644	#
645	# First append each name of the script files to a list (this will become
646	# the names of the targets in the Makefile
647	bootabletools="$bootabletools $this_script"
648	#
649	# Grab the name of the target, strip id number and misc words.
650	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
651	case $this_script in
652	kernel) name=linux
653	;;
654	esac
655
656	pkg_tarball=$(get_package_tarball_name $name)
657
658	#--------------------------------------------------------------------#
659	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
660	#--------------------------------------------------------------------#
661	#
662	# Drop in the name of the target on a new line, and the previous target
663	# as a dependency. Also call the echo_message function.
664	CHROOT_wrt_target "${this_script}" "$PREV"
665	#
666	# If $pkg_tarball isn't empty, we've got a package...
667	# Insert instructions for unpacking the package and changing directories
668	#
669	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
670	#
671	# Select a script execution method
672	case $this_script in
673	fstab) if [[ -n "$FSTAB" ]]; then
674	CHROOT_wrt_CopyFstab
675	else
676	CHROOT_wrt_RunAsRoot "${file}"
677	fi
678	;;
679	*) CHROOT_wrt_RunAsRoot "${file}"
680	;;
681	esac
682	#
683	# Housekeeping...remove any build directory(ies) except if the package build fails.
684	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
685	#
686	# Include a touch of the target name so make can check if it's already been made.
687	wrt_touch
688	#
689	#--------------------------------------------------------------------#
690	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
691	#--------------------------------------------------------------------#
692	#
693	# Keep the script file name for Makefile dependencies.
694	PREV=$this_script
695
696	done
697
698	}
699
700
701	#--------------------------------------#
702	build_Makefile() { # Construct a Makefile from the book scripts
703	#--------------------------------------#
704	#
705	# Script crashes if error trapping is on
706	#
707	set +e
708	declare -f method_cmds
709	set -e
710
711	echo "...Creating Makefile... ${BOLD}START${OFF}"
712
713	cd $JHALFSDIR/${PROGNAME}-commands
714	# Start with a clean files
715	>$MKFILE
716	>$MKFILE.tmp
717
718	method_cmds=${METHOD}_Makefiles
719
720	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
721	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
722	temptools_Makefiles # mk_TEMP (LUSER) $temptools
723	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
724	if [[ ! $TEST = "0" ]]; then
725	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
726	fi
727	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
728	# Add the iterations targets, if needed
729	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
730	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
731	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
732
733	# Add the CUSTOM_TOOLS targets, if needed
734	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
735	# Add the BLFS_TOOL targets, if needed
736	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
737
738	# Add a header, some variables and include the function file
739	# to the top of the real Makefile.
740	wrt_Makefile_header
741
742	# Add chroot commands
743	if [ "$METHOD" = "chroot" ] ; then
744	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
745	chroot=`cat chroot/chroot \| \
746	sed -e "s@chroot@$CHROOT_LOC@" \
747	-e '/#!\/bin\/bash/d' \
748	-e '/^export/d' \
749	-e '/^logout/d' \
750	-e 's@ \\\@ @g' \| \
751	tr -d '\n' \| \
752	sed -e 's/ */ /g' \
753	-e 's\|\\$\|&&\|g' \
754	-e 's\|exit\|\|g' \
755	-e 's\|$\| -c\|' \
756	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
757	-e 's\|set -e\|\|' \
758	-e 's\|set +h\|\|'`
759	echo -e "CHROOT1= $chroot\n" >> $MKFILE
760	fi
761
762	################## CHROOT ####################
763
764	if [[ "${METHOD}" = "chroot" ]]; then
765	(
766	cat << EOF
767
768	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
769	@sudo make do-housekeeping
770	@echo "$VERSION - jhalfs build" > clfs-release && \\
771	sudo mv clfs-release \$(MOUNT_PT)/etc
772	@\$(call echo_finished,$VERSION)
773
774	ck_UID:
775	@if [ \`id -u\` = "0" ]; then \\
776	echo "+--------------------------------------------------+"; \\
777	echo "\|You cannot run this makefile from the root account\|"; \\
778	echo "+--------------------------------------------------+"; \\
779	exit 1; \\
780	fi
781
782	#---------------AS ROOT
783	mk_SETUP:
784	@\$(call echo_SU_request)
785	@sudo make SETUP
786	@touch \$@
787
788	#---------------AS LUSER
789	mk_CROSS: mk_SETUP
790	@\$(call echo_PHASE,Cross and Temporary Tools)
791	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make AS_LUSER" )
792	@sudo make restore-luser-env
793	@touch \$@
794
795	mk_SUDO: mk_CROSS
796	@sudo make SUDO
797	@touch \$@
798	#
799	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
800	# chroot environment. (Unless someone knows a different way)
801	# Manually create the /bin directory and provide link to the /tools dir.
802	# Also change the original symlink creation to include (f)orce to prevent failure due to
803	# pre-existing links.
804
805	#---------------CHROOT JAIL
806	mk_SYSTOOLS: mk_SUDO
807	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
808	mkdir \$(MOUNT_PT)/bin; \\
809	cd \$(MOUNT_PT)/bin && \\
810	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
811	sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
812	fi;
813	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/*-createfiles
814	@\$(call echo_CHROOT_request)
815	@\$(call echo_PHASE, CHROOT JAIL )
816	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
817	@touch \$@
818
819	mk_CUSTOM_TOOLS: create-sbu_du-report
820	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
821	\$(call echo_PHASE,Building CUSTOM_TOOLS); \\
822	\$(call echo_CHROOT_request); \\
823	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
824	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CUSTOM_TOOLS"); \\
825	fi;
826	@touch \$@
827
828	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
829	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
830	\$(call echo_PHASE,Building BLFS_TOOL); \\
831	\$(call echo_CHROOT_request); \\
832	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
833	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
834	fi;
835	@touch \$@
836
837	SETUP: $host_prep
838	AS_LUSER: $cross_tools $temptools
839	SUDO: $orphan_scripts
840	CHROOT_JAIL: ${chroottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
841	CUSTOM_TOOLS: $custom_list
842	BLFS_TOOL: $blfs_tool
843
844
845	create-sbu_du-report: mk_SYSTOOLS
846	@\$(call echo_message, Building)
847	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
848	./create-sbu_du-report.sh logs $VERSION; \\
849	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
850	fi;
851	@touch \$@
852
853	do-housekeeping:
854	@-umount \$(MOUNT_PT)/dev/pts
855	@-umount \$(MOUNT_PT)/dev/shm
856	@-umount \$(MOUNT_PT)/dev
857	@-umount \$(MOUNT_PT)/sys
858	@-umount \$(MOUNT_PT)/proc
859	@-rm /tools /cross-tools
860	@-if [ ! -f luser-exist ]; then \\
861	userdel \$(LUSER); \\
862	rm -rf /home/\$(LUSER); \\
863	fi;
864
865	EOF
866	) >> $MKFILE
867
868	fi
869
870	################### BOOT #####################
871
872	if [[ "${METHOD}" = "boot" ]]; then
873	(
874	cat << EOF
875
876	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
877	@sudo make restore-luser-env
878	@sudo make do-housekeeping
879	@\$(call echo_boot_finished,$VERSION)
880
881	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
882	@echo "$VERSION - jhalfs build" > /etc/clfs-release
883	@\$(call echo_finished,$VERSION)
884
885
886	ck_UID:
887	@if [ \`id -u\` = "0" ]; then \\
888	echo "+--------------------------------------------------+"; \\
889	echo "\|You cannot run this makefile from the root account\|"; \\
890	echo "\|However, if this is the boot environment \|"; \\
891	echo "\| the command you are looking for is \|"; \\
892	echo "\| make makesys \|"; \\
893	echo "\| to finish off the build \|"; \\
894	echo "+--------------------------------------------------+"; \\
895	exit 1; \\
896	fi
897
898	#---------------AS ROOT
899
900	mk_SETUP:
901	@\$(call echo_SU_request)
902	@sudo make SETUP
903	@touch \$@
904
905	#---------------AS LUSER
906
907	mk_CROSS: mk_SETUP
908	@\$(call echo_PHASE,Cross Tool)
909	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make AS_LUSER" )
910	@touch \$@
911
912	mk_SUDO: mk_CROSS
913	@sudo make SUDO
914	@touch \$@
915
916	#---------------AS ROOT
917
918	mk_FINAL:
919	@\$(call echo_PHASE,Final System)
920	@( source /root/.bash_profile && make AS_ROOT )
921	@touch \$@
922
923	mk_CUSTOM_TOOLS: mk_FINAL
924	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
925	mkdir -p ${TRACKING_DIR}; \\
926	\$(call echo_PHASE,Building CUSTOM_TOOLS); \\
927	( source /root/.bash_profile && make CUSTOM_TOOLS ); \\
928	fi;
929	@touch \$@
930
931	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
932	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
933	mkdir -p $TRACKING_DIR; \\
934	\$(call echo_PHASE,Building BLFS_TOOL); \\
935	( source /root/.bash_profile && make BLFS_TOOL ); \\
936	fi
937	@touch \$@
938
939	SETUP: $host_prep
940	AS_LUSER: $cross_tools $temptools ${boottools}
941	SUDO: $orphan_scripts
942	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
943	CUSTOM_TOOLS: $custom_list
944	BLFS_TOOL: $blfs_tool
945
946	do-housekeeping:
947	@-rm /tools /cross-tools
948	@-if [ ! -f luser-exist ]; then \\
949	userdel \$(LUSER); \\
950	rm -rf /home/\$(LUSER); \\
951	fi;
952
953	EOF
954	) >> $MKFILE
955	fi
956
957	(
958	cat << EOF
959
960	restore-luser-env:
961	@\$(call echo_message, Building)
962	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
963	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
964	fi;
965	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
966	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
967	fi;
968	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
969	touch \$@ && \\
970	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
971	echo --------------------------------------------------------------------------------\$(WHITE)
972
973	########################################################
974
975
976	EOF
977	) >> $MKFILE
978
979	# Bring over the items from the Makefile.tmp
980	cat $MKFILE.tmp >> $MKFILE
981	rm $MKFILE.tmp
982
983	echo "Creating Makefile... ${BOLD}DONE${OFF}"
984	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: