Context Navigation

source: CLFS/master.sh@ 9575278

2.4 ablfs-more legacy trunk

Last change on this file since 9575278 was 5f154f1, checked in by Pierre Labastie <pierre@…>, 9 years ago
Add instructions to unset PKG_CONFIG_PATH in CLFS? masters, because some distros set this variable and it causes some trouble. Thanks to W. Harrington for the patch.
Property mode set to `100644`
File size: 43.2 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@install -dv \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@install -dv \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
38	mkdir -pv \$(LUSER_HOME); \\
39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
40	else \\
41	touch luser-exist; \\
42	fi
43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
46	chmod a+wt \$(SRCSDIR)
47	@\$(call housekeeping)
48
49	026-settingenvironment: 025-addinguser
50	@\$(call echo_message, Building)
51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
53	fi
54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
56	fi;
57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
67	echo "" >> \$(LUSER_HOME)/.bashrc && \\
68	EOF
69	) >> $MKFILE.tmp
70	if ! [ -e final-preps/*variables ]; then
71	(
72	cat << EOF
73	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
74	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
75	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
76	EOF
77	) >> $MKFILE.tmp
78	fi
79	(
80	cat << EOF
81	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
82	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
83	chmod a+wt \$(MOUNT_PT) && \\
84	if [ -d \$(MOUNT_PT)/var ]; then \\
85	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
86	fi && \\
87	touch envars && \\
88	chown \$(LUSER):\$(LGROUP) envars
89	@\$(call housekeeping)
90	EOF
91	) >> $MKFILE.tmp
92	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
93
94	}
95
96	#--------------------------------------#
97	final_preps_Makefiles() {
98	#--------------------------------------#
99	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
100	for file in final-preps/* ; do
101	this_script=`basename $file`
102	case $this_script in
103	*variables )
104	;;
105	*) continue; ;;
106	esac
107	# Set the dependency for the first target.
108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
109
110	# First append each name of the script files to a list (this will become
111	# the names of the targets in the Makefile
112	final_preps="$final_preps $this_script"
113
114	# No need to grab the package name
115
116	LUSER_wrt_target "${this_script}" "$PREV"
117	LUSER_wrt_RunAsUser "${file}"
118	wrt_touch
119	PREV=$this_script
120	done # for file in ....
121	}
122
123	#--------------------------------------#
124	cross_tools_Makefiles() { #
125	#--------------------------------------#
126	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
127
128	for file in cross-tools/* ; do
129	# Keep the script file name
130	this_script=`basename $file`
131	#
132	# Skip this script...
133	case $this_script in
134	cflags \| variables ) # work done in host_prep_Makefiles
135	continue; ;;
136	*) ;;
137	esac
138	#
139	# Set the dependency for the first target.
140	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
141
142	# First append each name of the script files to a list (this will become
143	# the names of the targets in the Makefile
144	cross_tools="$cross_tools $this_script"
145
146	# Grab the name of the target (minus the -headers or -cross in the case of gcc
147	# and binutils in chapter 5)
148	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
149	-e 's@-static@@' \
150	-e 's@-final@@' \
151	-e 's@-64@@' \
152	-e 's@-n32@@' \
153	-e 's@-pass1@@'`
154	pkg_tarball=$(get_package_tarball_name $name)
155
156	#--------------------------------------------------------------------#
157	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
158	#--------------------------------------------------------------------#
159	#
160	# Drop in the name of the target on a new line, and the previous target
161	# as a dependency. Also call the echo_message function.
162	LUSER_wrt_target "${this_script}" "$PREV"
163	#
164	# If $pkg_tarball isn't empty, we've got a package...
165	#
166	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
167	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
168	#
169	LUSER_wrt_RunAsUser "${file}"
170	#
171	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
172	#
173	# Include a touch of the target name so make can check if it's already been made.
174	wrt_touch
175	#
176	#--------------------------------------------------------------------#
177	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
178	#--------------------------------------------------------------------#
179	#
180	# Keep the script file name for Makefile dependencies.
181	PREV=$this_script
182
183	done # for file in ....
184	}
185
186	#--------------------------------------#
187	temptools_Makefiles() { #
188	#--------------------------------------#
189	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
190
191	for file in temp-system/* ; do
192	# Keep the script file name
193	this_script=`basename $file`
194	#
195	# Deal with any odd scripts..
196	case $this_script in
197	*choose) # The choose script will fail if you cannot enter the new environment
198	# If the 'boot' build method was chosen don't run the script
199	[[ $METHOD = "boot" ]] && continue; ;;
200	*) ;;
201	esac
202
203	#
204	# First append each name of the script files to a list (this will become
205	# the names of the targets in the Makefile
206	temptools="$temptools $this_script"
207
208	#
209	# Grab the name of the target, strip id number, XXX-script
210	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
211	#
212	pkg_tarball=$(get_package_tarball_name $name)
213
214	#--------------------------------------------------------------------#
215	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
216	#--------------------------------------------------------------------#
217	#
218	# Drop in the name of the target on a new line, and the previous target
219	# as a dependency. Also call the echo_message function.
220	LUSER_wrt_target "${this_script}" "$PREV"
221	#
222	# If $pkg_tarball isn't empty, we've got a package...
223	# Insert instructions for unpacking the package and to set the PKGDIR variable.
224	#
225	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
226	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
227	#
228	LUSER_wrt_RunAsUser "${file}"
229	#
230	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
231	#
232	# Include a touch of the target name so make can check if it's already been made.
233	wrt_touch
234	#
235	#--------------------------------------------------------------------#
236	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
237	#--------------------------------------------------------------------#
238	#
239	# Keep the script file name for Makefile dependencies.
240	PREV=$this_script
241	done # for file in ....
242	}
243
244
245	#--------------------------------------#
246	chroot_Makefiles() { #
247	#--------------------------------------#
248	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
249
250	for file in chroot/* ; do
251	# Keep the script file name
252	this_script=`basename $file`
253	#
254	# Skipping scripts is done now and not included in the build tree.
255	case $this_script in
256	chroot) continue ;;
257	esac
258
259	#
260	# First append each name of the script files to a list (this will become
261	# the names of the targets in the Makefile
262	case "${this_script}" in
263	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
264	*) chroottools="$chroottools $this_script" ;;
265	esac
266
267	# Grab the name of the target, strip id number, XXX-script
268	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
269
270	pkg_tarball=$(get_package_tarball_name $name)
271
272	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
273	# Same for e2fsprogs (in CLFS 1.1.0)
274	# .. Customized makefile entry
275	case "${this_script}" in
276	*util-linux)
277	LUSER_wrt_target "${this_script}" "$PREV"
278	LUSER_wrt_unpack "$pkg_tarball"
279	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
280	LUSER_wrt_RunAsUser "${file}"
281	LUSER_RemoveBuildDirs "${name}"
282	wrt_touch
283	temptools="$temptools $this_script"
284	continue ;;
285	*util-linux-ng)
286	LUSER_wrt_target "${this_script}" "$PREV"
287	LUSER_wrt_unpack "$pkg_tarball"
288	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
289	LUSER_wrt_RunAsUser "${file}"
290	LUSER_RemoveBuildDirs "${name}"
291	wrt_touch
292	temptools="$temptools $this_script"
293	continue ;;
294	*util-linux-libs)
295	LUSER_wrt_target "${this_script}" "$PREV"
296	LUSER_wrt_unpack "$pkg_tarball"
297	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
298	LUSER_wrt_RunAsUser "${file}"
299	LUSER_RemoveBuildDirs "${name}"
300	wrt_touch
301	temptools="$temptools $this_script"
302	continue ;;
303	*e2fsprogs)
304	LUSER_wrt_target "${this_script}" "$PREV"
305	LUSER_wrt_unpack "$pkg_tarball"
306	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
307	LUSER_wrt_RunAsUser "${file}"
308	LUSER_RemoveBuildDirs "${name}"
309	wrt_touch
310	temptools="$temptools $this_script"
311	continue ;;
312	*e2fsprogs-libs)
313	LUSER_wrt_target "${this_script}" "$PREV"
314	LUSER_wrt_unpack "$pkg_tarball"
315	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
316	LUSER_wrt_RunAsUser "${file}"
317	LUSER_RemoveBuildDirs "${name}"
318	wrt_touch
319	temptools="$temptools $this_script"
320	continue ;;
321	esac
322
323
324	#--------------------------------------------------------------------#
325	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
326	#--------------------------------------------------------------------#
327	#
328	# Drop in the name of the target on a new line, and the previous target
329	# as a dependency. Also call the echo_message function.
330	CHROOT_wrt_target "${this_script}" "$PREV"
331	#
332	# If $pkg_tarball isn't empty, we've got a package...
333	# Insert instructions for unpacking the package and changing directories
334	#
335	if [ "$pkg_tarball" != "" ] ; then
336	CHROOT_Unpack "$pkg_tarball"
337	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
338	fi
339	#
340	# Select a script execution method
341	case $this_script in
342	*kernfs) wrt_RunAsRoot "${file}" ;;
343	*) CHROOT_wrt_RunAsRoot "${file}" ;;
344	esac
345	#
346	# Housekeeping...remove the build directory(ies), except if the package build fails.
347	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
348	#
349	# Include a touch of the target name so make can check if it's already been made.
350	wrt_touch
351	#
352	#--------------------------------------------------------------------#
353	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
354	#--------------------------------------------------------------------#
355	#
356	# Keep the script file name for Makefile dependencies.
357	PREV=$this_script
358
359	done # for file in...
360	}
361
362
363	#--------------------------------------#
364	boot_Makefiles() { #
365	#--------------------------------------#
366
367	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
368	#
369	# Create a target bootable partition containing a compile environment. Later
370	# on we boot into this environment and contine the build.
371	#
372	for file in boot/* ; do
373	# Keep the script file name
374	this_script=`basename $file`
375
376	# A little housekeeping on the scripts
377	case $this_script in
378	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
379	how-to-view) continue ;;
380	whatnext) continue ;;
381	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
382	*kernel) # if there is no kernel config file do not build the kernel
383	[[ -z $CONFIG ]] && continue
384	# Copy the config file to /sources with a standardized name
385	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
386	;;
387	esac
388	#
389	# First append each name of the script files to a list (this will become
390	# the names of the targets in the Makefile). Those names differ depending
391	# on the version of the book. What makes the difference between those
392	# versions is the presence of "how-to-view" in the boot chapter.
393	if [ -f boot/*how-to-view ]; then
394	case "${this_script}" in
395	*changingowner)
396	orphan_scripts="${orphan_scripts} ${this_script}"
397	;;
398	*creatingdirs)
399	orphan_scripts="${orphan_scripts} ${this_script}"
400	;;
401	*createfiles)
402	orphan_scripts="${orphan_scripts} ${this_script}"
403	;;
404	*devices)
405	orphan_scripts="${orphan_scripts} ${this_script}"
406	;;
407	*flags)
408	orphan_scripts="${orphan_scripts} ${this_script}"
409	;;
410	*fstab)
411	orphan_scripts="${orphan_scripts} ${this_script}"
412	;;
413	*pwdgroup)
414	orphan_scripts="${orphan_scripts} ${this_script}"
415	;;
416	*settingenvironment)
417	orphan_scripts="${orphan_scripts} ${this_script}"
418	;;
419	*)
420	boottools="$boottools $this_script"
421	;;
422	esac
423	else
424	case "${this_script}" in
425	*changingowner)
426	orphan_scripts="${orphan_scripts} ${this_script}"
427	;;
428	*devices)
429	orphan_scripts="${orphan_scripts} ${this_script}"
430	;;
431	*)
432	boottools="$boottools $this_script"
433	;;
434	esac
435	fi
436	#
437	# Grab the name of the target, strip id number and misc words.
438	case $this_script in
439	*kernel) name=linux ;;
440	*bootscripts) name="bootscripts-cross-lfs" ;;
441	*boot-scripts) name="boot-scripts-cross-lfs" ;;
442	*udev-rules) name="udev-cross-lfs" ;;
443	*grub-build) name=grub ;;
444	*-aboot-build) name=aboot ;;
445	*yaboot-build) name=yaboot ;;
446	*colo-build) name=colo ;;
447	*silo-build) name=silo ;;
448	*arcload-build) name=arcload ;;
449	*lilo-build) name=lilo ;;
450	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
451	esac
452	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
453	pkg_tarball=$(get_package_tarball_name $name)
454
455	#--------------------------------------------------------------------#
456	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
457	#--------------------------------------------------------------------#
458	#
459	# Drop in the name of the target on a new line, and the previous target
460	# as a dependency. Also call the echo_message function.
461	LUSER_wrt_target "${this_script}" "$PREV"
462	#
463	# If $pkg_tarball isn't empty, we've got a package...
464	# Insert instructions for unpacking the package and changing directories
465	#
466	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
467	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
468	#
469	# Select a script execution method
470	if [ -f boot/*how-to-view ]; then
471	case $this_script in
472	# The following 8 scripts are defined in the /boot directory but need
473	# to be run as a root user. Set them up here but run them in another
474	# phase
475	*changingowner) wrt_RunAsRoot "${file}" ;;
476	*creatingdirs) wrt_RunAsRoot "${file}" ;;
477	*createfiles) wrt_RunAsRoot "${file}" ;;
478	*devices) wrt_RunAsRoot "${file}" ;;
479	*flags) wrt_RunAsRoot "${file}" ;;
480	*fstab)
481	if [[ -n "$FSTAB" ]]; then
482	LUSER_wrt_CopyFstab
483	else
484	wrt_RunAsRoot "${file}"
485	fi
486	;;
487	*pwdgroup) wrt_RunAsRoot "${file}" ;;
488	*settingenvironment) wrt_RunAsRoot "${file}" ;;
489	*) LUSER_wrt_RunAsUser "${file}" ;;
490	esac
491	else
492	case $this_script in
493	# The following 2 scripts are defined in the /boot directory but need
494	# to be run as a root user. Set them up here but run them in another
495	# phase
496	*changingowner) wrt_RunAsRoot "${file}" ;;
497	*devices) wrt_RunAsRoot "${file}" ;;
498	*fstab)
499	if [[ -n "$FSTAB" ]]; then
500	LUSER_wrt_CopyFstab
501	else
502	LUSER_wrt_RunAsUser "${file}"
503	fi
504	;;
505	*) LUSER_wrt_RunAsUser "${file}" ;;
506	esac
507	fi
508	#
509	# Housekeeping...remove any build directory(ies) except if the package build fails.
510	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
511	#
512	# Include a touch of the target name so make can check if it's already been made.
513	wrt_touch
514	#
515	#--------------------------------------------------------------------#
516	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
517	#--------------------------------------------------------------------#
518	#
519	# Keep the script file name for Makefile dependencies.
520	PREV=$this_script
521
522	done
523	}
524
525
526	#--------------------------------------#
527	testsuite_tools_Makefiles() { #
528	#--------------------------------------#
529
530	if [[ "${METHOD}" = "chroot" ]]; then
531	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
532	else
533	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
534	PREV=""
535	fi
536
537	for file in testsuite-tools/* ; do
538	# Keep the script file name
539	this_script=`basename $file`
540
541	# First append each name of the script files to a list (this will become
542	# the names of the targets in the Makefile
543	testsuitetools="$testsuitetools $this_script"
544
545	# Grab the name of the target, strip id number, XXX-script
546	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
547	-e 's@-64bit@@' \
548	-e 's@-64@@' \
549	-e 's@64@@' \
550	-e 's@n32@@'`
551
552	pkg_tarball=$(get_package_tarball_name $name)
553
554	#--------------------------------------------------------------------#
555	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
556	#--------------------------------------------------------------------#
557	#
558	# Drop in the name of the target on a new line, and the previous target
559	# as a dependency. Also call the echo_message function.
560	CHROOT_wrt_target "${this_script}" "$PREV"
561	#
562	CHROOT_Unpack "$pkg_tarball"
563	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
564	#
565	CHROOT_wrt_RunAsRoot "${file}"
566	#
567	CHROOT_wrt_RemoveBuildDirs "${name}"
568	#
569	# Include a touch of the target name so make can check if it's already been made.
570	wrt_touch
571	#
572	#--------------------------------------------------------------------#
573	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
574	#--------------------------------------------------------------------#
575	#
576	# Keep the script file name for Makefile dependencies.
577	PREV=$this_script
578
579	done
580	}
581
582
583	#--------------------------------------#
584	final_system_Makefiles() { #
585	#--------------------------------------#
586	# Set envars and scripts for iteration targets
587	if [[ -z "$1" ]] ; then
588	local N=""
589	# In boot method the makesys phase was initiated in testsuite_tools_makefile
590	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
591	else
592	local N=-build_$1
593	local basicsystem=""
594	mkdir final-system$N
595	cp final-system/* final-system$N
596	for script in final-system$N/* ; do
597	# Overwrite existing symlinks, files, and dirs
598	sed -e 's/ln -sv/&f/g' \
599	-e 's/mv -v/&f/g' \
600	-e 's/mkdir -v/&p/g' -i ${script}
601	# Rename the scripts
602	mv ${script} ${script}$N
603	done
604	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
605	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
606	# Delete *old Readline libraries just after make install
607	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
608	fi
609
610	if [[ "${METHOD}" = "chroot" ]]; then
611	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
612	else
613	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
614	fi
615
616	for file in final-system$N/* ; do
617	# Keep the script file name
618	this_script=`basename $file`
619
620	# Test if the stripping phase must be skipped.
621	# Skip also temp-perl for iterative runs
622	case $this_script in
623	stripping) [[ "$STRIP" = "n" ]] && continue ;;
624	temp-perl) [[ -n "$N" ]] && continue ;;
625	esac
626
627	# Grab the name of the target, strip id number, XXX-script.
628	# name1 is partially stripped and should be used for logging files.
629	# name is completely stripped and is used for grabbing
630	# the package name.
631	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
632	-e 's,'$N',,'`
633	name=`echo $name1 \| sed -e 's@temp-@@' \
634	-e 's@-64bit@@' \
635	-e 's@-64@@' \
636	-e 's@64@@' \
637	-e 's@n32@@'`
638
639	# Find the version of the command files, if it corresponds with the building of
640	# a specific package. We need this here to can skip scripts not needed for
641	# iterations rebuilds
642	pkg_tarball=$(get_package_tarball_name $name)
643
644	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
645	case "${this_script}" in
646	stripping) ;;
647	*) continue ;;
648	esac
649	fi
650
651	# Append each name of the script files to a list (this will become
652	# the names of the targets in the Makefile
653	basicsystem="$basicsystem ${this_script}"
654
655	#--------------------------------------------------------------------#
656	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
657	#--------------------------------------------------------------------#
658	#
659	# Drop in the name of the target on a new line, and the previous target
660	# as a dependency. Also call the echo_message function.
661	CHROOT_wrt_target "${this_script}" "$PREV"
662
663	# If $pkg_tarball isn't empty, we've got a package...
664	if [ "$pkg_tarball" != "" ] ; then
665	# Touch timestamp file if installed files logs will be created.
666	# But only for the firt build when running iterative builds.
667	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
668	CHROOT_wrt_TouchTimestamp
669	fi
670	CHROOT_Unpack "$pkg_tarball"
671	# If the testsuites must be run, initialize the log file
672	case $name in
673	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
674	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
675	;;
676	* )
677	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
678	;;
679	esac
680	# If using optimizations, write the instructions
681	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
682	fi
683	#
684	CHROOT_wrt_RunAsRoot "${file}"
685	#
686	# Write installed files log and remove the build directory(ies)
687	# except if the package build fails.
688	if [ "$pkg_tarball" != "" ] ; then
689	CHROOT_wrt_RemoveBuildDirs "$name"
690	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
691	CHROOT_wrt_LogNewFiles "$name1"
692	fi
693	fi
694	#
695	# Include a touch of the target name so make can check
696	# if it's already been made.
697	wrt_touch
698	#
699	#--------------------------------------------------------------------#
700	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
701	#--------------------------------------------------------------------#
702	#
703	# Keep the script file name for Makefile dependencies.
704	PREV=${this_script}
705	# Set system_build envar for iteration targets
706	system_build=$basicsystem
707	done # for file in final-system/* ...
708	}
709
710	#--------------------------------------#
711	bootscripts_Makefiles() { #
712	#--------------------------------------#
713
714	# New versions of the book do not have bootscripts anymore
715	# (use systemd configuration files)
716	# Define a variable to be used for the right script directory to parse
717	if [ -d bootscripts ]; then
718	config="bootscripts"
719	else
720	config="system-config"
721	fi
722
723	if [[ "${METHOD}" = "chroot" ]]; then
724	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
725	else
726	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
727	fi
728
729	for file in $config/* ; do
730	# Keep the script file name
731	this_script=`basename $file`
732
733	case $this_script in
734	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
735	console) continue ;; # Use the files that came with the bootscripts
736	# fstab is now here (for 3.x.y)
737	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
738	*) ;;
739	esac
740
741	# First append each name of the script files to a list (this will become
742	# the names of the targets in the Makefile
743	bootscripttools="$bootscripttools $this_script"
744
745	# Grab the name of the target, strip id number, XXX-script.
746	# name1 is partially stripped and should be used for logging files.
747	# name is completely stripped and is used for grabbing
748	# the package name.
749	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
750	name=`echo $name1 \| sed -e 's@-64bit@@' \
751	-e 's@-64@@' \
752	-e 's@64@@' \
753	-e 's@n32@@'`
754	case $name in
755	bootscripts) name=bootscripts-cross-lfs ;;
756	*udev-rules) name=udev-cross-lfs ;;
757	esac
758
759	pkg_tarball=$(get_package_tarball_name $name)
760
761	#--------------------------------------------------------------------#
762	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
763	#--------------------------------------------------------------------#
764	#
765	# Drop in the name of the target on a new line, and the previous target
766	# as a dependency. Also call the echo_message function.
767	CHROOT_wrt_target "${this_script}" "$PREV"
768	#
769	# If $pkg_tarball isn't empty, we've got a package...
770	#
771	if [ "$pkg_tarball" != "" ] ; then
772	if [ "${INSTALL_LOG}" = "y" ] ; then
773	CHROOT_wrt_TouchTimestamp
774	fi
775	CHROOT_Unpack "$pkg_tarball"
776	fi
777	#
778	case $this_script in
779	fstab) if [[ -n "$FSTAB" ]]; then
780	CHROOT_wrt_CopyFstab
781	else
782	CHROOT_wrt_RunAsRoot "${file}"
783	fi
784	;;
785	*) CHROOT_wrt_RunAsRoot "${file}"
786	;;
787	esac
788	#
789	# Write installed files log and remove the build directory(ies)
790	# except if the package build fails.
791	if [ "$pkg_tarball" != "" ] ; then
792	CHROOT_wrt_RemoveBuildDirs "$name"
793	if [ "${INSTALL_LOG}" = "y" ] ; then
794	CHROOT_wrt_LogNewFiles "$name1"
795	fi
796	fi
797	#
798	# Include a touch of the target name so make can check if it's already been made.
799	wrt_touch
800	#
801	#--------------------------------------------------------------------#
802	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
803	#--------------------------------------------------------------------#
804	#
805	# Keep the script file name for Makefile dependencies.
806	PREV=$this_script
807
808	done # for file in bootscripts/* ...
809	}
810
811	#--------------------------------------#
812	network_Makefiles() { #
813	#--------------------------------------#
814
815	if [[ "${METHOD}" = "chroot" ]]; then
816	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
817	else
818	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
819	fi
820
821	for file in network/* ; do
822	# Keep the script file name
823	this_script=`basename $file`
824
825	case $this_script in
826	*choose) continue ;; # This is not a script but a commentary.
827	*dhcp) continue ;; # Assume static networking.
828	*dhcpcd) continue ;; # Assume static networking.
829	*) ;;
830	esac
831
832	# First append each name of the script files to a list (this will become
833	# the names of the targets in the Makefile
834	networktools="$networktools $this_script"
835
836	# Grab the name of the target, strip id number, XXX-script
837	# name1 is partially stripped and should be used for logging files.
838	# name is completely stripped and is used for grabbing
839	# the package name.
840	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
841	name=`echo $name1 \| sed -e 's@-64bit@@' \
842	-e 's@-64@@' \
843	-e 's@64@@' \
844	-e 's@n32@@'`
845	case $name in
846	network-scripts) name=clfs-network-scripts ;;
847	esac
848
849	pkg_tarball=$(get_package_tarball_name $name)
850
851	#--------------------------------------------------------------------#
852	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
853	#--------------------------------------------------------------------#
854	#
855	# Drop in the name of the target on a new line, and the previous target
856	# as a dependency. Also call the echo_message function.
857	CHROOT_wrt_target "${this_script}" "$PREV"
858	#
859	# If $pkg_tarball isn't empty, we've got a package...
860	#
861	if [ "$pkg_tarball" != "" ] ; then
862	if [ "${INSTALL_LOG}" = "y" ] ; then
863	CHROOT_wrt_TouchTimestamp
864	fi
865	CHROOT_Unpack "$pkg_tarball"
866	fi
867	#
868	CHROOT_wrt_RunAsRoot "${file}"
869	#
870	# Write installed files log and remove the build directory(ies)
871	# except if the package build fails.
872	if [ "$pkg_tarball" != "" ] ; then
873	CHROOT_wrt_RemoveBuildDirs "$name"
874	if [ "${INSTALL_LOG}" = "y" ] ; then
875	CHROOT_wrt_LogNewFiles "$name1"
876	fi
877	fi
878	#
879	# Include a touch of the target name so make can check if it's already been made.
880	wrt_touch
881	#
882	#--------------------------------------------------------------------#
883	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
884	#--------------------------------------------------------------------#
885	#
886	# Keep the script file name for Makefile dependencies.
887	PREV=$this_script
888
889	done # for file in network/* ...
890	}
891
892	#--------------------------------------#
893	bootable_Makefiles() { #
894	#--------------------------------------#
895
896	if [[ "${METHOD}" = "chroot" ]]; then
897	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
898	else
899	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
900	fi
901
902
903	for file in bootable/* ; do
904	# Keep the script file name
905	this_script=`basename $file`
906
907	# A little housekeeping on the scripts
908	case $this_script in
909	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
910	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
911	*kernel) # if there is no kernel config file do not build the kernel
912	[[ -z $CONFIG ]] && continue
913	# Copy the config file to /sources with a standardized name
914	cp $CONFIG $BUILDDIR/sources/kernel-config
915	;;
916	esac
917	#
918	# First append each name of the script files to a list (this will become
919	# the names of the targets in the Makefile
920	bootabletools="$bootabletools $this_script"
921	#
922	# Grab the name of the target, strip id number and misc words.
923	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
924	case $this_script in
925	kernel) name=linux
926	;;
927	esac
928
929	pkg_tarball=$(get_package_tarball_name $name)
930
931	#--------------------------------------------------------------------#
932	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
933	#--------------------------------------------------------------------#
934	#
935	# Drop in the name of the target on a new line, and the previous target
936	# as a dependency. Also call the echo_message function.
937	CHROOT_wrt_target "${this_script}" "$PREV"
938	#
939	# If $pkg_tarball isn't empty, we've got a package...
940	# Insert instructions for unpacking the package and changing directories
941	#
942	if [ "$pkg_tarball" != "" ] ; then
943	if [ "${INSTALL_LOG}" = "y" ] ; then
944	CHROOT_wrt_TouchTimestamp
945	fi
946	CHROOT_Unpack "$pkg_tarball"
947	fi
948	#
949	# Select a script execution method
950	case $this_script in
951	fstab) if [[ -n "$FSTAB" ]]; then
952	CHROOT_wrt_CopyFstab
953	else
954	CHROOT_wrt_RunAsRoot "${file}"
955	fi
956	;;
957	*) CHROOT_wrt_RunAsRoot "${file}"
958	;;
959	esac
960	#
961	# Write installed files log and remove the build directory(ies)
962	# except if the package build fails.
963	if [ "$pkg_tarball" != "" ] ; then
964	CHROOT_wrt_RemoveBuildDirs "$name"
965	if [ "${INSTALL_LOG}" = "y" ] ; then
966	CHROOT_wrt_LogNewFiles "$name"
967	fi
968	fi
969	#
970	# Include a touch of the target name so make can check if it's already been made.
971	wrt_touch
972	#
973	#--------------------------------------------------------------------#
974	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
975	#--------------------------------------------------------------------#
976	#
977	# Keep the script file name for Makefile dependencies.
978	PREV=$this_script
979
980	done
981
982	}
983
984
985	#--------------------------------------#
986	build_Makefile() { # Construct a Makefile from the book scripts
987	#--------------------------------------#
988
989	echo "...Creating Makefile... ${BOLD}START${OFF}"
990
991	cd $JHALFSDIR/${PROGNAME}-commands
992	# Start with clean files
993	>$MKFILE
994	>$MKFILE.tmp
995
996	method_cmds=${METHOD}_Makefiles
997
998	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
999	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
1000	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
1001	temptools_Makefiles # mk_TEMP (LUSER) $temptools
1002	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1003	if [[ ! $TEST = "0" ]]; then
1004	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
1005	fi
1006	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
1007	# Add the iterations targets, if needed
1008	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
1009	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1010	if [ -d network ]; then
1011	network_Makefiles # If present, process network setup.
1012	fi
1013	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
1014
1015	# Add the CUSTOM_TOOLS targets, if needed
1016	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
1017
1018	# Add a header, some variables and include the function file
1019	# to the top of the real Makefile.
1020	wrt_Makefile_header
1021
1022	# Add chroot commands
1023	if [ "$METHOD" = "chroot" ] ; then
1024	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
1025	chroot=`cat chroot/???-chroot \| \
1026	sed -e "s@chroot@$CHROOT_LOC@" \
1027	-e '/#!\/bin\/bash/d' \
1028	-e '/^export/d' \
1029	-e '/^logout/d' \
1030	-e 's@ \\\@ @g' \| \
1031	tr -d '\n' \| \
1032	sed -e 's/ */ /g' \
1033	-e 's\|\\$\|&&\|g' \
1034	-e 's\|exit\|\|g' \
1035	-e 's\|$\| -c\|' \
1036	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
1037	-e 's\|set -e\|\|' \
1038	-e 's\|set +h\|\|'`
1039	echo -e "CHROOT1= $chroot\n" >> $MKFILE
1040	fi
1041
1042	################## CHROOT ####################
1043
1044	if [[ "${METHOD}" = "chroot" ]]; then
1045	(
1046	cat << EOF
1047
1048	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
1049	@sudo make do-housekeeping
1050	@echo "$VERSION - jhalfs build" > clfs-release && \\
1051	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
1052	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
1053	@\$(call echo_finished,$VERSION)
1054
1055	ck_UID:
1056	@if [ \`id -u\` = "0" ]; then \\
1057	echo "+--------------------------------------------------+"; \\
1058	echo "\|You cannot run this makefile from the root account\|"; \\
1059	echo "+--------------------------------------------------+"; \\
1060	exit 1; \\
1061	fi
1062
1063	#---------------AS ROOT
1064	mk_SETUP:
1065	@\$(call echo_SU_request)
1066	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1067	@touch \$@
1068
1069	#---------------AS LUSER
1070	mk_F_PREPS: mk_SETUP
1071	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
1072	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1073	@sudo make restore-luser-env
1074	@touch \$@
1075
1076	mk_SUDO: mk_F_PREPS
1077	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1078	@touch \$@
1079
1080	#---------------CHROOT JAIL
1081	mk_SYSTOOLS: mk_SUDO
1082	@\$(call echo_CHROOT_request)
1083	@\$(call echo_PHASE, CHROOT JAIL )
1084	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
1085	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
1086	@touch \$@
1087
1088	mk_BLFS_TOOL: create-sbu_du-report
1089	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1090	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1091	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
1092	fi;
1093	@touch \$@
1094
1095	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1096	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1097	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1098	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
1099	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
1100	fi;
1101	@touch \$@
1102
1103	SETUP: $host_prep
1104	AS_LUSER: $final_preps $cross_tools $temptools
1105	SUDO: $orphan_scripts
1106	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
1107	PREP_CHROOT_JAIL: ${chroottools}
1108	CHROOT_JAIL: SHELL=/tools/bin/bash
1109	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
1110	CUSTOM_TOOLS: $custom_list
1111
1112
1113	create-sbu_du-report: mk_SYSTOOLS
1114	@\$(call echo_message, Building)
1115	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
1116	./create-sbu_du-report.sh logs $VERSION; \\
1117	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1118	fi;
1119	@touch \$@
1120
1121	do-housekeeping:
1122	@-umount \$(MOUNT_PT)/dev/pts
1123	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
1124	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
1125	umount \$(MOUNT_PT)/\$\$link; \\
1126	unset link; \\
1127	else \\
1128	umount \$(MOUNT_PT)/dev/shm; \\
1129	fi
1130	@-umount \$(MOUNT_PT)/dev
1131	@-umount \$(MOUNT_PT)/sys
1132	@-umount \$(MOUNT_PT)/proc
1133	@-rm /tools /cross-tools
1134	@-if [ ! -f luser-exist ]; then \\
1135	userdel \$(LUSER); \\
1136	rm -rf \$(LUSER_HOME); \\
1137	fi;
1138
1139	EOF
1140	) >> $MKFILE
1141
1142	fi
1143
1144	################### BOOT #####################
1145
1146	if [[ "${METHOD}" = "boot" ]]; then
1147	(
1148	cat << EOF
1149
1150	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
1151	@sudo make restore-luser-env
1152	@sudo make do-housekeeping
1153	@\$(call echo_boot_finished,$VERSION)
1154
1155	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
1156	@echo "$VERSION - jhalfs build" > /etc/clfs-release
1157	@\$(call echo_finished,$VERSION)
1158
1159
1160	ck_UID:
1161	@if [ \`id -u\` = "0" ]; then \\
1162	echo "+--------------------------------------------------+"; \\
1163	echo "\|You cannot run this makefile from the root account\|"; \\
1164	echo "\|However, if this is the boot environment \|"; \\
1165	echo "\| the command you are looking for is \|"; \\
1166	echo "\| make makesys \|"; \\
1167	echo "\| to complete the build \|"; \\
1168	echo "+--------------------------------------------------+"; \\
1169	exit 1; \\
1170	fi
1171
1172	#---------------AS ROOT
1173
1174	mk_SETUP:
1175	@\$(call echo_SU_request)
1176	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1177	@touch \$@
1178
1179	#---------------AS LUSER
1180
1181	mk_F_PREPS: mk_SETUP
1182	@\$(call echo_PHASE,Final Preparations and Cross Tools)
1183	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1184	@touch \$@
1185
1186	mk_SUDO: mk_F_PREPS
1187	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1188	@touch \$@
1189
1190	#---------------AS ROOT
1191
1192	mk_FINAL:
1193	@\$(call echo_PHASE,Final System)
1194	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
1195	@touch \$@
1196
1197	mk_BLFS_TOOL: mk_FINAL
1198	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1199	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1200	( make -C $BLFS_ROOT/work ); \\
1201	fi;
1202	@touch \$@
1203
1204	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1205	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1206	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1207	mkdir -p ${TRACKING_DIR}; \\
1208	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
1209	fi;
1210	@touch \$@
1211
1212	SETUP: $host_prep
1213	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
1214	SUDO: $orphan_scripts
1215	AS_ROOT: SHELL=/tools/bin/bash
1216	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1217	CUSTOM_TOOLS: $custom_list
1218
1219	do-housekeeping:
1220	@-rm /tools /cross-tools
1221	@-if [ ! -f luser-exist ]; then \\
1222	userdel \$(LUSER); \\
1223	rm -rf \$(LUSER_HOME); \\
1224	fi;
1225
1226	EOF
1227	) >> $MKFILE
1228	fi
1229
1230	(
1231	cat << EOF
1232
1233	restore-luser-env:
1234	@\$(call echo_message, Building)
1235	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
1236	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
1237	fi;
1238	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
1239	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
1240	fi;
1241	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
1242	touch \$@ && \\
1243	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1244	echo --------------------------------------------------------------------------------\$(WHITE)
1245
1246	########################################################
1247
1248
1249	EOF
1250	) >> $MKFILE
1251
1252	# Bring over the items from the Makefile.tmp
1253	cat $MKFILE.tmp >> $MKFILE
1254	rm $MKFILE.tmp
1255
1256	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1257	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: