Context Navigation

source: CLFS/master.sh@ c5ff430

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since c5ff430 was 010627d, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Fixed a small bug.
Property mode set to `100644`
File size: 33.7 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@mkdir \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
25	mkdir \$(MOUNT_PT)/sources; \\
26	fi;
27	@chmod a+wt \$(MOUNT_PT)/sources && \\
28	touch \$@ && \\
29	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
30	echo --------------------------------------------------------------------------------\$(WHITE)
31
32	024-creatingcrossdir: 023-creatingtoolsdir
33	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
34	rm -f /cross-tools && \\
35	ln -s \$(MOUNT_PT)/cross-tools /
36	@touch \$@ && \\
37	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
38	echo --------------------------------------------------------------------------------\$(WHITE)
39
40	025-addinguser: 024-creatingcrossdir
41	@\$(call echo_message, Building)
42	@if [ ! -d /home/\$(LUSER) ]; then \\
43	groupadd \$(LGROUP); \\
44	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
45	else \\
46	touch luser-exist; \\
47	fi;
48	@chown \$(LUSER) \$(MOUNT_PT) && \\
49	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
50	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
51	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
52	touch \$@ && \\
53	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
54	echo --------------------------------------------------------------------------------\$(WHITE)
55
56	026-settingenvironment: 025-addinguser
57	@\$(call echo_message, Building)
58	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
59	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
60	fi;
61	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
62	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
63	fi;
64	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
65	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
66	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
67	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
68	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
69	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
70	echo "" >> /home/\$(LUSER)/.bashrc && \\
71	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
72	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
73	echo "" >> /home/\$(LUSER)/.bashrc && \\
74	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
75	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
76	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
77	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
78	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
79	touch envars && \\
80	chmod -R a+wt \$(MOUNT_PT) && \\
81	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
82	touch \$@ && \\
83	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
84	echo --------------------------------------------------------------------------------\$(WHITE)
85	EOF
86	) >> $MKFILE.tmp
87	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
88
89	}
90
91	#--------------------------------------#
92	cross_tools_Makefiles() { #
93	#--------------------------------------#
94	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
95
96	for file in cross-tools/* ; do
97	# Keep the script file name
98	this_script=`basename $file`
99	#
100	# Skip this script...
101	case $this_script in
102	cflags \| variables ) # work done in host_prep_Makefiles
103	continue; ;;
104	*) ;;
105	esac
106	#
107	# Set the dependency for the first target.
108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
109
110	# First append each name of the script files to a list (this will become
111	# the names of the targets in the Makefile
112	cross_tools="$cross_tools $this_script"
113
114	# Grab the name of the target (minus the -headers or -cross in the case of gcc
115	# and binutils in chapter 5)
116	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
117	-e 's@-static@@' \
118	-e 's@-final@@' \
119	-e 's@-64@@' \
120	-e 's@-n32@@'`
121	pkg_tarball=$(get_package_tarball_name $name)
122
123	#--------------------------------------------------------------------#
124	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
125	#--------------------------------------------------------------------#
126	#
127	# Drop in the name of the target on a new line, and the previous target
128	# as a dependency. Also call the echo_message function.
129	LUSER_wrt_target "${this_script}" "$PREV"
130	#
131	# If $pkg_tarball isn't empty, we've got a package...
132	#
133	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
134	#
135	LUSER_wrt_RunAsUser "${file}"
136	#
137	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
138	#
139	# Include a touch of the target name so make can check if it's already been made.
140	wrt_touch
141	#
142	#--------------------------------------------------------------------#
143	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
144	#--------------------------------------------------------------------#
145	#
146	# Keep the script file name for Makefile dependencies.
147	PREV=$this_script
148
149	done # for file in ....
150	}
151
152	#--------------------------------------#
153	temptools_Makefiles() { #
154	#--------------------------------------#
155	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
156
157	for file in temp-system/* ; do
158	# Keep the script file name
159	this_script=`basename $file`
160	#
161	# Deal with any odd scripts..
162	case $this_script in
163	*choose) # The choose script will fail if you cannot enter the new environment
164	# If the 'boot' build method was chosen don't run the script
165	[[ $METHOD = "boot" ]] && continue; ;;
166	*) ;;
167	esac
168
169	#
170	# First append each name of the script files to a list (this will become
171	# the names of the targets in the Makefile
172	temptools="$temptools $this_script"
173
174	#
175	# Grab the name of the target, strip id number, XXX-script
176	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
177	#
178	pkg_tarball=$(get_package_tarball_name $name)
179
180	#--------------------------------------------------------------------#
181	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
182	#--------------------------------------------------------------------#
183	#
184	# Drop in the name of the target on a new line, and the previous target
185	# as a dependency. Also call the echo_message function.
186	LUSER_wrt_target "${this_script}" "$PREV"
187	#
188	# If $pkg_tarball isn't empty, we've got a package...
189	# Insert instructions for unpacking the package and to set the PKGDIR variable.
190	#
191	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
192	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
193	#
194	LUSER_wrt_RunAsUser "${file}"
195	#
196	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
197	#
198	# Include a touch of the target name so make can check if it's already been made.
199	wrt_touch
200	#
201	#--------------------------------------------------------------------#
202	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
203	#--------------------------------------------------------------------#
204	#
205	# Keep the script file name for Makefile dependencies.
206	PREV=$this_script
207	done # for file in ....
208	}
209
210
211	#--------------------------------------#
212	chroot_Makefiles() { #
213	#--------------------------------------#
214	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
215
216	for file in chroot/* ; do
217	# Keep the script file name
218	this_script=`basename $file`
219	#
220	# Skipping scripts is done now and not included in the build tree.
221	case $this_script in
222	chroot) continue ;;
223	esac
224
225	#
226	# First append each name of the script files to a list (this will become
227	# the names of the targets in the Makefile
228	case "${this_script}" in
229	*util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
230	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
231	*) chroottools="$chroottools $this_script" ;;
232	esac
233
234	# Grab the name of the target, strip id number, XXX-script
235	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
236
237	pkg_tarball=$(get_package_tarball_name $name)
238
239	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
240	# .. Customized makefile entry
241	case "${this_script}" in
242	*util-linux)
243	LUSER_wrt_target "${this_script}" "$PREV"
244	LUSER_wrt_unpack "$pkg_tarball"
245	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
246	LUSER_wrt_RunAsUser "${file}"
247	LUSER_RemoveBuildDirs "${name}"
248	wrt_touch
249	temptools="$temptools $this_script"
250	continue ;;
251	esac
252
253
254	#--------------------------------------------------------------------#
255	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
256	#--------------------------------------------------------------------#
257	#
258	# Drop in the name of the target on a new line, and the previous target
259	# as a dependency. Also call the echo_message function.
260	CHROOT_wrt_target "${this_script}" "$PREV"
261	#
262	# If $pkg_tarball isn't empty, we've got a package...
263	# Insert instructions for unpacking the package and changing directories
264	#
265	if [ "$pkg_tarball" != "" ] ; then
266	CHROOT_Unpack "$pkg_tarball"
267	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
268	fi
269	#
270	# Select a script execution method
271	case $this_script in
272	*kernfs) wrt_RunAsRoot "${file}" ;;
273	*) CHROOT_wrt_RunAsRoot "${file}" ;;
274	esac
275	#
276	# Housekeeping...remove the build directory(ies), except if the package build fails.
277	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
278	#
279	# Include a touch of the target name so make can check if it's already been made.
280	wrt_touch
281	#
282	#--------------------------------------------------------------------#
283	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
284	#--------------------------------------------------------------------#
285	#
286	# Keep the script file name for Makefile dependencies.
287	PREV=$this_script
288
289	done # for file in...
290	}
291
292
293	#--------------------------------------#
294	boot_Makefiles() { #
295	#--------------------------------------#
296
297	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
298	#
299	# Create a target bootable partition containing a compile environment. Later
300	# on we boot into this environment and contine the build.
301	#
302	for file in boot/* ; do
303	# Keep the script file name
304	this_script=`basename $file`
305
306	# A little housekeeping on the scripts
307	case $this_script in
308	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
309	whatnext) continue ;;
310	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
311	*kernel) # if there is no kernel config file do not build the kernel
312	[[ -z $CONFIG ]] && continue
313	# Copy the config file to /sources with a standardized name
314	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
315	;;
316	esac
317	#
318	# First append each name of the script files to a list (this will become
319	# the names of the targets in the Makefile
320	case "${this_script}" in
321	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
322	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
323	*) boottools="$boottools $this_script" ;;
324	esac
325	#
326	# Grab the name of the target, strip id number and misc words.
327	case $this_script in
328	*kernel) name=linux ;;
329	*bootscripts) name="bootscripts-cross-lfs" ;;
330	*udev-rules) name="udev-cross-lfs" ;;
331	*grub-build) name=grub ;;
332	*-aboot-build) name=aboot ;;
333	*yaboot-build) name=yaboot ;;
334	*colo-build) name=colo ;;
335	*silo-build) name=silo ;;
336	*arcload-build) name=arcload ;;
337	*lilo-build) name=lilo ;;
338	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
339	esac
340	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
341	pkg_tarball=$(get_package_tarball_name $name)
342
343	#--------------------------------------------------------------------#
344	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
345	#--------------------------------------------------------------------#
346	#
347	# Drop in the name of the target on a new line, and the previous target
348	# as a dependency. Also call the echo_message function.
349	LUSER_wrt_target "${this_script}" "$PREV"
350	#
351	# If $pkg_tarball isn't empty, we've got a package...
352	# Insert instructions for unpacking the package and changing directories
353	#
354	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
355	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
356	#
357	# Select a script execution method
358	case $this_script in
359	# The following 2 scripts are defined in the /boot directory but need
360	# to be run as a root user. Set them up here but run them in another phase
361	changingowner) wrt_RunAsRoot "${file}" ;;
362	devices) wrt_RunAsRoot "${file}" ;;
363	fstab) if [[ -n "$FSTAB" ]]; then
364	LUSER_wrt_CopyFstab
365	else
366	LUSER_wrt_RunAsUser "${file}"
367	fi
368	;;
369	*) LUSER_wrt_RunAsUser "${file}" ;;
370	esac
371	#
372	# Housekeeping...remove any build directory(ies) except if the package build fails.
373	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
374	#
375	# Include a touch of the target name so make can check if it's already been made.
376	wrt_touch
377	#
378	#--------------------------------------------------------------------#
379	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
380	#--------------------------------------------------------------------#
381	#
382	# Keep the script file name for Makefile dependencies.
383	PREV=$this_script
384
385	done
386	}
387
388
389	#--------------------------------------#
390	testsuite_tools_Makefiles() { #
391	#--------------------------------------#
392
393	if [[ "${METHOD}" = "chroot" ]]; then
394	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
395	else
396	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
397	PREV=""
398	fi
399
400	for file in testsuite-tools/* ; do
401	# Keep the script file name
402	this_script=`basename $file`
403
404	# First append each name of the script files to a list (this will become
405	# the names of the targets in the Makefile
406	testsuitetools="$testsuitetools $this_script"
407
408	# Grab the name of the target, strip id number, XXX-script
409	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
410	-e 's@-64bit@@' \
411	-e 's@-64@@' \
412	-e 's@64@@' \
413	-e 's@n32@@'`
414
415	pkg_tarball=$(get_package_tarball_name $name)
416
417	#--------------------------------------------------------------------#
418	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
419	#--------------------------------------------------------------------#
420	#
421	# Drop in the name of the target on a new line, and the previous target
422	# as a dependency. Also call the echo_message function.
423	CHROOT_wrt_target "${this_script}" "$PREV"
424	#
425	CHROOT_Unpack "$pkg_tarball"
426	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
427	#
428	CHROOT_wrt_RunAsRoot "${file}"
429	#
430	CHROOT_wrt_RemoveBuildDirs "${name}"
431	#
432	# Include a touch of the target name so make can check if it's already been made.
433	wrt_touch
434	#
435	#--------------------------------------------------------------------#
436	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
437	#--------------------------------------------------------------------#
438	#
439	# Keep the script file name for Makefile dependencies.
440	PREV=$this_script
441
442	done
443	}
444
445
446	#--------------------------------------#
447	final_system_Makefiles() { #
448	#--------------------------------------#
449	# Set envars and scripts for iteration targets
450	LOGS="" # Start with an empty global LOGS envar
451	if [[ -z "$1" ]] ; then
452	local N=""
453	# In boot method the makesys phase was initiated in testsuite_tools_makefile
454	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
455	else
456	local N=-build_$1
457	local basicsystem=""
458	mkdir final-system$N
459	cp final-system/* final-system$N
460	for script in final-system$N/* ; do
461	# Overwrite existing symlinks, files, and dirs
462	sed -e 's/ln -sv/&f/g' \
463	-e 's/mv -v/&f/g' \
464	-e 's/mkdir -v/&p/g' -i ${script}
465	done
466	# Remove Bzip2 binaries before make install
467	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
468	# Delete *old Readline libraries just after make install
469	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
470	fi
471
472	if [[ "${METHOD}" = "chroot" ]]; then
473	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
474	else
475	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
476	fi
477
478	for file in final-system$N/* ; do
479	# Keep the script file name
480	this_script=`basename $file`
481
482	# Test if the stripping phase must be skipped.
483	# Skip alsp temp-perl for iterative runs
484	case $this_script in
485	stripping) [[ "$STRIP" = "n" ]] && continue ;;
486	temp-perl) [[ -n "$N" ]] && continue ;;
487	esac
488
489	# Grab the name of the target, strip id number, XXX-script
490	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
491	-e 's@temp-@@' \
492	-e 's@-64bit@@' \
493	-e 's@-64@@' \
494	-e 's@64@@' \
495	-e 's@n32@@'`
496
497	# Find the version of the command files, if it corresponds with the building of
498	# a specific package. We need this here to can skip scripts not needed for
499	# iterations rebuilds
500	pkg_tarball=$(get_package_tarball_name $name)
501
502	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
503	case "${this_script}" in
504	stripping) ;;
505	*) continue ;;
506	esac
507	fi
508
509	# Append each name of the script files to a list (this will become
510	# the names of the targets in the Makefile
511	basicsystem="$basicsystem ${this_script}${N}"
512
513	# Append each name of the script files to a list (this will become
514	# the names of the logs to be moved for each iteration)
515	LOGS="$LOGS ${this_script}"
516
517	#--------------------------------------------------------------------#
518	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
519	#--------------------------------------------------------------------#
520	#
521	# Drop in the name of the target on a new line, and the previous target
522	# as a dependency. Also call the echo_message function.
523	CHROOT_wrt_target "${this_script}${N}" "$PREV"
524
525	# If $pkg_tarball isn't empty, we've got a package...
526	if [ "$pkg_tarball" != "" ] ; then
527	CHROOT_Unpack "$pkg_tarball"
528	# If the testsuites must be run, initialize the log file
529	case $name in
530	binutils \| gcc \| glibc )
531	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
532	;;
533	* )
534	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
535	;;
536	esac
537	# If using optimizations, write the instructions
538	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
539	fi
540	#
541	CHROOT_wrt_RunAsRoot "${file}"
542	#
543	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
544	#
545	# Include a touch of the target name so make can check if it's already been made.
546	wrt_touch
547	#
548	#--------------------------------------------------------------------#
549	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
550	#--------------------------------------------------------------------#
551	#
552	# Keep the script file name for Makefile dependencies.
553	PREV=${this_script}${N}
554	# Set system_build envar for iteration targets
555	system_build=$basicsystem
556	done # for file in final-system/* ...
557	}
558
559	#--------------------------------------#
560	bootscripts_Makefiles() { #
561	#--------------------------------------#
562
563	if [[ "${METHOD}" = "chroot" ]]; then
564	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
565	else
566	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
567	fi
568
569	for file in bootscripts/* ; do
570	# Keep the script file name
571	this_script=`basename $file`
572
573	case $this_script in
574	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
575	console) continue ;; # Use the files that came with the bootscripts
576	*) ;;
577	esac
578
579	# First append each name of the script files to a list (this will become
580	# the names of the targets in the Makefile
581	bootscripttools="$bootscripttools $this_script"
582
583	# Grab the name of the target, strip id number, XXX-script
584	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
585	-e 's@-64bit@@' \
586	-e 's@-64@@' \
587	-e 's@64@@' \
588	-e 's@n32@@'`
589	case $name in
590	bootscripts) name=bootscripts-cross-lfs ;;
591	*udev-rules) name=udev-cross-lfs ;;
592	esac
593
594	pkg_tarball=$(get_package_tarball_name $name)
595
596	#--------------------------------------------------------------------#
597	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
598	#--------------------------------------------------------------------#
599	#
600	# Drop in the name of the target on a new line, and the previous target
601	# as a dependency. Also call the echo_message function.
602	CHROOT_wrt_target "${this_script}" "$PREV"
603	#
604	# If $pkg_tarball isn't empty, we've got a package...
605	#
606	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
607	#
608	CHROOT_wrt_RunAsRoot "${file}"
609	#
610	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
611	#
612	# Include a touch of the target name so make can check if it's already been made.
613	wrt_touch
614	#
615	#--------------------------------------------------------------------#
616	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
617	#--------------------------------------------------------------------#
618	#
619	# Keep the script file name for Makefile dependencies.
620	PREV=$this_script
621
622	done # for file in bootscripts/* ...
623	}
624
625	#--------------------------------------#
626	bootable_Makefiles() { #
627	#--------------------------------------#
628
629	if [[ "${METHOD}" = "chroot" ]]; then
630	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
631	else
632	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
633	fi
634
635
636	for file in {bootable,the-end}/* ; do
637	# Keep the script file name
638	this_script=`basename $file`
639
640	# A little housekeeping on the scripts
641	case $this_script in
642	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
643	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
644	*kernel) # if there is no kernel config file do not build the kernel
645	[[ -z $CONFIG ]] && continue
646	# Copy the config file to /sources with a standardized name
647	cp $CONFIG $BUILDDIR/sources/kernel-config
648	;;
649	esac
650	#
651	# First append each name of the script files to a list (this will become
652	# the names of the targets in the Makefile
653	bootabletools="$bootabletools $this_script"
654	#
655	# Grab the name of the target, strip id number and misc words.
656	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
657	case $this_script in
658	kernel) name=linux
659	;;
660	esac
661
662	pkg_tarball=$(get_package_tarball_name $name)
663
664	#--------------------------------------------------------------------#
665	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
666	#--------------------------------------------------------------------#
667	#
668	# Drop in the name of the target on a new line, and the previous target
669	# as a dependency. Also call the echo_message function.
670	CHROOT_wrt_target "${this_script}" "$PREV"
671	#
672	# If $pkg_tarball isn't empty, we've got a package...
673	# Insert instructions for unpacking the package and changing directories
674	#
675	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
676	#
677	# Select a script execution method
678	case $this_script in
679	fstab) if [[ -n "$FSTAB" ]]; then
680	CHROOT_wrt_CopyFstab
681	else
682	CHROOT_wrt_RunAsRoot "${file}"
683	fi
684	;;
685	*) CHROOT_wrt_RunAsRoot "${file}"
686	;;
687	esac
688	#
689	# Housekeeping...remove any build directory(ies) except if the package build fails.
690	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
691	#
692	# Include a touch of the target name so make can check if it's already been made.
693	wrt_touch
694	#
695	#--------------------------------------------------------------------#
696	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
697	#--------------------------------------------------------------------#
698	#
699	# Keep the script file name for Makefile dependencies.
700	PREV=$this_script
701
702	done
703
704	}
705
706
707	#--------------------------------------#
708	build_Makefile() { # Construct a Makefile from the book scripts
709	#--------------------------------------#
710	#
711	# Script crashes if error trapping is on
712	#
713	set +e
714	declare -f method_cmds
715	set -e
716
717	echo "...Creating Makefile... ${BOLD}START${OFF}"
718
719	cd $JHALFSDIR/${PROGNAME}-commands
720	# Start with a clean files
721	>$MKFILE
722	>$MKFILE.tmp
723
724	method_cmds=${METHOD}_Makefiles
725
726	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
727	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
728	temptools_Makefiles # mk_TEMP (LUSER) $temptools
729	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
730	if [[ ! $TEST = "0" ]]; then
731	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
732	fi
733	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
734	# Add the iterations targets, if needed
735	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
736	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
737	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
738
739	# Add the BLFS_TOOL targets, if needed
740	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
741
742	# Add a header, some variables and include the function file
743	# to the top of the real Makefile.
744	wrt_Makefile_header
745
746	# Add chroot commands
747	if [ "$METHOD" = "chroot" ] ; then
748	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
749	chroot=`cat chroot/chroot \| \
750	sed -e "s@chroot@$CHROOT_LOC@" \
751	-e '/#!\/tools\/bin\/bash/d' \
752	-e '/^export/d' \
753	-e '/^logout/d' \
754	-e 's@ \\\@ @g' \| \
755	tr -d '\n' \| \
756	sed -e 's/ */ /g' \
757	-e 's\|\\$\|&&\|g' \
758	-e 's\|exit\|\|g' \
759	-e 's\|$\| -c\|' \
760	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
761	-e 's\|set -e\|\|'`
762	echo -e "CHROOT1= $chroot\n" >> $MKFILE
763	fi
764
765	################## CHROOT ####################
766
767	if [[ "${METHOD}" = "chroot" ]]; then
768	(
769	cat << EOF
770
771	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_BLFS_TOOL
772	@sudo make do-housekeeping
773	@\$(call echo_finished,$VERSION)
774
775	ck_UID:
776	@if [ \`id -u\` = "0" ]; then \\
777	echo "+--------------------------------------------------+"; \\
778	echo "\|You cannot run this makefile from the root account\|"; \\
779	echo "+--------------------------------------------------+"; \\
780	exit 1; \\
781	fi
782
783	#---------------AS ROOT
784	mk_SETUP:
785	@\$(call echo_SU_request)
786	@sudo make SHELL=/bin/bash SETUP
787	@touch \$@
788
789	#---------------AS LUSER
790	mk_CROSS: mk_SETUP
791	@\$(call echo_PHASE,Cross and Temporary Tools)
792	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
793	@sudo make restore-luser-env
794	@touch \$@
795
796	mk_SUDO: mk_CROSS
797	@sudo make SHELL=/bin/bash SUDO
798	@touch \$@
799	#
800	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
801	# chroot environment. (Unless someone knows a different way)
802	# Manually create the /bin directory and provide link to the /tools dir.
803	# Also change the original symlink creation to include (f)orce to prevent failure due to
804	# pre-existing links.
805
806	#---------------CHROOT JAIL
807	mk_SYSTOOLS: mk_SUDO
808	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
809	mkdir \$(MOUNT_PT)/bin; \\
810	cd \$(MOUNT_PT)/bin && \\
811	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
812	sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
813	fi;
814	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/*-createfiles
815	@\$(call echo_CHROOT_request)
816	@\$(call echo_PHASE, CHROOT JAIL )
817	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
818	@touch \$@
819
820	mk_BLFS_TOOL: create-sbu_du-report
821	@\$(call echo_PHASE,Building BLFS-TOOLS)
822	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
823	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
824	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
825	fi;
826	@touch \$@
827
828	SETUP: $host_prep
829	AS_LUSER: $cross_tools $temptools
830	SUDO: $orphan_scripts
831	CHROOT_JAIL: ${chroottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
832	BLFS_TOOL: $blfs_tool
833
834
835	create-sbu_du-report: mk_SYSTOOLS
836	@\$(call echo_message, Building)
837	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
838	./create-sbu_du-report.sh logs $VERSION; \\
839	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
840	fi;
841	@touch \$@
842
843	do-housekeeping:
844	@-umount \$(MOUNT_PT)/dev/pts
845	@-umount \$(MOUNT_PT)/dev/shm
846	@-umount \$(MOUNT_PT)/dev
847	@-umount \$(MOUNT_PT)/sys
848	@-umount \$(MOUNT_PT)/proc
849	@-rm /tools /cross-tools
850	@-if [ ! -f luser-exist ]; then \\
851	userdel \$(LUSER); \\
852	rm -rf /home/\$(LUSER); \\
853	fi;
854
855	EOF
856	) >> $MKFILE
857
858	fi
859
860	################### BOOT #####################
861
862	if [[ "${METHOD}" = "boot" ]]; then
863	(
864	cat << EOF
865
866	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
867	@sudo make restore-luser-env
868	@sudo make do-housekeeping
869	@\$(call echo_boot_finished,$VERSION)
870
871	makesys: mk_FINAL mk_BLFS_TOOL
872	@\$(call echo_finished,$VERSION)
873
874
875	ck_UID:
876	@if [ \`id -u\` = "0" ]; then \\
877	echo "+--------------------------------------------------+"; \\
878	echo "\|You cannot run this makefile from the root account\|"; \\
879	echo "\|However, if this is the boot environment \|"; \\
880	echo "\| the command you are looking for is \|"; \\
881	echo "\| make makesys \|"; \\
882	echo "\| to finish off the build \|"; \\
883	echo "+--------------------------------------------------+"; \\
884	exit 1; \\
885	fi
886
887	#---------------AS ROOT
888
889	mk_SETUP:
890	@\$(call echo_SU_request)
891	@sudo make SHELL=/bin/bash SETUP
892	@touch \$@
893
894	#---------------AS LUSER
895
896	mk_CROSS: mk_SETUP
897	@\$(call echo_PHASE,Cross Tool)
898	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
899	@touch \$@
900
901	mk_SUDO: mk_CROSS
902	@sudo make SHELL=/bin/bash SUDO
903	@touch \$@
904
905	#---------------AS ROOT
906
907	mk_FINAL:
908	@\$(call echo_PHASE,Final System)
909	@( source /root/.bash_profile && make AS_ROOT )
910	@touch \$@
911
912	mk_BLFS_TOOL: mk_FINAL
913	@\$(call echo_PHASE,Building BLFS-TOOLS)
914	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
915	mkdir -p $TRACKING_DIR; \\
916	( make BLFS_TOOL ); \\
917	fi
918	@touch \$@
919
920	SETUP: $host_prep
921	AS_LUSER: $cross_tools $temptools ${boottools}
922	SUDO: $orphan_scripts
923	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
924	BLFS_TOOL: $blfs_tool
925
926	do-housekeeping:
927	@-rm /tools /cross-tools
928	@-if [ ! -f luser-exist ]; then \\
929	userdel \$(LUSER); \\
930	rm -rf /home/\$(LUSER); \\
931	fi;
932
933	EOF
934	) >> $MKFILE
935	fi
936
937	(
938	cat << EOF
939
940	restore-luser-env:
941	@\$(call echo_message, Building)
942	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
943	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
944	fi;
945	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
946	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
947	fi;
948	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
949	touch \$@ && \\
950	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
951	echo --------------------------------------------------------------------------------\$(WHITE)
952
953	########################################################
954
955
956	EOF
957	) >> $MKFILE
958
959	# Bring over the items from the Makefile.tmp
960	cat $MKFILE.tmp >> $MKFILE
961	rm $MKFILE.tmp
962
963	echo "Creating Makefile... ${BOLD}DONE${OFF}"
964	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: