Context Navigation

source: CLFS2/master.sh@ 9e0c4b6

ablfs-more legacy trunk

Last change on this file since 9e0c4b6 was c57747d, checked in by Pierre Labastie <pierre@…>, 7 years ago
Make the date of the SBU_DU file the same as the one reported at the end of the jhalfs run. Note that date is the one when the run is started
Property mode set to `100644`
File size: 18.6 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[7432834]	2	# $Id$
	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9	#----------------------------#
	10	host_prep_Makefiles() { # Initialization of the system
	11	#----------------------------#
	12	local CLFS_HOST
	13
[045b2dc]	14	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[7432834]	15
	16	# defined here, only for ease of reading
	17	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
	18	(
	19	cat << EOF
	20
[9ae0875]	21	025-addinguser:
[7432834]	22	@\$(call echo_message, Building)
[962793a]	23	@if [ ! -d \$(LUSER_HOME) ]; then \\
[6ad5a2f]	24	groupadd \$(LGROUP); \\
	25	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[7432834]	26	else \\
[6ad5a2f]	27	touch luser-exist; \\
[7432834]	28	fi;
[dbcdfd7]	29	@\$(call housekeeping)
[7432834]	30
	31	026-settingenvironment: 025-addinguser
	32	@\$(call echo_message, Building)
[962793a]	33	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	34	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[7432834]	35	fi;
[962793a]	36	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	37	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[7432834]	38	fi;
[962793a]	39	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	40	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	41	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	42	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	43	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	44	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	45	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	46	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	47	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
[5f154f1]	48	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
[962793a]	49	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	50	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	51	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	52	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	53	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[045b2dc]	54	touch envars && \\
[9ae0875]	55	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	56	@\$(call housekeeping)
[7432834]	57
	58	027-create-directories: 026-settingenvironment
	59	@\$(call echo_message, Building)
	60
	61	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
	62	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
	63	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
	64	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
	65	@install -d -m 0750 \$(MOUNT_PT)/root
	66	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
	67	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
	68	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
	69	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
	70	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
	71	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
	72	ln -s share/{man,doc,info} \$\$dir ; \\
	73	done
[dbcdfd7]	74	@\$(call housekeeping)
[7432834]	75
	76	028-creating-sysfile: 027-create-directories
	77	@\$(call echo_message, Building)
	78
	79	@touch \$(MOUNT_PT)/etc/mtab
	80	@echo "root::0:0:root:/root:/bin/bash" >> \$(MOUNT_PT)/etc/passwd
	81	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
	82	@echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group
	83	@echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group
	84	@echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group
	85	@echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group
	86	@echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group
	87	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
	88	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
	89	@echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group
	90	@echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group
	91	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
	92	@echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group
	93	@echo "video:x:12:" >> \$(MOUNT_PT)/etc/group
	94	@echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group
	95	@echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group
	96	@echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group
	97
	98	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
	99	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
[de22e80]	100	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
[535fd45]	101	chmod -R a+w \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
	102	chmod -R a+w \$(SRCSDIR)
[dbcdfd7]	103	@\$(call housekeeping)
[7432834]	104
	105	EOF
	106	) >> $MKFILE.tmp
[045b2dc]	107
[9ae0875]	108	host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
[7432834]	109	}
	110
	111
	112	#-----------------------------#
	113	cross_tools_Makefiles() { #
	114	#-----------------------------#
[045b2dc]	115	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[7432834]	116
	117	for file in cross-tools/* ; do
	118	# Keep the script file name
	119	this_script=`basename $file`
	120	#
	121	# Skip this script...
	122	case $this_script in
	123	cflags \| variables ) # work done in host_prep_Makefiles
[6ad5a2f]	124	continue ;;
[7432834]	125	*) ;;
	126	esac
[6ad5a2f]	127
[7432834]	128	#
	129	# Set the dependency for the first target.
[f3fcecc]	130	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
[7432834]	131
	132	# First append each name of the script files to a list (this will become
	133	# the names of the targets in the Makefile
	134	cross_tools="$cross_tools $this_script"
	135
	136	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	137	# and binutils in chapter 5)
	138	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	139	-e 's@-static@@' \
	140	-e 's@-final@@' \
	141	-e 's@-64@@' \
	142	-e 's@-n32@@'`
	143	case $name in
	144	glibc-headers) name="glibc" ;;
	145	esac
	146	pkg_tarball=$(get_package_tarball_name $name)
	147	#--------------------------------------------------------------------#
	148	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	149	#--------------------------------------------------------------------#
	150	#
	151	# Drop in the name of the target on a new line, and the previous target
	152	# as a dependency. Also call the echo_message function.
[045b2dc]	153	LUSER_wrt_target "${this_script}" "$PREV"
[7432834]	154	#
	155	# If $pkg_tarball isn't empty, we've got a package...
	156	if [ "$pkg_tarball" != "" ] ; then
[045b2dc]	157	LUSER_wrt_unpack "$pkg_tarball"
[7432834]	158	# If using optimizations, write the instructions
	159	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	160	fi
	161	#
[045b2dc]	162	LUSER_wrt_RunAsUser "${file}"
[7432834]	163	#
[045b2dc]	164	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[7432834]	165	#
	166	# Include a touch of the target name so make can check if it's already been made.
	167	wrt_touch
	168	#
	169	#--------------------------------------------------------------------#
	170	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	171	#--------------------------------------------------------------------#
	172	#
	173	# Keep the script file name for Makefile dependencies.
	174	PREV=$this_script
	175
	176	done # for file in ....
	177	}
	178
	179
	180
	181	#-----------------------------#
	182	final_system_Makefiles() { #
	183	#-----------------------------#
[045b2dc]	184	echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}"
[7432834]	185
[2dd88c4]	186	for file in final-system/* ; do
[7432834]	187	# Keep the script file name
	188	this_script=`basename $file`
	189
	190	# Test if the stripping phase must be skipped.
	191	# Skip alsp temp-perl for iterative runs
	192	case $this_script in
[401f81e]	193	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[7432834]	194	esac
	195
	196	# Grab the name of the target, strip id number, XXX-script
	197	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	198	-e 's@temp-@@' \
	199	-e 's@-64bit@@' \
	200	-e 's@-64@@' \
	201	-e 's@64@@' \
	202	-e 's@n32@@'`
	203
	204	# Find the version of the command files, if it corresponds with the building of
[2dd88c4]	205	# a specific package.
[7432834]	206	pkg_tarball=$(get_package_tarball_name $name)
	207
	208	# Append each name of the script files to a list (this will become
	209	# the names of the targets in the Makefile
[2dd88c4]	210	basicsystem="$basicsystem ${this_script}"
[7432834]	211
	212	#--------------------------------------------------------------------#
	213	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	214	#--------------------------------------------------------------------#
	215	#
	216	# Drop in the name of the target on a new line, and the previous target
	217	# as a dependency. Also call the echo_message function.
[045b2dc]	218	LUSER_wrt_target "${this_script}" "$PREV"
[7432834]	219	#
	220	# If $pkg_tarball isn't empty, we've got a package...
	221	if [ "$pkg_tarball" != "" ] ; then
[f546320]	222	# Touch timestamp file if installed files logs will be created.
	223	# But only for the firt build when running iterative builds.
	224	if [ "${INSTALL_LOG}" = "y" ] ; then
	225	LUSER_wrt_TouchTimestamp
	226	fi
[045b2dc]	227	LUSER_wrt_unpack "$pkg_tarball"
[7432834]	228	# If using optimizations, write the instructions
	229	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	230	fi
	231	#
[045b2dc]	232	LUSER_wrt_RunAsUser "${file}"
[7432834]	233	#
[f546320]	234	# Write installed files log and remove the build directory(ies)
	235	# except if the package build fails.
	236	if [ "$pkg_tarball" != "" ] ; then
	237	LUSER_RemoveBuildDirs "${name}"
	238	if [ "${INSTALL_LOG}" = "y" ] ; then
	239	LUSER_wrt_LogNewFiles "$name"
	240	fi
	241	fi
[7432834]	242	#
	243	# Include a touch of the target name so make can check if it's already been made.
	244	wrt_touch
	245	#
	246	#--------------------------------------------------------------------#
	247	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	248	#--------------------------------------------------------------------#
	249	#
	250	# Keep the script file name for Makefile dependencies.
[2dd88c4]	251	PREV=${this_script}
[7432834]	252	done # for file in final-system/* ...
	253	}
	254
	255
	256
	257	#-----------------------------#
	258	bootscripts_Makefiles() { #
	259	#-----------------------------#
[045b2dc]	260	echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}"
[7432834]	261
	262	for file in bootscripts/* ; do
	263	# Keep the script file name
	264	this_script=`basename $file`
	265
	266	case $this_script in
	267	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	268	console) continue ;; # Use the files that came with the bootscripts
[31e78bd]	269	network) continue ;; # Manually create these files
[7432834]	270	*) ;;
	271	esac
	272
	273	# First append each name of the script files to a list (this will become
	274	# the names of the targets in the Makefile
	275	bootscripttools="$bootscripttools $this_script"
	276
	277	# Grab the name of the target, strip id number, XXX-script
	278	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	279	-e 's@-64bit@@' \
	280	-e 's@-64@@' \
	281	-e 's@64@@' \
	282	-e 's@n32@@'`
	283	case $name in
	284	bootscripts) name=bootscripts-cross-lfs ;;
	285	*udev-rules) name=udev-cross-lfs ;;
	286	esac
	287
	288	pkg_tarball=$(get_package_tarball_name $name)
	289
	290	#--------------------------------------------------------------------#
	291	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	292	#--------------------------------------------------------------------#
	293	#
	294	# Drop in the name of the target on a new line, and the previous target
	295	# as a dependency. Also call the echo_message function.
[045b2dc]	296	LUSER_wrt_target "${this_script}" "$PREV"
[7432834]	297	#
	298	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	299	if [ "$pkg_tarball" != "" ] ; then
	300	LUSER_wrt_unpack "$pkg_tarball"
	301	if [ "${INSTALL_LOG}" = "y" ] ; then
	302	LUSER_wrt_TouchTimestamp
	303	fi
	304	fi
[7432834]	305	#
[045b2dc]	306	LUSER_wrt_RunAsUser "${file}"
[7432834]	307	#
[f546320]	308	if [ "$pkg_tarball" != "" ] ; then
	309	LUSER_RemoveBuildDirs "${name}"
	310	if [ "${INSTALL_LOG}" = "y" ] ; then
	311	LUSER_wrt_LogNewFiles "$name"
	312	fi
	313	fi
[7432834]	314	#
	315	# Include a touch of the target name so make can check if it's already been made.
	316	wrt_touch
	317	#
	318	#--------------------------------------------------------------------#
	319	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	320	#--------------------------------------------------------------------#
	321	#
	322	# Keep the script file name for Makefile dependencies.
	323	PREV=$this_script
	324
	325	done # for file in bootscripts/* ...
	326
	327	}
	328
	329
	330	#-----------------------------#
	331	bootable_Makefiles() { #
	332	#-----------------------------#
[045b2dc]	333	echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}"
[7432834]	334
	335	for file in bootable/* ; do
	336	# Keep the script file name
	337	this_script=`basename $file`
	338
	339	# A little housekeeping on the scripts
	340	case $this_script in
	341	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	342	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[7432834]	343	*kernel) # if there is no kernel config file do not build the kernel
	344	[[ -z $CONFIG ]] && continue
	345	# Copy the config file to /sources with a standardized name
	346	cp $CONFIG $BUILDDIR/sources/kernel-config
	347	;;
	348	esac
	349	#
	350	# First append each name of the script files to a list (this will become
	351	# the names of the targets in the Makefile
[045b2dc]	352	# NOTE: new makfile format forces the last script, *chowning, into a separate
	353	# phase.
	354	case ${this_script} in
[936efa8]	355	*chowning) chowning=" ${this_script}" ;;
[045b2dc]	356	*) bootable="$bootable $this_script" ;;
	357	esac
[7432834]	358	#
	359	# Grab the name of the target, strip id number and misc words.
	360	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	361	case $this_script in
	362	kernel) name=linux
	363	;;
	364	esac
	365
	366	pkg_tarball=$(get_package_tarball_name $name)
	367
	368	#--------------------------------------------------------------------#
	369	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	370	#--------------------------------------------------------------------#
	371	#
	372	# Drop in the name of the target on a new line, and the previous target
	373	# as a dependency. Also call the echo_message function.
[045b2dc]	374	LUSER_wrt_target "${this_script}" "$PREV"
[7432834]	375	#
	376	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	377	if [ "$pkg_tarball" != "" ] ; then
	378	LUSER_wrt_unpack "$pkg_tarball"
	379	if [ "${INSTALL_LOG}" = "y" ] ; then
	380	LUSER_wrt_TouchTimestamp
	381	fi
	382	fi
[7432834]	383	#
	384	# Select a script execution method
	385	case $this_script in
	386	fstab) if [[ -n "$FSTAB" ]]; then
[045b2dc]	387	LUSER_wrt_CopyFstab
[7432834]	388	else
[045b2dc]	389	LUSER_wrt_RunAsUser "${file}"
[7432834]	390	fi
	391	;;
[8f2c086]	392	*chowning) wrt_RunAsRoot "${file}"
[6ad5a2f]	393	;;
[045b2dc]	394	*) LUSER_wrt_RunAsUser "${file}"
[6ad5a2f]	395	;;
[7432834]	396	esac
	397	#
	398	# Housekeeping...remove any build directory(ies) except if the package build fails.
[f546320]	399	if [ "$pkg_tarball" != "" ] ; then
	400	LUSER_RemoveBuildDirs "${name}"
	401	if [ "${INSTALL_LOG}" = "y" ] ; then
	402	LUSER_wrt_LogNewFiles "$name"
	403	fi
	404	fi
[7432834]	405	#
	406	# Include a touch of the target name so make can check if it's already been made.
	407	wrt_touch
	408	#
	409	#--------------------------------------------------------------------#
	410	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	411	#--------------------------------------------------------------------#
	412	#
	413	# Keep the script file name for Makefile dependencies.
	414	PREV=$this_script
	415
	416	done
	417
	418	}
	419
	420
	421	#-----------------------------#
	422	build_Makefile() { # Construct a Makefile from the book scripts
	423	#-----------------------------#
	424	echo "Creating Makefile... ${BOLD}START${OFF}"
	425
	426	cd $JHALFSDIR/${PROGNAME}-commands
	427	# Start with a clean Makefile.tmp file
	428	>$MKFILE.tmp
	429
	430	host_prep_Makefiles
	431	cross_tools_Makefiles # $cross_tools
	432	final_system_Makefiles # $basicsystem
	433	bootscripts_Makefiles # $bootscripttools
	434	bootable_Makefiles # $bootable
[3e7ceed]	435	# Add the CUSTOM_TOOLS targets, if needed
	436	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
	437	# Add the BLFS_TOOL targets, if needed.
	438	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
[7432834]	439
	440	# Add a header, some variables and include the function file
	441	# to the top of the real Makefile.
[195ed9f]	442	wrt_Makefile_header
[7432834]	443
	444	# Drop in the main target 'all:' and the chapter targets with each sub-target
	445	# as a dependency.
	446	(
[045b2dc]	447	cat << EOF
	448
[3bc6078]	449	all: ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL mk_ROOT
[cd4466f]	450	@sudo make restore-luser-env
[045b2dc]	451	@sudo make do-housekeeping
[7432834]	452	@\$(call echo_finished,$VERSION)
	453
[045b2dc]	454	ck_UID:
	455	@if [ \`id -u\` = "0" ]; then \\
	456	echo "--------------------------------------------------"; \\
	457	echo "You cannot run this makefile from the root account"; \\
	458	echo "--------------------------------------------------"; \\
	459	exit 1; \\
	460	fi
[7432834]	461
[045b2dc]	462	mk_SETUP:
	463	@\$(call echo_SU_request)
[dbcdfd7]	464	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[045b2dc]	465	@touch \$@
[7432834]	466
[045b2dc]	467	mk_LUSER: mk_SETUP
	468	@\$(call echo_SULUSER_request)
[dbcdfd7]	469	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
[045b2dc]	470	@touch \$@
[7432834]	471
[3e7ceed]	472	mk_CUSTOM_TOOLS: create-sbu_du-report
[b4cf321]	473	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[3bc6078]	474	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	475	(sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
[dbcdfd7]	476	(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	477	fi;
	478	@touch \$@
	479
	480	mk_BLFS_TOOL: mk_CUSTOM_TOOLS
	481	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
[3bc6078]	482	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
[cd4466f]	483	(sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
[dbcdfd7]	484	(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) BLFS_TOOL"); \\
[cd4466f]	485	fi;
	486	@touch \$@
	487
[ddca240]	488	mk_ROOT: create-sbu_du-report
[3e7ceed]	489	@\$(call echo_SU_request)
[de22e80]	490	@echo "$VERSION-sysroot - jhalfs build" > clfs-release && \\
	491	sudo mv clfs-release \$(MOUNT_PT)/etc
[dbcdfd7]	492	@sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
[045b2dc]	493	@touch \$@
[7432834]	494
[3e7ceed]	495	SETUP: $host_prep
	496	LUSER: $cross_tools $basicsystem $bootscripttools $bootable
	497	CUSTOM_TOOLS: $custom_list
	498	BLFS_TOOL: $blfs_tool
	499	ROOT: $chowning
[7432834]	500
	501
[cd4466f]	502	create-sbu_du-report: mk_LUSER
[1838bc7]	503	@\$(call echo_message, Building)
	504	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
[c57747d]	505	./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
[1838bc7]	506	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	507	fi;
	508	@touch \$@
[7432834]	509
[6ad5a2f]	510	restore-luser-env:
[7432834]	511	@\$(call echo_message, Building)
[962793a]	512	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	513	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[7432834]	514	fi;
[962793a]	515	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	516	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[7432834]	517	fi;
[962793a]	518	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[7432834]	519	touch \$@ && \\
	520	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	521	echo --------------------------------------------------------------------------------\$(WHITE)
	522
	523	do-housekeeping:
[6ad5a2f]	524	@-if [ ! -f luser-exist ]; then \\
	525	userdel \$(LUSER); \\
[962793a]	526	rm -rf \$(LUSER_HOME); \\
[7432834]	527	fi;
	528
	529	EOF
	530	) >> $MKFILE
	531
	532	# Bring over the items from the Makefile.tmp
	533	cat $MKFILE.tmp >> $MKFILE
	534	rm $MKFILE.tmp
	535	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	536
	537	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: