Context Navigation

source: CLFS2/master.sh@ d6a3bad

experimental

Last change on this file since d6a3bad was 621f01f, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Fixed create-sbu_du-report target run (I think)
Property mode set to `100755`
File size: 18.8 KB

Rev	Line
[3b63c8c]	1	#!/bin/sh
	2	# $Id$
	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9	#----------------------------#
	10	host_prep_Makefiles() { # Initialization of the system
	11	#----------------------------#
	12	local CLFS_HOST
	13
[50fb011]	14	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[3b63c8c]	15
	16	# defined here, only for ease of reading
	17	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
	18	(
	19	cat << EOF
	20	023-creatingtoolsdir:
	21	@\$(call echo_message, Building)
	22	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	23	mkdir \$(MOUNT_PT)/sources; \\
	24	fi;
	25	@chmod a+wt \$(MOUNT_PT)/sources
	26	@touch \$@ && \\
	27	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	28	echo --------------------------------------------------------------------------------\$(WHITE)
	29
	30	025-addinguser: 023-creatingtoolsdir
	31	@\$(call echo_message, Building)
[9485eba]	32	@if [ ! -d /home/\$(LUSER) ]; then \\
	33	groupadd \$(LGROUP); \\
	34	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[3b63c8c]	35	else \\
[30737ea8]	36	touch luser-exist; \\
[3b63c8c]	37	fi;
[50fb011]	38	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
[9485eba]	39	chown \$(LUSER) \$(MOUNT_PT)/sources
[3b63c8c]	40	@touch \$@ && \\
	41	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	42	echo --------------------------------------------------------------------------------\$(WHITE)
	43
	44	026-settingenvironment: 025-addinguser
	45	@\$(call echo_message, Building)
[9485eba]	46	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	47	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[3b63c8c]	48	fi;
[9485eba]	49	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	50	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[3b63c8c]	51	fi;
[9485eba]	52	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	53	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	54	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	55	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	56	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	57	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	58	echo "" >> /home/\$(LUSER)/.bashrc && \\
	59	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	60	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	61	echo "" >> /home/\$(LUSER)/.bashrc && \\
	62	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	63	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	64	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	65	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	66	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[50fb011]	67	touch envars && \\
[7d4cc81]	68	chown \$(LUSER):\$(LGROUP) envars && \\
	69	chmod -R a+wt \$(MOUNT_PT)
[3b63c8c]	70	@touch \$@ && \\
	71	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	72	echo --------------------------------------------------------------------------------\$(WHITE)
	73
	74	027-create-directories: 026-settingenvironment
	75	@\$(call echo_message, Building)
	76
	77	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
	78	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
	79	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
	80	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
	81	@install -d -m 0750 \$(MOUNT_PT)/root
	82	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
	83	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
	84	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
	85	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
	86	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
	87	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
	88	ln -s share/{man,doc,info} \$\$dir ; \\
	89	done
	90
	91	@touch \$@ && \\
	92	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	93	echo --------------------------------------------------------------------------------\$(WHITE)
	94
	95	028-creating-sysfile: 027-create-directories
	96	@\$(call echo_message, Building)
	97
	98	@touch \$(MOUNT_PT)/etc/mtab
	99	@echo "root::0:0:root:/root:/bin/bash" >> \$(MOUNT_PT)/etc/passwd
	100	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
	101	@echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group
	102	@echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group
	103	@echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group
	104	@echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group
	105	@echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group
	106	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
	107	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
	108	@echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group
	109	@echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group
	110	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
	111	@echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group
	112	@echo "video:x:12:" >> \$(MOUNT_PT)/etc/group
	113	@echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group
	114	@echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group
	115	@echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group
	116
	117	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
	118	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
[9485eba]	119	@chown -R \$(LUSER) \$(MOUNT_PT)
[3b63c8c]	120
	121	@touch \$@ && \\
	122	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	123	echo --------------------------------------------------------------------------------\$(WHITE)
	124
	125	EOF
	126	) >> $MKFILE.tmp
[50fb011]	127
	128	host_prep=" 023-creatingtoolsdir 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
[3b63c8c]	129	}
	130
	131
	132	#-----------------------------#
	133	cross_tools_Makefiles() { #
	134	#-----------------------------#
[50fb011]	135	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[3b63c8c]	136
	137	for file in cross-tools/* ; do
	138	# Keep the script file name
	139	this_script=`basename $file`
	140	#
	141	# Skip this script...
[0e97a6a]	142	# NOTE.. the book indicated you only needed to install groff or file if the host
	143	# had older versions. The packages would be installed in the target directory
	144	# and not the host.
[3b63c8c]	145	case $this_script in
	146	cflags \| variables ) # work done in host_prep_Makefiles
[bd52fd3]	147	continue ;;
[0e97a6a]	148	*file ) FileVer=`file --version \| head -n1 \| cut -d " " -f1`
	149	[[ "$FileVer" = "file-4.17" ]] && continue
	150	;;
	151	*groff) GroffVer=`groff --version \| head -n1 \| cut -d " " -f4`
	152	[[ "$GroffVer" = "1.19.2" ]] && continue
	153	;;
[3b63c8c]	154	*) ;;
	155	esac
[03b3eba]	156
[3b63c8c]	157	#
	158	# Set the dependency for the first target.
[d39035c]	159	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
[3b63c8c]	160
	161	# First append each name of the script files to a list (this will become
	162	# the names of the targets in the Makefile
	163	cross_tools="$cross_tools $this_script"
	164
	165	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	166	# and binutils in chapter 5)
	167	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	168	-e 's@-static@@' \
	169	-e 's@-final@@' \
	170	-e 's@-64@@' \
	171	-e 's@-n32@@'`
	172	case $name in
	173	glibc-headers) name="glibc" ;;
	174	esac
	175	pkg_tarball=$(get_package_tarball_name $name)
	176	#--------------------------------------------------------------------#
	177	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	178	#--------------------------------------------------------------------#
	179	#
	180	# Drop in the name of the target on a new line, and the previous target
	181	# as a dependency. Also call the echo_message function.
[50fb011]	182	LUSER_wrt_target "${this_script}" "$PREV"
[3b63c8c]	183	#
	184	# If $pkg_tarball isn't empty, we've got a package...
	185	if [ "$pkg_tarball" != "" ] ; then
[50fb011]	186	LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	187	# If using optimizations, write the instructions
	188	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	189	fi
	190	#
[50fb011]	191	LUSER_wrt_RunAsUser "${file}"
[3b63c8c]	192	#
[50fb011]	193	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[3b63c8c]	194	#
	195	# Include a touch of the target name so make can check if it's already been made.
	196	wrt_touch
	197	#
	198	#--------------------------------------------------------------------#
	199	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	200	#--------------------------------------------------------------------#
	201	#
	202	# Keep the script file name for Makefile dependencies.
	203	PREV=$this_script
	204
	205	done # for file in ....
	206	}
	207
	208
	209
	210	#-----------------------------#
	211	final_system_Makefiles() { #
	212	#-----------------------------#
[50fb011]	213	echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}"
[f28e4bd]	214
	215	for file in final-system/* ; do
[3b63c8c]	216	# Keep the script file name
	217	this_script=`basename $file`
	218
	219	# Test if the stripping phase must be skipped.
	220	# Skip alsp temp-perl for iterative runs
	221	case $this_script in
[47fddc8]	222	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[3b63c8c]	223	esac
	224
	225	# Grab the name of the target, strip id number, XXX-script
	226	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	227	-e 's@temp-@@' \
	228	-e 's@-64bit@@' \
	229	-e 's@-64@@' \
	230	-e 's@64@@' \
	231	-e 's@n32@@'`
	232
	233	# Find the version of the command files, if it corresponds with the building of
[f28e4bd]	234	# a specific package.
[3b63c8c]	235	pkg_tarball=$(get_package_tarball_name $name)
	236
	237	# Append each name of the script files to a list (this will become
	238	# the names of the targets in the Makefile
[f28e4bd]	239	basicsystem="$basicsystem ${this_script}"
[3b63c8c]	240
	241	#--------------------------------------------------------------------#
	242	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	243	#--------------------------------------------------------------------#
	244	#
	245	# Drop in the name of the target on a new line, and the previous target
	246	# as a dependency. Also call the echo_message function.
[50fb011]	247	LUSER_wrt_target "${this_script}" "$PREV"
[3b63c8c]	248	#
	249	# If $pkg_tarball isn't empty, we've got a package...
	250	if [ "$pkg_tarball" != "" ] ; then
[50fb011]	251	LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	252	# If using optimizations, write the instructions
	253	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	254	fi
	255	#
[50fb011]	256	LUSER_wrt_RunAsUser "${file}"
[3b63c8c]	257	#
[50fb011]	258	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[3b63c8c]	259	#
	260	# Include a touch of the target name so make can check if it's already been made.
	261	wrt_touch
	262	#
	263	#--------------------------------------------------------------------#
	264	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	265	#--------------------------------------------------------------------#
	266	#
	267	# Keep the script file name for Makefile dependencies.
[f28e4bd]	268	PREV=${this_script}
[3b63c8c]	269	done # for file in final-system/* ...
	270	}
	271
	272
	273
	274	#-----------------------------#
	275	bootscripts_Makefiles() { #
	276	#-----------------------------#
[50fb011]	277	echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}"
[3b63c8c]	278
	279	for file in bootscripts/* ; do
	280	# Keep the script file name
	281	this_script=`basename $file`
	282
	283	case $this_script in
	284	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	285	console) continue ;; # Use the files that came with the bootscripts
[398a037]	286	network) continue ;; # Manually create these files
[3b63c8c]	287	*) ;;
	288	esac
	289
	290	# First append each name of the script files to a list (this will become
	291	# the names of the targets in the Makefile
	292	bootscripttools="$bootscripttools $this_script"
	293
	294	# Grab the name of the target, strip id number, XXX-script
	295	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	296	-e 's@-64bit@@' \
	297	-e 's@-64@@' \
	298	-e 's@64@@' \
	299	-e 's@n32@@'`
	300	case $name in
	301	bootscripts) name=bootscripts-cross-lfs ;;
	302	*udev-rules) name=udev-cross-lfs ;;
	303	esac
	304
	305	pkg_tarball=$(get_package_tarball_name $name)
	306
	307	#--------------------------------------------------------------------#
	308	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	309	#--------------------------------------------------------------------#
	310	#
	311	# Drop in the name of the target on a new line, and the previous target
	312	# as a dependency. Also call the echo_message function.
[50fb011]	313	LUSER_wrt_target "${this_script}" "$PREV"
[3b63c8c]	314	#
	315	# If $pkg_tarball isn't empty, we've got a package...
[50fb011]	316	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	317	#
[50fb011]	318	LUSER_wrt_RunAsUser "${file}"
[3b63c8c]	319	#
[50fb011]	320	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[3b63c8c]	321	#
	322	# Include a touch of the target name so make can check if it's already been made.
	323	wrt_touch
	324	#
	325	#--------------------------------------------------------------------#
	326	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	327	#--------------------------------------------------------------------#
	328	#
	329	# Keep the script file name for Makefile dependencies.
	330	PREV=$this_script
	331
	332	done # for file in bootscripts/* ...
	333
	334	}
	335
	336
	337	#-----------------------------#
	338	bootable_Makefiles() { #
	339	#-----------------------------#
[50fb011]	340	echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}"
[3b63c8c]	341
	342	for file in bootable/* ; do
	343	# Keep the script file name
	344	this_script=`basename $file`
	345
	346	# A little housekeeping on the scripts
	347	case $this_script in
	348	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[50fb011]	349	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[3b63c8c]	350	*kernel) # if there is no kernel config file do not build the kernel
	351	[[ -z $CONFIG ]] && continue
	352	# Copy the config file to /sources with a standardized name
	353	cp $CONFIG $BUILDDIR/sources/kernel-config
	354	;;
	355	esac
	356	#
	357	# First append each name of the script files to a list (this will become
	358	# the names of the targets in the Makefile
[50fb011]	359	# NOTE: new makfile format forces the last script, *chowning, into a separate
	360	# phase.
	361	case ${this_script} in
	362	*chowning) chowning=${this_script} ;;
[03b3eba]	363	*) bootable="$bootable $this_script" ;;
[50fb011]	364	esac
[3b63c8c]	365	#
	366	# Grab the name of the target, strip id number and misc words.
	367	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	368	case $this_script in
	369	kernel) name=linux
	370	;;
	371	esac
	372
	373	pkg_tarball=$(get_package_tarball_name $name)
	374
	375	#--------------------------------------------------------------------#
	376	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	377	#--------------------------------------------------------------------#
	378	#
	379	# Drop in the name of the target on a new line, and the previous target
	380	# as a dependency. Also call the echo_message function.
[50fb011]	381	LUSER_wrt_target "${this_script}" "$PREV"
[3b63c8c]	382	#
	383	# If $pkg_tarball isn't empty, we've got a package...
[50fb011]	384	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[3b63c8c]	385	#
	386	# Select a script execution method
	387	case $this_script in
	388	fstab) if [[ -n "$FSTAB" ]]; then
[50fb011]	389	LUSER_wrt_CopyFstab
[3b63c8c]	390	else
[50fb011]	391	LUSER_wrt_RunAsUser "${file}"
[3b63c8c]	392	fi
	393	;;
[f28e4bd]	394	*chowning) wrt_RunAsRoot "${this_script}" "${file}"
[9485eba]	395	;;
[50fb011]	396	*) LUSER_wrt_RunAsUser "${file}"
[3b63c8c]	397	;;
	398	esac
	399	#
	400	# Housekeeping...remove any build directory(ies) except if the package build fails.
[50fb011]	401	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[3b63c8c]	402	#
	403	# Include a touch of the target name so make can check if it's already been made.
	404	wrt_touch
	405	#
	406	#--------------------------------------------------------------------#
	407	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	408	#--------------------------------------------------------------------#
	409	#
	410	# Keep the script file name for Makefile dependencies.
	411	PREV=$this_script
	412
	413	done
	414
	415	}
	416
	417
	418	#-----------------------------#
	419	build_Makefile() { # Construct a Makefile from the book scripts
	420	#-----------------------------#
	421	echo "Creating Makefile... ${BOLD}START${OFF}"
	422
	423	cd $JHALFSDIR/${PROGNAME}-commands
	424	# Start with a clean Makefile.tmp file
	425	>$MKFILE.tmp
	426
	427	host_prep_Makefiles
	428	cross_tools_Makefiles # $cross_tools
	429	final_system_Makefiles # $basicsystem
	430	bootscripts_Makefiles # $bootscripttools
	431	bootable_Makefiles # $bootable
	432
	433	# Add a header, some variables and include the function file
	434	# to the top of the real Makefile.
	435	(
	436	cat << EOF
	437	$HEADER
	438
[398a037]	439	SRC = /sources
	440	MOUNT_PT = $BUILDDIR
	441	PKG_LST = $PKG_LST
	442	LUSER = $LUSER
	443	LGROUP = $LGROUP
	444	SCRIPT_ROOT = $SCRIPT_ROOT
	445
	446	BASEDIR = \$(MOUNT_PT)
	447	SRCSDIR = \$(BASEDIR)/sources
	448	CMDSDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/$PROGNAME-commands
	449	LOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/logs
	450	TESTLOGDIR = \$(BASEDIR)/\$(SCRIPT_ROOT)/test-logs
	451
	452	SU_LUSER = su - \$(LUSER) -c
	453	PRT_DU = echo -e "\nKB: \`du -skx --exclude=jhalfs \$(MOUNT_PT)\`\n"
	454	LUSER_HOME = /home/\$(LUSER)
[3b63c8c]	455
[80f0ea1]	456	export PATH := \${PATH}:/usr/sbin
	457
[3b63c8c]	458	include makefile-functions
	459
	460	EOF
	461	) > $MKFILE
	462
	463	# Drop in the main target 'all:' and the chapter targets with each sub-target
	464	# as a dependency.
	465	(
[50fb011]	466	cat << EOF
	467
[621f01f]	468	all: ck_UID mk_SETUP mk_LUSER mk_ROOT create-sbu_du-report
[df0277b]	469	@sudo make do-housekeeping
[3b63c8c]	470	@\$(call echo_finished,$VERSION)
	471
[7d4cc81]	472	ck_UID:
	473	@if [ \`id -u\` = "0" ]; then \\
	474	echo "--------------------------------------------------"; \\
	475	echo "You cannot run this makefile from the root account"; \\
	476	echo "--------------------------------------------------"; \\
	477	exit 1; \\
	478	fi
	479
[50fb011]	480	mk_SETUP:
	481	@\$(call echo_SU_request)
	482	@sudo make SETUP
	483	@touch \$@
[03b3eba]	484
[50fb011]	485	mk_LUSER: mk_SETUP
	486	@\$(call echo_SULUSER_request)
[7d4cc81]	487	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make LUSER" )
[df0277b]	488	@sudo make restore-luser-env
[50fb011]	489	@touch \$@
[3b63c8c]	490
[50fb011]	491	mk_ROOT:
	492	@sudo make ROOT
	493	@touch \$@
[3b63c8c]	494
[50fb011]	495	SETUP: $host_prep
[3b63c8c]	496
[50fb011]	497	LUSER: $cross_tools $basicsystem $bootscripttools $bootable
[3b63c8c]	498
[50fb011]	499	ROOT: $chowning
[3b63c8c]	500
	501
	502	restart:
[03b3eba]	503	@echo "This feature does not exist for the CLFS-2 makefile. (yet)"
[3b63c8c]	504
[30737ea8]	505	restore-luser-env:
[3b63c8c]	506	@\$(call echo_message, Building)
[9485eba]	507	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	508	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[3b63c8c]	509	fi;
[9485eba]	510	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	511	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[3b63c8c]	512	fi;
[9485eba]	513	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[3b63c8c]	514	touch \$@ && \\
	515	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	516	echo --------------------------------------------------------------------------------\$(WHITE)
	517
	518	do-housekeeping:
[30737ea8]	519	@-if [ ! -f luser-exist ]; then \\
[9485eba]	520	userdel \$(LUSER); \\
	521	rm -rf /home/\$(LUSER); \\
[3b63c8c]	522	fi;
	523
	524	EOF
	525	) >> $MKFILE
	526
[621f01f]	527	# Add SBU-disk_usage report target
	528	echo "create-sbu_du-report:" >> $MKFILE
	529	if [[ "$REPORT" = "y" ]] ; then
	530	(
	531	cat << EOF
	532	@\$(call echo_message, Building)
	533	@./create-sbu_du-report.sh logs $VERSION
	534	@\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report)
	535	@touch \$@
	536
	537
	538	EOF
	539	) >> $MKFILE
	540	else echo -e "\t@true\n\n" >> $MKFILE; fi
	541
[3b63c8c]	542	# Bring over the items from the Makefile.tmp
	543	cat $MKFILE.tmp >> $MKFILE
	544	rm $MKFILE.tmp
	545	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	546
	547	}
	548

Note: See TracBrowser for help on using the repository browser.

Download in other formats: