Context Navigation

source: CLFS3/master.sh@ 31eb678

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 31eb678 was f546320, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago
Ported INSTALL_LOG support to all books.
Property mode set to `100644`
File size: 20.0 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[837797e]	2	# $Id$
	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9	#----------------------------#
	10	host_prep_Makefiles() { # Initialization of the system
	11	#----------------------------#
	12	local CLFS_HOST
	13
	14	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
	15
	16	# defined here, only for ease of reading
	17	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
	18	(
	19	cat << EOF
	20
[9ae0875]	21	025-addinguser:
[837797e]	22	@\$(call echo_message, Building)
[962793a]	23	@if [ ! -d \$(LUSER_HOME) ]; then \\
[837797e]	24	groupadd \$(LGROUP); \\
	25	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
	26	else \\
	27	touch luser-exist; \\
	28	fi;
[dbcdfd7]	29	@\$(call housekeeping)
[837797e]	30
	31	026-settingenvironment: 025-addinguser
	32	@\$(call echo_message, Building)
[962793a]	33	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	34	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[837797e]	35	fi;
[962793a]	36	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	37	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[837797e]	38	fi;
[962793a]	39	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	40	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	41	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	42	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	43	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	44	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	45	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	46	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	47	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	48	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	49	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	50	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	51	echo "export CLFS_MIPS_LEVEL=\"${MIPS_LEVEL}\"" >> \$(LUSER_HOME)/.bashrc && \\
	52	echo "export BUILD=\"${ABI}\"" >> \$(LUSER_HOME)/.bashrc && \\
	53	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	54	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[837797e]	55	touch envars && \\
[9ae0875]	56	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	57	@\$(call housekeeping)
[837797e]	58
	59	027-create-directories: 026-settingenvironment
	60	@\$(call echo_message, Building)
	61
	62	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
	63	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
	64	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
	65	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
	66	@install -d -m 0750 \$(MOUNT_PT)/root
	67	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
	68	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
	69	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
	70	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
	71	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
	72	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
	73	ln -s share/{man,doc,info} \$\$dir ; \\
	74	done
[dbcdfd7]	75	@\$(call housekeeping)
[837797e]	76
	77	028-creating-sysfile: 027-create-directories
	78	@\$(call echo_message, Building)
	79
	80	@touch \$(MOUNT_PT)/etc/mtab
[8b23a0e]	81	@echo "root::0:0:root:/root:/bin/ash" >> \$(MOUNT_PT)/etc/passwd
[837797e]	82	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
	83	@echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group
	84	@echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group
	85	@echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group
	86	@echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group
	87	@echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group
	88	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
	89	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
	90	@echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group
	91	@echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group
	92	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
	93	@echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group
	94	@echo "video:x:12:" >> \$(MOUNT_PT)/etc/group
	95	@echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group
	96	@echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group
	97	@echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group
	98
	99	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
	100	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
[de22e80]	101	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
	102	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT)
[dbcdfd7]	103	@\$(call housekeeping)
[837797e]	104
	105	EOF
	106	) >> $MKFILE.tmp
	107
[9ae0875]	108	host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
[837797e]	109	}
	110
[9bbf240]	111	#-----------------------------#
	112	systemprep_Makefiles() { #
	113	#-----------------------------#
	114	echo "${tab_}${GREEN}Processing... ${L_arrow}system prep tools ( LUSER ) ${R_arrow}"
[81f7dc1]	115
	116	for file in systemprep/* ; do
[9bbf240]	117	# Keep the script file name
	118	this_script=`basename $file`
	119
	120	# Set the dependency for the first target.
	121	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
	122
	123	# First append each name of the script files to a list (this will become
	124	# the names of the targets in the Makefile)
	125	cross_tools="$cross_tools $this_script"
	126
	127	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	128	# and binutils in chapter 5)
	129	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	130
	131	pkg_tarball=$(get_package_tarball_name $name)
	132	#--------------------------------------------------------------------#
	133	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	134	#--------------------------------------------------------------------#
	135	#
	136	# Drop in the name of the target on a new line, and the previous target
	137	# as a dependency. Also call the echo_message function.
	138	LUSER_wrt_target "${this_script}" "$PREV"
	139	#
	140	# If $pkg_tarball isn't empty, we've got a package...
	141	if [ "$pkg_tarball" != "" ] ; then
	142	LUSER_wrt_unpack "$pkg_tarball"
	143	fi
	144	#
	145	LUSER_wrt_RunAsUser "${file}"
	146	#
	147	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
	148	#
	149	# Include a touch of the target name so make can check if it's already been made.
	150	wrt_touch
	151	#
	152	#--------------------------------------------------------------------#
	153	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	154	#--------------------------------------------------------------------#
	155	#
	156	# Keep the script file name for Makefile dependencies.
	157	PREV=$this_script
	158
	159	done # for file in ....
	160	}
	161
[837797e]	162
	163	#-----------------------------#
	164	cross_tools_Makefiles() { #
	165	#-----------------------------#
	166	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[81f7dc1]	167
	168	for file in cross-tools/* ; do
[837797e]	169	# Keep the script file name
	170	this_script=`basename $file`
	171	#
	172	# Skip this script...
	173	# NOTE.. the book indicated you only needed to install groff or file if the host
	174	# had older versions. The packages would be installed in the target directory
	175	# and not the host.
	176	case $this_script in
[2512414]	177	cflags \| variables \| abi \| toolchain*) # work done in host_prep_Makefiles
[837797e]	178	continue ;;
	179	*) ;;
	180	esac
	181
	182	#
	183	# Set the dependency for the first target.
	184	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
	185
	186	# First append each name of the script files to a list (this will become
	187	# the names of the targets in the Makefile)
	188	cross_tools="$cross_tools $this_script"
	189
	190	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	191	# and binutils in chapter 5)
	192	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	193	-e 's@-static@@' \
	194	-e 's@-final@@' \
	195	-e 's@-64@@' \
	196	-e 's@-n32@@'`
	197	case $name in
	198	uclibc*) name="uClibc" ;;
	199	esac
	200	pkg_tarball=$(get_package_tarball_name $name)
	201	#--------------------------------------------------------------------#
	202	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	203	#--------------------------------------------------------------------#
	204	#
	205	# Drop in the name of the target on a new line, and the previous target
	206	# as a dependency. Also call the echo_message function.
	207	LUSER_wrt_target "${this_script}" "$PREV"
	208	#
	209	# If $pkg_tarball isn't empty, we've got a package...
	210	if [ "$pkg_tarball" != "" ] ; then
	211	LUSER_wrt_unpack "$pkg_tarball"
	212	# If using optimizations, write the instructions
	213	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	214	fi
	215	#
	216	LUSER_wrt_RunAsUser "${file}"
	217	#
	218	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
	219	#
	220	# Include a touch of the target name so make can check if it's already been made.
	221	wrt_touch
	222	#
	223	#--------------------------------------------------------------------#
	224	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	225	#--------------------------------------------------------------------#
	226	#
	227	# Keep the script file name for Makefile dependencies.
	228	PREV=$this_script
	229
	230	done # for file in ....
	231	}
	232
	233
	234
	235	#-----------------------------#
	236	final_system_Makefiles() { #
	237	#-----------------------------#
	238	echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}"
	239
	240	for file in final-system/* ; do
	241	# Keep the script file name
	242	this_script=`basename $file`
	243
	244	# Grab the name of the target, strip id number, XXX-script
	245	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	246	-e 's@temp-@@' \
	247	-e 's@-64bit@@' \
	248	-e 's@-64@@' \
	249	-e 's@64@@' \
	250	-e 's@n32@@'`
	251
	252	# Find the version of the command files, if it corresponds with the building of
	253	# a specific package.
	254	pkg_tarball=$(get_package_tarball_name $name)
	255
	256	# Append each name of the script files to a list (this will become
	257	# the names of the targets in the Makefile
	258	basicsystem="$basicsystem ${this_script}"
	259
	260	#--------------------------------------------------------------------#
	261	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	262	#--------------------------------------------------------------------#
	263	#
	264	# Drop in the name of the target on a new line, and the previous target
	265	# as a dependency. Also call the echo_message function.
	266	LUSER_wrt_target "${this_script}" "$PREV"
	267	#
	268	# If $pkg_tarball isn't empty, we've got a package...
	269	if [ "$pkg_tarball" != "" ] ; then
[f546320]	270	# Touch timestamp file if installed files logs will be created.
	271	# But only for the firt build when running iterative builds.
	272	if [ "${INSTALL_LOG}" = "y" ] ; then
	273	LUSER_wrt_TouchTimestamp
	274	fi
[837797e]	275	LUSER_wrt_unpack "$pkg_tarball"
	276	# If using optimizations, write the instructions
	277	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	278	fi
	279	#
	280	LUSER_wrt_RunAsUser "${file}"
	281	#
[f546320]	282	# Write installed files log and remove the build directory(ies)
	283	# except if the package build fails.
	284	if [ "$pkg_tarball" != "" ] ; then
	285	LUSER_RemoveBuildDirs "${name}"
	286	if [ "${INSTALL_LOG}" = "y" ] ; then
	287	LUSER_wrt_LogNewFiles "$name"
	288	fi
	289	fi
[837797e]	290	#
	291	# Include a touch of the target name so make can check if it's already been made.
	292	wrt_touch
	293	#
	294	#--------------------------------------------------------------------#
	295	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	296	#--------------------------------------------------------------------#
	297	#
	298	# Keep the script file name for Makefile dependencies.
	299	PREV=${this_script}
	300	done # for file in final-system/* ...
	301	}
	302
	303
	304
	305	#-----------------------------#
	306	bootscripts_Makefiles() { #
	307	#-----------------------------#
	308	echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}"
	309
	310	for file in bootscripts/* ; do
	311	# Keep the script file name
	312	this_script=`basename $file`
	313
	314	case $this_script in
	315	console) continue ;; # Use the files that came with the bootscripts
	316	network) continue ;; # Manually create these files
	317	*) ;;
	318	esac
	319
	320	# First append each name of the script files to a list (this will become
	321	# the names of the targets in the Makefile
	322	bootscripttools="$bootscripttools $this_script"
	323
	324	# Grab the name of the target, strip id number, XXX-script
	325	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	326	-e 's@-64bit@@' \
	327	-e 's@-64@@' \
	328	-e 's@64@@' \
	329	-e 's@n32@@'`
	330	case $name in
[3c38ab0]	331	bootscripts) name=clfs-embedded-bootscripts ;;
[837797e]	332	esac
	333
	334	pkg_tarball=$(get_package_tarball_name $name)
	335
	336	#--------------------------------------------------------------------#
	337	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	338	#--------------------------------------------------------------------#
	339	#
	340	# Drop in the name of the target on a new line, and the previous target
	341	# as a dependency. Also call the echo_message function.
	342	LUSER_wrt_target "${this_script}" "$PREV"
	343	#
	344	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	345	if [ "$pkg_tarball" != "" ] ; then
	346	LUSER_wrt_unpack "$pkg_tarball"
	347	if [ "${INSTALL_LOG}" = "y" ] ; then
	348	LUSER_wrt_TouchTimestamp
	349	fi
	350	fi
[837797e]	351	#
	352	LUSER_wrt_RunAsUser "${file}"
	353	#
[f546320]	354	if [ "$pkg_tarball" != "" ] ; then
	355	LUSER_RemoveBuildDirs "${name}"
	356	if [ "${INSTALL_LOG}" = "y" ] ; then
	357	LUSER_wrt_LogNewFiles "$name"
	358	fi
	359	fi
[837797e]	360	#
	361	# Include a touch of the target name so make can check if it's already been made.
	362	wrt_touch
	363	#
	364	#--------------------------------------------------------------------#
	365	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	366	#--------------------------------------------------------------------#
	367	#
	368	# Keep the script file name for Makefile dependencies.
	369	PREV=$this_script
	370
	371	done # for file in bootscripts/* ...
	372
	373	}
	374
	375
	376	#-----------------------------#
	377	bootable_Makefiles() { #
	378	#-----------------------------#
	379	echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}"
	380
	381	for file in bootable/* ; do
	382	# Keep the script file name
	383	this_script=`basename $file`
	384
	385	# A little housekeeping on the scripts
	386	case $this_script in
	387	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
	388	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	389	*kernel) # if there is no kernel config file do not build the kernel
	390	[[ -z $CONFIG ]] && continue
	391	# Copy the config file to /sources with a standardized name
	392	cp $CONFIG $BUILDDIR/sources/kernel-config
	393	;;
	394	esac
	395	#
	396	# First append each name of the script files to a list (this will become
	397	# the names of the targets in the Makefile
	398	# NOTE: new makfile format forces the last script, *chowning, into a separate
	399	# phase.
	400	case ${this_script} in
	401	*chowning) chowning=${this_script} ;;
	402	*) bootable="$bootable $this_script" ;;
	403	esac
	404	#
	405	# Grab the name of the target, strip id number and misc words.
	406	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	407	case $this_script in
	408	kernel) name=linux
	409	;;
	410	esac
	411
	412	pkg_tarball=$(get_package_tarball_name $name)
	413
	414	#--------------------------------------------------------------------#
	415	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	416	#--------------------------------------------------------------------#
	417	#
	418	# Drop in the name of the target on a new line, and the previous target
	419	# as a dependency. Also call the echo_message function.
	420	LUSER_wrt_target "${this_script}" "$PREV"
	421	#
	422	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	423	if [ "$pkg_tarball" != "" ] ; then
	424	LUSER_wrt_unpack "$pkg_tarball"
	425	if [ "${INSTALL_LOG}" = "y" ] ; then
	426	LUSER_wrt_TouchTimestamp
	427	fi
	428	fi
[837797e]	429	#
	430	# Select a script execution method
	431	case $this_script in
	432	fstab) if [[ -n "$FSTAB" ]]; then
	433	LUSER_wrt_CopyFstab
	434	else
	435	LUSER_wrt_RunAsUser "${file}"
	436	fi
	437	;;
[8f2c086]	438	*chowning) wrt_RunAsRoot "${file}"
[837797e]	439	;;
	440	*) LUSER_wrt_RunAsUser "${file}"
	441	;;
	442	esac
	443	#
	444	# Housekeeping...remove any build directory(ies) except if the package build fails.
[f546320]	445	if [ "$pkg_tarball" != "" ] ; then
	446	LUSER_RemoveBuildDirs "${name}"
	447	if [ "${INSTALL_LOG}" = "y" ] ; then
	448	LUSER_wrt_LogNewFiles "$name"
	449	fi
	450	fi
[837797e]	451	#
	452	# Include a touch of the target name so make can check if it's already been made.
	453	wrt_touch
	454	#
	455	#--------------------------------------------------------------------#
	456	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	457	#--------------------------------------------------------------------#
	458	#
	459	# Keep the script file name for Makefile dependencies.
	460	PREV=$this_script
	461
	462	done
	463
	464	}
	465
	466
	467	#-----------------------------#
	468	build_Makefile() { # Construct a Makefile from the book scripts
	469	#-----------------------------#
	470	echo "Creating Makefile... ${BOLD}START${OFF}"
	471
	472	cd $JHALFSDIR/${PROGNAME}-commands
	473	# Start with a clean Makefile.tmp file
	474	>$MKFILE.tmp
	475
	476	host_prep_Makefiles
[9bbf240]	477	[[ "${PLATFORM% -*}" = "WRT" ]] && systemprep_Makefiles # $cross_tools
[837797e]	478	cross_tools_Makefiles # $cross_tools
	479	final_system_Makefiles # $basicsystem
	480	bootscripts_Makefiles # $bootscripttools
	481	bootable_Makefiles # $bootable
[3e7ceed]	482	# Add the CUSTOM_TOOLS targets, if needed
	483	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[837797e]	484
	485	# Add a header, some variables and include the function file
	486	# to the top of the real Makefile.
[195ed9f]	487	wrt_Makefile_header
[837797e]	488
	489	# Drop in the main target 'all:' and the chapter targets with each sub-target
	490	# as a dependency.
	491	(
	492	cat << EOF
	493
[4fef116]	494	all: ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_ROOT
[5cbb44c]	495	@sudo make restore-luser-env
[837797e]	496	@sudo make do-housekeeping
	497	@\$(call echo_finished,$VERSION)
	498
	499	ck_UID:
	500	@if [ \`id -u\` = "0" ]; then \\
	501	echo "--------------------------------------------------"; \\
	502	echo "You cannot run this makefile from the root account"; \\
	503	echo "--------------------------------------------------"; \\
	504	exit 1; \\
	505	fi
	506
	507	mk_SETUP:
	508	@\$(call echo_SU_request)
[dbcdfd7]	509	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[837797e]	510	@touch \$@
	511
	512	mk_LUSER: mk_SETUP
	513	@\$(call echo_SULUSER_request)
[dbcdfd7]	514	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
[837797e]	515	@touch \$@
	516
[3e7ceed]	517	mk_CUSTOM_TOOLS: create-sbu_du-report
[b4cf321]	518	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[3bc6078]	519	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	520	(sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
[dbcdfd7]	521	(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	522	fi;
	523	@touch \$@
	524
[b230bd6]	525	mk_ROOT:
[3e7ceed]	526	@\$(call echo_SU_request)
[de22e80]	527	@echo "$VERSION-embedded - jhalfs build" > clfs-release && \\
	528	sudo mv clfs-release \$(MOUNT_PT)/etc
[dbcdfd7]	529	@sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
[837797e]	530	@touch \$@
	531
	532
[3e7ceed]	533	SETUP: $host_prep
	534	LUSER: $cross_tools $basicsystem $bootscripttools $bootable
	535	CUSTOM_TOOLS: $custom_list
	536	ROOT: $chowning
[837797e]	537
	538
[5cbb44c]	539	create-sbu_du-report: mk_LUSER
[1838bc7]	540	@\$(call echo_message, Building)
	541	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	542	./create-sbu_du-report.sh logs $VERSION; \\
	543	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	544	fi;
	545	@touch \$@
	546
[837797e]	547	restore-luser-env:
	548	@\$(call echo_message, Building)
[962793a]	549	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	550	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[837797e]	551	fi;
[962793a]	552	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	553	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[837797e]	554	fi;
[962793a]	555	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[837797e]	556	touch \$@ && \\
	557	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	558	echo --------------------------------------------------------------------------------\$(WHITE)
	559
	560	do-housekeeping:
	561	@-if [ ! -f luser-exist ]; then \\
	562	userdel \$(LUSER); \\
[962793a]	563	rm -rf \$(LUSER_HOME); \\
[837797e]	564	fi;
	565
	566	EOF
	567	) >> $MKFILE
	568
	569	# Bring over the items from the Makefile.tmp
	570	cat $MKFILE.tmp >> $MKFILE
	571	rm $MKFILE.tmp
	572	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	573
	574	}
	575

Note: See TracBrowser for help on using the repository browser.

Download in other formats: