Context Navigation

source: CLFS3/master.sh@ f1edc8e

ablfs-more legacy trunk

Last change on this file since f1edc8e was c57747d, checked in by Pierre Labastie <pierre@…>, 7 years ago
Make the date of the SBU_DU file the same as the one reported at the end of the jhalfs run. Note that date is the one when the run is started
Property mode set to `100644`
File size: 20.4 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[837797e]	2	# $Id$
	3
	4	###################################
	5	### FUNCTIONS ###
	6	###################################
	7
	8
	9	#----------------------------#
	10	host_prep_Makefiles() { # Initialization of the system
	11	#----------------------------#
	12	local CLFS_HOST
	13
	14	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
	15
	16	# defined here, only for ease of reading
	17	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
	18	(
	19	cat << EOF
	20
[9ae0875]	21	025-addinguser:
[837797e]	22	@\$(call echo_message, Building)
[962793a]	23	@if [ ! -d \$(LUSER_HOME) ]; then \\
[837797e]	24	groupadd \$(LGROUP); \\
	25	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
	26	else \\
	27	touch luser-exist; \\
	28	fi;
[dbcdfd7]	29	@\$(call housekeeping)
[837797e]	30
	31	026-settingenvironment: 025-addinguser
	32	@\$(call echo_message, Building)
[962793a]	33	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	34	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
[837797e]	35	fi;
[962793a]	36	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	37	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
[837797e]	38	fi;
[962793a]	39	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
	40	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
	41	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
	42	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
	43	echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
	44	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
	45	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	46	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
	47	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
[5f154f1]	48	echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
[962793a]	49	echo "" >> \$(LUSER_HOME)/.bashrc && \\
	50	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
	51	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
	52	echo "export CLFS_MIPS_LEVEL=\"${MIPS_LEVEL}\"" >> \$(LUSER_HOME)/.bashrc && \\
	53	echo "export BUILD=\"${ABI}\"" >> \$(LUSER_HOME)/.bashrc && \\
	54	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
	55	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
[837797e]	56	touch envars && \\
[9ae0875]	57	chown \$(LUSER):\$(LGROUP) envars
[dbcdfd7]	58	@\$(call housekeeping)
[837797e]	59
	60	027-create-directories: 026-settingenvironment
	61	@\$(call echo_message, Building)
	62
	63	@mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
	64	@mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
	65	@mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
	66	@mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
	67	@install -d -m 0750 \$(MOUNT_PT)/root
	68	@install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
	69	@mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
	70	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
	71	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
	72	@mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
	73	@for dir in \$(MOUNT_PT)/usr{,/local}; do \\
	74	ln -s share/{man,doc,info} \$\$dir ; \\
	75	done
[dbcdfd7]	76	@\$(call housekeeping)
[837797e]	77
	78	028-creating-sysfile: 027-create-directories
	79	@\$(call echo_message, Building)
	80
	81	@touch \$(MOUNT_PT)/etc/mtab
[8b23a0e]	82	@echo "root::0:0:root:/root:/bin/ash" >> \$(MOUNT_PT)/etc/passwd
[837797e]	83	@echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
	84	@echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group
	85	@echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group
	86	@echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group
	87	@echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group
	88	@echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group
	89	@echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
	90	@echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
	91	@echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group
	92	@echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group
	93	@echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
	94	@echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group
	95	@echo "video:x:12:" >> \$(MOUNT_PT)/etc/group
	96	@echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group
	97	@echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group
	98	@echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group
	99
	100	@touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
	101	@chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
[de22e80]	102	@chown -R \$(LUSER) \$(MOUNT_PT) && \\
[535fd45]	103	chmod -R a+w \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
	104	chmod -R a+w \$(SRCSDIR)
[dbcdfd7]	105	@\$(call housekeeping)
[837797e]	106
	107	EOF
	108	) >> $MKFILE.tmp
	109
[9ae0875]	110	host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
[837797e]	111	}
	112
[9bbf240]	113	#-----------------------------#
	114	systemprep_Makefiles() { #
	115	#-----------------------------#
	116	echo "${tab_}${GREEN}Processing... ${L_arrow}system prep tools ( LUSER ) ${R_arrow}"
[81f7dc1]	117
	118	for file in systemprep/* ; do
[9bbf240]	119	# Keep the script file name
	120	this_script=`basename $file`
	121
	122	# Set the dependency for the first target.
	123	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
	124
	125	# First append each name of the script files to a list (this will become
	126	# the names of the targets in the Makefile)
	127	cross_tools="$cross_tools $this_script"
	128
	129	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	130	# and binutils in chapter 5)
	131	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	132
	133	pkg_tarball=$(get_package_tarball_name $name)
	134	#--------------------------------------------------------------------#
	135	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	136	#--------------------------------------------------------------------#
	137	#
	138	# Drop in the name of the target on a new line, and the previous target
	139	# as a dependency. Also call the echo_message function.
	140	LUSER_wrt_target "${this_script}" "$PREV"
	141	#
	142	# If $pkg_tarball isn't empty, we've got a package...
	143	if [ "$pkg_tarball" != "" ] ; then
	144	LUSER_wrt_unpack "$pkg_tarball"
	145	fi
	146	#
	147	LUSER_wrt_RunAsUser "${file}"
	148	#
	149	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
	150	#
	151	# Include a touch of the target name so make can check if it's already been made.
	152	wrt_touch
	153	#
	154	#--------------------------------------------------------------------#
	155	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	156	#--------------------------------------------------------------------#
	157	#
	158	# Keep the script file name for Makefile dependencies.
	159	PREV=$this_script
	160
	161	done # for file in ....
	162	}
	163
[837797e]	164
	165	#-----------------------------#
	166	cross_tools_Makefiles() { #
	167	#-----------------------------#
	168	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[81f7dc1]	169
	170	for file in cross-tools/* ; do
[837797e]	171	# Keep the script file name
	172	this_script=`basename $file`
	173	#
	174	# Skip this script...
	175	# NOTE.. the book indicated you only needed to install groff or file if the host
	176	# had older versions. The packages would be installed in the target directory
	177	# and not the host.
	178	case $this_script in
[2512414]	179	cflags \| variables \| abi \| toolchain*) # work done in host_prep_Makefiles
[837797e]	180	continue ;;
	181	*) ;;
	182	esac
	183
	184	#
	185	# Set the dependency for the first target.
	186	if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
	187
	188	# First append each name of the script files to a list (this will become
	189	# the names of the targets in the Makefile)
	190	cross_tools="$cross_tools $this_script"
	191
	192	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	193	# and binutils in chapter 5)
	194	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	195	-e 's@-static@@' \
	196	-e 's@-final@@' \
	197	-e 's@-64@@' \
	198	-e 's@-n32@@'`
	199	case $name in
	200	uclibc*) name="uClibc" ;;
	201	esac
	202	pkg_tarball=$(get_package_tarball_name $name)
	203	#--------------------------------------------------------------------#
	204	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	205	#--------------------------------------------------------------------#
	206	#
	207	# Drop in the name of the target on a new line, and the previous target
	208	# as a dependency. Also call the echo_message function.
	209	LUSER_wrt_target "${this_script}" "$PREV"
	210	#
	211	# If $pkg_tarball isn't empty, we've got a package...
	212	if [ "$pkg_tarball" != "" ] ; then
	213	LUSER_wrt_unpack "$pkg_tarball"
[6100211]	214	# Touch timestamp file if installed files logs will be created.
	215	if [ "${INSTALL_LOG}" = "y" ] ; then
	216	LUSER_wrt_TouchTimestamp
	217	fi
[837797e]	218	# If using optimizations, write the instructions
	219	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	220	fi
	221	#
	222	LUSER_wrt_RunAsUser "${file}"
	223	#
[6100211]	224	# Write installed files log and remove the build directory(ies)
	225	# except if the package build fails.
	226	if [ "$pkg_tarball" != "" ] ; then
	227	LUSER_RemoveBuildDirs "${name}"
	228	if [ "${INSTALL_LOG}" = "y" ] ; then
	229	LUSER_wrt_LogNewFiles "$name"
	230	fi
	231	fi
[837797e]	232	#
	233	# Include a touch of the target name so make can check if it's already been made.
	234	wrt_touch
	235	#
	236	#--------------------------------------------------------------------#
	237	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	238	#--------------------------------------------------------------------#
	239	#
	240	# Keep the script file name for Makefile dependencies.
	241	PREV=$this_script
	242
	243	done # for file in ....
	244	}
	245
	246
	247
	248	#-----------------------------#
	249	final_system_Makefiles() { #
	250	#-----------------------------#
	251	echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}"
	252
	253	for file in final-system/* ; do
	254	# Keep the script file name
	255	this_script=`basename $file`
	256
	257	# Grab the name of the target, strip id number, XXX-script
	258	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	259	-e 's@temp-@@' \
	260	-e 's@-64bit@@' \
	261	-e 's@-64@@' \
	262	-e 's@64@@' \
	263	-e 's@n32@@'`
	264
	265	# Find the version of the command files, if it corresponds with the building of
	266	# a specific package.
	267	pkg_tarball=$(get_package_tarball_name $name)
	268
	269	# Append each name of the script files to a list (this will become
	270	# the names of the targets in the Makefile
	271	basicsystem="$basicsystem ${this_script}"
	272
	273	#--------------------------------------------------------------------#
	274	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	275	#--------------------------------------------------------------------#
	276	#
	277	# Drop in the name of the target on a new line, and the previous target
	278	# as a dependency. Also call the echo_message function.
	279	LUSER_wrt_target "${this_script}" "$PREV"
	280	#
	281	# If $pkg_tarball isn't empty, we've got a package...
	282	if [ "$pkg_tarball" != "" ] ; then
[f546320]	283	# Touch timestamp file if installed files logs will be created.
	284	if [ "${INSTALL_LOG}" = "y" ] ; then
	285	LUSER_wrt_TouchTimestamp
	286	fi
[837797e]	287	LUSER_wrt_unpack "$pkg_tarball"
	288	# If using optimizations, write the instructions
	289	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	290	fi
	291	#
	292	LUSER_wrt_RunAsUser "${file}"
	293	#
[f546320]	294	# Write installed files log and remove the build directory(ies)
	295	# except if the package build fails.
	296	if [ "$pkg_tarball" != "" ] ; then
	297	LUSER_RemoveBuildDirs "${name}"
	298	if [ "${INSTALL_LOG}" = "y" ] ; then
	299	LUSER_wrt_LogNewFiles "$name"
	300	fi
	301	fi
[837797e]	302	#
	303	# Include a touch of the target name so make can check if it's already been made.
	304	wrt_touch
	305	#
	306	#--------------------------------------------------------------------#
	307	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	308	#--------------------------------------------------------------------#
	309	#
	310	# Keep the script file name for Makefile dependencies.
	311	PREV=${this_script}
	312	done # for file in final-system/* ...
	313	}
	314
	315
	316
	317	#-----------------------------#
	318	bootscripts_Makefiles() { #
	319	#-----------------------------#
	320	echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}"
	321
	322	for file in bootscripts/* ; do
	323	# Keep the script file name
	324	this_script=`basename $file`
	325
	326	case $this_script in
	327	console) continue ;; # Use the files that came with the bootscripts
	328	network) continue ;; # Manually create these files
	329	*) ;;
	330	esac
	331
	332	# First append each name of the script files to a list (this will become
	333	# the names of the targets in the Makefile
	334	bootscripttools="$bootscripttools $this_script"
	335
	336	# Grab the name of the target, strip id number, XXX-script
	337	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	338	-e 's@-64bit@@' \
	339	-e 's@-64@@' \
	340	-e 's@64@@' \
	341	-e 's@n32@@'`
	342	case $name in
[3c38ab0]	343	bootscripts) name=clfs-embedded-bootscripts ;;
[837797e]	344	esac
	345
	346	pkg_tarball=$(get_package_tarball_name $name)
	347
	348	#--------------------------------------------------------------------#
	349	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	350	#--------------------------------------------------------------------#
	351	#
	352	# Drop in the name of the target on a new line, and the previous target
	353	# as a dependency. Also call the echo_message function.
	354	LUSER_wrt_target "${this_script}" "$PREV"
	355	#
	356	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	357	if [ "$pkg_tarball" != "" ] ; then
	358	LUSER_wrt_unpack "$pkg_tarball"
	359	if [ "${INSTALL_LOG}" = "y" ] ; then
	360	LUSER_wrt_TouchTimestamp
	361	fi
	362	fi
[837797e]	363	#
	364	LUSER_wrt_RunAsUser "${file}"
	365	#
[f546320]	366	if [ "$pkg_tarball" != "" ] ; then
	367	LUSER_RemoveBuildDirs "${name}"
	368	if [ "${INSTALL_LOG}" = "y" ] ; then
	369	LUSER_wrt_LogNewFiles "$name"
	370	fi
	371	fi
[837797e]	372	#
	373	# Include a touch of the target name so make can check if it's already been made.
	374	wrt_touch
	375	#
	376	#--------------------------------------------------------------------#
	377	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	378	#--------------------------------------------------------------------#
	379	#
	380	# Keep the script file name for Makefile dependencies.
	381	PREV=$this_script
	382
	383	done # for file in bootscripts/* ...
	384
	385	}
	386
	387
	388	#-----------------------------#
	389	bootable_Makefiles() { #
	390	#-----------------------------#
	391	echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}"
	392
	393	for file in bootable/* ; do
	394	# Keep the script file name
	395	this_script=`basename $file`
	396
	397	# A little housekeeping on the scripts
	398	case $this_script in
	399	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
	400	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	401	*kernel) # if there is no kernel config file do not build the kernel
	402	[[ -z $CONFIG ]] && continue
	403	# Copy the config file to /sources with a standardized name
	404	cp $CONFIG $BUILDDIR/sources/kernel-config
	405	;;
	406	esac
	407	#
	408	# First append each name of the script files to a list (this will become
	409	# the names of the targets in the Makefile
	410	# NOTE: new makfile format forces the last script, *chowning, into a separate
	411	# phase.
	412	case ${this_script} in
	413	*chowning) chowning=${this_script} ;;
	414	*) bootable="$bootable $this_script" ;;
	415	esac
	416	#
	417	# Grab the name of the target, strip id number and misc words.
	418	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	419	case $this_script in
	420	kernel) name=linux
	421	;;
	422	esac
	423
	424	pkg_tarball=$(get_package_tarball_name $name)
	425
	426	#--------------------------------------------------------------------#
	427	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	428	#--------------------------------------------------------------------#
	429	#
	430	# Drop in the name of the target on a new line, and the previous target
	431	# as a dependency. Also call the echo_message function.
	432	LUSER_wrt_target "${this_script}" "$PREV"
	433	#
	434	# If $pkg_tarball isn't empty, we've got a package...
[f546320]	435	if [ "$pkg_tarball" != "" ] ; then
	436	LUSER_wrt_unpack "$pkg_tarball"
	437	if [ "${INSTALL_LOG}" = "y" ] ; then
	438	LUSER_wrt_TouchTimestamp
	439	fi
	440	fi
[837797e]	441	#
	442	# Select a script execution method
	443	case $this_script in
	444	fstab) if [[ -n "$FSTAB" ]]; then
	445	LUSER_wrt_CopyFstab
	446	else
	447	LUSER_wrt_RunAsUser "${file}"
	448	fi
	449	;;
[8f2c086]	450	*chowning) wrt_RunAsRoot "${file}"
[837797e]	451	;;
	452	*) LUSER_wrt_RunAsUser "${file}"
	453	;;
	454	esac
	455	#
	456	# Housekeeping...remove any build directory(ies) except if the package build fails.
[f546320]	457	if [ "$pkg_tarball" != "" ] ; then
	458	LUSER_RemoveBuildDirs "${name}"
	459	if [ "${INSTALL_LOG}" = "y" ] ; then
	460	LUSER_wrt_LogNewFiles "$name"
	461	fi
	462	fi
[837797e]	463	#
	464	# Include a touch of the target name so make can check if it's already been made.
	465	wrt_touch
	466	#
	467	#--------------------------------------------------------------------#
	468	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	469	#--------------------------------------------------------------------#
	470	#
	471	# Keep the script file name for Makefile dependencies.
	472	PREV=$this_script
	473
	474	done
	475
	476	}
	477
	478
	479	#-----------------------------#
	480	build_Makefile() { # Construct a Makefile from the book scripts
	481	#-----------------------------#
	482	echo "Creating Makefile... ${BOLD}START${OFF}"
	483
	484	cd $JHALFSDIR/${PROGNAME}-commands
	485	# Start with a clean Makefile.tmp file
	486	>$MKFILE.tmp
	487
	488	host_prep_Makefiles
[9bbf240]	489	[[ "${PLATFORM% -*}" = "WRT" ]] && systemprep_Makefiles # $cross_tools
[837797e]	490	cross_tools_Makefiles # $cross_tools
	491	final_system_Makefiles # $basicsystem
	492	bootscripts_Makefiles # $bootscripttools
	493	bootable_Makefiles # $bootable
[3e7ceed]	494	# Add the CUSTOM_TOOLS targets, if needed
	495	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
[837797e]	496
	497	# Add a header, some variables and include the function file
	498	# to the top of the real Makefile.
[195ed9f]	499	wrt_Makefile_header
[837797e]	500
	501	# Drop in the main target 'all:' and the chapter targets with each sub-target
	502	# as a dependency.
	503	(
	504	cat << EOF
	505
[4fef116]	506	all: ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_ROOT
[5cbb44c]	507	@sudo make restore-luser-env
[837797e]	508	@sudo make do-housekeeping
	509	@\$(call echo_finished,$VERSION)
	510
	511	ck_UID:
	512	@if [ \`id -u\` = "0" ]; then \\
	513	echo "--------------------------------------------------"; \\
	514	echo "You cannot run this makefile from the root account"; \\
	515	echo "--------------------------------------------------"; \\
	516	exit 1; \\
	517	fi
	518
	519	mk_SETUP:
	520	@\$(call echo_SU_request)
[dbcdfd7]	521	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
[837797e]	522	@touch \$@
	523
	524	mk_LUSER: mk_SETUP
	525	@\$(call echo_SULUSER_request)
[dbcdfd7]	526	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
[837797e]	527	@touch \$@
	528
[3e7ceed]	529	mk_CUSTOM_TOOLS: create-sbu_du-report
[b4cf321]	530	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
[3bc6078]	531	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
[3e7ceed]	532	(sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
[dbcdfd7]	533	(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
[3e7ceed]	534	fi;
	535	@touch \$@
	536
[b230bd6]	537	mk_ROOT:
[3e7ceed]	538	@\$(call echo_SU_request)
[de22e80]	539	@echo "$VERSION-embedded - jhalfs build" > clfs-release && \\
	540	sudo mv clfs-release \$(MOUNT_PT)/etc
[dbcdfd7]	541	@sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
[837797e]	542	@touch \$@
	543
	544
[3e7ceed]	545	SETUP: $host_prep
	546	LUSER: $cross_tools $basicsystem $bootscripttools $bootable
	547	CUSTOM_TOOLS: $custom_list
	548	ROOT: $chowning
[837797e]	549
	550
[5cbb44c]	551	create-sbu_du-report: mk_LUSER
[1838bc7]	552	@\$(call echo_message, Building)
	553	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
[c57747d]	554	./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
[1838bc7]	555	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	556	fi;
	557	@touch \$@
	558
[837797e]	559	restore-luser-env:
	560	@\$(call echo_message, Building)
[962793a]	561	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
	562	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
[837797e]	563	fi;
[962793a]	564	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
	565	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
[837797e]	566	fi;
[962793a]	567	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
[837797e]	568	touch \$@ && \\
	569	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	570	echo --------------------------------------------------------------------------------\$(WHITE)
	571
	572	do-housekeeping:
	573	@-if [ ! -f luser-exist ]; then \\
	574	userdel \$(LUSER); \\
[962793a]	575	rm -rf \$(LUSER_HOME); \\
[837797e]	576	fi;
	577
	578	EOF
	579	) >> $MKFILE
	580
	581	# Bring over the items from the Makefile.tmp
	582	cat $MKFILE.tmp >> $MKFILE
	583	rm $MKFILE.tmp
	584	echo "Creating Makefile... ${BOLD}DONE${OFF}"
	585
	586	}
	587

Note: See TracBrowser for help on using the repository browser.

Download in other formats: