#!/bin/bash # $Id$ ################################### ### FUNCTIONS ### ################################### #----------------------------# host_prep_Makefiles() { # Initialization of the system #----------------------------# local CLFS_HOST echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}" # defined here, only for ease of reading CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")" ( cat << EOF 025-addinguser: @\$(call echo_message, Building) @if [ ! -d /home/\$(LUSER) ]; then \\ groupadd \$(LGROUP); \\ useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\ else \\ touch luser-exist; \\ fi; @touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 026-settingenvironment: 025-addinguser @\$(call echo_message, Building) @if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\ mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\ fi; @if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\ mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\ fi; @echo "set +h" > /home/\$(LUSER)/.bashrc && \\ echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\ echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\ echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\ echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\ echo "" >> /home/\$(LUSER)/.bashrc && \\ echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\ echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\ echo "" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "export CLFS_MIPS_LEVEL=\"${MIPS_LEVEL}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "export BUILD=\"${ABI}\"" >> /home/\$(LUSER)/.bashrc && \\ echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\ touch envars && \\ chown \$(LUSER):\$(LGROUP) envars @touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 027-create-directories: 026-settingenvironment @\$(call echo_message, Building) @mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt} @mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys} @mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool} @mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local} @install -d -m 0750 \$(MOUNT_PT)/root @install -d -m 1777 \$(MOUNT_PT){/var,}/tmp @mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src} @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man} @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo} @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8} @for dir in \$(MOUNT_PT)/usr{,/local}; do \\ ln -s share/{man,doc,info} \$\$dir ; \\ done @touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) 028-creating-sysfile: 027-create-directories @\$(call echo_message, Building) @touch \$(MOUNT_PT)/etc/mtab @echo "root::0:0:root:/root:/bin/ash" >> \$(MOUNT_PT)/etc/passwd @echo "root:x:0:" >> \$(MOUNT_PT)/etc/group @echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group @echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group @echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group @echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group @echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group @echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group @echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group @echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group @echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group @echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group @echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group @echo "video:x:12:" >> \$(MOUNT_PT)/etc/group @echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group @echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group @echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group @touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp} @chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog @chown -R \$(LUSER) \$(MOUNT_PT) && \\ chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) @touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) EOF ) >> $MKFILE.tmp host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile" } #-----------------------------# systemprep_Makefiles() { # #-----------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}system prep tools ( LUSER ) ${R_arrow}" for file in systemprep/* ; do # Keep the script file name this_script=`basename $file` # Set the dependency for the first target. if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi # First append each name of the script files to a list (this will become # the names of the targets in the Makefile) cross_tools="$cross_tools $this_script" # Grab the name of the target (minus the -headers or -cross in the case of gcc # and binutils in chapter 5) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then LUSER_wrt_unpack "$pkg_tarball" fi # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #-----------------------------# cross_tools_Makefiles() { # #-----------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}" for file in cross-tools/* ; do # Keep the script file name this_script=`basename $file` # # Skip this script... # NOTE.. the book indicated you only needed to install groff or file if the host # had older versions. The packages would be installed in the target directory # and not the host. case $this_script in *cflags* | *variables* | *abi | *toolchain*) # work done in host_prep_Makefiles continue ;; *) ;; esac # # Set the dependency for the first target. if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi # First append each name of the script files to a list (this will become # the names of the targets in the Makefile) cross_tools="$cross_tools $this_script" # Grab the name of the target (minus the -headers or -cross in the case of gcc # and binutils in chapter 5) name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@-static@@' \ -e 's@-final@@' \ -e 's@-64@@' \ -e 's@-n32@@'` case $name in uclibc*) name="uClibc" ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then LUSER_wrt_unpack "$pkg_tarball" # If using optimizations, write the instructions [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in .... } #-----------------------------# final_system_Makefiles() { # #-----------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}" for file in final-system/* ; do # Keep the script file name this_script=`basename $file` # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \ -e 's@temp-@@' \ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` # Find the version of the command files, if it corresponds with the building of # a specific package. pkg_tarball=$(get_package_tarball_name $name) # Append each name of the script files to a list (this will become # the names of the targets in the Makefile basicsystem="$basicsystem ${this_script}" #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... if [ "$pkg_tarball" != "" ] ; then LUSER_wrt_unpack "$pkg_tarball" # If using optimizations, write the instructions [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name" fi # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=${this_script} done # for file in final-system/* ... } #-----------------------------# bootscripts_Makefiles() { # #-----------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}" for file in bootscripts/* ; do # Keep the script file name this_script=`basename $file` case $this_script in *console*) continue ;; # Use the files that came with the bootscripts *network*) continue ;; # Manually create these files *) ;; esac # First append each name of the script files to a list (this will become # the names of the targets in the Makefile bootscripttools="$bootscripttools $this_script" # Grab the name of the target, strip id number, XXX-script name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\ -e 's@-64bit@@' \ -e 's@-64@@' \ -e 's@64@@' \ -e 's@n32@@'` case $name in *bootscripts*) name=clfs-embedded-bootscripts ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" # LUSER_wrt_RunAsUser "${file}" # [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done # for file in bootscripts/* ... } #-----------------------------# bootable_Makefiles() { # #-----------------------------# echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}" for file in bootable/* ; do # Keep the script file name this_script=`basename $file` # A little housekeeping on the scripts case $this_script in *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;; *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;; *kernel) # if there is no kernel config file do not build the kernel [[ -z $CONFIG ]] && continue # Copy the config file to /sources with a standardized name cp $CONFIG $BUILDDIR/sources/kernel-config ;; esac # # First append each name of the script files to a list (this will become # the names of the targets in the Makefile # NOTE: new makfile format forces the last script, *chowning, into a separate # phase. case ${this_script} in *chowning) chowning=${this_script} ;; *) bootable="$bootable $this_script" ;; esac # # Grab the name of the target, strip id number and misc words. name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` case $this_script in *kernel*) name=linux ;; esac pkg_tarball=$(get_package_tarball_name $name) #--------------------------------------------------------------------# # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Drop in the name of the target on a new line, and the previous target # as a dependency. Also call the echo_message function. LUSER_wrt_target "${this_script}" "$PREV" # # If $pkg_tarball isn't empty, we've got a package... [[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball" # # Select a script execution method case $this_script in *fstab*) if [[ -n "$FSTAB" ]]; then LUSER_wrt_CopyFstab else LUSER_wrt_RunAsUser "${file}" fi ;; *chowning) wrt_RunAsRoot "${file}" ;; *) LUSER_wrt_RunAsUser "${file}" ;; esac # # Housekeeping...remove any build directory(ies) except if the package build fails. [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}" # # Include a touch of the target name so make can check if it's already been made. wrt_touch # #--------------------------------------------------------------------# # >>>>>>>> END OF Makefile ENTRY <<<<<<<< # #--------------------------------------------------------------------# # # Keep the script file name for Makefile dependencies. PREV=$this_script done } #-----------------------------# build_Makefile() { # Construct a Makefile from the book scripts #-----------------------------# echo "Creating Makefile... ${BOLD}START${OFF}" cd $JHALFSDIR/${PROGNAME}-commands # Start with a clean Makefile.tmp file >$MKFILE.tmp host_prep_Makefiles [[ "${PLATFORM% -*}" = "WRT" ]] && systemprep_Makefiles # $cross_tools cross_tools_Makefiles # $cross_tools final_system_Makefiles # $basicsystem bootscripts_Makefiles # $bootscripttools bootable_Makefiles # $bootable # Add the CUSTOM_TOOLS targets, if needed [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target # Add a header, some variables and include the function file # to the top of the real Makefile. wrt_Makefile_header # Drop in the main target 'all:' and the chapter targets with each sub-target # as a dependency. ( cat << EOF all: ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_ROOT @sudo make restore-luser-env @sudo make do-housekeeping @\$(call echo_finished,$VERSION) ck_UID: @if [ \`id -u\` = "0" ]; then \\ echo "--------------------------------------------------"; \\ echo "You cannot run this makefile from the root account"; \\ echo "--------------------------------------------------"; \\ exit 1; \\ fi mk_SETUP: @\$(call echo_SU_request) @sudo make SETUP @touch \$@ mk_LUSER: mk_SETUP @\$(call echo_SULUSER_request) @(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make LUSER" ) @touch \$@ mk_CUSTOM_TOOLS: create-sbu_du-report @if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\ \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\ (sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\ (sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make CUSTOM_TOOLS"); \\ fi; @touch \$@ mk_ROOT: @\$(call echo_SU_request) @echo "$VERSION-embedded - jhalfs build" > clfs-release && \\ sudo mv clfs-release \$(MOUNT_PT)/etc @sudo make ROOT @touch \$@ SETUP: $host_prep LUSER: $cross_tools $basicsystem $bootscripttools $bootable CUSTOM_TOOLS: $custom_list ROOT: $chowning create-sbu_du-report: mk_LUSER @\$(call echo_message, Building) @if [ "\$(ADD_REPORT)" = "y" ]; then \\ ./create-sbu_du-report.sh logs $VERSION; \\ \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\ fi; @touch \$@ restore-luser-env: @\$(call echo_message, Building) @if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\ mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\ fi; @if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\ mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\ fi; @chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\ touch \$@ && \\ echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\ echo --------------------------------------------------------------------------------\$(WHITE) do-housekeeping: @-if [ ! -f luser-exist ]; then \\ userdel \$(LUSER); \\ rm -rf /home/\$(LUSER); \\ fi; EOF ) >> $MKFILE # Bring over the items from the Makefile.tmp cat $MKFILE.tmp >> $MKFILE rm $MKFILE.tmp echo "Creating Makefile... ${BOLD}DONE${OFF}" }