source: CLFS3/master.sh@ d39252b

ablfs-more legacy trunk
Last change on this file since d39252b was c57747d, checked in by Pierre Labastie <pierre@…>, 7 years ago

Make the date of the SBU_DU file the same as the one reported at the end of
the jhalfs run. Note that date is the one when the run is started

  • Property mode set to 100644
File size: 20.4 KB
Line 
1#!/bin/bash
2# $Id$
3
4###################################
5### FUNCTIONS ###
6###################################
7
8
9#----------------------------#
10host_prep_Makefiles() { # Initialization of the system
11#----------------------------#
12 local CLFS_HOST
13
14 echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
15
16 # defined here, only for ease of reading
17 CLFS_HOST="$(echo $MACHTYPE | sed "s/$(echo $MACHTYPE | cut -d- -f2)/cross/")"
18(
19cat << EOF
20
21025-addinguser:
22 @\$(call echo_message, Building)
23 @if [ ! -d \$(LUSER_HOME) ]; then \\
24 groupadd \$(LGROUP); \\
25 useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
26 else \\
27 touch luser-exist; \\
28 fi;
29 @\$(call housekeeping)
30
31026-settingenvironment: 025-addinguser
32 @\$(call echo_message, Building)
33 @if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
34 mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
35 fi;
36 @if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
37 mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
38 fi;
39 @echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
40 echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
41 echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
42 echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
43 echo "PATH=\$(MOUNT_PT)/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
44 echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
45 echo "" >> \$(LUSER_HOME)/.bashrc && \\
46 echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
47 echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
48 echo "unset PKG_CONFIG_PATH" >> \$(LUSER_HOME)/.bashrc && \\
49 echo "" >> \$(LUSER_HOME)/.bashrc && \\
50 echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
51 echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
52 echo "export CLFS_MIPS_LEVEL=\"${MIPS_LEVEL}\"" >> \$(LUSER_HOME)/.bashrc && \\
53 echo "export BUILD=\"${ABI}\"" >> \$(LUSER_HOME)/.bashrc && \\
54 echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
55 @chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
56 touch envars && \\
57 chown \$(LUSER):\$(LGROUP) envars
58 @\$(call housekeeping)
59
60027-create-directories: 026-settingenvironment
61 @\$(call echo_message, Building)
62
63 @mkdir -p \$(MOUNT_PT)/{bin,boot,dev,{etc/,}opt,home,lib,mnt}
64 @mkdir -p \$(MOUNT_PT)/{proc,media/{floppy,cdrom},sbin,srv,sys}
65 @mkdir -p \$(MOUNT_PT)/var/{lock,log,mail,run,spool}
66 @mkdir -p \$(MOUNT_PT)/var/{opt,cache,lib/{misc,locate},local}
67 @install -d -m 0750 \$(MOUNT_PT)/root
68 @install -d -m 1777 \$(MOUNT_PT){/var,}/tmp
69 @mkdir -p \$(MOUNT_PT)/usr/{,local/}{bin,include,lib,sbin,src}
70 @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{doc,info,locale,man}
71 @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/{misc,terminfo,zoneinfo}
72 @mkdir -p \$(MOUNT_PT)/usr/{,local/}share/man/man{1,2,3,4,5,6,7,8}
73 @for dir in \$(MOUNT_PT)/usr{,/local}; do \\
74 ln -s share/{man,doc,info} \$\$dir ; \\
75 done
76 @\$(call housekeeping)
77
78028-creating-sysfile: 027-create-directories
79 @\$(call echo_message, Building)
80
81 @touch \$(MOUNT_PT)/etc/mtab
82 @echo "root::0:0:root:/root:/bin/ash" >> \$(MOUNT_PT)/etc/passwd
83 @echo "root:x:0:" >> \$(MOUNT_PT)/etc/group
84 @echo "bin:x:1:" >> \$(MOUNT_PT)/etc/group
85 @echo "sys:x:2:" >> \$(MOUNT_PT)/etc/group
86 @echo "kmem:x:3" >> \$(MOUNT_PT)/etc/group
87 @echo "tty:x:4:" >> \$(MOUNT_PT)/etc/group
88 @echo "tape:x:5:" >> \$(MOUNT_PT)/etc/group
89 @echo "daemon:x:6:" >> \$(MOUNT_PT)/etc/group
90 @echo "floppy:x:7:" >> \$(MOUNT_PT)/etc/group
91 @echo "disk:x:8:" >> \$(MOUNT_PT)/etc/group
92 @echo "lp:x:9:" >> \$(MOUNT_PT)/etc/group
93 @echo "dialout:x:10:" >> \$(MOUNT_PT)/etc/group
94 @echo "audio:x:11:" >> \$(MOUNT_PT)/etc/group
95 @echo "video:x:12:" >> \$(MOUNT_PT)/etc/group
96 @echo "utmp:x:13:" >> \$(MOUNT_PT)/etc/group
97 @echo "usb:x:14:" >> \$(MOUNT_PT)/etc/group
98 @echo "cdrom:x:15:" >> \$(MOUNT_PT)/etc/group
99
100 @touch \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/{btmp,lastlog,wtmp}
101 @chmod 664 \$(MOUNT_PT)/var/run/utmp \$(MOUNT_PT)/var/log/lastlog
102 @chown -R \$(LUSER) \$(MOUNT_PT) && \\
103 chmod -R a+w \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
104 chmod -R a+w \$(SRCSDIR)
105 @\$(call housekeeping)
106
107EOF
108) >> $MKFILE.tmp
109
110 host_prep=" 025-addinguser 026-settingenvironment 027-create-directories 028-creating-sysfile"
111}
112
113#-----------------------------#
114systemprep_Makefiles() { #
115#-----------------------------#
116 echo "${tab_}${GREEN}Processing... ${L_arrow}system prep tools ( LUSER ) ${R_arrow}"
117
118 for file in systemprep/* ; do
119 # Keep the script file name
120 this_script=`basename $file`
121
122 # Set the dependency for the first target.
123 if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
124
125 # First append each name of the script files to a list (this will become
126 # the names of the targets in the Makefile)
127 cross_tools="$cross_tools $this_script"
128
129 # Grab the name of the target (minus the -headers or -cross in the case of gcc
130 # and binutils in chapter 5)
131 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
132
133 pkg_tarball=$(get_package_tarball_name $name)
134 #--------------------------------------------------------------------#
135 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
136 #--------------------------------------------------------------------#
137 #
138 # Drop in the name of the target on a new line, and the previous target
139 # as a dependency. Also call the echo_message function.
140 LUSER_wrt_target "${this_script}" "$PREV"
141 #
142 # If $pkg_tarball isn't empty, we've got a package...
143 if [ "$pkg_tarball" != "" ] ; then
144 LUSER_wrt_unpack "$pkg_tarball"
145 fi
146 #
147 LUSER_wrt_RunAsUser "${file}"
148 #
149 [[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
150 #
151 # Include a touch of the target name so make can check if it's already been made.
152 wrt_touch
153 #
154 #--------------------------------------------------------------------#
155 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
156 #--------------------------------------------------------------------#
157 #
158 # Keep the script file name for Makefile dependencies.
159 PREV=$this_script
160
161 done # for file in ....
162}
163
164
165#-----------------------------#
166cross_tools_Makefiles() { #
167#-----------------------------#
168 echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
169
170 for file in cross-tools/* ; do
171 # Keep the script file name
172 this_script=`basename $file`
173 #
174 # Skip this script...
175 # NOTE.. the book indicated you only needed to install groff or file if the host
176 # had older versions. The packages would be installed in the target directory
177 # and not the host.
178 case $this_script in
179 *cflags* | *variables* | *abi | *toolchain*) # work done in host_prep_Makefiles
180 continue ;;
181 *) ;;
182 esac
183
184 #
185 # Set the dependency for the first target.
186 if [ -z $PREV ] ; then PREV=028-creating-sysfile ; fi
187
188 # First append each name of the script files to a list (this will become
189 # the names of the targets in the Makefile)
190 cross_tools="$cross_tools $this_script"
191
192 # Grab the name of the target (minus the -headers or -cross in the case of gcc
193 # and binutils in chapter 5)
194 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
195 -e 's@-static@@' \
196 -e 's@-final@@' \
197 -e 's@-64@@' \
198 -e 's@-n32@@'`
199 case $name in
200 uclibc*) name="uClibc" ;;
201 esac
202 pkg_tarball=$(get_package_tarball_name $name)
203 #--------------------------------------------------------------------#
204 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
205 #--------------------------------------------------------------------#
206 #
207 # Drop in the name of the target on a new line, and the previous target
208 # as a dependency. Also call the echo_message function.
209 LUSER_wrt_target "${this_script}" "$PREV"
210 #
211 # If $pkg_tarball isn't empty, we've got a package...
212 if [ "$pkg_tarball" != "" ] ; then
213 LUSER_wrt_unpack "$pkg_tarball"
214 # Touch timestamp file if installed files logs will be created.
215 if [ "${INSTALL_LOG}" = "y" ] ; then
216 LUSER_wrt_TouchTimestamp
217 fi
218 # If using optimizations, write the instructions
219 [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
220 fi
221 #
222 LUSER_wrt_RunAsUser "${file}"
223 #
224 # Write installed files log and remove the build directory(ies)
225 # except if the package build fails.
226 if [ "$pkg_tarball" != "" ] ; then
227 LUSER_RemoveBuildDirs "${name}"
228 if [ "${INSTALL_LOG}" = "y" ] ; then
229 LUSER_wrt_LogNewFiles "$name"
230 fi
231 fi
232 #
233 # Include a touch of the target name so make can check if it's already been made.
234 wrt_touch
235 #
236 #--------------------------------------------------------------------#
237 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
238 #--------------------------------------------------------------------#
239 #
240 # Keep the script file name for Makefile dependencies.
241 PREV=$this_script
242
243 done # for file in ....
244}
245
246
247
248#-----------------------------#
249final_system_Makefiles() { #
250#-----------------------------#
251 echo "${tab_}${GREEN}Processing... ${L_arrow}final system ( LUSER ) ${R_arrow}"
252
253 for file in final-system/* ; do
254 # Keep the script file name
255 this_script=`basename $file`
256
257 # Grab the name of the target, strip id number, XXX-script
258 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
259 -e 's@temp-@@' \
260 -e 's@-64bit@@' \
261 -e 's@-64@@' \
262 -e 's@64@@' \
263 -e 's@n32@@'`
264
265 # Find the version of the command files, if it corresponds with the building of
266 # a specific package.
267 pkg_tarball=$(get_package_tarball_name $name)
268
269 # Append each name of the script files to a list (this will become
270 # the names of the targets in the Makefile
271 basicsystem="$basicsystem ${this_script}"
272
273 #--------------------------------------------------------------------#
274 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
275 #--------------------------------------------------------------------#
276 #
277 # Drop in the name of the target on a new line, and the previous target
278 # as a dependency. Also call the echo_message function.
279 LUSER_wrt_target "${this_script}" "$PREV"
280 #
281 # If $pkg_tarball isn't empty, we've got a package...
282 if [ "$pkg_tarball" != "" ] ; then
283 # Touch timestamp file if installed files logs will be created.
284 if [ "${INSTALL_LOG}" = "y" ] ; then
285 LUSER_wrt_TouchTimestamp
286 fi
287 LUSER_wrt_unpack "$pkg_tarball"
288 # If using optimizations, write the instructions
289 [[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
290 fi
291 #
292 LUSER_wrt_RunAsUser "${file}"
293 #
294 # Write installed files log and remove the build directory(ies)
295 # except if the package build fails.
296 if [ "$pkg_tarball" != "" ] ; then
297 LUSER_RemoveBuildDirs "${name}"
298 if [ "${INSTALL_LOG}" = "y" ] ; then
299 LUSER_wrt_LogNewFiles "$name"
300 fi
301 fi
302 #
303 # Include a touch of the target name so make can check if it's already been made.
304 wrt_touch
305 #
306 #--------------------------------------------------------------------#
307 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
308 #--------------------------------------------------------------------#
309 #
310 # Keep the script file name for Makefile dependencies.
311 PREV=${this_script}
312 done # for file in final-system/* ...
313}
314
315
316
317#-----------------------------#
318bootscripts_Makefiles() { #
319#-----------------------------#
320 echo "${tab_}${GREEN}Processing... ${L_arrow}bootscripts ( LUSER ) ${R_arrow}"
321
322 for file in bootscripts/* ; do
323 # Keep the script file name
324 this_script=`basename $file`
325
326 case $this_script in
327 *console*) continue ;; # Use the files that came with the bootscripts
328 *network*) continue ;; # Manually create these files
329 *) ;;
330 esac
331
332 # First append each name of the script files to a list (this will become
333 # the names of the targets in the Makefile
334 bootscripttools="$bootscripttools $this_script"
335
336 # Grab the name of the target, strip id number, XXX-script
337 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'\
338 -e 's@-64bit@@' \
339 -e 's@-64@@' \
340 -e 's@64@@' \
341 -e 's@n32@@'`
342 case $name in
343 *bootscripts*) name=clfs-embedded-bootscripts ;;
344 esac
345
346 pkg_tarball=$(get_package_tarball_name $name)
347
348 #--------------------------------------------------------------------#
349 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
350 #--------------------------------------------------------------------#
351 #
352 # Drop in the name of the target on a new line, and the previous target
353 # as a dependency. Also call the echo_message function.
354 LUSER_wrt_target "${this_script}" "$PREV"
355 #
356 # If $pkg_tarball isn't empty, we've got a package...
357 if [ "$pkg_tarball" != "" ] ; then
358 LUSER_wrt_unpack "$pkg_tarball"
359 if [ "${INSTALL_LOG}" = "y" ] ; then
360 LUSER_wrt_TouchTimestamp
361 fi
362 fi
363 #
364 LUSER_wrt_RunAsUser "${file}"
365 #
366 if [ "$pkg_tarball" != "" ] ; then
367 LUSER_RemoveBuildDirs "${name}"
368 if [ "${INSTALL_LOG}" = "y" ] ; then
369 LUSER_wrt_LogNewFiles "$name"
370 fi
371 fi
372 #
373 # Include a touch of the target name so make can check if it's already been made.
374 wrt_touch
375 #
376 #--------------------------------------------------------------------#
377 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
378 #--------------------------------------------------------------------#
379 #
380 # Keep the script file name for Makefile dependencies.
381 PREV=$this_script
382
383 done # for file in bootscripts/* ...
384
385}
386
387
388#-----------------------------#
389bootable_Makefiles() { #
390#-----------------------------#
391 echo "${tab_}${GREEN}Processing... ${L_arrow}make bootable ( LUSER ) ${R_arrow}"
392
393 for file in bootable/* ; do
394 # Keep the script file name
395 this_script=`basename $file`
396
397 # A little housekeeping on the scripts
398 case $this_script in
399 *grub | *aboot | *colo | *silo | *arcload | *lilo | *reboot* ) continue ;;
400 *fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
401 *kernel) # if there is no kernel config file do not build the kernel
402 [[ -z $CONFIG ]] && continue
403 # Copy the config file to /sources with a standardized name
404 cp $CONFIG $BUILDDIR/sources/kernel-config
405 ;;
406 esac
407 #
408 # First append each name of the script files to a list (this will become
409 # the names of the targets in the Makefile
410 # NOTE: new makfile format forces the last script, *chowning, into a separate
411 # phase.
412 case ${this_script} in
413 *chowning) chowning=${this_script} ;;
414 *) bootable="$bootable $this_script" ;;
415 esac
416 #
417 # Grab the name of the target, strip id number and misc words.
418 name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
419 case $this_script in
420 *kernel*) name=linux
421 ;;
422 esac
423
424 pkg_tarball=$(get_package_tarball_name $name)
425
426 #--------------------------------------------------------------------#
427 # >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
428 #--------------------------------------------------------------------#
429 #
430 # Drop in the name of the target on a new line, and the previous target
431 # as a dependency. Also call the echo_message function.
432 LUSER_wrt_target "${this_script}" "$PREV"
433 #
434 # If $pkg_tarball isn't empty, we've got a package...
435 if [ "$pkg_tarball" != "" ] ; then
436 LUSER_wrt_unpack "$pkg_tarball"
437 if [ "${INSTALL_LOG}" = "y" ] ; then
438 LUSER_wrt_TouchTimestamp
439 fi
440 fi
441 #
442 # Select a script execution method
443 case $this_script in
444 *fstab*) if [[ -n "$FSTAB" ]]; then
445 LUSER_wrt_CopyFstab
446 else
447 LUSER_wrt_RunAsUser "${file}"
448 fi
449 ;;
450 *chowning) wrt_RunAsRoot "${file}"
451 ;;
452 *) LUSER_wrt_RunAsUser "${file}"
453 ;;
454 esac
455 #
456 # Housekeeping...remove any build directory(ies) except if the package build fails.
457 if [ "$pkg_tarball" != "" ] ; then
458 LUSER_RemoveBuildDirs "${name}"
459 if [ "${INSTALL_LOG}" = "y" ] ; then
460 LUSER_wrt_LogNewFiles "$name"
461 fi
462 fi
463 #
464 # Include a touch of the target name so make can check if it's already been made.
465 wrt_touch
466 #
467 #--------------------------------------------------------------------#
468 # >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
469 #--------------------------------------------------------------------#
470 #
471 # Keep the script file name for Makefile dependencies.
472 PREV=$this_script
473
474 done
475
476}
477
478
479#-----------------------------#
480build_Makefile() { # Construct a Makefile from the book scripts
481#-----------------------------#
482 echo "Creating Makefile... ${BOLD}START${OFF}"
483
484 cd $JHALFSDIR/${PROGNAME}-commands
485 # Start with a clean Makefile.tmp file
486 >$MKFILE.tmp
487
488 host_prep_Makefiles
489 [[ "${PLATFORM% -*}" = "WRT" ]] && systemprep_Makefiles # $cross_tools
490 cross_tools_Makefiles # $cross_tools
491 final_system_Makefiles # $basicsystem
492 bootscripts_Makefiles # $bootscripttools
493 bootable_Makefiles # $bootable
494 # Add the CUSTOM_TOOLS targets, if needed
495 [[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
496
497 # Add a header, some variables and include the function file
498 # to the top of the real Makefile.
499 wrt_Makefile_header
500
501 # Drop in the main target 'all:' and the chapter targets with each sub-target
502 # as a dependency.
503(
504cat << EOF
505
506all: ck_UID mk_SETUP mk_LUSER create-sbu_du-report mk_CUSTOM_TOOLS mk_ROOT
507 @sudo make restore-luser-env
508 @sudo make do-housekeeping
509 @\$(call echo_finished,$VERSION)
510
511ck_UID:
512 @if [ \`id -u\` = "0" ]; then \\
513 echo "--------------------------------------------------"; \\
514 echo "You cannot run this makefile from the root account"; \\
515 echo "--------------------------------------------------"; \\
516 exit 1; \\
517 fi
518
519mk_SETUP:
520 @\$(call echo_SU_request)
521 @sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
522 @touch \$@
523
524mk_LUSER: mk_SETUP
525 @\$(call echo_SULUSER_request)
526 @(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) LUSER" )
527 @touch \$@
528
529mk_CUSTOM_TOOLS: create-sbu_du-report
530 @if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
531 \$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
532 (sudo \$(SU_LUSER) "mkdir -p $BUILDDIR$TRACKING_DIR"); \\
533 (sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
534 fi;
535 @touch \$@
536
537mk_ROOT:
538 @\$(call echo_SU_request)
539 @echo "$VERSION-embedded - jhalfs build" > clfs-release && \\
540 sudo mv clfs-release \$(MOUNT_PT)/etc
541 @sudo make BREAKPOINT=\$(BREAKPOINT) ROOT
542 @touch \$@
543
544
545SETUP: $host_prep
546LUSER: $cross_tools $basicsystem $bootscripttools $bootable
547CUSTOM_TOOLS: $custom_list
548ROOT: $chowning
549
550
551create-sbu_du-report: mk_LUSER
552 @\$(call echo_message, Building)
553 @if [ "\$(ADD_REPORT)" = "y" ]; then \\
554 ./create-sbu_du-report.sh logs $VERSION $(date --iso-8601); \\
555 \$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
556 fi;
557 @touch \$@
558
559restore-luser-env:
560 @\$(call echo_message, Building)
561 @if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
562 mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
563 fi;
564 @if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
565 mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
566 fi;
567 @chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
568 touch \$@ && \\
569 echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
570 echo --------------------------------------------------------------------------------\$(WHITE)
571
572do-housekeeping:
573 @-if [ ! -f luser-exist ]; then \\
574 userdel \$(LUSER); \\
575 rm -rf \$(LUSER_HOME); \\
576 fi;
577
578EOF
579) >> $MKFILE
580
581 # Bring over the items from the Makefile.tmp
582 cat $MKFILE.tmp >> $MKFILE
583 rm $MKFILE.tmp
584 echo "Creating Makefile... ${BOLD}DONE${OFF}"
585
586}
587
Note: See TracBrowser for help on using the repository browser.