Context Navigation

source: Config.in@ 018ab00

ablfs-more legacy trunk

Last change on this file since 018ab00 was e3ccc27, checked in by Pierre Labastie <pierre@…>, 4 years ago

Config.in: Reinstate the whole menus if "Rebuild Makefile" is ticked

Building the Makefile needs quite a few variables set, which
are scattered in all the menus of Config.in. So all the menus
are needed.

Property mode set to 100644

File size: 42.0 KB

Rev	Line
[aa283c0]	1	# $Id$
[e5d44f5]	2	menu "BOOK Settings"
	3
	4	#--- BOOK/script
	5	choice
	6	prompt "Use BOOK"
	7	default BOOK_LFS
	8	help
	9	Select the book where build instructions are retrieved.
	10
	11	config BOOK_LFS
	12	bool "Linux From Scratch System V"
	13	help
[706e5bf]	14	Set up the tools to build LFS with SysV init.
[e5d44f5]	15
	16	config BOOK_LFS_SYSD
	17	bool "Linux From Scratch systemd"
	18	help
	19	Set up the tools to build LFS with systemd init.
	20
	21	config BOOK_CLFS
	22	bool "Cross-Compiled Linux From Scratch"
	23	help
	24	Set up the tools to build CLFS.
	25
	26	config BOOK_CLFS2
	27	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
	28	help
	29	Set up the tools to build CLFS by the sysroot method.
	30
	31	config BOOK_CLFS3
	32	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
	33	help
	34	Set up the tools to build CLFS with tools for embedded systems.
	35
	36	config BOOK_BLFS
	37	bool "Beyond Linux From Scratch (see help)"
	38	help
	39	if the (C)LFS system has already been built, install the tools
	40	to build BLFS packages.
	41	endchoice
	42
[39dc04a]	43	choice
[f596dde]	44	depends on BOOK_BLFS
[39dc04a]	45	prompt "Init system"
	46
	47	config BLFS_SYSV
[706e5bf]	48	bool "BLFS SysV"
[39dc04a]	49	help
[706e5bf]	50	Extract the SysV flavour of the BLFS book
[39dc04a]	51
	52	config BLFS_SYSD
	53	bool "BLFS systemd"
	54	help
	55	Extract the systemd flavour of the BLFS book
	56
	57	endchoice
	58
[e5d44f5]	59	config INITSYS
	60	string
[39dc04a]	61	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	62	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	63
	64	config PROGNAME
	65	string
	66	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	67	default "clfs" if BOOK_CLFS
	68	default "clfs2" if BOOK_CLFS2
	69	default "clfs3" if BOOK_CLFS3
	70
	71	config RUN_ME
	72	string
	73	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_CLFS \|\| \
	74	BOOK_CLFS2 \|\| BOOK_CLFS_3
	75	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	76	#--- End BOOK/script
	77
	78	#--- Book version
	79	choice
	80	prompt "Release"
	81	default relSVN if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_BLFS
	82	default relGIT if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	83
	84	config relSVN
	85	bool "SVN"
	86	depends on BOOK_LFS \|\| BOOK_BLFS \|\| BOOK_LFS_SYSD
	87	help
	88	Current development version as in trunk
	89
	90	config relGIT
	91	bool "GIT"
	92	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	93	help
	94	Current development git master branch
	95
	96	config WORKING_COPY
	97	bool "Working Copy"
	98	help
	99	A local working copy
	100
	101	config BRANCH
	102	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
	103	help
	104	A supported SVN/GIT branch or stable released book
	105	endchoice
	106
	107	config BRANCH_ID
	108	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	109	default "EDIT ME"
[f596dde]	110	depends on BRANCH
[e5d44f5]	111	help
	112	A list of valid branches and stable book IDs is available at
	113	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	114
	115	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	116	YYY version.
	117
	118	config BOOK
	119	string "Loc of working copy (mandatory)"
	120	default "EDIT ME"
[f596dde]	121	depends on WORKING_COPY
[e5d44f5]	122	help
	123	The full path to a local copy of the book XML sources
	124
[13e52a5]	125	choice
	126	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && (BRANCH \|\| WORKING_COPY)
	127	prompt "Mutilib"
	128	default LFS_MULTILIB_NO
	129	config LFS_MULTILIB_NO
	130	bool "Standard LFS on i686 or amd64"
	131	help
[b6e981a]	132	Use standard LFS book (choose this if not multilib source)
[13e52a5]	133
	134	config LFS_MULTILIB_I686
	135	bool "Multilib LFS on amd64 with i686 libraries"
	136	help
	137	Use Multilib LFS book with i686 libraries
	138
	139	config LFS_MULTILIB_X32
	140	bool "Multilib LFS on amd64 with x32 libraries"
	141	help
	142	Use Multilib LFS book with x32 libraries
	143
	144	config LFS_MULTILIB_ALL
	145	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	146	help
	147	Use Multilib LFS book with i686 and x32 libraries
	148
	149	endchoice
	150
	151	config MULTILIB
	152	string
	153	default "default" if LFS_MULTILIB_NO
	154	default "ml_32" if LFS_MULTILIB_I686
	155	default "ml_x32" if LFS_MULTILIB_X32
	156	default "ml_all" if LFS_MULTILIB_ALL
	157
[e5d44f5]	158	#--- End BOOK version
	159
	160	#--- CLFS specific params
	161	choice
	162	prompt "Target architecture"
	163	default ARCH_X86
[f596dde]	164	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[e5d44f5]	165	help
	166	Choose the target system base architecture
	167
	168	config ARCH_X86
	169	bool "x86"
	170
	171	config ARCH_MIPS
	172	bool "mips" if !BOOK_CLFS2
	173
	174	config ARCH_PPC
	175	bool "ppc" if BOOK_CLFS
	176
	177	config ARCH_SPARC
	178	bool "sparc" if BOOK_CLFS
	179
	180	config ARCH_ALPHA
	181	bool "alpha" if !BOOK_CLFS3
	182
	183	config ARCH_ARM
	184	bool "arm" if !BOOK_CLFS
	185
	186	config ARCH_HPPA
	187	bool "hppa" if BOOK_CLFS2
	188	endchoice
	189
	190	choice
	191	prompt "Hardware Platform"
[f596dde]	192	depends on BOOK_CLFS3 && ARCH_MIPS
[e5d44f5]	193	default PLATFORM_GENERIC
	194	help
	195	Choose a destination platform
	196	Platform specific files will be included
	197
	198	config PLATFORM_GENERIC
	199	bool "Generic platform"
	200
	201	config PLATFORM_WRT
	202	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	203	endchoice
	204
	205	choice
	206	prompt "Library"
[f596dde]	207	depends on (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
[e5d44f5]	208	default DATA_32
	209	help
	210	Choose the target system libraries type
	211
	212	config DATA_32
	213	bool "32-bit"
[a705708]	214
[e5d44f5]	215	config DATA_64
	216	bool "64-bit"
	217
	218	config DATA_MULTI
	219	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
	220	endchoice
[a705708]	221
[e5d44f5]	222	choice
	223	prompt "Processor type"
[f596dde]	224	depends on (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
[e5d44f5]	225	help
	226	Choose the target system processor
[a705708]	227
[e5d44f5]	228	config PROC_i486
	229	bool "486 Compatibles" if ARCH_X86
[a705708]	230
[e5d44f5]	231	config PROC_i586
	232	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	233
[e5d44f5]	234	config PROC_i686
	235	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	236
[e5d44f5]	237	config PROC_mipsel
	238	bool "MIPS Little Endian" if ARCH_MIPS
[2035ea1]	239
[e5d44f5]	240	config PROC_mips
	241	bool "MIPS Big Endian" if ARCH_MIPS
[2035ea1]	242
[e5d44f5]	243	config PROC_unknown
	244	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	245
[e5d44f5]	246	config PROC_hppa1
	247	bool "PA 7000 Series" if ARCH_HPPA
[c560e9a]	248
[e5d44f5]	249	config PROC_hppa2
	250	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	251
[e5d44f5]	252	config PROC_EV5
	253	bool "EV5 Series" if ARCH_ALPHA
[c560e9a]	254
[e5d44f5]	255	config PROC_EV56
	256	bool "EV56 Series" if ARCH_ALPHA
[c560e9a]	257
[e5d44f5]	258	config PROC_PCA56
	259	bool "PCA56 Series" if ARCH_ALPHA
[c560e9a]	260
[e5d44f5]	261	config PROC_PCA57
	262	bool "PCA57 Series" if ARCH_ALPHA
[c560e9a]	263
[e5d44f5]	264	config PROC_EV6
	265	bool "EV6 Series" if ARCH_ALPHA
[c560e9a]	266
[e5d44f5]	267	config PROC_EV67
	268	bool "EV67 Series" if ARCH_ALPHA
[a87e07a]	269
[e5d44f5]	270	config PROC_EV68
	271	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	272
[e5d44f5]	273	config PROC_ARM
	274	bool "Generic arm, little endian" if ARCH_ARM
[a87e07a]	275
[e5d44f5]	276	config PROC_ARM5L
	277	bool "Generic arm, version 5, little endian" if ARCH_ARM
[650acce]	278
[e5d44f5]	279	config PROC_ARM5B
	280	bool "Generic arm, version 5, big endian" if ARCH_ARM
[650acce]	281
[e5d44f5]	282	config PROC_ULTRA1
	283	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[650acce]	284
[e5d44f5]	285	config PROC_ULTRA2
	286	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[a705708]	287
[e5d44f5]	288	config PROC_ULTRA3
	289	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	290	endchoice
[c63c0fa]	291
[e5d44f5]	292	choice
	293	prompt "MIPS 64 ABI"
[f596dde]	294	depends on BOOK_CLFS3 && ARCH_MIPS && DATA_64
[e5d44f5]	295	default ABI_64
	296	help
	297	Choose the target system ABI to use
[c63c0fa]	298
[e5d44f5]	299	config ABI_32
	300	bool "o32"
[c63c0fa]	301
[e5d44f5]	302	config ABI_N32
	303	bool "n32"
[c63c0fa]	304
[e5d44f5]	305	config ABI_64
	306	bool "n64"
	307	endchoice
[c5ff430]	308
[e5d44f5]	309	config TARGET
	310	string
	311	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	312	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	313	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[2639f65]	314
[e5d44f5]	315	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	316	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	317	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	318
[e5d44f5]	319	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[a705708]	320
[e5d44f5]	321	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	322	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	323	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	324	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	325
[e5d44f5]	326	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
	327	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
	328	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	329	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	330
[e5d44f5]	331	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	332	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI \|\| DATA_64)
[2035ea1]	333
[e5d44f5]	334	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	335	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	336
	337	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
	338	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	339	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	340
	341	default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
	342
	343	default "arm-unknown-linux-uclibc" if PROC_ARM
	344	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	345	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
	346
	347	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	348	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	349	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	350	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	351	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	352	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	353	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	354	default "alphaev68-unknown-linux-gnu" if PROC_EV68
	355
	356	config TARGET32
	357	string
[f596dde]	358	depends on DATA_MULTI
[e5d44f5]	359	default "i686-pc-linux-gnu" if ARCH_X86
	360	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	361	default "mips-unknown-linux-gnu" if PROC_mips
	362	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	363	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	364
	365	config PLATFORM
	366	string
	367	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	368	default "WRT - Wireless Router" if PLATFORM_WRT
	369
	370	config SPARC64_PROC
	371	string
	372	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	373	default "1" if PROC_ULTRA1
	374	default "2" if PROC_ULTRA2
	375	default "3" if PROC_ULTRA3
	376
	377	config ARCH
	378	string
	379	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	380	default "x86_64" if ARCH_X86 && DATA_MULTI
	381	default "x86_64-64" if ARCH_X86 && DATA_64
	382
	383	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	384
	385	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	386	default "mips64" if ARCH_MIPS && DATA_MULTI
	387	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
	388
	389
	390	default "ppc" if ARCH_PPC && DATA_32
	391	default "ppc64" if ARCH_PPC && DATA_MULTI
	392	default "ppc64-64" if ARCH_PPC && DATA_64
	393
	394	default "sparc" if ARCH_SPARC && DATA_32
	395	default "sparc64" if ARCH_SPARC && DATA_MULTI
	396	default "sparc64-64" if ARCH_SPARC && DATA_64
	397
	398	default "alpha" if ARCH_ALPHA
	399	default "arm" if ARCH_ARM
	400	default "hppa" if ARCH_HPPA
	401
	402	config MIPS_LEVEL
	403	string
[f596dde]	404	depends on BOOK_CLFS3 && ARCH_MIPS
[e5d44f5]	405	default "1" if DATA_32
	406	default "3" if DATA_64
	407
	408	config ABI
	409	string
[f596dde]	410	depends on BOOK_CLFS3
[e5d44f5]	411	default "-m32" if ARCH_X86 \|\| ARCH_ARM
	412	# default "-m64" if NO USED YET IN THE BOOK
	413	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	414	default "-mabi=n32" if ABI_N32
	415	default "-mabi=64" if ABI_64
	416
	417	config ENDIAN
	418	string
[f596dde]	419	depends on BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
[e5d44f5]	420	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	421	default "big" if PROC_mips \|\| PROC_ARM5B
	422
	423	choice
	424	prompt "Build method"
[f596dde]	425	depends on BOOK_CLFS
[e5d44f5]	426	help
	427	What build method should be used: a chroot jail or minimal boot
	428	system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
	429	a full explanation.
	430
	431	config BUILD_CHROOT
	432	bool "chroot"
	433
	434	config BUILD_BOOT
	435	bool "boot"
	436	endchoice
	437
	438	config METHOD
	439	string
	440	default "chroot" if BUILD_CHROOT
	441	default "boot" if BUILD_BOOT
	442
	443	config BOOT_CONFIG
	444	string "BOOT kernel config file (mandatory)"
	445	default "*EDIT ME*"
	446	depends on BUILD_BOOT
	447	help
	448	If METHOD=boot, location of boot-kernel config file
	449	The config file will be copied to ${BUILD_DIR}/sources
	450	and renamed 'bootkernel-config'
	451	NOTE: this setting is required
	452	#--- End CLFS specific params
	453
	454	#--- blfs-tool Support
	455	config BLFS_TOOL
	456	bool "Add blfs-tool support"
	457	default n
	458	depends on !BOOK_CLFS3 && !BOOK_BLFS
	459	help
	460	Activating this option will install additional packages needed
	461	to use blfs tools after booting the new system.
	462	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	463	(see below).
	464	After booting the new xLFS system, but before using the blfs tools,
	465	you should create a user account, move the /blfs_root directory
	466	to that user's home, and change its ownership to that of the user.
	467	Also, be sure to give the user read and write access on the
	468	$TRACKING_DIR directory and the files that it contains.
	469	Don't forget to configure sudo properly on the new system.
	470
	471	config DUMMY # Avoid indenting the items below
	472	bool
	473
	474	if BLFS_TOOL
	475	menu "blfs-tool dependencies"
	476
	477	config DEP_LIBXML
	478	bool "libxml2 (required)"
	479	default y
	480
	481	config DEP_LIBXSLT
	482	bool "libxslt (required)"
	483	default y
	484
	485	config DEP_DBXML
	486	bool "DocBook XML DTD (required)"
	487	default y
	488
	489	config DEP_LYNX
	490	bool "lynx (optional, for reading the generated book)"
	491	default y
	492
	493	config DEP_SUDO
	494	bool "sudo (recommended)"
	495	default y
	496
	497	config DEP_WGET
	498	bool "wget (recommended)"
	499	default y
	500
	501	config DEP_GPM
	502	bool "GPM (optional, see help)"
	503	default n
	504	help
	505	if you install gpm, it will be started
[90f5b6d]	506	automatically on boot. It allows copy-paste
	507	while Xorg is not installed.
[e5d44f5]	508
	509	config DEP_SVN
	510	bool "SVN client (optional, see help)"
	511	default n
	512	help
	513	Subversion is needed for updating the book
[90f5b6d]	514	sources. You do not need it if building a
	515	stable book.
[e5d44f5]	516
	517	endmenu
	518
	519	choice
	520	prompt "BLFS Release"
	521	default BLFS_SVN
	522
	523	config BLFS_SVN
	524	bool "BLFS SVN"
	525	help
	526	Current development version as in trunk
	527
	528	config BLFS_WORKING_COPY
	529	bool "BLFS working copy"
	530	help
	531	A local working copy of the BLFS book.
	532
	533	config BLFS_BRANCH
	534	bool "BLFS Branch or stable book"
	535	help
	536	A supported SVN branch or stable book release
	537	endchoice
	538
	539	config BLFS_WC_LOCATION
	540	string "Location of the local BLFS working copy (mandatory)"
	541	default "EDIT ME"
	542	depends on BLFS_WORKING_COPY
	543	help
[506120ee]	544	Full path to the BLFS book working copy
[e5d44f5]	545
	546	config BLFS_BRANCH_ID
	547	string "BLFS Book Version (mandatory)"
	548	default "EDIT ME"
	549	depends on BLFS_BRANCH
	550	help
	551	A list of valid branches and stable book IDs is available at
	552	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	553	endif
	554	#--- End blfs-tool Support
	555
	556	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	557	# or directly)
	558	config BLFS_ROOT
	559	string "Root of the tools directory (see help)"
	560	default "/blfs_root"
	561	depends on BLFS_TOOL \|\| BOOK_BLFS
	562	help
	563	Path to the directory where all required files and scripts
	564	will be stored.
	565
	566	This path must begin with a slash, and:
	567	- is relative to the user's HOME directory when installing the
	568	blfs tools on an already existing LFS system.
	569	- is relative to the root of the build directory (`/' in chroot)
	570	when adding the tools after a jhalfs run
	571
	572	CAUTION: this directory will be removed if it already exists.
	573
	574	config BLFS_XML
	575	string "BLFS sources directory (internal parameter)"
	576	default "blfs-xml"
[f596dde]	577	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	578	help
	579	The directory name under $BLFS_ROOT where the BLFS
	580	book sources will be copied or checked out. Do not change that
	581	unless you know what you are doing...
[506120ee]	582
[f733772]	583	config LFS_XML
	584	string "LFS sources directory (internal parameter)"
	585	default "lfs-xml"
[f596dde]	586	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	587	help
	588	The directory name under $BLFS_ROOT where the LFS
	589	book sources will be copied or checked out. Do not change that
	590	unless you know what you are doing...
	591
[506120ee]	592	choice
	593	prompt "LFS Release"
[f596dde]	594	default LFS_relSVN
	595	depends on BOOK_BLFS
[506120ee]	596
	597	config LFS_relSVN
	598	bool "LFS SVN"
	599	help
	600	Current development version as in trunk
	601
	602	config LFS_WORKING_COPY
	603	bool "LFS working copy"
	604	help
	605	A local working copy of the LFS book.
	606
	607	config LFS_BRANCH
	608	bool "LFS Branch or stable book"
	609	help
	610	A supported SVN branch or stable book release
	611	endchoice
	612
	613	config BLFS_LFS_BOOK
	614	string "Location of the local LFS working copy (mandatory)"
	615	default "EDIT ME"
	616	depends on LFS_WORKING_COPY
	617	help
	618	Full path to the LFS book working copy"
	619
	620	config BLFS_LFS_BRANCH_ID
	621	string "LFS Book Version (mandatory)"
	622	default "EDIT ME"
	623	depends on LFS_BRANCH
	624	help
	625	A list of valid branches and stable book IDs is available at
	626	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	627	# End of BLFS parameters
	628
	629	#--- Custom Tools support
	630	config CUSTOM_TOOLS
[f596dde]	631	depends on !BOOK_BLFS
[e5d44f5]	632	bool "Add custom tools support"
	633	default n
	634	help
	635	Activating this option additional packages you create
	636	will be installed after finished the xLFS system build.
	637	#--- End Custom Tools support
	638
[e3ccc27]	639	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	640	# As well.
	641	config TRACKING_DIR
	642	string "Installed packages database directory"
	643	default "/var/lib/jhalfs/BLFS"
	644	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	645	help
	646	Full path to the directory where the database of
	647	installed packages will be created.
	648
	649	If the blfs tools are installed on a running xLFS system,
	650	the user must have enough privileges to create this directory.
	651	It may be necessary to create the /var/lib/jhalfs directory as
	652	root, and make it writable by the user before running this tool.
	653
	654	If you are installing the blfs tools as part of an xLFS build
	655	and/or using the customized scripts feature, you will
	656	need to fix this directory's permissions after booting
	657	the new system.
	658
	659	Note that the user that will build the packages must
	660	have read and write access to this directory.
[53f291f]	661
[a705708]	662	#--- End BOOK Settings
	663	endmenu
	664
[e5d44f5]	665	menu "General Settings"
[e3ccc27]	666	depends on !BOOK_BLFS
[e5d44f5]	667
[b7583ec]	668	#--- {C,H,}LFS User Account
	669
	670	config LUSER
[e5d44f5]	671	string
	672	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	673	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	674	default "hlfs" if BOOK_HLFS
	675
	676	config LGROUP
	677	string
[b7583ec]	678	default LUSER
[e5d44f5]	679
	680	config LHOME
	681	string
[b7583ec]	682	default "/home"
	683
[e5d44f5]	684	#--- End Set User Account
	685
	686	config BUILDDIR
	687	string "Build Directory"
	688	default "/mnt/build_dir"
	689	help
	690	#-- The directory where the created system will be located.
	691	# NOTE: A working directory named jhalfs will be created
	692	# here, so ensure this does not conflict with the jhalfs
	693	# source directory.
	694
	695	config GETPKG
	696	bool "Retrieve source files"
	697	default n
	698	help
	699	#-- Download all packages and patches required by the selected book
	700	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	701	# first and if necessary retrieves them from the 'net.
	702	# Files will be transferred to $BUILDDIR/sources.
	703
	704	config SRC_ARCHIVE
	705	string "Package Archive Directory"
	706	default "$SRC_ARCHIVE"
[f596dde]	707	depends on GETPKG
[e5d44f5]	708	help
	709	#-- A local archive for packages/files (not $BUILDDIR/sources)
	710	# Any missing file will be downloaded and archived here,
	711	# if the user has the right privileges.
	712
	713	config RETRYSRCDOWNLOAD
	714	bool "Retry on 'connection refused' failure"
	715	default n
[f596dde]	716	depends on GETPKG
[e5d44f5]	717	help
	718	#-- Attempt to download a source package again if it fails
	719	# with a 'connection refused' error. This can happen on
	720	# servers that are overloaded.
	721
	722	config RETRYDOWNLOADCNT
	723	int "Number of retry attempts on download failures"
	724	default 20
[f596dde]	725	depends on GETPKG
[e5d44f5]	726	help
	727	#-- Number of times to retry a failed download.
	728
	729	config DOWNLOADTIMEOUT
	730	int "Download timeout (in seconds)"
	731	default 30
[f596dde]	732	depends on GETPKG
[e5d44f5]	733	help
	734	#-- Number of seconds to wait for a download to start before
	735	# timing out.
	736
	737	config SERVER
	738	string "FTP mirror"
	739	default "http://ftp.osuosl.org"
[f596dde]	740	depends on GETPKG
[e5d44f5]	741	help
	742	#-- FTP mirror to download packages and patches if not found
	743	# in $SRC_ARCHIVE
	744	# As a last resort, the files will downloaded from upstream,
	745	# if possible.
	746
	747	config RUNMAKE
	748	bool "Run the makefile"
	749	default n
	750	help
	751	#-- Automatically run the makefile once it has been created
	752
	753	config CLEAN
	754	bool "Rebuild files"
	755	default n
	756	help
	757	#-- Clean the build directory before performing any other task.
	758	# The directory is cleaned only if it was populated by a
	759	# previous JHALFS run.
[a705708]	760
	761	#--- End General Settings
	762	endmenu
	763
[e5d44f5]	764	menu "Build Settings"
[e3ccc27]	765	depends on !BOOK_BLFS
[e5d44f5]	766
	767	#--- Test Suites
	768	config CONFIG_TESTS
	769	bool "Run testsuites"
[f596dde]	770	depends on !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	771	default y
	772	help
	773	#-- Run test suites
[1d5f3e3]	774	# If you select 'y' here:
[e5d44f5]	775	# You will have to select between:
[945ccaa]	776	# - Only critical final system testsuites
[e5d44f5]	777	# - All final system testsuites
	778	# - Both temporary tools and final system testsuites
	779	# You will be prompted also about the "flavour" of the
	780	# testsuites run:
	781	# - Don't stop on test suite failures
	782	# - Abort the build at the first test suite failure
	783	#
[1d5f3e3]	784	# Note that in any case, all the test instructions will
	785	# be generated. Those which are not wanted will be commented
	786	# out. If you select 'n' here, the commented test instructions
	787	# do not stop on test suite failures.
	788	#
	789	# HLFS and CLFS have no testsuites available in the
	790	# temporary tools phase
[e5d44f5]	791
[945ccaa]	792	menu "Test settings"
[f596dde]	793	depends on CONFIG_TESTS
[e5d44f5]	794	choice
	795	prompt "Tests level"
	796	default TST_1
	797
	798	config TST_1
[945ccaa]	799	bool "Only final system critical testsuites"
	800	help
	801	#-- Critical tests:
	802	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	803	# testsuites for final system. The others are commented
	804	# out.
[e5d44f5]	805
	806	config TST_2
	807	bool "All final system testsuites"
[1d5f3e3]	808	help
	809	#-- All final system test suites:
	810	# Test instructions for the temporary tools (if available)
	811	# are commented out.
[e5d44f5]	812
	813	config TST_3
[945ccaa]	814	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
	815	help
	816	#-- All tests:
[1d5f3e3]	817	# Runs all the testsuites for both temporary tools (if
	818	# available) and final system
[e5d44f5]	819	endchoice
	820
	821	choice
	822	prompt "Flavour"
	823
	824	config NO_BOMB
[945ccaa]	825	bool "Don't stop on test failures"
[e5d44f5]	826
	827	config BOMB
[945ccaa]	828	bool "Abort the build on the first test failure"
[e5d44f5]	829	endchoice
	830
[30a8961]	831	endmenu # test settings
	832
[945ccaa]	833	config TEST
	834	int
	835	default "0" if !CONFIG_TESTS
	836	default "1" if TST_1
	837	default "2" if TST_2
	838	default "3" if TST_3
	839
[e5d44f5]	840	config BOMB_TEST
	841	bool
	842	default n if NO_BOMB
	843	default y if BOMB
[30a8961]	844	#--- End Test Suites
[e5d44f5]	845
	846	#--- Package Management
	847	config PKGMNGT
	848	bool "Package management"
[f596dde]	849	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	850	default n
	851	help
	852	#-- Use package management
	853	#
[945ccaa]	854	# If set, you'll have to choose between
	855	# two package management styles:
	856	# - Build and install:
	857	# the packages in the final phase are built
	858	# in a separate directory, PKG_DEST.
	859	# You should provide a bash function for
[4b2a5fd]	860	# packaging and installing the package.
[945ccaa]	861	# - Preload a library before install:
	862	# Run the install instructions inside a
	863	# wrapper command, which monitors the
	864	# installed files.
	865	#
[e5d44f5]	866	# Also, you have to provide the instructions
	867	# to build the package manager during the
	868	# temporary tools phase, in the form of a
	869	# sect1 of the book identical to a package
	870	# sect1. See README.PACKAGE_MANAGEMENT
	871	#
	872	# For now, this only works with LFS
[945ccaa]	873	choice
[f596dde]	874	depends on PKGMNGT
[945ccaa]	875	prompt "Package management style"
	876	default PKG_PACK
	877
	878	config PKG_PACK
	879	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	880
[945ccaa]	881	config LIB_LOAD
	882	bool "Preload a library before installing (porg style)"
	883	endchoice
	884
	885	config WRAP_INSTALL
	886	bool
	887	default y if LIB_LOAD
	888	default n if PKG_PACK
[e5d44f5]	889	#--- End package management
	890
	891	#--- Installed files logs
	892	config INSTALL_LOG
	893	bool "Create a log of installed files for each package"
	894	default n
	895	help
	896	#-- Select this if you want to create logs of the files
	897	# installed by each package on the final system.
	898
	899	#--- End Installed files logs
	900
[945ccaa]	901	config STRIP
	902	bool "Strip Installed Binaries/Libraries"
	903	default n
	904	depends on !BOOK_CLFS3
	905
[dc7fd7b]	906	config DEL_LA_FILES
[d2a7ec8]	907	bool "Remove libtool .la files"
[dc7fd7b]	908	default y
	909	help
	910	#-- Remove files libxxx.la installed by libtool. For a rationale
	911	# see https://blog.flameeyes.eu/tags/lafiles/
	912
[945ccaa]	913	config NO_PROGRESS_BAR
[f596dde]	914	bool "DO NOT use/display progress_bar"
[945ccaa]	915	default n
	916	help
	917	#-- Do not use the progress bar routine. On slower machines
	918	# this function consumes precious CPU cycles.
	919
	920	#--- End Build Settings
	921	endmenu
	922
[6990d80]	923	menu "System configuration"
[e3ccc27]	924	depends on !BOOK_BLFS
[945ccaa]	925
[e5d44f5]	926	#--- FSTAB
	927	config HAVE_FSTAB
	928	bool "Use a custom fstab file"
	929	default n
	930	help
	931	#-- Select this if you have an fstab file with entries
[945ccaa]	932	# for the target system
[a705708]	933
[e5d44f5]	934	config FSTAB
	935	string "Fstab file (optional)"
	936	default "*EDIT ME*"
	937	depends on HAVE_FSTAB
	938	help
	939	#-- The location of fstab file (if empty, a template is created)
	940	#--- End FSTAB
	941
	942	#--- Kernel
	943	config CONFIG_BUILD_KERNEL
	944	bool "Build the kernel"
	945	default n
	946	help
	947	#-- Select this option if you wish to build the kernel.
	948	#
	949	# You will be prompted for the full path to the .config
	950	# file. It will be copied to the 'sources' directory and
	951	# renamed kernel-config
	952
	953	config CONFIG
	954	string "Kernel config file"
	955	default "*EDIT ME*"
	956	depends on CONFIG_BUILD_KERNEL
	957	help
	958	#-- Fully qualified path to a kernel config file
	959	# The config file will be copied to ${BUILD_DIR}/sources
	960	# and renamed 'kernel-config'
	961	#--- End Kernel
	962
[085435e]	963	config NCURSES5
	964	bool "Install non-wide-character ncurses"
[e5d44f5]	965	default n
[085435e]	966	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	967	help
[085435e]	968	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	969
	970	config TIMEZONE
	971	string "TimeZone"
	972	default "GMT"
	973	help
	974	#-- The timezone as output by tzselect
	975	# This will be copied to /etc/localtime
	976
	977	config LANG
	978	string "Language"
	979	default "$LANG"
	980	help
	981	#-- LANG variable set in /etc/profile
	982	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	983	# for values (or the file localedata/SUPPORTED in glibc tarball)
	984
	985	config FULL_LOCALE
	986	bool "Install the full set of locales"
	987	default n
	988	help
	989	#-- If set to y, the full set of supported locales
	990	# will be installed. Otherwise, only the minimal set
	991	# necessary for the tests will be installed,
	992	# together with the locale associated with the
	993	# LANG you have chosen, if not in the minimal set.
	994
	995	#--- Groff page
	996	choice
	997	prompt "Groff page size"
	998	default PAGE_LETTER
	999	help
	1000	#-- Page definition for groff: letter or A4
	1001
	1002	config PAGE_LETTER
	1003	bool "letter"
	1004
	1005	config PAGE_A4
	1006	bool "A4"
	1007	endchoice
	1008
	1009	config PAGE
	1010	string
	1011	default "letter" if PAGE_LETTER
	1012	default "A4" if PAGE_A4
	1013	#--- End Groff page
[a705708]	1014
[945ccaa]	1015	config HOSTNAME
[6990d80]	1016	string "Hostname (see help)"
[945ccaa]	1017	default "EDITME"
[6990d80]	1018	help
	1019	If you are on a public network, use the hostname given to you by
	1020	your institution, or corporation, etc. If your network is private,
	1021	that is, behind a firewall such as a box to connect to your ISP,
	1022	you can choose anything you'd like. Combined with the domain name
	1023	"local", you have the possibility to access your computer by name
	1024	instead of address on the private network (see RFC 6762 and
	1025	https://www.howtogeek.com/167190/).
[945ccaa]	1026
	1027	menu "Network configuration"
	1028	config INTERFACE
	1029	string "netword card name"
	1030	default "eth0"
[6990d80]	1031	help
	1032	eth0 is used in most cases. Virtual insterfaces may get other
	1033	names (for example enp0s3 for the default network stack in qemu).
	1034	Systemd may also rename network interfaces according to their
	1035	bus addresses.
[945ccaa]	1036	config IP_ADDR
	1037	string "Static IP address"
	1038	default "10.0.2.9"
[6990d80]	1039	help
	1040	The default here is for a virtual interface in qemu. Private
	1041	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	1042	You have to know your network prefix. Then the last figure
	1043	may be anything you like.
	1044
[945ccaa]	1045	config GATEWAY
	1046	string "Gateway"
	1047	default "10.0.2.2"
[6990d80]	1048	help
	1049	Again, this default is for a qemu network stack. Usually, the
	1050	gateway is the address of your firewall.
[945ccaa]	1051	config PREFIX
	1052	string "Subnet prefix"
	1053	default "24"
[6990d80]	1054	help
	1055	Again, this default is for a qemu network stack, but is also
	1056	the most used in private networks.
[945ccaa]	1057	config BROADCAST
	1058	string "Broadcast address"
	1059	default "10.0.2.255"
	1060	config DOMAIN
[6990d80]	1061	string "Domain name (see help)"
	1062	default "local"
	1063	help
	1064	Domain Name:
	1065	Doamin names are registered, so if your computer is on a public
	1066	network, you cannot use any name you'd like. On a public
	1067	network, you should have been given a domain name by
	1068	your corporation, institution, etc.
	1069	If your network is really private, that is behind a firewall
	1070	such as a box for connecting to an ISP, you can choose any
	1071	domain you'd like. You can also opt for "local", see RFC 6762,
	1072	or "something.test", see RFC 6761.
[945ccaa]	1073	config DNS1
	1074	string "Primary Name server"
	1075	default "10.0.2.3"
	1076	config DNS2
	1077	string "Secondary Name server"
	1078	default "8.8.8.8"
	1079	endmenu # Network configuration
	1080
	1081	menu "Console configuration"
	1082	config FONT
	1083	string "Console font"
	1084	default "lat0-16"
[3b43e17b]	1085	help
	1086	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	1087	etc, must be done manually.
[945ccaa]	1088	config KEYMAP
	1089	string "Keymap name"
	1090	default "us"
[3b43e17b]	1091	config LOCAL
	1092	boolean "Hardware clock is set to local time"
	1093	default n
	1094	help
	1095	If the harware clock is set to local time, answer yes,
	1096	If it is set to UTC, answer no
	1097	config LOG_LEVEL
	1098	string "Default log level (1-8)"
	1099	default "4"
[f596dde]	1100	depends on BOOK_LFS
[3b43e17b]	1101	help
	1102	This can be changed using dmesg. 1 means "no message",
	1103	8 shows every message sent by the kernel, which is very
	1104	noisy. The default at boot time is 7, which is quite
	1105	noisy too.
[945ccaa]	1106	endmenu # Console configuration
	1107
	1108	endmenu #--- System configuration
[a705708]	1109
[e5d44f5]	1110	menu "Advanced Features"
[e3ccc27]	1111	depends on !BOOK_BLFS
[e5d44f5]	1112
	1113	config REPORT
	1114	bool "Create SBU and disk usage report"
	1115	default y
	1116
[f5ecc28]	1117	config SAVE_CH5
	1118	bool "Save Chapter 5 work"
	1119	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	1120	default n
	1121	help
	1122	Save the state of jhalfs at the end of chapter 5:
	1123
	1124	if you tick this item, the whole $LFS directory is
	1125	saved when chapter 5 is finished. It'll be in an xz
	1126	compressed tarball in the $LFS/jhalfs directory
	1127
[f596dde]	1128	#--- ICA
[e5d44f5]	1129	config COMPARE
	1130	bool "Run comparison analysis on final stage"
[f596dde]	1131	depends on !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1132	default n
	1133	help
	1134	#-- Should an iterative comparison analysis be performed?
	1135	#
[f596dde]	1136	# Unless you are familiar with ICA, do not
[e5d44f5]	1137	# select this option
	1138	#
[f596dde]	1139	# ICA is an analysis tool for comparing one
[e5d44f5]	1140	# build to the next. Builds mays differ from one iteration
[f596dde]	1141	# to another due to the build order and this tool try
[e5d44f5]	1142	# to ferret out those differences by examining the stored
	1143	# build logs and binary files.
	1144	#
	1145	# The scripts are well commented and can be found in ./extras/*
	1146	#
	1147
	1148	config ITERATIONS
	1149	int "Number of test runs (2,3,4,5)" if COMPARE
	1150	depends on COMPARE
	1151	range 2 5
	1152	default 3
	1153
	1154	config RUN_ICA
[f596dde]	1155	bool
	1156	default y if COMPARE
[e5d44f5]	1157
[f596dde]	1158	#--- End ICA
[e5d44f5]	1159
	1160	#--- Optimizations
[0536270]	1161	if !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1162	config CONFIG_OPTIMIZE
	1163	bool "Optimization and parallelization"
	1164	default n
	1165	help
	1166	# Opens a menu for various optimization settings:
	1167	# Actual optimization flags MUST be defined in ./optimize/*
	1168	# before activating this option.
	1169	#
	1170	# WARNING: The use of build optimizations may lead to build issues.
	1171	# If the system doesn't work as expected, please rebuild
	1172	# without optimizations before asking for support.
	1173	menu "Optimization settings"
	1174	depends on CONFIG_OPTIMIZE
	1175
	1176	config N_PARALLEL
	1177	int "Number of parallel `make' jobs"
	1178	default 1
	1179	help
	1180	#-- The usual recommandation is (number of CPU cores)+1
	1181	# Do not set for meaningful SBU calculations.
	1182
	1183	choice
[f596dde]	1184	prompt "Optimization level"
[e5d44f5]	1185	default OPT_1
	1186	help
	1187	#-- Optimization values are set in optimize/* files
	1188
	1189	config OPT_1
	1190	bool "Final system only"
	1191
	1192	config OPT_2
	1193	bool "Both temp tools and final system"
	1194
	1195	config OPT_3
	1196	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
	1197	endchoice
[84a3fda]	1198
	1199	config REALSBU
	1200	bool "Build Binutls pass1 without optimization (Real SBU)"
	1201	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	1202	default n
	1203	help
	1204	#-- Use -j1 in make invokation for Binutils pass1 to
	1205	# get a valid SBU value.
	1206
[854854e]	1207	endmenu
[e5d44f5]	1208	config OPTIMIZE
	1209	int
	1210	default "0" if !CONFIG_OPTIMIZE
	1211	default "1" if OPT_1
	1212	default "2" if OPT_2
	1213	default "3" if OPT_3
[045b2dc]	1214	endif
[84a3fda]	1215
[e5d44f5]	1216	#--- End Optimizations
[a705708]	1217
[e5d44f5]	1218	#-- Internal Settings
	1219	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	1220
[e5d44f5]	1221	config SCRIPT_ROOT
	1222	string "Scripts root"
	1223	default "jhalfs"
[4da2512]	1224
[e5d44f5]	1225	config JHALFSDIR
	1226	string "jhalfs directory"
	1227	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	1228
[e5d44f5]	1229	config LOGDIRBASE
	1230	string "Build logs directory basename"
	1231	default "logs"
[93346ee]	1232
[e5d44f5]	1233	config LOGDIR
	1234	string "Build logs directory"
	1235	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	1236
[e5d44f5]	1237	config TESTLOGDIRBASE
	1238	string "Test suites logs directory basename"
	1239	default "test-logs"
[4da2512]	1240
[e5d44f5]	1241	config TESTLOGDIR
	1242	string "Test suites logs directory"
	1243	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	1244
[e5d44f5]	1245	config FILELOGDIRBASE
	1246	string "Installed files logs directory basename"
	1247	default "installed-files"
[93346ee]	1248
[e5d44f5]	1249	config FILELOGDIR
	1250	string "Installed files logs directory"
	1251	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1252
[e5d44f5]	1253	config ICALOGDIR
	1254	string "ICA logs directory"
	1255	default "$LOGDIR/ICA"
[4da2512]	1256
[e5d44f5]	1257	config MKFILE
	1258	string "Makefile"
	1259	default "$JHALFSDIR/Makefile"
[4da2512]	1260
[e5d44f5]	1261	config XSL
	1262	string "XSL stylesheet"
	1263	default "$PROGNAME.xsl"
[4da2512]	1264
[e5d44f5]	1265	config PKG_LST
	1266	string "Package contents list"
	1267	default "unpacked"
[4da2512]	1268
[e5d44f5]	1269	#--- End Internal Settings
	1270	endmenu
[4da2512]	1271
[a705708]	1272	#--- End Advanced Features
	1273	endmenu
[7b6ecc5]	1274
[a16f769]	1275	config REBUILD_MAKEFILE
[06eddf4]	1276	# depends on !BOOK_BLFS
[e5d44f5]	1277	bool "Rebuild the Makefile (see help)"
	1278	default n
	1279	help
	1280	#-- Rebuild the Makefile
	1281	#
	1282	# This option allows to rebuild the Makefile after
	1283	# customizing the base system build scripts.
	1284	#
	1285	# See README.CUSTOM for more info about this feature.
[06eddf4]	1286	# Note that you should do that after configuring a jhalfs
	1287	# build, and only if you need changing the build scripts order
	1288	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 018ab00

Download in other formats: