Context Navigation

source: Config.in@ 1242857

ablfs-more trunk

Last change on this file since 1242857 was 8825e69, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Get completely rid of PROGNAME

There is only one PROGNAME: lfs, so no need for a variable.

Property mode set to 100644

File size: 30.0 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config RUN_ME
	49	string
[e3f41e33]	50	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	51	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	52	#--- End BOOK/script
	53
	54	#--- Book version
	55	choice
[f45af2c]	56	prompt "Book version"
	57	default BRANCH
[e5d44f5]	58
[f45af2c]	59	config BRANCH
	60	bool "Branch (default to trunk) or any commit"
[e5d44f5]	61	help
[f45af2c]	62	A GIT branch, tag, or commit
[e5d44f5]	63
	64	config WORKING_COPY
	65	bool "Working Copy"
	66	help
	67	A local working copy
	68	endchoice
	69
[f45af2c]	70	config COMMIT
	71	string "Branch, tag, or any commit"
	72	default "trunk"
[f596dde]	73	depends on BRANCH
[e5d44f5]	74	help
[f45af2c]	75	Enter a branch, a tag, or an abbreviated commit sha.
	76	The tool will clone the LFS repository and checkout
	77	that commit
[e5d44f5]	78
	79	config BOOK
	80	string "Loc of working copy (mandatory)"
	81	default "EDIT ME"
[f596dde]	82	depends on WORKING_COPY
[e5d44f5]	83	help
	84	The full path to a local copy of the book XML sources
	85
[13e52a5]	86	choice
	87	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && (BRANCH \|\| WORKING_COPY)
	88	prompt "Mutilib"
	89	default LFS_MULTILIB_NO
	90	config LFS_MULTILIB_NO
	91	bool "Standard LFS on i686 or amd64"
	92	help
[b6e981a]	93	Use standard LFS book (choose this if not multilib source)
[13e52a5]	94
	95	config LFS_MULTILIB_I686
	96	bool "Multilib LFS on amd64 with i686 libraries"
	97	help
	98	Use Multilib LFS book with i686 libraries
	99
	100	config LFS_MULTILIB_X32
	101	bool "Multilib LFS on amd64 with x32 libraries"
	102	help
	103	Use Multilib LFS book with x32 libraries
	104
	105	config LFS_MULTILIB_ALL
	106	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	107	help
	108	Use Multilib LFS book with i686 and x32 libraries
	109
	110	endchoice
	111
	112	config MULTILIB
	113	string
	114	default "default" if LFS_MULTILIB_NO
	115	default "ml_32" if LFS_MULTILIB_I686
	116	default "ml_x32" if LFS_MULTILIB_X32
	117	default "ml_all" if LFS_MULTILIB_ALL
	118
[e5d44f5]	119	#--- End BOOK version
	120
	121	choice
	122	prompt "Build method"
[e3f41e33]	123	default BUILD_CHROOT
[e5d44f5]	124	help
	125	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	126	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	127	a full explanation.
	128
	129	config BUILD_CHROOT
	130	bool "chroot"
	131
	132	config BUILD_BOOT
	133	bool "boot"
	134	endchoice
	135
	136	config METHOD
	137	string
	138	default "chroot" if BUILD_CHROOT
	139	default "boot" if BUILD_BOOT
	140
	141	config BOOT_CONFIG
	142	string "BOOT kernel config file (mandatory)"
	143	default "*EDIT ME*"
	144	depends on BUILD_BOOT
	145	help
	146	If METHOD=boot, location of boot-kernel config file
	147	The config file will be copied to ${BUILD_DIR}/sources
	148	and renamed 'bootkernel-config'
	149	NOTE: this setting is required
	150
	151	#--- blfs-tool Support
	152	config BLFS_TOOL
	153	bool "Add blfs-tool support"
	154	default n
[e3f41e33]	155	depends on !BOOK_BLFS
[e5d44f5]	156	help
	157	Activating this option will install additional packages needed
	158	to use blfs tools after booting the new system.
	159	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	160	(see below).
	161	After booting the new xLFS system, but before using the blfs tools,
	162	you should create a user account, move the /blfs_root directory
	163	to that user's home, and change its ownership to that of the user.
	164	Also, be sure to give the user read and write access on the
	165	$TRACKING_DIR directory and the files that it contains.
	166	Don't forget to configure sudo properly on the new system.
	167
	168	config DUMMY # Avoid indenting the items below
	169	bool
	170
	171	if BLFS_TOOL
	172	menu "blfs-tool dependencies"
	173
	174	config DEP_LIBXML
	175	bool "libxml2 (required)"
	176	default y
	177
	178	config DEP_LIBXSLT
	179	bool "libxslt (required)"
	180	default y
	181
	182	config DEP_DBXML
	183	bool "DocBook XML DTD (required)"
	184	default y
	185
	186	config DEP_LYNX
	187	bool "lynx (optional, for reading the generated book)"
	188	default y
	189
[7f25c70]	190	config DEP_SUDO
	191	bool "sudo (recommended)"
	192	default y
	193
[e5d44f5]	194	config DEP_WGET
	195	bool "wget (recommended)"
	196	default y
	197
	198	config DEP_GPM
	199	bool "GPM (optional, see help)"
	200	default n
	201	help
	202	if you install gpm, it will be started
[90f5b6d]	203	automatically on boot. It allows copy-paste
	204	while Xorg is not installed.
[e5d44f5]	205
[1e686d1]	206	config DEP_GIT
	207	bool "GIT client (optional, see help)"
[e5d44f5]	208	default n
	209	help
[1e686d1]	210	Git is needed for updating the book
[90f5b6d]	211	sources. You do not need it if building a
	212	stable book.
[e5d44f5]	213
	214	endmenu
	215
	216	choice
	217	prompt "BLFS Release"
[1e686d1]	218	default BLFS_GIT
[e5d44f5]	219
[1e686d1]	220	config BLFS_GIT
	221	bool "BLFS GIT"
[e5d44f5]	222	help
	223	Current development version as in trunk
	224
	225	config BLFS_WORKING_COPY
	226	bool "BLFS working copy"
	227	help
	228	A local working copy of the BLFS book.
	229
	230	config BLFS_BRANCH
	231	bool "BLFS Branch or stable book"
	232	help
[1e686d1]	233	A supported GIT branch or stable (tag) book release
[e5d44f5]	234	endchoice
	235
	236	config BLFS_WC_LOCATION
	237	string "Location of the local BLFS working copy (mandatory)"
	238	default "EDIT ME"
	239	depends on BLFS_WORKING_COPY
	240	help
[506120ee]	241	Full path to the BLFS book working copy
[e5d44f5]	242
	243	config BLFS_BRANCH_ID
	244	string "BLFS Book Version (mandatory)"
	245	default "EDIT ME"
	246	depends on BLFS_BRANCH
	247	help
[f45af2c]	248	Can be any branch, tag, or abbreviated (or not) commit sha.
[e5d44f5]	249	endif
	250	#--- End blfs-tool Support
	251
	252	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	253	# or directly)
	254	config BLFS_ROOT
	255	string "Root of the tools directory (see help)"
	256	default "/blfs_root"
	257	depends on BLFS_TOOL \|\| BOOK_BLFS
	258	help
	259	Path to the directory where all required files and scripts
	260	will be stored.
	261
	262	This path must begin with a slash, and:
	263	- is relative to the user's HOME directory when installing the
	264	blfs tools on an already existing LFS system.
	265	- is relative to the root of the build directory (`/' in chroot)
	266	when adding the tools after a jhalfs run
	267
	268	CAUTION: this directory will be removed if it already exists.
	269
	270	config BLFS_XML
	271	string "BLFS sources directory (internal parameter)"
	272	default "blfs-xml"
[f596dde]	273	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	274	help
	275	The directory name under $BLFS_ROOT where the BLFS
	276	book sources will be copied or checked out. Do not change that
	277	unless you know what you are doing...
[506120ee]	278
[f733772]	279	config LFS_XML
	280	string "LFS sources directory (internal parameter)"
	281	default "lfs-xml"
[f596dde]	282	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	283	help
	284	The directory name under $BLFS_ROOT where the LFS
	285	book sources will be copied or checked out. Do not change that
	286	unless you know what you are doing...
	287
[506120ee]	288	choice
	289	prompt "LFS Release"
[1e686d1]	290	default LFS_relGIT
[f596dde]	291	depends on BOOK_BLFS
[506120ee]	292
[1e686d1]	293	config LFS_relGIT
	294	bool "LFS GIT"
[506120ee]	295	help
	296	Current development version as in trunk
	297
	298	config LFS_WORKING_COPY
	299	bool "LFS working copy"
	300	help
	301	A local working copy of the LFS book.
	302
	303	config LFS_BRANCH
	304	bool "LFS Branch or stable book"
	305	help
[1e686d1]	306	A supported GIT branch or stable (tag) book release
[506120ee]	307	endchoice
	308
	309	config BLFS_LFS_BOOK
	310	string "Location of the local LFS working copy (mandatory)"
	311	default "EDIT ME"
	312	depends on LFS_WORKING_COPY
	313	help
	314	Full path to the LFS book working copy"
	315
	316	config BLFS_LFS_BRANCH_ID
	317	string "LFS Book Version (mandatory)"
	318	default "EDIT ME"
	319	depends on LFS_BRANCH
	320	help
[f45af2c]	321	Any branch, tag or abbreviated (or not) commit sha.
[e5d44f5]	322	# End of BLFS parameters
	323
	324	#--- Custom Tools support
	325	config CUSTOM_TOOLS
[f596dde]	326	depends on !BOOK_BLFS
[e5d44f5]	327	bool "Add custom tools support"
	328	default n
	329	help
	330	Activating this option additional packages you create
	331	will be installed after finished the xLFS system build.
	332	#--- End Custom Tools support
	333
[e3ccc27]	334	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	335	# As well.
	336	config TRACKING_DIR
	337	string "Installed packages database directory"
	338	default "/var/lib/jhalfs/BLFS"
	339	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	340	help
	341	Full path to the directory where the database of
	342	installed packages will be created.
	343
	344	If the blfs tools are installed on a running xLFS system,
	345	the user must have enough privileges to create this directory.
	346	It may be necessary to create the /var/lib/jhalfs directory as
	347	root, and make it writable by the user before running this tool.
	348
	349	If you are installing the blfs tools as part of an xLFS build
	350	and/or using the customized scripts feature, you will
	351	need to fix this directory's permissions after booting
	352	the new system.
	353
[f45af2c]	354	Note that the user who will build the packages must
[e5d44f5]	355	have read and write access to this directory.
[53f291f]	356
[a705708]	357	#--- End BOOK Settings
	358	endmenu
	359
[e5d44f5]	360	menu "General Settings"
[e3ccc27]	361	depends on !BOOK_BLFS
[e5d44f5]	362
[f45af2c]	363	#--- LFS User Account
[b7583ec]	364
	365	config LUSER
[e5d44f5]	366	string
[f45af2c]	367	default "lfs"
[e5d44f5]	368
	369	config LGROUP
	370	string
[b7583ec]	371	default LUSER
[e5d44f5]	372
	373	config LHOME
	374	string
[b7583ec]	375	default "/home"
	376
[e5d44f5]	377	#--- End Set User Account
	378
	379	config BUILDDIR
	380	string "Build Directory"
	381	default "/mnt/build_dir"
	382	help
	383	#-- The directory where the created system will be located.
	384	# NOTE: A working directory named jhalfs will be created
	385	# here, so ensure this does not conflict with the jhalfs
	386	# source directory.
	387
	388	config GETPKG
	389	bool "Retrieve source files"
	390	default n
	391	help
	392	#-- Download all packages and patches required by the selected book
	393	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	394	# first and if necessary retrieves them from the 'net.
	395	# Files will be transferred to $BUILDDIR/sources.
	396
	397	config SRC_ARCHIVE
	398	string "Package Archive Directory"
	399	default "$SRC_ARCHIVE"
[f596dde]	400	depends on GETPKG
[e5d44f5]	401	help
	402	#-- A local archive for packages/files (not $BUILDDIR/sources)
	403	# Any missing file will be downloaded and archived here,
	404	# if the user has the right privileges.
	405
	406	config RETRYSRCDOWNLOAD
	407	bool "Retry on 'connection refused' failure"
	408	default n
[f596dde]	409	depends on GETPKG
[e5d44f5]	410	help
	411	#-- Attempt to download a source package again if it fails
	412	# with a 'connection refused' error. This can happen on
	413	# servers that are overloaded.
	414
	415	config RETRYDOWNLOADCNT
	416	int "Number of retry attempts on download failures"
	417	default 20
[f596dde]	418	depends on GETPKG
[e5d44f5]	419	help
	420	#-- Number of times to retry a failed download.
	421
	422	config DOWNLOADTIMEOUT
	423	int "Download timeout (in seconds)"
	424	default 30
[f596dde]	425	depends on GETPKG
[e5d44f5]	426	help
	427	#-- Number of seconds to wait for a download to start before
	428	# timing out.
	429
	430	config SERVER
	431	string "FTP mirror"
	432	default "http://ftp.osuosl.org"
[f596dde]	433	depends on GETPKG
[e5d44f5]	434	help
	435	#-- FTP mirror to download packages and patches if not found
	436	# in $SRC_ARCHIVE
	437	# As a last resort, the files will downloaded from upstream,
	438	# if possible.
	439
	440	config RUNMAKE
	441	bool "Run the makefile"
	442	default n
	443	help
	444	#-- Automatically run the makefile once it has been created
	445
	446	config CLEAN
	447	bool "Rebuild files"
	448	default n
	449	help
	450	#-- Clean the build directory before performing any other task.
	451	# The directory is cleaned only if it was populated by a
	452	# previous JHALFS run.
[a705708]	453
	454	#--- End General Settings
	455	endmenu
	456
[e5d44f5]	457	menu "Build Settings"
[e3ccc27]	458	depends on !BOOK_BLFS
[e5d44f5]	459
	460	#--- Test Suites
	461	config CONFIG_TESTS
	462	bool "Run testsuites"
	463	default y
	464	help
	465	#-- Run test suites
[1d5f3e3]	466	# If you select 'y' here:
[e5d44f5]	467	# You will have to select between:
[945ccaa]	468	# - Only critical final system testsuites
[e5d44f5]	469	# - All final system testsuites
	470	# You will be prompted also about the "flavour" of the
	471	# testsuites run:
	472	# - Don't stop on test suite failures
	473	# - Abort the build at the first test suite failure
	474	#
[1d5f3e3]	475	# Note that in any case, all the test instructions will
	476	# be generated. Those which are not wanted will be commented
	477	# out. If you select 'n' here, the commented test instructions
	478	# do not stop on test suite failures.
[e5d44f5]	479
[945ccaa]	480	menu "Test settings"
[f596dde]	481	depends on CONFIG_TESTS
[e5d44f5]	482	choice
	483	prompt "Tests level"
	484	default TST_1
	485
	486	config TST_1
[945ccaa]	487	bool "Only final system critical testsuites"
	488	help
	489	#-- Critical tests:
	490	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	491	# testsuites for final system. The others are commented
	492	# out.
[e5d44f5]	493
	494	config TST_2
	495	bool "All final system testsuites"
[1d5f3e3]	496	help
	497	#-- All final system test suites:
	498	# Test instructions for the temporary tools (if available)
	499	# are commented out.
[e5d44f5]	500
	501	endchoice
	502
	503	choice
	504	prompt "Flavour"
	505
	506	config NO_BOMB
[945ccaa]	507	bool "Don't stop on test failures"
[e5d44f5]	508
	509	config BOMB
[945ccaa]	510	bool "Abort the build on the first test failure"
[e5d44f5]	511	endchoice
	512
[30a8961]	513	endmenu # test settings
	514
[945ccaa]	515	config TEST
	516	int
	517	default "0" if !CONFIG_TESTS
	518	default "1" if TST_1
	519	default "2" if TST_2
	520
[e5d44f5]	521	config BOMB_TEST
	522	bool
	523	default n if NO_BOMB
	524	default y if BOMB
[30a8961]	525	#--- End Test Suites
[e5d44f5]	526
	527	#--- Package Management
	528	config PKGMNGT
	529	bool "Package management"
[f596dde]	530	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	531	default n
	532	help
	533	#-- Use package management
	534	#
[945ccaa]	535	# If set, you'll have to choose between
	536	# two package management styles:
	537	# - Build and install:
	538	# the packages in the final phase are built
	539	# in a separate directory, PKG_DEST.
	540	# You should provide a bash function for
[4b2a5fd]	541	# packaging and installing the package.
[945ccaa]	542	# - Preload a library before install:
	543	# Run the install instructions inside a
	544	# wrapper command, which monitors the
	545	# installed files.
	546	#
[e5d44f5]	547	# Also, you have to provide the instructions
	548	# to build the package manager during the
	549	# temporary tools phase, in the form of a
	550	# sect1 of the book identical to a package
	551	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	552	choice
[f596dde]	553	depends on PKGMNGT
[945ccaa]	554	prompt "Package management style"
	555	default PKG_PACK
	556
	557	config PKG_PACK
	558	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	559
[945ccaa]	560	config LIB_LOAD
	561	bool "Preload a library before installing (porg style)"
	562	endchoice
	563
	564	config WRAP_INSTALL
	565	bool
	566	default y if LIB_LOAD
	567	default n if PKG_PACK
[e5d44f5]	568	#--- End package management
	569
	570	#--- Installed files logs
	571	config INSTALL_LOG
	572	bool "Create a log of installed files for each package"
	573	default n
	574	help
	575	#-- Select this if you want to create logs of the files
	576	# installed by each package on the final system.
	577
	578	#--- End Installed files logs
	579
[945ccaa]	580	config STRIP
	581	bool "Strip Installed Binaries/Libraries"
	582	default n
	583
[dc7fd7b]	584	config DEL_LA_FILES
[d2a7ec8]	585	bool "Remove libtool .la files"
[dc7fd7b]	586	default y
	587	help
	588	#-- Remove files libxxx.la installed by libtool. For a rationale
	589	# see https://blog.flameeyes.eu/tags/lafiles/
	590
[945ccaa]	591	config NO_PROGRESS_BAR
[f596dde]	592	bool "DO NOT use/display progress_bar"
[945ccaa]	593	default n
	594	help
	595	#-- Do not use the progress bar routine. On slower machines
	596	# this function consumes precious CPU cycles.
	597
	598	#--- End Build Settings
	599	endmenu
	600
[6990d80]	601	menu "System configuration"
[e3ccc27]	602	depends on !BOOK_BLFS
[945ccaa]	603
[e5d44f5]	604	#--- FSTAB
	605	config HAVE_FSTAB
	606	bool "Use a custom fstab file"
	607	default n
	608	help
	609	#-- Select this if you have an fstab file with entries
[945ccaa]	610	# for the target system
[a705708]	611
[e5d44f5]	612	config FSTAB
	613	string "Fstab file (optional)"
	614	default "*EDIT ME*"
	615	depends on HAVE_FSTAB
	616	help
	617	#-- The location of fstab file (if empty, a template is created)
	618	#--- End FSTAB
	619
	620	#--- Kernel
	621	config CONFIG_BUILD_KERNEL
	622	bool "Build the kernel"
	623	default n
	624	help
	625	#-- Select this option if you wish to build the kernel.
	626	#
	627	# You will be prompted for the full path to the .config
	628	# file. It will be copied to the 'sources' directory and
	629	# renamed kernel-config
	630
	631	config CONFIG
	632	string "Kernel config file"
	633	default "*EDIT ME*"
	634	depends on CONFIG_BUILD_KERNEL
	635	help
	636	#-- Fully qualified path to a kernel config file
	637	# The config file will be copied to ${BUILD_DIR}/sources
	638	# and renamed 'kernel-config'
	639	#--- End Kernel
	640
[085435e]	641	config NCURSES5
	642	bool "Install non-wide-character ncurses"
[e5d44f5]	643	default n
[085435e]	644	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	645	help
[085435e]	646	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	647
	648	config TIMEZONE
	649	string "TimeZone"
	650	default "GMT"
	651	help
	652	#-- The timezone as output by tzselect
	653	# This will be copied to /etc/localtime
	654
	655	config LANG
	656	string "Language"
	657	default "$LANG"
	658	help
	659	#-- LANG variable set in /etc/profile
	660	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	661	# for values (or the file localedata/SUPPORTED in glibc tarball)
	662
	663	config FULL_LOCALE
	664	bool "Install the full set of locales"
	665	default n
	666	help
	667	#-- If set to y, the full set of supported locales
	668	# will be installed. Otherwise, only the minimal set
	669	# necessary for the tests will be installed,
	670	# together with the locale associated with the
	671	# LANG you have chosen, if not in the minimal set.
	672
	673	#--- Groff page
	674	choice
	675	prompt "Groff page size"
	676	default PAGE_LETTER
	677	help
	678	#-- Page definition for groff: letter or A4
	679
	680	config PAGE_LETTER
	681	bool "letter"
	682
	683	config PAGE_A4
	684	bool "A4"
	685	endchoice
	686
	687	config PAGE
	688	string
	689	default "letter" if PAGE_LETTER
	690	default "A4" if PAGE_A4
	691	#--- End Groff page
[a705708]	692
[945ccaa]	693	config HOSTNAME
[6990d80]	694	string "Hostname (see help)"
[945ccaa]	695	default "EDITME"
[6990d80]	696	help
	697	If you are on a public network, use the hostname given to you by
	698	your institution, or corporation, etc. If your network is private,
	699	that is, behind a firewall such as a box to connect to your ISP,
	700	you can choose anything you'd like. Combined with the domain name
	701	"local", you have the possibility to access your computer by name
	702	instead of address on the private network (see RFC 6762 and
	703	https://www.howtogeek.com/167190/).
[945ccaa]	704
	705	menu "Network configuration"
	706	config INTERFACE
	707	string "netword card name"
	708	default "eth0"
[6990d80]	709	help
[48700c3]	710	eth0 is used in most cases. Virtual interfaces may get other
[6990d80]	711	names (for example enp0s3 for the default network stack in qemu).
	712	Systemd may also rename network interfaces according to their
	713	bus addresses.
[945ccaa]	714	config IP_ADDR
	715	string "Static IP address"
	716	default "10.0.2.9"
[6990d80]	717	help
	718	The default here is for a virtual interface in qemu. Private
[f45af2c]	719	networks have addresses in the range 10.x.x.x or 192.168.x.x.
[6990d80]	720	You have to know your network prefix. Then the last figure
	721	may be anything you like.
	722
[945ccaa]	723	config GATEWAY
	724	string "Gateway"
	725	default "10.0.2.2"
[6990d80]	726	help
	727	Again, this default is for a qemu network stack. Usually, the
	728	gateway is the address of your firewall.
[945ccaa]	729	config PREFIX
	730	string "Subnet prefix"
	731	default "24"
[6990d80]	732	help
	733	Again, this default is for a qemu network stack, but is also
	734	the most used in private networks.
[945ccaa]	735	config BROADCAST
	736	string "Broadcast address"
	737	default "10.0.2.255"
	738	config DOMAIN
[6990d80]	739	string "Domain name (see help)"
	740	default "local"
	741	help
	742	Domain Name:
	743	Doamin names are registered, so if your computer is on a public
	744	network, you cannot use any name you'd like. On a public
	745	network, you should have been given a domain name by
	746	your corporation, institution, etc.
	747	If your network is really private, that is behind a firewall
	748	such as a box for connecting to an ISP, you can choose any
	749	domain you'd like. You can also opt for "local", see RFC 6762,
	750	or "something.test", see RFC 6761.
[945ccaa]	751	config DNS1
	752	string "Primary Name server"
	753	default "10.0.2.3"
	754	config DNS2
	755	string "Secondary Name server"
	756	default "8.8.8.8"
	757	endmenu # Network configuration
	758
	759	menu "Console configuration"
	760	config FONT
	761	string "Console font"
	762	default "lat0-16"
[3b43e17b]	763	help
	764	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	765	etc, must be done manually.
[945ccaa]	766	config KEYMAP
	767	string "Keymap name"
	768	default "us"
[3b43e17b]	769	config LOCAL
	770	boolean "Hardware clock is set to local time"
	771	default n
	772	help
	773	If the harware clock is set to local time, answer yes,
	774	If it is set to UTC, answer no
	775	config LOG_LEVEL
	776	string "Default log level (1-8)"
	777	default "4"
[f596dde]	778	depends on BOOK_LFS
[3b43e17b]	779	help
	780	This can be changed using dmesg. 1 means "no message",
	781	8 shows every message sent by the kernel, which is very
	782	noisy. The default at boot time is 7, which is quite
	783	noisy too.
[945ccaa]	784	endmenu # Console configuration
	785
	786	endmenu #--- System configuration
[a705708]	787
[e5d44f5]	788	menu "Advanced Features"
[e3ccc27]	789	depends on !BOOK_BLFS
[e5d44f5]	790
	791	config REPORT
	792	bool "Create SBU and disk usage report"
	793	default y
	794
[f5ecc28]	795	config SAVE_CH5
	796	bool "Save Chapter 5 work"
	797	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	798	default n
	799	help
	800	Save the state of jhalfs at the end of chapter 5:
	801
	802	if you tick this item, the whole $LFS directory is
	803	saved when chapter 5 is finished. It'll be in an xz
	804	compressed tarball in the $LFS/jhalfs directory
	805
[f596dde]	806	#--- ICA
[e5d44f5]	807	config COMPARE
	808	bool "Run comparison analysis on final stage"
	809	default n
	810	help
	811	#-- Should an iterative comparison analysis be performed?
	812	#
[f596dde]	813	# Unless you are familiar with ICA, do not
[e5d44f5]	814	# select this option
	815	#
[f596dde]	816	# ICA is an analysis tool for comparing one
[e5d44f5]	817	# build to the next. Builds mays differ from one iteration
[f596dde]	818	# to another due to the build order and this tool try
[e5d44f5]	819	# to ferret out those differences by examining the stored
	820	# build logs and binary files.
	821	#
	822	# The scripts are well commented and can be found in ./extras/*
	823	#
	824
	825	config ITERATIONS
	826	int "Number of test runs (2,3,4,5)" if COMPARE
	827	depends on COMPARE
	828	range 2 5
	829	default 3
	830
	831	config RUN_ICA
[f596dde]	832	bool
	833	default y if COMPARE
[e5d44f5]	834
[f596dde]	835	#--- End ICA
[e5d44f5]	836
	837	#--- Optimizations
	838	config CONFIG_OPTIMIZE
	839	bool "Optimization and parallelization"
	840	default n
	841	help
	842	# Opens a menu for various optimization settings:
	843	# Actual optimization flags MUST be defined in ./optimize/*
	844	# before activating this option.
	845	#
	846	# WARNING: The use of build optimizations may lead to build issues.
	847	# If the system doesn't work as expected, please rebuild
	848	# without optimizations before asking for support.
	849	menu "Optimization settings"
	850	depends on CONFIG_OPTIMIZE
	851
	852	config N_PARALLEL
	853	int "Number of parallel `make' jobs"
	854	default 1
	855	help
	856	#-- The usual recommandation is (number of CPU cores)+1
	857	# Do not set for meaningful SBU calculations.
	858
	859	choice
[f596dde]	860	prompt "Optimization level"
[e5d44f5]	861	default OPT_1
	862	help
	863	#-- Optimization values are set in optimize/* files
	864
	865	config OPT_1
	866	bool "Final system only"
	867
	868	config OPT_2
	869	bool "Both temp tools and final system"
	870
	871	endchoice
[84a3fda]	872
	873	config REALSBU
	874	bool "Build Binutls pass1 without optimization (Real SBU)"
[f45af2c]	875	depends on OPT_2
[84a3fda]	876	default n
	877	help
	878	#-- Use -j1 in make invokation for Binutils pass1 to
	879	# get a valid SBU value.
	880
[9d665db]	881	endmenu # Optimization settings
[e5d44f5]	882	config OPTIMIZE
	883	int
	884	default "0" if !CONFIG_OPTIMIZE
	885	default "1" if OPT_1
	886	default "2" if OPT_2
[84a3fda]	887
[e5d44f5]	888	#--- End Optimizations
[a705708]	889
[e5d44f5]	890	#-- Internal Settings
	891	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	892
[e5d44f5]	893	config SCRIPT_ROOT
	894	string "Scripts root"
	895	default "jhalfs"
[4da2512]	896
[e5d44f5]	897	config JHALFSDIR
	898	string "jhalfs directory"
	899	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	900
[e5d44f5]	901	config LOGDIRBASE
	902	string "Build logs directory basename"
	903	default "logs"
[93346ee]	904
[e5d44f5]	905	config LOGDIR
	906	string "Build logs directory"
	907	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	908
[e5d44f5]	909	config TESTLOGDIRBASE
	910	string "Test suites logs directory basename"
	911	default "test-logs"
[4da2512]	912
[e5d44f5]	913	config TESTLOGDIR
	914	string "Test suites logs directory"
	915	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	916
[e5d44f5]	917	config FILELOGDIRBASE
	918	string "Installed files logs directory basename"
	919	default "installed-files"
[93346ee]	920
[e5d44f5]	921	config FILELOGDIR
	922	string "Installed files logs directory"
	923	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	924
[e5d44f5]	925	config ICALOGDIR
	926	string "ICA logs directory"
	927	default "$LOGDIR/ICA"
[4da2512]	928
[e5d44f5]	929	config MKFILE
	930	string "Makefile"
	931	default "$JHALFSDIR/Makefile"
[4da2512]	932
[e5d44f5]	933	config XSL
	934	string "XSL stylesheet"
[8825e69]	935	default "lfs.xsl"
[4da2512]	936
[e5d44f5]	937	config PKG_LST
	938	string "Package contents list"
	939	default "unpacked"
[4da2512]	940
[e5d44f5]	941	#--- End Internal Settings
	942	endmenu
[4da2512]	943
[a705708]	944	#--- End Advanced Features
	945	endmenu
[7b6ecc5]	946
[a16f769]	947	config REBUILD_MAKEFILE
[06eddf4]	948	# depends on !BOOK_BLFS
[e5d44f5]	949	bool "Rebuild the Makefile (see help)"
	950	default n
	951	help
	952	#-- Rebuild the Makefile
	953	#
	954	# This option allows to rebuild the Makefile after
	955	# customizing the base system build scripts.
	956	#
	957	# See README.CUSTOM for more info about this feature.
[06eddf4]	958	# Note that you should do that after configuring a jhalfs
	959	# build, and only if you need changing the build scripts order
	960	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 1242857

Download in other formats: