Context Navigation

source: Config.in@ 30a444a

ablfs-more trunk

Last change on this file since 30a444a was a2917ed, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Try to clarify help in Config.in

Also prevent the chroot/boot method to be prompted for the blfs
book

Property mode set to 100644

File size: 30.2 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config RUN_ME
	49	string
[e3f41e33]	50	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	51	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	52	#--- End BOOK/script
	53
	54	#--- Book version
	55	choice
[f45af2c]	56	prompt "Book version"
	57	default BRANCH
[e5d44f5]	58
[f45af2c]	59	config BRANCH
	60	bool "Branch (default to trunk) or any commit"
[e5d44f5]	61	help
[a2917ed]	62	Use an LFS book downloaded from the git repository, and
	63	checked out at any commit (branch/tag/sha)
[e5d44f5]	64
	65	config WORKING_COPY
	66	bool "Working Copy"
	67	help
[a2917ed]	68	Use a local working copy of the LFS book
[e5d44f5]	69	endchoice
	70
[f45af2c]	71	config COMMIT
	72	string "Branch, tag, or any commit"
	73	default "trunk"
[f596dde]	74	depends on BRANCH
[e5d44f5]	75	help
[f45af2c]	76	Enter a branch, a tag, or an abbreviated commit sha.
	77	The tool will clone the LFS repository and checkout
	78	that commit
[e5d44f5]	79
	80	config BOOK
	81	string "Loc of working copy (mandatory)"
	82	default "EDIT ME"
[f596dde]	83	depends on WORKING_COPY
[e5d44f5]	84	help
[a2917ed]	85	The full path to a local copy of the LFS book XML sources
[e5d44f5]	86
[13e52a5]	87	choice
[a2917ed]	88	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[13e52a5]	89	prompt "Mutilib"
	90	default LFS_MULTILIB_NO
	91	config LFS_MULTILIB_NO
	92	bool "Standard LFS on i686 or amd64"
	93	help
[b6e981a]	94	Use standard LFS book (choose this if not multilib source)
[13e52a5]	95
	96	config LFS_MULTILIB_I686
	97	bool "Multilib LFS on amd64 with i686 libraries"
	98	help
	99	Use Multilib LFS book with i686 libraries
	100
	101	config LFS_MULTILIB_X32
	102	bool "Multilib LFS on amd64 with x32 libraries"
	103	help
	104	Use Multilib LFS book with x32 libraries
	105
	106	config LFS_MULTILIB_ALL
	107	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	108	help
	109	Use Multilib LFS book with i686 and x32 libraries
	110
	111	endchoice
	112
	113	config MULTILIB
	114	string
	115	default "default" if LFS_MULTILIB_NO
	116	default "ml_32" if LFS_MULTILIB_I686
	117	default "ml_x32" if LFS_MULTILIB_X32
	118	default "ml_all" if LFS_MULTILIB_ALL
	119
[e5d44f5]	120	#--- End BOOK version
	121
	122	choice
	123	prompt "Build method"
[e3f41e33]	124	default BUILD_CHROOT
[a2917ed]	125	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[e5d44f5]	126	help
	127	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	128	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	129	a full explanation.
	130
	131	config BUILD_CHROOT
	132	bool "chroot"
	133
	134	config BUILD_BOOT
	135	bool "boot"
	136	endchoice
	137
	138	config METHOD
	139	string
	140	default "chroot" if BUILD_CHROOT
	141	default "boot" if BUILD_BOOT
	142
	143	config BOOT_CONFIG
	144	string "BOOT kernel config file (mandatory)"
	145	default "*EDIT ME*"
	146	depends on BUILD_BOOT
	147	help
	148	If METHOD=boot, location of boot-kernel config file
	149	The config file will be copied to ${BUILD_DIR}/sources
	150	and renamed 'bootkernel-config'
	151	NOTE: this setting is required
	152
	153	#--- blfs-tool Support
	154	config BLFS_TOOL
	155	bool "Add blfs-tool support"
	156	default n
[e3f41e33]	157	depends on !BOOK_BLFS
[e5d44f5]	158	help
	159	Activating this option will install additional packages needed
	160	to use blfs tools after booting the new system.
	161	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	162	(see below).
	163	After booting the new xLFS system, but before using the blfs tools,
	164	you should create a user account, move the /blfs_root directory
	165	to that user's home, and change its ownership to that of the user.
	166	Also, be sure to give the user read and write access on the
	167	$TRACKING_DIR directory and the files that it contains.
	168	Don't forget to configure sudo properly on the new system.
	169
	170	config DUMMY # Avoid indenting the items below
	171	bool
	172
	173	if BLFS_TOOL
	174	menu "blfs-tool dependencies"
	175
	176	config DEP_LIBXML
	177	bool "libxml2 (required)"
	178	default y
	179
	180	config DEP_LIBXSLT
	181	bool "libxslt (required)"
	182	default y
	183
	184	config DEP_DBXML
	185	bool "DocBook XML DTD (required)"
	186	default y
	187
	188	config DEP_LYNX
	189	bool "lynx (optional, for reading the generated book)"
	190	default y
	191
[7f25c70]	192	config DEP_SUDO
	193	bool "sudo (recommended)"
	194	default y
	195
[e5d44f5]	196	config DEP_WGET
	197	bool "wget (recommended)"
	198	default y
	199
	200	config DEP_GPM
	201	bool "GPM (optional, see help)"
	202	default n
	203	help
	204	if you install gpm, it will be started
[90f5b6d]	205	automatically on boot. It allows copy-paste
	206	while Xorg is not installed.
[e5d44f5]	207
[1e686d1]	208	config DEP_GIT
	209	bool "GIT client (optional, see help)"
[e5d44f5]	210	default n
	211	help
[1e686d1]	212	Git is needed for updating the book
[90f5b6d]	213	sources. You do not need it if building a
	214	stable book.
[e5d44f5]	215
	216	endmenu
	217
	218	choice
	219	prompt "BLFS Release"
[1e686d1]	220	default BLFS_GIT
[e5d44f5]	221
[1e686d1]	222	config BLFS_GIT
	223	bool "BLFS GIT"
[e5d44f5]	224	help
	225	Current development version as in trunk
	226
	227	config BLFS_WORKING_COPY
	228	bool "BLFS working copy"
	229	help
	230	A local working copy of the BLFS book.
	231
	232	config BLFS_BRANCH
	233	bool "BLFS Branch or stable book"
	234	help
[1e686d1]	235	A supported GIT branch or stable (tag) book release
[e5d44f5]	236	endchoice
	237
	238	config BLFS_WC_LOCATION
	239	string "Location of the local BLFS working copy (mandatory)"
	240	default "EDIT ME"
	241	depends on BLFS_WORKING_COPY
	242	help
[506120ee]	243	Full path to the BLFS book working copy
[e5d44f5]	244
	245	config BLFS_BRANCH_ID
	246	string "BLFS Book Version (mandatory)"
	247	default "EDIT ME"
	248	depends on BLFS_BRANCH
	249	help
[f45af2c]	250	Can be any branch, tag, or abbreviated (or not) commit sha.
[e5d44f5]	251	endif
	252	#--- End blfs-tool Support
	253
	254	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	255	# or directly)
	256	config BLFS_ROOT
	257	string "Root of the tools directory (see help)"
	258	default "/blfs_root"
	259	depends on BLFS_TOOL \|\| BOOK_BLFS
	260	help
	261	Path to the directory where all required files and scripts
	262	will be stored.
	263
	264	This path must begin with a slash, and:
	265	- is relative to the user's HOME directory when installing the
	266	blfs tools on an already existing LFS system.
	267	- is relative to the root of the build directory (`/' in chroot)
	268	when adding the tools after a jhalfs run
	269
	270	CAUTION: this directory will be removed if it already exists.
	271
	272	config BLFS_XML
	273	string "BLFS sources directory (internal parameter)"
	274	default "blfs-xml"
[f596dde]	275	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	276	help
	277	The directory name under $BLFS_ROOT where the BLFS
	278	book sources will be copied or checked out. Do not change that
	279	unless you know what you are doing...
[506120ee]	280
[f733772]	281	config LFS_XML
	282	string "LFS sources directory (internal parameter)"
	283	default "lfs-xml"
[f596dde]	284	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	285	help
	286	The directory name under $BLFS_ROOT where the LFS
	287	book sources will be copied or checked out. Do not change that
	288	unless you know what you are doing...
	289
[506120ee]	290	choice
	291	prompt "LFS Release"
[1e686d1]	292	default LFS_relGIT
[f596dde]	293	depends on BOOK_BLFS
[506120ee]	294
[1e686d1]	295	config LFS_relGIT
	296	bool "LFS GIT"
[506120ee]	297	help
	298	Current development version as in trunk
	299
	300	config LFS_WORKING_COPY
	301	bool "LFS working copy"
	302	help
	303	A local working copy of the LFS book.
	304
	305	config LFS_BRANCH
	306	bool "LFS Branch or stable book"
	307	help
[1e686d1]	308	A supported GIT branch or stable (tag) book release
[506120ee]	309	endchoice
	310
	311	config BLFS_LFS_BOOK
	312	string "Location of the local LFS working copy (mandatory)"
	313	default "EDIT ME"
	314	depends on LFS_WORKING_COPY
	315	help
	316	Full path to the LFS book working copy"
	317
	318	config BLFS_LFS_BRANCH_ID
	319	string "LFS Book Version (mandatory)"
	320	default "EDIT ME"
	321	depends on LFS_BRANCH
	322	help
[f45af2c]	323	Any branch, tag or abbreviated (or not) commit sha.
[e5d44f5]	324	# End of BLFS parameters
	325
	326	#--- Custom Tools support
	327	config CUSTOM_TOOLS
[f596dde]	328	depends on !BOOK_BLFS
[e5d44f5]	329	bool "Add custom tools support"
	330	default n
	331	help
	332	Activating this option additional packages you create
	333	will be installed after finished the xLFS system build.
	334	#--- End Custom Tools support
	335
[e3ccc27]	336	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	337	# As well.
	338	config TRACKING_DIR
	339	string "Installed packages database directory"
	340	default "/var/lib/jhalfs/BLFS"
	341	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	342	help
	343	Full path to the directory where the database of
	344	installed packages will be created.
	345
	346	If the blfs tools are installed on a running xLFS system,
	347	the user must have enough privileges to create this directory.
	348	It may be necessary to create the /var/lib/jhalfs directory as
	349	root, and make it writable by the user before running this tool.
	350
	351	If you are installing the blfs tools as part of an xLFS build
	352	and/or using the customized scripts feature, you will
	353	need to fix this directory's permissions after booting
	354	the new system.
	355
[f45af2c]	356	Note that the user who will build the packages must
[e5d44f5]	357	have read and write access to this directory.
[53f291f]	358
[a705708]	359	#--- End BOOK Settings
	360	endmenu
	361
[e5d44f5]	362	menu "General Settings"
[e3ccc27]	363	depends on !BOOK_BLFS
[e5d44f5]	364
[f45af2c]	365	#--- LFS User Account
[b7583ec]	366
	367	config LUSER
[e5d44f5]	368	string
[f45af2c]	369	default "lfs"
[e5d44f5]	370
	371	config LGROUP
	372	string
[b7583ec]	373	default LUSER
[e5d44f5]	374
	375	config LHOME
	376	string
[b7583ec]	377	default "/home"
	378
[e5d44f5]	379	#--- End Set User Account
	380
	381	config BUILDDIR
	382	string "Build Directory"
	383	default "/mnt/build_dir"
	384	help
	385	#-- The directory where the created system will be located.
	386	# NOTE: A working directory named jhalfs will be created
	387	# here, so ensure this does not conflict with the jhalfs
	388	# source directory.
	389
	390	config GETPKG
	391	bool "Retrieve source files"
	392	default n
	393	help
	394	#-- Download all packages and patches required by the selected book
	395	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	396	# first and if necessary retrieves them from the 'net.
	397	# Files will be transferred to $BUILDDIR/sources.
	398
	399	config SRC_ARCHIVE
	400	string "Package Archive Directory"
	401	default "$SRC_ARCHIVE"
[f596dde]	402	depends on GETPKG
[e5d44f5]	403	help
	404	#-- A local archive for packages/files (not $BUILDDIR/sources)
	405	# Any missing file will be downloaded and archived here,
	406	# if the user has the right privileges.
	407
	408	config RETRYSRCDOWNLOAD
	409	bool "Retry on 'connection refused' failure"
	410	default n
[f596dde]	411	depends on GETPKG
[e5d44f5]	412	help
	413	#-- Attempt to download a source package again if it fails
	414	# with a 'connection refused' error. This can happen on
	415	# servers that are overloaded.
	416
	417	config RETRYDOWNLOADCNT
	418	int "Number of retry attempts on download failures"
	419	default 20
[f596dde]	420	depends on GETPKG
[e5d44f5]	421	help
	422	#-- Number of times to retry a failed download.
	423
	424	config DOWNLOADTIMEOUT
	425	int "Download timeout (in seconds)"
	426	default 30
[f596dde]	427	depends on GETPKG
[e5d44f5]	428	help
	429	#-- Number of seconds to wait for a download to start before
	430	# timing out.
	431
	432	config SERVER
	433	string "FTP mirror"
	434	default "http://ftp.osuosl.org"
[f596dde]	435	depends on GETPKG
[e5d44f5]	436	help
	437	#-- FTP mirror to download packages and patches if not found
	438	# in $SRC_ARCHIVE
	439	# As a last resort, the files will downloaded from upstream,
	440	# if possible.
	441
	442	config RUNMAKE
	443	bool "Run the makefile"
	444	default n
	445	help
	446	#-- Automatically run the makefile once it has been created
	447
	448	config CLEAN
	449	bool "Rebuild files"
	450	default n
	451	help
	452	#-- Clean the build directory before performing any other task.
	453	# The directory is cleaned only if it was populated by a
	454	# previous JHALFS run.
[a705708]	455
	456	#--- End General Settings
	457	endmenu
	458
[e5d44f5]	459	menu "Build Settings"
[e3ccc27]	460	depends on !BOOK_BLFS
[e5d44f5]	461
	462	#--- Test Suites
	463	config CONFIG_TESTS
	464	bool "Run testsuites"
	465	default y
	466	help
	467	#-- Run test suites
[1d5f3e3]	468	# If you select 'y' here:
[e5d44f5]	469	# You will have to select between:
[945ccaa]	470	# - Only critical final system testsuites
[e5d44f5]	471	# - All final system testsuites
	472	# You will be prompted also about the "flavour" of the
	473	# testsuites run:
	474	# - Don't stop on test suite failures
	475	# - Abort the build at the first test suite failure
	476	#
[1d5f3e3]	477	# Note that in any case, all the test instructions will
	478	# be generated. Those which are not wanted will be commented
	479	# out. If you select 'n' here, the commented test instructions
	480	# do not stop on test suite failures.
[e5d44f5]	481
[945ccaa]	482	menu "Test settings"
[f596dde]	483	depends on CONFIG_TESTS
[e5d44f5]	484	choice
	485	prompt "Tests level"
	486	default TST_1
	487
	488	config TST_1
[945ccaa]	489	bool "Only final system critical testsuites"
	490	help
	491	#-- Critical tests:
	492	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	493	# testsuites for final system. The others are commented
	494	# out.
[e5d44f5]	495
	496	config TST_2
	497	bool "All final system testsuites"
[1d5f3e3]	498	help
	499	#-- All final system test suites:
	500	# Test instructions for the temporary tools (if available)
	501	# are commented out.
[e5d44f5]	502
	503	endchoice
	504
	505	choice
	506	prompt "Flavour"
	507
	508	config NO_BOMB
[945ccaa]	509	bool "Don't stop on test failures"
[e5d44f5]	510
	511	config BOMB
[945ccaa]	512	bool "Abort the build on the first test failure"
[e5d44f5]	513	endchoice
	514
[30a8961]	515	endmenu # test settings
	516
[945ccaa]	517	config TEST
	518	int
	519	default "0" if !CONFIG_TESTS
	520	default "1" if TST_1
	521	default "2" if TST_2
	522
[e5d44f5]	523	config BOMB_TEST
	524	bool
	525	default n if NO_BOMB
	526	default y if BOMB
[30a8961]	527	#--- End Test Suites
[e5d44f5]	528
	529	#--- Package Management
	530	config PKGMNGT
	531	bool "Package management"
[f596dde]	532	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	533	default n
	534	help
	535	#-- Use package management
	536	#
[945ccaa]	537	# If set, you'll have to choose between
	538	# two package management styles:
	539	# - Build and install:
	540	# the packages in the final phase are built
	541	# in a separate directory, PKG_DEST.
	542	# You should provide a bash function for
[4b2a5fd]	543	# packaging and installing the package.
[945ccaa]	544	# - Preload a library before install:
	545	# Run the install instructions inside a
	546	# wrapper command, which monitors the
	547	# installed files.
	548	#
[e5d44f5]	549	# Also, you have to provide the instructions
	550	# to build the package manager during the
	551	# temporary tools phase, in the form of a
	552	# sect1 of the book identical to a package
	553	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	554	choice
[f596dde]	555	depends on PKGMNGT
[945ccaa]	556	prompt "Package management style"
	557	default PKG_PACK
	558
	559	config PKG_PACK
	560	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	561
[945ccaa]	562	config LIB_LOAD
	563	bool "Preload a library before installing (porg style)"
	564	endchoice
	565
	566	config WRAP_INSTALL
	567	bool
	568	default y if LIB_LOAD
	569	default n if PKG_PACK
[e5d44f5]	570	#--- End package management
	571
	572	#--- Installed files logs
	573	config INSTALL_LOG
	574	bool "Create a log of installed files for each package"
	575	default n
	576	help
	577	#-- Select this if you want to create logs of the files
	578	# installed by each package on the final system.
	579
	580	#--- End Installed files logs
	581
[945ccaa]	582	config STRIP
	583	bool "Strip Installed Binaries/Libraries"
	584	default n
	585
[dc7fd7b]	586	config DEL_LA_FILES
[d2a7ec8]	587	bool "Remove libtool .la files"
[dc7fd7b]	588	default y
	589	help
	590	#-- Remove files libxxx.la installed by libtool. For a rationale
	591	# see https://blog.flameeyes.eu/tags/lafiles/
	592
[945ccaa]	593	config NO_PROGRESS_BAR
[f596dde]	594	bool "DO NOT use/display progress_bar"
[945ccaa]	595	default n
	596	help
	597	#-- Do not use the progress bar routine. On slower machines
	598	# this function consumes precious CPU cycles.
	599
	600	#--- End Build Settings
	601	endmenu
	602
[6990d80]	603	menu "System configuration"
[e3ccc27]	604	depends on !BOOK_BLFS
[945ccaa]	605
[e5d44f5]	606	#--- FSTAB
	607	config HAVE_FSTAB
	608	bool "Use a custom fstab file"
	609	default n
	610	help
	611	#-- Select this if you have an fstab file with entries
[945ccaa]	612	# for the target system
[a705708]	613
[e5d44f5]	614	config FSTAB
	615	string "Fstab file (optional)"
	616	default "*EDIT ME*"
	617	depends on HAVE_FSTAB
	618	help
	619	#-- The location of fstab file (if empty, a template is created)
	620	#--- End FSTAB
	621
	622	#--- Kernel
	623	config CONFIG_BUILD_KERNEL
	624	bool "Build the kernel"
	625	default n
	626	help
	627	#-- Select this option if you wish to build the kernel.
	628	#
	629	# You will be prompted for the full path to the .config
	630	# file. It will be copied to the 'sources' directory and
	631	# renamed kernel-config
	632
	633	config CONFIG
	634	string "Kernel config file"
	635	default "*EDIT ME*"
	636	depends on CONFIG_BUILD_KERNEL
	637	help
	638	#-- Fully qualified path to a kernel config file
	639	# The config file will be copied to ${BUILD_DIR}/sources
	640	# and renamed 'kernel-config'
	641	#--- End Kernel
	642
[085435e]	643	config NCURSES5
	644	bool "Install non-wide-character ncurses"
[e5d44f5]	645	default n
[085435e]	646	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	647	help
[085435e]	648	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	649
	650	config TIMEZONE
	651	string "TimeZone"
	652	default "GMT"
	653	help
	654	#-- The timezone as output by tzselect
	655	# This will be copied to /etc/localtime
	656
	657	config LANG
	658	string "Language"
	659	default "$LANG"
	660	help
	661	#-- LANG variable set in /etc/profile
	662	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	663	# for values (or the file localedata/SUPPORTED in glibc tarball)
	664
	665	config FULL_LOCALE
	666	bool "Install the full set of locales"
	667	default n
	668	help
	669	#-- If set to y, the full set of supported locales
	670	# will be installed. Otherwise, only the minimal set
	671	# necessary for the tests will be installed,
	672	# together with the locale associated with the
	673	# LANG you have chosen, if not in the minimal set.
	674
	675	#--- Groff page
	676	choice
	677	prompt "Groff page size"
	678	default PAGE_LETTER
	679	help
	680	#-- Page definition for groff: letter or A4
	681
	682	config PAGE_LETTER
	683	bool "letter"
	684
	685	config PAGE_A4
	686	bool "A4"
	687	endchoice
	688
	689	config PAGE
	690	string
	691	default "letter" if PAGE_LETTER
	692	default "A4" if PAGE_A4
	693	#--- End Groff page
[a705708]	694
[945ccaa]	695	config HOSTNAME
[6990d80]	696	string "Hostname (see help)"
[945ccaa]	697	default "EDITME"
[6990d80]	698	help
	699	If you are on a public network, use the hostname given to you by
	700	your institution, or corporation, etc. If your network is private,
	701	that is, behind a firewall such as a box to connect to your ISP,
	702	you can choose anything you'd like. Combined with the domain name
	703	"local", you have the possibility to access your computer by name
	704	instead of address on the private network (see RFC 6762 and
	705	https://www.howtogeek.com/167190/).
[945ccaa]	706
	707	menu "Network configuration"
	708	config INTERFACE
	709	string "netword card name"
	710	default "eth0"
[6990d80]	711	help
[48700c3]	712	eth0 is used in most cases. Virtual interfaces may get other
[6990d80]	713	names (for example enp0s3 for the default network stack in qemu).
	714	Systemd may also rename network interfaces according to their
	715	bus addresses.
[945ccaa]	716	config IP_ADDR
	717	string "Static IP address"
	718	default "10.0.2.9"
[6990d80]	719	help
	720	The default here is for a virtual interface in qemu. Private
[f45af2c]	721	networks have addresses in the range 10.x.x.x or 192.168.x.x.
[6990d80]	722	You have to know your network prefix. Then the last figure
	723	may be anything you like.
	724
[945ccaa]	725	config GATEWAY
	726	string "Gateway"
	727	default "10.0.2.2"
[6990d80]	728	help
	729	Again, this default is for a qemu network stack. Usually, the
	730	gateway is the address of your firewall.
[945ccaa]	731	config PREFIX
	732	string "Subnet prefix"
	733	default "24"
[6990d80]	734	help
	735	Again, this default is for a qemu network stack, but is also
	736	the most used in private networks.
[945ccaa]	737	config BROADCAST
	738	string "Broadcast address"
	739	default "10.0.2.255"
	740	config DOMAIN
[6990d80]	741	string "Domain name (see help)"
	742	default "local"
	743	help
	744	Domain Name:
	745	Doamin names are registered, so if your computer is on a public
	746	network, you cannot use any name you'd like. On a public
	747	network, you should have been given a domain name by
	748	your corporation, institution, etc.
	749	If your network is really private, that is behind a firewall
	750	such as a box for connecting to an ISP, you can choose any
	751	domain you'd like. You can also opt for "local", see RFC 6762,
	752	or "something.test", see RFC 6761.
[945ccaa]	753	config DNS1
	754	string "Primary Name server"
	755	default "10.0.2.3"
	756	config DNS2
	757	string "Secondary Name server"
	758	default "8.8.8.8"
	759	endmenu # Network configuration
	760
	761	menu "Console configuration"
	762	config FONT
	763	string "Console font"
	764	default "lat0-16"
[3b43e17b]	765	help
	766	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	767	etc, must be done manually.
[945ccaa]	768	config KEYMAP
	769	string "Keymap name"
	770	default "us"
[3b43e17b]	771	config LOCAL
	772	boolean "Hardware clock is set to local time"
	773	default n
	774	help
	775	If the harware clock is set to local time, answer yes,
	776	If it is set to UTC, answer no
	777	config LOG_LEVEL
	778	string "Default log level (1-8)"
	779	default "4"
[f596dde]	780	depends on BOOK_LFS
[3b43e17b]	781	help
	782	This can be changed using dmesg. 1 means "no message",
	783	8 shows every message sent by the kernel, which is very
	784	noisy. The default at boot time is 7, which is quite
	785	noisy too.
[945ccaa]	786	endmenu # Console configuration
	787
	788	endmenu #--- System configuration
[a705708]	789
[e5d44f5]	790	menu "Advanced Features"
[e3ccc27]	791	depends on !BOOK_BLFS
[e5d44f5]	792
	793	config REPORT
	794	bool "Create SBU and disk usage report"
	795	default y
	796
[f5ecc28]	797	config SAVE_CH5
	798	bool "Save Chapter 5 work"
	799	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	800	default n
	801	help
	802	Save the state of jhalfs at the end of chapter 5:
	803
	804	if you tick this item, the whole $LFS directory is
	805	saved when chapter 5 is finished. It'll be in an xz
	806	compressed tarball in the $LFS/jhalfs directory
	807
[f596dde]	808	#--- ICA
[e5d44f5]	809	config COMPARE
	810	bool "Run comparison analysis on final stage"
	811	default n
	812	help
	813	#-- Should an iterative comparison analysis be performed?
	814	#
[f596dde]	815	# Unless you are familiar with ICA, do not
[e5d44f5]	816	# select this option
	817	#
[f596dde]	818	# ICA is an analysis tool for comparing one
[e5d44f5]	819	# build to the next. Builds mays differ from one iteration
[f596dde]	820	# to another due to the build order and this tool try
[e5d44f5]	821	# to ferret out those differences by examining the stored
	822	# build logs and binary files.
	823	#
	824	# The scripts are well commented and can be found in ./extras/*
	825	#
	826
	827	config ITERATIONS
	828	int "Number of test runs (2,3,4,5)" if COMPARE
	829	depends on COMPARE
	830	range 2 5
	831	default 3
	832
	833	config RUN_ICA
[f596dde]	834	bool
	835	default y if COMPARE
[e5d44f5]	836
[f596dde]	837	#--- End ICA
[e5d44f5]	838
	839	#--- Optimizations
	840	config CONFIG_OPTIMIZE
	841	bool "Optimization and parallelization"
	842	default n
	843	help
	844	# Opens a menu for various optimization settings:
	845	# Actual optimization flags MUST be defined in ./optimize/*
	846	# before activating this option.
	847	#
	848	# WARNING: The use of build optimizations may lead to build issues.
	849	# If the system doesn't work as expected, please rebuild
	850	# without optimizations before asking for support.
	851	menu "Optimization settings"
	852	depends on CONFIG_OPTIMIZE
	853
	854	config N_PARALLEL
	855	int "Number of parallel `make' jobs"
	856	default 1
	857	help
	858	#-- The usual recommandation is (number of CPU cores)+1
	859	# Do not set for meaningful SBU calculations.
	860
	861	choice
[f596dde]	862	prompt "Optimization level"
[e5d44f5]	863	default OPT_1
	864	help
	865	#-- Optimization values are set in optimize/* files
	866
	867	config OPT_1
	868	bool "Final system only"
	869
	870	config OPT_2
	871	bool "Both temp tools and final system"
	872
	873	endchoice
[84a3fda]	874
	875	config REALSBU
	876	bool "Build Binutls pass1 without optimization (Real SBU)"
[f45af2c]	877	depends on OPT_2
[84a3fda]	878	default n
	879	help
	880	#-- Use -j1 in make invokation for Binutils pass1 to
	881	# get a valid SBU value.
	882
[9d665db]	883	endmenu # Optimization settings
[e5d44f5]	884	config OPTIMIZE
	885	int
	886	default "0" if !CONFIG_OPTIMIZE
	887	default "1" if OPT_1
	888	default "2" if OPT_2
[84a3fda]	889
[e5d44f5]	890	#--- End Optimizations
[a705708]	891
[e5d44f5]	892	#-- Internal Settings
	893	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	894
[e5d44f5]	895	config SCRIPT_ROOT
	896	string "Scripts root"
	897	default "jhalfs"
[4da2512]	898
[e5d44f5]	899	config JHALFSDIR
	900	string "jhalfs directory"
	901	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	902
[e5d44f5]	903	config LOGDIRBASE
	904	string "Build logs directory basename"
	905	default "logs"
[93346ee]	906
[e5d44f5]	907	config LOGDIR
	908	string "Build logs directory"
	909	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	910
[e5d44f5]	911	config TESTLOGDIRBASE
	912	string "Test suites logs directory basename"
	913	default "test-logs"
[4da2512]	914
[e5d44f5]	915	config TESTLOGDIR
	916	string "Test suites logs directory"
	917	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	918
[e5d44f5]	919	config FILELOGDIRBASE
	920	string "Installed files logs directory basename"
	921	default "installed-files"
[93346ee]	922
[e5d44f5]	923	config FILELOGDIR
	924	string "Installed files logs directory"
	925	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	926
[e5d44f5]	927	config ICALOGDIR
	928	string "ICA logs directory"
	929	default "$LOGDIR/ICA"
[4da2512]	930
[e5d44f5]	931	config MKFILE
	932	string "Makefile"
	933	default "$JHALFSDIR/Makefile"
[4da2512]	934
[e5d44f5]	935	config XSL
	936	string "XSL stylesheet"
[8825e69]	937	default "lfs.xsl"
[4da2512]	938
[e5d44f5]	939	config PKG_LST
	940	string "Package contents list"
	941	default "unpacked"
[4da2512]	942
[e5d44f5]	943	#--- End Internal Settings
	944	endmenu
[4da2512]	945
[a705708]	946	#--- End Advanced Features
	947	endmenu
[7b6ecc5]	948
[a16f769]	949	config REBUILD_MAKEFILE
[06eddf4]	950	# depends on !BOOK_BLFS
[e5d44f5]	951	bool "Rebuild the Makefile (see help)"
	952	default n
	953	help
	954	#-- Rebuild the Makefile
	955	#
	956	# This option allows to rebuild the Makefile after
	957	# customizing the base system build scripts.
	958	#
	959	# See README.CUSTOM for more info about this feature.
[06eddf4]	960	# Note that you should do that after configuring a jhalfs
	961	# build, and only if you need changing the build scripts order
	962	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 30a444a

Download in other formats: