Context Navigation

source: Config.in@ 4c36783

ablfs-more trunk

Last change on this file since 4c36783 was 7f25c70, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

reinstate sudo as a dependency of blfs tools

Was removed at a preceding commit for no good reason
(pebkac?)

Property mode set to 100644

File size: 30.6 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config PROGNAME
	49	string
	50	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	51
	52	config RUN_ME
	53	string
[e3f41e33]	54	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	55	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	56	#--- End BOOK/script
	57
	58	#--- Book version
	59	choice
	60	prompt "Release"
[1e686d1]	61	default relGIT
[e5d44f5]	62
	63	config relGIT
	64	bool "GIT"
	65	help
[1e686d1]	66	Current development git trunk branch
[e5d44f5]	67
	68	config WORKING_COPY
	69	bool "Working Copy"
	70	help
	71	A local working copy
	72
	73	config BRANCH
[e3f41e33]	74	bool "Branch or stable book"
[e5d44f5]	75	help
[1e686d1]	76	A supported GIT branch or tag
[e5d44f5]	77	endchoice
	78
	79	config BRANCH_ID
	80	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	81	default "EDIT ME"
[f596dde]	82	depends on BRANCH
[e5d44f5]	83	help
	84	A list of valid branches and stable book IDs is available at
	85	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	86
	87	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	88	YYY version.
	89
	90	config BOOK
	91	string "Loc of working copy (mandatory)"
	92	default "EDIT ME"
[f596dde]	93	depends on WORKING_COPY
[e5d44f5]	94	help
	95	The full path to a local copy of the book XML sources
	96
[13e52a5]	97	choice
	98	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && (BRANCH \|\| WORKING_COPY)
	99	prompt "Mutilib"
	100	default LFS_MULTILIB_NO
	101	config LFS_MULTILIB_NO
	102	bool "Standard LFS on i686 or amd64"
	103	help
[b6e981a]	104	Use standard LFS book (choose this if not multilib source)
[13e52a5]	105
	106	config LFS_MULTILIB_I686
	107	bool "Multilib LFS on amd64 with i686 libraries"
	108	help
	109	Use Multilib LFS book with i686 libraries
	110
	111	config LFS_MULTILIB_X32
	112	bool "Multilib LFS on amd64 with x32 libraries"
	113	help
	114	Use Multilib LFS book with x32 libraries
	115
	116	config LFS_MULTILIB_ALL
	117	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	118	help
	119	Use Multilib LFS book with i686 and x32 libraries
	120
	121	endchoice
	122
	123	config MULTILIB
	124	string
	125	default "default" if LFS_MULTILIB_NO
	126	default "ml_32" if LFS_MULTILIB_I686
	127	default "ml_x32" if LFS_MULTILIB_X32
	128	default "ml_all" if LFS_MULTILIB_ALL
	129
[e5d44f5]	130	#--- End BOOK version
	131
	132	choice
	133	prompt "Build method"
[e3f41e33]	134	default BUILD_CHROOT
[e5d44f5]	135	help
	136	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	137	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	138	a full explanation.
	139
	140	config BUILD_CHROOT
	141	bool "chroot"
	142
	143	config BUILD_BOOT
	144	bool "boot"
	145	endchoice
	146
	147	config METHOD
	148	string
	149	default "chroot" if BUILD_CHROOT
	150	default "boot" if BUILD_BOOT
	151
	152	config BOOT_CONFIG
	153	string "BOOT kernel config file (mandatory)"
	154	default "*EDIT ME*"
	155	depends on BUILD_BOOT
	156	help
	157	If METHOD=boot, location of boot-kernel config file
	158	The config file will be copied to ${BUILD_DIR}/sources
	159	and renamed 'bootkernel-config'
	160	NOTE: this setting is required
	161
	162	#--- blfs-tool Support
	163	config BLFS_TOOL
	164	bool "Add blfs-tool support"
	165	default n
[e3f41e33]	166	depends on !BOOK_BLFS
[e5d44f5]	167	help
	168	Activating this option will install additional packages needed
	169	to use blfs tools after booting the new system.
	170	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	171	(see below).
	172	After booting the new xLFS system, but before using the blfs tools,
	173	you should create a user account, move the /blfs_root directory
	174	to that user's home, and change its ownership to that of the user.
	175	Also, be sure to give the user read and write access on the
	176	$TRACKING_DIR directory and the files that it contains.
	177	Don't forget to configure sudo properly on the new system.
	178
	179	config DUMMY # Avoid indenting the items below
	180	bool
	181
	182	if BLFS_TOOL
	183	menu "blfs-tool dependencies"
	184
	185	config DEP_LIBXML
	186	bool "libxml2 (required)"
	187	default y
	188
	189	config DEP_LIBXSLT
	190	bool "libxslt (required)"
	191	default y
	192
	193	config DEP_DBXML
	194	bool "DocBook XML DTD (required)"
	195	default y
	196
	197	config DEP_LYNX
	198	bool "lynx (optional, for reading the generated book)"
	199	default y
	200
[7f25c70]	201	config DEP_SUDO
	202	bool "sudo (recommended)"
	203	default y
	204
[e5d44f5]	205	config DEP_WGET
	206	bool "wget (recommended)"
	207	default y
	208
	209	config DEP_GPM
	210	bool "GPM (optional, see help)"
	211	default n
	212	help
	213	if you install gpm, it will be started
[90f5b6d]	214	automatically on boot. It allows copy-paste
	215	while Xorg is not installed.
[e5d44f5]	216
[1e686d1]	217	config DEP_GIT
	218	bool "GIT client (optional, see help)"
[e5d44f5]	219	default n
	220	help
[1e686d1]	221	Git is needed for updating the book
[90f5b6d]	222	sources. You do not need it if building a
	223	stable book.
[e5d44f5]	224
	225	endmenu
	226
	227	choice
	228	prompt "BLFS Release"
[1e686d1]	229	default BLFS_GIT
[e5d44f5]	230
[1e686d1]	231	config BLFS_GIT
	232	bool "BLFS GIT"
[e5d44f5]	233	help
	234	Current development version as in trunk
	235
	236	config BLFS_WORKING_COPY
	237	bool "BLFS working copy"
	238	help
	239	A local working copy of the BLFS book.
	240
	241	config BLFS_BRANCH
	242	bool "BLFS Branch or stable book"
	243	help
[1e686d1]	244	A supported GIT branch or stable (tag) book release
[e5d44f5]	245	endchoice
	246
	247	config BLFS_WC_LOCATION
	248	string "Location of the local BLFS working copy (mandatory)"
	249	default "EDIT ME"
	250	depends on BLFS_WORKING_COPY
	251	help
[506120ee]	252	Full path to the BLFS book working copy
[e5d44f5]	253
	254	config BLFS_BRANCH_ID
	255	string "BLFS Book Version (mandatory)"
	256	default "EDIT ME"
	257	depends on BLFS_BRANCH
	258	help
	259	A list of valid branches and stable book IDs is available at
	260	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	261	endif
	262	#--- End blfs-tool Support
	263
	264	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	265	# or directly)
	266	config BLFS_ROOT
	267	string "Root of the tools directory (see help)"
	268	default "/blfs_root"
	269	depends on BLFS_TOOL \|\| BOOK_BLFS
	270	help
	271	Path to the directory where all required files and scripts
	272	will be stored.
	273
	274	This path must begin with a slash, and:
	275	- is relative to the user's HOME directory when installing the
	276	blfs tools on an already existing LFS system.
	277	- is relative to the root of the build directory (`/' in chroot)
	278	when adding the tools after a jhalfs run
	279
	280	CAUTION: this directory will be removed if it already exists.
	281
	282	config BLFS_XML
	283	string "BLFS sources directory (internal parameter)"
	284	default "blfs-xml"
[f596dde]	285	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	286	help
	287	The directory name under $BLFS_ROOT where the BLFS
	288	book sources will be copied or checked out. Do not change that
	289	unless you know what you are doing...
[506120ee]	290
[f733772]	291	config LFS_XML
	292	string "LFS sources directory (internal parameter)"
	293	default "lfs-xml"
[f596dde]	294	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	295	help
	296	The directory name under $BLFS_ROOT where the LFS
	297	book sources will be copied or checked out. Do not change that
	298	unless you know what you are doing...
	299
[506120ee]	300	choice
	301	prompt "LFS Release"
[1e686d1]	302	default LFS_relGIT
[f596dde]	303	depends on BOOK_BLFS
[506120ee]	304
[1e686d1]	305	config LFS_relGIT
	306	bool "LFS GIT"
[506120ee]	307	help
	308	Current development version as in trunk
	309
	310	config LFS_WORKING_COPY
	311	bool "LFS working copy"
	312	help
	313	A local working copy of the LFS book.
	314
	315	config LFS_BRANCH
	316	bool "LFS Branch or stable book"
	317	help
[1e686d1]	318	A supported GIT branch or stable (tag) book release
[506120ee]	319	endchoice
	320
	321	config BLFS_LFS_BOOK
	322	string "Location of the local LFS working copy (mandatory)"
	323	default "EDIT ME"
	324	depends on LFS_WORKING_COPY
	325	help
	326	Full path to the LFS book working copy"
	327
	328	config BLFS_LFS_BRANCH_ID
	329	string "LFS Book Version (mandatory)"
	330	default "EDIT ME"
	331	depends on LFS_BRANCH
	332	help
	333	A list of valid branches and stable book IDs is available at
	334	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	335	# End of BLFS parameters
	336
	337	#--- Custom Tools support
	338	config CUSTOM_TOOLS
[f596dde]	339	depends on !BOOK_BLFS
[e5d44f5]	340	bool "Add custom tools support"
	341	default n
	342	help
	343	Activating this option additional packages you create
	344	will be installed after finished the xLFS system build.
	345	#--- End Custom Tools support
	346
[e3ccc27]	347	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	348	# As well.
	349	config TRACKING_DIR
	350	string "Installed packages database directory"
	351	default "/var/lib/jhalfs/BLFS"
	352	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	353	help
	354	Full path to the directory where the database of
	355	installed packages will be created.
	356
	357	If the blfs tools are installed on a running xLFS system,
	358	the user must have enough privileges to create this directory.
	359	It may be necessary to create the /var/lib/jhalfs directory as
	360	root, and make it writable by the user before running this tool.
	361
	362	If you are installing the blfs tools as part of an xLFS build
	363	and/or using the customized scripts feature, you will
	364	need to fix this directory's permissions after booting
	365	the new system.
	366
	367	Note that the user that will build the packages must
	368	have read and write access to this directory.
[53f291f]	369
[a705708]	370	#--- End BOOK Settings
	371	endmenu
	372
[e5d44f5]	373	menu "General Settings"
[e3ccc27]	374	depends on !BOOK_BLFS
[e5d44f5]	375
[b7583ec]	376	#--- {C,H,}LFS User Account
	377
	378	config LUSER
[e5d44f5]	379	string
	380	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	381
	382	config LGROUP
	383	string
[b7583ec]	384	default LUSER
[e5d44f5]	385
	386	config LHOME
	387	string
[b7583ec]	388	default "/home"
	389
[e5d44f5]	390	#--- End Set User Account
	391
	392	config BUILDDIR
	393	string "Build Directory"
	394	default "/mnt/build_dir"
	395	help
	396	#-- The directory where the created system will be located.
	397	# NOTE: A working directory named jhalfs will be created
	398	# here, so ensure this does not conflict with the jhalfs
	399	# source directory.
	400
	401	config GETPKG
	402	bool "Retrieve source files"
	403	default n
	404	help
	405	#-- Download all packages and patches required by the selected book
	406	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	407	# first and if necessary retrieves them from the 'net.
	408	# Files will be transferred to $BUILDDIR/sources.
	409
	410	config SRC_ARCHIVE
	411	string "Package Archive Directory"
	412	default "$SRC_ARCHIVE"
[f596dde]	413	depends on GETPKG
[e5d44f5]	414	help
	415	#-- A local archive for packages/files (not $BUILDDIR/sources)
	416	# Any missing file will be downloaded and archived here,
	417	# if the user has the right privileges.
	418
	419	config RETRYSRCDOWNLOAD
	420	bool "Retry on 'connection refused' failure"
	421	default n
[f596dde]	422	depends on GETPKG
[e5d44f5]	423	help
	424	#-- Attempt to download a source package again if it fails
	425	# with a 'connection refused' error. This can happen on
	426	# servers that are overloaded.
	427
	428	config RETRYDOWNLOADCNT
	429	int "Number of retry attempts on download failures"
	430	default 20
[f596dde]	431	depends on GETPKG
[e5d44f5]	432	help
	433	#-- Number of times to retry a failed download.
	434
	435	config DOWNLOADTIMEOUT
	436	int "Download timeout (in seconds)"
	437	default 30
[f596dde]	438	depends on GETPKG
[e5d44f5]	439	help
	440	#-- Number of seconds to wait for a download to start before
	441	# timing out.
	442
	443	config SERVER
	444	string "FTP mirror"
	445	default "http://ftp.osuosl.org"
[f596dde]	446	depends on GETPKG
[e5d44f5]	447	help
	448	#-- FTP mirror to download packages and patches if not found
	449	# in $SRC_ARCHIVE
	450	# As a last resort, the files will downloaded from upstream,
	451	# if possible.
	452
	453	config RUNMAKE
	454	bool "Run the makefile"
	455	default n
	456	help
	457	#-- Automatically run the makefile once it has been created
	458
	459	config CLEAN
	460	bool "Rebuild files"
	461	default n
	462	help
	463	#-- Clean the build directory before performing any other task.
	464	# The directory is cleaned only if it was populated by a
	465	# previous JHALFS run.
[a705708]	466
	467	#--- End General Settings
	468	endmenu
	469
[e5d44f5]	470	menu "Build Settings"
[e3ccc27]	471	depends on !BOOK_BLFS
[e5d44f5]	472
	473	#--- Test Suites
	474	config CONFIG_TESTS
	475	bool "Run testsuites"
	476	default y
	477	help
	478	#-- Run test suites
[1d5f3e3]	479	# If you select 'y' here:
[e5d44f5]	480	# You will have to select between:
[945ccaa]	481	# - Only critical final system testsuites
[e5d44f5]	482	# - All final system testsuites
	483	# You will be prompted also about the "flavour" of the
	484	# testsuites run:
	485	# - Don't stop on test suite failures
	486	# - Abort the build at the first test suite failure
	487	#
[1d5f3e3]	488	# Note that in any case, all the test instructions will
	489	# be generated. Those which are not wanted will be commented
	490	# out. If you select 'n' here, the commented test instructions
	491	# do not stop on test suite failures.
[e5d44f5]	492
[945ccaa]	493	menu "Test settings"
[f596dde]	494	depends on CONFIG_TESTS
[e5d44f5]	495	choice
	496	prompt "Tests level"
	497	default TST_1
	498
	499	config TST_1
[945ccaa]	500	bool "Only final system critical testsuites"
	501	help
	502	#-- Critical tests:
	503	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	504	# testsuites for final system. The others are commented
	505	# out.
[e5d44f5]	506
	507	config TST_2
	508	bool "All final system testsuites"
[1d5f3e3]	509	help
	510	#-- All final system test suites:
	511	# Test instructions for the temporary tools (if available)
	512	# are commented out.
[e5d44f5]	513
	514	endchoice
	515
	516	choice
	517	prompt "Flavour"
	518
	519	config NO_BOMB
[945ccaa]	520	bool "Don't stop on test failures"
[e5d44f5]	521
	522	config BOMB
[945ccaa]	523	bool "Abort the build on the first test failure"
[e5d44f5]	524	endchoice
	525
[30a8961]	526	endmenu # test settings
	527
[945ccaa]	528	config TEST
	529	int
	530	default "0" if !CONFIG_TESTS
	531	default "1" if TST_1
	532	default "2" if TST_2
	533
[e5d44f5]	534	config BOMB_TEST
	535	bool
	536	default n if NO_BOMB
	537	default y if BOMB
[30a8961]	538	#--- End Test Suites
[e5d44f5]	539
	540	#--- Package Management
	541	config PKGMNGT
	542	bool "Package management"
[f596dde]	543	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	544	default n
	545	help
	546	#-- Use package management
	547	#
[945ccaa]	548	# If set, you'll have to choose between
	549	# two package management styles:
	550	# - Build and install:
	551	# the packages in the final phase are built
	552	# in a separate directory, PKG_DEST.
	553	# You should provide a bash function for
[4b2a5fd]	554	# packaging and installing the package.
[945ccaa]	555	# - Preload a library before install:
	556	# Run the install instructions inside a
	557	# wrapper command, which monitors the
	558	# installed files.
	559	#
[e5d44f5]	560	# Also, you have to provide the instructions
	561	# to build the package manager during the
	562	# temporary tools phase, in the form of a
	563	# sect1 of the book identical to a package
	564	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	565	choice
[f596dde]	566	depends on PKGMNGT
[945ccaa]	567	prompt "Package management style"
	568	default PKG_PACK
	569
	570	config PKG_PACK
	571	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	572
[945ccaa]	573	config LIB_LOAD
	574	bool "Preload a library before installing (porg style)"
	575	endchoice
	576
	577	config WRAP_INSTALL
	578	bool
	579	default y if LIB_LOAD
	580	default n if PKG_PACK
[e5d44f5]	581	#--- End package management
	582
	583	#--- Installed files logs
	584	config INSTALL_LOG
	585	bool "Create a log of installed files for each package"
	586	default n
	587	help
	588	#-- Select this if you want to create logs of the files
	589	# installed by each package on the final system.
	590
	591	#--- End Installed files logs
	592
[945ccaa]	593	config STRIP
	594	bool "Strip Installed Binaries/Libraries"
	595	default n
	596
[dc7fd7b]	597	config DEL_LA_FILES
[d2a7ec8]	598	bool "Remove libtool .la files"
[dc7fd7b]	599	default y
	600	help
	601	#-- Remove files libxxx.la installed by libtool. For a rationale
	602	# see https://blog.flameeyes.eu/tags/lafiles/
	603
[945ccaa]	604	config NO_PROGRESS_BAR
[f596dde]	605	bool "DO NOT use/display progress_bar"
[945ccaa]	606	default n
	607	help
	608	#-- Do not use the progress bar routine. On slower machines
	609	# this function consumes precious CPU cycles.
	610
	611	#--- End Build Settings
	612	endmenu
	613
[6990d80]	614	menu "System configuration"
[e3ccc27]	615	depends on !BOOK_BLFS
[945ccaa]	616
[e5d44f5]	617	#--- FSTAB
	618	config HAVE_FSTAB
	619	bool "Use a custom fstab file"
	620	default n
	621	help
	622	#-- Select this if you have an fstab file with entries
[945ccaa]	623	# for the target system
[a705708]	624
[e5d44f5]	625	config FSTAB
	626	string "Fstab file (optional)"
	627	default "*EDIT ME*"
	628	depends on HAVE_FSTAB
	629	help
	630	#-- The location of fstab file (if empty, a template is created)
	631	#--- End FSTAB
	632
	633	#--- Kernel
	634	config CONFIG_BUILD_KERNEL
	635	bool "Build the kernel"
	636	default n
	637	help
	638	#-- Select this option if you wish to build the kernel.
	639	#
	640	# You will be prompted for the full path to the .config
	641	# file. It will be copied to the 'sources' directory and
	642	# renamed kernel-config
	643
	644	config CONFIG
	645	string "Kernel config file"
	646	default "*EDIT ME*"
	647	depends on CONFIG_BUILD_KERNEL
	648	help
	649	#-- Fully qualified path to a kernel config file
	650	# The config file will be copied to ${BUILD_DIR}/sources
	651	# and renamed 'kernel-config'
	652	#--- End Kernel
	653
[085435e]	654	config NCURSES5
	655	bool "Install non-wide-character ncurses"
[e5d44f5]	656	default n
[085435e]	657	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	658	help
[085435e]	659	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	660
	661	config TIMEZONE
	662	string "TimeZone"
	663	default "GMT"
	664	help
	665	#-- The timezone as output by tzselect
	666	# This will be copied to /etc/localtime
	667
	668	config LANG
	669	string "Language"
	670	default "$LANG"
	671	help
	672	#-- LANG variable set in /etc/profile
	673	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	674	# for values (or the file localedata/SUPPORTED in glibc tarball)
	675
	676	config FULL_LOCALE
	677	bool "Install the full set of locales"
	678	default n
	679	help
	680	#-- If set to y, the full set of supported locales
	681	# will be installed. Otherwise, only the minimal set
	682	# necessary for the tests will be installed,
	683	# together with the locale associated with the
	684	# LANG you have chosen, if not in the minimal set.
	685
	686	#--- Groff page
	687	choice
	688	prompt "Groff page size"
	689	default PAGE_LETTER
	690	help
	691	#-- Page definition for groff: letter or A4
	692
	693	config PAGE_LETTER
	694	bool "letter"
	695
	696	config PAGE_A4
	697	bool "A4"
	698	endchoice
	699
	700	config PAGE
	701	string
	702	default "letter" if PAGE_LETTER
	703	default "A4" if PAGE_A4
	704	#--- End Groff page
[a705708]	705
[945ccaa]	706	config HOSTNAME
[6990d80]	707	string "Hostname (see help)"
[945ccaa]	708	default "EDITME"
[6990d80]	709	help
	710	If you are on a public network, use the hostname given to you by
	711	your institution, or corporation, etc. If your network is private,
	712	that is, behind a firewall such as a box to connect to your ISP,
	713	you can choose anything you'd like. Combined with the domain name
	714	"local", you have the possibility to access your computer by name
	715	instead of address on the private network (see RFC 6762 and
	716	https://www.howtogeek.com/167190/).
[945ccaa]	717
	718	menu "Network configuration"
	719	config INTERFACE
	720	string "netword card name"
	721	default "eth0"
[6990d80]	722	help
	723	eth0 is used in most cases. Virtual insterfaces may get other
	724	names (for example enp0s3 for the default network stack in qemu).
	725	Systemd may also rename network interfaces according to their
	726	bus addresses.
[945ccaa]	727	config IP_ADDR
	728	string "Static IP address"
	729	default "10.0.2.9"
[6990d80]	730	help
	731	The default here is for a virtual interface in qemu. Private
	732	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	733	You have to know your network prefix. Then the last figure
	734	may be anything you like.
	735
[945ccaa]	736	config GATEWAY
	737	string "Gateway"
	738	default "10.0.2.2"
[6990d80]	739	help
	740	Again, this default is for a qemu network stack. Usually, the
	741	gateway is the address of your firewall.
[945ccaa]	742	config PREFIX
	743	string "Subnet prefix"
	744	default "24"
[6990d80]	745	help
	746	Again, this default is for a qemu network stack, but is also
	747	the most used in private networks.
[945ccaa]	748	config BROADCAST
	749	string "Broadcast address"
	750	default "10.0.2.255"
	751	config DOMAIN
[6990d80]	752	string "Domain name (see help)"
	753	default "local"
	754	help
	755	Domain Name:
	756	Doamin names are registered, so if your computer is on a public
	757	network, you cannot use any name you'd like. On a public
	758	network, you should have been given a domain name by
	759	your corporation, institution, etc.
	760	If your network is really private, that is behind a firewall
	761	such as a box for connecting to an ISP, you can choose any
	762	domain you'd like. You can also opt for "local", see RFC 6762,
	763	or "something.test", see RFC 6761.
[945ccaa]	764	config DNS1
	765	string "Primary Name server"
	766	default "10.0.2.3"
	767	config DNS2
	768	string "Secondary Name server"
	769	default "8.8.8.8"
	770	endmenu # Network configuration
	771
	772	menu "Console configuration"
	773	config FONT
	774	string "Console font"
	775	default "lat0-16"
[3b43e17b]	776	help
	777	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	778	etc, must be done manually.
[945ccaa]	779	config KEYMAP
	780	string "Keymap name"
	781	default "us"
[3b43e17b]	782	config LOCAL
	783	boolean "Hardware clock is set to local time"
	784	default n
	785	help
	786	If the harware clock is set to local time, answer yes,
	787	If it is set to UTC, answer no
	788	config LOG_LEVEL
	789	string "Default log level (1-8)"
	790	default "4"
[f596dde]	791	depends on BOOK_LFS
[3b43e17b]	792	help
	793	This can be changed using dmesg. 1 means "no message",
	794	8 shows every message sent by the kernel, which is very
	795	noisy. The default at boot time is 7, which is quite
	796	noisy too.
[945ccaa]	797	endmenu # Console configuration
	798
	799	endmenu #--- System configuration
[a705708]	800
[e5d44f5]	801	menu "Advanced Features"
[e3ccc27]	802	depends on !BOOK_BLFS
[e5d44f5]	803
	804	config REPORT
	805	bool "Create SBU and disk usage report"
	806	default y
	807
[f5ecc28]	808	config SAVE_CH5
	809	bool "Save Chapter 5 work"
	810	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	811	default n
	812	help
	813	Save the state of jhalfs at the end of chapter 5:
	814
	815	if you tick this item, the whole $LFS directory is
	816	saved when chapter 5 is finished. It'll be in an xz
	817	compressed tarball in the $LFS/jhalfs directory
	818
[f596dde]	819	#--- ICA
[e5d44f5]	820	config COMPARE
	821	bool "Run comparison analysis on final stage"
	822	default n
	823	help
	824	#-- Should an iterative comparison analysis be performed?
	825	#
[f596dde]	826	# Unless you are familiar with ICA, do not
[e5d44f5]	827	# select this option
	828	#
[f596dde]	829	# ICA is an analysis tool for comparing one
[e5d44f5]	830	# build to the next. Builds mays differ from one iteration
[f596dde]	831	# to another due to the build order and this tool try
[e5d44f5]	832	# to ferret out those differences by examining the stored
	833	# build logs and binary files.
	834	#
	835	# The scripts are well commented and can be found in ./extras/*
	836	#
	837
	838	config ITERATIONS
	839	int "Number of test runs (2,3,4,5)" if COMPARE
	840	depends on COMPARE
	841	range 2 5
	842	default 3
	843
	844	config RUN_ICA
[f596dde]	845	bool
	846	default y if COMPARE
[e5d44f5]	847
[f596dde]	848	#--- End ICA
[e5d44f5]	849
	850	#--- Optimizations
	851	config CONFIG_OPTIMIZE
	852	bool "Optimization and parallelization"
	853	default n
	854	help
	855	# Opens a menu for various optimization settings:
	856	# Actual optimization flags MUST be defined in ./optimize/*
	857	# before activating this option.
	858	#
	859	# WARNING: The use of build optimizations may lead to build issues.
	860	# If the system doesn't work as expected, please rebuild
	861	# without optimizations before asking for support.
	862	menu "Optimization settings"
	863	depends on CONFIG_OPTIMIZE
	864
	865	config N_PARALLEL
	866	int "Number of parallel `make' jobs"
	867	default 1
	868	help
	869	#-- The usual recommandation is (number of CPU cores)+1
	870	# Do not set for meaningful SBU calculations.
	871
	872	choice
[f596dde]	873	prompt "Optimization level"
[e5d44f5]	874	default OPT_1
	875	help
	876	#-- Optimization values are set in optimize/* files
	877
	878	config OPT_1
	879	bool "Final system only"
	880
	881	config OPT_2
	882	bool "Both temp tools and final system"
	883
	884	endchoice
[84a3fda]	885
	886	config REALSBU
	887	bool "Build Binutls pass1 without optimization (Real SBU)"
	888	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	889	default n
	890	help
	891	#-- Use -j1 in make invokation for Binutils pass1 to
	892	# get a valid SBU value.
	893
[9d665db]	894	endmenu # Optimization settings
[e5d44f5]	895	config OPTIMIZE
	896	int
	897	default "0" if !CONFIG_OPTIMIZE
	898	default "1" if OPT_1
	899	default "2" if OPT_2
[84a3fda]	900
[e5d44f5]	901	#--- End Optimizations
[a705708]	902
[e5d44f5]	903	#-- Internal Settings
	904	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	905
[e5d44f5]	906	config SCRIPT_ROOT
	907	string "Scripts root"
	908	default "jhalfs"
[4da2512]	909
[e5d44f5]	910	config JHALFSDIR
	911	string "jhalfs directory"
	912	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	913
[e5d44f5]	914	config LOGDIRBASE
	915	string "Build logs directory basename"
	916	default "logs"
[93346ee]	917
[e5d44f5]	918	config LOGDIR
	919	string "Build logs directory"
	920	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	921
[e5d44f5]	922	config TESTLOGDIRBASE
	923	string "Test suites logs directory basename"
	924	default "test-logs"
[4da2512]	925
[e5d44f5]	926	config TESTLOGDIR
	927	string "Test suites logs directory"
	928	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	929
[e5d44f5]	930	config FILELOGDIRBASE
	931	string "Installed files logs directory basename"
	932	default "installed-files"
[93346ee]	933
[e5d44f5]	934	config FILELOGDIR
	935	string "Installed files logs directory"
	936	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	937
[e5d44f5]	938	config ICALOGDIR
	939	string "ICA logs directory"
	940	default "$LOGDIR/ICA"
[4da2512]	941
[e5d44f5]	942	config MKFILE
	943	string "Makefile"
	944	default "$JHALFSDIR/Makefile"
[4da2512]	945
[e5d44f5]	946	config XSL
	947	string "XSL stylesheet"
	948	default "$PROGNAME.xsl"
[4da2512]	949
[e5d44f5]	950	config PKG_LST
	951	string "Package contents list"
	952	default "unpacked"
[4da2512]	953
[e5d44f5]	954	#--- End Internal Settings
	955	endmenu
[4da2512]	956
[a705708]	957	#--- End Advanced Features
	958	endmenu
[7b6ecc5]	959
[a16f769]	960	config REBUILD_MAKEFILE
[06eddf4]	961	# depends on !BOOK_BLFS
[e5d44f5]	962	bool "Rebuild the Makefile (see help)"
	963	default n
	964	help
	965	#-- Rebuild the Makefile
	966	#
	967	# This option allows to rebuild the Makefile after
	968	# customizing the base system build scripts.
	969	#
	970	# See README.CUSTOM for more info about this feature.
[06eddf4]	971	# Note that you should do that after configuring a jhalfs
	972	# build, and only if you need changing the build scripts order
	973	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 4c36783

Download in other formats: