Context Navigation

source: Config.in@ 4ddaa8e

experimental

Last change on this file since 4ddaa8e was 9c9775f, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago
Updated experimental branch to current trunk code.
Property mode set to `100644`
File size: 26.2 KB

Rev	Line
[3b0fb28]	1	menu "--- BOOK Settings"
	2
	3	#--- BOOK/script
[613d46b]	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
[33c34c9]	8	#-- Select the BOOK/Build style you wish to configure.
[613d46b]	9
	10	config BOOK_LFS
[33c34c9]	11	bool "Linux From Scratch"
[3b0fb28]	12
[613d46b]	13	config BOOK_CLFS
[33c34c9]	14	bool "Cross-Compiled Linux From Scratch"
[3b0fb28]	15
[613d46b]	16	config BOOK_CLFS2
[9c9775f]	17	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
[3b0fb28]	18
[9c9775f]	19	config BOOK_CLFS3
	20	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
[3b0fb28]	21
[613d46b]	22	config BOOK_HLFS
[33c34c9]	23	bool "Hardened Linux From Scratch"
[3b0fb28]	24
[00f4966]	25	config BOOK_BLFS
	26	bool "Beyond Linux From Scratch"
[613d46b]	27	endchoice
[3b0fb28]	28
[2b0f8a5]	29	config PROGNAME
	30	string
	31	default "lfs" if BOOK_LFS
	32	default "clfs" if BOOK_CLFS
	33	default "clfs2" if BOOK_CLFS2
[9c9775f]	34	default "clfs3" if BOOK_CLFS3
[2b0f8a5]	35	default "hlfs" if BOOK_HLFS
	36	default "blfs" if BOOK_BLFS
	37
[613d46b]	38	config RUN_ME
	39	string
[2b0f8a5]	40	default "./jhalfs run" if !BOOK_BLFS
	41	default "./blfs-tool" if BOOK_BLFS
[3b0fb28]	42	#--- End BOOK/script
[613d46b]	43
[3b0fb28]	44	#--- Book version
[613d46b]	45	choice
	46	prompt "Release"
	47	default relSVN
	48	config relSVN
	49	bool "SVN"
[33c34c9]	50	help
	51	#-- Current development version as in trunk
[3b0fb28]	52
[613d46b]	53	config WORKING_COPY
	54	bool "Working Copy"
[00f4966]	55	depends on !BOOK_BLFS
[33c34c9]	56	help
	57	#-- A local working copy
[3b0fb28]	58
[613d46b]	59	config BRANCH
[9c9775f]	60	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
[33c34c9]	61	help
	62	#-- A supported SVN branch or stable released book
[613d46b]	63	endchoice
	64
	65	config BRANCH_ID
[1b99a8b]	66	string "Book Version (mandatory)"
[f2382aa]	67	default "EDIT ME"
[613d46b]	68	depends BRANCH
[14f86de]	69	help
[fa58f81]	70	#-- A list of valid branches and stable books ID's is available here.
[14f86de]	71	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
[613d46b]	72
	73	config BOOK
[65a2be6]	74	string "Loc of working copy (mandatory)"
[613d46b]	75	default "EDIT ME"
	76	depends WORKING_COPY
[14f86de]	77	help
[3b0fb28]	78	#-- The full path to a local copy of the book XML sources
[14f86de]	79	#
[3b0fb28]	80	#--- End BOOK version
[613d46b]	81
[3b0fb28]	82	#--- CLFS specific params
[613d46b]	83	choice
	84	prompt "Target architecture"
	85	default ARCH_X86
[9c9775f]	86	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[613d46b]	87	help
[9c9775f]	88	#-- Choose the target system base architecture
[3b0fb28]	89
[613d46b]	90	config ARCH_X86
[056486c]	91	bool "x86"
[3b0fb28]	92
[613d46b]	93	config ARCH_MIPS
	94	bool "mips" if !BOOK_CLFS2
[3b0fb28]	95
[613d46b]	96	config ARCH_PPC
[9c9775f]	97	bool "ppc" if BOOK_CLFS
[3b0fb28]	98
[613d46b]	99	config ARCH_SPARC
[9c9775f]	100	bool "sparc" if BOOK_CLFS
[3b0fb28]	101
[613d46b]	102	config ARCH_ALPHA
[9c9775f]	103	bool "alpha" if !BOOK_CLFS3
[3b0fb28]	104
[613d46b]	105	config ARCH_ARM
	106	bool "arm" if !BOOK_CLFS
[9c9775f]	107
	108	config ARCH_HPPA
	109	bool "hppa" if BOOK_CLFS2
	110	endchoice
	111
	112	choice
	113	prompt "Hardware Platform"
	114	depends BOOK_CLFS3 && ARCH_MIPS
	115	default PLATFORM_GENERIC
	116	help
	117	# Chose a destination platform
	118	# Platform specific files will be included
	119
	120	config PLATFORM_GENERIC
	121	bool "Generic platform"
	122
	123	config PLATFORM_WRT
	124	bool "WRT - MIPS based wireless router" if ARCH_MIPS
[613d46b]	125	endchoice
	126
	127	choice
	128	prompt "Library"
[9c9775f]	129	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
	130	default DATA_32
	131	help
	132	#-- Choose the target system libraries type
[3b0fb28]	133
[613d46b]	134	config DATA_32
[9c9775f]	135	bool "32-bit"
[3b0fb28]	136
[613d46b]	137	config DATA_64
[9c9775f]	138	bool "64-bit" if !ARCH_PPC
[3b0fb28]	139
[613d46b]	140	config DATA_MULTI
[9c9775f]	141	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
[613d46b]	142	endchoice
	143
	144	choice
[9c9775f]	145	prompt "Processor type"
	146	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
	147	help
	148	#-- Choose the target system processor
[3b0fb28]	149
[613d46b]	150	config PROC_i486
[9c9775f]	151	bool "486 Compatibles" if ARCH_X86
[3b0fb28]	152
[613d46b]	153	config PROC_i586
[9c9775f]	154	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[3b0fb28]	155
[613d46b]	156	config PROC_i686
[9c9775f]	157	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[3b0fb28]	158
[613d46b]	159	config PROC_mipsel
[9c9775f]	160	bool "MIPS Little Endian" if ARCH_MIPS
[3b0fb28]	161
[613d46b]	162	config PROC_mips
[9c9775f]	163	bool "MIPS Big Endian" if ARCH_MIPS
	164
	165	config PROC_unknown
	166	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
	167
	168	config PROC_hppa1
	169	bool "PA 7000 Series" if ARCH_HPPA
	170
	171	config PROC_hppa2
	172	bool "PA 8000 Series" if ARCH_HPPA
	173
	174	config PROC_EV5
	175	bool "EV5 Series" if ARCH_ALPHA
	176
	177	config PROC_EV56
	178	bool "EV56 Series" if ARCH_ALPHA
	179
	180	config PROC_PCA56
	181	bool "PCA56 Series" if ARCH_ALPHA
	182
	183	config PROC_PCA57
	184	bool "PCA57 Series" if ARCH_ALPHA
	185
	186	config PROC_EV6
	187	bool "EV6 Series" if ARCH_ALPHA
	188
	189	config PROC_EV67
	190	bool "EV67 Series" if ARCH_ALPHA
	191
	192	config PROC_EV68
	193	bool "EV68 Series" if ARCH_ALPHA
	194
	195	config PROC_ARM
	196	bool "Generic arm, little endian" if ARCH_ARM
	197
	198	config PROC_ARM5L
	199	bool "Generic arm, version 5, little endian" if ARCH_ARM
	200
	201	config PROC_ARM5B
	202	bool "Generic arm, version 5, big endian" if ARCH_ARM
	203
	204	config PROC_ULTRA1
	205	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	206
	207	config PROC_ULTRA2
	208	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	209
	210	config PROC_ULTRA3
	211	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[613d46b]	212	endchoice
	213
[9c9775f]	214	choice
	215	prompt "MIPS 64 ABI"
	216	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
	217	default ABI_64
	218	help
	219	#-- Choose the target system ABI to use
[613d46b]	220
[9c9775f]	221	config ABI_32
	222	bool "o32"
	223
	224	config ABI_N32
	225	bool "n32"
	226
	227	config ABI_64
	228	bool "n64"
	229	endchoice
[613d46b]	230
	231	config TARGET
	232	string
[9c9775f]	233	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	234	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	235	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
	236
	237	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	238	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	239	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
	240
	241	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
	242
	243	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	244	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	245	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	246	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
	247
	248	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
	249	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
	250	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	251	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
	252
	253	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	254	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && DATA_MULTI
	255
	256	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	257	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	258
	259	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
	260	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	261	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
[056486c]	262
[9c9775f]	263	default "arm-unknown-linux-gnu" if ARCH_ARM && BOOK_CLFS2
	264
	265	default "arm-unknown-linux-uclibc" if PROC_ARM
	266	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	267	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
	268
	269	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	270	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	271	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	272	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	273	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	274	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	275	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	276	default "alphaev68-unknown-linux-gnu" if PROC_EV68
[613d46b]	277
	278	config TARGET32
	279	string
	280	depends DATA_MULTI
	281	default "i686-pc-linux-gnu" if ARCH_X86
[9c9775f]	282	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	283	default "mips-unknown-linux-gnu" if PROC_mips
[613d46b]	284	default "sparc-unknown-linux-gnu" if ARCH_SPARC
[056486c]	285	default "powerpc-unknown-linux-gnu" if ARCH_PPC
[613d46b]	286
[9c9775f]	287	config PLATFORM
	288	string
	289	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	290	default "WRT - Wireless Router" if PLATFORM_WRT
	291
	292	config SPARC64_PROC
[613d46b]	293	string
[9c9775f]	294	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	295	default "1" if PROC_ULTRA1
	296	default "2" if PROC_ULTRA2
	297	default "3" if PROC_ULTRA3
[056486c]	298
[613d46b]	299	config ARCH
	300	string
[9c9775f]	301	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	302	default "x86_64" if ARCH_X86 && DATA_MULTI
	303	default "x86_64-64" if ARCH_X86 && DATA_64
	304
	305	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	306
	307	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	308	default "mips64" if ARCH_MIPS && DATA_MULTI
	309	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
	310
	311
	312	default "ppc" if ARCH_PPC && DATA_32
	313	default "ppc64" if ARCH_PPC && DATA_MULTI
	314
	315	default "sparc" if ARCH_SPARC && DATA_32
	316	default "sparc64" if ARCH_SPARC && DATA_MULTI
	317	default "sparc64-64" if ARCH_SPARC && DATA_64
	318
[613d46b]	319	default "alpha" if ARCH_ALPHA
[9c9775f]	320	default "arm" if ARCH_ARM
	321	default "hppa" if ARCH_HPPA
[056486c]	322
[9c9775f]	323	config MIPS_LEVEL
[613d46b]	324	string
[9c9775f]	325	depends BOOK_CLFS3 && ARCH_MIPS
	326	default "1" if DATA_32
	327	default "3" if DATA_64
	328
	329	config ABI
	330	string
	331	depends BOOK_CLFS3
	332	default "-m32" if ARCH_X86 \|\| ARCH_ARM
	333	# default "-m64" if NO USED YET IN THE BOOK
	334	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	335	default "-mabi=n32" if ABI_N32
	336	default "-mabi=64" if ABI_64
	337
	338	config ENDIAN
	339	string
	340	depends BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
	341	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	342	default "big" if PROC_mips \|\| PROC_ARM5B
[613d46b]	343
	344	choice
	345	prompt "Build method"
	346	depends BOOK_CLFS
	347	help
[3b0fb28]	348	#-- What build method should be used: a chroot jail or minimal boot system
	349	# Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for a full explanation.
	350
[613d46b]	351	config BUILD_CHROOT
	352	bool "chroot"
[3b0fb28]	353
[613d46b]	354	config BUILD_BOOT
[056486c]	355	bool "boot"
[613d46b]	356	endchoice
[3b0fb28]	357
[613d46b]	358	config METHOD
	359	string
	360	default "chroot" if BUILD_CHROOT
[a181405]	361	default "boot" if BUILD_BOOT
[056486c]	362
[613d46b]	363	config BOOT_CONFIG
[65a2be6]	364	string "BOOT kernel config file (mandatory)"
[725ae5a]	365	default "*EDIT ME*"
[613d46b]	366	depends on BUILD_BOOT
	367	help
[3b0fb28]	368	#-- If METHOD=boot, location of boot-kernel config file
	369	# The config file will be copied to ${BUILD_DIR}/sources
	370	# and renamed 'bootkernel-config'
	371	#
	372	# NOTE: this setting is required
	373	#--- End CLFS specific params
[613d46b]	374
[3b0fb28]	375	#--- HLFS specific params
[613d46b]	376	config GRSECURITY_HOST
	377	bool "Building on grsecurity enabled host?"
	378	default n
	379	depends on BOOK_HLFS
	380	help
[3b0fb28]	381	#-- If your build system has grsecurity patches applied
	382	# you MUST enable this switch.
[613d46b]	383
	384	choice
	385	prompt "Library"
	386	depends on BOOK_HLFS
	387	help
[3b0fb28]	388	#-- Which library model to use: uClibc/glibc
	389
[613d46b]	390	config LIB_GLIBC
	391	bool "glibc"
[3b0fb28]	392
[613d46b]	393	config LIB_UCLIBC
	394	bool "uClibc"
	395	endchoice
[3b0fb28]	396
[613d46b]	397	config MODEL
	398	depends on BOOK_HLFS
	399	string
	400	default "glibc" if LIB_GLIBC
	401	default "uclibc" if LIB_UCLIBC
[9c9775f]	402
	403	choice
	404	prompt "Kernel series"
	405	depends on BOOK_HLFS
	406	help
	407	#-- Which kernel series to use: 2.6/2.4
	408
	409	config KERNEL_26
	410	bool "2.6 kernel series"
	411
	412	config KERNEL_24
	413	bool "2.4 kernel series"
	414	endchoice
	415
	416	config KERNEL
	417	depends on BOOK_HLFS
	418	string
	419	default "2.6" if KERNEL_26
	420	default "2.4" if KERNEL_24
	421
	422	# menu "HLFS Additional Features"
	423	# depends on BOOK_HLFS
	424	#
	425	# config SET_SSP
	426	# bool "Stack-smashing protector"
	427	# default y
	428	#
	429	# config SET_ASLR
	430	# bool "Address-space layout randomization"
	431	# default y
	432	#
	433	# config SET_PAX
	434	# bool "PaX-aware ELF executables and kernel"
	435	# default y
	436	#
	437	# config SET_HARDENED_TMP
	438	# bool "Hardened temporary files creation"
	439	# default y
	440	#
	441	# config SET_WARNINGS
	442	# bool "Additional warnings"
	443	# default y
	444	#
	445	# config SET_MISC
	446	# bool "Miscellaneous features"
	447	# default y
	448	#
	449	# config SET_BLOWFISH
	450	# bool "Blowfish passwords"
	451	# default y
	452	# endmenu
	453
	454	config SSP
	455	# depends on SET_SSP
	456	string
	457	default ",ssp,"
	458
	459	config ASLR
	460	# depends on SET_ASLR
	461	string
	462	default ",aslr,"
	463
	464	config PAX
	465	# depends on SET_PAX
	466	string
	467	default ",pax,"
	468
	469	config HARDENED_TMP
	470	# depends on SET_HARDENED_TMP
	471	string
	472	default ",hardened_tmp,"
	473
	474	config WARNINGS
	475	# depends on SET_WARNINGS
	476	string
	477	default ",warnings,"
	478
	479	config MISC
	480	# depends on SET_MISC
	481	string
	482	default ",misc,"
	483
	484	config BLOWFISH
	485	# depends on SET_BLOWFISH
	486	string
	487	default ",blowfish,"
[3b0fb28]	488	#--- End HLFS specific params
[613d46b]	489
[9c9775f]	490	#--- Custom Tools support
	491	config CUSTOM_TOOLS
	492	bool "Add custom tools support"
	493	default n
	494	depends on !BOOK_BLFS
	495	help
	496	#--- Activating this option additional packages you create
	497	# will be installed after finished the xLFS system build.
	498	#
	499	#--- End Custom Tools support
	500
[cfdc0f1]	501	#--- blfs-tool Support
	502	config BLFS_TOOL
	503	bool "Add blfs-tool support"
	504	default n
[9c9775f]	505	depends on !BOOK_BLFS && !BOOK_CLFS3
[cfdc0f1]	506	help
[9c9775f]	507	#--- Activating this option will install additional
	508	# packages needed to use blfs-tool when booting
	509	# the new system.
[cfdc0f1]	510	#
	511	# The blfs-tool files will be installed under
	512	# $BUILD_DIR/blfs_root.
	513
	514	# After booting the new xLFS system you should to
[9c9775f]	515	# create an user account and move the /blfs-root
[cfdc0f1]	516	# directory to the user's home, making he the
	517	# directory and files owner, before start
	518	# using blfs-tool.
	519	#
[2ee1d11]	520	# Also, be sure to bring to that user read and write
	521	# privileges over the $TRACKING_DIR directory and
	522	# the files that it contains.
[cfdc0f1]	523	#
	524	# And don't forget to configure sudo properly.
	525
	526	choice
	527	prompt "BLFS Release"
	528	default BLFS_SVN
	529	depends on BLFS_TOOL
	530	config BLFS_SVN
	531	bool "BLFS SVN"
	532	help
	533	#-- Current development version as in trunk
	534
	535	config BLFS_BRANCH
	536	bool "BLFS Branch or stable book"
	537	help
	538	#-- A supported SVN branch or stable released book
	539	endchoice
	540
	541	config BLFS_BRANCH_ID
	542	string "BLFS Book Version (mandatory)"
	543	default "EDIT ME"
	544	depends on BLFS_BRANCH
	545	help
	546	#-- A list of valid branches and stable books ID's is available here.
	547	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	548
	549	menu "blfs-tool dependencies"
	550	depends on BLFS_TOOL
	551
	552	config DEP_LIBXML
	553	bool "libxml2 (required)"
	554	default y
	555
	556	config DEP_LIBXSLT
	557	bool "libxslt (required)"
	558	default y
	559
[2020b1b]	560	config DEP_TIDY
	561	bool "tidy (required)"
	562	default y
	563
	564	config DEP_DBXML
	565	bool "DocBook XML DTD (required)"
	566	default y
	567
	568	config DEP_UNZIP
	569	bool "UnZip (required to install DocBook XML DTD)"
	570	default y
	571	depends on DEP_DBXML
	572
[9c9775f]	573	#config DEP_DBXSL
	574	#bool "DocBook XSL (required)"
	575	#default y
[cfdc0f1]	576
[9c9775f]	577	config DEP_LYNX
	578	bool "lynx (required)"
[cfdc0f1]	579	default y
	580
	581	config DEP_SUDO
	582	bool "sudo (recommended)"
	583	default y
	584
	585	config DEP_WGET
	586	bool "wget (recommended)"
	587	default y
	588
	589	config DEP_GPM
	590	bool "GPM (optional, see help)"
	591	default y
	592	help
	593	#-- You MUST to install manually the gpm bootscript
[9c9775f]	594	# and create its configuration file.
	595	#
	596	# An alternative is to unselect this option and
	597	# install gpm, its configuration file, and its
	598	# bootscript using the custom tools support.
	599
	600	config DEP_SVN
	601	bool "SVN client (optional, see help)"
	602	default n
	603	help
	604	#-- Subversion-1.3.1 will be installed. This version is
	605	# old but does not rely on additional packages to be
	606	# built.
	607	#
	608	# If you are happy with this old version and don't
	609	# need extra features, select this option.
[cfdc0f1]	610	endmenu
	611	#--- End blfs-tool Support
	612
[00f4966]	613	#--- BLFS specific params
	614	config BLFS_ROOT
	615	string "Directory root"
[cfdc0f1]	616	default "$HOME/blfs_root" if BOOK_BLFS
[9425fd9]	617	default "/blfs_root" if BLFS_TOOL
[cfdc0f1]	618	depends on BOOK_BLFS \|\| BLFS_TOOL
[00f4966]	619	help
	620	#-- Full path to the directory where all required
	621	# files and scripts will be stored.
	622
	623	config BLFS_XML
	624	string "BLFS sources directory"
	625	default "blfs-xml"
[cfdc0f1]	626	depends on BOOK_BLFS \|\| BLFS_TOOL
[00f4966]	627	help
[cfdc0f1]	628	#-- The directory name under $BLFS_ROOT where BLFS book
	629	# sources will be checkout.
[2d0a2e5]	630
	631	config TRACKING_DIR
	632	string "Installed packages database directory"
	633	default "/var/lib/jhalfs/BLFS"
[9c9775f]	634	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
[2d0a2e5]	635	help
	636	#-- Full path to the directory where the installed
	637	# packages database will be created.
	638	#
[9c9775f]	639	# If you are installing blfs-tool on a running xLFS system
	640	# you MUST to create manually this directory.
	641	#
	642	# If you are installing blfs-tool as part of a xLFS build
	643	# and/or using the customized scripts feature, you will
	644	# need to fix that directory permissions after booting
	645	# the new system.
[cfdc0f1]	646	#
[2d0a2e5]	647	# Note that the user that will build the packages must
	648	# have read and write privileges on that directory.
[00f4966]	649	#--- End BLFS specific params
[9c9775f]	650
[3b0fb28]	651	#--- End BOOK Settings
	652	endmenu
[613d46b]	653
[3b0fb28]	654	menu "--- General Settings"
[00f4966]	655	depends on !BOOK_BLFS
[3b0fb28]	656
	657	#--- Set User Account
	658	config CONFIG_USER
[9c9775f]	659	bool "Change the default user/group and homedir for this build"
[3b0fb28]	660	default n
	661	help #-- Unprivileged user and group name
	662	# If you do not have the priv to create/delete
	663	# users and groups you can specifiy your own
	664	# user id for the build
	665	#
	666	# default values for each book
[9c9775f]	667	# LFS lfs
	668	# CLFS* clfs
	669	# HLFS hlfs
	670	#
	671	# Also, if your host place users home dirs into a
	672	# directory other than /home you can specify it here.
[3b0fb28]	673
	674	config DEF_USER
	675	string
	676	default "lfs" if BOOK_LFS
[9c9775f]	677	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[3b0fb28]	678	default "hlfs" if BOOK_HLFS
	679
	680	config SET_USER
	681	string "User account"
	682	depends CONFIG_USER
	683	default DEF_USER
	684
	685	config CONFIG_GROUP
	686	bool "Set Group?"
	687	default n
	688	depends CONFIG_USER
	689
	690	config SET_GROUP
	691	string "GROUP account"
	692	depends CONFIG_GROUP
	693	default DEF_USER
	694
[9c9775f]	695	config CONFIG_HOME
	696	bool "Set home dir?"
	697	default n
	698	depends CONFIG_USER
	699
	700	config SET_HOME
	701	string "Path to the directory where user home dir will be created"
	702	depends CONFIG_HOME
	703	default "/home"
	704
[3b0fb28]	705	config LUSER
	706	string
	707	default DEF_USER if !CONFIG_USER
	708	default SET_USER if CONFIG_USER
	709
	710	config LGROUP
	711	string
	712	default LUSER if !CONFIG_GROUP
	713	default SET_GROUP if CONFIG_GROUP
[9c9775f]	714
	715	config LHOME
	716	string
	717	default "/home" if !CONFIG_HOME
	718	default SET_HOME if CONFIG_HOME
[3b0fb28]	719	#--- End Set User Account
[613d46b]	720
[cbe3f2b]	721	config BUILDDIR
	722	string "Build Directory"
	723	default "/mnt/build_dir"
	724	help
[3b0fb28]	725	#-- The directory where the created system will be located.
[9c9775f]	726	# NOTE: A working directory named jhalfs will be created
	727	# here, so ensure this does not conflict with the jhalfs
	728	# source directory.
[613d46b]	729
[47fddc8]	730	config GETPKG
[613d46b]	731	bool "Retrieve source files"
	732	default n
	733	help
[3b0fb28]	734	#-- Download all packages and patches required by the book selected
	735	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	736	# first and if necessary retrieve them from the 'net.
	737	# Files will be transfered to $BUILDDIR/sources.
	738
	739	config SRC_ARCHIVE
	740	string "Package Archive Directory"
	741	default "$SRC_ARCHIVE"
[47fddc8]	742	depends GETPKG
[3b0fb28]	743	help
	744	#-- A local archive for packages/file (not $BUILDDIR/sources)
	745	# Used only if GETPKG = 1
	746	# Any missing file will be downloaded and archived here,
	747	# if the user has the right priviledges.
[613d46b]	748
[3c96826]	749	config SERVER
	750	string "FTP mirror"
	751	default "ftp://ftp.lfs-matrix.net"
	752	depends GETPKG
	753	help
	754	#-- FTP mirror to download packages and patches if not found
	755	# in $SRC_ARCHIVE
	756	# As a last resort, the files will dowloaded from upstream,
	757	# if possible.
	758
[47fddc8]	759	config GETKERNEL
[2ee1d11]	760	bool "Always retrieve kernel package (see help)"
[9c9775f]	761	default y if BOOK_LFS \|\| BOOK_HLFS
[47fddc8]	762	depends GETPKG
[613d46b]	763	help
[2ee1d11]	764	#-- Get the kernel package and patches even if no kernel
	765	# configuration file has been supplied.
	766
	767	# NOTE:
	768	# The kernel package must be available when building
[9c9775f]	769	# the SVN version of LFS or HLFS to can install the
	770	# headers files.
	771	#
	772	# If building LFS-6.2 this setting can be disabled.
[613d46b]	773
[47fddc8]	774	config RUNMAKE
[21dab83]	775	bool "Run the makefile"
[613d46b]	776	default n
	777	help
[3b0fb28]	778	#-- Automatically run the makefile once it has been created
[613d46b]	779
[47fddc8]	780	config CLEAN
[21dab83]	781	bool "Rebuild files"
	782	default n
	783	help
[3b0fb28]	784	#-- Clean the build directory before performing any other task.
	785	# The directory is cleaned only if it was populated by a
	786	# previous JHALFS run.
[056486c]	787	#
[613d46b]	788
[3b0fb28]	789	#--- End General Settings
	790	endmenu
[056486c]	791
[3b0fb28]	792	menu "--- Build Settings"
[00f4966]	793	depends on !BOOK_BLFS
[613d46b]	794
[3b0fb28]	795	#--- Test Suites
[613d46b]	796	config CONFIG_TESTS
	797	bool "Run testsuites"
[9c9775f]	798	depends !BOOK_CLFS2 && !BOOK_CLFS3
[1b99a8b]	799	default y
[613d46b]	800	help
[3b0fb28]	801	#-- Run test suites
[623643e]	802	#
	803	# You will can to select between:
	804	#
	805	# - Only final system Glibc, GCC and Binutils testsuites
	806	# - All final system testsuites
	807	# - Both temporary tools and final system testsuites
	808	#
	809	# HLFS and CLFS has no testsuites available in the
[33c34c9]	810	# temporary tools phase
[623643e]	811
	812	# You will be promt also about the "flavour" of the
	813	# testsuites run:
	814	#
	815	# - Don't stop on test suite failures
	816	# - Abort the build at the first test suite failure
[056486c]	817	#
	818
[3b0fb28]	819	choice
[ed339567]	820	prompt "Tests level"
[623643e]	821	depends CONFIG_TESTS
[613d46b]	822	default TEST_1
[056486c]	823
[613d46b]	824	config TST_1
[623643e]	825	bool "Only final system Glibc, GCC and Binutils testsuites"
[3b0fb28]	826
[613d46b]	827	config TST_2
[623643e]	828	bool "All final system testsuites"
[3b0fb28]	829
[613d46b]	830	config TST_3
[623643e]	831	bool "Both temporary tools and final system testsuites" if !BOOK_HLFS && !BOOK_CLFS
[3b0fb28]	832	endchoice
	833
	834	config TEST
[613d46b]	835	int
[21dab83]	836	default "0" if !CONFIG_TESTS
[613d46b]	837	default "1" if TST_1
	838	default "2" if TST_2
	839	default "3" if TST_3
[3b0fb28]	840
[1b99a8b]	841	choice
[ed339567]	842	prompt "Flavour"
[623643e]	843	depends CONFIG_TESTS
[056486c]	844
	845	config NO_BOMB
	846	bool "Don't stop on test suite failures"
[3b0fb28]	847
[056486c]	848	config BOMB
	849	bool "Abort the build at the first test suite failure"
[3b0fb28]	850	endchoice
	851
	852	config BOMB_TEST
[47fddc8]	853	bool
[ed339567]	854	default n if NO_BOMB
	855	default y if BOMB
[47fddc8]	856
[3b0fb28]	857	#--- End Test Suites
[613d46b]	858
[9c9775f]	859	#--- Installed files logs
	860	config INSTALL_LOG
	861	bool "Create installed files logs"
	862	default n
	863	help
	864	#-- Select this if you want to create logs of the files
	865	# installed by each package on the final system.
	866
	867	#--- End Installed files logs
	868
[3b0fb28]	869	#--- FSTAB
	870	config HAVE_FSTAB
	871	bool "Use a custom fstab file"
	872	default n
	873	help
	874	#-- Select this if you have ready a proper fstab file
	875
	876	config FSTAB
	877	string "Fstab file (optional)"
	878	default "*EDIT ME*"
	879	depends on HAVE_FSTAB
	880	help
	881	#-- The location of fstab file (if empty, a template is created)
	882	#--- End FSTAB
	883
	884	#--- Kernel
	885	config CONFIG_BUILD_KERNEL
	886	bool "Build the kernel"
	887	default n
	888	help
	889	#-- Select this option if you wish to build the kernel.
	890	#
	891	# You will be prompted for the full path to the .config
	892	# file. It will be copied to the 'sources' directory and
	893	# rename kernel-config
	894
	895	config CONFIG
	896	string "Kernel config file"
	897	default "*EDIT ME*"
	898	depends on CONFIG_BUILD_KERNEL
	899	help
	900	#-- Fully qualified path to a kernel config file
	901	# The config file will be copied to ${BUILD_DIR}/sources
	902	# and renamed 'kernel-config'
	903	#--- End Kernel
	904
[47fddc8]	905	config STRIP
[3b0fb28]	906	bool "Strip Installed Binaries/Libraries"
[613d46b]	907	default y
[9c9775f]	908	depends on !BOOK_CLFS3
[613d46b]	909
[47fddc8]	910	config VIMLANG
[3b0fb28]	911	bool "Install vim-lang package"
	912	default y
[9c9775f]	913	depends on !BOOK_HLFS && !BOOK_CLFS3
[3b0fb28]	914	help
[1b99a8b]	915	#-- Install the optional vim-lang package
[3b0fb28]	916
[613d46b]	917	config TIMEZONE
	918	string "TimeZone"
[33c34c9]	919	default "GMT"
[613d46b]	920	help
[33c34c9]	921	#-- The timezone as output by tzselect
	922	# This will be copied to /etc/localtime
[613d46b]	923
	924	config LANG
	925	string "Language"
	926	default "$LANG"
	927	help
[3b0fb28]	928	#-- Language information in /etc/profile See <locale -a> for values
[613d46b]	929
[3b0fb28]	930	#--- Groff page
[613d46b]	931	choice
	932	prompt "Groff page size"
	933	default PAGE_LETTER
	934	help
[3b0fb28]	935	#-- Page definition for groff: letter or A4
[056486c]	936
[613d46b]	937	config PAGE_LETTER
	938	bool "letter"
[3b0fb28]	939
[613d46b]	940	config PAGE_A4
	941	bool "A4"
	942	endchoice
[3b0fb28]	943
[613d46b]	944	config PAGE
	945	string
	946	default "letter" if PAGE_LETTER
	947	default "A4" if PAGE_A4
[3b0fb28]	948	#--- End Groff page
[613d46b]	949
[3b0fb28]	950	#--- End Build Settings
	951	endmenu
	952
	953	menu "--- Advanced Features"
[00f4966]	954	depends on !BOOK_BLFS
[3b0fb28]	955
[47fddc8]	956	config REPORT
[3b0fb28]	957	bool "Create SBU and disk usage report"
	958	default y
	959
	960	#--- ICA/farce
[47fddc8]	961	config COMPARE
[3b0fb28]	962	bool "Run comparison analysis on final stage"
[9c9775f]	963	depends !BOOK_CLFS2 && !BOOK_CLFS3
[3b0fb28]	964	default n
[613d46b]	965	help
[3b0fb28]	966	#-- Should some iterative comparison analysis by made?
	967	#
	968	# Unless you are familiar with ICA and/or FARCE do not
	969	# select this option
	970	#
	971	# ICA and FARCE are analysis tools for comparing one
	972	# build to the next. Builds mays differ from one iteration
	973	# to another due to the build order and these tools try
	974	# to ferret out those differences by examining the stored
	975	# build logs and binary files.
	976	#
	977	# The scripts are well commented and can be found in ./extras/*
	978	#
	979
	980	config ITERATIONS
[47fddc8]	981	int "Number of test runs (2,3,4,5)" if COMPARE
	982	depends on COMPARE
[3b0fb28]	983	range 2 5
	984	default 3
	985
[47fddc8]	986	config RUN_ICA
[3b0fb28]	987	bool "ICA testing"
[47fddc8]	988	depends on COMPARE
[3b0fb28]	989	default y
[613d46b]	990	help
[3b0fb28]	991	#-- Run ICA testing
[613d46b]	992
[47fddc8]	993	config RUN_FARCE
[3b0fb28]	994	bool "farce testing"
[47fddc8]	995	depends on COMPARE
[3b0fb28]	996	default n
	997	help
	998	#-- Run farce testing
	999	#--- End ICA/farce
	1000
[3c96826]	1001	#--- Optimizations
[9c9775f]	1002	if !BOOK_CLFS2 && !BOOK_CLFS3
[3b0fb28]	1003	config CONFIG_OPTIMIZE
[3c96826]	1004	bool "Use optimization (see help)"
[cbe3f2b]	1005	default n
	1006	help
[3b0fb28]	1007	#-- Actual optimzation flags MUST be defined in ./optimize/*
	1008	# files before activate this option.
[cbe3f2b]	1009	#
[3b0fb28]	1010	# WARNING: The use of build optimizations may be dangerous.
	1011	# You should know what you are doing and be sure that the
	1012	# optimization settings listed below are what you want.
	1013	# It there are build issues or the system doesn't work as
	1014	# expected, please rebuild without optimizations before
	1015	# asking for support.
[613d46b]	1016
[3b0fb28]	1017	choice
	1018	prompt "Optimization level "
	1019	default OPT_1
	1020	depends CONFIG_OPTIMIZE
[613d46b]	1021	help
[3b0fb28]	1022	#-- Optimization values are set in optimize/* files
	1023
	1024	config OPT_1
	1025	bool "Final system only"
	1026
	1027	config OPT_2
	1028	bool "Both temp tools and final system"
	1029	endchoice
	1030
	1031	config OPTIMIZE
	1032	int
	1033	default "0" if !CONFIG_OPTIMIZE
	1034	default "1" if OPT_1
	1035	default "2" if OPT_2
[7d4cc81]	1036	endif
[3b0fb28]	1037	#--- End Optimizations
	1038
[3c96826]	1039	#-- Internal Settings
	1040	menu "--- Internal Settings (WARNING: for jhalfs developers only)"
	1041
	1042	config SCRIPT_ROOT
	1043	string "Scripts root"
	1044	default "jhalfs"
	1045
	1046	config JHALFSDIR
	1047	string "jhalfs directory"
	1048	default "$BUILDDIR/$SCRIPT_ROOT"
	1049
[9c9775f]	1050	config LOGDIRBASE
	1051	string "Build logs directory basename"
	1052	default "logs"
	1053
[3c96826]	1054	config LOGDIR
	1055	string "Build logs directory"
[9c9775f]	1056	default "$JHALFSDIR/$LOGDIRBASE"
	1057
	1058	config TESTLOGDIRBASE
	1059	string "Test suites logs directory basename"
	1060	default "test-logs"
[3c96826]	1061
	1062	config TESTLOGDIR
	1063	string "Test suites logs directory"
[9c9775f]	1064	default "$JHALFSDIR/$TESTLOGDIRBASE"
	1065
	1066	config FILELOGDIRBASE
	1067	string "Installed files logs directory basename"
	1068	default "installed-files"
	1069
	1070	config FILELOGDIR
	1071	string "Installed files logs directory"
	1072	default "$JHALFSDIR/$FILELOGDIRBASE"
[3c96826]	1073
	1074	config ICALOGDIR
	1075	string "ICA logs directory"
	1076	default "$LOGDIR/ICA"
	1077
	1078	config FARCELOGDIR
	1079	string "farce logs directory"
	1080	default "$LOGDIR/farce"
	1081
	1082	config MKFILE
	1083	string "Makefile"
	1084	default "$JHALFSDIR/Makefile"
	1085
	1086	config XSL
	1087	string "XSL stylesheet"
	1088	default "$PROGNAME.xsl"
	1089
	1090	config PKG_LST
	1091	string "Package contents list"
	1092	default "unpacked"
	1093
	1094	#--- End Internal Settings
	1095	endmenu
	1096
[3b0fb28]	1097	#--- End Advanced Features
	1098	endmenu
[9c9775f]	1099
	1100	config REBUILD_MAKEFILE
	1101	bool "Rebuild the Makefile (see help)"
	1102	default n
	1103	depends on !BOOK_BLFS
	1104	help
	1105	#-- Rebuild the Makefile
	1106	#
	1107	# This option alow to rebuild the Makefile after
	1108	# customizing the base system build scripts.
	1109	#
	1110	# See README.CUSTOM for more info about this feature.
	1111

Note: See TracBrowser for help on using the repository browser.

Download in other formats: