Context Navigation

source: Config.in@ 5451eae

ablfs-more legacy trunk

Last change on this file since 5451eae was 30a8961, checked in by Pierre Labastie <pierre@…>, 5 years ago
Fix the TEST variable when CONFIG_TESTS is not set: This is another bug exposed by the new menu system. The TEST variable was set inside the menu "test settings". But this menu depends on CONFIG_TESTS, and is not executed if CONFIG_TESTS is not set. So that, the TEST variable was not set if CONFIG_TESTS was not set (while with the former menu suystem, it was set to 0). Due to the logic in lfs.xsl, this resulted in all the tests being run, instead of none... Move the setting of the TEST variable outside the "test settings" menu.
Property mode set to `100644`
File size: 40.5 KB

Rev	Line
[aa283c0]	1	# $Id$
[e5d44f5]	2	menu "BOOK Settings"
	3
	4	#--- BOOK/script
	5	choice
	6	prompt "Use BOOK"
	7	default BOOK_LFS
	8	help
	9	Select the book where build instructions are retrieved.
	10
	11	config BOOK_LFS
	12	bool "Linux From Scratch System V"
	13	help
	14	Set up the tools to build LFS with Sys V init.
	15
	16	config BOOK_LFS_SYSD
	17	bool "Linux From Scratch systemd"
	18	help
	19	Set up the tools to build LFS with systemd init.
	20
	21	config BOOK_CLFS
	22	bool "Cross-Compiled Linux From Scratch"
	23	help
	24	Set up the tools to build CLFS.
	25
	26	config BOOK_CLFS2
	27	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
	28	help
	29	Set up the tools to build CLFS by the sysroot method.
	30
	31	config BOOK_CLFS3
	32	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
	33	help
	34	Set up the tools to build CLFS with tools for embedded systems.
	35
	36	config BOOK_BLFS
	37	bool "Beyond Linux From Scratch (see help)"
	38	help
	39	if the (C)LFS system has already been built, install the tools
	40	to build BLFS packages.
	41	endchoice
	42
[39dc04a]	43	choice
[f596dde]	44	depends on BOOK_BLFS
[39dc04a]	45	prompt "Init system"
	46
	47	config BLFS_SYSV
	48	bool "BLFS Sys V"
	49	help
	50	Extract the Sys V flavour of the BLFS book
	51
	52	config BLFS_SYSD
	53	bool "BLFS systemd"
	54	help
	55	Extract the systemd flavour of the BLFS book
	56
	57	endchoice
	58
[e5d44f5]	59	config INITSYS
	60	string
[39dc04a]	61	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	62	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	63
	64	config PROGNAME
	65	string
	66	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	67	default "clfs" if BOOK_CLFS
	68	default "clfs2" if BOOK_CLFS2
	69	default "clfs3" if BOOK_CLFS3
	70
	71	config RUN_ME
	72	string
	73	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_CLFS \|\| \
	74	BOOK_CLFS2 \|\| BOOK_CLFS_3
	75	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	76	#--- End BOOK/script
	77
	78	#--- Book version
	79	choice
	80	prompt "Release"
	81	default relSVN if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_BLFS
	82	default relGIT if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	83
	84	config relSVN
	85	bool "SVN"
	86	depends on BOOK_LFS \|\| BOOK_BLFS \|\| BOOK_LFS_SYSD
	87	help
	88	Current development version as in trunk
	89
	90	config relGIT
	91	bool "GIT"
	92	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	93	help
	94	Current development git master branch
	95
	96	config WORKING_COPY
	97	bool "Working Copy"
	98	help
	99	A local working copy
	100
	101	config BRANCH
	102	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
	103	help
	104	A supported SVN/GIT branch or stable released book
	105	endchoice
	106
	107	config BRANCH_ID
	108	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	109	default "EDIT ME"
[f596dde]	110	depends on BRANCH
[e5d44f5]	111	help
	112	A list of valid branches and stable book IDs is available at
	113	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	114
	115	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	116	YYY version.
	117
	118	config BOOK
	119	string "Loc of working copy (mandatory)"
	120	default "EDIT ME"
[f596dde]	121	depends on WORKING_COPY
[e5d44f5]	122	help
	123	The full path to a local copy of the book XML sources
	124
	125	#--- End BOOK version
	126
	127	#--- CLFS specific params
	128	choice
	129	prompt "Target architecture"
	130	default ARCH_X86
[f596dde]	131	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[e5d44f5]	132	help
	133	Choose the target system base architecture
	134
	135	config ARCH_X86
	136	bool "x86"
	137
	138	config ARCH_MIPS
	139	bool "mips" if !BOOK_CLFS2
	140
	141	config ARCH_PPC
	142	bool "ppc" if BOOK_CLFS
	143
	144	config ARCH_SPARC
	145	bool "sparc" if BOOK_CLFS
	146
	147	config ARCH_ALPHA
	148	bool "alpha" if !BOOK_CLFS3
	149
	150	config ARCH_ARM
	151	bool "arm" if !BOOK_CLFS
	152
	153	config ARCH_HPPA
	154	bool "hppa" if BOOK_CLFS2
	155	endchoice
	156
	157	choice
	158	prompt "Hardware Platform"
[f596dde]	159	depends on BOOK_CLFS3 && ARCH_MIPS
[e5d44f5]	160	default PLATFORM_GENERIC
	161	help
	162	Choose a destination platform
	163	Platform specific files will be included
	164
	165	config PLATFORM_GENERIC
	166	bool "Generic platform"
	167
	168	config PLATFORM_WRT
	169	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	170	endchoice
	171
	172	choice
	173	prompt "Library"
[f596dde]	174	depends on (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
[e5d44f5]	175	default DATA_32
	176	help
	177	Choose the target system libraries type
	178
	179	config DATA_32
	180	bool "32-bit"
[a705708]	181
[e5d44f5]	182	config DATA_64
	183	bool "64-bit"
	184
	185	config DATA_MULTI
	186	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
	187	endchoice
[a705708]	188
[e5d44f5]	189	choice
	190	prompt "Processor type"
[f596dde]	191	depends on (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
[e5d44f5]	192	help
	193	Choose the target system processor
[a705708]	194
[e5d44f5]	195	config PROC_i486
	196	bool "486 Compatibles" if ARCH_X86
[a705708]	197
[e5d44f5]	198	config PROC_i586
	199	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	200
[e5d44f5]	201	config PROC_i686
	202	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	203
[e5d44f5]	204	config PROC_mipsel
	205	bool "MIPS Little Endian" if ARCH_MIPS
[2035ea1]	206
[e5d44f5]	207	config PROC_mips
	208	bool "MIPS Big Endian" if ARCH_MIPS
[2035ea1]	209
[e5d44f5]	210	config PROC_unknown
	211	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	212
[e5d44f5]	213	config PROC_hppa1
	214	bool "PA 7000 Series" if ARCH_HPPA
[c560e9a]	215
[e5d44f5]	216	config PROC_hppa2
	217	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	218
[e5d44f5]	219	config PROC_EV5
	220	bool "EV5 Series" if ARCH_ALPHA
[c560e9a]	221
[e5d44f5]	222	config PROC_EV56
	223	bool "EV56 Series" if ARCH_ALPHA
[c560e9a]	224
[e5d44f5]	225	config PROC_PCA56
	226	bool "PCA56 Series" if ARCH_ALPHA
[c560e9a]	227
[e5d44f5]	228	config PROC_PCA57
	229	bool "PCA57 Series" if ARCH_ALPHA
[c560e9a]	230
[e5d44f5]	231	config PROC_EV6
	232	bool "EV6 Series" if ARCH_ALPHA
[c560e9a]	233
[e5d44f5]	234	config PROC_EV67
	235	bool "EV67 Series" if ARCH_ALPHA
[a87e07a]	236
[e5d44f5]	237	config PROC_EV68
	238	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	239
[e5d44f5]	240	config PROC_ARM
	241	bool "Generic arm, little endian" if ARCH_ARM
[a87e07a]	242
[e5d44f5]	243	config PROC_ARM5L
	244	bool "Generic arm, version 5, little endian" if ARCH_ARM
[650acce]	245
[e5d44f5]	246	config PROC_ARM5B
	247	bool "Generic arm, version 5, big endian" if ARCH_ARM
[650acce]	248
[e5d44f5]	249	config PROC_ULTRA1
	250	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[650acce]	251
[e5d44f5]	252	config PROC_ULTRA2
	253	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[a705708]	254
[e5d44f5]	255	config PROC_ULTRA3
	256	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	257	endchoice
[c63c0fa]	258
[e5d44f5]	259	choice
	260	prompt "MIPS 64 ABI"
[f596dde]	261	depends on BOOK_CLFS3 && ARCH_MIPS && DATA_64
[e5d44f5]	262	default ABI_64
	263	help
	264	Choose the target system ABI to use
[c63c0fa]	265
[e5d44f5]	266	config ABI_32
	267	bool "o32"
[c63c0fa]	268
[e5d44f5]	269	config ABI_N32
	270	bool "n32"
[c63c0fa]	271
[e5d44f5]	272	config ABI_64
	273	bool "n64"
	274	endchoice
[c5ff430]	275
[e5d44f5]	276	config TARGET
	277	string
	278	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	279	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	280	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[2639f65]	281
[e5d44f5]	282	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	283	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	284	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	285
[e5d44f5]	286	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[a705708]	287
[e5d44f5]	288	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	289	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	290	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	291	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	292
[e5d44f5]	293	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
	294	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
	295	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	296	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	297
[e5d44f5]	298	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	299	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI \|\| DATA_64)
[2035ea1]	300
[e5d44f5]	301	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	302	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	303
	304	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
	305	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	306	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	307
	308	default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
	309
	310	default "arm-unknown-linux-uclibc" if PROC_ARM
	311	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	312	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
	313
	314	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	315	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	316	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	317	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	318	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	319	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	320	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	321	default "alphaev68-unknown-linux-gnu" if PROC_EV68
	322
	323	config TARGET32
	324	string
[f596dde]	325	depends on DATA_MULTI
[e5d44f5]	326	default "i686-pc-linux-gnu" if ARCH_X86
	327	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	328	default "mips-unknown-linux-gnu" if PROC_mips
	329	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	330	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	331
	332	config PLATFORM
	333	string
	334	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	335	default "WRT - Wireless Router" if PLATFORM_WRT
	336
	337	config SPARC64_PROC
	338	string
	339	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	340	default "1" if PROC_ULTRA1
	341	default "2" if PROC_ULTRA2
	342	default "3" if PROC_ULTRA3
	343
	344	config ARCH
	345	string
	346	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	347	default "x86_64" if ARCH_X86 && DATA_MULTI
	348	default "x86_64-64" if ARCH_X86 && DATA_64
	349
	350	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	351
	352	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	353	default "mips64" if ARCH_MIPS && DATA_MULTI
	354	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
	355
	356
	357	default "ppc" if ARCH_PPC && DATA_32
	358	default "ppc64" if ARCH_PPC && DATA_MULTI
	359	default "ppc64-64" if ARCH_PPC && DATA_64
	360
	361	default "sparc" if ARCH_SPARC && DATA_32
	362	default "sparc64" if ARCH_SPARC && DATA_MULTI
	363	default "sparc64-64" if ARCH_SPARC && DATA_64
	364
	365	default "alpha" if ARCH_ALPHA
	366	default "arm" if ARCH_ARM
	367	default "hppa" if ARCH_HPPA
	368
	369	config MIPS_LEVEL
	370	string
[f596dde]	371	depends on BOOK_CLFS3 && ARCH_MIPS
[e5d44f5]	372	default "1" if DATA_32
	373	default "3" if DATA_64
	374
	375	config ABI
	376	string
[f596dde]	377	depends on BOOK_CLFS3
[e5d44f5]	378	default "-m32" if ARCH_X86 \|\| ARCH_ARM
	379	# default "-m64" if NO USED YET IN THE BOOK
	380	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	381	default "-mabi=n32" if ABI_N32
	382	default "-mabi=64" if ABI_64
	383
	384	config ENDIAN
	385	string
[f596dde]	386	depends on BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
[e5d44f5]	387	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	388	default "big" if PROC_mips \|\| PROC_ARM5B
	389
	390	choice
	391	prompt "Build method"
[f596dde]	392	depends on BOOK_CLFS
[e5d44f5]	393	help
	394	What build method should be used: a chroot jail or minimal boot
	395	system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
	396	a full explanation.
	397
	398	config BUILD_CHROOT
	399	bool "chroot"
	400
	401	config BUILD_BOOT
	402	bool "boot"
	403	endchoice
	404
	405	config METHOD
	406	string
	407	default "chroot" if BUILD_CHROOT
	408	default "boot" if BUILD_BOOT
	409
	410	config BOOT_CONFIG
	411	string "BOOT kernel config file (mandatory)"
	412	default "*EDIT ME*"
	413	depends on BUILD_BOOT
	414	help
	415	If METHOD=boot, location of boot-kernel config file
	416	The config file will be copied to ${BUILD_DIR}/sources
	417	and renamed 'bootkernel-config'
	418	NOTE: this setting is required
	419	#--- End CLFS specific params
	420
	421	#--- blfs-tool Support
	422	config BLFS_TOOL
	423	bool "Add blfs-tool support"
	424	default n
	425	depends on !BOOK_CLFS3 && !BOOK_BLFS
	426	help
	427	Activating this option will install additional packages needed
	428	to use blfs tools after booting the new system.
	429	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	430	(see below).
	431	After booting the new xLFS system, but before using the blfs tools,
	432	you should create a user account, move the /blfs_root directory
	433	to that user's home, and change its ownership to that of the user.
	434	Also, be sure to give the user read and write access on the
	435	$TRACKING_DIR directory and the files that it contains.
	436	Don't forget to configure sudo properly on the new system.
	437
	438	config DUMMY # Avoid indenting the items below
	439	bool
	440
	441	if BLFS_TOOL
	442	menu "blfs-tool dependencies"
	443
	444	config DEP_LIBXML
	445	bool "libxml2 (required)"
	446	default y
	447
	448	config DEP_LIBXSLT
	449	bool "libxslt (required)"
	450	default y
	451
	452	config DEP_DBXML
	453	bool "DocBook XML DTD (required)"
	454	default y
	455
	456	config DEP_LYNX
	457	bool "lynx (optional, for reading the generated book)"
	458	default y
	459
	460	config DEP_SUDO
	461	bool "sudo (recommended)"
	462	default y
	463
	464	config DEP_WGET
	465	bool "wget (recommended)"
	466	default y
	467
	468	config DEP_GPM
	469	bool "GPM (optional, see help)"
	470	default n
	471	help
	472	if you install gpm, it will be started
[90f5b6d]	473	automatically on boot. It allows copy-paste
	474	while Xorg is not installed.
[e5d44f5]	475
	476	config DEP_SVN
	477	bool "SVN client (optional, see help)"
	478	default n
	479	help
	480	Subversion is needed for updating the book
[90f5b6d]	481	sources. You do not need it if building a
	482	stable book.
[e5d44f5]	483
	484	endmenu
	485
	486	choice
	487	prompt "BLFS Release"
	488	default BLFS_SVN
	489
	490	config BLFS_SVN
	491	bool "BLFS SVN"
	492	help
	493	Current development version as in trunk
	494
	495	config BLFS_WORKING_COPY
	496	bool "BLFS working copy"
	497	help
	498	A local working copy of the BLFS book.
	499
	500	config BLFS_BRANCH
	501	bool "BLFS Branch or stable book"
	502	help
	503	A supported SVN branch or stable book release
	504	endchoice
	505
	506	config BLFS_WC_LOCATION
	507	string "Location of the local BLFS working copy (mandatory)"
	508	default "EDIT ME"
	509	depends on BLFS_WORKING_COPY
	510	help
[506120ee]	511	Full path to the BLFS book working copy
[e5d44f5]	512
	513	config BLFS_BRANCH_ID
	514	string "BLFS Book Version (mandatory)"
	515	default "EDIT ME"
	516	depends on BLFS_BRANCH
	517	help
	518	A list of valid branches and stable book IDs is available at
	519	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	520	endif
	521	#--- End blfs-tool Support
	522
	523	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	524	# or directly)
	525	config BLFS_ROOT
	526	string "Root of the tools directory (see help)"
	527	default "/blfs_root"
	528	depends on BLFS_TOOL \|\| BOOK_BLFS
	529	help
	530	Path to the directory where all required files and scripts
	531	will be stored.
	532
	533	This path must begin with a slash, and:
	534	- is relative to the user's HOME directory when installing the
	535	blfs tools on an already existing LFS system.
	536	- is relative to the root of the build directory (`/' in chroot)
	537	when adding the tools after a jhalfs run
	538
	539	CAUTION: this directory will be removed if it already exists.
	540
	541	config BLFS_XML
	542	string "BLFS sources directory (internal parameter)"
	543	default "blfs-xml"
[f596dde]	544	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	545	help
	546	The directory name under $BLFS_ROOT where the BLFS
	547	book sources will be copied or checked out. Do not change that
	548	unless you know what you are doing...
[506120ee]	549
[f733772]	550	config LFS_XML
	551	string "LFS sources directory (internal parameter)"
	552	default "lfs-xml"
[f596dde]	553	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	554	help
	555	The directory name under $BLFS_ROOT where the LFS
	556	book sources will be copied or checked out. Do not change that
	557	unless you know what you are doing...
	558
[506120ee]	559	choice
	560	prompt "LFS Release"
[f596dde]	561	default LFS_relSVN
	562	depends on BOOK_BLFS
[506120ee]	563
	564	config LFS_relSVN
	565	bool "LFS SVN"
	566	help
	567	Current development version as in trunk
	568
	569	config LFS_WORKING_COPY
	570	bool "LFS working copy"
	571	help
	572	A local working copy of the LFS book.
	573
	574	config LFS_BRANCH
	575	bool "LFS Branch or stable book"
	576	help
	577	A supported SVN branch or stable book release
	578	endchoice
	579
	580	config BLFS_LFS_BOOK
	581	string "Location of the local LFS working copy (mandatory)"
	582	default "EDIT ME"
	583	depends on LFS_WORKING_COPY
	584	help
	585	Full path to the LFS book working copy"
	586
	587	config BLFS_LFS_BRANCH_ID
	588	string "LFS Book Version (mandatory)"
	589	default "EDIT ME"
	590	depends on LFS_BRANCH
	591	help
	592	A list of valid branches and stable book IDs is available at
	593	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	594	# End of BLFS parameters
	595
	596	#--- Custom Tools support
	597	config CUSTOM_TOOLS
[f596dde]	598	depends on !BOOK_BLFS
[e5d44f5]	599	bool "Add custom tools support"
	600	default n
	601	help
	602	Activating this option additional packages you create
	603	will be installed after finished the xLFS system build.
	604	#--- End Custom Tools support
	605
	606	#--- This direcotry is needed for blfs tools installation and custom tools
	607	# As well.
	608	config TRACKING_DIR
	609	string "Installed packages database directory"
	610	default "/var/lib/jhalfs/BLFS"
	611	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	612	help
	613	Full path to the directory where the database of
	614	installed packages will be created.
	615
	616	If the blfs tools are installed on a running xLFS system,
	617	the user must have enough privileges to create this directory.
	618	It may be necessary to create the /var/lib/jhalfs directory as
	619	root, and make it writable by the user before running this tool.
	620
	621	If you are installing the blfs tools as part of an xLFS build
	622	and/or using the customized scripts feature, you will
	623	need to fix this directory's permissions after booting
	624	the new system.
	625
	626	Note that the user that will build the packages must
	627	have read and write access to this directory.
[53f291f]	628
[a705708]	629	#--- End BOOK Settings
	630	endmenu
	631
[e5d44f5]	632	menu "General Settings"
[f596dde]	633	depends on !BOOK_BLFS
[e5d44f5]	634
[b7583ec]	635	#--- {C,H,}LFS User Account
	636
	637	config LUSER
[e5d44f5]	638	string
	639	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	640	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	641	default "hlfs" if BOOK_HLFS
	642
	643	config LGROUP
	644	string
[b7583ec]	645	default LUSER
[e5d44f5]	646
	647	config LHOME
	648	string
[b7583ec]	649	default "/home"
	650
[e5d44f5]	651	#--- End Set User Account
	652
	653	config BUILDDIR
	654	string "Build Directory"
	655	default "/mnt/build_dir"
	656	help
	657	#-- The directory where the created system will be located.
	658	# NOTE: A working directory named jhalfs will be created
	659	# here, so ensure this does not conflict with the jhalfs
	660	# source directory.
	661
	662	config GETPKG
	663	bool "Retrieve source files"
	664	default n
	665	help
	666	#-- Download all packages and patches required by the selected book
	667	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	668	# first and if necessary retrieves them from the 'net.
	669	# Files will be transferred to $BUILDDIR/sources.
	670
	671	config SRC_ARCHIVE
	672	string "Package Archive Directory"
	673	default "$SRC_ARCHIVE"
[f596dde]	674	depends on GETPKG
[e5d44f5]	675	help
	676	#-- A local archive for packages/files (not $BUILDDIR/sources)
	677	# Any missing file will be downloaded and archived here,
	678	# if the user has the right privileges.
	679
	680	config RETRYSRCDOWNLOAD
	681	bool "Retry on 'connection refused' failure"
	682	default n
[f596dde]	683	depends on GETPKG
[e5d44f5]	684	help
	685	#-- Attempt to download a source package again if it fails
	686	# with a 'connection refused' error. This can happen on
	687	# servers that are overloaded.
	688
	689	config RETRYDOWNLOADCNT
	690	int "Number of retry attempts on download failures"
	691	default 20
[f596dde]	692	depends on GETPKG
[e5d44f5]	693	help
	694	#-- Number of times to retry a failed download.
	695
	696	config DOWNLOADTIMEOUT
	697	int "Download timeout (in seconds)"
	698	default 30
[f596dde]	699	depends on GETPKG
[e5d44f5]	700	help
	701	#-- Number of seconds to wait for a download to start before
	702	# timing out.
	703
	704	config SERVER
	705	string "FTP mirror"
	706	default "http://ftp.osuosl.org"
[f596dde]	707	depends on GETPKG
[e5d44f5]	708	help
	709	#-- FTP mirror to download packages and patches if not found
	710	# in $SRC_ARCHIVE
	711	# As a last resort, the files will downloaded from upstream,
	712	# if possible.
	713
	714	config RUNMAKE
	715	bool "Run the makefile"
	716	default n
	717	help
	718	#-- Automatically run the makefile once it has been created
	719
	720	config CLEAN
	721	bool "Rebuild files"
	722	default n
	723	help
	724	#-- Clean the build directory before performing any other task.
	725	# The directory is cleaned only if it was populated by a
	726	# previous JHALFS run.
[a705708]	727
	728	#--- End General Settings
	729	endmenu
	730
[e5d44f5]	731	menu "Build Settings"
[f596dde]	732	depends on !BOOK_BLFS
[e5d44f5]	733
	734	#--- Test Suites
	735	config CONFIG_TESTS
	736	bool "Run testsuites"
[f596dde]	737	depends on !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	738	default y
	739	help
	740	#-- Run test suites
[1d5f3e3]	741	# If you select 'y' here:
[e5d44f5]	742	# You will have to select between:
[945ccaa]	743	# - Only critical final system testsuites
[e5d44f5]	744	# - All final system testsuites
	745	# - Both temporary tools and final system testsuites
	746	# You will be prompted also about the "flavour" of the
	747	# testsuites run:
	748	# - Don't stop on test suite failures
	749	# - Abort the build at the first test suite failure
	750	#
[1d5f3e3]	751	# Note that in any case, all the test instructions will
	752	# be generated. Those which are not wanted will be commented
	753	# out. If you select 'n' here, the commented test instructions
	754	# do not stop on test suite failures.
	755	#
	756	# HLFS and CLFS have no testsuites available in the
	757	# temporary tools phase
[e5d44f5]	758
[945ccaa]	759	menu "Test settings"
[f596dde]	760	depends on CONFIG_TESTS
[e5d44f5]	761	choice
	762	prompt "Tests level"
	763	default TST_1
	764
	765	config TST_1
[945ccaa]	766	bool "Only final system critical testsuites"
	767	help
	768	#-- Critical tests:
	769	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	770	# testsuites for final system. The others are commented
	771	# out.
[e5d44f5]	772
	773	config TST_2
	774	bool "All final system testsuites"
[1d5f3e3]	775	help
	776	#-- All final system test suites:
	777	# Test instructions for the temporary tools (if available)
	778	# are commented out.
[e5d44f5]	779
	780	config TST_3
[945ccaa]	781	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
	782	help
	783	#-- All tests:
[1d5f3e3]	784	# Runs all the testsuites for both temporary tools (if
	785	# available) and final system
[e5d44f5]	786	endchoice
	787
	788	choice
	789	prompt "Flavour"
	790
	791	config NO_BOMB
[945ccaa]	792	bool "Don't stop on test failures"
[e5d44f5]	793
	794	config BOMB
[945ccaa]	795	bool "Abort the build on the first test failure"
[e5d44f5]	796	endchoice
	797
[30a8961]	798	endmenu # test settings
	799
[945ccaa]	800	config TEST
	801	int
	802	default "0" if !CONFIG_TESTS
	803	default "1" if TST_1
	804	default "2" if TST_2
	805	default "3" if TST_3
	806
[e5d44f5]	807	config BOMB_TEST
	808	bool
	809	default n if NO_BOMB
	810	default y if BOMB
[30a8961]	811	#--- End Test Suites
[e5d44f5]	812
	813	#--- Package Management
	814	config PKGMNGT
	815	bool "Package management"
[f596dde]	816	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	817	default n
	818	help
	819	#-- Use package management
	820	#
[945ccaa]	821	# If set, you'll have to choose between
	822	# two package management styles:
	823	# - Build and install:
	824	# the packages in the final phase are built
	825	# in a separate directory, PKG_DEST.
	826	# You should provide a bash function for
[4b2a5fd]	827	# packaging and installing the package.
[945ccaa]	828	# - Preload a library before install:
	829	# Run the install instructions inside a
	830	# wrapper command, which monitors the
	831	# installed files.
	832	#
[e5d44f5]	833	# Also, you have to provide the instructions
	834	# to build the package manager during the
	835	# temporary tools phase, in the form of a
	836	# sect1 of the book identical to a package
	837	# sect1. See README.PACKAGE_MANAGEMENT
	838	#
	839	# For now, this only works with LFS
[945ccaa]	840	choice
[f596dde]	841	depends on PKGMNGT
[945ccaa]	842	prompt "Package management style"
	843	default PKG_PACK
	844
	845	config PKG_PACK
	846	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	847
[945ccaa]	848	config LIB_LOAD
	849	bool "Preload a library before installing (porg style)"
	850	endchoice
	851
	852	config WRAP_INSTALL
	853	bool
	854	default y if LIB_LOAD
	855	default n if PKG_PACK
[e5d44f5]	856	#--- End package management
	857
	858	#--- Installed files logs
	859	config INSTALL_LOG
	860	bool "Create a log of installed files for each package"
	861	default n
	862	help
	863	#-- Select this if you want to create logs of the files
	864	# installed by each package on the final system.
	865
	866	#--- End Installed files logs
	867
[945ccaa]	868	config STRIP
	869	bool "Strip Installed Binaries/Libraries"
	870	default n
	871	depends on !BOOK_CLFS3
	872
[dc7fd7b]	873	config DEL_LA_FILES
[d2a7ec8]	874	bool "Remove libtool .la files"
[dc7fd7b]	875	default y
	876	help
	877	#-- Remove files libxxx.la installed by libtool. For a rationale
	878	# see https://blog.flameeyes.eu/tags/lafiles/
	879
[945ccaa]	880	config NO_PROGRESS_BAR
[f596dde]	881	bool "DO NOT use/display progress_bar"
[945ccaa]	882	default n
	883	help
	884	#-- Do not use the progress bar routine. On slower machines
	885	# this function consumes precious CPU cycles.
	886
	887	#--- End Build Settings
	888	endmenu
	889
[6990d80]	890	menu "System configuration"
[f596dde]	891	depends on !BOOK_BLFS
[945ccaa]	892
[e5d44f5]	893	#--- FSTAB
	894	config HAVE_FSTAB
	895	bool "Use a custom fstab file"
	896	default n
	897	help
	898	#-- Select this if you have an fstab file with entries
[945ccaa]	899	# for the target system
[a705708]	900
[e5d44f5]	901	config FSTAB
	902	string "Fstab file (optional)"
	903	default "*EDIT ME*"
	904	depends on HAVE_FSTAB
	905	help
	906	#-- The location of fstab file (if empty, a template is created)
	907	#--- End FSTAB
	908
	909	#--- Kernel
	910	config CONFIG_BUILD_KERNEL
	911	bool "Build the kernel"
	912	default n
	913	help
	914	#-- Select this option if you wish to build the kernel.
	915	#
	916	# You will be prompted for the full path to the .config
	917	# file. It will be copied to the 'sources' directory and
	918	# renamed kernel-config
	919
	920	config CONFIG
	921	string "Kernel config file"
	922	default "*EDIT ME*"
	923	depends on CONFIG_BUILD_KERNEL
	924	help
	925	#-- Fully qualified path to a kernel config file
	926	# The config file will be copied to ${BUILD_DIR}/sources
	927	# and renamed 'kernel-config'
	928	#--- End Kernel
	929
	930	config VIMLANG
	931	bool "Install vim-lang package"
	932	default n
	933	depends on !BOOK_HLFS && !BOOK_CLFS3
	934	help
	935	#-- Install the optional vim-lang package
	936	# NOTE: This option is obsolete with the 7.3 release of Vim
	937	# which is included in all recent releases of LFS.
	938
	939	config TIMEZONE
	940	string "TimeZone"
	941	default "GMT"
	942	help
	943	#-- The timezone as output by tzselect
	944	# This will be copied to /etc/localtime
	945
	946	config LANG
	947	string "Language"
	948	default "$LANG"
	949	help
	950	#-- LANG variable set in /etc/profile
	951	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	952	# for values (or the file localedata/SUPPORTED in glibc tarball)
	953
	954	config FULL_LOCALE
	955	bool "Install the full set of locales"
	956	default n
	957	help
	958	#-- If set to y, the full set of supported locales
	959	# will be installed. Otherwise, only the minimal set
	960	# necessary for the tests will be installed,
	961	# together with the locale associated with the
	962	# LANG you have chosen, if not in the minimal set.
	963
	964	#--- Groff page
	965	choice
	966	prompt "Groff page size"
	967	default PAGE_LETTER
	968	help
	969	#-- Page definition for groff: letter or A4
	970
	971	config PAGE_LETTER
	972	bool "letter"
	973
	974	config PAGE_A4
	975	bool "A4"
	976	endchoice
	977
	978	config PAGE
	979	string
	980	default "letter" if PAGE_LETTER
	981	default "A4" if PAGE_A4
	982	#--- End Groff page
[a705708]	983
[945ccaa]	984	config HOSTNAME
[6990d80]	985	string "Hostname (see help)"
[945ccaa]	986	default "EDITME"
[6990d80]	987	help
	988	If you are on a public network, use the hostname given to you by
	989	your institution, or corporation, etc. If your network is private,
	990	that is, behind a firewall such as a box to connect to your ISP,
	991	you can choose anything you'd like. Combined with the domain name
	992	"local", you have the possibility to access your computer by name
	993	instead of address on the private network (see RFC 6762 and
	994	https://www.howtogeek.com/167190/).
[945ccaa]	995
	996	menu "Network configuration"
	997	config INTERFACE
	998	string "netword card name"
	999	default "eth0"
[6990d80]	1000	help
	1001	eth0 is used in most cases. Virtual insterfaces may get other
	1002	names (for example enp0s3 for the default network stack in qemu).
	1003	Systemd may also rename network interfaces according to their
	1004	bus addresses.
[945ccaa]	1005	config IP_ADDR
	1006	string "Static IP address"
	1007	default "10.0.2.9"
[6990d80]	1008	help
	1009	The default here is for a virtual interface in qemu. Private
	1010	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	1011	You have to know your network prefix. Then the last figure
	1012	may be anything you like.
	1013
[945ccaa]	1014	config GATEWAY
	1015	string "Gateway"
	1016	default "10.0.2.2"
[6990d80]	1017	help
	1018	Again, this default is for a qemu network stack. Usually, the
	1019	gateway is the address of your firewall.
[945ccaa]	1020	config PREFIX
	1021	string "Subnet prefix"
	1022	default "24"
[6990d80]	1023	help
	1024	Again, this default is for a qemu network stack, but is also
	1025	the most used in private networks.
[945ccaa]	1026	config BROADCAST
	1027	string "Broadcast address"
	1028	default "10.0.2.255"
	1029	config DOMAIN
[6990d80]	1030	string "Domain name (see help)"
	1031	default "local"
	1032	help
	1033	Domain Name:
	1034	Doamin names are registered, so if your computer is on a public
	1035	network, you cannot use any name you'd like. On a public
	1036	network, you should have been given a domain name by
	1037	your corporation, institution, etc.
	1038	If your network is really private, that is behind a firewall
	1039	such as a box for connecting to an ISP, you can choose any
	1040	domain you'd like. You can also opt for "local", see RFC 6762,
	1041	or "something.test", see RFC 6761.
[945ccaa]	1042	config DNS1
	1043	string "Primary Name server"
	1044	default "10.0.2.3"
	1045	config DNS2
	1046	string "Secondary Name server"
	1047	default "8.8.8.8"
	1048	endmenu # Network configuration
	1049
	1050	menu "Console configuration"
	1051	config FONT
	1052	string "Console font"
	1053	default "lat0-16"
[3b43e17b]	1054	help
	1055	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	1056	etc, must be done manually.
[945ccaa]	1057	config KEYMAP
	1058	string "Keymap name"
	1059	default "us"
[3b43e17b]	1060	config LOCAL
	1061	boolean "Hardware clock is set to local time"
	1062	default n
	1063	help
	1064	If the harware clock is set to local time, answer yes,
	1065	If it is set to UTC, answer no
	1066	config LOG_LEVEL
	1067	string "Default log level (1-8)"
	1068	default "4"
[f596dde]	1069	depends on BOOK_LFS
[3b43e17b]	1070	help
	1071	This can be changed using dmesg. 1 means "no message",
	1072	8 shows every message sent by the kernel, which is very
	1073	noisy. The default at boot time is 7, which is quite
	1074	noisy too.
[945ccaa]	1075	endmenu # Console configuration
	1076
	1077	endmenu #--- System configuration
[a705708]	1078
[e5d44f5]	1079	menu "Advanced Features"
[f596dde]	1080	depends on !BOOK_BLFS
[e5d44f5]	1081
	1082	config REPORT
	1083	bool "Create SBU and disk usage report"
	1084	default y
	1085
[f596dde]	1086	#--- ICA
[e5d44f5]	1087	config COMPARE
	1088	bool "Run comparison analysis on final stage"
[f596dde]	1089	depends on !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1090	default n
	1091	help
	1092	#-- Should an iterative comparison analysis be performed?
	1093	#
[f596dde]	1094	# Unless you are familiar with ICA, do not
[e5d44f5]	1095	# select this option
	1096	#
[f596dde]	1097	# ICA is an analysis tool for comparing one
[e5d44f5]	1098	# build to the next. Builds mays differ from one iteration
[f596dde]	1099	# to another due to the build order and this tool try
[e5d44f5]	1100	# to ferret out those differences by examining the stored
	1101	# build logs and binary files.
	1102	#
	1103	# The scripts are well commented and can be found in ./extras/*
	1104	#
	1105
	1106	config ITERATIONS
	1107	int "Number of test runs (2,3,4,5)" if COMPARE
	1108	depends on COMPARE
	1109	range 2 5
	1110	default 3
	1111
	1112	config RUN_ICA
[f596dde]	1113	bool
	1114	default y if COMPARE
[e5d44f5]	1115
[f596dde]	1116	#--- End ICA
[e5d44f5]	1117
	1118	#--- Optimizations
[0536270]	1119	if !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1120	config CONFIG_OPTIMIZE
	1121	bool "Optimization and parallelization"
	1122	default n
	1123	help
	1124	# Opens a menu for various optimization settings:
	1125	# Actual optimization flags MUST be defined in ./optimize/*
	1126	# before activating this option.
	1127	#
	1128	# WARNING: The use of build optimizations may lead to build issues.
	1129	# If the system doesn't work as expected, please rebuild
	1130	# without optimizations before asking for support.
	1131	menu "Optimization settings"
	1132	depends on CONFIG_OPTIMIZE
	1133
	1134	config N_PARALLEL
	1135	int "Number of parallel `make' jobs"
	1136	default 1
	1137	help
	1138	#-- The usual recommandation is (number of CPU cores)+1
	1139	# Do not set for meaningful SBU calculations.
	1140
	1141	choice
[f596dde]	1142	prompt "Optimization level"
[e5d44f5]	1143	default OPT_1
	1144	help
	1145	#-- Optimization values are set in optimize/* files
	1146
	1147	config OPT_1
	1148	bool "Final system only"
	1149
	1150	config OPT_2
	1151	bool "Both temp tools and final system"
	1152
	1153	config OPT_3
	1154	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
	1155	endchoice
[84a3fda]	1156
	1157	config REALSBU
	1158	bool "Build Binutls pass1 without optimization (Real SBU)"
	1159	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	1160	default n
	1161	help
	1162	#-- Use -j1 in make invokation for Binutils pass1 to
	1163	# get a valid SBU value.
	1164
[854854e]	1165	endmenu
[e5d44f5]	1166	config OPTIMIZE
	1167	int
	1168	default "0" if !CONFIG_OPTIMIZE
	1169	default "1" if OPT_1
	1170	default "2" if OPT_2
	1171	default "3" if OPT_3
[045b2dc]	1172	endif
[84a3fda]	1173
[e5d44f5]	1174	#--- End Optimizations
[a705708]	1175
[e5d44f5]	1176	#-- Internal Settings
	1177	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	1178
[e5d44f5]	1179	config SCRIPT_ROOT
	1180	string "Scripts root"
	1181	default "jhalfs"
[4da2512]	1182
[e5d44f5]	1183	config JHALFSDIR
	1184	string "jhalfs directory"
	1185	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	1186
[e5d44f5]	1187	config LOGDIRBASE
	1188	string "Build logs directory basename"
	1189	default "logs"
[93346ee]	1190
[e5d44f5]	1191	config LOGDIR
	1192	string "Build logs directory"
	1193	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	1194
[e5d44f5]	1195	config TESTLOGDIRBASE
	1196	string "Test suites logs directory basename"
	1197	default "test-logs"
[4da2512]	1198
[e5d44f5]	1199	config TESTLOGDIR
	1200	string "Test suites logs directory"
	1201	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	1202
[e5d44f5]	1203	config FILELOGDIRBASE
	1204	string "Installed files logs directory basename"
	1205	default "installed-files"
[93346ee]	1206
[e5d44f5]	1207	config FILELOGDIR
	1208	string "Installed files logs directory"
	1209	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1210
[e5d44f5]	1211	config ICALOGDIR
	1212	string "ICA logs directory"
	1213	default "$LOGDIR/ICA"
[4da2512]	1214
[e5d44f5]	1215	config MKFILE
	1216	string "Makefile"
	1217	default "$JHALFSDIR/Makefile"
[4da2512]	1218
[e5d44f5]	1219	config XSL
	1220	string "XSL stylesheet"
	1221	default "$PROGNAME.xsl"
[4da2512]	1222
[e5d44f5]	1223	config PKG_LST
	1224	string "Package contents list"
	1225	default "unpacked"
[4da2512]	1226
[e5d44f5]	1227	#--- End Internal Settings
	1228	endmenu
[4da2512]	1229
[a705708]	1230	#--- End Advanced Features
	1231	endmenu
[7b6ecc5]	1232
[a16f769]	1233	config REBUILD_MAKEFILE
[f596dde]	1234	depends on !BOOK_BLFS
[e5d44f5]	1235	bool "Rebuild the Makefile (see help)"
	1236	default n
	1237	help
	1238	#-- Rebuild the Makefile
	1239	#
	1240	# This option allows to rebuild the Makefile after
	1241	# customizing the base system build scripts.
	1242	#
	1243	# See README.CUSTOM for more info about this feature.
[7b6ecc5]	1244

Note: See TracBrowser for help on using the repository browser.

Download in other formats: