Context Navigation

source: Config.in@ 5afaf7c

ablfs-more legacy trunk

Last change on this file since 5afaf7c was 84a3fda, checked in by Pierre Labastie <pierre@…>, 7 years ago

Do not optimize binutils-pass1 in order to measure the SBU:

introduce REALSBU variable if Config.in and jhalfs, and display it
Adpat LFS/master.sh

Property mode set to 100644

File size: 42.3 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
	13	Set up the tools to build LFS with Sys V init.
	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_CLFS
	21	bool "Cross-Compiled Linux From Scratch"
	22	help
	23	Set up the tools to build CLFS.
	24
	25	config BOOK_CLFS2
	26	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
	27	help
	28	Set up the tools to build CLFS by the sysroot method.
	29
	30	config BOOK_CLFS3
	31	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
	32	help
	33	Set up the tools to build CLFS with tools for embedded systems.
	34
	35	config BOOK_BLFS
	36	bool "Beyond Linux From Scratch (see help)"
	37	help
	38	if the (C)LFS system has already been built, install the tools
	39	to build BLFS packages.
	40	endchoice
	41
[39dc04a]	42	choice
	43	depends BOOK_BLFS
	44	prompt "Init system"
	45
	46	config BLFS_SYSV
	47	bool "BLFS Sys V"
	48	help
	49	Extract the Sys V flavour of the BLFS book
	50
	51	config BLFS_SYSD
	52	bool "BLFS systemd"
	53	help
	54	Extract the systemd flavour of the BLFS book
	55
	56	endchoice
	57
[e5d44f5]	58	config INITSYS
	59	string
[39dc04a]	60	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	61	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	62
	63	config PROGNAME
	64	string
	65	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	66	default "clfs" if BOOK_CLFS
	67	default "clfs2" if BOOK_CLFS2
	68	default "clfs3" if BOOK_CLFS3
	69
	70	config RUN_ME
	71	string
	72	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_CLFS \|\| \
	73	BOOK_CLFS2 \|\| BOOK_CLFS_3
	74	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	75	#--- End BOOK/script
	76
	77	#--- Book version
	78	choice
	79	prompt "Release"
	80	default relSVN if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_BLFS
	81	default relGIT if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	82
	83	config relSVN
	84	bool "SVN"
	85	depends on BOOK_LFS \|\| BOOK_BLFS \|\| BOOK_LFS_SYSD
	86	help
	87	Current development version as in trunk
	88
	89	config relGIT
	90	bool "GIT"
	91	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	92	help
	93	Current development git master branch
	94
	95	config WORKING_COPY
	96	bool "Working Copy"
	97	help
	98	A local working copy
	99
	100	config BRANCH
	101	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
	102	help
	103	A supported SVN/GIT branch or stable released book
	104	endchoice
	105
	106	config BRANCH_ID
	107	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	108	default "EDIT ME"
	109	depends BRANCH
	110	help
	111	A list of valid branches and stable book IDs is available at
	112	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	113
	114	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	115	YYY version.
	116
	117	config BOOK
	118	string "Loc of working copy (mandatory)"
	119	default "EDIT ME"
	120	depends WORKING_COPY
	121	help
	122	The full path to a local copy of the book XML sources
	123
	124	#--- End BOOK version
	125
	126	#--- CLFS specific params
	127	choice
	128	prompt "Target architecture"
	129	default ARCH_X86
	130	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	131	help
	132	Choose the target system base architecture
	133
	134	config ARCH_X86
	135	bool "x86"
	136
	137	config ARCH_MIPS
	138	bool "mips" if !BOOK_CLFS2
	139
	140	config ARCH_PPC
	141	bool "ppc" if BOOK_CLFS
	142
	143	config ARCH_SPARC
	144	bool "sparc" if BOOK_CLFS
	145
	146	config ARCH_ALPHA
	147	bool "alpha" if !BOOK_CLFS3
	148
	149	config ARCH_ARM
	150	bool "arm" if !BOOK_CLFS
	151
	152	config ARCH_HPPA
	153	bool "hppa" if BOOK_CLFS2
	154	endchoice
	155
	156	choice
	157	prompt "Hardware Platform"
	158	depends BOOK_CLFS3 && ARCH_MIPS
	159	default PLATFORM_GENERIC
	160	help
	161	Choose a destination platform
	162	Platform specific files will be included
	163
	164	config PLATFORM_GENERIC
	165	bool "Generic platform"
	166
	167	config PLATFORM_WRT
	168	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	169	endchoice
	170
	171	choice
	172	prompt "Library"
	173	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
	174	default DATA_32
	175	help
	176	Choose the target system libraries type
	177
	178	config DATA_32
	179	bool "32-bit"
[a705708]	180
[e5d44f5]	181	config DATA_64
	182	bool "64-bit"
	183
	184	config DATA_MULTI
	185	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
	186	endchoice
[a705708]	187
[e5d44f5]	188	choice
	189	prompt "Processor type"
	190	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
	191	help
	192	Choose the target system processor
[a705708]	193
[e5d44f5]	194	config PROC_i486
	195	bool "486 Compatibles" if ARCH_X86
[a705708]	196
[e5d44f5]	197	config PROC_i586
	198	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	199
[e5d44f5]	200	config PROC_i686
	201	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	202
[e5d44f5]	203	config PROC_mipsel
	204	bool "MIPS Little Endian" if ARCH_MIPS
[2035ea1]	205
[e5d44f5]	206	config PROC_mips
	207	bool "MIPS Big Endian" if ARCH_MIPS
[2035ea1]	208
[e5d44f5]	209	config PROC_unknown
	210	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	211
[e5d44f5]	212	config PROC_hppa1
	213	bool "PA 7000 Series" if ARCH_HPPA
[c560e9a]	214
[e5d44f5]	215	config PROC_hppa2
	216	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	217
[e5d44f5]	218	config PROC_EV5
	219	bool "EV5 Series" if ARCH_ALPHA
[c560e9a]	220
[e5d44f5]	221	config PROC_EV56
	222	bool "EV56 Series" if ARCH_ALPHA
[c560e9a]	223
[e5d44f5]	224	config PROC_PCA56
	225	bool "PCA56 Series" if ARCH_ALPHA
[c560e9a]	226
[e5d44f5]	227	config PROC_PCA57
	228	bool "PCA57 Series" if ARCH_ALPHA
[c560e9a]	229
[e5d44f5]	230	config PROC_EV6
	231	bool "EV6 Series" if ARCH_ALPHA
[c560e9a]	232
[e5d44f5]	233	config PROC_EV67
	234	bool "EV67 Series" if ARCH_ALPHA
[a87e07a]	235
[e5d44f5]	236	config PROC_EV68
	237	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	238
[e5d44f5]	239	config PROC_ARM
	240	bool "Generic arm, little endian" if ARCH_ARM
[a87e07a]	241
[e5d44f5]	242	config PROC_ARM5L
	243	bool "Generic arm, version 5, little endian" if ARCH_ARM
[650acce]	244
[e5d44f5]	245	config PROC_ARM5B
	246	bool "Generic arm, version 5, big endian" if ARCH_ARM
[650acce]	247
[e5d44f5]	248	config PROC_ULTRA1
	249	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[650acce]	250
[e5d44f5]	251	config PROC_ULTRA2
	252	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[a705708]	253
[e5d44f5]	254	config PROC_ULTRA3
	255	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	256	endchoice
[c63c0fa]	257
[e5d44f5]	258	choice
	259	prompt "MIPS 64 ABI"
	260	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
	261	default ABI_64
	262	help
	263	Choose the target system ABI to use
[c63c0fa]	264
[e5d44f5]	265	config ABI_32
	266	bool "o32"
[c63c0fa]	267
[e5d44f5]	268	config ABI_N32
	269	bool "n32"
[c63c0fa]	270
[e5d44f5]	271	config ABI_64
	272	bool "n64"
	273	endchoice
[c5ff430]	274
[e5d44f5]	275	config TARGET
	276	string
	277	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	278	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	279	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[2639f65]	280
[e5d44f5]	281	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	282	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	283	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	284
[e5d44f5]	285	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[a705708]	286
[e5d44f5]	287	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	288	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	289	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	290	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	291
[e5d44f5]	292	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
	293	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
	294	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	295	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	296
[e5d44f5]	297	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	298	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI \|\| DATA_64)
[2035ea1]	299
[e5d44f5]	300	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	301	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	302
	303	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
	304	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	305	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	306
	307	default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
	308
	309	default "arm-unknown-linux-uclibc" if PROC_ARM
	310	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	311	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
	312
	313	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	314	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	315	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	316	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	317	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	318	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	319	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	320	default "alphaev68-unknown-linux-gnu" if PROC_EV68
	321
	322	config TARGET32
	323	string
	324	depends DATA_MULTI
	325	default "i686-pc-linux-gnu" if ARCH_X86
	326	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	327	default "mips-unknown-linux-gnu" if PROC_mips
	328	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	329	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	330
	331	config PLATFORM
	332	string
	333	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	334	default "WRT - Wireless Router" if PLATFORM_WRT
	335
	336	config SPARC64_PROC
	337	string
	338	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	339	default "1" if PROC_ULTRA1
	340	default "2" if PROC_ULTRA2
	341	default "3" if PROC_ULTRA3
	342
	343	config ARCH
	344	string
	345	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	346	default "x86_64" if ARCH_X86 && DATA_MULTI
	347	default "x86_64-64" if ARCH_X86 && DATA_64
	348
	349	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	350
	351	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	352	default "mips64" if ARCH_MIPS && DATA_MULTI
	353	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
	354
	355
	356	default "ppc" if ARCH_PPC && DATA_32
	357	default "ppc64" if ARCH_PPC && DATA_MULTI
	358	default "ppc64-64" if ARCH_PPC && DATA_64
	359
	360	default "sparc" if ARCH_SPARC && DATA_32
	361	default "sparc64" if ARCH_SPARC && DATA_MULTI
	362	default "sparc64-64" if ARCH_SPARC && DATA_64
	363
	364	default "alpha" if ARCH_ALPHA
	365	default "arm" if ARCH_ARM
	366	default "hppa" if ARCH_HPPA
	367
	368	config MIPS_LEVEL
	369	string
	370	depends BOOK_CLFS3 && ARCH_MIPS
	371	default "1" if DATA_32
	372	default "3" if DATA_64
	373
	374	config ABI
	375	string
	376	depends BOOK_CLFS3
	377	default "-m32" if ARCH_X86 \|\| ARCH_ARM
	378	# default "-m64" if NO USED YET IN THE BOOK
	379	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	380	default "-mabi=n32" if ABI_N32
	381	default "-mabi=64" if ABI_64
	382
	383	config ENDIAN
	384	string
	385	depends BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
	386	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	387	default "big" if PROC_mips \|\| PROC_ARM5B
	388
	389	choice
	390	prompt "Build method"
	391	depends BOOK_CLFS
	392	help
	393	What build method should be used: a chroot jail or minimal boot
	394	system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
	395	a full explanation.
	396
	397	config BUILD_CHROOT
	398	bool "chroot"
	399
	400	config BUILD_BOOT
	401	bool "boot"
	402	endchoice
	403
	404	config METHOD
	405	string
	406	default "chroot" if BUILD_CHROOT
	407	default "boot" if BUILD_BOOT
	408
	409	config BOOT_CONFIG
	410	string "BOOT kernel config file (mandatory)"
	411	default "*EDIT ME*"
	412	depends on BUILD_BOOT
	413	help
	414	If METHOD=boot, location of boot-kernel config file
	415	The config file will be copied to ${BUILD_DIR}/sources
	416	and renamed 'bootkernel-config'
	417	NOTE: this setting is required
	418	#--- End CLFS specific params
	419
	420	#--- blfs-tool Support
	421	config BLFS_TOOL
	422	bool "Add blfs-tool support"
	423	default n
	424	depends on !BOOK_CLFS3 && !BOOK_BLFS
	425	help
	426	Activating this option will install additional packages needed
	427	to use blfs tools after booting the new system.
	428	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	429	(see below).
	430	After booting the new xLFS system, but before using the blfs tools,
	431	you should create a user account, move the /blfs_root directory
	432	to that user's home, and change its ownership to that of the user.
	433	Also, be sure to give the user read and write access on the
	434	$TRACKING_DIR directory and the files that it contains.
	435	Don't forget to configure sudo properly on the new system.
	436
	437	config DUMMY # Avoid indenting the items below
	438	bool
	439
	440	if BLFS_TOOL
	441	menu "blfs-tool dependencies"
	442
	443	config DEP_LIBXML
	444	bool "libxml2 (required)"
	445	default y
	446
	447	config DEP_LIBXSLT
	448	bool "libxslt (required)"
	449	default y
	450
	451	config DEP_DBXML
	452	bool "DocBook XML DTD (required)"
	453	default y
	454
	455	config DEP_LYNX
	456	bool "lynx (optional, for reading the generated book)"
	457	default y
	458
	459	config DEP_SUDO
	460	bool "sudo (recommended)"
	461	default y
	462
	463	config DEP_WGET
	464	bool "wget (recommended)"
	465	default y
	466
	467	config DEP_GPM
	468	bool "GPM (optional, see help)"
	469	default n
	470	help
	471	if you install gpm, it will be started
	472	automatically on boot. You'll have to edit
	473	/etc/sysconfig/mouse for your system
	474
	475	config DEP_SVN
	476	bool "SVN client (optional, see help)"
	477	default n
	478	help
	479	Subversion is needed for updating the book
	480	sources. If you want ssl support, select
	481	OPENSSL below.
	482
	483	config DEP_OPENSSL
	484	bool "OPENSSL (optional, see help)"
	485	default n
	486	help
	487	selecting OPENSSL here allows to build
	488	subversion with ssl support, avoiding a later
	489	recompilation
	490
	491	config DEP_PYTHON
	492	bool "PYTHON 2 (optional, see help)"
	493	default n
	494	help
	495	selecting PYTHON 2 here allows to build
	496	the libxml2 and libxslt python modules,
	497	avoiding a later recompilation
	498
	499	endmenu
	500
	501	choice
	502	prompt "BLFS Release"
	503	default BLFS_SVN
	504
	505	config BLFS_SVN
	506	bool "BLFS SVN"
	507	help
	508	Current development version as in trunk
	509
	510	config BLFS_WORKING_COPY
	511	bool "BLFS working copy"
	512	help
	513	A local working copy of the BLFS book.
	514
	515	config BLFS_BRANCH
	516	bool "BLFS Branch or stable book"
	517	help
	518	A supported SVN branch or stable book release
	519	endchoice
	520
	521	config BLFS_WC_LOCATION
	522	string "Location of the local BLFS working copy (mandatory)"
	523	default "EDIT ME"
	524	depends on BLFS_WORKING_COPY
	525	help
[506120ee]	526	Full path to the BLFS book working copy
[e5d44f5]	527
	528	config BLFS_BRANCH_ID
	529	string "BLFS Book Version (mandatory)"
	530	default "EDIT ME"
	531	depends on BLFS_BRANCH
	532	help
	533	A list of valid branches and stable book IDs is available at
	534	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	535	endif
	536	#--- End blfs-tool Support
	537
	538	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	539	# or directly)
	540	config BLFS_ROOT
	541	string "Root of the tools directory (see help)"
	542	default "/blfs_root"
	543	depends on BLFS_TOOL \|\| BOOK_BLFS
	544	help
	545	Path to the directory where all required files and scripts
	546	will be stored.
	547
	548	This path must begin with a slash, and:
	549	- is relative to the user's HOME directory when installing the
	550	blfs tools on an already existing LFS system.
	551	- is relative to the root of the build directory (`/' in chroot)
	552	when adding the tools after a jhalfs run
	553
	554	CAUTION: this directory will be removed if it already exists.
	555
	556	config BLFS_XML
	557	string "BLFS sources directory (internal parameter)"
	558	default "blfs-xml"
	559	depends BLFS_TOOL \|\| BOOK_BLFS
	560	help
	561	The directory name under $BLFS_ROOT where the BLFS
	562	book sources will be copied or checked out. Do not change that
	563	unless you know what you are doing...
[506120ee]	564
[f733772]	565	config LFS_XML
	566	string "LFS sources directory (internal parameter)"
	567	default "lfs-xml"
	568	depends BLFS_TOOL \|\| BOOK_BLFS
	569	help
	570	The directory name under $BLFS_ROOT where the LFS
	571	book sources will be copied or checked out. Do not change that
	572	unless you know what you are doing...
	573
[506120ee]	574	choice
	575	prompt "LFS Release"
	576	default LFS_SVN
	577	depends BOOK_BLFS
	578
	579	config LFS_relSVN
	580	bool "LFS SVN"
	581	help
	582	Current development version as in trunk
	583
	584	config LFS_WORKING_COPY
	585	bool "LFS working copy"
	586	help
	587	A local working copy of the LFS book.
	588
	589	config LFS_BRANCH
	590	bool "LFS Branch or stable book"
	591	help
	592	A supported SVN branch or stable book release
	593	endchoice
	594
	595	config BLFS_LFS_BOOK
	596	string "Location of the local LFS working copy (mandatory)"
	597	default "EDIT ME"
	598	depends on LFS_WORKING_COPY
	599	help
	600	Full path to the LFS book working copy"
	601
	602	config BLFS_LFS_BRANCH_ID
	603	string "LFS Book Version (mandatory)"
	604	default "EDIT ME"
	605	depends on LFS_BRANCH
	606	help
	607	A list of valid branches and stable book IDs is available at
	608	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	609	# End of BLFS parameters
	610
	611	#--- Custom Tools support
	612	config CUSTOM_TOOLS
	613	depends !BOOK_BLFS
	614	bool "Add custom tools support"
	615	default n
	616	help
	617	Activating this option additional packages you create
	618	will be installed after finished the xLFS system build.
	619	#--- End Custom Tools support
	620
	621	#--- This direcotry is needed for blfs tools installation and custom tools
	622	# As well.
	623	config TRACKING_DIR
	624	string "Installed packages database directory"
	625	default "/var/lib/jhalfs/BLFS"
	626	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	627	help
	628	Full path to the directory where the database of
	629	installed packages will be created.
	630
	631	If the blfs tools are installed on a running xLFS system,
	632	the user must have enough privileges to create this directory.
	633	It may be necessary to create the /var/lib/jhalfs directory as
	634	root, and make it writable by the user before running this tool.
	635
	636	If you are installing the blfs tools as part of an xLFS build
	637	and/or using the customized scripts feature, you will
	638	need to fix this directory's permissions after booting
	639	the new system.
	640
	641	Note that the user that will build the packages must
	642	have read and write access to this directory.
[53f291f]	643
[a705708]	644	#--- End BOOK Settings
	645	endmenu
	646
[e5d44f5]	647	menu "General Settings"
	648	depends !BOOK_BLFS
	649
	650	#--- Set User Account
	651	config CONFIG_USER
	652	bool "Change the default user/group and homedir for this build"
	653	default n
	654	help #-- Unprivileged user and group name
	655	# If you do not have the privilege to create/delete
	656	# users and groups you can specify your own
	657	# user ID for the build
	658	#
	659	# default values for each book
	660	# LFS lfs
	661	# CLFS* clfs
	662	# HLFS hlfs
	663	#
	664	# Also, if your host places users' home dirs into a
	665	# directory other than /home you can specify it here.
	666
	667	config DEF_USER
	668	string
	669	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	670	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	671	default "hlfs" if BOOK_HLFS
	672
	673	config SET_USER
	674	string "User account"
	675	depends CONFIG_USER
	676	default DEF_USER
	677
	678	config CONFIG_GROUP
	679	bool "Set Group?"
	680	default n
	681	depends CONFIG_USER
	682
	683	config SET_GROUP
	684	string "GROUP account"
	685	depends CONFIG_GROUP
	686	default DEF_USER
	687
	688	config CONFIG_HOME
	689	bool "Set home dir?"
	690	default n
	691	depends CONFIG_USER
	692
	693	config SET_HOME
	694	string "Path to the directory under which the user's home directory will be created"
	695	depends CONFIG_HOME
	696	default "/home"
	697
	698	config LUSER
	699	string
	700	default DEF_USER if !CONFIG_USER
	701	default SET_USER if CONFIG_USER
	702
	703	config LGROUP
	704	string
	705	default LUSER if !CONFIG_GROUP
	706	default SET_GROUP if CONFIG_GROUP
	707
	708	config LHOME
	709	string
	710	default "/home" if !CONFIG_HOME
	711	default SET_HOME if CONFIG_HOME
	712	#--- End Set User Account
	713
	714	config BUILDDIR
	715	string "Build Directory"
	716	default "/mnt/build_dir"
	717	help
	718	#-- The directory where the created system will be located.
	719	# NOTE: A working directory named jhalfs will be created
	720	# here, so ensure this does not conflict with the jhalfs
	721	# source directory.
	722
	723	config GETPKG
	724	bool "Retrieve source files"
	725	default n
	726	help
	727	#-- Download all packages and patches required by the selected book
	728	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	729	# first and if necessary retrieves them from the 'net.
	730	# Files will be transferred to $BUILDDIR/sources.
	731
	732	config SRC_ARCHIVE
	733	string "Package Archive Directory"
	734	default "$SRC_ARCHIVE"
	735	depends GETPKG
	736	help
	737	#-- A local archive for packages/files (not $BUILDDIR/sources)
	738	# Any missing file will be downloaded and archived here,
	739	# if the user has the right privileges.
	740
	741	config RETRYSRCDOWNLOAD
	742	bool "Retry on 'connection refused' failure"
	743	default n
	744	depends GETPKG
	745	help
	746	#-- Attempt to download a source package again if it fails
	747	# with a 'connection refused' error. This can happen on
	748	# servers that are overloaded.
	749
	750	config RETRYDOWNLOADCNT
	751	int "Number of retry attempts on download failures"
	752	default 20
	753	depends GETPKG
	754	help
	755	#-- Number of times to retry a failed download.
	756
	757	config DOWNLOADTIMEOUT
	758	int "Download timeout (in seconds)"
	759	default 30
	760	depends GETPKG
	761	help
	762	#-- Number of seconds to wait for a download to start before
	763	# timing out.
	764
	765	config SERVER
	766	string "FTP mirror"
	767	default "http://ftp.osuosl.org"
	768	depends GETPKG
	769	help
	770	#-- FTP mirror to download packages and patches if not found
	771	# in $SRC_ARCHIVE
	772	# As a last resort, the files will downloaded from upstream,
	773	# if possible.
	774
	775	config RUNMAKE
	776	bool "Run the makefile"
	777	default n
	778	help
	779	#-- Automatically run the makefile once it has been created
	780
	781	config CLEAN
	782	bool "Rebuild files"
	783	default n
	784	help
	785	#-- Clean the build directory before performing any other task.
	786	# The directory is cleaned only if it was populated by a
	787	# previous JHALFS run.
[a705708]	788
	789	#--- End General Settings
	790	endmenu
	791
[e5d44f5]	792	menu "Build Settings"
	793	depends !BOOK_BLFS
	794
	795	#--- Test Suites
	796	config CONFIG_TESTS
	797	bool "Run testsuites"
	798	depends !BOOK_CLFS2 && !BOOK_CLFS3
	799	default y
	800	help
	801	#-- Run test suites
[1d5f3e3]	802	# If you select 'y' here:
[e5d44f5]	803	# You will have to select between:
[945ccaa]	804	# - Only critical final system testsuites
[e5d44f5]	805	# - All final system testsuites
	806	# - Both temporary tools and final system testsuites
	807	# You will be prompted also about the "flavour" of the
	808	# testsuites run:
	809	# - Don't stop on test suite failures
	810	# - Abort the build at the first test suite failure
	811	#
[1d5f3e3]	812	# Note that in any case, all the test instructions will
	813	# be generated. Those which are not wanted will be commented
	814	# out. If you select 'n' here, the commented test instructions
	815	# do not stop on test suite failures.
	816	#
	817	# HLFS and CLFS have no testsuites available in the
	818	# temporary tools phase
[e5d44f5]	819
[945ccaa]	820	menu "Test settings"
	821	depends CONFIG_TESTS
[e5d44f5]	822	choice
	823	prompt "Tests level"
	824	default TST_1
	825
	826	config TST_1
[945ccaa]	827	bool "Only final system critical testsuites"
	828	help
	829	#-- Critical tests:
	830	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	831	# testsuites for final system. The others are commented
	832	# out.
[e5d44f5]	833
	834	config TST_2
	835	bool "All final system testsuites"
[1d5f3e3]	836	help
	837	#-- All final system test suites:
	838	# Test instructions for the temporary tools (if available)
	839	# are commented out.
[e5d44f5]	840
	841	config TST_3
[945ccaa]	842	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
	843	help
	844	#-- All tests:
[1d5f3e3]	845	# Runs all the testsuites for both temporary tools (if
	846	# available) and final system
[e5d44f5]	847	endchoice
	848
	849	choice
	850	prompt "Flavour"
	851
	852	config NO_BOMB
[945ccaa]	853	bool "Don't stop on test failures"
[e5d44f5]	854
	855	config BOMB
[945ccaa]	856	bool "Abort the build on the first test failure"
[e5d44f5]	857	endchoice
	858
[945ccaa]	859	config TEST
	860	int
	861	default "0" if !CONFIG_TESTS
	862	default "1" if TST_1
	863	default "2" if TST_2
	864	default "3" if TST_3
	865
[e5d44f5]	866	config BOMB_TEST
	867	bool
	868	default n if NO_BOMB
	869	default y if BOMB
	870
	871	#--- End Test Suites
[945ccaa]	872	endmenu # test settings
[e5d44f5]	873
	874	#--- Package Management
	875	config PKGMNGT
	876	bool "Package management"
	877	depends BOOK_LFS \|\| BOOK_LFS_SYSD
	878	default n
	879	help
	880	#-- Use package management
	881	#
[945ccaa]	882	# If set, you'll have to choose between
	883	# two package management styles:
	884	# - Build and install:
	885	# the packages in the final phase are built
	886	# in a separate directory, PKG_DEST.
	887	# You should provide a bash function for
[4b2a5fd]	888	# packaging and installing the package.
[945ccaa]	889	# - Preload a library before install:
	890	# Run the install instructions inside a
	891	# wrapper command, which monitors the
	892	# installed files.
	893	#
[e5d44f5]	894	# Also, you have to provide the instructions
	895	# to build the package manager during the
	896	# temporary tools phase, in the form of a
	897	# sect1 of the book identical to a package
	898	# sect1. See README.PACKAGE_MANAGEMENT
	899	#
	900	# For now, this only works with LFS
[945ccaa]	901	choice
	902	depends PKGMNGT
	903	prompt "Package management style"
	904	default PKG_PACK
	905
	906	config PKG_PACK
	907	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	908
[945ccaa]	909	config LIB_LOAD
	910	bool "Preload a library before installing (porg style)"
	911	endchoice
	912
	913	config WRAP_INSTALL
	914	bool
	915	default y if LIB_LOAD
	916	default n if PKG_PACK
[e5d44f5]	917	#--- End package management
	918
	919	#--- Installed files logs
	920	config INSTALL_LOG
	921	bool "Create a log of installed files for each package"
	922	default n
	923	help
	924	#-- Select this if you want to create logs of the files
	925	# installed by each package on the final system.
	926
	927	#--- End Installed files logs
	928
[945ccaa]	929	config STRIP
	930	bool "Strip Installed Binaries/Libraries"
	931	default n
	932	depends on !BOOK_CLFS3
	933
[dc7fd7b]	934	config DEL_LA_FILES
[d2a7ec8]	935	bool "Remove libtool .la files"
[dc7fd7b]	936	default y
	937	help
	938	#-- Remove files libxxx.la installed by libtool. For a rationale
	939	# see https://blog.flameeyes.eu/tags/lafiles/
	940
[945ccaa]	941	config NO_PROGRESS_BAR
	942	bool "DO NOT use/display progress_bar "
	943	default n
	944	help
	945	#-- Do not use the progress bar routine. On slower machines
	946	# this function consumes precious CPU cycles.
	947
	948	#--- End Build Settings
	949	endmenu
	950
[6990d80]	951	menu "System configuration"
[945ccaa]	952	depends !BOOK_BLFS
	953
[e5d44f5]	954	#--- FSTAB
	955	config HAVE_FSTAB
	956	bool "Use a custom fstab file"
	957	default n
	958	help
	959	#-- Select this if you have an fstab file with entries
[945ccaa]	960	# for the target system
[a705708]	961
[e5d44f5]	962	config FSTAB
	963	string "Fstab file (optional)"
	964	default "*EDIT ME*"
	965	depends on HAVE_FSTAB
	966	help
	967	#-- The location of fstab file (if empty, a template is created)
	968	#--- End FSTAB
	969
	970	#--- Kernel
	971	config CONFIG_BUILD_KERNEL
	972	bool "Build the kernel"
	973	default n
	974	help
	975	#-- Select this option if you wish to build the kernel.
	976	#
	977	# You will be prompted for the full path to the .config
	978	# file. It will be copied to the 'sources' directory and
	979	# renamed kernel-config
	980
	981	config CONFIG
	982	string "Kernel config file"
	983	default "*EDIT ME*"
	984	depends on CONFIG_BUILD_KERNEL
	985	help
	986	#-- Fully qualified path to a kernel config file
	987	# The config file will be copied to ${BUILD_DIR}/sources
	988	# and renamed 'kernel-config'
	989	#--- End Kernel
	990
	991	config VIMLANG
	992	bool "Install vim-lang package"
	993	default n
	994	depends on !BOOK_HLFS && !BOOK_CLFS3
	995	help
	996	#-- Install the optional vim-lang package
	997	# NOTE: This option is obsolete with the 7.3 release of Vim
	998	# which is included in all recent releases of LFS.
	999
	1000	config TIMEZONE
	1001	string "TimeZone"
	1002	default "GMT"
	1003	help
	1004	#-- The timezone as output by tzselect
	1005	# This will be copied to /etc/localtime
	1006
	1007	config LANG
	1008	string "Language"
	1009	default "$LANG"
	1010	help
	1011	#-- LANG variable set in /etc/profile
	1012	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	1013	# for values (or the file localedata/SUPPORTED in glibc tarball)
	1014
	1015	config FULL_LOCALE
	1016	bool "Install the full set of locales"
	1017	default n
	1018	help
	1019	#-- If set to y, the full set of supported locales
	1020	# will be installed. Otherwise, only the minimal set
	1021	# necessary for the tests will be installed,
	1022	# together with the locale associated with the
	1023	# LANG you have chosen, if not in the minimal set.
	1024
	1025	#--- Groff page
	1026	choice
	1027	prompt "Groff page size"
	1028	default PAGE_LETTER
	1029	help
	1030	#-- Page definition for groff: letter or A4
	1031
	1032	config PAGE_LETTER
	1033	bool "letter"
	1034
	1035	config PAGE_A4
	1036	bool "A4"
	1037	endchoice
	1038
	1039	config PAGE
	1040	string
	1041	default "letter" if PAGE_LETTER
	1042	default "A4" if PAGE_A4
	1043	#--- End Groff page
[a705708]	1044
[945ccaa]	1045	config HOSTNAME
[6990d80]	1046	string "Hostname (see help)"
[945ccaa]	1047	default "EDITME"
[6990d80]	1048	help
	1049	If you are on a public network, use the hostname given to you by
	1050	your institution, or corporation, etc. If your network is private,
	1051	that is, behind a firewall such as a box to connect to your ISP,
	1052	you can choose anything you'd like. Combined with the domain name
	1053	"local", you have the possibility to access your computer by name
	1054	instead of address on the private network (see RFC 6762 and
	1055	https://www.howtogeek.com/167190/).
[945ccaa]	1056
	1057	menu "Network configuration"
	1058	config INTERFACE
	1059	string "netword card name"
	1060	default "eth0"
[6990d80]	1061	help
	1062	eth0 is used in most cases. Virtual insterfaces may get other
	1063	names (for example enp0s3 for the default network stack in qemu).
	1064	Systemd may also rename network interfaces according to their
	1065	bus addresses.
[945ccaa]	1066	config IP_ADDR
	1067	string "Static IP address"
	1068	default "10.0.2.9"
[6990d80]	1069	help
	1070	The default here is for a virtual interface in qemu. Private
	1071	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	1072	You have to know your network prefix. Then the last figure
	1073	may be anything you like.
	1074
[945ccaa]	1075	config GATEWAY
	1076	string "Gateway"
	1077	default "10.0.2.2"
[6990d80]	1078	help
	1079	Again, this default is for a qemu network stack. Usually, the
	1080	gateway is the address of your firewall.
[945ccaa]	1081	config PREFIX
	1082	string "Subnet prefix"
	1083	default "24"
[6990d80]	1084	help
	1085	Again, this default is for a qemu network stack, but is also
	1086	the most used in private networks.
[945ccaa]	1087	config BROADCAST
	1088	string "Broadcast address"
	1089	default "10.0.2.255"
	1090	config DOMAIN
[6990d80]	1091	string "Domain name (see help)"
	1092	default "local"
	1093	help
	1094	Domain Name:
	1095	Doamin names are registered, so if your computer is on a public
	1096	network, you cannot use any name you'd like. On a public
	1097	network, you should have been given a domain name by
	1098	your corporation, institution, etc.
	1099	If your network is really private, that is behind a firewall
	1100	such as a box for connecting to an ISP, you can choose any
	1101	domain you'd like. You can also opt for "local", see RFC 6762,
	1102	or "something.test", see RFC 6761.
[945ccaa]	1103	config DNS1
	1104	string "Primary Name server"
	1105	default "10.0.2.3"
	1106	config DNS2
	1107	string "Secondary Name server"
	1108	default "8.8.8.8"
	1109	endmenu # Network configuration
	1110
	1111	menu "Console configuration"
	1112	config FONT
	1113	string "Console font"
	1114	default "lat0-16"
	1115	config FONTMAP
	1116	string "Font map (-m option to setfont)"
	1117	default "8859-1"
	1118	config UNICODE
	1119	bool "Unicode mode"
	1120	default y
	1121	config KEYMAP
	1122	string "Keymap name"
	1123	default "us"
	1124	endmenu # Console configuration
	1125
	1126	endmenu #--- System configuration
[a705708]	1127
[e5d44f5]	1128	menu "Advanced Features"
	1129	depends !BOOK_BLFS
	1130
	1131	config REPORT
	1132	bool "Create SBU and disk usage report"
	1133	default y
	1134
	1135	#--- ICA/farce
	1136	config COMPARE
	1137	bool "Run comparison analysis on final stage"
	1138	depends !BOOK_CLFS2 && !BOOK_CLFS3
	1139	default n
	1140	help
	1141	#-- Should an iterative comparison analysis be performed?
	1142	#
	1143	# Unless you are familiar with ICA and/or FARCE do not
	1144	# select this option
	1145	#
	1146	# ICA and FARCE are analysis tools for comparing one
	1147	# build to the next. Builds mays differ from one iteration
	1148	# to another due to the build order and these tools try
	1149	# to ferret out those differences by examining the stored
	1150	# build logs and binary files.
	1151	#
	1152	# The scripts are well commented and can be found in ./extras/*
	1153	#
	1154
	1155	config ITERATIONS
	1156	int "Number of test runs (2,3,4,5)" if COMPARE
	1157	depends on COMPARE
	1158	range 2 5
	1159	default 3
	1160
	1161	config RUN_ICA
	1162	bool "ICA testing"
	1163	depends on COMPARE
	1164	default y
	1165	help
	1166	#-- Run ICA testing
	1167
	1168	config RUN_FARCE
	1169	bool "farce testing"
	1170	depends on COMPARE
	1171	default n
	1172	help
	1173	#-- Run farce testing
	1174	#--- End ICA/farce
	1175
	1176	#--- Optimizations
[0536270]	1177	if !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1178	config CONFIG_OPTIMIZE
	1179	bool "Optimization and parallelization"
	1180	default n
	1181	help
	1182	# Opens a menu for various optimization settings:
	1183	# Actual optimization flags MUST be defined in ./optimize/*
	1184	# before activating this option.
	1185	#
	1186	# WARNING: The use of build optimizations may lead to build issues.
	1187	# If the system doesn't work as expected, please rebuild
	1188	# without optimizations before asking for support.
	1189	menu "Optimization settings"
	1190	depends on CONFIG_OPTIMIZE
	1191
	1192	config N_PARALLEL
	1193	int "Number of parallel `make' jobs"
	1194	default 1
	1195	help
	1196	#-- The usual recommandation is (number of CPU cores)+1
	1197	# Do not set for meaningful SBU calculations.
	1198
	1199	choice
	1200	prompt "Optimization level "
	1201	default OPT_1
	1202	help
	1203	#-- Optimization values are set in optimize/* files
	1204
	1205	config OPT_1
	1206	bool "Final system only"
	1207
	1208	config OPT_2
	1209	bool "Both temp tools and final system"
	1210
	1211	config OPT_3
	1212	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
	1213	endchoice
[84a3fda]	1214
	1215	config REALSBU
	1216	bool "Build Binutls pass1 without optimization (Real SBU)"
	1217	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	1218	default n
	1219	help
	1220	#-- Use -j1 in make invokation for Binutils pass1 to
	1221	# get a valid SBU value.
	1222
[854854e]	1223	endmenu
[e5d44f5]	1224	config OPTIMIZE
	1225	int
	1226	default "0" if !CONFIG_OPTIMIZE
	1227	default "1" if OPT_1
	1228	default "2" if OPT_2
	1229	default "3" if OPT_3
[045b2dc]	1230	endif
[84a3fda]	1231
[e5d44f5]	1232	#--- End Optimizations
[a705708]	1233
[e5d44f5]	1234	#-- Internal Settings
	1235	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	1236
[e5d44f5]	1237	config SCRIPT_ROOT
	1238	string "Scripts root"
	1239	default "jhalfs"
[4da2512]	1240
[e5d44f5]	1241	config JHALFSDIR
	1242	string "jhalfs directory"
	1243	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	1244
[e5d44f5]	1245	config LOGDIRBASE
	1246	string "Build logs directory basename"
	1247	default "logs"
[93346ee]	1248
[e5d44f5]	1249	config LOGDIR
	1250	string "Build logs directory"
	1251	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	1252
[e5d44f5]	1253	config TESTLOGDIRBASE
	1254	string "Test suites logs directory basename"
	1255	default "test-logs"
[4da2512]	1256
[e5d44f5]	1257	config TESTLOGDIR
	1258	string "Test suites logs directory"
	1259	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	1260
[e5d44f5]	1261	config FILELOGDIRBASE
	1262	string "Installed files logs directory basename"
	1263	default "installed-files"
[93346ee]	1264
[e5d44f5]	1265	config FILELOGDIR
	1266	string "Installed files logs directory"
	1267	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1268
[e5d44f5]	1269	config ICALOGDIR
	1270	string "ICA logs directory"
	1271	default "$LOGDIR/ICA"
[4da2512]	1272
[e5d44f5]	1273	config FARCELOGDIR
	1274	string "farce logs directory"
	1275	default "$LOGDIR/farce"
[4da2512]	1276
[e5d44f5]	1277	config MKFILE
	1278	string "Makefile"
	1279	default "$JHALFSDIR/Makefile"
[4da2512]	1280
[e5d44f5]	1281	config XSL
	1282	string "XSL stylesheet"
	1283	default "$PROGNAME.xsl"
[4da2512]	1284
[e5d44f5]	1285	config PKG_LST
	1286	string "Package contents list"
	1287	default "unpacked"
[4da2512]	1288
[e5d44f5]	1289	#--- End Internal Settings
	1290	endmenu
[4da2512]	1291
[a705708]	1292	#--- End Advanced Features
	1293	endmenu
[7b6ecc5]	1294
[a16f769]	1295	config REBUILD_MAKEFILE
[e5d44f5]	1296	depends !BOOK_BLFS
	1297	bool "Rebuild the Makefile (see help)"
	1298	default n
	1299	help
	1300	#-- Rebuild the Makefile
	1301	#
	1302	# This option allows to rebuild the Makefile after
	1303	# customizing the base system build scripts.
	1304	#
	1305	# See README.CUSTOM for more info about this feature.
[7b6ecc5]	1306

Note: See TracBrowser for help on using the repository browser.

Download in other formats: