Context Navigation

source: Config.in@ 615ba88

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 615ba88 was f600e66, checked in by George Boudreau <georgeb@…>, 17 years ago
Correct typo in Config.in
Property mode set to `100644`
File size: 25.0 KB

Rev	Line
[a705708]	1	menu "--- BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	#-- Select the BOOK/Build style you wish to configure.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch"
	12
	13	config BOOK_CLFS
	14	bool "Cross-Compiled Linux From Scratch"
	15
	16	config BOOK_CLFS2
[abf2c47]	17	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
[a705708]	18
[2639f65]	19	config BOOK_CLFS3
	20	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
[a705708]	21
	22	config BOOK_HLFS
	23	bool "Hardened Linux From Scratch"
	24
[d3ce173]	25	config BOOK_BLFS
	26	bool "Beyond Linux From Scratch"
[a705708]	27	endchoice
	28
[4da2512]	29	config PROGNAME
	30	string
	31	default "lfs" if BOOK_LFS
	32	default "clfs" if BOOK_CLFS
	33	default "clfs2" if BOOK_CLFS2
[2639f65]	34	default "clfs3" if BOOK_CLFS3
[4da2512]	35	default "hlfs" if BOOK_HLFS
	36	default "blfs" if BOOK_BLFS
	37
[a705708]	38	config RUN_ME
	39	string
[4da2512]	40	default "./jhalfs run" if !BOOK_BLFS
	41	default "./blfs-tool" if BOOK_BLFS
[a705708]	42	#--- End BOOK/script
	43
	44	#--- Book version
	45	choice
	46	prompt "Release"
	47	default relSVN
	48	config relSVN
	49	bool "SVN"
	50	help
	51	#-- Current development version as in trunk
	52
	53	config WORKING_COPY
	54	bool "Working Copy"
[d3ce173]	55	depends on !BOOK_BLFS
[a705708]	56	help
	57	#-- A local working copy
	58
	59	config BRANCH
[0536270]	60	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	61	help
	62	#-- A supported SVN branch or stable released book
	63	endchoice
	64
	65	config BRANCH_ID
[401f81e]	66	string "Book Version (mandatory)"
[a705708]	67	default "EDIT ME"
	68	depends BRANCH
	69	help
	70	#-- A list of valid branches and stable books ID's is available here.
	71	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	72
	73	config BOOK
	74	string "Loc of working copy (mandatory)"
	75	default "EDIT ME"
	76	depends WORKING_COPY
	77	help
	78	#-- The full path to a local copy of the book XML sources
	79	#
	80	#--- End BOOK version
	81
	82	#--- CLFS specific params
	83	choice
	84	prompt "Target architecture"
	85	default ARCH_X86
[2639f65]	86	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[a705708]	87	help
[c63c0fa]	88	#-- Choose the target system base architecture
[a705708]	89
	90	config ARCH_X86
	91	bool "x86"
	92
	93	config ARCH_MIPS
[c5ff430]	94	bool "mips" if !BOOK_CLFS2
[a705708]	95
	96	config ARCH_PPC
[2035ea1]	97	bool "ppc" if BOOK_CLFS
[a705708]	98
	99	config ARCH_SPARC
[2035ea1]	100	bool "sparc" if BOOK_CLFS
[a705708]	101
	102	config ARCH_ALPHA
[7d6d6f7]	103	bool "alpha" if !BOOK_CLFS3
[a705708]	104
	105	config ARCH_ARM
[a87e07a]	106	bool "arm" if !BOOK_CLFS
[2035ea1]	107
	108	config ARCH_HPPA
	109	bool "hppa" if BOOK_CLFS2
[a705708]	110	endchoice
	111
[9bbf240]	112	choice
	113	prompt "Hardware Platform"
	114	depends BOOK_CLFS3 && ARCH_MIPS
	115	default PLATFORM_GENERIC
	116	help
	117	# Chose a destination platform
	118	# Platform specific files will be included
	119
	120	config PLATFORM_GENERIC
	121	bool "Generic platform"
[7d6d6f7]	122
[9bbf240]	123	config PLATFORM_WRT
	124	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	125	endchoice
[7d6d6f7]	126
[a705708]	127	choice
	128	prompt "Library"
[02c88a6]	129	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
	130	default DATA_32
[c63c0fa]	131	help
	132	#-- Choose the target system libraries type
[a705708]	133
	134	config DATA_32
[02c88a6]	135	bool "32-bit"
[a705708]	136
	137	config DATA_64
[02c88a6]	138	bool "64-bit" if !ARCH_PPC
[a705708]	139
	140	config DATA_MULTI
[9bbf240]	141	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
[a705708]	142	endchoice
	143
	144	choice
[2035ea1]	145	prompt "Processor type"
[a87e07a]	146	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_ARM && BOOK_CLFS3))
[c63c0fa]	147	help
	148	#-- Choose the target system processor
[a705708]	149
	150	config PROC_i486
[02c88a6]	151	bool "486 Compatibles" if ARCH_X86
[a705708]	152
	153	config PROC_i586
[02c88a6]	154	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	155
	156	config PROC_i686
[02c88a6]	157	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	158
	159	config PROC_mipsel
[2035ea1]	160	bool "MIPS Little Endian" if ARCH_MIPS
[a705708]	161
	162	config PROC_mips
[2035ea1]	163	bool "MIPS Big Endian" if ARCH_MIPS
	164
	165	config PROC_unknown
[c560e9a]	166	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	167
	168	config PROC_hppa1
	169	bool "PA 7000 Series" if ARCH_HPPA
	170
	171	config PROC_hppa2
	172	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	173
	174	config PROC_EV5
	175	bool "EV5 Series" if ARCH_ALPHA
	176
	177	config PROC_EV56
	178	bool "EV56 Series" if ARCH_ALPHA
	179
	180	config PROC_PCA56
	181	bool "PCA56 Series" if ARCH_ALPHA
	182
	183	config PROC_PCA57
	184	bool "PCA57 Series" if ARCH_ALPHA
	185
	186	config PROC_EV6
	187	bool "EV6 Series" if ARCH_ALPHA
	188
	189	config PROC_EV67
	190	bool "EV67 Series" if ARCH_ALPHA
	191
	192	config PROC_EV68
	193	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	194
	195	config PROC_ARM
	196	bool "Generic arm, little endian" if ARCH_ARM
	197
	198	config PROC_ARM5L
	199	bool "Generic arm, version 5, little endian" if ARCH_ARM
	200
	201	config PROC_ARM5B
	202	bool "Generic arm, version 5, big endian" if ARCH_ARM
[a705708]	203	endchoice
	204
[c63c0fa]	205	choice
	206	prompt "MIPS 64 ABI"
	207	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
	208	default ABI_64
	209	help
	210	#-- Choose the target system ABI to use
	211
	212	config ABI_32
	213	bool "o32"
	214
	215	config ABI_N32
	216	bool "n32"
	217
	218	config ABI_64
	219	bool "n64"
	220	endchoice
	221
[a705708]	222	config TARGET
	223	string
[02c88a6]	224	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	225	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	226	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[c5ff430]	227
[02c88a6]	228	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	229	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	230	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	231
[02c88a6]	232	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[2639f65]	233
[02c88a6]	234	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	235	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	236	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	237	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	238
[02c88a6]	239	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
[f600e66]	240	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
[02c88a6]	241	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	242	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	243
[02c88a6]	244	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	245	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && DATA_MULTI
[a705708]	246
[02c88a6]	247	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	248	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[2035ea1]	249
[c560e9a]	250	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
[02c88a6]	251	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	252	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	253
[a87e07a]	254	default "arm-unknown-linux-gnu" if ARCH_ARM && BOOK_CLFS2
	255
	256	default "arm-unknown-linux-uclibc" if PROC_ARM
	257	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	258	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
[c560e9a]	259
	260	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	261	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	262	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	263	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	264	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	265	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	266	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	267	default "alphaev68-unknown-linux-gnu" if PROC_EV68
[a705708]	268
	269	config TARGET32
	270	string
	271	depends DATA_MULTI
	272	default "i686-pc-linux-gnu" if ARCH_X86
[02c88a6]	273	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	274	default "mips-unknown-linux-gnu" if PROC_mips
[a705708]	275	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	276	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	277
[9bbf240]	278	config PLATFORM
	279	string
	280	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	281	default "WRT - Wireless Router" if PLATFORM_WRT
	282
[a705708]	283	config ARCH
	284	string
[02c88a6]	285	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	286	default "x86_64" if ARCH_X86 && DATA_MULTI
	287	default "x86_64-64" if ARCH_X86 && DATA_64
[a705708]	288
[9bbf240]	289	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	290
[02c88a6]	291	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	292	default "mips64" if ARCH_MIPS && DATA_MULTI
	293	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
[c5ff430]	294
[9bbf240]	295
[02c88a6]	296	default "ppc" if ARCH_PPC && DATA_32
	297	default "ppc64" if ARCH_PPC && DATA_MULTI
[a705708]	298
[02c88a6]	299	default "sparc" if ARCH_SPARC && DATA_32
	300	default "sparc64" if ARCH_SPARC && DATA_MULTI
	301	default "sparc64-64" if ARCH_SPARC && DATA_64
	302
	303	default "alpha" if ARCH_ALPHA
	304	default "arm" if ARCH_ARM
	305	default "hppa" if ARCH_HPPA
[7d6d6f7]	306
[c5ff430]	307	config MIPS_LEVEL
	308	string
	309	depends BOOK_CLFS3 && ARCH_MIPS
	310	default "1" if DATA_32
	311	default "3" if DATA_64
	312
[a99baaf]	313	config ABI
	314	string
	315	depends BOOK_CLFS3
[71a527c]	316	default "-m32" if ARCH_X86 \|\| ARCH_ARM
[c63c0fa]	317	# default "-m64" if NO USED YET IN THE BOOK
	318	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	319	default "-mabi=n32" if ABI_N32
	320	default "-mabi=64" if ABI_64
[2035ea1]	321
[a705708]	322	choice
	323	prompt "Build method"
	324	depends BOOK_CLFS
	325	help
	326	#-- What build method should be used: a chroot jail or minimal boot system
	327	# Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for a full explanation.
	328
	329	config BUILD_CHROOT
	330	bool "chroot"
	331
	332	config BUILD_BOOT
	333	bool "boot"
	334	endchoice
	335
	336	config METHOD
	337	string
	338	default "chroot" if BUILD_CHROOT
	339	default "boot" if BUILD_BOOT
	340
	341	config BOOT_CONFIG
	342	string "BOOT kernel config file (mandatory)"
	343	default "*EDIT ME*"
	344	depends on BUILD_BOOT
	345	help
	346	#-- If METHOD=boot, location of boot-kernel config file
	347	# The config file will be copied to ${BUILD_DIR}/sources
	348	# and renamed 'bootkernel-config'
	349	#
	350	# NOTE: this setting is required
	351	#--- End CLFS specific params
	352
	353	#--- HLFS specific params
[401f81e]	354	config GRSECURITY_HOST
[a705708]	355	bool "Building on grsecurity enabled host?"
	356	default n
	357	depends on BOOK_HLFS
	358	help
	359	#-- If your build system has grsecurity patches applied
	360	# you MUST enable this switch.
	361
	362	choice
	363	prompt "Library"
	364	depends on BOOK_HLFS
	365	help
	366	#-- Which library model to use: uClibc/glibc
	367
	368	config LIB_GLIBC
	369	bool "glibc"
	370
	371	config LIB_UCLIBC
	372	bool "uClibc"
	373	endchoice
	374
	375	config MODEL
	376	depends on BOOK_HLFS
	377	string
	378	default "glibc" if LIB_GLIBC
	379	default "uclibc" if LIB_UCLIBC
[5c575e1]	380
	381	choice
	382	prompt "Kernel series"
	383	depends on BOOK_HLFS
	384	help
	385	#-- Which kernel series to use: 2.6/2.4
	386
	387	config KERNEL_26
	388	bool "2.6 kernel series"
	389
	390	config KERNEL_24
	391	bool "2.4 kernel series"
	392	endchoice
	393
	394	config KERNEL
	395	depends on BOOK_HLFS
	396	string
	397	default "2.6" if KERNEL_26
	398	default "2.4" if KERNEL_24
[d035526]	399
[6d5844c]	400	# menu "HLFS Additional Features"
	401	# depends on BOOK_HLFS
	402	#
	403	# config SET_SSP
	404	# bool "Stack-smashing protector"
	405	# default y
	406	#
	407	# config SET_ASLR
	408	# bool "Address-space layout randomization"
	409	# default y
	410	#
	411	# config SET_PAX
	412	# bool "PaX-aware ELF executables and kernel"
	413	# default y
	414	#
	415	# config SET_HARDENED_TMP
	416	# bool "Hardened temporary files creation"
	417	# default y
	418	#
	419	# config SET_WARNINGS
	420	# bool "Additional warnings"
	421	# default y
	422	#
	423	# config SET_MISC
	424	# bool "Miscellaneous features"
	425	# default y
	426	#
	427	# config SET_BLOWFISH
	428	# bool "Blowfish passwords"
	429	# default y
	430	# endmenu
[d035526]	431
	432	config SSP
[249fa6a]	433	# depends on SET_SSP
[d035526]	434	string
	435	default ",ssp,"
	436
	437	config ASLR
[249fa6a]	438	# depends on SET_ASLR
[d035526]	439	string
	440	default ",aslr,"
	441
	442	config PAX
[249fa6a]	443	# depends on SET_PAX
[d035526]	444	string
	445	default ",pax,"
	446
	447	config HARDENED_TMP
[249fa6a]	448	# depends on SET_HARDENED_TMP
[d035526]	449	string
	450	default ",hardened_tmp,"
	451
	452	config WARNINGS
[249fa6a]	453	# depends on SET_WARNINGS
[d035526]	454	string
	455	default ",warnings,"
	456
	457	config MISC
[249fa6a]	458	# depends on SET_MISC
[d035526]	459	string
	460	default ",misc,"
	461
	462	config BLOWFISH
[249fa6a]	463	# depends on SET_BLOWFISH
[d035526]	464	string
	465	default ",blowfish,"
[a705708]	466	#--- End HLFS specific params
	467
[53f291f]	468	#--- Custom Tools support
	469	config CUSTOM_TOOLS
[3e7ceed]	470	bool "Add custom tools support"
[53f291f]	471	default n
[3e7ceed]	472	depends on !BOOK_BLFS
[53f291f]	473	help
	474	#--- Activating this option additional packages you create
[3e7ceed]	475	# will be installed after finished the xLFS system build.
[53f291f]	476	#
	477	#--- End Custom Tools support
	478
[4965fa8]	479	#--- blfs-tool Support
	480	config BLFS_TOOL
	481	bool "Add blfs-tool support"
	482	default n
[cd4466f]	483	depends on !BOOK_BLFS && !BOOK_CLFS3
[4965fa8]	484	help
	485	#--- Activating this option additional packages needed to
	486	# use blfs-tool will be installed.
	487	#
	488	# The blfs-tool files will be installed under
	489	# $BUILD_DIR/blfs_root.
	490
	491	# After booting the new xLFS system you should to
[cd4466f]	492	# create an user account and move the /blfs-root
[4965fa8]	493	# directory to the user's home, making he the
	494	# directory and files owner, before start
	495	# using blfs-tool.
	496	#
[7b84722]	497	# Also, be sure to bring to that user read and write
	498	# privileges over the $TRACKING_DIR directory and
	499	# the files that it contains.
[4965fa8]	500	#
	501	# And don't forget to configure sudo properly.
	502
	503	choice
	504	prompt "BLFS Release"
	505	default BLFS_SVN
	506	depends on BLFS_TOOL
	507	config BLFS_SVN
	508	bool "BLFS SVN"
	509	help
	510	#-- Current development version as in trunk
	511
	512	config BLFS_BRANCH
	513	bool "BLFS Branch or stable book"
	514	help
	515	#-- A supported SVN branch or stable released book
	516	endchoice
	517
	518	config BLFS_BRANCH_ID
	519	string "BLFS Book Version (mandatory)"
	520	default "EDIT ME"
	521	depends on BLFS_BRANCH
	522	help
	523	#-- A list of valid branches and stable books ID's is available here.
	524	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	525
	526	menu "blfs-tool dependencies"
	527	depends on BLFS_TOOL
	528
	529	config DEP_LIBXML
	530	bool "libxml2 (required)"
	531	default y
	532
	533	config DEP_LIBXSLT
	534	bool "libxslt (required)"
	535	default y
	536
[045b2dc]	537	config DEP_TIDY
	538	bool "tidy (required)"
	539	default y
	540
	541	config DEP_DBXML
	542	bool "DocBook XML DTD (required)"
	543	default y
	544
	545	config DEP_UNZIP
	546	bool "UnZip (required to install DocBook XML DTD)"
	547	default y
	548	depends on DEP_DBXML
	549
[4965fa8]	550	config DEP_DBXSL
	551	bool "DocBook XSL (required)"
	552	default y
	553
	554	config DEP_LINKS
	555	bool "links (required)"
	556	default y
	557
	558	config DEP_SUDO
	559	bool "sudo (recommended)"
	560	default y
	561
	562	config DEP_WGET
	563	bool "wget (recommended)"
	564	default y
	565
	566	config DEP_SVN
	567	bool "SVN client (optional)"
	568	default y
	569
	570	config DEP_GPM
	571	bool "GPM (optional, see help)"
	572	default y
	573	help
	574	#-- You MUST to install manually the gpm bootscript
	575	# and create its configuration file
	576	endmenu
	577	#--- End blfs-tool Support
	578
[d3ce173]	579	#--- BLFS specific params
	580	config BLFS_ROOT
	581	string "Directory root"
[4965fa8]	582	default "$HOME/blfs_root" if BOOK_BLFS
	583	default "/blfs_root" if BLFS_TOOL
	584	depends on BOOK_BLFS \|\| BLFS_TOOL
[d3ce173]	585	help
	586	#-- Full path to the directory where all required
	587	# files and scripts will be stored.
	588
	589	config BLFS_XML
	590	string "BLFS sources directory"
	591	default "blfs-xml"
[4965fa8]	592	depends on BOOK_BLFS \|\| BLFS_TOOL
[d3ce173]	593	help
[4965fa8]	594	#-- The directory name under $BLFS_ROOT where BLFS book
	595	# sources will be checkout.
[f4ed135]	596
	597	config TRACKING_DIR
	598	string "Installed packages database directory"
	599	default "/var/lib/jhalfs/BLFS"
[53f291f]	600	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
[f4ed135]	601	help
	602	#-- Full path to the directory where the installed
	603	# packages database will be created.
	604	#
[53f291f]	605	# If you are installing blfs-tool on a running xLFS system
	606	# you MUST to create manually this directory.
	607	#
	608	# If you are installing blfs-tool as part of a xLFS build
	609	# and/or using the customized scripts feature, you will
	610	# need to fix that directory permissions after booting
	611	# the new system.
[4965fa8]	612	#
[f4ed135]	613	# Note that the user that will build the packages must
	614	# have read and write privileges on that directory.
[d3ce173]	615	#--- End BLFS specific params
[53f291f]	616
[a705708]	617	#--- End BOOK Settings
	618	endmenu
	619
	620	menu "--- General Settings"
[d3ce173]	621	depends on !BOOK_BLFS
[a705708]	622
	623	#--- Set User Account
	624	config CONFIG_USER
[962793a]	625	bool "Change the default user/group and homedir for this build"
[a705708]	626	default n
	627	help #-- Unprivileged user and group name
	628	# If you do not have the priv to create/delete
	629	# users and groups you can specifiy your own
	630	# user id for the build
	631	#
	632	# default values for each book
[962793a]	633	# LFS lfs
	634	# CLFS* clfs
	635	# HLFS hlfs
	636	#
	637	# Also, if your host place users home dirs into a
	638	# directory other than /home you can specify it here.
[a705708]	639
	640	config DEF_USER
	641	string
	642	default "lfs" if BOOK_LFS
[2639f65]	643	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[a705708]	644	default "hlfs" if BOOK_HLFS
	645
	646	config SET_USER
	647	string "User account"
	648	depends CONFIG_USER
	649	default DEF_USER
	650
	651	config CONFIG_GROUP
	652	bool "Set Group?"
	653	default n
	654	depends CONFIG_USER
	655
	656	config SET_GROUP
	657	string "GROUP account"
	658	depends CONFIG_GROUP
	659	default DEF_USER
	660
[962793a]	661	config CONFIG_HOME
	662	bool "Set home dir?"
	663	default n
	664	depends CONFIG_USER
	665
	666	config SET_HOME
	667	string "Path to the directory where user home dir will be created"
	668	depends CONFIG_HOME
	669	default "/home"
	670
[a705708]	671	config LUSER
	672	string
	673	default DEF_USER if !CONFIG_USER
	674	default SET_USER if CONFIG_USER
	675
	676	config LGROUP
	677	string
	678	default LUSER if !CONFIG_GROUP
	679	default SET_GROUP if CONFIG_GROUP
[962793a]	680
	681	config LHOME
	682	string
	683	default "/home" if !CONFIG_HOME
	684	default SET_HOME if CONFIG_HOME
[a705708]	685	#--- End Set User Account
	686
	687	config BUILDDIR
	688	string "Build Directory"
	689	default "/mnt/build_dir"
	690	help
	691	#-- The directory where the created system will be located.
	692
[401f81e]	693	config GETPKG
[a705708]	694	bool "Retrieve source files"
	695	default n
	696	help
	697	#-- Download all packages and patches required by the book selected
	698	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	699	# first and if necessary retrieve them from the 'net.
	700	# Files will be transfered to $BUILDDIR/sources.
	701
	702	config SRC_ARCHIVE
	703	string "Package Archive Directory"
	704	default "$SRC_ARCHIVE"
[401f81e]	705	depends GETPKG
[a705708]	706	help
	707	#-- A local archive for packages/file (not $BUILDDIR/sources)
	708	# Used only if GETPKG = 1
	709	# Any missing file will be downloaded and archived here,
	710	# if the user has the right priviledges.
	711
[4da2512]	712	config SERVER
	713	string "FTP mirror"
	714	default "ftp://ftp.lfs-matrix.net"
	715	depends GETPKG
	716	help
	717	#-- FTP mirror to download packages and patches if not found
	718	# in $SRC_ARCHIVE
	719	# As a last resort, the files will dowloaded from upstream,
	720	# if possible.
	721
[401f81e]	722	config GETKERNEL
[3d7b6621]	723	bool "Always retrieve kernel package (see help)"
[7e45406]	724	default y if BOOK_LFS \|\| BOOK_HLFS
[401f81e]	725	depends GETPKG
[a705708]	726	help
[3d7b6621]	727	#-- Get the kernel package and patches even if no kernel
	728	# configuration file has been supplied.
	729
	730	# NOTE:
	731	# The kernel package must be available when building
[7e45406]	732	# the SVN version of LFS or HLFS to can install the
	733	# headers files.
	734	#
	735	# If building LFS-6.2 this setting can be disabled.
[a705708]	736
[401f81e]	737	config RUNMAKE
[a705708]	738	bool "Run the makefile"
	739	default n
	740	help
	741	#-- Automatically run the makefile once it has been created
	742
[401f81e]	743	config CLEAN
[a705708]	744	bool "Rebuild files"
	745	default n
	746	help
	747	#-- Clean the build directory before performing any other task.
	748	# The directory is cleaned only if it was populated by a
	749	# previous JHALFS run.
	750	#
	751
	752	#--- End General Settings
	753	endmenu
	754
	755	menu "--- Build Settings"
[d3ce173]	756	depends on !BOOK_BLFS
[a705708]	757
	758	#--- Test Suites
	759	config CONFIG_TESTS
	760	bool "Run testsuites"
[0536270]	761	depends !BOOK_CLFS2 && !BOOK_CLFS3
[401f81e]	762	default y
[a705708]	763	help
	764	#-- Run test suites
	765	#
	766	# You will can to select between:
	767	#
	768	# - Only final system Glibc, GCC and Binutils testsuites
	769	# - All final system testsuites
	770	# - Both temporary tools and final system testsuites
	771	#
	772	# HLFS and CLFS has no testsuites available in the
	773	# temporary tools phase
	774
	775	# You will be promt also about the "flavour" of the
	776	# testsuites run:
	777	#
	778	# - Don't stop on test suite failures
	779	# - Abort the build at the first test suite failure
	780	#
	781
	782	choice
[8e3ccf7]	783	prompt "Tests level"
[a705708]	784	depends CONFIG_TESTS
	785	default TEST_1
	786
	787	config TST_1
	788	bool "Only final system Glibc, GCC and Binutils testsuites"
	789
	790	config TST_2
	791	bool "All final system testsuites"
	792
	793	config TST_3
	794	bool "Both temporary tools and final system testsuites" if !BOOK_HLFS && !BOOK_CLFS
	795	endchoice
	796
	797	config TEST
	798	int
	799	default "0" if !CONFIG_TESTS
	800	default "1" if TST_1
	801	default "2" if TST_2
	802	default "3" if TST_3
	803
	804	choice
[8e3ccf7]	805	prompt "Flavour"
[a705708]	806	depends CONFIG_TESTS
	807
	808	config NO_BOMB
	809	bool "Don't stop on test suite failures"
	810
	811	config BOMB
	812	bool "Abort the build at the first test suite failure"
	813	endchoice
	814
	815	config BOMB_TEST
[401f81e]	816	bool
[8e3ccf7]	817	default n if NO_BOMB
	818	default y if BOMB
[401f81e]	819
[a705708]	820	#--- End Test Suites
	821
[93346ee]	822	#--- Installed files logs
	823	config INSTALL_LOG
	824	bool "Create installed files logs"
	825	default n
	826	help
	827	#-- Select this if you want to create logs of the files
	828	# installed by each package on the final system.
	829
	830	#--- End Installed files logs
	831
[a705708]	832	#--- FSTAB
	833	config HAVE_FSTAB
	834	bool "Use a custom fstab file"
	835	default n
	836	help
	837	#-- Select this if you have ready a proper fstab file
	838
	839	config FSTAB
	840	string "Fstab file (optional)"
	841	default "*EDIT ME*"
	842	depends on HAVE_FSTAB
	843	help
	844	#-- The location of fstab file (if empty, a template is created)
	845	#--- End FSTAB
	846
	847	#--- Kernel
	848	config CONFIG_BUILD_KERNEL
	849	bool "Build the kernel"
	850	default n
	851	help
	852	#-- Select this option if you wish to build the kernel.
	853	#
	854	# You will be prompted for the full path to the .config
	855	# file. It will be copied to the 'sources' directory and
	856	# rename kernel-config
	857
	858	config CONFIG
	859	string "Kernel config file"
	860	default "*EDIT ME*"
	861	depends on CONFIG_BUILD_KERNEL
	862	help
	863	#-- Fully qualified path to a kernel config file
	864	# The config file will be copied to ${BUILD_DIR}/sources
	865	# and renamed 'kernel-config'
	866	#--- End Kernel
	867
[401f81e]	868	config STRIP
[a705708]	869	bool "Strip Installed Binaries/Libraries"
	870	default y
[b230bd6]	871	depends on !BOOK_CLFS3
[a705708]	872
[401f81e]	873	config VIMLANG
[a705708]	874	bool "Install vim-lang package"
	875	default y
[1b9ceec]	876	depends on !BOOK_HLFS && !BOOK_CLFS3
[a705708]	877	help
[401f81e]	878	#-- Install the optional vim-lang package
[a705708]	879
	880	config TIMEZONE
	881	string "TimeZone"
	882	default "GMT"
	883	help
	884	#-- The timezone as output by tzselect
	885	# This will be copied to /etc/localtime
	886
	887	config LANG
	888	string "Language"
	889	default "$LANG"
	890	help
	891	#-- Language information in /etc/profile See <locale -a> for values
	892
	893	#--- Groff page
	894	choice
	895	prompt "Groff page size"
	896	default PAGE_LETTER
	897	help
	898	#-- Page definition for groff: letter or A4
	899
	900	config PAGE_LETTER
	901	bool "letter"
	902
	903	config PAGE_A4
	904	bool "A4"
	905	endchoice
	906
	907	config PAGE
	908	string
	909	default "letter" if PAGE_LETTER
	910	default "A4" if PAGE_A4
	911	#--- End Groff page
	912
	913	#--- End Build Settings
	914	endmenu
	915
	916	menu "--- Advanced Features"
[d3ce173]	917	depends on !BOOK_BLFS
[a705708]	918
[401f81e]	919	config REPORT
[a705708]	920	bool "Create SBU and disk usage report"
	921	default y
	922
	923	#--- ICA/farce
[401f81e]	924	config COMPARE
[a705708]	925	bool "Run comparison analysis on final stage"
[0536270]	926	depends !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	927	default n
	928	help
	929	#-- Should some iterative comparison analysis by made?
	930	#
	931	# Unless you are familiar with ICA and/or FARCE do not
	932	# select this option
	933	#
	934	# ICA and FARCE are analysis tools for comparing one
	935	# build to the next. Builds mays differ from one iteration
	936	# to another due to the build order and these tools try
	937	# to ferret out those differences by examining the stored
	938	# build logs and binary files.
	939	#
	940	# The scripts are well commented and can be found in ./extras/*
	941	#
	942
	943	config ITERATIONS
[401f81e]	944	int "Number of test runs (2,3,4,5)" if COMPARE
	945	depends on COMPARE
[a705708]	946	range 2 5
	947	default 3
	948
[401f81e]	949	config RUN_ICA
[a705708]	950	bool "ICA testing"
[401f81e]	951	depends on COMPARE
[a705708]	952	default y
	953	help
	954	#-- Run ICA testing
	955
[401f81e]	956	config RUN_FARCE
[a705708]	957	bool "farce testing"
[401f81e]	958	depends on COMPARE
[a705708]	959	default n
	960	help
	961	#-- Run farce testing
	962	#--- End ICA/farce
	963
[4da2512]	964	#--- Optimizations
[0536270]	965	if !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	966	config CONFIG_OPTIMIZE
[4da2512]	967	bool "Use optimization (see help)"
[a705708]	968	default n
	969	help
	970	#-- Actual optimzation flags MUST be defined in ./optimize/*
	971	# files before activate this option.
	972	#
	973	# WARNING: The use of build optimizations may be dangerous.
	974	# You should know what you are doing and be sure that the
	975	# optimization settings listed below are what you want.
	976	# It there are build issues or the system doesn't work as
	977	# expected, please rebuild without optimizations before
	978	# asking for support.
	979
	980	choice
	981	prompt "Optimization level "
	982	default OPT_1
	983	depends CONFIG_OPTIMIZE
	984	help
	985	#-- Optimization values are set in optimize/* files
	986
	987	config OPT_1
	988	bool "Final system only"
	989
	990	config OPT_2
	991	bool "Both temp tools and final system"
	992	endchoice
	993
	994	config OPTIMIZE
	995	int
	996	default "0" if !CONFIG_OPTIMIZE
	997	default "1" if OPT_1
	998	default "2" if OPT_2
[045b2dc]	999	endif
[a705708]	1000	#--- End Optimizations
	1001
[4da2512]	1002	#-- Internal Settings
	1003	menu "--- Internal Settings (WARNING: for jhalfs developers only)"
	1004
	1005	config SCRIPT_ROOT
	1006	string "Scripts root"
	1007	default "jhalfs"
	1008
	1009	config JHALFSDIR
	1010	string "jhalfs directory"
	1011	default "$BUILDDIR/$SCRIPT_ROOT"
	1012
[93346ee]	1013	config LOGDIRBASE
	1014	string "Build logs directory basename"
	1015	default "logs"
	1016
[4da2512]	1017	config LOGDIR
	1018	string "Build logs directory"
[93346ee]	1019	default "$JHALFSDIR/$LOGDIRBASE"
	1020
	1021	config TESTLOGDIRBASE
	1022	string "Test suites logs directory basename"
	1023	default "test-logs"
[4da2512]	1024
	1025	config TESTLOGDIR
	1026	string "Test suites logs directory"
[93346ee]	1027	default "$JHALFSDIR/$TESTLOGDIRBASE"
	1028
	1029	config FILELOGDIRBASE
	1030	string "Installed files logs directory basename"
	1031	default "installed-files"
	1032
	1033	config FILELOGDIR
	1034	string "Installed files logs directory"
	1035	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1036
	1037	config ICALOGDIR
	1038	string "ICA logs directory"
	1039	default "$LOGDIR/ICA"
	1040
	1041	config FARCELOGDIR
	1042	string "farce logs directory"
	1043	default "$LOGDIR/farce"
	1044
	1045	config MKFILE
	1046	string "Makefile"
	1047	default "$JHALFSDIR/Makefile"
	1048
	1049	config XSL
	1050	string "XSL stylesheet"
	1051	default "$PROGNAME.xsl"
	1052
	1053	config PKG_LST
	1054	string "Package contents list"
	1055	default "unpacked"
	1056
	1057	#--- End Internal Settings
	1058	endmenu
	1059
[a705708]	1060	#--- End Advanced Features
	1061	endmenu
[7b6ecc5]	1062
[a16f769]	1063	config REBUILD_MAKEFILE
[7b6ecc5]	1064	bool "Rebuild the Makefile (see help)"
	1065	default n
	1066	depends on !BOOK_BLFS
	1067	help
	1068	#-- Rebuild the Makefile
	1069	#
	1070	# This option alow to rebuild the Makefile after
	1071	# customizing the base system build scripts.
	1072	#
	1073	# See README.CUSTOM for more info about this feature.
	1074

Note: See TracBrowser for help on using the repository browser.

Download in other formats: