Context Navigation

source: Config.in@ 875366f

ablfs-more trunk

Last change on this file since 875366f was d54e3c9, checked in by Pierre Labastie <pierre.labastie@…>, 2 years ago

Remove the "Abort on testsuite failure" config (1)

Remove the choice in Config.in.
Remove the BOMB_TEST variable from configuration.

Property mode set to 100644

File size: 29.5 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config RUN_ME
	49	string
[e3f41e33]	50	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	51	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	52	#--- End BOOK/script
	53
	54	#--- Book version
	55	choice
[f45af2c]	56	prompt "Book version"
	57	default BRANCH
[e5d44f5]	58
[f45af2c]	59	config BRANCH
	60	bool "Branch (default to trunk) or any commit"
[e5d44f5]	61	help
[a2917ed]	62	Use an LFS book downloaded from the git repository, and
	63	checked out at any commit (branch/tag/sha)
[e5d44f5]	64
	65	config WORKING_COPY
	66	bool "Working Copy"
	67	help
[a2917ed]	68	Use a local working copy of the LFS book
[e5d44f5]	69	endchoice
	70
[f45af2c]	71	config COMMIT
	72	string "Branch, tag, or any commit"
	73	default "trunk"
[f596dde]	74	depends on BRANCH
[e5d44f5]	75	help
[f45af2c]	76	Enter a branch, a tag, or an abbreviated commit sha.
	77	The tool will clone the LFS repository and checkout
	78	that commit
[e5d44f5]	79
	80	config BOOK
	81	string "Loc of working copy (mandatory)"
	82	default "EDIT ME"
[f596dde]	83	depends on WORKING_COPY
[e5d44f5]	84	help
[a2917ed]	85	The full path to a local copy of the LFS book XML sources
[e5d44f5]	86
[13e52a5]	87	choice
[a2917ed]	88	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[13e52a5]	89	prompt "Mutilib"
	90	default LFS_MULTILIB_NO
	91	config LFS_MULTILIB_NO
	92	bool "Standard LFS on i686 or amd64"
	93	help
[b6e981a]	94	Use standard LFS book (choose this if not multilib source)
[13e52a5]	95
	96	config LFS_MULTILIB_I686
	97	bool "Multilib LFS on amd64 with i686 libraries"
	98	help
	99	Use Multilib LFS book with i686 libraries
	100
	101	config LFS_MULTILIB_X32
	102	bool "Multilib LFS on amd64 with x32 libraries"
	103	help
	104	Use Multilib LFS book with x32 libraries
	105
	106	config LFS_MULTILIB_ALL
	107	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	108	help
	109	Use Multilib LFS book with i686 and x32 libraries
	110
	111	endchoice
	112
	113	config MULTILIB
	114	string
	115	default "default" if LFS_MULTILIB_NO
	116	default "ml_32" if LFS_MULTILIB_I686
	117	default "ml_x32" if LFS_MULTILIB_X32
	118	default "ml_all" if LFS_MULTILIB_ALL
	119
[e5d44f5]	120	#--- End BOOK version
	121
	122	choice
	123	prompt "Build method"
[e3f41e33]	124	default BUILD_CHROOT
[a2917ed]	125	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[e5d44f5]	126	help
	127	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	128	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	129	a full explanation.
	130
	131	config BUILD_CHROOT
	132	bool "chroot"
	133
	134	config BUILD_BOOT
	135	bool "boot"
	136	endchoice
	137
	138	config METHOD
	139	string
	140	default "chroot" if BUILD_CHROOT
	141	default "boot" if BUILD_BOOT
	142
	143	config BOOT_CONFIG
	144	string "BOOT kernel config file (mandatory)"
	145	default "*EDIT ME*"
	146	depends on BUILD_BOOT
	147	help
	148	If METHOD=boot, location of boot-kernel config file
	149	The config file will be copied to ${BUILD_DIR}/sources
	150	and renamed 'bootkernel-config'
	151	NOTE: this setting is required
	152
	153	#--- blfs-tool Support
	154	config BLFS_TOOL
	155	bool "Add blfs-tool support"
	156	default n
[e3f41e33]	157	depends on !BOOK_BLFS
[e5d44f5]	158	help
	159	Activating this option will install additional packages needed
	160	to use blfs tools after booting the new system.
	161	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	162	(see below).
	163	After booting the new xLFS system, but before using the blfs tools,
	164	you should create a user account, move the /blfs_root directory
	165	to that user's home, and change its ownership to that of the user.
	166	Also, be sure to give the user read and write access on the
	167	$TRACKING_DIR directory and the files that it contains.
	168	Don't forget to configure sudo properly on the new system.
	169
	170	config DUMMY # Avoid indenting the items below
	171	bool
	172
	173	if BLFS_TOOL
	174	menu "blfs-tool dependencies"
	175
	176	config DEP_LIBXML
	177	bool "libxml2 (required)"
	178	default y
	179
	180	config DEP_LIBXSLT
	181	bool "libxslt (required)"
	182	default y
	183
	184	config DEP_DBXML
	185	bool "DocBook XML DTD (required)"
	186	default y
	187
	188	config DEP_LYNX
	189	bool "lynx (optional, for reading the generated book)"
	190	default y
	191
[7f25c70]	192	config DEP_SUDO
	193	bool "sudo (recommended)"
	194	default y
	195
[e5d44f5]	196	config DEP_WGET
	197	bool "wget (recommended)"
	198	default y
	199
	200	config DEP_GPM
	201	bool "GPM (optional, see help)"
	202	default n
	203	help
	204	if you install gpm, it will be started
[90f5b6d]	205	automatically on boot. It allows copy-paste
	206	while Xorg is not installed.
[e5d44f5]	207
[1e686d1]	208	config DEP_GIT
	209	bool "GIT client (optional, see help)"
[e5d44f5]	210	default n
	211	help
[1e686d1]	212	Git is needed for updating the book
[90f5b6d]	213	sources. You do not need it if building a
	214	stable book.
[e5d44f5]	215
	216	endmenu
	217
	218	choice
[9b99ada]	219	prompt "BLFS book version"
	220	default BLFS_BRANCH
[e5d44f5]	221
[9b99ada]	222	config BLFS_BRANCH
	223	bool "BLFS Branch (default trunk) or any commit"
[e5d44f5]	224	help
[9b99ada]	225	Use a BLFS book downloaded from the git repository, and
	226	checked out at any commit (branch/tag/sha).
[e5d44f5]	227
	228	config BLFS_WORKING_COPY
	229	bool "BLFS working copy"
	230	help
[9b99ada]	231	Use a local working copy of the BLFS book.
[e5d44f5]	232	endchoice
	233
	234	config BLFS_WC_LOCATION
	235	string "Location of the local BLFS working copy (mandatory)"
	236	default "EDIT ME"
	237	depends on BLFS_WORKING_COPY
	238	help
[506120ee]	239	Full path to the BLFS book working copy
[e5d44f5]	240
[9b99ada]	241	config BLFS_COMMIT
	242	string "BLFS Book commit (branch/tag/sha)"
	243	default "trunk"
[e5d44f5]	244	depends on BLFS_BRANCH
	245	help
[f45af2c]	246	Can be any branch, tag, or abbreviated (or not) commit sha.
[e5d44f5]	247	endif
	248	#--- End blfs-tool Support
	249
	250	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	251	# or directly)
	252	config BLFS_ROOT
	253	string "Root of the tools directory (see help)"
	254	default "/blfs_root"
	255	depends on BLFS_TOOL \|\| BOOK_BLFS
	256	help
	257	Path to the directory where all required files and scripts
	258	will be stored.
	259
	260	This path must begin with a slash, and:
	261	- is relative to the user's HOME directory when installing the
	262	blfs tools on an already existing LFS system.
	263	- is relative to the root of the build directory (`/' in chroot)
	264	when adding the tools after a jhalfs run
	265
	266	CAUTION: this directory will be removed if it already exists.
	267
	268	config BLFS_XML
	269	string "BLFS sources directory (internal parameter)"
	270	default "blfs-xml"
[f596dde]	271	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	272	help
	273	The directory name under $BLFS_ROOT where the BLFS
	274	book sources will be copied or checked out. Do not change that
	275	unless you know what you are doing...
[506120ee]	276
[f733772]	277	config LFS_XML
	278	string "LFS sources directory (internal parameter)"
	279	default "lfs-xml"
[f596dde]	280	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	281	help
	282	The directory name under $BLFS_ROOT where the LFS
	283	book sources will be copied or checked out. Do not change that
	284	unless you know what you are doing...
	285
[506120ee]	286	choice
[9b99ada]	287	prompt "LFS book version"
	288	default LFS_BRANCH
[f596dde]	289	depends on BOOK_BLFS
[506120ee]	290
[9b99ada]	291	config LFS_BRANCH
	292	bool "LFS branch (default trunk) or any commit"
[506120ee]	293	help
[9b99ada]	294	Use an LFS book downloaded from the git repository and
	295	checked out at any commit (branch/tag/sha).
[506120ee]	296
	297	config LFS_WORKING_COPY
	298	bool "LFS working copy"
	299	help
[9b99ada]	300	Use a local working copy of the LFS book.
[506120ee]	301	endchoice
	302
	303	config BLFS_LFS_BOOK
	304	string "Location of the local LFS working copy (mandatory)"
	305	default "EDIT ME"
	306	depends on LFS_WORKING_COPY
	307	help
	308	Full path to the LFS book working copy"
	309
[9b99ada]	310	config BLFS_LFS_COMMIT
	311	string "LFS Book Commit (mandatory)"
	312	default "trunk"
[506120ee]	313	depends on LFS_BRANCH
	314	help
[f45af2c]	315	Any branch, tag or abbreviated (or not) commit sha.
[e5d44f5]	316	# End of BLFS parameters
	317
	318	#--- Custom Tools support
	319	config CUSTOM_TOOLS
[f596dde]	320	depends on !BOOK_BLFS
[e5d44f5]	321	bool "Add custom tools support"
	322	default n
	323	help
	324	Activating this option additional packages you create
	325	will be installed after finished the xLFS system build.
	326	#--- End Custom Tools support
	327
[e3ccc27]	328	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	329	# As well.
	330	config TRACKING_DIR
	331	string "Installed packages database directory"
	332	default "/var/lib/jhalfs/BLFS"
	333	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	334	help
	335	Full path to the directory where the database of
	336	installed packages will be created.
	337
	338	If the blfs tools are installed on a running xLFS system,
	339	the user must have enough privileges to create this directory.
	340	It may be necessary to create the /var/lib/jhalfs directory as
	341	root, and make it writable by the user before running this tool.
	342
	343	If you are installing the blfs tools as part of an xLFS build
	344	and/or using the customized scripts feature, you will
	345	need to fix this directory's permissions after booting
	346	the new system.
	347
[f45af2c]	348	Note that the user who will build the packages must
[e5d44f5]	349	have read and write access to this directory.
[53f291f]	350
[a705708]	351	#--- End BOOK Settings
	352	endmenu
	353
[e5d44f5]	354	menu "General Settings"
[e3ccc27]	355	depends on !BOOK_BLFS
[e5d44f5]	356
[f45af2c]	357	#--- LFS User Account
[b7583ec]	358
	359	config LUSER
[e5d44f5]	360	string
[f45af2c]	361	default "lfs"
[e5d44f5]	362
	363	config LGROUP
	364	string
[b7583ec]	365	default LUSER
[e5d44f5]	366
	367	config LHOME
	368	string
[b7583ec]	369	default "/home"
	370
[e5d44f5]	371	#--- End Set User Account
	372
	373	config BUILDDIR
	374	string "Build Directory"
	375	default "/mnt/build_dir"
	376	help
	377	#-- The directory where the created system will be located.
	378	# NOTE: A working directory named jhalfs will be created
	379	# here, so ensure this does not conflict with the jhalfs
	380	# source directory.
	381
	382	config GETPKG
	383	bool "Retrieve source files"
	384	default n
	385	help
	386	#-- Download all packages and patches required by the selected book
	387	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	388	# first and if necessary retrieves them from the 'net.
	389	# Files will be transferred to $BUILDDIR/sources.
	390
	391	config SRC_ARCHIVE
	392	string "Package Archive Directory"
	393	default "$SRC_ARCHIVE"
[f596dde]	394	depends on GETPKG
[e5d44f5]	395	help
	396	#-- A local archive for packages/files (not $BUILDDIR/sources)
	397	# Any missing file will be downloaded and archived here,
	398	# if the user has the right privileges.
	399
	400	config RETRYSRCDOWNLOAD
	401	bool "Retry on 'connection refused' failure"
	402	default n
[f596dde]	403	depends on GETPKG
[e5d44f5]	404	help
	405	#-- Attempt to download a source package again if it fails
	406	# with a 'connection refused' error. This can happen on
	407	# servers that are overloaded.
	408
	409	config RETRYDOWNLOADCNT
	410	int "Number of retry attempts on download failures"
	411	default 20
[f596dde]	412	depends on GETPKG
[e5d44f5]	413	help
	414	#-- Number of times to retry a failed download.
	415
	416	config DOWNLOADTIMEOUT
	417	int "Download timeout (in seconds)"
	418	default 30
[f596dde]	419	depends on GETPKG
[e5d44f5]	420	help
	421	#-- Number of seconds to wait for a download to start before
	422	# timing out.
	423
	424	config SERVER
	425	string "FTP mirror"
	426	default "http://ftp.osuosl.org"
[f596dde]	427	depends on GETPKG
[e5d44f5]	428	help
	429	#-- FTP mirror to download packages and patches if not found
	430	# in $SRC_ARCHIVE
	431	# As a last resort, the files will downloaded from upstream,
	432	# if possible.
	433
	434	config RUNMAKE
	435	bool "Run the makefile"
	436	default n
	437	help
	438	#-- Automatically run the makefile once it has been created
	439
	440	config CLEAN
	441	bool "Rebuild files"
	442	default n
	443	help
	444	#-- Clean the build directory before performing any other task.
	445	# The directory is cleaned only if it was populated by a
	446	# previous JHALFS run.
[a705708]	447
	448	#--- End General Settings
	449	endmenu
	450
[e5d44f5]	451	menu "Build Settings"
[e3ccc27]	452	depends on !BOOK_BLFS
[e5d44f5]	453
	454	#--- Test Suites
	455	config CONFIG_TESTS
	456	bool "Run testsuites"
	457	default y
	458	help
	459	#-- Run test suites
[1d5f3e3]	460	# If you select 'y' here:
[e5d44f5]	461	# You will have to select between:
[945ccaa]	462	# - Only critical final system testsuites
[e5d44f5]	463	# - All final system testsuites
	464	#
[1d5f3e3]	465	# Note that in any case, all the test instructions will
	466	# be generated. Those which are not wanted will be commented
	467	# out. If you select 'n' here, the commented test instructions
	468	# do not stop on test suite failures.
[e5d44f5]	469
[945ccaa]	470	menu "Test settings"
[f596dde]	471	depends on CONFIG_TESTS
[e5d44f5]	472	choice
	473	prompt "Tests level"
	474	default TST_1
	475
	476	config TST_1
[945ccaa]	477	bool "Only final system critical testsuites"
	478	help
	479	#-- Critical tests:
	480	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	481	# testsuites for final system. The others are commented
	482	# out.
[e5d44f5]	483
	484	config TST_2
	485	bool "All final system testsuites"
[1d5f3e3]	486	help
	487	#-- All final system test suites:
	488	# Test instructions for the temporary tools (if available)
	489	# are commented out.
[e5d44f5]	490
	491	endchoice
	492
[30a8961]	493	endmenu # test settings
	494
[945ccaa]	495	config TEST
	496	int
	497	default "0" if !CONFIG_TESTS
	498	default "1" if TST_1
	499	default "2" if TST_2
[d54e3c9]	500	#--- End Test Suites
[e5d44f5]	501
	502	#--- Package Management
	503	config PKGMNGT
	504	bool "Package management"
[f596dde]	505	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	506	default n
	507	help
	508	#-- Use package management
	509	#
[945ccaa]	510	# If set, you'll have to choose between
	511	# two package management styles:
	512	# - Build and install:
	513	# the packages in the final phase are built
	514	# in a separate directory, PKG_DEST.
	515	# You should provide a bash function for
[4b2a5fd]	516	# packaging and installing the package.
[945ccaa]	517	# - Preload a library before install:
	518	# Run the install instructions inside a
	519	# wrapper command, which monitors the
	520	# installed files.
	521	#
[e5d44f5]	522	# Also, you have to provide the instructions
	523	# to build the package manager during the
	524	# temporary tools phase, in the form of a
	525	# sect1 of the book identical to a package
	526	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	527	choice
[f596dde]	528	depends on PKGMNGT
[945ccaa]	529	prompt "Package management style"
	530	default PKG_PACK
	531
	532	config PKG_PACK
	533	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	534
[945ccaa]	535	config LIB_LOAD
	536	bool "Preload a library before installing (porg style)"
	537	endchoice
	538
	539	config WRAP_INSTALL
	540	bool
	541	default y if LIB_LOAD
	542	default n if PKG_PACK
[e5d44f5]	543	#--- End package management
	544
	545	#--- Installed files logs
	546	config INSTALL_LOG
	547	bool "Create a log of installed files for each package"
	548	default n
	549	help
	550	#-- Select this if you want to create logs of the files
	551	# installed by each package on the final system.
	552
	553	#--- End Installed files logs
	554
[945ccaa]	555	config STRIP
	556	bool "Strip Installed Binaries/Libraries"
	557	default n
	558
[dc7fd7b]	559	config DEL_LA_FILES
[d2a7ec8]	560	bool "Remove libtool .la files"
[dc7fd7b]	561	default y
	562	help
	563	#-- Remove files libxxx.la installed by libtool. For a rationale
	564	# see https://blog.flameeyes.eu/tags/lafiles/
	565
[945ccaa]	566	config NO_PROGRESS_BAR
[f596dde]	567	bool "DO NOT use/display progress_bar"
[945ccaa]	568	default n
	569	help
	570	#-- Do not use the progress bar routine. On slower machines
	571	# this function consumes precious CPU cycles.
	572
	573	#--- End Build Settings
	574	endmenu
	575
[6990d80]	576	menu "System configuration"
[e3ccc27]	577	depends on !BOOK_BLFS
[945ccaa]	578
[e5d44f5]	579	#--- FSTAB
	580	config HAVE_FSTAB
	581	bool "Use a custom fstab file"
	582	default n
	583	help
	584	#-- Select this if you have an fstab file with entries
[945ccaa]	585	# for the target system
[a705708]	586
[e5d44f5]	587	config FSTAB
	588	string "Fstab file (optional)"
	589	default "*EDIT ME*"
	590	depends on HAVE_FSTAB
	591	help
	592	#-- The location of fstab file (if empty, a template is created)
	593	#--- End FSTAB
	594
	595	#--- Kernel
	596	config CONFIG_BUILD_KERNEL
	597	bool "Build the kernel"
	598	default n
	599	help
	600	#-- Select this option if you wish to build the kernel.
	601	#
	602	# You will be prompted for the full path to the .config
	603	# file. It will be copied to the 'sources' directory and
	604	# renamed kernel-config
	605
	606	config CONFIG
	607	string "Kernel config file"
	608	default "*EDIT ME*"
	609	depends on CONFIG_BUILD_KERNEL
	610	help
	611	#-- Fully qualified path to a kernel config file
	612	# The config file will be copied to ${BUILD_DIR}/sources
	613	# and renamed 'kernel-config'
	614	#--- End Kernel
	615
[085435e]	616	config NCURSES5
	617	bool "Install non-wide-character ncurses"
[e5d44f5]	618	default n
[085435e]	619	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	620	help
[085435e]	621	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	622
	623	config TIMEZONE
	624	string "TimeZone"
	625	default "GMT"
	626	help
	627	#-- The timezone as output by tzselect
	628	# This will be copied to /etc/localtime
	629
	630	config LANG
	631	string "Language"
	632	default "$LANG"
	633	help
	634	#-- LANG variable set in /etc/profile
	635	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	636	# for values (or the file localedata/SUPPORTED in glibc tarball)
	637
	638	config FULL_LOCALE
	639	bool "Install the full set of locales"
	640	default n
	641	help
	642	#-- If set to y, the full set of supported locales
	643	# will be installed. Otherwise, only the minimal set
	644	# necessary for the tests will be installed,
	645	# together with the locale associated with the
	646	# LANG you have chosen, if not in the minimal set.
	647
	648	#--- Groff page
	649	choice
	650	prompt "Groff page size"
	651	default PAGE_LETTER
	652	help
	653	#-- Page definition for groff: letter or A4
	654
	655	config PAGE_LETTER
	656	bool "letter"
	657
	658	config PAGE_A4
	659	bool "A4"
	660	endchoice
	661
	662	config PAGE
	663	string
	664	default "letter" if PAGE_LETTER
	665	default "A4" if PAGE_A4
	666	#--- End Groff page
[a705708]	667
[945ccaa]	668	config HOSTNAME
[6990d80]	669	string "Hostname (see help)"
[945ccaa]	670	default "EDITME"
[6990d80]	671	help
	672	If you are on a public network, use the hostname given to you by
	673	your institution, or corporation, etc. If your network is private,
	674	that is, behind a firewall such as a box to connect to your ISP,
	675	you can choose anything you'd like. Combined with the domain name
	676	"local", you have the possibility to access your computer by name
	677	instead of address on the private network (see RFC 6762 and
	678	https://www.howtogeek.com/167190/).
[945ccaa]	679
	680	menu "Network configuration"
	681	config INTERFACE
	682	string "netword card name"
	683	default "eth0"
[6990d80]	684	help
[48700c3]	685	eth0 is used in most cases. Virtual interfaces may get other
[6990d80]	686	names (for example enp0s3 for the default network stack in qemu).
	687	Systemd may also rename network interfaces according to their
	688	bus addresses.
[945ccaa]	689	config IP_ADDR
	690	string "Static IP address"
	691	default "10.0.2.9"
[6990d80]	692	help
	693	The default here is for a virtual interface in qemu. Private
[f45af2c]	694	networks have addresses in the range 10.x.x.x or 192.168.x.x.
[6990d80]	695	You have to know your network prefix. Then the last figure
	696	may be anything you like.
	697
[945ccaa]	698	config GATEWAY
	699	string "Gateway"
	700	default "10.0.2.2"
[6990d80]	701	help
	702	Again, this default is for a qemu network stack. Usually, the
	703	gateway is the address of your firewall.
[945ccaa]	704	config PREFIX
	705	string "Subnet prefix"
	706	default "24"
[6990d80]	707	help
	708	Again, this default is for a qemu network stack, but is also
	709	the most used in private networks.
[945ccaa]	710	config BROADCAST
	711	string "Broadcast address"
	712	default "10.0.2.255"
	713	config DOMAIN
[6990d80]	714	string "Domain name (see help)"
	715	default "local"
	716	help
	717	Domain Name:
	718	Doamin names are registered, so if your computer is on a public
	719	network, you cannot use any name you'd like. On a public
	720	network, you should have been given a domain name by
	721	your corporation, institution, etc.
	722	If your network is really private, that is behind a firewall
	723	such as a box for connecting to an ISP, you can choose any
	724	domain you'd like. You can also opt for "local", see RFC 6762,
	725	or "something.test", see RFC 6761.
[945ccaa]	726	config DNS1
	727	string "Primary Name server"
	728	default "10.0.2.3"
	729	config DNS2
	730	string "Secondary Name server"
	731	default "8.8.8.8"
	732	endmenu # Network configuration
	733
	734	menu "Console configuration"
	735	config FONT
	736	string "Console font"
	737	default "lat0-16"
[3b43e17b]	738	help
	739	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	740	etc, must be done manually.
[945ccaa]	741	config KEYMAP
	742	string "Keymap name"
	743	default "us"
[3b43e17b]	744	config LOCAL
	745	boolean "Hardware clock is set to local time"
	746	default n
	747	help
	748	If the harware clock is set to local time, answer yes,
	749	If it is set to UTC, answer no
	750	config LOG_LEVEL
	751	string "Default log level (1-8)"
	752	default "4"
[f596dde]	753	depends on BOOK_LFS
[3b43e17b]	754	help
	755	This can be changed using dmesg. 1 means "no message",
	756	8 shows every message sent by the kernel, which is very
	757	noisy. The default at boot time is 7, which is quite
	758	noisy too.
[945ccaa]	759	endmenu # Console configuration
	760
	761	endmenu #--- System configuration
[a705708]	762
[e5d44f5]	763	menu "Advanced Features"
[e3ccc27]	764	depends on !BOOK_BLFS
[e5d44f5]	765
	766	config REPORT
	767	bool "Create SBU and disk usage report"
	768	default y
	769
[f5ecc28]	770	config SAVE_CH5
	771	bool "Save Chapter 5 work"
	772	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	773	default n
	774	help
	775	Save the state of jhalfs at the end of chapter 5:
	776
	777	if you tick this item, the whole $LFS directory is
	778	saved when chapter 5 is finished. It'll be in an xz
	779	compressed tarball in the $LFS/jhalfs directory
	780
[f596dde]	781	#--- ICA
[e5d44f5]	782	config COMPARE
	783	bool "Run comparison analysis on final stage"
	784	default n
	785	help
	786	#-- Should an iterative comparison analysis be performed?
	787	#
[f596dde]	788	# Unless you are familiar with ICA, do not
[e5d44f5]	789	# select this option
	790	#
[f596dde]	791	# ICA is an analysis tool for comparing one
[e5d44f5]	792	# build to the next. Builds mays differ from one iteration
[f596dde]	793	# to another due to the build order and this tool try
[e5d44f5]	794	# to ferret out those differences by examining the stored
	795	# build logs and binary files.
	796	#
	797	# The scripts are well commented and can be found in ./extras/*
	798	#
	799
	800	config ITERATIONS
	801	int "Number of test runs (2,3,4,5)" if COMPARE
	802	depends on COMPARE
	803	range 2 5
	804	default 3
	805
	806	config RUN_ICA
[f596dde]	807	bool
	808	default y if COMPARE
[e5d44f5]	809
[f596dde]	810	#--- End ICA
[e5d44f5]	811
	812	#--- Optimizations
	813	config CONFIG_OPTIMIZE
	814	bool "Optimization and parallelization"
	815	default n
	816	help
	817	# Opens a menu for various optimization settings:
	818	# Actual optimization flags MUST be defined in ./optimize/*
	819	# before activating this option.
	820	#
	821	# WARNING: The use of build optimizations may lead to build issues.
	822	# If the system doesn't work as expected, please rebuild
	823	# without optimizations before asking for support.
	824	menu "Optimization settings"
	825	depends on CONFIG_OPTIMIZE
	826
	827	config N_PARALLEL
	828	int "Number of parallel `make' jobs"
	829	default 1
	830	help
	831	#-- The usual recommandation is (number of CPU cores)+1
	832	# Do not set for meaningful SBU calculations.
	833
	834	choice
[f596dde]	835	prompt "Optimization level"
[e5d44f5]	836	default OPT_1
	837	help
	838	#-- Optimization values are set in optimize/* files
	839
	840	config OPT_1
	841	bool "Final system only"
	842
	843	config OPT_2
	844	bool "Both temp tools and final system"
	845
	846	endchoice
[84a3fda]	847
	848	config REALSBU
	849	bool "Build Binutls pass1 without optimization (Real SBU)"
[f45af2c]	850	depends on OPT_2
[84a3fda]	851	default n
	852	help
	853	#-- Use -j1 in make invokation for Binutils pass1 to
	854	# get a valid SBU value.
	855
[9d665db]	856	endmenu # Optimization settings
[e5d44f5]	857	config OPTIMIZE
	858	int
	859	default "0" if !CONFIG_OPTIMIZE
	860	default "1" if OPT_1
	861	default "2" if OPT_2
[84a3fda]	862
[e5d44f5]	863	#--- End Optimizations
[a705708]	864
[e5d44f5]	865	#-- Internal Settings
	866	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	867
[e5d44f5]	868	config SCRIPT_ROOT
	869	string "Scripts root"
	870	default "jhalfs"
[4da2512]	871
[e5d44f5]	872	config JHALFSDIR
	873	string "jhalfs directory"
	874	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	875
[e5d44f5]	876	config LOGDIRBASE
	877	string "Build logs directory basename"
	878	default "logs"
[93346ee]	879
[e5d44f5]	880	config LOGDIR
	881	string "Build logs directory"
	882	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	883
[e5d44f5]	884	config TESTLOGDIRBASE
	885	string "Test suites logs directory basename"
	886	default "test-logs"
[4da2512]	887
[e5d44f5]	888	config TESTLOGDIR
	889	string "Test suites logs directory"
	890	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	891
[e5d44f5]	892	config FILELOGDIRBASE
	893	string "Installed files logs directory basename"
	894	default "installed-files"
[93346ee]	895
[e5d44f5]	896	config FILELOGDIR
	897	string "Installed files logs directory"
	898	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	899
[e5d44f5]	900	config ICALOGDIR
	901	string "ICA logs directory"
	902	default "$LOGDIR/ICA"
[4da2512]	903
[e5d44f5]	904	config MKFILE
	905	string "Makefile"
	906	default "$JHALFSDIR/Makefile"
[4da2512]	907
[e5d44f5]	908	config XSL
	909	string "XSL stylesheet"
[8825e69]	910	default "lfs.xsl"
[4da2512]	911
[e5d44f5]	912	config PKG_LST
	913	string "Package contents list"
	914	default "unpacked"
[4da2512]	915
[e5d44f5]	916	#--- End Internal Settings
	917	endmenu
[4da2512]	918
[a705708]	919	#--- End Advanced Features
	920	endmenu
[7b6ecc5]	921
[a16f769]	922	config REBUILD_MAKEFILE
[06eddf4]	923	# depends on !BOOK_BLFS
[e5d44f5]	924	bool "Rebuild the Makefile (see help)"
	925	default n
	926	help
	927	#-- Rebuild the Makefile
	928	#
	929	# This option allows to rebuild the Makefile after
	930	# customizing the base system build scripts.
	931	#
	932	# See README.CUSTOM for more info about this feature.
[06eddf4]	933	# Note that you should do that after configuring a jhalfs
	934	# build, and only if you need changing the build scripts order
	935	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 875366f

Download in other formats: