Context Navigation

source: Config.in@ 9d665db

ablfs-more trunk

Last change on this file since 9d665db was 9d665db, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Remove legacy: remove tests in temporary tools

There is no way to run them now since we are in a cross build
configuration

Property mode set to 100644

File size: 30.5 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config PROGNAME
	49	string
	50	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	51
	52	config RUN_ME
	53	string
[e3f41e33]	54	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	55	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	56	#--- End BOOK/script
	57
	58	#--- Book version
	59	choice
	60	prompt "Release"
[1e686d1]	61	default relGIT
[e5d44f5]	62
	63	config relGIT
	64	bool "GIT"
	65	help
[1e686d1]	66	Current development git trunk branch
[e5d44f5]	67
	68	config WORKING_COPY
	69	bool "Working Copy"
	70	help
	71	A local working copy
	72
	73	config BRANCH
[e3f41e33]	74	bool "Branch or stable book"
[e5d44f5]	75	help
[1e686d1]	76	A supported GIT branch or tag
[e5d44f5]	77	endchoice
	78
	79	config BRANCH_ID
	80	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	81	default "EDIT ME"
[f596dde]	82	depends on BRANCH
[e5d44f5]	83	help
	84	A list of valid branches and stable book IDs is available at
	85	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	86
	87	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	88	YYY version.
	89
	90	config BOOK
	91	string "Loc of working copy (mandatory)"
	92	default "EDIT ME"
[f596dde]	93	depends on WORKING_COPY
[e5d44f5]	94	help
	95	The full path to a local copy of the book XML sources
	96
[13e52a5]	97	choice
	98	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && (BRANCH \|\| WORKING_COPY)
	99	prompt "Mutilib"
	100	default LFS_MULTILIB_NO
	101	config LFS_MULTILIB_NO
	102	bool "Standard LFS on i686 or amd64"
	103	help
[b6e981a]	104	Use standard LFS book (choose this if not multilib source)
[13e52a5]	105
	106	config LFS_MULTILIB_I686
	107	bool "Multilib LFS on amd64 with i686 libraries"
	108	help
	109	Use Multilib LFS book with i686 libraries
	110
	111	config LFS_MULTILIB_X32
	112	bool "Multilib LFS on amd64 with x32 libraries"
	113	help
	114	Use Multilib LFS book with x32 libraries
	115
	116	config LFS_MULTILIB_ALL
	117	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	118	help
	119	Use Multilib LFS book with i686 and x32 libraries
	120
	121	endchoice
	122
	123	config MULTILIB
	124	string
	125	default "default" if LFS_MULTILIB_NO
	126	default "ml_32" if LFS_MULTILIB_I686
	127	default "ml_x32" if LFS_MULTILIB_X32
	128	default "ml_all" if LFS_MULTILIB_ALL
	129
[e5d44f5]	130	#--- End BOOK version
	131
	132	choice
	133	prompt "Build method"
[e3f41e33]	134	default BUILD_CHROOT
[e5d44f5]	135	help
	136	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	137	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	138	a full explanation.
	139
	140	config BUILD_CHROOT
	141	bool "chroot"
	142
	143	config BUILD_BOOT
	144	bool "boot"
	145	endchoice
	146
	147	config METHOD
	148	string
	149	default "chroot" if BUILD_CHROOT
	150	default "boot" if BUILD_BOOT
	151
	152	config BOOT_CONFIG
	153	string "BOOT kernel config file (mandatory)"
	154	default "*EDIT ME*"
	155	depends on BUILD_BOOT
	156	help
	157	If METHOD=boot, location of boot-kernel config file
	158	The config file will be copied to ${BUILD_DIR}/sources
	159	and renamed 'bootkernel-config'
	160	NOTE: this setting is required
	161
	162	#--- blfs-tool Support
	163	config BLFS_TOOL
	164	bool "Add blfs-tool support"
	165	default n
[e3f41e33]	166	depends on !BOOK_BLFS
[e5d44f5]	167	help
	168	Activating this option will install additional packages needed
	169	to use blfs tools after booting the new system.
	170	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	171	(see below).
	172	After booting the new xLFS system, but before using the blfs tools,
	173	you should create a user account, move the /blfs_root directory
	174	to that user's home, and change its ownership to that of the user.
	175	Also, be sure to give the user read and write access on the
	176	$TRACKING_DIR directory and the files that it contains.
	177	Don't forget to configure sudo properly on the new system.
	178
	179	config DUMMY # Avoid indenting the items below
	180	bool
	181
	182	if BLFS_TOOL
	183	menu "blfs-tool dependencies"
	184
	185	config DEP_LIBXML
	186	bool "libxml2 (required)"
	187	default y
	188
	189	config DEP_LIBXSLT
	190	bool "libxslt (required)"
	191	default y
	192
	193	config DEP_DBXML
	194	bool "DocBook XML DTD (required)"
	195	default y
	196
	197	config DEP_LYNX
	198	bool "lynx (optional, for reading the generated book)"
	199	default y
	200
	201	config DEP_WGET
	202	bool "wget (recommended)"
	203	default y
	204
	205	config DEP_GPM
	206	bool "GPM (optional, see help)"
	207	default n
	208	help
	209	if you install gpm, it will be started
[90f5b6d]	210	automatically on boot. It allows copy-paste
	211	while Xorg is not installed.
[e5d44f5]	212
[1e686d1]	213	config DEP_GIT
	214	bool "GIT client (optional, see help)"
[e5d44f5]	215	default n
	216	help
[1e686d1]	217	Git is needed for updating the book
[90f5b6d]	218	sources. You do not need it if building a
	219	stable book.
[e5d44f5]	220
	221	endmenu
	222
	223	choice
	224	prompt "BLFS Release"
[1e686d1]	225	default BLFS_GIT
[e5d44f5]	226
[1e686d1]	227	config BLFS_GIT
	228	bool "BLFS GIT"
[e5d44f5]	229	help
	230	Current development version as in trunk
	231
	232	config BLFS_WORKING_COPY
	233	bool "BLFS working copy"
	234	help
	235	A local working copy of the BLFS book.
	236
	237	config BLFS_BRANCH
	238	bool "BLFS Branch or stable book"
	239	help
[1e686d1]	240	A supported GIT branch or stable (tag) book release
[e5d44f5]	241	endchoice
	242
	243	config BLFS_WC_LOCATION
	244	string "Location of the local BLFS working copy (mandatory)"
	245	default "EDIT ME"
	246	depends on BLFS_WORKING_COPY
	247	help
[506120ee]	248	Full path to the BLFS book working copy
[e5d44f5]	249
	250	config BLFS_BRANCH_ID
	251	string "BLFS Book Version (mandatory)"
	252	default "EDIT ME"
	253	depends on BLFS_BRANCH
	254	help
	255	A list of valid branches and stable book IDs is available at
	256	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	257	endif
	258	#--- End blfs-tool Support
	259
	260	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	261	# or directly)
	262	config BLFS_ROOT
	263	string "Root of the tools directory (see help)"
	264	default "/blfs_root"
	265	depends on BLFS_TOOL \|\| BOOK_BLFS
	266	help
	267	Path to the directory where all required files and scripts
	268	will be stored.
	269
	270	This path must begin with a slash, and:
	271	- is relative to the user's HOME directory when installing the
	272	blfs tools on an already existing LFS system.
	273	- is relative to the root of the build directory (`/' in chroot)
	274	when adding the tools after a jhalfs run
	275
	276	CAUTION: this directory will be removed if it already exists.
	277
	278	config BLFS_XML
	279	string "BLFS sources directory (internal parameter)"
	280	default "blfs-xml"
[f596dde]	281	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	282	help
	283	The directory name under $BLFS_ROOT where the BLFS
	284	book sources will be copied or checked out. Do not change that
	285	unless you know what you are doing...
[506120ee]	286
[f733772]	287	config LFS_XML
	288	string "LFS sources directory (internal parameter)"
	289	default "lfs-xml"
[f596dde]	290	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	291	help
	292	The directory name under $BLFS_ROOT where the LFS
	293	book sources will be copied or checked out. Do not change that
	294	unless you know what you are doing...
	295
[506120ee]	296	choice
	297	prompt "LFS Release"
[1e686d1]	298	default LFS_relGIT
[f596dde]	299	depends on BOOK_BLFS
[506120ee]	300
[1e686d1]	301	config LFS_relGIT
	302	bool "LFS GIT"
[506120ee]	303	help
	304	Current development version as in trunk
	305
	306	config LFS_WORKING_COPY
	307	bool "LFS working copy"
	308	help
	309	A local working copy of the LFS book.
	310
	311	config LFS_BRANCH
	312	bool "LFS Branch or stable book"
	313	help
[1e686d1]	314	A supported GIT branch or stable (tag) book release
[506120ee]	315	endchoice
	316
	317	config BLFS_LFS_BOOK
	318	string "Location of the local LFS working copy (mandatory)"
	319	default "EDIT ME"
	320	depends on LFS_WORKING_COPY
	321	help
	322	Full path to the LFS book working copy"
	323
	324	config BLFS_LFS_BRANCH_ID
	325	string "LFS Book Version (mandatory)"
	326	default "EDIT ME"
	327	depends on LFS_BRANCH
	328	help
	329	A list of valid branches and stable book IDs is available at
	330	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	331	# End of BLFS parameters
	332
	333	#--- Custom Tools support
	334	config CUSTOM_TOOLS
[f596dde]	335	depends on !BOOK_BLFS
[e5d44f5]	336	bool "Add custom tools support"
	337	default n
	338	help
	339	Activating this option additional packages you create
	340	will be installed after finished the xLFS system build.
	341	#--- End Custom Tools support
	342
[e3ccc27]	343	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	344	# As well.
	345	config TRACKING_DIR
	346	string "Installed packages database directory"
	347	default "/var/lib/jhalfs/BLFS"
	348	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	349	help
	350	Full path to the directory where the database of
	351	installed packages will be created.
	352
	353	If the blfs tools are installed on a running xLFS system,
	354	the user must have enough privileges to create this directory.
	355	It may be necessary to create the /var/lib/jhalfs directory as
	356	root, and make it writable by the user before running this tool.
	357
	358	If you are installing the blfs tools as part of an xLFS build
	359	and/or using the customized scripts feature, you will
	360	need to fix this directory's permissions after booting
	361	the new system.
	362
	363	Note that the user that will build the packages must
	364	have read and write access to this directory.
[53f291f]	365
[a705708]	366	#--- End BOOK Settings
	367	endmenu
	368
[e5d44f5]	369	menu "General Settings"
[e3ccc27]	370	depends on !BOOK_BLFS
[e5d44f5]	371
[b7583ec]	372	#--- {C,H,}LFS User Account
	373
	374	config LUSER
[e5d44f5]	375	string
	376	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	377
	378	config LGROUP
	379	string
[b7583ec]	380	default LUSER
[e5d44f5]	381
	382	config LHOME
	383	string
[b7583ec]	384	default "/home"
	385
[e5d44f5]	386	#--- End Set User Account
	387
	388	config BUILDDIR
	389	string "Build Directory"
	390	default "/mnt/build_dir"
	391	help
	392	#-- The directory where the created system will be located.
	393	# NOTE: A working directory named jhalfs will be created
	394	# here, so ensure this does not conflict with the jhalfs
	395	# source directory.
	396
	397	config GETPKG
	398	bool "Retrieve source files"
	399	default n
	400	help
	401	#-- Download all packages and patches required by the selected book
	402	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	403	# first and if necessary retrieves them from the 'net.
	404	# Files will be transferred to $BUILDDIR/sources.
	405
	406	config SRC_ARCHIVE
	407	string "Package Archive Directory"
	408	default "$SRC_ARCHIVE"
[f596dde]	409	depends on GETPKG
[e5d44f5]	410	help
	411	#-- A local archive for packages/files (not $BUILDDIR/sources)
	412	# Any missing file will be downloaded and archived here,
	413	# if the user has the right privileges.
	414
	415	config RETRYSRCDOWNLOAD
	416	bool "Retry on 'connection refused' failure"
	417	default n
[f596dde]	418	depends on GETPKG
[e5d44f5]	419	help
	420	#-- Attempt to download a source package again if it fails
	421	# with a 'connection refused' error. This can happen on
	422	# servers that are overloaded.
	423
	424	config RETRYDOWNLOADCNT
	425	int "Number of retry attempts on download failures"
	426	default 20
[f596dde]	427	depends on GETPKG
[e5d44f5]	428	help
	429	#-- Number of times to retry a failed download.
	430
	431	config DOWNLOADTIMEOUT
	432	int "Download timeout (in seconds)"
	433	default 30
[f596dde]	434	depends on GETPKG
[e5d44f5]	435	help
	436	#-- Number of seconds to wait for a download to start before
	437	# timing out.
	438
	439	config SERVER
	440	string "FTP mirror"
	441	default "http://ftp.osuosl.org"
[f596dde]	442	depends on GETPKG
[e5d44f5]	443	help
	444	#-- FTP mirror to download packages and patches if not found
	445	# in $SRC_ARCHIVE
	446	# As a last resort, the files will downloaded from upstream,
	447	# if possible.
	448
	449	config RUNMAKE
	450	bool "Run the makefile"
	451	default n
	452	help
	453	#-- Automatically run the makefile once it has been created
	454
	455	config CLEAN
	456	bool "Rebuild files"
	457	default n
	458	help
	459	#-- Clean the build directory before performing any other task.
	460	# The directory is cleaned only if it was populated by a
	461	# previous JHALFS run.
[a705708]	462
	463	#--- End General Settings
	464	endmenu
	465
[e5d44f5]	466	menu "Build Settings"
[e3ccc27]	467	depends on !BOOK_BLFS
[e5d44f5]	468
	469	#--- Test Suites
	470	config CONFIG_TESTS
	471	bool "Run testsuites"
	472	default y
	473	help
	474	#-- Run test suites
[1d5f3e3]	475	# If you select 'y' here:
[e5d44f5]	476	# You will have to select between:
[945ccaa]	477	# - Only critical final system testsuites
[e5d44f5]	478	# - All final system testsuites
	479	# You will be prompted also about the "flavour" of the
	480	# testsuites run:
	481	# - Don't stop on test suite failures
	482	# - Abort the build at the first test suite failure
	483	#
[1d5f3e3]	484	# Note that in any case, all the test instructions will
	485	# be generated. Those which are not wanted will be commented
	486	# out. If you select 'n' here, the commented test instructions
	487	# do not stop on test suite failures.
[e5d44f5]	488
[945ccaa]	489	menu "Test settings"
[f596dde]	490	depends on CONFIG_TESTS
[e5d44f5]	491	choice
	492	prompt "Tests level"
	493	default TST_1
	494
	495	config TST_1
[945ccaa]	496	bool "Only final system critical testsuites"
	497	help
	498	#-- Critical tests:
	499	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	500	# testsuites for final system. The others are commented
	501	# out.
[e5d44f5]	502
	503	config TST_2
	504	bool "All final system testsuites"
[1d5f3e3]	505	help
	506	#-- All final system test suites:
	507	# Test instructions for the temporary tools (if available)
	508	# are commented out.
[e5d44f5]	509
	510	endchoice
	511
	512	choice
	513	prompt "Flavour"
	514
	515	config NO_BOMB
[945ccaa]	516	bool "Don't stop on test failures"
[e5d44f5]	517
	518	config BOMB
[945ccaa]	519	bool "Abort the build on the first test failure"
[e5d44f5]	520	endchoice
	521
[30a8961]	522	endmenu # test settings
	523
[945ccaa]	524	config TEST
	525	int
	526	default "0" if !CONFIG_TESTS
	527	default "1" if TST_1
	528	default "2" if TST_2
	529
[e5d44f5]	530	config BOMB_TEST
	531	bool
	532	default n if NO_BOMB
	533	default y if BOMB
[30a8961]	534	#--- End Test Suites
[e5d44f5]	535
	536	#--- Package Management
	537	config PKGMNGT
	538	bool "Package management"
[f596dde]	539	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	540	default n
	541	help
	542	#-- Use package management
	543	#
[945ccaa]	544	# If set, you'll have to choose between
	545	# two package management styles:
	546	# - Build and install:
	547	# the packages in the final phase are built
	548	# in a separate directory, PKG_DEST.
	549	# You should provide a bash function for
[4b2a5fd]	550	# packaging and installing the package.
[945ccaa]	551	# - Preload a library before install:
	552	# Run the install instructions inside a
	553	# wrapper command, which monitors the
	554	# installed files.
	555	#
[e5d44f5]	556	# Also, you have to provide the instructions
	557	# to build the package manager during the
	558	# temporary tools phase, in the form of a
	559	# sect1 of the book identical to a package
	560	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	561	choice
[f596dde]	562	depends on PKGMNGT
[945ccaa]	563	prompt "Package management style"
	564	default PKG_PACK
	565
	566	config PKG_PACK
	567	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	568
[945ccaa]	569	config LIB_LOAD
	570	bool "Preload a library before installing (porg style)"
	571	endchoice
	572
	573	config WRAP_INSTALL
	574	bool
	575	default y if LIB_LOAD
	576	default n if PKG_PACK
[e5d44f5]	577	#--- End package management
	578
	579	#--- Installed files logs
	580	config INSTALL_LOG
	581	bool "Create a log of installed files for each package"
	582	default n
	583	help
	584	#-- Select this if you want to create logs of the files
	585	# installed by each package on the final system.
	586
	587	#--- End Installed files logs
	588
[945ccaa]	589	config STRIP
	590	bool "Strip Installed Binaries/Libraries"
	591	default n
	592
[dc7fd7b]	593	config DEL_LA_FILES
[d2a7ec8]	594	bool "Remove libtool .la files"
[dc7fd7b]	595	default y
	596	help
	597	#-- Remove files libxxx.la installed by libtool. For a rationale
	598	# see https://blog.flameeyes.eu/tags/lafiles/
	599
[945ccaa]	600	config NO_PROGRESS_BAR
[f596dde]	601	bool "DO NOT use/display progress_bar"
[945ccaa]	602	default n
	603	help
	604	#-- Do not use the progress bar routine. On slower machines
	605	# this function consumes precious CPU cycles.
	606
	607	#--- End Build Settings
	608	endmenu
	609
[6990d80]	610	menu "System configuration"
[e3ccc27]	611	depends on !BOOK_BLFS
[945ccaa]	612
[e5d44f5]	613	#--- FSTAB
	614	config HAVE_FSTAB
	615	bool "Use a custom fstab file"
	616	default n
	617	help
	618	#-- Select this if you have an fstab file with entries
[945ccaa]	619	# for the target system
[a705708]	620
[e5d44f5]	621	config FSTAB
	622	string "Fstab file (optional)"
	623	default "*EDIT ME*"
	624	depends on HAVE_FSTAB
	625	help
	626	#-- The location of fstab file (if empty, a template is created)
	627	#--- End FSTAB
	628
	629	#--- Kernel
	630	config CONFIG_BUILD_KERNEL
	631	bool "Build the kernel"
	632	default n
	633	help
	634	#-- Select this option if you wish to build the kernel.
	635	#
	636	# You will be prompted for the full path to the .config
	637	# file. It will be copied to the 'sources' directory and
	638	# renamed kernel-config
	639
	640	config CONFIG
	641	string "Kernel config file"
	642	default "*EDIT ME*"
	643	depends on CONFIG_BUILD_KERNEL
	644	help
	645	#-- Fully qualified path to a kernel config file
	646	# The config file will be copied to ${BUILD_DIR}/sources
	647	# and renamed 'kernel-config'
	648	#--- End Kernel
	649
[085435e]	650	config NCURSES5
	651	bool "Install non-wide-character ncurses"
[e5d44f5]	652	default n
[085435e]	653	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	654	help
[085435e]	655	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	656
	657	config TIMEZONE
	658	string "TimeZone"
	659	default "GMT"
	660	help
	661	#-- The timezone as output by tzselect
	662	# This will be copied to /etc/localtime
	663
	664	config LANG
	665	string "Language"
	666	default "$LANG"
	667	help
	668	#-- LANG variable set in /etc/profile
	669	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	670	# for values (or the file localedata/SUPPORTED in glibc tarball)
	671
	672	config FULL_LOCALE
	673	bool "Install the full set of locales"
	674	default n
	675	help
	676	#-- If set to y, the full set of supported locales
	677	# will be installed. Otherwise, only the minimal set
	678	# necessary for the tests will be installed,
	679	# together with the locale associated with the
	680	# LANG you have chosen, if not in the minimal set.
	681
	682	#--- Groff page
	683	choice
	684	prompt "Groff page size"
	685	default PAGE_LETTER
	686	help
	687	#-- Page definition for groff: letter or A4
	688
	689	config PAGE_LETTER
	690	bool "letter"
	691
	692	config PAGE_A4
	693	bool "A4"
	694	endchoice
	695
	696	config PAGE
	697	string
	698	default "letter" if PAGE_LETTER
	699	default "A4" if PAGE_A4
	700	#--- End Groff page
[a705708]	701
[945ccaa]	702	config HOSTNAME
[6990d80]	703	string "Hostname (see help)"
[945ccaa]	704	default "EDITME"
[6990d80]	705	help
	706	If you are on a public network, use the hostname given to you by
	707	your institution, or corporation, etc. If your network is private,
	708	that is, behind a firewall such as a box to connect to your ISP,
	709	you can choose anything you'd like. Combined with the domain name
	710	"local", you have the possibility to access your computer by name
	711	instead of address on the private network (see RFC 6762 and
	712	https://www.howtogeek.com/167190/).
[945ccaa]	713
	714	menu "Network configuration"
	715	config INTERFACE
	716	string "netword card name"
	717	default "eth0"
[6990d80]	718	help
	719	eth0 is used in most cases. Virtual insterfaces may get other
	720	names (for example enp0s3 for the default network stack in qemu).
	721	Systemd may also rename network interfaces according to their
	722	bus addresses.
[945ccaa]	723	config IP_ADDR
	724	string "Static IP address"
	725	default "10.0.2.9"
[6990d80]	726	help
	727	The default here is for a virtual interface in qemu. Private
	728	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	729	You have to know your network prefix. Then the last figure
	730	may be anything you like.
	731
[945ccaa]	732	config GATEWAY
	733	string "Gateway"
	734	default "10.0.2.2"
[6990d80]	735	help
	736	Again, this default is for a qemu network stack. Usually, the
	737	gateway is the address of your firewall.
[945ccaa]	738	config PREFIX
	739	string "Subnet prefix"
	740	default "24"
[6990d80]	741	help
	742	Again, this default is for a qemu network stack, but is also
	743	the most used in private networks.
[945ccaa]	744	config BROADCAST
	745	string "Broadcast address"
	746	default "10.0.2.255"
	747	config DOMAIN
[6990d80]	748	string "Domain name (see help)"
	749	default "local"
	750	help
	751	Domain Name:
	752	Doamin names are registered, so if your computer is on a public
	753	network, you cannot use any name you'd like. On a public
	754	network, you should have been given a domain name by
	755	your corporation, institution, etc.
	756	If your network is really private, that is behind a firewall
	757	such as a box for connecting to an ISP, you can choose any
	758	domain you'd like. You can also opt for "local", see RFC 6762,
	759	or "something.test", see RFC 6761.
[945ccaa]	760	config DNS1
	761	string "Primary Name server"
	762	default "10.0.2.3"
	763	config DNS2
	764	string "Secondary Name server"
	765	default "8.8.8.8"
	766	endmenu # Network configuration
	767
	768	menu "Console configuration"
	769	config FONT
	770	string "Console font"
	771	default "lat0-16"
[3b43e17b]	772	help
	773	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	774	etc, must be done manually.
[945ccaa]	775	config KEYMAP
	776	string "Keymap name"
	777	default "us"
[3b43e17b]	778	config LOCAL
	779	boolean "Hardware clock is set to local time"
	780	default n
	781	help
	782	If the harware clock is set to local time, answer yes,
	783	If it is set to UTC, answer no
	784	config LOG_LEVEL
	785	string "Default log level (1-8)"
	786	default "4"
[f596dde]	787	depends on BOOK_LFS
[3b43e17b]	788	help
	789	This can be changed using dmesg. 1 means "no message",
	790	8 shows every message sent by the kernel, which is very
	791	noisy. The default at boot time is 7, which is quite
	792	noisy too.
[945ccaa]	793	endmenu # Console configuration
	794
	795	endmenu #--- System configuration
[a705708]	796
[e5d44f5]	797	menu "Advanced Features"
[e3ccc27]	798	depends on !BOOK_BLFS
[e5d44f5]	799
	800	config REPORT
	801	bool "Create SBU and disk usage report"
	802	default y
	803
[f5ecc28]	804	config SAVE_CH5
	805	bool "Save Chapter 5 work"
	806	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	807	default n
	808	help
	809	Save the state of jhalfs at the end of chapter 5:
	810
	811	if you tick this item, the whole $LFS directory is
	812	saved when chapter 5 is finished. It'll be in an xz
	813	compressed tarball in the $LFS/jhalfs directory
	814
[f596dde]	815	#--- ICA
[e5d44f5]	816	config COMPARE
	817	bool "Run comparison analysis on final stage"
	818	default n
	819	help
	820	#-- Should an iterative comparison analysis be performed?
	821	#
[f596dde]	822	# Unless you are familiar with ICA, do not
[e5d44f5]	823	# select this option
	824	#
[f596dde]	825	# ICA is an analysis tool for comparing one
[e5d44f5]	826	# build to the next. Builds mays differ from one iteration
[f596dde]	827	# to another due to the build order and this tool try
[e5d44f5]	828	# to ferret out those differences by examining the stored
	829	# build logs and binary files.
	830	#
	831	# The scripts are well commented and can be found in ./extras/*
	832	#
	833
	834	config ITERATIONS
	835	int "Number of test runs (2,3,4,5)" if COMPARE
	836	depends on COMPARE
	837	range 2 5
	838	default 3
	839
	840	config RUN_ICA
[f596dde]	841	bool
	842	default y if COMPARE
[e5d44f5]	843
[f596dde]	844	#--- End ICA
[e5d44f5]	845
	846	#--- Optimizations
	847	config CONFIG_OPTIMIZE
	848	bool "Optimization and parallelization"
	849	default n
	850	help
	851	# Opens a menu for various optimization settings:
	852	# Actual optimization flags MUST be defined in ./optimize/*
	853	# before activating this option.
	854	#
	855	# WARNING: The use of build optimizations may lead to build issues.
	856	# If the system doesn't work as expected, please rebuild
	857	# without optimizations before asking for support.
	858	menu "Optimization settings"
	859	depends on CONFIG_OPTIMIZE
	860
	861	config N_PARALLEL
	862	int "Number of parallel `make' jobs"
	863	default 1
	864	help
	865	#-- The usual recommandation is (number of CPU cores)+1
	866	# Do not set for meaningful SBU calculations.
	867
	868	choice
[f596dde]	869	prompt "Optimization level"
[e5d44f5]	870	default OPT_1
	871	help
	872	#-- Optimization values are set in optimize/* files
	873
	874	config OPT_1
	875	bool "Final system only"
	876
	877	config OPT_2
	878	bool "Both temp tools and final system"
	879
	880	endchoice
[84a3fda]	881
	882	config REALSBU
	883	bool "Build Binutls pass1 without optimization (Real SBU)"
	884	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	885	default n
	886	help
	887	#-- Use -j1 in make invokation for Binutils pass1 to
	888	# get a valid SBU value.
	889
[9d665db]	890	endmenu # Optimization settings
[e5d44f5]	891	config OPTIMIZE
	892	int
	893	default "0" if !CONFIG_OPTIMIZE
	894	default "1" if OPT_1
	895	default "2" if OPT_2
[84a3fda]	896
[e5d44f5]	897	#--- End Optimizations
[a705708]	898
[e5d44f5]	899	#-- Internal Settings
	900	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	901
[e5d44f5]	902	config SCRIPT_ROOT
	903	string "Scripts root"
	904	default "jhalfs"
[4da2512]	905
[e5d44f5]	906	config JHALFSDIR
	907	string "jhalfs directory"
	908	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	909
[e5d44f5]	910	config LOGDIRBASE
	911	string "Build logs directory basename"
	912	default "logs"
[93346ee]	913
[e5d44f5]	914	config LOGDIR
	915	string "Build logs directory"
	916	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	917
[e5d44f5]	918	config TESTLOGDIRBASE
	919	string "Test suites logs directory basename"
	920	default "test-logs"
[4da2512]	921
[e5d44f5]	922	config TESTLOGDIR
	923	string "Test suites logs directory"
	924	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	925
[e5d44f5]	926	config FILELOGDIRBASE
	927	string "Installed files logs directory basename"
	928	default "installed-files"
[93346ee]	929
[e5d44f5]	930	config FILELOGDIR
	931	string "Installed files logs directory"
	932	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	933
[e5d44f5]	934	config ICALOGDIR
	935	string "ICA logs directory"
	936	default "$LOGDIR/ICA"
[4da2512]	937
[e5d44f5]	938	config MKFILE
	939	string "Makefile"
	940	default "$JHALFSDIR/Makefile"
[4da2512]	941
[e5d44f5]	942	config XSL
	943	string "XSL stylesheet"
	944	default "$PROGNAME.xsl"
[4da2512]	945
[e5d44f5]	946	config PKG_LST
	947	string "Package contents list"
	948	default "unpacked"
[4da2512]	949
[e5d44f5]	950	#--- End Internal Settings
	951	endmenu
[4da2512]	952
[a705708]	953	#--- End Advanced Features
	954	endmenu
[7b6ecc5]	955
[a16f769]	956	config REBUILD_MAKEFILE
[06eddf4]	957	# depends on !BOOK_BLFS
[e5d44f5]	958	bool "Rebuild the Makefile (see help)"
	959	default n
	960	help
	961	#-- Rebuild the Makefile
	962	#
	963	# This option allows to rebuild the Makefile after
	964	# customizing the base system build scripts.
	965	#
	966	# See README.CUSTOM for more info about this feature.
[06eddf4]	967	# Note that you should do that after configuring a jhalfs
	968	# build, and only if you need changing the build scripts order
	969	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 9d665db

Download in other formats: