Context Navigation

source: Config.in@ a659e46

ablfs-more legacy trunk

Last change on this file since a659e46 was 3b43e17b, checked in by Pierre Labastie <pierre@…>, 6 years ago

Generate console files:

add variables LOCAL (y is hw clock set to local time) and LOG_LEVEL (sysv)
generate /etc/sysconfig/console (sysv) or /etc/vconsole.conf (systemd)
generate /etc/adjtime (only systemd)
remove UNICODE and FONTMAP variables (jhalfs makes unicode default)

Property mode set to 100644

File size: 40.8 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
	13	Set up the tools to build LFS with Sys V init.
	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_CLFS
	21	bool "Cross-Compiled Linux From Scratch"
	22	help
	23	Set up the tools to build CLFS.
	24
	25	config BOOK_CLFS2
	26	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
	27	help
	28	Set up the tools to build CLFS by the sysroot method.
	29
	30	config BOOK_CLFS3
	31	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
	32	help
	33	Set up the tools to build CLFS with tools for embedded systems.
	34
	35	config BOOK_BLFS
	36	bool "Beyond Linux From Scratch (see help)"
	37	help
	38	if the (C)LFS system has already been built, install the tools
	39	to build BLFS packages.
	40	endchoice
	41
[39dc04a]	42	choice
	43	depends BOOK_BLFS
	44	prompt "Init system"
	45
	46	config BLFS_SYSV
	47	bool "BLFS Sys V"
	48	help
	49	Extract the Sys V flavour of the BLFS book
	50
	51	config BLFS_SYSD
	52	bool "BLFS systemd"
	53	help
	54	Extract the systemd flavour of the BLFS book
	55
	56	endchoice
	57
[e5d44f5]	58	config INITSYS
	59	string
[39dc04a]	60	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	61	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	62
	63	config PROGNAME
	64	string
	65	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	66	default "clfs" if BOOK_CLFS
	67	default "clfs2" if BOOK_CLFS2
	68	default "clfs3" if BOOK_CLFS3
	69
	70	config RUN_ME
	71	string
	72	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_CLFS \|\| \
	73	BOOK_CLFS2 \|\| BOOK_CLFS_3
	74	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	75	#--- End BOOK/script
	76
	77	#--- Book version
	78	choice
	79	prompt "Release"
	80	default relSVN if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_BLFS
	81	default relGIT if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	82
	83	config relSVN
	84	bool "SVN"
	85	depends on BOOK_LFS \|\| BOOK_BLFS \|\| BOOK_LFS_SYSD
	86	help
	87	Current development version as in trunk
	88
	89	config relGIT
	90	bool "GIT"
	91	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	92	help
	93	Current development git master branch
	94
	95	config WORKING_COPY
	96	bool "Working Copy"
	97	help
	98	A local working copy
	99
	100	config BRANCH
	101	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
	102	help
	103	A supported SVN/GIT branch or stable released book
	104	endchoice
	105
	106	config BRANCH_ID
	107	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	108	default "EDIT ME"
	109	depends BRANCH
	110	help
	111	A list of valid branches and stable book IDs is available at
	112	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	113
	114	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	115	YYY version.
	116
	117	config BOOK
	118	string "Loc of working copy (mandatory)"
	119	default "EDIT ME"
	120	depends WORKING_COPY
	121	help
	122	The full path to a local copy of the book XML sources
	123
	124	#--- End BOOK version
	125
	126	#--- CLFS specific params
	127	choice
	128	prompt "Target architecture"
	129	default ARCH_X86
	130	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	131	help
	132	Choose the target system base architecture
	133
	134	config ARCH_X86
	135	bool "x86"
	136
	137	config ARCH_MIPS
	138	bool "mips" if !BOOK_CLFS2
	139
	140	config ARCH_PPC
	141	bool "ppc" if BOOK_CLFS
	142
	143	config ARCH_SPARC
	144	bool "sparc" if BOOK_CLFS
	145
	146	config ARCH_ALPHA
	147	bool "alpha" if !BOOK_CLFS3
	148
	149	config ARCH_ARM
	150	bool "arm" if !BOOK_CLFS
	151
	152	config ARCH_HPPA
	153	bool "hppa" if BOOK_CLFS2
	154	endchoice
	155
	156	choice
	157	prompt "Hardware Platform"
	158	depends BOOK_CLFS3 && ARCH_MIPS
	159	default PLATFORM_GENERIC
	160	help
	161	Choose a destination platform
	162	Platform specific files will be included
	163
	164	config PLATFORM_GENERIC
	165	bool "Generic platform"
	166
	167	config PLATFORM_WRT
	168	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	169	endchoice
	170
	171	choice
	172	prompt "Library"
	173	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
	174	default DATA_32
	175	help
	176	Choose the target system libraries type
	177
	178	config DATA_32
	179	bool "32-bit"
[a705708]	180
[e5d44f5]	181	config DATA_64
	182	bool "64-bit"
	183
	184	config DATA_MULTI
	185	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
	186	endchoice
[a705708]	187
[e5d44f5]	188	choice
	189	prompt "Processor type"
	190	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
	191	help
	192	Choose the target system processor
[a705708]	193
[e5d44f5]	194	config PROC_i486
	195	bool "486 Compatibles" if ARCH_X86
[a705708]	196
[e5d44f5]	197	config PROC_i586
	198	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	199
[e5d44f5]	200	config PROC_i686
	201	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	202
[e5d44f5]	203	config PROC_mipsel
	204	bool "MIPS Little Endian" if ARCH_MIPS
[2035ea1]	205
[e5d44f5]	206	config PROC_mips
	207	bool "MIPS Big Endian" if ARCH_MIPS
[2035ea1]	208
[e5d44f5]	209	config PROC_unknown
	210	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	211
[e5d44f5]	212	config PROC_hppa1
	213	bool "PA 7000 Series" if ARCH_HPPA
[c560e9a]	214
[e5d44f5]	215	config PROC_hppa2
	216	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	217
[e5d44f5]	218	config PROC_EV5
	219	bool "EV5 Series" if ARCH_ALPHA
[c560e9a]	220
[e5d44f5]	221	config PROC_EV56
	222	bool "EV56 Series" if ARCH_ALPHA
[c560e9a]	223
[e5d44f5]	224	config PROC_PCA56
	225	bool "PCA56 Series" if ARCH_ALPHA
[c560e9a]	226
[e5d44f5]	227	config PROC_PCA57
	228	bool "PCA57 Series" if ARCH_ALPHA
[c560e9a]	229
[e5d44f5]	230	config PROC_EV6
	231	bool "EV6 Series" if ARCH_ALPHA
[c560e9a]	232
[e5d44f5]	233	config PROC_EV67
	234	bool "EV67 Series" if ARCH_ALPHA
[a87e07a]	235
[e5d44f5]	236	config PROC_EV68
	237	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	238
[e5d44f5]	239	config PROC_ARM
	240	bool "Generic arm, little endian" if ARCH_ARM
[a87e07a]	241
[e5d44f5]	242	config PROC_ARM5L
	243	bool "Generic arm, version 5, little endian" if ARCH_ARM
[650acce]	244
[e5d44f5]	245	config PROC_ARM5B
	246	bool "Generic arm, version 5, big endian" if ARCH_ARM
[650acce]	247
[e5d44f5]	248	config PROC_ULTRA1
	249	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[650acce]	250
[e5d44f5]	251	config PROC_ULTRA2
	252	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[a705708]	253
[e5d44f5]	254	config PROC_ULTRA3
	255	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	256	endchoice
[c63c0fa]	257
[e5d44f5]	258	choice
	259	prompt "MIPS 64 ABI"
	260	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
	261	default ABI_64
	262	help
	263	Choose the target system ABI to use
[c63c0fa]	264
[e5d44f5]	265	config ABI_32
	266	bool "o32"
[c63c0fa]	267
[e5d44f5]	268	config ABI_N32
	269	bool "n32"
[c63c0fa]	270
[e5d44f5]	271	config ABI_64
	272	bool "n64"
	273	endchoice
[c5ff430]	274
[e5d44f5]	275	config TARGET
	276	string
	277	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	278	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	279	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[2639f65]	280
[e5d44f5]	281	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	282	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	283	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	284
[e5d44f5]	285	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[a705708]	286
[e5d44f5]	287	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	288	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	289	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	290	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	291
[e5d44f5]	292	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
	293	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
	294	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	295	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	296
[e5d44f5]	297	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	298	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI \|\| DATA_64)
[2035ea1]	299
[e5d44f5]	300	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	301	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	302
	303	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
	304	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	305	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	306
	307	default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
	308
	309	default "arm-unknown-linux-uclibc" if PROC_ARM
	310	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	311	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
	312
	313	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	314	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	315	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	316	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	317	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	318	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	319	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	320	default "alphaev68-unknown-linux-gnu" if PROC_EV68
	321
	322	config TARGET32
	323	string
	324	depends DATA_MULTI
	325	default "i686-pc-linux-gnu" if ARCH_X86
	326	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	327	default "mips-unknown-linux-gnu" if PROC_mips
	328	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	329	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	330
	331	config PLATFORM
	332	string
	333	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	334	default "WRT - Wireless Router" if PLATFORM_WRT
	335
	336	config SPARC64_PROC
	337	string
	338	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	339	default "1" if PROC_ULTRA1
	340	default "2" if PROC_ULTRA2
	341	default "3" if PROC_ULTRA3
	342
	343	config ARCH
	344	string
	345	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	346	default "x86_64" if ARCH_X86 && DATA_MULTI
	347	default "x86_64-64" if ARCH_X86 && DATA_64
	348
	349	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	350
	351	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	352	default "mips64" if ARCH_MIPS && DATA_MULTI
	353	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
	354
	355
	356	default "ppc" if ARCH_PPC && DATA_32
	357	default "ppc64" if ARCH_PPC && DATA_MULTI
	358	default "ppc64-64" if ARCH_PPC && DATA_64
	359
	360	default "sparc" if ARCH_SPARC && DATA_32
	361	default "sparc64" if ARCH_SPARC && DATA_MULTI
	362	default "sparc64-64" if ARCH_SPARC && DATA_64
	363
	364	default "alpha" if ARCH_ALPHA
	365	default "arm" if ARCH_ARM
	366	default "hppa" if ARCH_HPPA
	367
	368	config MIPS_LEVEL
	369	string
	370	depends BOOK_CLFS3 && ARCH_MIPS
	371	default "1" if DATA_32
	372	default "3" if DATA_64
	373
	374	config ABI
	375	string
	376	depends BOOK_CLFS3
	377	default "-m32" if ARCH_X86 \|\| ARCH_ARM
	378	# default "-m64" if NO USED YET IN THE BOOK
	379	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	380	default "-mabi=n32" if ABI_N32
	381	default "-mabi=64" if ABI_64
	382
	383	config ENDIAN
	384	string
	385	depends BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
	386	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	387	default "big" if PROC_mips \|\| PROC_ARM5B
	388
	389	choice
	390	prompt "Build method"
	391	depends BOOK_CLFS
	392	help
	393	What build method should be used: a chroot jail or minimal boot
	394	system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
	395	a full explanation.
	396
	397	config BUILD_CHROOT
	398	bool "chroot"
	399
	400	config BUILD_BOOT
	401	bool "boot"
	402	endchoice
	403
	404	config METHOD
	405	string
	406	default "chroot" if BUILD_CHROOT
	407	default "boot" if BUILD_BOOT
	408
	409	config BOOT_CONFIG
	410	string "BOOT kernel config file (mandatory)"
	411	default "*EDIT ME*"
	412	depends on BUILD_BOOT
	413	help
	414	If METHOD=boot, location of boot-kernel config file
	415	The config file will be copied to ${BUILD_DIR}/sources
	416	and renamed 'bootkernel-config'
	417	NOTE: this setting is required
	418	#--- End CLFS specific params
	419
	420	#--- blfs-tool Support
	421	config BLFS_TOOL
	422	bool "Add blfs-tool support"
	423	default n
	424	depends on !BOOK_CLFS3 && !BOOK_BLFS
	425	help
	426	Activating this option will install additional packages needed
	427	to use blfs tools after booting the new system.
	428	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	429	(see below).
	430	After booting the new xLFS system, but before using the blfs tools,
	431	you should create a user account, move the /blfs_root directory
	432	to that user's home, and change its ownership to that of the user.
	433	Also, be sure to give the user read and write access on the
	434	$TRACKING_DIR directory and the files that it contains.
	435	Don't forget to configure sudo properly on the new system.
	436
	437	config DUMMY # Avoid indenting the items below
	438	bool
	439
	440	if BLFS_TOOL
	441	menu "blfs-tool dependencies"
	442
	443	config DEP_LIBXML
	444	bool "libxml2 (required)"
	445	default y
	446
	447	config DEP_LIBXSLT
	448	bool "libxslt (required)"
	449	default y
	450
	451	config DEP_DBXML
	452	bool "DocBook XML DTD (required)"
	453	default y
	454
	455	config DEP_LYNX
	456	bool "lynx (optional, for reading the generated book)"
	457	default y
	458
	459	config DEP_SUDO
	460	bool "sudo (recommended)"
	461	default y
	462
	463	config DEP_WGET
	464	bool "wget (recommended)"
	465	default y
	466
	467	config DEP_GPM
	468	bool "GPM (optional, see help)"
	469	default n
	470	help
	471	if you install gpm, it will be started
[90f5b6d]	472	automatically on boot. It allows copy-paste
	473	while Xorg is not installed.
[e5d44f5]	474
	475	config DEP_SVN
	476	bool "SVN client (optional, see help)"
	477	default n
	478	help
	479	Subversion is needed for updating the book
[90f5b6d]	480	sources. You do not need it if building a
	481	stable book.
[e5d44f5]	482
	483	endmenu
	484
	485	choice
	486	prompt "BLFS Release"
	487	default BLFS_SVN
	488
	489	config BLFS_SVN
	490	bool "BLFS SVN"
	491	help
	492	Current development version as in trunk
	493
	494	config BLFS_WORKING_COPY
	495	bool "BLFS working copy"
	496	help
	497	A local working copy of the BLFS book.
	498
	499	config BLFS_BRANCH
	500	bool "BLFS Branch or stable book"
	501	help
	502	A supported SVN branch or stable book release
	503	endchoice
	504
	505	config BLFS_WC_LOCATION
	506	string "Location of the local BLFS working copy (mandatory)"
	507	default "EDIT ME"
	508	depends on BLFS_WORKING_COPY
	509	help
[506120ee]	510	Full path to the BLFS book working copy
[e5d44f5]	511
	512	config BLFS_BRANCH_ID
	513	string "BLFS Book Version (mandatory)"
	514	default "EDIT ME"
	515	depends on BLFS_BRANCH
	516	help
	517	A list of valid branches and stable book IDs is available at
	518	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	519	endif
	520	#--- End blfs-tool Support
	521
	522	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	523	# or directly)
	524	config BLFS_ROOT
	525	string "Root of the tools directory (see help)"
	526	default "/blfs_root"
	527	depends on BLFS_TOOL \|\| BOOK_BLFS
	528	help
	529	Path to the directory where all required files and scripts
	530	will be stored.
	531
	532	This path must begin with a slash, and:
	533	- is relative to the user's HOME directory when installing the
	534	blfs tools on an already existing LFS system.
	535	- is relative to the root of the build directory (`/' in chroot)
	536	when adding the tools after a jhalfs run
	537
	538	CAUTION: this directory will be removed if it already exists.
	539
	540	config BLFS_XML
	541	string "BLFS sources directory (internal parameter)"
	542	default "blfs-xml"
	543	depends BLFS_TOOL \|\| BOOK_BLFS
	544	help
	545	The directory name under $BLFS_ROOT where the BLFS
	546	book sources will be copied or checked out. Do not change that
	547	unless you know what you are doing...
[506120ee]	548
[f733772]	549	config LFS_XML
	550	string "LFS sources directory (internal parameter)"
	551	default "lfs-xml"
	552	depends BLFS_TOOL \|\| BOOK_BLFS
	553	help
	554	The directory name under $BLFS_ROOT where the LFS
	555	book sources will be copied or checked out. Do not change that
	556	unless you know what you are doing...
	557
[506120ee]	558	choice
	559	prompt "LFS Release"
	560	default LFS_SVN
	561	depends BOOK_BLFS
	562
	563	config LFS_relSVN
	564	bool "LFS SVN"
	565	help
	566	Current development version as in trunk
	567
	568	config LFS_WORKING_COPY
	569	bool "LFS working copy"
	570	help
	571	A local working copy of the LFS book.
	572
	573	config LFS_BRANCH
	574	bool "LFS Branch or stable book"
	575	help
	576	A supported SVN branch or stable book release
	577	endchoice
	578
	579	config BLFS_LFS_BOOK
	580	string "Location of the local LFS working copy (mandatory)"
	581	default "EDIT ME"
	582	depends on LFS_WORKING_COPY
	583	help
	584	Full path to the LFS book working copy"
	585
	586	config BLFS_LFS_BRANCH_ID
	587	string "LFS Book Version (mandatory)"
	588	default "EDIT ME"
	589	depends on LFS_BRANCH
	590	help
	591	A list of valid branches and stable book IDs is available at
	592	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	593	# End of BLFS parameters
	594
	595	#--- Custom Tools support
	596	config CUSTOM_TOOLS
	597	depends !BOOK_BLFS
	598	bool "Add custom tools support"
	599	default n
	600	help
	601	Activating this option additional packages you create
	602	will be installed after finished the xLFS system build.
	603	#--- End Custom Tools support
	604
	605	#--- This direcotry is needed for blfs tools installation and custom tools
	606	# As well.
	607	config TRACKING_DIR
	608	string "Installed packages database directory"
	609	default "/var/lib/jhalfs/BLFS"
	610	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	611	help
	612	Full path to the directory where the database of
	613	installed packages will be created.
	614
	615	If the blfs tools are installed on a running xLFS system,
	616	the user must have enough privileges to create this directory.
	617	It may be necessary to create the /var/lib/jhalfs directory as
	618	root, and make it writable by the user before running this tool.
	619
	620	If you are installing the blfs tools as part of an xLFS build
	621	and/or using the customized scripts feature, you will
	622	need to fix this directory's permissions after booting
	623	the new system.
	624
	625	Note that the user that will build the packages must
	626	have read and write access to this directory.
[53f291f]	627
[a705708]	628	#--- End BOOK Settings
	629	endmenu
	630
[e5d44f5]	631	menu "General Settings"
	632	depends !BOOK_BLFS
	633
[b7583ec]	634	#--- {C,H,}LFS User Account
	635
	636	config LUSER
[e5d44f5]	637	string
	638	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	639	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
	640	default "hlfs" if BOOK_HLFS
	641
	642	config LGROUP
	643	string
[b7583ec]	644	default LUSER
[e5d44f5]	645
	646	config LHOME
	647	string
[b7583ec]	648	default "/home"
	649
[e5d44f5]	650	#--- End Set User Account
	651
	652	config BUILDDIR
	653	string "Build Directory"
	654	default "/mnt/build_dir"
	655	help
	656	#-- The directory where the created system will be located.
	657	# NOTE: A working directory named jhalfs will be created
	658	# here, so ensure this does not conflict with the jhalfs
	659	# source directory.
	660
	661	config GETPKG
	662	bool "Retrieve source files"
	663	default n
	664	help
	665	#-- Download all packages and patches required by the selected book
	666	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	667	# first and if necessary retrieves them from the 'net.
	668	# Files will be transferred to $BUILDDIR/sources.
	669
	670	config SRC_ARCHIVE
	671	string "Package Archive Directory"
	672	default "$SRC_ARCHIVE"
	673	depends GETPKG
	674	help
	675	#-- A local archive for packages/files (not $BUILDDIR/sources)
	676	# Any missing file will be downloaded and archived here,
	677	# if the user has the right privileges.
	678
	679	config RETRYSRCDOWNLOAD
	680	bool "Retry on 'connection refused' failure"
	681	default n
	682	depends GETPKG
	683	help
	684	#-- Attempt to download a source package again if it fails
	685	# with a 'connection refused' error. This can happen on
	686	# servers that are overloaded.
	687
	688	config RETRYDOWNLOADCNT
	689	int "Number of retry attempts on download failures"
	690	default 20
	691	depends GETPKG
	692	help
	693	#-- Number of times to retry a failed download.
	694
	695	config DOWNLOADTIMEOUT
	696	int "Download timeout (in seconds)"
	697	default 30
	698	depends GETPKG
	699	help
	700	#-- Number of seconds to wait for a download to start before
	701	# timing out.
	702
	703	config SERVER
	704	string "FTP mirror"
	705	default "http://ftp.osuosl.org"
	706	depends GETPKG
	707	help
	708	#-- FTP mirror to download packages and patches if not found
	709	# in $SRC_ARCHIVE
	710	# As a last resort, the files will downloaded from upstream,
	711	# if possible.
	712
	713	config RUNMAKE
	714	bool "Run the makefile"
	715	default n
	716	help
	717	#-- Automatically run the makefile once it has been created
	718
	719	config CLEAN
	720	bool "Rebuild files"
	721	default n
	722	help
	723	#-- Clean the build directory before performing any other task.
	724	# The directory is cleaned only if it was populated by a
	725	# previous JHALFS run.
[a705708]	726
	727	#--- End General Settings
	728	endmenu
	729
[e5d44f5]	730	menu "Build Settings"
	731	depends !BOOK_BLFS
	732
	733	#--- Test Suites
	734	config CONFIG_TESTS
	735	bool "Run testsuites"
	736	depends !BOOK_CLFS2 && !BOOK_CLFS3
	737	default y
	738	help
	739	#-- Run test suites
[1d5f3e3]	740	# If you select 'y' here:
[e5d44f5]	741	# You will have to select between:
[945ccaa]	742	# - Only critical final system testsuites
[e5d44f5]	743	# - All final system testsuites
	744	# - Both temporary tools and final system testsuites
	745	# You will be prompted also about the "flavour" of the
	746	# testsuites run:
	747	# - Don't stop on test suite failures
	748	# - Abort the build at the first test suite failure
	749	#
[1d5f3e3]	750	# Note that in any case, all the test instructions will
	751	# be generated. Those which are not wanted will be commented
	752	# out. If you select 'n' here, the commented test instructions
	753	# do not stop on test suite failures.
	754	#
	755	# HLFS and CLFS have no testsuites available in the
	756	# temporary tools phase
[e5d44f5]	757
[945ccaa]	758	menu "Test settings"
	759	depends CONFIG_TESTS
[e5d44f5]	760	choice
	761	prompt "Tests level"
	762	default TST_1
	763
	764	config TST_1
[945ccaa]	765	bool "Only final system critical testsuites"
	766	help
	767	#-- Critical tests:
	768	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	769	# testsuites for final system. The others are commented
	770	# out.
[e5d44f5]	771
	772	config TST_2
	773	bool "All final system testsuites"
[1d5f3e3]	774	help
	775	#-- All final system test suites:
	776	# Test instructions for the temporary tools (if available)
	777	# are commented out.
[e5d44f5]	778
	779	config TST_3
[945ccaa]	780	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
	781	help
	782	#-- All tests:
[1d5f3e3]	783	# Runs all the testsuites for both temporary tools (if
	784	# available) and final system
[e5d44f5]	785	endchoice
	786
	787	choice
	788	prompt "Flavour"
	789
	790	config NO_BOMB
[945ccaa]	791	bool "Don't stop on test failures"
[e5d44f5]	792
	793	config BOMB
[945ccaa]	794	bool "Abort the build on the first test failure"
[e5d44f5]	795	endchoice
	796
[945ccaa]	797	config TEST
	798	int
	799	default "0" if !CONFIG_TESTS
	800	default "1" if TST_1
	801	default "2" if TST_2
	802	default "3" if TST_3
	803
[e5d44f5]	804	config BOMB_TEST
	805	bool
	806	default n if NO_BOMB
	807	default y if BOMB
	808
	809	#--- End Test Suites
[945ccaa]	810	endmenu # test settings
[e5d44f5]	811
	812	#--- Package Management
	813	config PKGMNGT
	814	bool "Package management"
	815	depends BOOK_LFS \|\| BOOK_LFS_SYSD
	816	default n
	817	help
	818	#-- Use package management
	819	#
[945ccaa]	820	# If set, you'll have to choose between
	821	# two package management styles:
	822	# - Build and install:
	823	# the packages in the final phase are built
	824	# in a separate directory, PKG_DEST.
	825	# You should provide a bash function for
[4b2a5fd]	826	# packaging and installing the package.
[945ccaa]	827	# - Preload a library before install:
	828	# Run the install instructions inside a
	829	# wrapper command, which monitors the
	830	# installed files.
	831	#
[e5d44f5]	832	# Also, you have to provide the instructions
	833	# to build the package manager during the
	834	# temporary tools phase, in the form of a
	835	# sect1 of the book identical to a package
	836	# sect1. See README.PACKAGE_MANAGEMENT
	837	#
	838	# For now, this only works with LFS
[945ccaa]	839	choice
	840	depends PKGMNGT
	841	prompt "Package management style"
	842	default PKG_PACK
	843
	844	config PKG_PACK
	845	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	846
[945ccaa]	847	config LIB_LOAD
	848	bool "Preload a library before installing (porg style)"
	849	endchoice
	850
	851	config WRAP_INSTALL
	852	bool
	853	default y if LIB_LOAD
	854	default n if PKG_PACK
[e5d44f5]	855	#--- End package management
	856
	857	#--- Installed files logs
	858	config INSTALL_LOG
	859	bool "Create a log of installed files for each package"
	860	default n
	861	help
	862	#-- Select this if you want to create logs of the files
	863	# installed by each package on the final system.
	864
	865	#--- End Installed files logs
	866
[945ccaa]	867	config STRIP
	868	bool "Strip Installed Binaries/Libraries"
	869	default n
	870	depends on !BOOK_CLFS3
	871
[dc7fd7b]	872	config DEL_LA_FILES
[d2a7ec8]	873	bool "Remove libtool .la files"
[dc7fd7b]	874	default y
	875	help
	876	#-- Remove files libxxx.la installed by libtool. For a rationale
	877	# see https://blog.flameeyes.eu/tags/lafiles/
	878
[945ccaa]	879	config NO_PROGRESS_BAR
	880	bool "DO NOT use/display progress_bar "
	881	default n
	882	help
	883	#-- Do not use the progress bar routine. On slower machines
	884	# this function consumes precious CPU cycles.
	885
	886	#--- End Build Settings
	887	endmenu
	888
[6990d80]	889	menu "System configuration"
[945ccaa]	890	depends !BOOK_BLFS
	891
[e5d44f5]	892	#--- FSTAB
	893	config HAVE_FSTAB
	894	bool "Use a custom fstab file"
	895	default n
	896	help
	897	#-- Select this if you have an fstab file with entries
[945ccaa]	898	# for the target system
[a705708]	899
[e5d44f5]	900	config FSTAB
	901	string "Fstab file (optional)"
	902	default "*EDIT ME*"
	903	depends on HAVE_FSTAB
	904	help
	905	#-- The location of fstab file (if empty, a template is created)
	906	#--- End FSTAB
	907
	908	#--- Kernel
	909	config CONFIG_BUILD_KERNEL
	910	bool "Build the kernel"
	911	default n
	912	help
	913	#-- Select this option if you wish to build the kernel.
	914	#
	915	# You will be prompted for the full path to the .config
	916	# file. It will be copied to the 'sources' directory and
	917	# renamed kernel-config
	918
	919	config CONFIG
	920	string "Kernel config file"
	921	default "*EDIT ME*"
	922	depends on CONFIG_BUILD_KERNEL
	923	help
	924	#-- Fully qualified path to a kernel config file
	925	# The config file will be copied to ${BUILD_DIR}/sources
	926	# and renamed 'kernel-config'
	927	#--- End Kernel
	928
	929	config VIMLANG
	930	bool "Install vim-lang package"
	931	default n
	932	depends on !BOOK_HLFS && !BOOK_CLFS3
	933	help
	934	#-- Install the optional vim-lang package
	935	# NOTE: This option is obsolete with the 7.3 release of Vim
	936	# which is included in all recent releases of LFS.
	937
	938	config TIMEZONE
	939	string "TimeZone"
	940	default "GMT"
	941	help
	942	#-- The timezone as output by tzselect
	943	# This will be copied to /etc/localtime
	944
	945	config LANG
	946	string "Language"
	947	default "$LANG"
	948	help
	949	#-- LANG variable set in /etc/profile
	950	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	951	# for values (or the file localedata/SUPPORTED in glibc tarball)
	952
	953	config FULL_LOCALE
	954	bool "Install the full set of locales"
	955	default n
	956	help
	957	#-- If set to y, the full set of supported locales
	958	# will be installed. Otherwise, only the minimal set
	959	# necessary for the tests will be installed,
	960	# together with the locale associated with the
	961	# LANG you have chosen, if not in the minimal set.
	962
	963	#--- Groff page
	964	choice
	965	prompt "Groff page size"
	966	default PAGE_LETTER
	967	help
	968	#-- Page definition for groff: letter or A4
	969
	970	config PAGE_LETTER
	971	bool "letter"
	972
	973	config PAGE_A4
	974	bool "A4"
	975	endchoice
	976
	977	config PAGE
	978	string
	979	default "letter" if PAGE_LETTER
	980	default "A4" if PAGE_A4
	981	#--- End Groff page
[a705708]	982
[945ccaa]	983	config HOSTNAME
[6990d80]	984	string "Hostname (see help)"
[945ccaa]	985	default "EDITME"
[6990d80]	986	help
	987	If you are on a public network, use the hostname given to you by
	988	your institution, or corporation, etc. If your network is private,
	989	that is, behind a firewall such as a box to connect to your ISP,
	990	you can choose anything you'd like. Combined with the domain name
	991	"local", you have the possibility to access your computer by name
	992	instead of address on the private network (see RFC 6762 and
	993	https://www.howtogeek.com/167190/).
[945ccaa]	994
	995	menu "Network configuration"
	996	config INTERFACE
	997	string "netword card name"
	998	default "eth0"
[6990d80]	999	help
	1000	eth0 is used in most cases. Virtual insterfaces may get other
	1001	names (for example enp0s3 for the default network stack in qemu).
	1002	Systemd may also rename network interfaces according to their
	1003	bus addresses.
[945ccaa]	1004	config IP_ADDR
	1005	string "Static IP address"
	1006	default "10.0.2.9"
[6990d80]	1007	help
	1008	The default here is for a virtual interface in qemu. Private
	1009	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	1010	You have to know your network prefix. Then the last figure
	1011	may be anything you like.
	1012
[945ccaa]	1013	config GATEWAY
	1014	string "Gateway"
	1015	default "10.0.2.2"
[6990d80]	1016	help
	1017	Again, this default is for a qemu network stack. Usually, the
	1018	gateway is the address of your firewall.
[945ccaa]	1019	config PREFIX
	1020	string "Subnet prefix"
	1021	default "24"
[6990d80]	1022	help
	1023	Again, this default is for a qemu network stack, but is also
	1024	the most used in private networks.
[945ccaa]	1025	config BROADCAST
	1026	string "Broadcast address"
	1027	default "10.0.2.255"
	1028	config DOMAIN
[6990d80]	1029	string "Domain name (see help)"
	1030	default "local"
	1031	help
	1032	Domain Name:
	1033	Doamin names are registered, so if your computer is on a public
	1034	network, you cannot use any name you'd like. On a public
	1035	network, you should have been given a domain name by
	1036	your corporation, institution, etc.
	1037	If your network is really private, that is behind a firewall
	1038	such as a box for connecting to an ISP, you can choose any
	1039	domain you'd like. You can also opt for "local", see RFC 6762,
	1040	or "something.test", see RFC 6761.
[945ccaa]	1041	config DNS1
	1042	string "Primary Name server"
	1043	default "10.0.2.3"
	1044	config DNS2
	1045	string "Secondary Name server"
	1046	default "8.8.8.8"
	1047	endmenu # Network configuration
	1048
	1049	menu "Console configuration"
	1050	config FONT
	1051	string "Console font"
	1052	default "lat0-16"
[3b43e17b]	1053	help
	1054	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	1055	etc, must be done manually.
[945ccaa]	1056	config KEYMAP
	1057	string "Keymap name"
	1058	default "us"
[3b43e17b]	1059	config LOCAL
	1060	boolean "Hardware clock is set to local time"
	1061	default n
	1062	help
	1063	If the harware clock is set to local time, answer yes,
	1064	If it is set to UTC, answer no
	1065	config LOG_LEVEL
	1066	string "Default log level (1-8)"
	1067	default "4"
	1068	depends BOOK_LFS
	1069	help
	1070	This can be changed using dmesg. 1 means "no message",
	1071	8 shows every message sent by the kernel, which is very
	1072	noisy. The default at boot time is 7, which is quite
	1073	noisy too.
[945ccaa]	1074	endmenu # Console configuration
	1075
	1076	endmenu #--- System configuration
[a705708]	1077
[e5d44f5]	1078	menu "Advanced Features"
	1079	depends !BOOK_BLFS
	1080
	1081	config REPORT
	1082	bool "Create SBU and disk usage report"
	1083	default y
	1084
	1085	#--- ICA/farce
	1086	config COMPARE
	1087	bool "Run comparison analysis on final stage"
	1088	depends !BOOK_CLFS2 && !BOOK_CLFS3
	1089	default n
	1090	help
	1091	#-- Should an iterative comparison analysis be performed?
	1092	#
	1093	# Unless you are familiar with ICA and/or FARCE do not
	1094	# select this option
	1095	#
	1096	# ICA and FARCE are analysis tools for comparing one
	1097	# build to the next. Builds mays differ from one iteration
	1098	# to another due to the build order and these tools try
	1099	# to ferret out those differences by examining the stored
	1100	# build logs and binary files.
	1101	#
	1102	# The scripts are well commented and can be found in ./extras/*
	1103	#
	1104
	1105	config ITERATIONS
	1106	int "Number of test runs (2,3,4,5)" if COMPARE
	1107	depends on COMPARE
	1108	range 2 5
	1109	default 3
	1110
	1111	config RUN_ICA
	1112	bool "ICA testing"
	1113	depends on COMPARE
	1114	default y
	1115	help
	1116	#-- Run ICA testing
	1117
	1118	config RUN_FARCE
	1119	bool "farce testing"
	1120	depends on COMPARE
	1121	default n
	1122	help
	1123	#-- Run farce testing
	1124	#--- End ICA/farce
	1125
	1126	#--- Optimizations
[0536270]	1127	if !BOOK_CLFS2 && !BOOK_CLFS3
[e5d44f5]	1128	config CONFIG_OPTIMIZE
	1129	bool "Optimization and parallelization"
	1130	default n
	1131	help
	1132	# Opens a menu for various optimization settings:
	1133	# Actual optimization flags MUST be defined in ./optimize/*
	1134	# before activating this option.
	1135	#
	1136	# WARNING: The use of build optimizations may lead to build issues.
	1137	# If the system doesn't work as expected, please rebuild
	1138	# without optimizations before asking for support.
	1139	menu "Optimization settings"
	1140	depends on CONFIG_OPTIMIZE
	1141
	1142	config N_PARALLEL
	1143	int "Number of parallel `make' jobs"
	1144	default 1
	1145	help
	1146	#-- The usual recommandation is (number of CPU cores)+1
	1147	# Do not set for meaningful SBU calculations.
	1148
	1149	choice
	1150	prompt "Optimization level "
	1151	default OPT_1
	1152	help
	1153	#-- Optimization values are set in optimize/* files
	1154
	1155	config OPT_1
	1156	bool "Final system only"
	1157
	1158	config OPT_2
	1159	bool "Both temp tools and final system"
	1160
	1161	config OPT_3
	1162	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
	1163	endchoice
[84a3fda]	1164
	1165	config REALSBU
	1166	bool "Build Binutls pass1 without optimization (Real SBU)"
	1167	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	1168	default n
	1169	help
	1170	#-- Use -j1 in make invokation for Binutils pass1 to
	1171	# get a valid SBU value.
	1172
[854854e]	1173	endmenu
[e5d44f5]	1174	config OPTIMIZE
	1175	int
	1176	default "0" if !CONFIG_OPTIMIZE
	1177	default "1" if OPT_1
	1178	default "2" if OPT_2
	1179	default "3" if OPT_3
[045b2dc]	1180	endif
[84a3fda]	1181
[e5d44f5]	1182	#--- End Optimizations
[a705708]	1183
[e5d44f5]	1184	#-- Internal Settings
	1185	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	1186
[e5d44f5]	1187	config SCRIPT_ROOT
	1188	string "Scripts root"
	1189	default "jhalfs"
[4da2512]	1190
[e5d44f5]	1191	config JHALFSDIR
	1192	string "jhalfs directory"
	1193	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	1194
[e5d44f5]	1195	config LOGDIRBASE
	1196	string "Build logs directory basename"
	1197	default "logs"
[93346ee]	1198
[e5d44f5]	1199	config LOGDIR
	1200	string "Build logs directory"
	1201	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	1202
[e5d44f5]	1203	config TESTLOGDIRBASE
	1204	string "Test suites logs directory basename"
	1205	default "test-logs"
[4da2512]	1206
[e5d44f5]	1207	config TESTLOGDIR
	1208	string "Test suites logs directory"
	1209	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	1210
[e5d44f5]	1211	config FILELOGDIRBASE
	1212	string "Installed files logs directory basename"
	1213	default "installed-files"
[93346ee]	1214
[e5d44f5]	1215	config FILELOGDIR
	1216	string "Installed files logs directory"
	1217	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1218
[e5d44f5]	1219	config ICALOGDIR
	1220	string "ICA logs directory"
	1221	default "$LOGDIR/ICA"
[4da2512]	1222
[e5d44f5]	1223	config FARCELOGDIR
	1224	string "farce logs directory"
	1225	default "$LOGDIR/farce"
[4da2512]	1226
[e5d44f5]	1227	config MKFILE
	1228	string "Makefile"
	1229	default "$JHALFSDIR/Makefile"
[4da2512]	1230
[e5d44f5]	1231	config XSL
	1232	string "XSL stylesheet"
	1233	default "$PROGNAME.xsl"
[4da2512]	1234
[e5d44f5]	1235	config PKG_LST
	1236	string "Package contents list"
	1237	default "unpacked"
[4da2512]	1238
[e5d44f5]	1239	#--- End Internal Settings
	1240	endmenu
[4da2512]	1241
[a705708]	1242	#--- End Advanced Features
	1243	endmenu
[7b6ecc5]	1244
[a16f769]	1245	config REBUILD_MAKEFILE
[e5d44f5]	1246	depends !BOOK_BLFS
	1247	bool "Rebuild the Makefile (see help)"
	1248	default n
	1249	help
	1250	#-- Rebuild the Makefile
	1251	#
	1252	# This option allows to rebuild the Makefile after
	1253	# customizing the base system build scripts.
	1254	#
	1255	# See README.CUSTOM for more info about this feature.
[7b6ecc5]	1256

Note: See TracBrowser for help on using the repository browser.

Download in other formats: