Context Navigation

source: Config.in@ d992b48

2.3.x

Last change on this file since d992b48 was 390de72, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago
Merged r3438:3440 from trunk.
Property mode set to `100644`
File size: 26.1 KB

Rev	Line
[a705708]	1	menu "--- BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	#-- Select the BOOK/Build style you wish to configure.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch"
	12
	13	config BOOK_CLFS
	14	bool "Cross-Compiled Linux From Scratch"
	15
	16	config BOOK_CLFS2
[abf2c47]	17	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
[a705708]	18
[2639f65]	19	config BOOK_CLFS3
	20	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
[a705708]	21
	22	config BOOK_HLFS
	23	bool "Hardened Linux From Scratch"
	24
[d3ce173]	25	config BOOK_BLFS
	26	bool "Beyond Linux From Scratch"
[a705708]	27	endchoice
	28
[4da2512]	29	config PROGNAME
	30	string
	31	default "lfs" if BOOK_LFS
	32	default "clfs" if BOOK_CLFS
	33	default "clfs2" if BOOK_CLFS2
[2639f65]	34	default "clfs3" if BOOK_CLFS3
[4da2512]	35	default "hlfs" if BOOK_HLFS
	36	default "blfs" if BOOK_BLFS
	37
[a705708]	38	config RUN_ME
	39	string
[4da2512]	40	default "./jhalfs run" if !BOOK_BLFS
	41	default "./blfs-tool" if BOOK_BLFS
[a705708]	42	#--- End BOOK/script
	43
	44	#--- Book version
	45	choice
	46	prompt "Release"
	47	default relSVN
	48	config relSVN
	49	bool "SVN"
	50	help
	51	#-- Current development version as in trunk
	52
	53	config WORKING_COPY
	54	bool "Working Copy"
[d3ce173]	55	depends on !BOOK_BLFS
[a705708]	56	help
	57	#-- A local working copy
	58
	59	config BRANCH
[0536270]	60	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	61	help
	62	#-- A supported SVN branch or stable released book
	63	endchoice
	64
	65	config BRANCH_ID
[401f81e]	66	string "Book Version (mandatory)"
[a705708]	67	default "EDIT ME"
	68	depends BRANCH
	69	help
	70	#-- A list of valid branches and stable books ID's is available here.
	71	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	72
	73	config BOOK
	74	string "Loc of working copy (mandatory)"
	75	default "EDIT ME"
	76	depends WORKING_COPY
	77	help
	78	#-- The full path to a local copy of the book XML sources
	79	#
	80	#--- End BOOK version
	81
	82	#--- CLFS specific params
	83	choice
	84	prompt "Target architecture"
	85	default ARCH_X86
[2639f65]	86	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[a705708]	87	help
[c63c0fa]	88	#-- Choose the target system base architecture
[a705708]	89
	90	config ARCH_X86
	91	bool "x86"
	92
	93	config ARCH_MIPS
[c5ff430]	94	bool "mips" if !BOOK_CLFS2
[a705708]	95
	96	config ARCH_PPC
[2035ea1]	97	bool "ppc" if BOOK_CLFS
[a705708]	98
	99	config ARCH_SPARC
[2035ea1]	100	bool "sparc" if BOOK_CLFS
[a705708]	101
	102	config ARCH_ALPHA
[7d6d6f7]	103	bool "alpha" if !BOOK_CLFS3
[a705708]	104
	105	config ARCH_ARM
[a87e07a]	106	bool "arm" if !BOOK_CLFS
[2035ea1]	107
	108	config ARCH_HPPA
	109	bool "hppa" if BOOK_CLFS2
[a705708]	110	endchoice
	111
[9bbf240]	112	choice
	113	prompt "Hardware Platform"
	114	depends BOOK_CLFS3 && ARCH_MIPS
	115	default PLATFORM_GENERIC
	116	help
	117	# Chose a destination platform
	118	# Platform specific files will be included
	119
	120	config PLATFORM_GENERIC
	121	bool "Generic platform"
[7d6d6f7]	122
[9bbf240]	123	config PLATFORM_WRT
	124	bool "WRT - MIPS based wireless router" if ARCH_MIPS
	125	endchoice
[7d6d6f7]	126
[a705708]	127	choice
	128	prompt "Library"
[02c88a6]	129	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
	130	default DATA_32
[c63c0fa]	131	help
	132	#-- Choose the target system libraries type
[a705708]	133
	134	config DATA_32
[02c88a6]	135	bool "32-bit"
[a705708]	136
	137	config DATA_64
[02c88a6]	138	bool "64-bit" if !ARCH_PPC
[a705708]	139
	140	config DATA_MULTI
[9bbf240]	141	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
[a705708]	142	endchoice
	143
	144	choice
[2035ea1]	145	prompt "Processor type"
[650acce]	146	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
[c63c0fa]	147	help
	148	#-- Choose the target system processor
[a705708]	149
	150	config PROC_i486
[02c88a6]	151	bool "486 Compatibles" if ARCH_X86
[a705708]	152
	153	config PROC_i586
[02c88a6]	154	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
[a705708]	155
	156	config PROC_i686
[02c88a6]	157	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
[a705708]	158
	159	config PROC_mipsel
[2035ea1]	160	bool "MIPS Little Endian" if ARCH_MIPS
[a705708]	161
	162	config PROC_mips
[2035ea1]	163	bool "MIPS Big Endian" if ARCH_MIPS
	164
	165	config PROC_unknown
[c560e9a]	166	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
[2035ea1]	167
	168	config PROC_hppa1
	169	bool "PA 7000 Series" if ARCH_HPPA
	170
	171	config PROC_hppa2
	172	bool "PA 8000 Series" if ARCH_HPPA
[c560e9a]	173
	174	config PROC_EV5
	175	bool "EV5 Series" if ARCH_ALPHA
	176
	177	config PROC_EV56
	178	bool "EV56 Series" if ARCH_ALPHA
	179
	180	config PROC_PCA56
	181	bool "PCA56 Series" if ARCH_ALPHA
	182
	183	config PROC_PCA57
	184	bool "PCA57 Series" if ARCH_ALPHA
	185
	186	config PROC_EV6
	187	bool "EV6 Series" if ARCH_ALPHA
	188
	189	config PROC_EV67
	190	bool "EV67 Series" if ARCH_ALPHA
	191
	192	config PROC_EV68
	193	bool "EV68 Series" if ARCH_ALPHA
[a87e07a]	194
	195	config PROC_ARM
	196	bool "Generic arm, little endian" if ARCH_ARM
	197
	198	config PROC_ARM5L
	199	bool "Generic arm, version 5, little endian" if ARCH_ARM
	200
	201	config PROC_ARM5B
	202	bool "Generic arm, version 5, big endian" if ARCH_ARM
[650acce]	203
	204	config PROC_ULTRA1
	205	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	206
	207	config PROC_ULTRA2
	208	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
	209
	210	config PROC_ULTRA3
	211	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[a705708]	212	endchoice
	213
[c63c0fa]	214	choice
	215	prompt "MIPS 64 ABI"
	216	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
	217	default ABI_64
	218	help
	219	#-- Choose the target system ABI to use
	220
	221	config ABI_32
	222	bool "o32"
	223
	224	config ABI_N32
	225	bool "n32"
	226
	227	config ABI_64
	228	bool "n64"
	229	endchoice
	230
[a705708]	231	config TARGET
	232	string
[02c88a6]	233	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
	234	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
	235	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
[c5ff430]	236
[02c88a6]	237	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
	238	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
	239	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
[2639f65]	240
[02c88a6]	241	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
[2639f65]	242
[02c88a6]	243	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
	244	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
	245	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
	246	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
[a705708]	247
[02c88a6]	248	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
[f600e66]	249	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
[02c88a6]	250	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
	251	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
[a705708]	252
[02c88a6]	253	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
	254	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && DATA_MULTI
[a705708]	255
[02c88a6]	256	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
	257	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
[2035ea1]	258
[c560e9a]	259	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
[02c88a6]	260	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
	261	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
	262
[a87e07a]	263	default "arm-unknown-linux-gnu" if ARCH_ARM && BOOK_CLFS2
	264
	265	default "arm-unknown-linux-uclibc" if PROC_ARM
	266	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
	267	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
[c560e9a]	268
	269	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
	270	default "alphaev5-unknown-linux-gnu" if PROC_EV5
	271	default "alphaev56-unknown-linux-gnu" if PROC_EV56
	272	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
	273	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
	274	default "alphaev6-unknown-linux-gnu" if PROC_EV6
	275	default "alphaev67-unknown-linux-gnu" if PROC_EV67
	276	default "alphaev68-unknown-linux-gnu" if PROC_EV68
[a705708]	277
	278	config TARGET32
	279	string
	280	depends DATA_MULTI
	281	default "i686-pc-linux-gnu" if ARCH_X86
[02c88a6]	282	default "mipsel-unknown-linux-gnu" if PROC_mipsel
	283	default "mips-unknown-linux-gnu" if PROC_mips
[a705708]	284	default "sparc-unknown-linux-gnu" if ARCH_SPARC
	285	default "powerpc-unknown-linux-gnu" if ARCH_PPC
	286
[9bbf240]	287	config PLATFORM
	288	string
[650acce]	289	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
	290	default "WRT - Wireless Router" if PLATFORM_WRT
	291
	292	config SPARC64_PROC
	293	string
	294	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
	295	default "1" if PROC_ULTRA1
	296	default "2" if PROC_ULTRA2
	297	default "3" if PROC_ULTRA3
[9bbf240]	298
[a705708]	299	config ARCH
	300	string
[02c88a6]	301	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
	302	default "x86_64" if ARCH_X86 && DATA_MULTI
	303	default "x86_64-64" if ARCH_X86 && DATA_64
[a705708]	304
[9bbf240]	305	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
	306
[02c88a6]	307	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
	308	default "mips64" if ARCH_MIPS && DATA_MULTI
	309	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
[c5ff430]	310
[9bbf240]	311
[02c88a6]	312	default "ppc" if ARCH_PPC && DATA_32
	313	default "ppc64" if ARCH_PPC && DATA_MULTI
[a705708]	314
[02c88a6]	315	default "sparc" if ARCH_SPARC && DATA_32
	316	default "sparc64" if ARCH_SPARC && DATA_MULTI
	317	default "sparc64-64" if ARCH_SPARC && DATA_64
	318
	319	default "alpha" if ARCH_ALPHA
	320	default "arm" if ARCH_ARM
	321	default "hppa" if ARCH_HPPA
[7d6d6f7]	322
[c5ff430]	323	config MIPS_LEVEL
	324	string
	325	depends BOOK_CLFS3 && ARCH_MIPS
	326	default "1" if DATA_32
	327	default "3" if DATA_64
	328
[a99baaf]	329	config ABI
	330	string
	331	depends BOOK_CLFS3
[71a527c]	332	default "-m32" if ARCH_X86 \|\| ARCH_ARM
[c63c0fa]	333	# default "-m64" if NO USED YET IN THE BOOK
	334	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
	335	default "-mabi=n32" if ABI_N32
	336	default "-mabi=64" if ABI_64
[2035ea1]	337
[9436828]	338	config ENDIAN
	339	string
	340	depends BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
	341	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
	342	default "big" if PROC_mips \|\| PROC_ARM5B
	343
[a705708]	344	choice
	345	prompt "Build method"
	346	depends BOOK_CLFS
	347	help
	348	#-- What build method should be used: a chroot jail or minimal boot system
	349	# Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for a full explanation.
	350
	351	config BUILD_CHROOT
	352	bool "chroot"
	353
	354	config BUILD_BOOT
	355	bool "boot"
	356	endchoice
	357
	358	config METHOD
	359	string
	360	default "chroot" if BUILD_CHROOT
	361	default "boot" if BUILD_BOOT
	362
	363	config BOOT_CONFIG
	364	string "BOOT kernel config file (mandatory)"
	365	default "*EDIT ME*"
	366	depends on BUILD_BOOT
	367	help
	368	#-- If METHOD=boot, location of boot-kernel config file
	369	# The config file will be copied to ${BUILD_DIR}/sources
	370	# and renamed 'bootkernel-config'
	371	#
	372	# NOTE: this setting is required
	373	#--- End CLFS specific params
	374
	375	#--- HLFS specific params
[401f81e]	376	config GRSECURITY_HOST
[a705708]	377	bool "Building on grsecurity enabled host?"
	378	default n
	379	depends on BOOK_HLFS
	380	help
	381	#-- If your build system has grsecurity patches applied
	382	# you MUST enable this switch.
	383
	384	choice
	385	prompt "Library"
	386	depends on BOOK_HLFS
	387	help
	388	#-- Which library model to use: uClibc/glibc
	389
	390	config LIB_GLIBC
	391	bool "glibc"
	392
	393	config LIB_UCLIBC
	394	bool "uClibc"
	395	endchoice
	396
	397	config MODEL
	398	depends on BOOK_HLFS
	399	string
	400	default "glibc" if LIB_GLIBC
	401	default "uclibc" if LIB_UCLIBC
[5c575e1]	402
	403	choice
	404	prompt "Kernel series"
	405	depends on BOOK_HLFS
	406	help
	407	#-- Which kernel series to use: 2.6/2.4
	408
	409	config KERNEL_26
	410	bool "2.6 kernel series"
	411
	412	config KERNEL_24
	413	bool "2.4 kernel series"
	414	endchoice
	415
	416	config KERNEL
	417	depends on BOOK_HLFS
	418	string
	419	default "2.6" if KERNEL_26
	420	default "2.4" if KERNEL_24
[d035526]	421
[6d5844c]	422	# menu "HLFS Additional Features"
	423	# depends on BOOK_HLFS
	424	#
	425	# config SET_SSP
	426	# bool "Stack-smashing protector"
	427	# default y
	428	#
	429	# config SET_ASLR
	430	# bool "Address-space layout randomization"
	431	# default y
	432	#
	433	# config SET_PAX
	434	# bool "PaX-aware ELF executables and kernel"
	435	# default y
	436	#
	437	# config SET_HARDENED_TMP
	438	# bool "Hardened temporary files creation"
	439	# default y
	440	#
	441	# config SET_WARNINGS
	442	# bool "Additional warnings"
	443	# default y
	444	#
	445	# config SET_MISC
	446	# bool "Miscellaneous features"
	447	# default y
	448	#
	449	# config SET_BLOWFISH
	450	# bool "Blowfish passwords"
	451	# default y
	452	# endmenu
[d035526]	453
	454	config SSP
[249fa6a]	455	# depends on SET_SSP
[d035526]	456	string
	457	default ",ssp,"
	458
	459	config ASLR
[249fa6a]	460	# depends on SET_ASLR
[d035526]	461	string
	462	default ",aslr,"
	463
	464	config PAX
[249fa6a]	465	# depends on SET_PAX
[d035526]	466	string
	467	default ",pax,"
	468
	469	config HARDENED_TMP
[249fa6a]	470	# depends on SET_HARDENED_TMP
[d035526]	471	string
	472	default ",hardened_tmp,"
	473
	474	config WARNINGS
[249fa6a]	475	# depends on SET_WARNINGS
[d035526]	476	string
	477	default ",warnings,"
	478
	479	config MISC
[249fa6a]	480	# depends on SET_MISC
[d035526]	481	string
	482	default ",misc,"
	483
	484	config BLOWFISH
[249fa6a]	485	# depends on SET_BLOWFISH
[d035526]	486	string
	487	default ",blowfish,"
[a705708]	488	#--- End HLFS specific params
	489
[53f291f]	490	#--- Custom Tools support
	491	config CUSTOM_TOOLS
[3e7ceed]	492	bool "Add custom tools support"
[53f291f]	493	default n
[3e7ceed]	494	depends on !BOOK_BLFS
[53f291f]	495	help
	496	#--- Activating this option additional packages you create
[3e7ceed]	497	# will be installed after finished the xLFS system build.
[53f291f]	498	#
	499	#--- End Custom Tools support
	500
[4965fa8]	501	#--- blfs-tool Support
	502	config BLFS_TOOL
	503	bool "Add blfs-tool support"
	504	default n
[cd4466f]	505	depends on !BOOK_BLFS && !BOOK_CLFS3
[4965fa8]	506	help
[339fd84]	507	#--- Activating this option will install additional
[99d04a0]	508	# packages needed to use blfs-tool when booting
[339fd84]	509	# the new system.
[4965fa8]	510	#
	511	# The blfs-tool files will be installed under
	512	# $BUILD_DIR/blfs_root.
	513
	514	# After booting the new xLFS system you should to
[cd4466f]	515	# create an user account and move the /blfs-root
[4965fa8]	516	# directory to the user's home, making he the
	517	# directory and files owner, before start
	518	# using blfs-tool.
	519	#
[7b84722]	520	# Also, be sure to bring to that user read and write
	521	# privileges over the $TRACKING_DIR directory and
	522	# the files that it contains.
[4965fa8]	523	#
	524	# And don't forget to configure sudo properly.
	525
	526	choice
	527	prompt "BLFS Release"
	528	default BLFS_SVN
	529	depends on BLFS_TOOL
	530	config BLFS_SVN
	531	bool "BLFS SVN"
	532	help
	533	#-- Current development version as in trunk
	534
	535	config BLFS_BRANCH
	536	bool "BLFS Branch or stable book"
	537	help
	538	#-- A supported SVN branch or stable released book
	539	endchoice
	540
	541	config BLFS_BRANCH_ID
	542	string "BLFS Book Version (mandatory)"
	543	default "EDIT ME"
	544	depends on BLFS_BRANCH
	545	help
	546	#-- A list of valid branches and stable books ID's is available here.
	547	# http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	548
	549	menu "blfs-tool dependencies"
	550	depends on BLFS_TOOL
	551
	552	config DEP_LIBXML
	553	bool "libxml2 (required)"
	554	default y
	555
	556	config DEP_LIBXSLT
	557	bool "libxslt (required)"
	558	default y
	559
[045b2dc]	560	config DEP_TIDY
	561	bool "tidy (required)"
	562	default y
	563
	564	config DEP_DBXML
	565	bool "DocBook XML DTD (required)"
	566	default y
	567
	568	config DEP_UNZIP
	569	bool "UnZip (required to install DocBook XML DTD)"
	570	default y
	571	depends on DEP_DBXML
	572
[e05fba2]	573	#config DEP_DBXSL
	574	#bool "DocBook XSL (required)"
	575	#default y
[4965fa8]	576
[390de72]	577	config DEP_LYNX
	578	bool "lynx (required)"
[4965fa8]	579	default y
	580
	581	config DEP_SUDO
	582	bool "sudo (recommended)"
	583	default y
	584
	585	config DEP_WGET
	586	bool "wget (recommended)"
	587	default y
	588
	589	config DEP_GPM
	590	bool "GPM (optional, see help)"
	591	default y
	592	help
	593	#-- You MUST to install manually the gpm bootscript
[339fd84]	594	# and create its configuration file.
	595	#
	596	# An alternative is to unselect this option and
[99d04a0]	597	# install gpm, its configuration file, and its
[339fd84]	598	# bootscript using the custom tools support.
	599
	600	config DEP_SVN
	601	bool "SVN client (optional, see help)"
	602	default n
	603	help
	604	#-- Subversion-1.3.1 will be installed. This version is
[99d04a0]	605	# old but does not rely on additional packages to be
	606	# built.
[339fd84]	607	#
	608	# If you are happy with this old version and don't
	609	# need extra features, select this option.
[4965fa8]	610	endmenu
	611	#--- End blfs-tool Support
	612
[d3ce173]	613	#--- BLFS specific params
	614	config BLFS_ROOT
	615	string "Directory root"
[4965fa8]	616	default "$HOME/blfs_root" if BOOK_BLFS
	617	default "/blfs_root" if BLFS_TOOL
	618	depends on BOOK_BLFS \|\| BLFS_TOOL
[d3ce173]	619	help
	620	#-- Full path to the directory where all required
	621	# files and scripts will be stored.
	622
	623	config BLFS_XML
	624	string "BLFS sources directory"
	625	default "blfs-xml"
[4965fa8]	626	depends on BOOK_BLFS \|\| BLFS_TOOL
[d3ce173]	627	help
[4965fa8]	628	#-- The directory name under $BLFS_ROOT where BLFS book
	629	# sources will be checkout.
[f4ed135]	630
	631	config TRACKING_DIR
	632	string "Installed packages database directory"
	633	default "/var/lib/jhalfs/BLFS"
[53f291f]	634	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
[f4ed135]	635	help
	636	#-- Full path to the directory where the installed
	637	# packages database will be created.
	638	#
[53f291f]	639	# If you are installing blfs-tool on a running xLFS system
	640	# you MUST to create manually this directory.
	641	#
	642	# If you are installing blfs-tool as part of a xLFS build
	643	# and/or using the customized scripts feature, you will
	644	# need to fix that directory permissions after booting
	645	# the new system.
[4965fa8]	646	#
[f4ed135]	647	# Note that the user that will build the packages must
	648	# have read and write privileges on that directory.
[d3ce173]	649	#--- End BLFS specific params
[53f291f]	650
[a705708]	651	#--- End BOOK Settings
	652	endmenu
	653
	654	menu "--- General Settings"
[d3ce173]	655	depends on !BOOK_BLFS
[a705708]	656
	657	#--- Set User Account
	658	config CONFIG_USER
[962793a]	659	bool "Change the default user/group and homedir for this build"
[a705708]	660	default n
	661	help #-- Unprivileged user and group name
	662	# If you do not have the priv to create/delete
	663	# users and groups you can specifiy your own
	664	# user id for the build
	665	#
	666	# default values for each book
[962793a]	667	# LFS lfs
	668	# CLFS* clfs
	669	# HLFS hlfs
	670	#
	671	# Also, if your host place users home dirs into a
	672	# directory other than /home you can specify it here.
[a705708]	673
	674	config DEF_USER
	675	string
	676	default "lfs" if BOOK_LFS
[2639f65]	677	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
[a705708]	678	default "hlfs" if BOOK_HLFS
	679
	680	config SET_USER
	681	string "User account"
	682	depends CONFIG_USER
	683	default DEF_USER
	684
	685	config CONFIG_GROUP
	686	bool "Set Group?"
	687	default n
	688	depends CONFIG_USER
	689
	690	config SET_GROUP
	691	string "GROUP account"
	692	depends CONFIG_GROUP
	693	default DEF_USER
	694
[962793a]	695	config CONFIG_HOME
	696	bool "Set home dir?"
	697	default n
	698	depends CONFIG_USER
	699
	700	config SET_HOME
	701	string "Path to the directory where user home dir will be created"
	702	depends CONFIG_HOME
	703	default "/home"
	704
[a705708]	705	config LUSER
	706	string
	707	default DEF_USER if !CONFIG_USER
	708	default SET_USER if CONFIG_USER
	709
	710	config LGROUP
	711	string
	712	default LUSER if !CONFIG_GROUP
	713	default SET_GROUP if CONFIG_GROUP
[962793a]	714
	715	config LHOME
	716	string
	717	default "/home" if !CONFIG_HOME
	718	default SET_HOME if CONFIG_HOME
[a705708]	719	#--- End Set User Account
	720
	721	config BUILDDIR
	722	string "Build Directory"
	723	default "/mnt/build_dir"
	724	help
	725	#-- The directory where the created system will be located.
	726
[401f81e]	727	config GETPKG
[a705708]	728	bool "Retrieve source files"
	729	default n
	730	help
	731	#-- Download all packages and patches required by the book selected
	732	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	733	# first and if necessary retrieve them from the 'net.
	734	# Files will be transfered to $BUILDDIR/sources.
	735
	736	config SRC_ARCHIVE
	737	string "Package Archive Directory"
	738	default "$SRC_ARCHIVE"
[401f81e]	739	depends GETPKG
[a705708]	740	help
	741	#-- A local archive for packages/file (not $BUILDDIR/sources)
	742	# Used only if GETPKG = 1
	743	# Any missing file will be downloaded and archived here,
	744	# if the user has the right priviledges.
	745
[4da2512]	746	config SERVER
	747	string "FTP mirror"
	748	default "ftp://ftp.lfs-matrix.net"
	749	depends GETPKG
	750	help
	751	#-- FTP mirror to download packages and patches if not found
	752	# in $SRC_ARCHIVE
	753	# As a last resort, the files will dowloaded from upstream,
	754	# if possible.
	755
[401f81e]	756	config GETKERNEL
[3d7b6621]	757	bool "Always retrieve kernel package (see help)"
[7e45406]	758	default y if BOOK_LFS \|\| BOOK_HLFS
[401f81e]	759	depends GETPKG
[a705708]	760	help
[3d7b6621]	761	#-- Get the kernel package and patches even if no kernel
	762	# configuration file has been supplied.
	763
	764	# NOTE:
	765	# The kernel package must be available when building
[7e45406]	766	# the SVN version of LFS or HLFS to can install the
	767	# headers files.
	768	#
	769	# If building LFS-6.2 this setting can be disabled.
[a705708]	770
[401f81e]	771	config RUNMAKE
[a705708]	772	bool "Run the makefile"
	773	default n
	774	help
	775	#-- Automatically run the makefile once it has been created
	776
[401f81e]	777	config CLEAN
[a705708]	778	bool "Rebuild files"
	779	default n
	780	help
	781	#-- Clean the build directory before performing any other task.
	782	# The directory is cleaned only if it was populated by a
	783	# previous JHALFS run.
	784	#
	785
	786	#--- End General Settings
	787	endmenu
	788
	789	menu "--- Build Settings"
[d3ce173]	790	depends on !BOOK_BLFS
[a705708]	791
	792	#--- Test Suites
	793	config CONFIG_TESTS
	794	bool "Run testsuites"
[0536270]	795	depends !BOOK_CLFS2 && !BOOK_CLFS3
[401f81e]	796	default y
[a705708]	797	help
	798	#-- Run test suites
	799	#
	800	# You will can to select between:
	801	#
	802	# - Only final system Glibc, GCC and Binutils testsuites
	803	# - All final system testsuites
	804	# - Both temporary tools and final system testsuites
	805	#
	806	# HLFS and CLFS has no testsuites available in the
	807	# temporary tools phase
	808
	809	# You will be promt also about the "flavour" of the
	810	# testsuites run:
	811	#
	812	# - Don't stop on test suite failures
	813	# - Abort the build at the first test suite failure
	814	#
	815
	816	choice
[8e3ccf7]	817	prompt "Tests level"
[a705708]	818	depends CONFIG_TESTS
	819	default TEST_1
	820
	821	config TST_1
	822	bool "Only final system Glibc, GCC and Binutils testsuites"
	823
	824	config TST_2
	825	bool "All final system testsuites"
	826
	827	config TST_3
	828	bool "Both temporary tools and final system testsuites" if !BOOK_HLFS && !BOOK_CLFS
	829	endchoice
	830
	831	config TEST
	832	int
	833	default "0" if !CONFIG_TESTS
	834	default "1" if TST_1
	835	default "2" if TST_2
	836	default "3" if TST_3
	837
	838	choice
[8e3ccf7]	839	prompt "Flavour"
[a705708]	840	depends CONFIG_TESTS
	841
	842	config NO_BOMB
	843	bool "Don't stop on test suite failures"
	844
	845	config BOMB
	846	bool "Abort the build at the first test suite failure"
	847	endchoice
	848
	849	config BOMB_TEST
[401f81e]	850	bool
[8e3ccf7]	851	default n if NO_BOMB
	852	default y if BOMB
[401f81e]	853
[a705708]	854	#--- End Test Suites
	855
[93346ee]	856	#--- Installed files logs
	857	config INSTALL_LOG
	858	bool "Create installed files logs"
	859	default n
	860	help
	861	#-- Select this if you want to create logs of the files
	862	# installed by each package on the final system.
	863
	864	#--- End Installed files logs
	865
[a705708]	866	#--- FSTAB
	867	config HAVE_FSTAB
	868	bool "Use a custom fstab file"
	869	default n
	870	help
	871	#-- Select this if you have ready a proper fstab file
	872
	873	config FSTAB
	874	string "Fstab file (optional)"
	875	default "*EDIT ME*"
	876	depends on HAVE_FSTAB
	877	help
	878	#-- The location of fstab file (if empty, a template is created)
	879	#--- End FSTAB
	880
	881	#--- Kernel
	882	config CONFIG_BUILD_KERNEL
	883	bool "Build the kernel"
	884	default n
	885	help
	886	#-- Select this option if you wish to build the kernel.
	887	#
	888	# You will be prompted for the full path to the .config
	889	# file. It will be copied to the 'sources' directory and
	890	# rename kernel-config
	891
	892	config CONFIG
	893	string "Kernel config file"
	894	default "*EDIT ME*"
	895	depends on CONFIG_BUILD_KERNEL
	896	help
	897	#-- Fully qualified path to a kernel config file
	898	# The config file will be copied to ${BUILD_DIR}/sources
	899	# and renamed 'kernel-config'
	900	#--- End Kernel
	901
[401f81e]	902	config STRIP
[a705708]	903	bool "Strip Installed Binaries/Libraries"
	904	default y
[b230bd6]	905	depends on !BOOK_CLFS3
[a705708]	906
[401f81e]	907	config VIMLANG
[a705708]	908	bool "Install vim-lang package"
	909	default y
[1b9ceec]	910	depends on !BOOK_HLFS && !BOOK_CLFS3
[a705708]	911	help
[401f81e]	912	#-- Install the optional vim-lang package
[a705708]	913
	914	config TIMEZONE
	915	string "TimeZone"
	916	default "GMT"
	917	help
	918	#-- The timezone as output by tzselect
	919	# This will be copied to /etc/localtime
	920
	921	config LANG
	922	string "Language"
	923	default "$LANG"
	924	help
	925	#-- Language information in /etc/profile See <locale -a> for values
	926
	927	#--- Groff page
	928	choice
	929	prompt "Groff page size"
	930	default PAGE_LETTER
	931	help
	932	#-- Page definition for groff: letter or A4
	933
	934	config PAGE_LETTER
	935	bool "letter"
	936
	937	config PAGE_A4
	938	bool "A4"
	939	endchoice
	940
	941	config PAGE
	942	string
	943	default "letter" if PAGE_LETTER
	944	default "A4" if PAGE_A4
	945	#--- End Groff page
	946
	947	#--- End Build Settings
	948	endmenu
	949
	950	menu "--- Advanced Features"
[d3ce173]	951	depends on !BOOK_BLFS
[a705708]	952
[401f81e]	953	config REPORT
[a705708]	954	bool "Create SBU and disk usage report"
	955	default y
	956
	957	#--- ICA/farce
[401f81e]	958	config COMPARE
[a705708]	959	bool "Run comparison analysis on final stage"
[0536270]	960	depends !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	961	default n
	962	help
	963	#-- Should some iterative comparison analysis by made?
	964	#
	965	# Unless you are familiar with ICA and/or FARCE do not
	966	# select this option
	967	#
	968	# ICA and FARCE are analysis tools for comparing one
	969	# build to the next. Builds mays differ from one iteration
	970	# to another due to the build order and these tools try
	971	# to ferret out those differences by examining the stored
	972	# build logs and binary files.
	973	#
	974	# The scripts are well commented and can be found in ./extras/*
	975	#
	976
	977	config ITERATIONS
[401f81e]	978	int "Number of test runs (2,3,4,5)" if COMPARE
	979	depends on COMPARE
[a705708]	980	range 2 5
	981	default 3
	982
[401f81e]	983	config RUN_ICA
[a705708]	984	bool "ICA testing"
[401f81e]	985	depends on COMPARE
[a705708]	986	default y
	987	help
	988	#-- Run ICA testing
	989
[401f81e]	990	config RUN_FARCE
[a705708]	991	bool "farce testing"
[401f81e]	992	depends on COMPARE
[a705708]	993	default n
	994	help
	995	#-- Run farce testing
	996	#--- End ICA/farce
	997
[4da2512]	998	#--- Optimizations
[0536270]	999	if !BOOK_CLFS2 && !BOOK_CLFS3
[a705708]	1000	config CONFIG_OPTIMIZE
[4da2512]	1001	bool "Use optimization (see help)"
[a705708]	1002	default n
	1003	help
	1004	#-- Actual optimzation flags MUST be defined in ./optimize/*
	1005	# files before activate this option.
	1006	#
	1007	# WARNING: The use of build optimizations may be dangerous.
	1008	# You should know what you are doing and be sure that the
	1009	# optimization settings listed below are what you want.
	1010	# It there are build issues or the system doesn't work as
	1011	# expected, please rebuild without optimizations before
	1012	# asking for support.
	1013
	1014	choice
	1015	prompt "Optimization level "
	1016	default OPT_1
	1017	depends CONFIG_OPTIMIZE
	1018	help
	1019	#-- Optimization values are set in optimize/* files
	1020
	1021	config OPT_1
	1022	bool "Final system only"
	1023
	1024	config OPT_2
	1025	bool "Both temp tools and final system"
	1026	endchoice
	1027
	1028	config OPTIMIZE
	1029	int
	1030	default "0" if !CONFIG_OPTIMIZE
	1031	default "1" if OPT_1
	1032	default "2" if OPT_2
[045b2dc]	1033	endif
[a705708]	1034	#--- End Optimizations
	1035
[4da2512]	1036	#-- Internal Settings
	1037	menu "--- Internal Settings (WARNING: for jhalfs developers only)"
	1038
	1039	config SCRIPT_ROOT
	1040	string "Scripts root"
	1041	default "jhalfs"
	1042
	1043	config JHALFSDIR
	1044	string "jhalfs directory"
	1045	default "$BUILDDIR/$SCRIPT_ROOT"
	1046
[93346ee]	1047	config LOGDIRBASE
	1048	string "Build logs directory basename"
	1049	default "logs"
	1050
[4da2512]	1051	config LOGDIR
	1052	string "Build logs directory"
[93346ee]	1053	default "$JHALFSDIR/$LOGDIRBASE"
	1054
	1055	config TESTLOGDIRBASE
	1056	string "Test suites logs directory basename"
	1057	default "test-logs"
[4da2512]	1058
	1059	config TESTLOGDIR
	1060	string "Test suites logs directory"
[93346ee]	1061	default "$JHALFSDIR/$TESTLOGDIRBASE"
	1062
	1063	config FILELOGDIRBASE
	1064	string "Installed files logs directory basename"
	1065	default "installed-files"
	1066
	1067	config FILELOGDIR
	1068	string "Installed files logs directory"
	1069	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	1070
	1071	config ICALOGDIR
	1072	string "ICA logs directory"
	1073	default "$LOGDIR/ICA"
	1074
	1075	config FARCELOGDIR
	1076	string "farce logs directory"
	1077	default "$LOGDIR/farce"
	1078
	1079	config MKFILE
	1080	string "Makefile"
	1081	default "$JHALFSDIR/Makefile"
	1082
	1083	config XSL
	1084	string "XSL stylesheet"
	1085	default "$PROGNAME.xsl"
	1086
	1087	config PKG_LST
	1088	string "Package contents list"
	1089	default "unpacked"
	1090
	1091	#--- End Internal Settings
	1092	endmenu
	1093
[a705708]	1094	#--- End Advanced Features
	1095	endmenu
[7b6ecc5]	1096
[a16f769]	1097	config REBUILD_MAKEFILE
[7b6ecc5]	1098	bool "Rebuild the Makefile (see help)"
	1099	default n
	1100	depends on !BOOK_BLFS
	1101	help
	1102	#-- Rebuild the Makefile
	1103	#
	1104	# This option alow to rebuild the Makefile after
	1105	# customizing the base system build scripts.
	1106	#
	1107	# See README.CUSTOM for more info about this feature.
	1108

Note: See TracBrowser for help on using the repository browser.

Download in other formats: