Context Navigation

source: Config.in@ e3f41e33

ablfs-more trunk

Last change on this file since e3f41e33 was e3f41e33, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Remove legacy: remove CLFS books from Config.in

There are still some occurrence of CLFS (and HLFS), that will go away
at next commit, when removing temporary tools tests.

Property mode set to 100644

File size: 31.1 KB

Rev	Line
[e5d44f5]	1	menu "BOOK Settings"
	2
	3	#--- BOOK/script
	4	choice
	5	prompt "Use BOOK"
	6	default BOOK_LFS
	7	help
	8	Select the book where build instructions are retrieved.
	9
	10	config BOOK_LFS
	11	bool "Linux From Scratch System V"
	12	help
[706e5bf]	13	Set up the tools to build LFS with SysV init.
[e5d44f5]	14
	15	config BOOK_LFS_SYSD
	16	bool "Linux From Scratch systemd"
	17	help
	18	Set up the tools to build LFS with systemd init.
	19
	20	config BOOK_BLFS
	21	bool "Beyond Linux From Scratch (see help)"
	22	help
[e3f41e33]	23	if the LFS system has already been built, install the tools
[e5d44f5]	24	to build BLFS packages.
	25	endchoice
	26
[39dc04a]	27	choice
[f596dde]	28	depends on BOOK_BLFS
[39dc04a]	29	prompt "Init system"
	30
	31	config BLFS_SYSV
[706e5bf]	32	bool "BLFS SysV"
[39dc04a]	33	help
[706e5bf]	34	Extract the SysV flavour of the BLFS book
[39dc04a]	35
	36	config BLFS_SYSD
	37	bool "BLFS systemd"
	38	help
	39	Extract the systemd flavour of the BLFS book
	40
	41	endchoice
	42
[e5d44f5]	43	config INITSYS
	44	string
[39dc04a]	45	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	46	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	47
	48	config PROGNAME
	49	string
	50	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	51
	52	config RUN_ME
	53	string
[e3f41e33]	54	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	55	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	56	#--- End BOOK/script
	57
	58	#--- Book version
	59	choice
	60	prompt "Release"
[1e686d1]	61	default relGIT
[e5d44f5]	62
	63	config relGIT
	64	bool "GIT"
	65	help
[1e686d1]	66	Current development git trunk branch
[e5d44f5]	67
	68	config WORKING_COPY
	69	bool "Working Copy"
	70	help
	71	A local working copy
	72
	73	config BRANCH
[e3f41e33]	74	bool "Branch or stable book"
[e5d44f5]	75	help
[1e686d1]	76	A supported GIT branch or tag
[e5d44f5]	77	endchoice
	78
	79	config BRANCH_ID
	80	string "Branch (preceded by \"branch-\"), stable Version, or tag"
	81	default "EDIT ME"
[f596dde]	82	depends on BRANCH
[e5d44f5]	83	help
	84	A list of valid branches and stable book IDs is available at
	85	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
	86
	87	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
	88	YYY version.
	89
	90	config BOOK
	91	string "Loc of working copy (mandatory)"
	92	default "EDIT ME"
[f596dde]	93	depends on WORKING_COPY
[e5d44f5]	94	help
	95	The full path to a local copy of the book XML sources
	96
[13e52a5]	97	choice
	98	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && (BRANCH \|\| WORKING_COPY)
	99	prompt "Mutilib"
	100	default LFS_MULTILIB_NO
	101	config LFS_MULTILIB_NO
	102	bool "Standard LFS on i686 or amd64"
	103	help
[b6e981a]	104	Use standard LFS book (choose this if not multilib source)
[13e52a5]	105
	106	config LFS_MULTILIB_I686
	107	bool "Multilib LFS on amd64 with i686 libraries"
	108	help
	109	Use Multilib LFS book with i686 libraries
	110
	111	config LFS_MULTILIB_X32
	112	bool "Multilib LFS on amd64 with x32 libraries"
	113	help
	114	Use Multilib LFS book with x32 libraries
	115
	116	config LFS_MULTILIB_ALL
	117	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	118	help
	119	Use Multilib LFS book with i686 and x32 libraries
	120
	121	endchoice
	122
	123	config MULTILIB
	124	string
	125	default "default" if LFS_MULTILIB_NO
	126	default "ml_32" if LFS_MULTILIB_I686
	127	default "ml_x32" if LFS_MULTILIB_X32
	128	default "ml_all" if LFS_MULTILIB_ALL
	129
[e5d44f5]	130	#--- End BOOK version
	131
	132	choice
	133	prompt "Build method"
[e3f41e33]	134	default BUILD_CHROOT
[e5d44f5]	135	help
	136	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	137	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	138	a full explanation.
	139
	140	config BUILD_CHROOT
	141	bool "chroot"
	142
	143	config BUILD_BOOT
	144	bool "boot"
	145	endchoice
	146
	147	config METHOD
	148	string
	149	default "chroot" if BUILD_CHROOT
	150	default "boot" if BUILD_BOOT
	151
	152	config BOOT_CONFIG
	153	string "BOOT kernel config file (mandatory)"
	154	default "*EDIT ME*"
	155	depends on BUILD_BOOT
	156	help
	157	If METHOD=boot, location of boot-kernel config file
	158	The config file will be copied to ${BUILD_DIR}/sources
	159	and renamed 'bootkernel-config'
	160	NOTE: this setting is required
	161
	162	#--- blfs-tool Support
	163	config BLFS_TOOL
	164	bool "Add blfs-tool support"
	165	default n
[e3f41e33]	166	depends on !BOOK_BLFS
[e5d44f5]	167	help
	168	Activating this option will install additional packages needed
	169	to use blfs tools after booting the new system.
	170	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	171	(see below).
	172	After booting the new xLFS system, but before using the blfs tools,
	173	you should create a user account, move the /blfs_root directory
	174	to that user's home, and change its ownership to that of the user.
	175	Also, be sure to give the user read and write access on the
	176	$TRACKING_DIR directory and the files that it contains.
	177	Don't forget to configure sudo properly on the new system.
	178
	179	config DUMMY # Avoid indenting the items below
	180	bool
	181
	182	if BLFS_TOOL
	183	menu "blfs-tool dependencies"
	184
	185	config DEP_LIBXML
	186	bool "libxml2 (required)"
	187	default y
	188
	189	config DEP_LIBXSLT
	190	bool "libxslt (required)"
	191	default y
	192
	193	config DEP_DBXML
	194	bool "DocBook XML DTD (required)"
	195	default y
	196
	197	config DEP_LYNX
	198	bool "lynx (optional, for reading the generated book)"
	199	default y
	200
	201	config DEP_SUDO
	202	bool "sudo (recommended)"
	203	default y
	204
	205	config DEP_WGET
	206	bool "wget (recommended)"
	207	default y
	208
	209	config DEP_GPM
	210	bool "GPM (optional, see help)"
	211	default n
	212	help
	213	if you install gpm, it will be started
[90f5b6d]	214	automatically on boot. It allows copy-paste
	215	while Xorg is not installed.
[e5d44f5]	216
[1e686d1]	217	config DEP_GIT
	218	bool "GIT client (optional, see help)"
[e5d44f5]	219	default n
	220	help
[1e686d1]	221	Git is needed for updating the book
[90f5b6d]	222	sources. You do not need it if building a
	223	stable book.
[e5d44f5]	224
	225	endmenu
	226
	227	choice
	228	prompt "BLFS Release"
[1e686d1]	229	default BLFS_GIT
[e5d44f5]	230
[1e686d1]	231	config BLFS_GIT
	232	bool "BLFS GIT"
[e5d44f5]	233	help
	234	Current development version as in trunk
	235
	236	config BLFS_WORKING_COPY
	237	bool "BLFS working copy"
	238	help
	239	A local working copy of the BLFS book.
	240
	241	config BLFS_BRANCH
	242	bool "BLFS Branch or stable book"
	243	help
[1e686d1]	244	A supported GIT branch or stable (tag) book release
[e5d44f5]	245	endchoice
	246
	247	config BLFS_WC_LOCATION
	248	string "Location of the local BLFS working copy (mandatory)"
	249	default "EDIT ME"
	250	depends on BLFS_WORKING_COPY
	251	help
[506120ee]	252	Full path to the BLFS book working copy
[e5d44f5]	253
	254	config BLFS_BRANCH_ID
	255	string "BLFS Book Version (mandatory)"
	256	default "EDIT ME"
	257	depends on BLFS_BRANCH
	258	help
	259	A list of valid branches and stable book IDs is available at
	260	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
	261	endif
	262	#--- End blfs-tool Support
	263
	264	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	265	# or directly)
	266	config BLFS_ROOT
	267	string "Root of the tools directory (see help)"
	268	default "/blfs_root"
	269	depends on BLFS_TOOL \|\| BOOK_BLFS
	270	help
	271	Path to the directory where all required files and scripts
	272	will be stored.
	273
	274	This path must begin with a slash, and:
	275	- is relative to the user's HOME directory when installing the
	276	blfs tools on an already existing LFS system.
	277	- is relative to the root of the build directory (`/' in chroot)
	278	when adding the tools after a jhalfs run
	279
	280	CAUTION: this directory will be removed if it already exists.
	281
	282	config BLFS_XML
	283	string "BLFS sources directory (internal parameter)"
	284	default "blfs-xml"
[f596dde]	285	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	286	help
	287	The directory name under $BLFS_ROOT where the BLFS
	288	book sources will be copied or checked out. Do not change that
	289	unless you know what you are doing...
[506120ee]	290
[f733772]	291	config LFS_XML
	292	string "LFS sources directory (internal parameter)"
	293	default "lfs-xml"
[f596dde]	294	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	295	help
	296	The directory name under $BLFS_ROOT where the LFS
	297	book sources will be copied or checked out. Do not change that
	298	unless you know what you are doing...
	299
[506120ee]	300	choice
	301	prompt "LFS Release"
[1e686d1]	302	default LFS_relGIT
[f596dde]	303	depends on BOOK_BLFS
[506120ee]	304
[1e686d1]	305	config LFS_relGIT
	306	bool "LFS GIT"
[506120ee]	307	help
	308	Current development version as in trunk
	309
	310	config LFS_WORKING_COPY
	311	bool "LFS working copy"
	312	help
	313	A local working copy of the LFS book.
	314
	315	config LFS_BRANCH
	316	bool "LFS Branch or stable book"
	317	help
[1e686d1]	318	A supported GIT branch or stable (tag) book release
[506120ee]	319	endchoice
	320
	321	config BLFS_LFS_BOOK
	322	string "Location of the local LFS working copy (mandatory)"
	323	default "EDIT ME"
	324	depends on LFS_WORKING_COPY
	325	help
	326	Full path to the LFS book working copy"
	327
	328	config BLFS_LFS_BRANCH_ID
	329	string "LFS Book Version (mandatory)"
	330	default "EDIT ME"
	331	depends on LFS_BRANCH
	332	help
	333	A list of valid branches and stable book IDs is available at
	334	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
[e5d44f5]	335	# End of BLFS parameters
	336
	337	#--- Custom Tools support
	338	config CUSTOM_TOOLS
[f596dde]	339	depends on !BOOK_BLFS
[e5d44f5]	340	bool "Add custom tools support"
	341	default n
	342	help
	343	Activating this option additional packages you create
	344	will be installed after finished the xLFS system build.
	345	#--- End Custom Tools support
	346
[e3ccc27]	347	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	348	# As well.
	349	config TRACKING_DIR
	350	string "Installed packages database directory"
	351	default "/var/lib/jhalfs/BLFS"
	352	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	353	help
	354	Full path to the directory where the database of
	355	installed packages will be created.
	356
	357	If the blfs tools are installed on a running xLFS system,
	358	the user must have enough privileges to create this directory.
	359	It may be necessary to create the /var/lib/jhalfs directory as
	360	root, and make it writable by the user before running this tool.
	361
	362	If you are installing the blfs tools as part of an xLFS build
	363	and/or using the customized scripts feature, you will
	364	need to fix this directory's permissions after booting
	365	the new system.
	366
	367	Note that the user that will build the packages must
	368	have read and write access to this directory.
[53f291f]	369
[a705708]	370	#--- End BOOK Settings
	371	endmenu
	372
[e5d44f5]	373	menu "General Settings"
[e3ccc27]	374	depends on !BOOK_BLFS
[e5d44f5]	375
[b7583ec]	376	#--- {C,H,}LFS User Account
	377
	378	config LUSER
[e5d44f5]	379	string
	380	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
	381
	382	config LGROUP
	383	string
[b7583ec]	384	default LUSER
[e5d44f5]	385
	386	config LHOME
	387	string
[b7583ec]	388	default "/home"
	389
[e5d44f5]	390	#--- End Set User Account
	391
	392	config BUILDDIR
	393	string "Build Directory"
	394	default "/mnt/build_dir"
	395	help
	396	#-- The directory where the created system will be located.
	397	# NOTE: A working directory named jhalfs will be created
	398	# here, so ensure this does not conflict with the jhalfs
	399	# source directory.
	400
	401	config GETPKG
	402	bool "Retrieve source files"
	403	default n
	404	help
	405	#-- Download all packages and patches required by the selected book
	406	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	407	# first and if necessary retrieves them from the 'net.
	408	# Files will be transferred to $BUILDDIR/sources.
	409
	410	config SRC_ARCHIVE
	411	string "Package Archive Directory"
	412	default "$SRC_ARCHIVE"
[f596dde]	413	depends on GETPKG
[e5d44f5]	414	help
	415	#-- A local archive for packages/files (not $BUILDDIR/sources)
	416	# Any missing file will be downloaded and archived here,
	417	# if the user has the right privileges.
	418
	419	config RETRYSRCDOWNLOAD
	420	bool "Retry on 'connection refused' failure"
	421	default n
[f596dde]	422	depends on GETPKG
[e5d44f5]	423	help
	424	#-- Attempt to download a source package again if it fails
	425	# with a 'connection refused' error. This can happen on
	426	# servers that are overloaded.
	427
	428	config RETRYDOWNLOADCNT
	429	int "Number of retry attempts on download failures"
	430	default 20
[f596dde]	431	depends on GETPKG
[e5d44f5]	432	help
	433	#-- Number of times to retry a failed download.
	434
	435	config DOWNLOADTIMEOUT
	436	int "Download timeout (in seconds)"
	437	default 30
[f596dde]	438	depends on GETPKG
[e5d44f5]	439	help
	440	#-- Number of seconds to wait for a download to start before
	441	# timing out.
	442
	443	config SERVER
	444	string "FTP mirror"
	445	default "http://ftp.osuosl.org"
[f596dde]	446	depends on GETPKG
[e5d44f5]	447	help
	448	#-- FTP mirror to download packages and patches if not found
	449	# in $SRC_ARCHIVE
	450	# As a last resort, the files will downloaded from upstream,
	451	# if possible.
	452
	453	config RUNMAKE
	454	bool "Run the makefile"
	455	default n
	456	help
	457	#-- Automatically run the makefile once it has been created
	458
	459	config CLEAN
	460	bool "Rebuild files"
	461	default n
	462	help
	463	#-- Clean the build directory before performing any other task.
	464	# The directory is cleaned only if it was populated by a
	465	# previous JHALFS run.
[a705708]	466
	467	#--- End General Settings
	468	endmenu
	469
[e5d44f5]	470	menu "Build Settings"
[e3ccc27]	471	depends on !BOOK_BLFS
[e5d44f5]	472
	473	#--- Test Suites
	474	config CONFIG_TESTS
	475	bool "Run testsuites"
	476	default y
	477	help
	478	#-- Run test suites
[1d5f3e3]	479	# If you select 'y' here:
[e5d44f5]	480	# You will have to select between:
[945ccaa]	481	# - Only critical final system testsuites
[e5d44f5]	482	# - All final system testsuites
	483	# - Both temporary tools and final system testsuites
	484	# You will be prompted also about the "flavour" of the
	485	# testsuites run:
	486	# - Don't stop on test suite failures
	487	# - Abort the build at the first test suite failure
	488	#
[1d5f3e3]	489	# Note that in any case, all the test instructions will
	490	# be generated. Those which are not wanted will be commented
	491	# out. If you select 'n' here, the commented test instructions
	492	# do not stop on test suite failures.
[e5d44f5]	493
[945ccaa]	494	menu "Test settings"
[f596dde]	495	depends on CONFIG_TESTS
[e5d44f5]	496	choice
	497	prompt "Tests level"
	498	default TST_1
	499
	500	config TST_1
[945ccaa]	501	bool "Only final system critical testsuites"
	502	help
	503	#-- Critical tests:
	504	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	505	# testsuites for final system. The others are commented
	506	# out.
[e5d44f5]	507
	508	config TST_2
	509	bool "All final system testsuites"
[1d5f3e3]	510	help
	511	#-- All final system test suites:
	512	# Test instructions for the temporary tools (if available)
	513	# are commented out.
[e5d44f5]	514
	515	config TST_3
[945ccaa]	516	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
	517	help
	518	#-- All tests:
[1d5f3e3]	519	# Runs all the testsuites for both temporary tools (if
	520	# available) and final system
[e5d44f5]	521	endchoice
	522
	523	choice
	524	prompt "Flavour"
	525
	526	config NO_BOMB
[945ccaa]	527	bool "Don't stop on test failures"
[e5d44f5]	528
	529	config BOMB
[945ccaa]	530	bool "Abort the build on the first test failure"
[e5d44f5]	531	endchoice
	532
[30a8961]	533	endmenu # test settings
	534
[945ccaa]	535	config TEST
	536	int
	537	default "0" if !CONFIG_TESTS
	538	default "1" if TST_1
	539	default "2" if TST_2
	540	default "3" if TST_3
	541
[e5d44f5]	542	config BOMB_TEST
	543	bool
	544	default n if NO_BOMB
	545	default y if BOMB
[30a8961]	546	#--- End Test Suites
[e5d44f5]	547
	548	#--- Package Management
	549	config PKGMNGT
	550	bool "Package management"
[f596dde]	551	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	552	default n
	553	help
	554	#-- Use package management
	555	#
[945ccaa]	556	# If set, you'll have to choose between
	557	# two package management styles:
	558	# - Build and install:
	559	# the packages in the final phase are built
	560	# in a separate directory, PKG_DEST.
	561	# You should provide a bash function for
[4b2a5fd]	562	# packaging and installing the package.
[945ccaa]	563	# - Preload a library before install:
	564	# Run the install instructions inside a
	565	# wrapper command, which monitors the
	566	# installed files.
	567	#
[e5d44f5]	568	# Also, you have to provide the instructions
	569	# to build the package manager during the
	570	# temporary tools phase, in the form of a
	571	# sect1 of the book identical to a package
	572	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	573	choice
[f596dde]	574	depends on PKGMNGT
[945ccaa]	575	prompt "Package management style"
	576	default PKG_PACK
	577
	578	config PKG_PACK
	579	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	580
[945ccaa]	581	config LIB_LOAD
	582	bool "Preload a library before installing (porg style)"
	583	endchoice
	584
	585	config WRAP_INSTALL
	586	bool
	587	default y if LIB_LOAD
	588	default n if PKG_PACK
[e5d44f5]	589	#--- End package management
	590
	591	#--- Installed files logs
	592	config INSTALL_LOG
	593	bool "Create a log of installed files for each package"
	594	default n
	595	help
	596	#-- Select this if you want to create logs of the files
	597	# installed by each package on the final system.
	598
	599	#--- End Installed files logs
	600
[945ccaa]	601	config STRIP
	602	bool "Strip Installed Binaries/Libraries"
	603	default n
	604
[dc7fd7b]	605	config DEL_LA_FILES
[d2a7ec8]	606	bool "Remove libtool .la files"
[dc7fd7b]	607	default y
	608	help
	609	#-- Remove files libxxx.la installed by libtool. For a rationale
	610	# see https://blog.flameeyes.eu/tags/lafiles/
	611
[945ccaa]	612	config NO_PROGRESS_BAR
[f596dde]	613	bool "DO NOT use/display progress_bar"
[945ccaa]	614	default n
	615	help
	616	#-- Do not use the progress bar routine. On slower machines
	617	# this function consumes precious CPU cycles.
	618
	619	#--- End Build Settings
	620	endmenu
	621
[6990d80]	622	menu "System configuration"
[e3ccc27]	623	depends on !BOOK_BLFS
[945ccaa]	624
[e5d44f5]	625	#--- FSTAB
	626	config HAVE_FSTAB
	627	bool "Use a custom fstab file"
	628	default n
	629	help
	630	#-- Select this if you have an fstab file with entries
[945ccaa]	631	# for the target system
[a705708]	632
[e5d44f5]	633	config FSTAB
	634	string "Fstab file (optional)"
	635	default "*EDIT ME*"
	636	depends on HAVE_FSTAB
	637	help
	638	#-- The location of fstab file (if empty, a template is created)
	639	#--- End FSTAB
	640
	641	#--- Kernel
	642	config CONFIG_BUILD_KERNEL
	643	bool "Build the kernel"
	644	default n
	645	help
	646	#-- Select this option if you wish to build the kernel.
	647	#
	648	# You will be prompted for the full path to the .config
	649	# file. It will be copied to the 'sources' directory and
	650	# renamed kernel-config
	651
	652	config CONFIG
	653	string "Kernel config file"
	654	default "*EDIT ME*"
	655	depends on CONFIG_BUILD_KERNEL
	656	help
	657	#-- Fully qualified path to a kernel config file
	658	# The config file will be copied to ${BUILD_DIR}/sources
	659	# and renamed 'kernel-config'
	660	#--- End Kernel
	661
[085435e]	662	config NCURSES5
	663	bool "Install non-wide-character ncurses"
[e5d44f5]	664	default n
[085435e]	665	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	666	help
[085435e]	667	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	668
	669	config TIMEZONE
	670	string "TimeZone"
	671	default "GMT"
	672	help
	673	#-- The timezone as output by tzselect
	674	# This will be copied to /etc/localtime
	675
	676	config LANG
	677	string "Language"
	678	default "$LANG"
	679	help
	680	#-- LANG variable set in /etc/profile
	681	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	682	# for values (or the file localedata/SUPPORTED in glibc tarball)
	683
	684	config FULL_LOCALE
	685	bool "Install the full set of locales"
	686	default n
	687	help
	688	#-- If set to y, the full set of supported locales
	689	# will be installed. Otherwise, only the minimal set
	690	# necessary for the tests will be installed,
	691	# together with the locale associated with the
	692	# LANG you have chosen, if not in the minimal set.
	693
	694	#--- Groff page
	695	choice
	696	prompt "Groff page size"
	697	default PAGE_LETTER
	698	help
	699	#-- Page definition for groff: letter or A4
	700
	701	config PAGE_LETTER
	702	bool "letter"
	703
	704	config PAGE_A4
	705	bool "A4"
	706	endchoice
	707
	708	config PAGE
	709	string
	710	default "letter" if PAGE_LETTER
	711	default "A4" if PAGE_A4
	712	#--- End Groff page
[a705708]	713
[945ccaa]	714	config HOSTNAME
[6990d80]	715	string "Hostname (see help)"
[945ccaa]	716	default "EDITME"
[6990d80]	717	help
	718	If you are on a public network, use the hostname given to you by
	719	your institution, or corporation, etc. If your network is private,
	720	that is, behind a firewall such as a box to connect to your ISP,
	721	you can choose anything you'd like. Combined with the domain name
	722	"local", you have the possibility to access your computer by name
	723	instead of address on the private network (see RFC 6762 and
	724	https://www.howtogeek.com/167190/).
[945ccaa]	725
	726	menu "Network configuration"
	727	config INTERFACE
	728	string "netword card name"
	729	default "eth0"
[6990d80]	730	help
	731	eth0 is used in most cases. Virtual insterfaces may get other
	732	names (for example enp0s3 for the default network stack in qemu).
	733	Systemd may also rename network interfaces according to their
	734	bus addresses.
[945ccaa]	735	config IP_ADDR
	736	string "Static IP address"
	737	default "10.0.2.9"
[6990d80]	738	help
	739	The default here is for a virtual interface in qemu. Private
	740	networks have addresses in the range 10.x.x.x or 192.169.x.x.
	741	You have to know your network prefix. Then the last figure
	742	may be anything you like.
	743
[945ccaa]	744	config GATEWAY
	745	string "Gateway"
	746	default "10.0.2.2"
[6990d80]	747	help
	748	Again, this default is for a qemu network stack. Usually, the
	749	gateway is the address of your firewall.
[945ccaa]	750	config PREFIX
	751	string "Subnet prefix"
	752	default "24"
[6990d80]	753	help
	754	Again, this default is for a qemu network stack, but is also
	755	the most used in private networks.
[945ccaa]	756	config BROADCAST
	757	string "Broadcast address"
	758	default "10.0.2.255"
	759	config DOMAIN
[6990d80]	760	string "Domain name (see help)"
	761	default "local"
	762	help
	763	Domain Name:
	764	Doamin names are registered, so if your computer is on a public
	765	network, you cannot use any name you'd like. On a public
	766	network, you should have been given a domain name by
	767	your corporation, institution, etc.
	768	If your network is really private, that is behind a firewall
	769	such as a box for connecting to an ISP, you can choose any
	770	domain you'd like. You can also opt for "local", see RFC 6762,
	771	or "something.test", see RFC 6761.
[945ccaa]	772	config DNS1
	773	string "Primary Name server"
	774	default "10.0.2.3"
	775	config DNS2
	776	string "Secondary Name server"
	777	default "8.8.8.8"
	778	endmenu # Network configuration
	779
	780	menu "Console configuration"
	781	config FONT
	782	string "Console font"
	783	default "lat0-16"
[3b43e17b]	784	help
	785	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	786	etc, must be done manually.
[945ccaa]	787	config KEYMAP
	788	string "Keymap name"
	789	default "us"
[3b43e17b]	790	config LOCAL
	791	boolean "Hardware clock is set to local time"
	792	default n
	793	help
	794	If the harware clock is set to local time, answer yes,
	795	If it is set to UTC, answer no
	796	config LOG_LEVEL
	797	string "Default log level (1-8)"
	798	default "4"
[f596dde]	799	depends on BOOK_LFS
[3b43e17b]	800	help
	801	This can be changed using dmesg. 1 means "no message",
	802	8 shows every message sent by the kernel, which is very
	803	noisy. The default at boot time is 7, which is quite
	804	noisy too.
[945ccaa]	805	endmenu # Console configuration
	806
	807	endmenu #--- System configuration
[a705708]	808
[e5d44f5]	809	menu "Advanced Features"
[e3ccc27]	810	depends on !BOOK_BLFS
[e5d44f5]	811
	812	config REPORT
	813	bool "Create SBU and disk usage report"
	814	default y
	815
[f5ecc28]	816	config SAVE_CH5
	817	bool "Save Chapter 5 work"
	818	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
	819	default n
	820	help
	821	Save the state of jhalfs at the end of chapter 5:
	822
	823	if you tick this item, the whole $LFS directory is
	824	saved when chapter 5 is finished. It'll be in an xz
	825	compressed tarball in the $LFS/jhalfs directory
	826
[f596dde]	827	#--- ICA
[e5d44f5]	828	config COMPARE
	829	bool "Run comparison analysis on final stage"
	830	default n
	831	help
	832	#-- Should an iterative comparison analysis be performed?
	833	#
[f596dde]	834	# Unless you are familiar with ICA, do not
[e5d44f5]	835	# select this option
	836	#
[f596dde]	837	# ICA is an analysis tool for comparing one
[e5d44f5]	838	# build to the next. Builds mays differ from one iteration
[f596dde]	839	# to another due to the build order and this tool try
[e5d44f5]	840	# to ferret out those differences by examining the stored
	841	# build logs and binary files.
	842	#
	843	# The scripts are well commented and can be found in ./extras/*
	844	#
	845
	846	config ITERATIONS
	847	int "Number of test runs (2,3,4,5)" if COMPARE
	848	depends on COMPARE
	849	range 2 5
	850	default 3
	851
	852	config RUN_ICA
[f596dde]	853	bool
	854	default y if COMPARE
[e5d44f5]	855
[f596dde]	856	#--- End ICA
[e5d44f5]	857
	858	#--- Optimizations
	859	config CONFIG_OPTIMIZE
	860	bool "Optimization and parallelization"
	861	default n
	862	help
	863	# Opens a menu for various optimization settings:
	864	# Actual optimization flags MUST be defined in ./optimize/*
	865	# before activating this option.
	866	#
	867	# WARNING: The use of build optimizations may lead to build issues.
	868	# If the system doesn't work as expected, please rebuild
	869	# without optimizations before asking for support.
	870	menu "Optimization settings"
	871	depends on CONFIG_OPTIMIZE
	872
	873	config N_PARALLEL
	874	int "Number of parallel `make' jobs"
	875	default 1
	876	help
	877	#-- The usual recommandation is (number of CPU cores)+1
	878	# Do not set for meaningful SBU calculations.
	879
	880	choice
[f596dde]	881	prompt "Optimization level"
[e5d44f5]	882	default OPT_1
	883	help
	884	#-- Optimization values are set in optimize/* files
	885
	886	config OPT_1
	887	bool "Final system only"
	888
	889	config OPT_2
	890	bool "Both temp tools and final system"
	891
	892	config OPT_3
	893	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
	894	endchoice
[84a3fda]	895
	896	config REALSBU
	897	bool "Build Binutls pass1 without optimization (Real SBU)"
	898	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD) && OPT_2
	899	default n
	900	help
	901	#-- Use -j1 in make invokation for Binutils pass1 to
	902	# get a valid SBU value.
	903
[854854e]	904	endmenu
[e5d44f5]	905	config OPTIMIZE
	906	int
	907	default "0" if !CONFIG_OPTIMIZE
	908	default "1" if OPT_1
	909	default "2" if OPT_2
	910	default "3" if OPT_3
[045b2dc]	911	endif
[84a3fda]	912
[e5d44f5]	913	#--- End Optimizations
[a705708]	914
[e5d44f5]	915	#-- Internal Settings
	916	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	917
[e5d44f5]	918	config SCRIPT_ROOT
	919	string "Scripts root"
	920	default "jhalfs"
[4da2512]	921
[e5d44f5]	922	config JHALFSDIR
	923	string "jhalfs directory"
	924	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	925
[e5d44f5]	926	config LOGDIRBASE
	927	string "Build logs directory basename"
	928	default "logs"
[93346ee]	929
[e5d44f5]	930	config LOGDIR
	931	string "Build logs directory"
	932	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	933
[e5d44f5]	934	config TESTLOGDIRBASE
	935	string "Test suites logs directory basename"
	936	default "test-logs"
[4da2512]	937
[e5d44f5]	938	config TESTLOGDIR
	939	string "Test suites logs directory"
	940	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	941
[e5d44f5]	942	config FILELOGDIRBASE
	943	string "Installed files logs directory basename"
	944	default "installed-files"
[93346ee]	945
[e5d44f5]	946	config FILELOGDIR
	947	string "Installed files logs directory"
	948	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	949
[e5d44f5]	950	config ICALOGDIR
	951	string "ICA logs directory"
	952	default "$LOGDIR/ICA"
[4da2512]	953
[e5d44f5]	954	config MKFILE
	955	string "Makefile"
	956	default "$JHALFSDIR/Makefile"
[4da2512]	957
[e5d44f5]	958	config XSL
	959	string "XSL stylesheet"
	960	default "$PROGNAME.xsl"
[4da2512]	961
[e5d44f5]	962	config PKG_LST
	963	string "Package contents list"
	964	default "unpacked"
[4da2512]	965
[e5d44f5]	966	#--- End Internal Settings
	967	endmenu
[4da2512]	968
[a705708]	969	#--- End Advanced Features
	970	endmenu
[7b6ecc5]	971
[a16f769]	972	config REBUILD_MAKEFILE
[06eddf4]	973	# depends on !BOOK_BLFS
[e5d44f5]	974	bool "Rebuild the Makefile (see help)"
	975	default n
	976	help
	977	#-- Rebuild the Makefile
	978	#
	979	# This option allows to rebuild the Makefile after
	980	# customizing the base system build scripts.
	981	#
	982	# See README.CUSTOM for more info about this feature.
[06eddf4]	983	# Note that you should do that after configuring a jhalfs
	984	# build, and only if you need changing the build scripts order
	985	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ e3f41e33

Download in other formats: