Context Navigation

source: Config.in@ 6990d80

ablfs-more legacy trunk

Last change on this file since 6990d80 was 6990d80, checked in by Pierre Labastie <pierre@…>, 7 years ago
Rmove reference to lfs.org, and try to document the different options for network settings
Property mode set to `100644`
File size: 39.9 KB

Line
1	menu "BOOK Settings"
2
3	#--- BOOK/script
4	choice
5	prompt "Use BOOK"
6	default BOOK_LFS
7	help
8	Select the book where build instructions are retrieved.
9
10	config BOOK_LFS
11	bool "Linux From Scratch System V"
12	help
13	Set up the tools to build LFS with Sys V init.
14
15	config BOOK_LFS_SYSD
16	bool "Linux From Scratch systemd"
17	help
18	Set up the tools to build LFS with systemd init.
19
20	config BOOK_CLFS
21	bool "Cross-Compiled Linux From Scratch"
22	help
23	Set up the tools to build CLFS.
24
25	config BOOK_CLFS2
26	bool "Cross-Compiled Linux From Scratch (Sysroot method)"
27	help
28	Set up the tools to build CLFS by the sysroot method.
29
30	config BOOK_CLFS3
31	bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
32	help
33	Set up the tools to build CLFS with tools for embedded systems.
34
35	config BOOK_BLFS
36	bool "Beyond Linux From Scratch (see help)"
37	help
38	if the (C)LFS system has already been built, install the tools
39	to build BLFS packages.
40	endchoice
41
42	choice
43	depends BOOK_BLFS
44	prompt "Init system"
45
46	config BLFS_SYSV
47	bool "BLFS Sys V"
48	help
49	Extract the Sys V flavour of the BLFS book
50
51	config BLFS_SYSD
52	bool "BLFS systemd"
53	help
54	Extract the systemd flavour of the BLFS book
55
56	endchoice
57
58	config INITSYS
59	string
60	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
61	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
62
63	config PROGNAME
64	string
65	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
66	default "clfs" if BOOK_CLFS
67	default "clfs2" if BOOK_CLFS2
68	default "clfs3" if BOOK_CLFS3
69
70	config RUN_ME
71	string
72	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_CLFS \|\| \
73	BOOK_CLFS2 \|\| BOOK_CLFS_3
74	default "./install-blfs-tools.sh auto" if BOOK_BLFS
75	#--- End BOOK/script
76
77	#--- Book version
78	choice
79	prompt "Release"
80	default relSVN if BOOK_LFS \|\| BOOK_LFS_SYSD \|\| BOOK_BLFS
81	default relGIT if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
82
83	config relSVN
84	bool "SVN"
85	depends on BOOK_LFS \|\| BOOK_BLFS \|\| BOOK_LFS_SYSD
86	help
87	Current development version as in trunk
88
89	config relGIT
90	bool "GIT"
91	depends on BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
92	help
93	Current development git master branch
94
95	config WORKING_COPY
96	bool "Working Copy"
97	help
98	A local working copy
99
100	config BRANCH
101	bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
102	help
103	A supported SVN/GIT branch or stable released book
104	endchoice
105
106	config BRANCH_ID
107	string "Branch (preceded by \"branch-\"), stable Version, or tag"
108	default "EDIT ME"
109	depends BRANCH
110	help
111	A list of valid branches and stable book IDs is available at
112	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
113
114	Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
115	YYY version.
116
117	config BOOK
118	string "Loc of working copy (mandatory)"
119	default "EDIT ME"
120	depends WORKING_COPY
121	help
122	The full path to a local copy of the book XML sources
123
124	#--- End BOOK version
125
126	#--- CLFS specific params
127	choice
128	prompt "Target architecture"
129	default ARCH_X86
130	depends BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
131	help
132	Choose the target system base architecture
133
134	config ARCH_X86
135	bool "x86"
136
137	config ARCH_MIPS
138	bool "mips" if !BOOK_CLFS2
139
140	config ARCH_PPC
141	bool "ppc" if BOOK_CLFS
142
143	config ARCH_SPARC
144	bool "sparc" if BOOK_CLFS
145
146	config ARCH_ALPHA
147	bool "alpha" if !BOOK_CLFS3
148
149	config ARCH_ARM
150	bool "arm" if !BOOK_CLFS
151
152	config ARCH_HPPA
153	bool "hppa" if BOOK_CLFS2
154	endchoice
155
156	choice
157	prompt "Hardware Platform"
158	depends BOOK_CLFS3 && ARCH_MIPS
159	default PLATFORM_GENERIC
160	help
161	Choose a destination platform
162	Platform specific files will be included
163
164	config PLATFORM_GENERIC
165	bool "Generic platform"
166
167	config PLATFORM_WRT
168	bool "WRT - MIPS based wireless router" if ARCH_MIPS
169	endchoice
170
171	choice
172	prompt "Library"
173	depends (BOOK_CLFS && !ARCH_ALPHA) \|\| (BOOK_CLFS3 && ARCH_MIPS)
174	default DATA_32
175	help
176	Choose the target system libraries type
177
178	config DATA_32
179	bool "32-bit"
180
181	config DATA_64
182	bool "64-bit"
183
184	config DATA_MULTI
185	bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
186	endchoice
187
188	choice
189	prompt "Processor type"
190	depends (BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 \|\| DATA_MULTI)) \|\| ARCH_MIPS \|\| ARCH_HPPA \|\| ARCH_ALPHA \|\| (ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)) \|\| (ARCH_ARM && BOOK_CLFS3))
191	help
192	Choose the target system processor
193
194	config PROC_i486
195	bool "486 Compatibles" if ARCH_X86
196
197	config PROC_i586
198	bool "Pentium, K6, 586 Compatibles" if ARCH_X86
199
200	config PROC_i686
201	bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
202
203	config PROC_mipsel
204	bool "MIPS Little Endian" if ARCH_MIPS
205
206	config PROC_mips
207	bool "MIPS Big Endian" if ARCH_MIPS
208
209	config PROC_unknown
210	bool "Unknown" if ARCH_HPPA \|\| ARCH_ALPHA
211
212	config PROC_hppa1
213	bool "PA 7000 Series" if ARCH_HPPA
214
215	config PROC_hppa2
216	bool "PA 8000 Series" if ARCH_HPPA
217
218	config PROC_EV5
219	bool "EV5 Series" if ARCH_ALPHA
220
221	config PROC_EV56
222	bool "EV56 Series" if ARCH_ALPHA
223
224	config PROC_PCA56
225	bool "PCA56 Series" if ARCH_ALPHA
226
227	config PROC_PCA57
228	bool "PCA57 Series" if ARCH_ALPHA
229
230	config PROC_EV6
231	bool "EV6 Series" if ARCH_ALPHA
232
233	config PROC_EV67
234	bool "EV67 Series" if ARCH_ALPHA
235
236	config PROC_EV68
237	bool "EV68 Series" if ARCH_ALPHA
238
239	config PROC_ARM
240	bool "Generic arm, little endian" if ARCH_ARM
241
242	config PROC_ARM5L
243	bool "Generic arm, version 5, little endian" if ARCH_ARM
244
245	config PROC_ARM5B
246	bool "Generic arm, version 5, big endian" if ARCH_ARM
247
248	config PROC_ULTRA1
249	bool "UtraSparc" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
250
251	config PROC_ULTRA2
252	bool "UtraSparc2" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
253
254	config PROC_ULTRA3
255	bool "UtraSparc3" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
256	endchoice
257
258	choice
259	prompt "MIPS 64 ABI"
260	depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
261	default ABI_64
262	help
263	Choose the target system ABI to use
264
265	config ABI_32
266	bool "o32"
267
268	config ABI_N32
269	bool "n32"
270
271	config ABI_64
272	bool "n64"
273	endchoice
274
275	config TARGET
276	string
277	default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
278	default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
279	default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
280
281	default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
282	default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
283	default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
284
285	default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 \|\| DATA_MULTI)
286
287	default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
288	default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
289	default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 \|\| DATA_MULTI)
290	default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 \|\| DATA_MULTI)
291
292	default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
293	default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
294	default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
295	default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
296
297	default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
298	default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI \|\| DATA_64)
299
300	default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
301	default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 \|\| DATA_MULTI)
302
303	default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
304	default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
305	default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
306
307	default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
308
309	default "arm-unknown-linux-uclibc" if PROC_ARM
310	default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
311	default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
312
313	default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
314	default "alphaev5-unknown-linux-gnu" if PROC_EV5
315	default "alphaev56-unknown-linux-gnu" if PROC_EV56
316	default "alphapca56-unknown-linux-gnu" if PROC_PCA56
317	default "alphapca57-unknown-linux-gnu" if PROC_PCA57
318	default "alphaev6-unknown-linux-gnu" if PROC_EV6
319	default "alphaev67-unknown-linux-gnu" if PROC_EV67
320	default "alphaev68-unknown-linux-gnu" if PROC_EV68
321
322	config TARGET32
323	string
324	depends DATA_MULTI
325	default "i686-pc-linux-gnu" if ARCH_X86
326	default "mipsel-unknown-linux-gnu" if PROC_mipsel
327	default "mips-unknown-linux-gnu" if PROC_mips
328	default "sparc-unknown-linux-gnu" if ARCH_SPARC
329	default "powerpc-unknown-linux-gnu" if ARCH_PPC
330
331	config PLATFORM
332	string
333	default "GENERIC" if (!BOOK_CLFS3) \|\| PLATFORM_GENERIC
334	default "WRT - Wireless Router" if PLATFORM_WRT
335
336	config SPARC64_PROC
337	string
338	default "none" if !(ARCH_SPARC && (DATA_64 \|\| DATA_MULTI))
339	default "1" if PROC_ULTRA1
340	default "2" if PROC_ULTRA2
341	default "3" if PROC_ULTRA3
342
343	config ARCH
344	string
345	default "x86" if ARCH_X86 && (DATA_32 \|\| BOOK_CLFS2 \|\| BOOK_CLFS3)
346	default "x86_64" if ARCH_X86 && DATA_MULTI
347	default "x86_64-64" if ARCH_X86 && DATA_64
348
349	default "wrt" if PLATFORM_WRT && BOOK_CLFS3
350
351	default "mips" if ARCH_MIPS && (DATA_32 \|\| BOOK_CLFS3)
352	default "mips64" if ARCH_MIPS && DATA_MULTI
353	default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
354
355
356	default "ppc" if ARCH_PPC && DATA_32
357	default "ppc64" if ARCH_PPC && DATA_MULTI
358	default "ppc64-64" if ARCH_PPC && DATA_64
359
360	default "sparc" if ARCH_SPARC && DATA_32
361	default "sparc64" if ARCH_SPARC && DATA_MULTI
362	default "sparc64-64" if ARCH_SPARC && DATA_64
363
364	default "alpha" if ARCH_ALPHA
365	default "arm" if ARCH_ARM
366	default "hppa" if ARCH_HPPA
367
368	config MIPS_LEVEL
369	string
370	depends BOOK_CLFS3 && ARCH_MIPS
371	default "1" if DATA_32
372	default "3" if DATA_64
373
374	config ABI
375	string
376	depends BOOK_CLFS3
377	default "-m32" if ARCH_X86 \|\| ARCH_ARM
378	# default "-m64" if NO USED YET IN THE BOOK
379	default "-mabi=32" if ABI_32 \|\| (ARCH_MIPS && DATA_32)
380	default "-mabi=n32" if ABI_N32
381	default "-mabi=64" if ABI_64
382
383	config ENDIAN
384	string
385	depends BOOK_CLFS3 && (ARCH_MIPS \|\| ARCH_ARM)
386	default "little" if PROC_mipsel \|\| PROC_ARM \|\| PROC_ARM5L
387	default "big" if PROC_mips \|\| PROC_ARM5B
388
389	choice
390	prompt "Build method"
391	depends BOOK_CLFS
392	help
393	What build method should be used: a chroot jail or minimal boot
394	system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
395	a full explanation.
396
397	config BUILD_CHROOT
398	bool "chroot"
399
400	config BUILD_BOOT
401	bool "boot"
402	endchoice
403
404	config METHOD
405	string
406	default "chroot" if BUILD_CHROOT
407	default "boot" if BUILD_BOOT
408
409	config BOOT_CONFIG
410	string "BOOT kernel config file (mandatory)"
411	default "*EDIT ME*"
412	depends on BUILD_BOOT
413	help
414	If METHOD=boot, location of boot-kernel config file
415	The config file will be copied to ${BUILD_DIR}/sources
416	and renamed 'bootkernel-config'
417	NOTE: this setting is required
418	#--- End CLFS specific params
419
420	#--- blfs-tool Support
421	config BLFS_TOOL
422	bool "Add blfs-tool support"
423	default n
424	depends on !BOOK_CLFS3 && !BOOK_BLFS
425	help
426	Activating this option will install additional packages needed
427	to use blfs tools after booting the new system.
428	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
429	(see below).
430	After booting the new xLFS system, but before using the blfs tools,
431	you should create a user account, move the /blfs_root directory
432	to that user's home, and change its ownership to that of the user.
433	Also, be sure to give the user read and write access on the
434	$TRACKING_DIR directory and the files that it contains.
435	Don't forget to configure sudo properly on the new system.
436
437	config DUMMY # Avoid indenting the items below
438	bool
439
440	if BLFS_TOOL
441	menu "blfs-tool dependencies"
442
443	config DEP_LIBXML
444	bool "libxml2 (required)"
445	default y
446
447	config DEP_LIBXSLT
448	bool "libxslt (required)"
449	default y
450
451	config DEP_DBXML
452	bool "DocBook XML DTD (required)"
453	default y
454
455	config DEP_LYNX
456	bool "lynx (optional, for reading the generated book)"
457	default y
458
459	config DEP_SUDO
460	bool "sudo (recommended)"
461	default y
462
463	config DEP_WGET
464	bool "wget (recommended)"
465	default y
466
467	config DEP_GPM
468	bool "GPM (optional, see help)"
469	default n
470	help
471	if you install gpm, it will be started
472	automatically on boot. You'll have to edit
473	/etc/sysconfig/mouse for your system
474
475	config DEP_SVN
476	bool "SVN client (optional, see help)"
477	default n
478	help
479	Subversion is needed for updating the book
480	sources. If you want ssl support, select
481	OPENSSL below.
482
483	config DEP_OPENSSL
484	bool "OPENSSL (optional, see help)"
485	default n
486	help
487	selecting OPENSSL here allows to build
488	subversion with ssl support, avoiding a later
489	recompilation
490
491	config DEP_PYTHON
492	bool "PYTHON 2 (optional, see help)"
493	default n
494	help
495	selecting PYTHON 2 here allows to build
496	the libxml2 and libxslt python modules,
497	avoiding a later recompilation
498
499	endmenu
500
501	choice
502	prompt "BLFS Release"
503	default BLFS_SVN
504
505	config BLFS_SVN
506	bool "BLFS SVN"
507	help
508	Current development version as in trunk
509
510	config BLFS_WORKING_COPY
511	bool "BLFS working copy"
512	help
513	A local working copy of the BLFS book.
514
515	config BLFS_BRANCH
516	bool "BLFS Branch or stable book"
517	help
518	A supported SVN branch or stable book release
519	endchoice
520
521	config BLFS_WC_LOCATION
522	string "Location of the local BLFS working copy (mandatory)"
523	default "EDIT ME"
524	depends on BLFS_WORKING_COPY
525	help
526	Full path to the BLFS book working copy"
527
528	config BLFS_BRANCH_ID
529	string "BLFS Book Version (mandatory)"
530	default "EDIT ME"
531	depends on BLFS_BRANCH
532	help
533	A list of valid branches and stable book IDs is available at
534	http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
535	endif
536	#--- End blfs-tool Support
537
538	#--- BLFS params (Used for installing the tools, either after a jhalfs run
539	# or directly)
540	config BLFS_ROOT
541	string "Root of the tools directory (see help)"
542	default "/blfs_root"
543	depends on BLFS_TOOL \|\| BOOK_BLFS
544	help
545	Path to the directory where all required files and scripts
546	will be stored.
547
548	This path must begin with a slash, and:
549	- is relative to the user's HOME directory when installing the
550	blfs tools on an already existing LFS system.
551	- is relative to the root of the build directory (`/' in chroot)
552	when adding the tools after a jhalfs run
553
554	CAUTION: this directory will be removed if it already exists.
555
556	config BLFS_XML
557	string "BLFS sources directory (internal parameter)"
558	default "blfs-xml"
559	depends BLFS_TOOL \|\| BOOK_BLFS
560	help
561	The directory name under $BLFS_ROOT where the BLFS
562	book sources will be copied or checked out. Do not change that
563	unless you know what you are doing...
564	# End of BLFS parameters
565
566	#--- Custom Tools support
567	config CUSTOM_TOOLS
568	depends !BOOK_BLFS
569	bool "Add custom tools support"
570	default n
571	help
572	Activating this option additional packages you create
573	will be installed after finished the xLFS system build.
574	#--- End Custom Tools support
575
576	#--- This direcotry is needed for blfs tools installation and custom tools
577	# As well.
578	config TRACKING_DIR
579	string "Installed packages database directory"
580	default "/var/lib/jhalfs/BLFS"
581	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
582	help
583	Full path to the directory where the database of
584	installed packages will be created.
585
586	If the blfs tools are installed on a running xLFS system,
587	the user must have enough privileges to create this directory.
588	It may be necessary to create the /var/lib/jhalfs directory as
589	root, and make it writable by the user before running this tool.
590
591	If you are installing the blfs tools as part of an xLFS build
592	and/or using the customized scripts feature, you will
593	need to fix this directory's permissions after booting
594	the new system.
595
596	Note that the user that will build the packages must
597	have read and write access to this directory.
598
599	#--- End BOOK Settings
600	endmenu
601
602	menu "General Settings"
603	depends !BOOK_BLFS
604
605	#--- Set User Account
606	config CONFIG_USER
607	bool "Change the default user/group and homedir for this build"
608	default n
609	help #-- Unprivileged user and group name
610	# If you do not have the privilege to create/delete
611	# users and groups you can specify your own
612	# user ID for the build
613	#
614	# default values for each book
615	# LFS lfs
616	# CLFS* clfs
617	# HLFS hlfs
618	#
619	# Also, if your host places users' home dirs into a
620	# directory other than /home you can specify it here.
621
622	config DEF_USER
623	string
624	default "lfs" if BOOK_LFS \|\| BOOK_LFS_SYSD
625	default "clfs" if BOOK_CLFS \|\| BOOK_CLFS2 \|\| BOOK_CLFS3
626	default "hlfs" if BOOK_HLFS
627
628	config SET_USER
629	string "User account"
630	depends CONFIG_USER
631	default DEF_USER
632
633	config CONFIG_GROUP
634	bool "Set Group?"
635	default n
636	depends CONFIG_USER
637
638	config SET_GROUP
639	string "GROUP account"
640	depends CONFIG_GROUP
641	default DEF_USER
642
643	config CONFIG_HOME
644	bool "Set home dir?"
645	default n
646	depends CONFIG_USER
647
648	config SET_HOME
649	string "Path to the directory under which the user's home directory will be created"
650	depends CONFIG_HOME
651	default "/home"
652
653	config LUSER
654	string
655	default DEF_USER if !CONFIG_USER
656	default SET_USER if CONFIG_USER
657
658	config LGROUP
659	string
660	default LUSER if !CONFIG_GROUP
661	default SET_GROUP if CONFIG_GROUP
662
663	config LHOME
664	string
665	default "/home" if !CONFIG_HOME
666	default SET_HOME if CONFIG_HOME
667	#--- End Set User Account
668
669	config BUILDDIR
670	string "Build Directory"
671	default "/mnt/build_dir"
672	help
673	#-- The directory where the created system will be located.
674	# NOTE: A working directory named jhalfs will be created
675	# here, so ensure this does not conflict with the jhalfs
676	# source directory.
677
678	config GETPKG
679	bool "Retrieve source files"
680	default n
681	help
682	#-- Download all packages and patches required by the selected book
683	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
684	# first and if necessary retrieves them from the 'net.
685	# Files will be transferred to $BUILDDIR/sources.
686
687	config SRC_ARCHIVE
688	string "Package Archive Directory"
689	default "$SRC_ARCHIVE"
690	depends GETPKG
691	help
692	#-- A local archive for packages/files (not $BUILDDIR/sources)
693	# Any missing file will be downloaded and archived here,
694	# if the user has the right privileges.
695
696	config RETRYSRCDOWNLOAD
697	bool "Retry on 'connection refused' failure"
698	default n
699	depends GETPKG
700	help
701	#-- Attempt to download a source package again if it fails
702	# with a 'connection refused' error. This can happen on
703	# servers that are overloaded.
704
705	config RETRYDOWNLOADCNT
706	int "Number of retry attempts on download failures"
707	default 20
708	depends GETPKG
709	help
710	#-- Number of times to retry a failed download.
711
712	config DOWNLOADTIMEOUT
713	int "Download timeout (in seconds)"
714	default 30
715	depends GETPKG
716	help
717	#-- Number of seconds to wait for a download to start before
718	# timing out.
719
720	config SERVER
721	string "FTP mirror"
722	default "http://ftp.osuosl.org"
723	depends GETPKG
724	help
725	#-- FTP mirror to download packages and patches if not found
726	# in $SRC_ARCHIVE
727	# As a last resort, the files will downloaded from upstream,
728	# if possible.
729
730	config RUNMAKE
731	bool "Run the makefile"
732	default n
733	help
734	#-- Automatically run the makefile once it has been created
735
736	config CLEAN
737	bool "Rebuild files"
738	default n
739	help
740	#-- Clean the build directory before performing any other task.
741	# The directory is cleaned only if it was populated by a
742	# previous JHALFS run.
743
744	#--- End General Settings
745	endmenu
746
747	menu "Build Settings"
748	depends !BOOK_BLFS
749
750	#--- Test Suites
751	config CONFIG_TESTS
752	bool "Run testsuites"
753	depends !BOOK_CLFS2 && !BOOK_CLFS3
754	default y
755	help
756	#-- Run test suites
757	#
758	# You will have to select between:
759	#
760	# - Only critical final system testsuites
761	# - All final system testsuites
762	# - Both temporary tools and final system testsuites
763	#
764	# HLFS and CLFS have no testsuites available in the
765	# temporary tools phase
766	# You will be prompted also about the "flavour" of the
767	# testsuites run:
768	#
769	# - Don't stop on test suite failures
770	# - Abort the build at the first test suite failure
771	#
772
773	menu "Test settings"
774	depends CONFIG_TESTS
775	choice
776	prompt "Tests level"
777	default TST_1
778
779	config TST_1
780	bool "Only final system critical testsuites"
781	help
782	#-- Critical tests:
783	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
784	# testsuites for final system
785
786	config TST_2
787	bool "All final system testsuites"
788
789	config TST_3
790	bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
791	help
792	#-- All tests:
793	# Runs all the testsuites for both temporary tools
794	# and final system
795	endchoice
796
797	choice
798	prompt "Flavour"
799
800	config NO_BOMB
801	bool "Don't stop on test failures"
802
803	config BOMB
804	bool "Abort the build on the first test failure"
805	endchoice
806
807	config TEST
808	int
809	default "0" if !CONFIG_TESTS
810	default "1" if TST_1
811	default "2" if TST_2
812	default "3" if TST_3
813
814	config BOMB_TEST
815	bool
816	default n if NO_BOMB
817	default y if BOMB
818
819	#--- End Test Suites
820	endmenu # test settings
821
822	#--- Package Management
823	config PKGMNGT
824	bool "Package management"
825	depends BOOK_LFS \|\| BOOK_LFS_SYSD
826	default n
827	help
828	#-- Use package management
829	#
830	# If set, you'll have to choose between
831	# two package management styles:
832	# - Build and install:
833	# the packages in the final phase are built
834	# in a separate directory, PKG_DEST.
835	# You should provide a bash function for
836	# packaing and installing the package.
837	# - Preload a library before install:
838	# Run the install instructions inside a
839	# wrapper command, which monitors the
840	# installed files.
841	#
842	# Also, you have to provide the instructions
843	# to build the package manager during the
844	# temporary tools phase, in the form of a
845	# sect1 of the book identical to a package
846	# sect1. See README.PACKAGE_MANAGEMENT
847	#
848	# For now, this only works with LFS
849	choice
850	depends PKGMNGT
851	prompt "Package management style"
852	default PKG_PACK
853
854	config PKG_PACK
855	bool "Build and pack (pacman or dpkg style)"
856
857	config LIB_LOAD
858	bool "Preload a library before installing (porg style)"
859	endchoice
860
861	config WRAP_INSTALL
862	bool
863	default y if LIB_LOAD
864	default n if PKG_PACK
865	#--- End package management
866
867	#--- Installed files logs
868	config INSTALL_LOG
869	bool "Create a log of installed files for each package"
870	default n
871	help
872	#-- Select this if you want to create logs of the files
873	# installed by each package on the final system.
874
875	#--- End Installed files logs
876
877	config STRIP
878	bool "Strip Installed Binaries/Libraries"
879	default n
880	depends on !BOOK_CLFS3
881
882	config NO_PROGRESS_BAR
883	bool "DO NOT use/display progress_bar "
884	default n
885	help
886	#-- Do not use the progress bar routine. On slower machines
887	# this function consumes precious CPU cycles.
888
889	#--- End Build Settings
890	endmenu
891
892	menu "System configuration"
893	depends !BOOK_BLFS
894
895	#--- FSTAB
896	config HAVE_FSTAB
897	bool "Use a custom fstab file"
898	default n
899	help
900	#-- Select this if you have an fstab file with entries
901	# for the target system
902
903	config FSTAB
904	string "Fstab file (optional)"
905	default "*EDIT ME*"
906	depends on HAVE_FSTAB
907	help
908	#-- The location of fstab file (if empty, a template is created)
909	#--- End FSTAB
910
911	#--- Kernel
912	config CONFIG_BUILD_KERNEL
913	bool "Build the kernel"
914	default n
915	help
916	#-- Select this option if you wish to build the kernel.
917	#
918	# You will be prompted for the full path to the .config
919	# file. It will be copied to the 'sources' directory and
920	# renamed kernel-config
921
922	config CONFIG
923	string "Kernel config file"
924	default "*EDIT ME*"
925	depends on CONFIG_BUILD_KERNEL
926	help
927	#-- Fully qualified path to a kernel config file
928	# The config file will be copied to ${BUILD_DIR}/sources
929	# and renamed 'kernel-config'
930	#--- End Kernel
931
932	config VIMLANG
933	bool "Install vim-lang package"
934	default n
935	depends on !BOOK_HLFS && !BOOK_CLFS3
936	help
937	#-- Install the optional vim-lang package
938	# NOTE: This option is obsolete with the 7.3 release of Vim
939	# which is included in all recent releases of LFS.
940
941	config TIMEZONE
942	string "TimeZone"
943	default "GMT"
944	help
945	#-- The timezone as output by tzselect
946	# This will be copied to /etc/localtime
947
948	config LANG
949	string "Language"
950	default "$LANG"
951	help
952	#-- LANG variable set in /etc/profile
953	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
954	# for values (or the file localedata/SUPPORTED in glibc tarball)
955
956	config FULL_LOCALE
957	bool "Install the full set of locales"
958	default n
959	help
960	#-- If set to y, the full set of supported locales
961	# will be installed. Otherwise, only the minimal set
962	# necessary for the tests will be installed,
963	# together with the locale associated with the
964	# LANG you have chosen, if not in the minimal set.
965
966	#--- Groff page
967	choice
968	prompt "Groff page size"
969	default PAGE_LETTER
970	help
971	#-- Page definition for groff: letter or A4
972
973	config PAGE_LETTER
974	bool "letter"
975
976	config PAGE_A4
977	bool "A4"
978	endchoice
979
980	config PAGE
981	string
982	default "letter" if PAGE_LETTER
983	default "A4" if PAGE_A4
984	#--- End Groff page
985
986	config HOSTNAME
987	string "Hostname (see help)"
988	default "EDITME"
989	help
990	If you are on a public network, use the hostname given to you by
991	your institution, or corporation, etc. If your network is private,
992	that is, behind a firewall such as a box to connect to your ISP,
993	you can choose anything you'd like. Combined with the domain name
994	"local", you have the possibility to access your computer by name
995	instead of address on the private network (see RFC 6762 and
996	https://www.howtogeek.com/167190/).
997
998	menu "Network configuration"
999	config INTERFACE
1000	string "netword card name"
1001	default "eth0"
1002	help
1003	eth0 is used in most cases. Virtual insterfaces may get other
1004	names (for example enp0s3 for the default network stack in qemu).
1005	Systemd may also rename network interfaces according to their
1006	bus addresses.
1007	config IP_ADDR
1008	string "Static IP address"
1009	default "10.0.2.9"
1010	help
1011	The default here is for a virtual interface in qemu. Private
1012	networks have addresses in the range 10.x.x.x or 192.169.x.x.
1013	You have to know your network prefix. Then the last figure
1014	may be anything you like.
1015
1016	config GATEWAY
1017	string "Gateway"
1018	default "10.0.2.2"
1019	help
1020	Again, this default is for a qemu network stack. Usually, the
1021	gateway is the address of your firewall.
1022	config PREFIX
1023	string "Subnet prefix"
1024	default "24"
1025	help
1026	Again, this default is for a qemu network stack, but is also
1027	the most used in private networks.
1028	config BROADCAST
1029	string "Broadcast address"
1030	default "10.0.2.255"
1031	config DOMAIN
1032	string "Domain name (see help)"
1033	default "local"
1034	help
1035	Domain Name:
1036	Doamin names are registered, so if your computer is on a public
1037	network, you cannot use any name you'd like. On a public
1038	network, you should have been given a domain name by
1039	your corporation, institution, etc.
1040	If your network is really private, that is behind a firewall
1041	such as a box for connecting to an ISP, you can choose any
1042	domain you'd like. You can also opt for "local", see RFC 6762,
1043	or "something.test", see RFC 6761.
1044	config DNS1
1045	string "Primary Name server"
1046	default "10.0.2.3"
1047	config DNS2
1048	string "Secondary Name server"
1049	default "8.8.8.8"
1050	endmenu # Network configuration
1051
1052	menu "Console configuration"
1053	config FONT
1054	string "Console font"
1055	default "lat0-16"
1056	config FONTMAP
1057	string "Font map (-m option to setfont)"
1058	default "8859-1"
1059	config UNICODE
1060	bool "Unicode mode"
1061	default y
1062	config KEYMAP
1063	string "Keymap name"
1064	default "us"
1065	endmenu # Console configuration
1066
1067	endmenu #--- System configuration
1068
1069	menu "Advanced Features"
1070	depends !BOOK_BLFS
1071
1072	config REPORT
1073	depends !PKGMNGT
1074	bool "Create SBU and disk usage report"
1075	default y
1076
1077	#--- ICA/farce
1078	config COMPARE
1079	bool "Run comparison analysis on final stage"
1080	depends !BOOK_CLFS2 && !BOOK_CLFS3
1081	default n
1082	help
1083	#-- Should an iterative comparison analysis be performed?
1084	#
1085	# Unless you are familiar with ICA and/or FARCE do not
1086	# select this option
1087	#
1088	# ICA and FARCE are analysis tools for comparing one
1089	# build to the next. Builds mays differ from one iteration
1090	# to another due to the build order and these tools try
1091	# to ferret out those differences by examining the stored
1092	# build logs and binary files.
1093	#
1094	# The scripts are well commented and can be found in ./extras/*
1095	#
1096
1097	config ITERATIONS
1098	int "Number of test runs (2,3,4,5)" if COMPARE
1099	depends on COMPARE
1100	range 2 5
1101	default 3
1102
1103	config RUN_ICA
1104	bool "ICA testing"
1105	depends on COMPARE
1106	default y
1107	help
1108	#-- Run ICA testing
1109
1110	config RUN_FARCE
1111	bool "farce testing"
1112	depends on COMPARE
1113	default n
1114	help
1115	#-- Run farce testing
1116	#--- End ICA/farce
1117
1118	#--- Optimizations
1119	if !BOOK_CLFS2 && !BOOK_CLFS3
1120	config CONFIG_OPTIMIZE
1121	bool "Optimization and parallelization"
1122	default n
1123	help
1124	# Opens a menu for various optimization settings:
1125	# Actual optimization flags MUST be defined in ./optimize/*
1126	# before activating this option.
1127	#
1128	# WARNING: The use of build optimizations may lead to build issues.
1129	# If the system doesn't work as expected, please rebuild
1130	# without optimizations before asking for support.
1131	menu "Optimization settings"
1132	depends on CONFIG_OPTIMIZE
1133
1134	config N_PARALLEL
1135	int "Number of parallel `make' jobs"
1136	default 1
1137	help
1138	#-- The usual recommandation is (number of CPU cores)+1
1139	# Do not set for meaningful SBU calculations.
1140
1141	choice
1142	prompt "Optimization level "
1143	default OPT_1
1144	help
1145	#-- Optimization values are set in optimize/* files
1146
1147	config OPT_1
1148	bool "Final system only"
1149
1150	config OPT_2
1151	bool "Both temp tools and final system"
1152
1153	config OPT_3
1154	bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
1155	endchoice
1156	endmenu
1157	config OPTIMIZE
1158	int
1159	default "0" if !CONFIG_OPTIMIZE
1160	default "1" if OPT_1
1161	default "2" if OPT_2
1162	default "3" if OPT_3
1163	endif
1164	#--- End Optimizations
1165
1166	#-- Internal Settings
1167	menu "Internal Settings (WARNING: for jhalfs developers only)"
1168
1169	config SCRIPT_ROOT
1170	string "Scripts root"
1171	default "jhalfs"
1172
1173	config JHALFSDIR
1174	string "jhalfs directory"
1175	default "$BUILDDIR/$SCRIPT_ROOT"
1176
1177	config LOGDIRBASE
1178	string "Build logs directory basename"
1179	default "logs"
1180
1181	config LOGDIR
1182	string "Build logs directory"
1183	default "$JHALFSDIR/$LOGDIRBASE"
1184
1185	config TESTLOGDIRBASE
1186	string "Test suites logs directory basename"
1187	default "test-logs"
1188
1189	config TESTLOGDIR
1190	string "Test suites logs directory"
1191	default "$JHALFSDIR/$TESTLOGDIRBASE"
1192
1193	config FILELOGDIRBASE
1194	string "Installed files logs directory basename"
1195	default "installed-files"
1196
1197	config FILELOGDIR
1198	string "Installed files logs directory"
1199	default "$JHALFSDIR/$FILELOGDIRBASE"
1200
1201	config ICALOGDIR
1202	string "ICA logs directory"
1203	default "$LOGDIR/ICA"
1204
1205	config FARCELOGDIR
1206	string "farce logs directory"
1207	default "$LOGDIR/farce"
1208
1209	config MKFILE
1210	string "Makefile"
1211	default "$JHALFSDIR/Makefile"
1212
1213	config XSL
1214	string "XSL stylesheet"
1215	default "$PROGNAME.xsl"
1216
1217	config PKG_LST
1218	string "Package contents list"
1219	default "unpacked"
1220
1221	#--- End Internal Settings
1222	endmenu
1223
1224	#--- End Advanced Features
1225	endmenu
1226
1227	config REBUILD_MAKEFILE
1228	depends !BOOK_BLFS
1229	bool "Rebuild the Makefile (see help)"
1230	default n
1231	help
1232	#-- Rebuild the Makefile
1233	#
1234	# This option allows to rebuild the Makefile after
1235	# customizing the base system build scripts.
1236	#
1237	# See README.CUSTOM for more info about this feature.
1238

Note: See TracBrowser for help on using the repository browser.

Download in other formats: