source: Config.in@ 70ea617

2.4 ablfs-more legacy trunk
Last change on this file since 70ea617 was 70ea617, checked in by Pierre Labastie <pierre@…>, 8 years ago

Make SBU and size computations incompatible with package management, since
the figures are wrong when package management is on (see #1694)
  • Property mode set to 100644
File size: 35.6 KB
Line 
1menu "BOOK Settings"
2
3 #--- BOOK/script
4 choice
5 prompt "Use BOOK"
6 default BOOK_LFS
7 help
8 Select the book where build instructions are retrieved.
9
10 config BOOK_LFS
11 bool "Linux From Scratch System V"
12 help
13 Set up the tools to build LFS with Sys V init.
14
15 config BOOK_LFS_SYSD
16 bool "Linux From Scratch systemd"
17 help
18 Set up the tools to build LFS with systemd init.
19
20 config BOOK_CLFS
21 bool "Cross-Compiled Linux From Scratch"
22 help
23 Set up the tools to build CLFS.
24
25 config BOOK_CLFS2
26 bool "Cross-Compiled Linux From Scratch (Sysroot method)"
27 help
28 Set up the tools to build CLFS by the sysroot method.
29
30 config BOOK_CLFS3
31 bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
32 help
33 Set up the tools to build CLFS with tools for embedded systems.
34
35 config BOOK_BLFS
36 bool "Beyond Linux From Scratch (see help)"
37 help
38 if the (C)LFS system has already been built, install the tools
39 to build BLFS packages.
40 endchoice
41
42 choice
43 depends BOOK_BLFS
44 prompt "Init system"
45
46 config BLFS_SYSV
47 bool "BLFS Sys V"
48 help
49 Extract the Sys V flavour of the BLFS book
50
51 config BLFS_SYSD
52 bool "BLFS systemd"
53 help
54 Extract the systemd flavour of the BLFS book
55
56 endchoice
57
58 config INITSYS
59 string
60 default "sysv" if BOOK_LFS || BLFS_SYSV
61 default "systemd" if BOOK_LFS_SYSD || BLFS_SYSD
62
63 config PROGNAME
64 string
65 default "lfs" if BOOK_LFS || BOOK_LFS_SYSD
66 default "clfs" if BOOK_CLFS
67 default "clfs2" if BOOK_CLFS2
68 default "clfs3" if BOOK_CLFS3
69
70 config RUN_ME
71 string
72 default "./jhalfs run" if BOOK_LFS || BOOK_LFS_SYSD || BOOK_CLFS || \
73 BOOK_CLFS2 || BOOK_CLFS_3
74 default "./install-blfs-tools.sh auto" if BOOK_BLFS
75 #--- End BOOK/script
76
77 #--- Book version
78 choice
79 prompt "Release"
80 default relSVN if BOOK_LFS || BOOK_LFS_SYSD || BOOK_BLFS
81 default relGIT if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
82
83 config relSVN
84 bool "SVN"
85 depends on BOOK_LFS || BOOK_BLFS || BOOK_LFS_SYSD
86 help
87 Current development version as in trunk
88
89 config relGIT
90 bool "GIT"
91 depends on BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
92 help
93 Current development git master branch
94
95 config WORKING_COPY
96 bool "Working Copy"
97 help
98 A local working copy
99
100 config BRANCH
101 bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
102 help
103 A supported SVN/GIT branch or stable released book
104 endchoice
105
106 config BRANCH_ID
107 string "Branch (preceded by \"branch-\"), stable Version, or tag"
108 default "**EDIT ME**"
109 depends BRANCH
110 help
111 A list of valid branches and stable book IDs is available at
112 http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
113
114 Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
115 YYY version.
116
117 config BOOK
118 string "Loc of working copy (mandatory)"
119 default "**EDIT ME**"
120 depends WORKING_COPY
121 help
122 The full path to a local copy of the book XML sources
123
124 #--- End BOOK version
125
126 #--- CLFS specific params
127 choice
128 prompt "Target architecture"
129 default ARCH_X86
130 depends BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
131 help
132 Choose the target system base architecture
133
134 config ARCH_X86
135 bool "x86"
136
137 config ARCH_MIPS
138 bool "mips" if !BOOK_CLFS2
139
140 config ARCH_PPC
141 bool "ppc" if BOOK_CLFS
142
143 config ARCH_SPARC
144 bool "sparc" if BOOK_CLFS
145
146 config ARCH_ALPHA
147 bool "alpha" if !BOOK_CLFS3
148
149 config ARCH_ARM
150 bool "arm" if !BOOK_CLFS
151
152 config ARCH_HPPA
153 bool "hppa" if BOOK_CLFS2
154 endchoice
155
156 choice
157 prompt "Hardware Platform"
158 depends BOOK_CLFS3 && ARCH_MIPS
159 default PLATFORM_GENERIC
160 help
161 Choose a destination platform
162 Platform specific files will be included
163
164 config PLATFORM_GENERIC
165 bool "Generic platform"
166
167 config PLATFORM_WRT
168 bool "WRT - MIPS based wireless router" if ARCH_MIPS
169 endchoice
170
171 choice
172 prompt "Library"
173 depends (BOOK_CLFS && !ARCH_ALPHA) || (BOOK_CLFS3 && ARCH_MIPS)
174 default DATA_32
175 help
176 Choose the target system libraries type
177
178 config DATA_32
179 bool "32-bit"
180
181 config DATA_64
182 bool "64-bit"
183
184 config DATA_MULTI
185 bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
186 endchoice
187
188 choice
189 prompt "Processor type"
190 depends (BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 || DATA_MULTI)) || ARCH_MIPS || ARCH_HPPA || ARCH_ALPHA || (ARCH_SPARC && (DATA_64 || DATA_MULTI)) || (ARCH_ARM && BOOK_CLFS3))
191 help
192 Choose the target system processor
193
194 config PROC_i486
195 bool "486 Compatibles" if ARCH_X86
196
197 config PROC_i586
198 bool "Pentium, K6, 586 Compatibles" if ARCH_X86
199
200 config PROC_i686
201 bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
202
203 config PROC_mipsel
204 bool "MIPS Little Endian" if ARCH_MIPS
205
206 config PROC_mips
207 bool "MIPS Big Endian" if ARCH_MIPS
208
209 config PROC_unknown
210 bool "Unknown" if ARCH_HPPA || ARCH_ALPHA
211
212 config PROC_hppa1
213 bool "PA 7000 Series" if ARCH_HPPA
214
215 config PROC_hppa2
216 bool "PA 8000 Series" if ARCH_HPPA
217
218 config PROC_EV5
219 bool "EV5 Series" if ARCH_ALPHA
220
221 config PROC_EV56
222 bool "EV56 Series" if ARCH_ALPHA
223
224 config PROC_PCA56
225 bool "PCA56 Series" if ARCH_ALPHA
226
227 config PROC_PCA57
228 bool "PCA57 Series" if ARCH_ALPHA
229
230 config PROC_EV6
231 bool "EV6 Series" if ARCH_ALPHA
232
233 config PROC_EV67
234 bool "EV67 Series" if ARCH_ALPHA
235
236 config PROC_EV68
237 bool "EV68 Series" if ARCH_ALPHA
238
239 config PROC_ARM
240 bool "Generic arm, little endian" if ARCH_ARM
241
242 config PROC_ARM5L
243 bool "Generic arm, version 5, little endian" if ARCH_ARM
244
245 config PROC_ARM5B
246 bool "Generic arm, version 5, big endian" if ARCH_ARM
247
248 config PROC_ULTRA1
249 bool "UtraSparc" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
250
251 config PROC_ULTRA2
252 bool "UtraSparc2" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
253
254 config PROC_ULTRA3
255 bool "UtraSparc3" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
256 endchoice
257
258 choice
259 prompt "MIPS 64 ABI"
260 depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
261 default ABI_64
262 help
263 Choose the target system ABI to use
264
265 config ABI_32
266 bool "o32"
267
268 config ABI_N32
269 bool "n32"
270
271 config ABI_64
272 bool "n64"
273 endchoice
274
275 config TARGET
276 string
277 default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
278 default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
279 default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
280
281 default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
282 default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
283 default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
284
285 default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 || DATA_MULTI)
286
287 default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
288 default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
289 default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 || DATA_MULTI)
290 default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 || DATA_MULTI)
291
292 default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
293 default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
294 default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
295 default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
296
297 default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
298 default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI || DATA_64)
299
300 default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
301 default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
302
303 default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
304 default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
305 default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
306
307 default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
308
309 default "arm-unknown-linux-uclibc" if PROC_ARM
310 default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
311 default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
312
313 default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
314 default "alphaev5-unknown-linux-gnu" if PROC_EV5
315 default "alphaev56-unknown-linux-gnu" if PROC_EV56
316 default "alphapca56-unknown-linux-gnu" if PROC_PCA56
317 default "alphapca57-unknown-linux-gnu" if PROC_PCA57
318 default "alphaev6-unknown-linux-gnu" if PROC_EV6
319 default "alphaev67-unknown-linux-gnu" if PROC_EV67
320 default "alphaev68-unknown-linux-gnu" if PROC_EV68
321
322 config TARGET32
323 string
324 depends DATA_MULTI
325 default "i686-pc-linux-gnu" if ARCH_X86
326 default "mipsel-unknown-linux-gnu" if PROC_mipsel
327 default "mips-unknown-linux-gnu" if PROC_mips
328 default "sparc-unknown-linux-gnu" if ARCH_SPARC
329 default "powerpc-unknown-linux-gnu" if ARCH_PPC
330
331 config PLATFORM
332 string
333 default "GENERIC" if (!BOOK_CLFS3) || PLATFORM_GENERIC
334 default "WRT - Wireless Router" if PLATFORM_WRT
335
336 config SPARC64_PROC
337 string
338 default "none" if !(ARCH_SPARC && (DATA_64 || DATA_MULTI))
339 default "1" if PROC_ULTRA1
340 default "2" if PROC_ULTRA2
341 default "3" if PROC_ULTRA3
342
343 config ARCH
344 string
345 default "x86" if ARCH_X86 && (DATA_32 || BOOK_CLFS2 || BOOK_CLFS3)
346 default "x86_64" if ARCH_X86 && DATA_MULTI
347 default "x86_64-64" if ARCH_X86 && DATA_64
348
349 default "wrt" if PLATFORM_WRT && BOOK_CLFS3
350
351 default "mips" if ARCH_MIPS && (DATA_32 || BOOK_CLFS3)
352 default "mips64" if ARCH_MIPS && DATA_MULTI
353 default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
354
355
356 default "ppc" if ARCH_PPC && DATA_32
357 default "ppc64" if ARCH_PPC && DATA_MULTI
358 default "ppc64-64" if ARCH_PPC && DATA_64
359
360 default "sparc" if ARCH_SPARC && DATA_32
361 default "sparc64" if ARCH_SPARC && DATA_MULTI
362 default "sparc64-64" if ARCH_SPARC && DATA_64
363
364 default "alpha" if ARCH_ALPHA
365 default "arm" if ARCH_ARM
366 default "hppa" if ARCH_HPPA
367
368 config MIPS_LEVEL
369 string
370 depends BOOK_CLFS3 && ARCH_MIPS
371 default "1" if DATA_32
372 default "3" if DATA_64
373
374 config ABI
375 string
376 depends BOOK_CLFS3
377 default "-m32" if ARCH_X86 || ARCH_ARM
378# default "-m64" if NO USED YET IN THE BOOK
379 default "-mabi=32" if ABI_32 || (ARCH_MIPS && DATA_32)
380 default "-mabi=n32" if ABI_N32
381 default "-mabi=64" if ABI_64
382
383 config ENDIAN
384 string
385 depends BOOK_CLFS3 && (ARCH_MIPS || ARCH_ARM)
386 default "little" if PROC_mipsel || PROC_ARM || PROC_ARM5L
387 default "big" if PROC_mips || PROC_ARM5B
388
389 choice
390 prompt "Build method"
391 depends BOOK_CLFS
392 help
393 What build method should be used: a chroot jail or minimal boot
394 system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
395 a full explanation.
396
397 config BUILD_CHROOT
398 bool "chroot"
399
400 config BUILD_BOOT
401 bool "boot"
402 endchoice
403
404 config METHOD
405 string
406 default "chroot" if BUILD_CHROOT
407 default "boot" if BUILD_BOOT
408
409 config BOOT_CONFIG
410 string "BOOT kernel config file (mandatory)"
411 default "***EDIT ME***"
412 depends on BUILD_BOOT
413 help
414 If METHOD=boot, location of boot-kernel config file
415 The config file will be copied to ${BUILD_DIR}/sources
416 and renamed 'bootkernel-config'
417 NOTE: this setting is required
418 #--- End CLFS specific params
419
420 #--- blfs-tool Support
421 config BLFS_TOOL
422 bool "Add blfs-tool support"
423 default n
424 depends on !BOOK_CLFS3 && !BOOK_BLFS
425 help
426 Activating this option will install additional packages needed
427 to use blfs tools after booting the new system.
428 The blfs-tool files will be installed under $BUILD_DIR/blfs_root
429 (see below).
430 After booting the new xLFS system, but before using the blfs tools,
431 you should create a user account, move the /blfs_root directory
432 to that user's home, and change its ownership to that of the user.
433 Also, be sure to give the user read and write access on the
434 $TRACKING_DIR directory and the files that it contains.
435 Don't forget to configure sudo properly on the new system.
436
437 config DUMMY # Avoid indenting the items below
438 bool
439
440 if BLFS_TOOL
441 menu "blfs-tool dependencies"
442
443 config DEP_LIBXML
444 bool "libxml2 (required)"
445 default y
446
447 config DEP_LIBXSLT
448 bool "libxslt (required)"
449 default y
450
451 config DEP_DBXML
452 bool "DocBook XML DTD (required)"
453 default y
454
455 config DEP_LYNX
456 bool "lynx (optional, for reading the generated book)"
457 default y
458
459 config DEP_SUDO
460 bool "sudo (recommended)"
461 default y
462
463 config DEP_WGET
464 bool "wget (recommended)"
465 default y
466
467 config DEP_GPM
468 bool "GPM (optional, see help)"
469 default n
470 help
471 if you install gpm, it will be started
472 automatically on boot. You'll have to edit
473 /etc/sysconfig/mouse for your system
474
475 config DEP_SVN
476 bool "SVN client (optional, see help)"
477 default n
478 help
479 Subversion is needed for updating the book
480 sources. If you want ssl support, select
481 OPENSSL below.
482
483 config DEP_OPENSSL
484 bool "OPENSSL (optional, see help)"
485 default n
486 help
487 selecting OPENSSL here allows to build
488 subversion with ssl support, avoiding a later
489 recompilation
490
491 config DEP_PYTHON
492 bool "PYTHON 2 (optional, see help)"
493 default n
494 help
495 selecting PYTHON 2 here allows to build
496 the libxml2 and libxslt python modules,
497 avoiding a later recompilation
498
499 endmenu
500
501 choice
502 prompt "BLFS Release"
503 default BLFS_SVN
504
505 config BLFS_SVN
506 bool "BLFS SVN"
507 help
508 Current development version as in trunk
509
510 config BLFS_WORKING_COPY
511 bool "BLFS working copy"
512 help
513 A local working copy of the BLFS book.
514
515 config BLFS_BRANCH
516 bool "BLFS Branch or stable book"
517 help
518 A supported SVN branch or stable book release
519 endchoice
520
521 config BLFS_WC_LOCATION
522 string "Location of the local BLFS working copy (mandatory)"
523 default "**EDIT ME**"
524 depends on BLFS_WORKING_COPY
525 help
526 Full path to the BLFS book working copy"
527
528 config BLFS_BRANCH_ID
529 string "BLFS Book Version (mandatory)"
530 default "**EDIT ME**"
531 depends on BLFS_BRANCH
532 help
533 A list of valid branches and stable book IDs is available at
534 http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
535 endif
536 #--- End blfs-tool Support
537
538 #--- BLFS params (Used for installing the tools, either after a jhalfs run
539 # or directly)
540 config BLFS_ROOT
541 string "Root of the tools directory (see help)"
542 default "/blfs_root"
543 depends on BLFS_TOOL || BOOK_BLFS
544 help
545 Path to the directory where all required files and scripts
546 will be stored.
547
548 This path must begin with a slash, and:
549 - is relative to the user's HOME directory when installing the
550 blfs tools on an already existing LFS system.
551 - is relative to the root of the build directory (`/' in chroot)
552 when adding the tools after a jhalfs run
553
554 CAUTION: this directory will be removed if it already exists.
555
556 config BLFS_XML
557 string "BLFS sources directory (internal parameter)"
558 default "blfs-xml"
559 depends BLFS_TOOL || BOOK_BLFS
560 help
561 The directory name under $BLFS_ROOT where the BLFS
562 book sources will be copied or checked out. Do not change that
563 unless you know what you are doing...
564 # End of BLFS parameters
565
566 #--- Custom Tools support
567 config CUSTOM_TOOLS
568 depends !BOOK_BLFS
569 bool "Add custom tools support"
570 default n
571 help
572 Activating this option additional packages you create
573 will be installed after finished the xLFS system build.
574 #--- End Custom Tools support
575
576 #--- This direcotry is needed for blfs tools installation and custom tools
577 # As well.
578 config TRACKING_DIR
579 string "Installed packages database directory"
580 default "/var/lib/jhalfs/BLFS"
581 depends on BOOK_BLFS || BLFS_TOOL || CUSTOM_TOOLS
582 help
583 Full path to the directory where the database of
584 installed packages will be created.
585
586 If the blfs tools are installed on a running xLFS system,
587 the user must have enough privileges to create this directory.
588 It may be necessary to create the /var/lib/jhalfs directory as
589 root, and make it writable by the user before running this tool.
590
591 If you are installing the blfs tools as part of an xLFS build
592 and/or using the customized scripts feature, you will
593 need to fix this directory's permissions after booting
594 the new system.
595
596 Note that the user that will build the packages must
597 have read and write access to this directory.
598
599#--- End BOOK Settings
600endmenu
601
602menu "General Settings"
603depends !BOOK_BLFS
604
605 #--- Set User Account
606 config CONFIG_USER
607 bool "Change the default user/group and homedir for this build"
608 default n
609 help #-- Unprivileged user and group name
610 # If you do not have the privilege to create/delete
611 # users and groups you can specify your own
612 # user ID for the build
613 #
614 # default values for each book
615 # LFS lfs
616 # CLFS* clfs
617 # HLFS hlfs
618 #
619 # Also, if your host places users' home dirs into a
620 # directory other than /home you can specify it here.
621
622 config DEF_USER
623 string
624 default "lfs" if BOOK_LFS || BOOK_LFS_SYSD
625 default "clfs" if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
626 default "hlfs" if BOOK_HLFS
627
628 config SET_USER
629 string "User account"
630 depends CONFIG_USER
631 default DEF_USER
632
633 config CONFIG_GROUP
634 bool "Set Group?"
635 default n
636 depends CONFIG_USER
637
638 config SET_GROUP
639 string "GROUP account"
640 depends CONFIG_GROUP
641 default DEF_USER
642
643 config CONFIG_HOME
644 bool "Set home dir?"
645 default n
646 depends CONFIG_USER
647
648 config SET_HOME
649 string "Path to the directory under which the user's home directory will be created"
650 depends CONFIG_HOME
651 default "/home"
652
653 config LUSER
654 string
655 default DEF_USER if !CONFIG_USER
656 default SET_USER if CONFIG_USER
657
658 config LGROUP
659 string
660 default LUSER if !CONFIG_GROUP
661 default SET_GROUP if CONFIG_GROUP
662
663 config LHOME
664 string
665 default "/home" if !CONFIG_HOME
666 default SET_HOME if CONFIG_HOME
667 #--- End Set User Account
668
669 config BUILDDIR
670 string "Build Directory"
671 default "/mnt/build_dir"
672 help
673 #-- The directory where the created system will be located.
674 # NOTE: A working directory named jhalfs will be created
675 # here, so ensure this does not conflict with the jhalfs
676 # source directory.
677
678 config GETPKG
679 bool "Retrieve source files"
680 default n
681 help
682 #-- Download all packages and patches required by the selected book
683 # NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
684 # first and if necessary retrieves them from the 'net.
685 # Files will be transferred to $BUILDDIR/sources.
686
687 config SRC_ARCHIVE
688 string "Package Archive Directory"
689 default "$SRC_ARCHIVE"
690 depends GETPKG
691 help
692 #-- A local archive for packages/files (not $BUILDDIR/sources)
693 # Any missing file will be downloaded and archived here,
694 # if the user has the right privileges.
695
696 config RETRYSRCDOWNLOAD
697 bool "Retry on 'connection refused' failure"
698 default n
699 depends GETPKG
700 help
701 #-- Attempt to download a source package again if it fails
702 # with a 'connection refused' error. This can happen on
703 # servers that are overloaded.
704
705 config RETRYDOWNLOADCNT
706 int "Number of retry attempts on download failures"
707 default 20
708 depends GETPKG
709 help
710 #-- Number of times to retry a failed download.
711
712 config DOWNLOADTIMEOUT
713 int "Download timeout (in seconds)"
714 default 30
715 depends GETPKG
716 help
717 #-- Number of seconds to wait for a download to start before
718 # timing out.
719
720 config SERVER
721 string "FTP mirror"
722 default "http://ftp.osuosl.org"
723 depends GETPKG
724 help
725 #-- FTP mirror to download packages and patches if not found
726 # in $SRC_ARCHIVE
727 # As a last resort, the files will downloaded from upstream,
728 # if possible.
729
730 config RUNMAKE
731 bool "Run the makefile"
732 default n
733 help
734 #-- Automatically run the makefile once it has been created
735
736 config CLEAN
737 bool "Rebuild files"
738 default n
739 help
740 #-- Clean the build directory before performing any other task.
741 # The directory is cleaned only if it was populated by a
742 # previous JHALFS run.
743
744#--- End General Settings
745endmenu
746
747menu "Build Settings"
748depends !BOOK_BLFS
749
750 #--- Test Suites
751 config CONFIG_TESTS
752 bool "Run testsuites"
753 depends !BOOK_CLFS2 && !BOOK_CLFS3
754 default y
755 help
756 #-- Run test suites
757 #
758 # You will have to select between:
759 #
760 # - Only final system Glibc, GCC and Binutils testsuites
761 # - All final system testsuites
762 # - Both temporary tools and final system testsuites
763 #
764 # HLFS and CLFS have no testsuites available in the
765 # temporary tools phase
766
767 # You will be prompted also about the "flavour" of the
768 # testsuites run:
769 #
770 # - Don't stop on test suite failures
771 # - Abort the build at the first test suite failure
772 #
773
774 choice
775 prompt "Tests level"
776 depends CONFIG_TESTS
777 default TST_1
778
779 config TST_1
780 bool "Only final critical testsuites" if !BOOK_CLFS2 && !BOOK_CLFS3
781
782 config TST_2
783 bool "All final system testsuites"
784
785 config TST_3
786 bool "Both temporary tools and final system testsuites" if !BOOK_HLFS && !BOOK_CLFS
787 endchoice
788
789 config TEST
790 int
791 default "0" if !CONFIG_TESTS
792 default "1" if TST_1
793 default "2" if TST_2
794 default "3" if TST_3
795
796 choice
797 prompt "Flavour"
798 depends CONFIG_TESTS
799
800 config NO_BOMB
801 bool "Don't stop on testsuite failures"
802
803 config BOMB
804 bool "Abort the build on the first testsuite failure"
805 endchoice
806
807 config BOMB_TEST
808 bool
809 default n if NO_BOMB
810 default y if BOMB
811
812 #--- End Test Suites
813
814 #--- Package Management
815 config PKGMNGT
816 bool "Package management"
817 depends BOOK_LFS || BOOK_LFS_SYSD
818 default n
819 help
820 #-- Use package management
821 #
822 # If set, the packages in the final phase are built
823 # in a separate directory, PKG_DEST.
824 # You should provide a bash function for packing
825 # and installing the package.
826 # Also, you have to provide the instructions
827 # to build the package manager during the
828 # temporary tools phase, in the form of a
829 # sect1 of the book identical to a package
830 # sect1. See README.PACKAGE_MANAGEMENT
831 #
832 # For now, this only works with LFS
833
834 #--- End package management
835
836 #--- Installed files logs
837 config INSTALL_LOG
838 bool "Create a log of installed files for each package"
839 default n
840 help
841 #-- Select this if you want to create logs of the files
842 # installed by each package on the final system.
843
844 #--- End Installed files logs
845
846 #--- FSTAB
847 config HAVE_FSTAB
848 bool "Use a custom fstab file"
849 default n
850 help
851 #-- Select this if you have an fstab file with entries
852 # for the target system
853
854 config FSTAB
855 string "Fstab file (optional)"
856 default "***EDIT ME***"
857 depends on HAVE_FSTAB
858 help
859 #-- The location of fstab file (if empty, a template is created)
860 #--- End FSTAB
861
862 #--- Kernel
863 config CONFIG_BUILD_KERNEL
864 bool "Build the kernel"
865 default n
866 help
867 #-- Select this option if you wish to build the kernel.
868 #
869 # You will be prompted for the full path to the .config
870 # file. It will be copied to the 'sources' directory and
871 # renamed kernel-config
872
873 config CONFIG
874 string "Kernel config file"
875 default "***EDIT ME***"
876 depends on CONFIG_BUILD_KERNEL
877 help
878 #-- Fully qualified path to a kernel config file
879 # The config file will be copied to ${BUILD_DIR}/sources
880 # and renamed 'kernel-config'
881 #--- End Kernel
882
883 config STRIP
884 bool "Strip Installed Binaries/Libraries"
885 default n
886 depends on !BOOK_CLFS3
887
888 config VIMLANG
889 bool "Install vim-lang package"
890 default n
891 depends on !BOOK_HLFS && !BOOK_CLFS3
892 help
893 #-- Install the optional vim-lang package
894 # NOTE: This option is obsolete with the 7.3 release of Vim
895 # which is included in all recent releases of LFS.
896
897 config NO_PROGRESS_BAR
898 bool "DO NOT use/display progress_bar "
899 default n
900 help
901 #-- Do not use the progress bar routine. On slower machines
902 # this function consumes precious CPU cycles.
903
904 config TIMEZONE
905 string "TimeZone"
906 default "GMT"
907 help
908 #-- The timezone as output by tzselect
909 # This will be copied to /etc/localtime
910
911 config LANG
912 string "Language"
913 default "$LANG"
914 help
915 #-- LANG variable set in /etc/profile
916 # See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
917 # for values (or the file localedata/SUPPORTED in glibc tarball)
918
919 config FULL_LOCALE
920 bool "Install the full set of locales"
921 default n
922 help
923 #-- If set to y, the full set of supported locales
924 # will be installed. Otherwise, only the minimal set
925 # necessary for the tests will be installed,
926 # together with the locale associated with the
927 # LANG you have chosen, if not in the minimal set.
928
929 #--- Groff page
930 choice
931 prompt "Groff page size"
932 default PAGE_LETTER
933 help
934 #-- Page definition for groff: letter or A4
935
936 config PAGE_LETTER
937 bool "letter"
938
939 config PAGE_A4
940 bool "A4"
941 endchoice
942
943 config PAGE
944 string
945 default "letter" if PAGE_LETTER
946 default "A4" if PAGE_A4
947 #--- End Groff page
948
949#--- End Build Settings
950endmenu
951
952menu "Advanced Features"
953depends !BOOK_BLFS
954
955 config REPORT
956 depends !PKGMNGT
957 bool "Create SBU and disk usage report"
958 default y
959
960 #--- ICA/farce
961 config COMPARE
962 bool "Run comparison analysis on final stage"
963 depends !BOOK_CLFS2 && !BOOK_CLFS3
964 default n
965 help
966 #-- Should an iterative comparison analysis be performed?
967 #
968 # Unless you are familiar with ICA and/or FARCE do not
969 # select this option
970 #
971 # ICA and FARCE are analysis tools for comparing one
972 # build to the next. Builds mays differ from one iteration
973 # to another due to the build order and these tools try
974 # to ferret out those differences by examining the stored
975 # build logs and binary files.
976 #
977 # The scripts are well commented and can be found in ./extras/*
978 #
979
980 config ITERATIONS
981 int "Number of test runs (2,3,4,5)" if COMPARE
982 depends on COMPARE
983 range 2 5
984 default 3
985
986 config RUN_ICA
987 bool "ICA testing"
988 depends on COMPARE
989 default y
990 help
991 #-- Run ICA testing
992
993 config RUN_FARCE
994 bool "farce testing"
995 depends on COMPARE
996 default n
997 help
998 #-- Run farce testing
999 #--- End ICA/farce
1000
1001 #--- Optimizations
1002if !BOOK_CLFS2 && !BOOK_CLFS3
1003 config CONFIG_OPTIMIZE
1004 bool "Optimization and parallelization"
1005 default n
1006 help
1007 # Opens a menu for various optimization settings:
1008 # Actual optimization flags MUST be defined in ./optimize/*
1009 # before activating this option.
1010 #
1011 # WARNING: The use of build optimizations may lead to build issues.
1012 # If the system doesn't work as expected, please rebuild
1013 # without optimizations before asking for support.
1014 menu "Optimization settings"
1015 depends on CONFIG_OPTIMIZE
1016
1017 config N_PARALLEL
1018 int "Number of parallel `make' jobs"
1019 default 1
1020 help
1021 #-- The usual recommandation is (number of CPU cores)+1
1022 # Do not set for meaningful SBU calculations.
1023
1024 choice
1025 prompt "Optimization level "
1026 default OPT_1
1027 help
1028 #-- Optimization values are set in optimize/* files
1029
1030 config OPT_1
1031 bool "Final system only"
1032
1033 config OPT_2
1034 bool "Both temp tools and final system"
1035
1036 config OPT_3
1037 bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
1038 endchoice
1039endmenu
1040 config OPTIMIZE
1041 int
1042 default "0" if !CONFIG_OPTIMIZE
1043 default "1" if OPT_1
1044 default "2" if OPT_2
1045 default "3" if OPT_3
1046endif
1047 #--- End Optimizations
1048
1049 #-- Internal Settings
1050 menu "Internal Settings (WARNING: for jhalfs developers only)"
1051
1052 config SCRIPT_ROOT
1053 string "Scripts root"
1054 default "jhalfs"
1055
1056 config JHALFSDIR
1057 string "jhalfs directory"
1058 default "$BUILDDIR/$SCRIPT_ROOT"
1059
1060 config LOGDIRBASE
1061 string "Build logs directory basename"
1062 default "logs"
1063
1064 config LOGDIR
1065 string "Build logs directory"
1066 default "$JHALFSDIR/$LOGDIRBASE"
1067
1068 config TESTLOGDIRBASE
1069 string "Test suites logs directory basename"
1070 default "test-logs"
1071
1072 config TESTLOGDIR
1073 string "Test suites logs directory"
1074 default "$JHALFSDIR/$TESTLOGDIRBASE"
1075
1076 config FILELOGDIRBASE
1077 string "Installed files logs directory basename"
1078 default "installed-files"
1079
1080 config FILELOGDIR
1081 string "Installed files logs directory"
1082 default "$JHALFSDIR/$FILELOGDIRBASE"
1083
1084 config ICALOGDIR
1085 string "ICA logs directory"
1086 default "$LOGDIR/ICA"
1087
1088 config FARCELOGDIR
1089 string "farce logs directory"
1090 default "$LOGDIR/farce"
1091
1092 config MKFILE
1093 string "Makefile"
1094 default "$JHALFSDIR/Makefile"
1095
1096 config XSL
1097 string "XSL stylesheet"
1098 default "$PROGNAME.xsl"
1099
1100 config PKG_LST
1101 string "Package contents list"
1102 default "unpacked"
1103
1104 #--- End Internal Settings
1105 endmenu
1106
1107#--- End Advanced Features
1108endmenu
1109
1110config REBUILD_MAKEFILE
1111 depends !BOOK_BLFS
1112 bool "Rebuild the Makefile (see help)"
1113 default n
1114 help
1115 #-- Rebuild the Makefile
1116 #
1117 # This option allows to rebuild the Makefile after
1118 # customizing the base system build scripts.
1119 #
1120 # See README.CUSTOM for more info about this feature.
1121
Note: See TracBrowser for help on using the repository browser.